1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
4 source "drivers/net/bnxt/Kconfig"
10 bool "Enable Driver Model for Ethernet drivers"
13 Enable driver model for Ethernet.
15 The eth_*() interface will be implemented by the UCLASS_ETH class
16 This is currently implemented in net/eth-uclass.c
17 Look in include/net.h for details.
20 bool "Enable Driver Model for MDIO devices"
21 depends on DM_ETH && PHYLIB
23 Enable driver model for MDIO devices
25 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
26 stand-alone devices. Useful in particular for systems that support
27 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
29 This is currently implemented in net/mdio-uclass.c
30 Look in include/miiphy.h for details.
33 bool "Enable Driver Model for MDIO MUX devices"
36 Enable driver model for MDIO MUX devices
38 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
39 systems that support DM_MDIO and integrate one or multiple muxes on
41 This is currently implemented in net/mdio-mux-uclass.c
42 Look in include/miiphy.h for details.
45 bool "Enable Driver Model for DSA switches"
46 depends on DM_ETH && DM_MDIO
49 Enable driver model for DSA switches
51 Adds UCLASS_DSA class supporting switches that follow the Distributed
52 Switch Architecture (DSA). These switches rely on the presence of a
53 management switch port connected to an Ethernet controller capable of
54 receiving frames from the switch. This host Ethernet controller is
55 called the "master" Ethernet interface in DSA terminology.
56 This is currently implemented in net/dsa-uclass.c, refer to
57 include/net/dsa.h for API details.
60 depends on DM_MDIO && SANDBOX
62 bool "Sandbox: Mocked MDIO driver"
64 This driver implements dummy read/write/reset MDIO functions mimicking
65 a bus with a single PHY.
67 This driver is used in for testing in test/dm/mdio.c
69 config MDIO_MUX_SANDBOX
70 depends on DM_MDIO_MUX && MDIO_SANDBOX
72 bool "Sandbox: Mocked MDIO-MUX driver"
74 This driver implements dummy select/deselect ops mimicking a MUX on
75 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
77 This driver is used for testing in test/dm/mdio.c
80 bool "Enable Driver Model for Ethernet Generic PHY drivers"
83 Enable driver model for Ethernet Generic PHY .
86 depends on DM_DSA && SANDBOX
88 bool "Sandbox: Mocked DSA driver"
90 This driver implements a dummy DSA switch connected to a dummy sandbox
91 Ethernet device used as DSA master, to test DSA class code, including
92 exported DSA API and datapath processing of Ethernet traffic.
95 bool "Network device support"
99 You must select Y to enable any network device support
100 Generally if you have any networking support this is a given
107 bool "Enable GbE PHY status parsing and configuration"
109 Enables support for parsing the status output and for
110 configuring GbE PHYs (affects the inner workings of some
111 commands and miiphyutil.c).
114 bool "Atheros AG7xxx Ethernet MAC support"
115 depends on DM_ETH && ARCH_ATH79
118 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
119 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
123 bool "Altera Triple-Speed Ethernet MAC support"
127 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
128 Please find details on the "Triple-Speed Ethernet MegaCore Function
129 Resource Center" of Altera.
132 bool "Broadcom SF2 (Starfighter2) Ethernet support"
135 This is an abstract framework which provides a generic interface
136 to MAC and DMA management for multiple Broadcom SoCs such as
137 Cygnus, NSP and bcm28155_ap platforms.
139 config BCM_SF2_ETH_DEFAULT_PORT
140 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
141 depends on BCM_SF2_ETH
144 Default port number for the Starfighter2 ethernet driver.
146 config BCM_SF2_ETH_GMAC
147 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
148 depends on BCM_SF2_ETH
150 This flag enables the ethernet support for Broadcom platforms with
151 GMAC such as Cygnus. This driver is based on the framework provided
152 by the BCM_SF2_ETH driver.
153 Say Y to any bcmcygnus based platforms.
156 bool "BCM6348 EMAC support"
157 depends on DM_ETH && ARCH_BMIPS
163 This driver supports the BCM6348 Ethernet MAC.
166 bool "BCM6368 EMAC support"
167 depends on DM_ETH && ARCH_BMIPS
171 This driver supports the BCM6368 Ethernet MAC.
174 bool "BCMGENET V5 support"
178 This driver supports the BCMGENET Ethernet MAC.
180 config CORTINA_NI_ENET
181 bool "Cortina-Access Ethernet driver"
182 depends on DM_ETH && CORTINA_PLATFORM
184 This driver supports the Cortina-Access Ethernet MAC for
185 all supported CAxxxx SoCs.
