1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 depends on DM_MDIO && SANDBOX
43 bool "Sandbox: Mocked MDIO driver"
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
48 This driver is used in for testing in test/dm/mdio.c
50 config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
53 bool "Sandbox: Mocked MDIO-MUX driver"
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
58 This driver is used for testing in test/dm/mdio.c
61 bool "Enable Driver Model for Ethernet Generic PHY drivers"
64 Enable driver model for Ethernet Generic PHY .
67 bool "Network device support"
71 You must select Y to enable any network device support
72 Generally if you have any networking support this is a given
79 bool "Enable GbE PHY status parsing and configuration"
81 Enables support for parsing the status output and for
82 configuring GbE PHYs (affects the inner workings of some
83 commands and miiphyutil.c).
86 bool "Atheros AG7xxx Ethernet MAC support"
87 depends on DM_ETH && ARCH_ATH79
90 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
91 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
95 bool "Altera Triple-Speed Ethernet MAC support"
99 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
100 Please find details on the "Triple-Speed Ethernet MegaCore Function
101 Resource Center" of Altera.
104 bool "Broadcom SF2 (Starfighter2) Ethernet support"
107 This is an abstract framework which provides a generic interface
108 to MAC and DMA management for multiple Broadcom SoCs such as
109 Cygnus, NSP and bcm28155_ap platforms.
111 config BCM_SF2_ETH_DEFAULT_PORT
112 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
113 depends on BCM_SF2_ETH
116 Default port number for the Starfighter2 ethernet driver.
118 config BCM_SF2_ETH_GMAC
119 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
120 depends on BCM_SF2_ETH
122 This flag enables the ethernet support for Broadcom platforms with
123 GMAC such as Cygnus. This driver is based on the framework provided
124 by the BCM_SF2_ETH driver.
125 Say Y to any bcmcygnus based platforms.
128 bool "BCM6348 EMAC support"
129 depends on DM_ETH && ARCH_BMIPS
135 This driver supports the BCM6348 Ethernet MAC.
138 bool "BCM6368 EMAC support"
139 depends on DM_ETH && ARCH_BMIPS
143 This driver supports the BCM6368 Ethernet MAC.
146 bool "BCMGENET V5 support"
150 This driver supports the BCMGENET Ethernet MAC.
153 bool "Synopsys DWC Ethernet QOS device support"
157 This driver supports the Synopsys Designware Ethernet QOS (Quality
158 Of Service) IP block. The IP supports many options for bus type,
159 clocking/reset structure, and feature list. This driver currently
160 supports the specific configuration used in NVIDIA's Tegra186 chip,
161 but should be extensible to other combinations quite easily.
164 bool "Intel PRO/1000 Gigabit Ethernet support"
165 depends on (DM_ETH && DM_PCI) || !DM_ETH
167 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
168 adapters. For more information on how to identify your adapter, go
169 to the Adapter & Driver ID Guide at:
171 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
173 config E1000_SPI_GENERIC
174 bool "Allow access to the Intel 8257x SPI bus"
177 Allow generic access to the SPI bus on the Intel 8257x, for
178 example with the "sspi" command.
181 bool "Enable SPI bus utility code"
184 Utility code for direct access to the SPI bus on Intel 8257x.
185 This does not do anything useful unless you set at least one
186 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
189 bool "Enable the e1000 command"
192 This enables the 'e1000' management command for E1000 devices. When
193 used on devices with SPI support you can reprogram the EEPROM from
197 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
199 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
200 ethernet family of adapters.
203 depends on DM_ETH && SANDBOX
205 bool "Sandbox: Mocked Ethernet driver"
207 This driver simply responds with fake ARP replies and ping
208 replies that are used to verify network stack functionality
210 This driver is particularly useful in the test/dm/eth.c tests
212 config ETH_SANDBOX_RAW
213 depends on DM_ETH && SANDBOX
215 bool "Sandbox: Bridge to Linux Raw Sockets"
217 This driver is a bridge from the bottom of the network stack
218 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
219 network traffic to be tested from within sandbox. See
220 doc/arch/index.rst for more details.
222 config ETH_DESIGNWARE
223 bool "Synopsys Designware Ethernet MAC"
225 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
227 This MAC is present in SoCs from various vendors. It supports
228 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
229 provide the PHY (physical media interface).
231 config ETH_DESIGNWARE_SOCFPGA
234 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
235 depends on DM_ETH && ETH_DESIGNWARE
237 The Altera SoCFPGA requires additional configuration of the
238 Altera system manager to correctly interface with