188 bool "Calxeda XGMAC support"
191 This driver supports the XGMAC in Calxeda Highbank and Midway
195 bool "Synopsys DWC Ethernet QOS device support"
199 This driver supports the Synopsys Designware Ethernet QOS (Quality
200 Of Service) IP block. The IP supports many options for bus type,
201 clocking/reset structure, and feature list.
203 config DWC_ETH_QOS_IMX
204 bool "Synopsys DWC Ethernet QOS device support for IMX"
205 depends on DWC_ETH_QOS
207 The Synopsys Designware Ethernet QOS IP block with the specific
208 configuration used in IMX soc.
210 config DWC_ETH_QOS_STM32
211 bool "Synopsys DWC Ethernet QOS device support for STM32"
212 depends on DWC_ETH_QOS
214 default y if ARCH_STM32MP
216 The Synopsys Designware Ethernet QOS IP block with the specific
217 configuration used in STM32MP soc.
219 config DWC_ETH_QOS_TEGRA186
220 bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
221 depends on DWC_ETH_QOS
222 default y if TEGRA186
224 The Synopsys Designware Ethernet QOS IP block with specific
225 configuration used in NVIDIA's Tegra186 chip.
228 bool "Intel PRO/1000 Gigabit Ethernet support"
230 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
231 adapters. For more information on how to identify your adapter, go
232 to the Adapter & Driver ID Guide at:
234 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
236 config E1000_SPI_GENERIC
237 bool "Allow access to the Intel 8257x SPI bus"
240 Allow generic access to the SPI bus on the Intel 8257x, for
241 example with the "sspi" command.
244 bool "Enable SPI bus utility code"
247 Utility code for direct access to the SPI bus on Intel 8257x.
248 This does not do anything useful unless you set at least one
249 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
252 bool "Enable the e1000 command"
255 This enables the 'e1000' management command for E1000 devices. When
256 used on devices with SPI support you can reprogram the EEPROM from
260 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
262 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
263 ethernet family of adapters.
266 depends on DM_ETH && SANDBOX
268 bool "Sandbox: Mocked Ethernet driver"
270 This driver simply responds with fake ARP replies and ping
271 replies that are used to verify network stack functionality
273 This driver is particularly useful in the test/dm/eth.c tests
275 config ETH_SANDBOX_RAW
276 depends on DM_ETH && SANDBOX
278 bool "Sandbox: Bridge to Linux Raw Sockets"
280 This driver is a bridge from the bottom of the network stack
281 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
282 network traffic to be tested from within sandbox. See
283 doc/arch/index.rst for more details.
285 config ETH_DESIGNWARE
286 bool "Synopsys Designware Ethernet MAC"
288 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
290 This MAC is present in SoCs from various vendors. It supports
291 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
292 provide the PHY (physical media interface).
294 config ETH_DESIGNWARE_MESON8B
295 bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
297 select ETH_DESIGNWARE
299 This provides glue layer to use Synopsys Designware Ethernet MAC
300 present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
302 config ETH_DESIGNWARE_SOCFPGA
305 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
306 depends on DM_ETH && ETH_DESIGNWARE
308 The Altera SoCFPGA requires additional configuration of the
309 Altera system manager to correctly interface with the PHY.
310 This code handles those SoC specifics.
312 config ETH_DESIGNWARE_S700
313 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
314 depends on DM_ETH && ETH_DESIGNWARE
316 This provides glue layer to use Synopsys Designware Ethernet MAC
317 present on Actions S700 SoC.
320 bool "OpenCores 10/100 Mbps Ethernet MAC"
322 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
324 config FEC_MXC_SHARE_MDIO
325 bool "Share the MDIO bus for FEC controller"
328 config FEC_MXC_MDIO_BASE
329 hex "MDIO base address for the FEC controller"
330 depends on FEC_MXC_SHARE_MDIO
332 This specifies the MDIO registers base address. It is used when
333 two FEC controllers share MDIO bus.
336 bool "FEC Ethernet controller"
337 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
339 This driver supports the 10/100 Fast Ethernet controller for
343 bool "Freescale FMan ethernet support"
344 depends on ARM || PPC
346 This driver support the Freescale FMan Ethernet controller
348 config SYS_FMAN_FW_ADDR
349 hex "FMAN Firmware Address"
353 config SYS_QE_FMAN_FW_LENGTH
354 hex "FMAN QE Firmware length"
355 depends on FMAN_ENET || QE || U_QE
359 bool "Ftmac100 Ethernet Support"
361 This MAC is present in Andestech SoCs.
364 bool "Ftgmac100 Ethernet Support"
368 This driver supports the Faraday's FTGMAC100 Gigabit SoC
369 Ethernet controller that can be found on Aspeed SoCs (which
372 It is fully compliant with IEEE 802.3 specification for
373 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
374 Mbps Ethernet and includes Reduced Media Independent
375 Interface (RMII) and Reduced Gigabit Media Independent
376 Interface (RGMII) interfaces. It adopts an AHB bus interface
377 and integrates a link list DMA engine with direct M-Bus
378 accesses for transmitting and receiving packets. It has
379 independent TX/RX fifos, supports half and full duplex (1000
380 Mbps mode only supports full duplex), flow control for full
381 duplex and backpressure for half duplex.
383 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
384 and supports IEEE 802.1Q VLAN tag insertion and removal. It
385 offers high-priority transmit queue for QoS and CoS
390 bool "ColdFire Ethernet Support"
394 This driver supports the network interface units in the
398 bool "ColdFire DMA Ethernet Support"
402 This driver supports the network interface units in the
406 bool "Microchip KS8851-MLL controller driver"
408 The Microchip KS8851 parallel bus external ethernet interface chip.
412 config KS8851_MLL_BASEADDR
413 hex "Microchip KS8851-MLL Base Address"
415 Define this to hold the physical address of the device (I/O space)
420 bool "Microchip KSZ9477 I2C controller driver"
421 depends on DM_DSA && DM_I2C
423 This driver implements a DSA switch driver for the KSZ9477 family
424 of GbE switches using the I2C interface.
427 bool "Marvell Orion5x/Kirkwood network interface support"
428 depends on ARCH_KIRKWOOD || ARCH_ORION5X
429 select PHYLIB if DM_ETH
431 This driver supports the network interface units in the
432 Marvell Orion5x and Kirkwood SoCs
435 bool "Marvell Armada XP/385/3700 network interface support"
436 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
439 This driver supports the network interface units in the
440 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
443 bool "Marvell Armada 375/7K/8K network interface support"
444 depends on ARMADA_375 || ARMADA_8K
449 This driver supports the network interface units in the
450 Marvell ARMADA 375, 7K and 8K SoCs.
453 bool "Cadence MACB/GEM Ethernet Interface"
456 The Cadence MACB ethernet interface is found on many Atmel
457 AT91 and SAMA5 parts. This driver also supports the Cadence
458 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
459 Say Y to include support for the MACB/GEM chip.
462 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
465 The Cadence MACB ethernet interface was used on Zynq platform.
466 Say Y to enable support for the MACB/GEM in Zynq chip.
469 bool "MediaTek MT7620 Ethernet Interface"
470 depends on SOC_MT7620
476 The MediaTek MT7620 ethernet interface is used on MT7620 based
477 boards. It has a built-in switch with two configurable ports which
478 can connect to external PHY/MACs.
481 bool "MediaTek MT7628 Ethernet Interface"
482 depends on SOC_MT7628
485 The MediaTek MT7628 ethernet interface is used on MT7628 and
489 bool "OcteonTX Ethernet support"
490 depends on ARCH_OCTEONTX
493 You must select Y to enable network device support for
494 OcteonTX SoCs. If unsure, say n
497 bool "OcteonTX2 Ethernet support"
498 depends on ARCH_OCTEONTX2
499 select OCTEONTX2_CGX_INTF
501 You must select Y to enable network device support for
502 OcteonTX2 SoCs. If unsure, say n
505 bool "OcteonTX SMI Device support"
506 depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
508 You must select Y to enable SMI controller support for
509 OcteonTX or OcteonTX2 SoCs. If unsure, say n
511 config OCTEONTX2_CGX_INTF
512 bool "OcteonTX2 CGX ATF interface support"
513 depends on ARCH_OCTEONTX2
514 default y if ARCH_OCTEONTX2
516 You must select Y to enable CGX ATF interface support for
517 OcteonTX2 SoCs. If unsure, say n
520 bool "Intel Platform Controller Hub EG20T GMAC driver"
524 This MAC is present in Intel Platform Controller Hub EG20T. It
525 supports 10/100/1000 Mbps operation.
530 Enable the support of the Reduced Gigabit Media-Independent
536 Enable support of the Media-Independent Interface (MII)
539 bool "AMD PCnet series Ethernet controller driver"
541 This driver supports AMD PCnet series fast ethernet family of
542 PCI chipsets/adapters.
544 source "drivers/net/qe/Kconfig"
547 bool "Realtek 8139 series Ethernet controller driver"
549 This driver supports Realtek 8139 series fast ethernet family of
550 PCI chipsets/adapters.
553 bool "Realtek 8169 series Ethernet controller driver"
555 This driver supports Realtek 8169 series gigabit ethernet family of
556 PCI/PCIe chipsets/adapters.
559 bool "NXP SJA1105 Ethernet switch family driver"
560 depends on DM_DSA && DM_SPI
563 This is the driver for the NXP SJA1105 automotive Ethernet switch
564 family. These are 5-port devices and are managed over an SPI
565 interface. Probing is handled based on OF bindings. The driver
566 supports the following revisions:
567 - SJA1105E (Gen. 1, No TT-Ethernet)
568 - SJA1105T (Gen. 1, TT-Ethernet)
569 - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
570 - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
571 - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
572 - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
575 bool "SMSC LAN911x and LAN921x controller driver"
581 hex "SMC911X Base Address"
583 Define this to hold the physical address
584 of the device (I/O space)
587 config SMC911X_32_BIT
588 bool "Enable SMC911X 32-bit interface"
590 Define this if data bus is 32 bits. If your processor use a
591 narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
592 words, leave this to "n".
597 bool "Enable Allwinner GMAC Ethernet support"
599 Enable the support for Sun7i GMAC Ethernet controller
601 config SUN7I_GMAC_FORCE_TXERR
602 bool "Force PA17 as gmac function"
603 depends on SUN7I_GMAC
605 Some ethernet phys needs TXERR control. Since the GMAC
606 doesn't have such signal, setting PA17 as GMAC function
607 makes the pin output low, which enables data transmission.
610 bool "Allwinner Sun4i Ethernet MAC support"
614 This driver supports the Allwinner based SUN4I Ethernet MAC.
617 bool "Allwinner Sun8i Ethernet MAC support"
622 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
623 It can be found in H3/A64/A83T based SoCs and compatible with both
624 External and Internal PHYs.
627 bool "Renesas SH Ethernet MAC"
630 This driver supports the Ethernet for Renesas SH and ARM SoCs.
632 source "drivers/net/ti/Kconfig"
635 bool "DEC Tulip DC2114x Ethernet support"
637 This driver supports DEC DC2114x Fast ethernet chips.
639 config XILINX_AXIEMAC
643 bool "Xilinx AXI Ethernet"
645 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
647 config XILINX_AXIMRMAC
648 depends on DM_ETH && ARCH_VERSAL
649 bool "Xilinx AXI MRMAC"
651 MRMAC is a high performance, low latency, adaptable Ethernet
652 integrated hard IP. This can be configured up to four ports with MAC
653 rates from 10GE to 100GE. This could be present in some of the Xilinx
656 config XILINX_EMACLITE
660 bool "Xilinx Ethernetlite"
662 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
667 bool "Xilinx Ethernet GEM"
669 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
672 bool "Microchip PIC32 Ethernet Support"
673 depends on DM_ETH && MACH_PIC32
676 This driver implements 10/100 Mbps Ethernet and MAC layer for
677 Microchip PIC32 microcontrollers.
680 bool "Rockchip Synopsys Designware Ethernet MAC"
681 depends on DM_ETH && ETH_DESIGNWARE
683 This driver provides Rockchip SoCs network support based on the
684 Synopsys Designware driver.
687 bool "Renesas Ethernet AVB MAC"
688 depends on DM_ETH && RCAR_GEN3
691 This driver implements support for the Ethernet AVB block in
692 Renesas M3 and H3 SoCs.
695 bool "Fast Ethernet Controller on MPC8XX"
699 This driver implements support for the Fast Ethernet Controller
703 bool "Socionext AVE Ethernet support"
704 depends on DM_ETH && ARCH_UNIPHIER
709 This driver implements support for the Socionext AVE Ethernet
710 controller, as found on the Socionext UniPhier family.
713 bool "Socionext NETSEC Ethernet support"
714 depends on DM_ETH && SYNQUACER_SPI
717 This driver implements support for the Socionext SynQuacer NETSEC
718 ethernet controller, as found on the Socionext SynQuacer family.
720 source "drivers/net/mscc_eswitch/Kconfig"
724 depends on MPC8XX_FEC
729 depends on ETHER_ON_FEC1
732 Define to the hardcoded PHY address which corresponds
733 to the given FEC; i. e.
734 #define CONFIG_FEC1_PHY 4
735 means that the PHY with address 4 is connected to FEC1
737 When set to -1, means to probe for first available.
741 depends on ETHER_ON_FEC1
743 The PHY does not have a RXERR line (RMII only).
744 (so program the FEC to ignore it).
748 depends on MPC8XX_FEC && MPC885
753 depends on ETHER_ON_FEC2
756 Define to the hardcoded PHY address which corresponds
757 to the given FEC; i. e.
758 #define CONFIG_FEC1_PHY 4
759 means that the PHY with address 4 is connected to FEC1
761 When set to -1, means to probe for first available.
763 config FEC2_PHY_NORXERR
765 depends on ETHER_ON_FEC2
767 The PHY does not have a RXERR line (RMII only).
768 (so program the FEC to ignore it).
770 config SYS_DPAA_QBMAN
771 bool "Device tree fixup for QBMan on freescale SOCs"
772 depends on (ARM || PPC) && !SPL_BUILD
773 default y if ARCH_B4860 || \
788 QBman fixups to allow deep sleep in DPAA 1 SOCs
792 bool "Enable Three-Speed Ethernet Controller"
794 This driver implements support for the (Enhanced) Three-Speed
795 Ethernet Controller found on Freescale SoCs.
798 bool "MediaTek Ethernet GMAC Driver"
804 This Driver support MediaTek Ethernet GMAC
805 Say Y to enable support for the MediaTek Ethernet GMAC.
807 config HIGMACV300_ETH
808 bool "HiSilicon Gigabit Ethernet Controller"
813 This driver supports HIGMACV300 Ethernet controller found on
817 bool "NXP ENETC Ethernet controller"
818 depends on DM_ETH && DM_MDIO
820 This driver supports the NXP ENETC Ethernet controller found on some
823 config MDIO_MUX_I2CREG
824 bool "MDIO MUX accessed as a register over I2C"
825 depends on DM_MDIO_MUX && DM_I2C
827 This driver is used for MDIO muxes driven by writing to a register of
828 an I2C chip. The board it was developed for uses a mux controlled by
829 on-board FPGA which in turn is accessed as a chip over I2C.
832 bool "Qualcomm IPQ4019 MDIO interface support"
835 This driver supports the MDIO interface found in Qualcomm
836 IPQ40xx series Soc-s.
839 bool "Marvell MDIO interface support"
842 This driver supports the MDIO interface found in the network
843 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
844 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
846 This driver is used by the MVPP2 and MVNETA drivers.
849 bool "NXP Layerscape MDIO interface support"
852 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
853 on the mEMAC (which supports both Clauses 22 and 45).
856 bool "Aspeed MDIO interface support"
859 This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
860 currently supports Clause 22.
862 config MDIO_MUX_MMIOREG
863 bool "MDIO MUX accessed as a MMIO register access"
864 depends on DM_MDIO_MUX
866 This driver is used for MDIO muxes driven by writing to a register in
867 the MMIO physical memory.
869 config MDIO_MUX_MESON_G12A
870 bool "MDIO MUX for Amlogic Meson G12A SoCs"
871 depends on DM_MDIO_MUX
873 This driver is used for the MDIO mux found on the Amlogic G12A & compatible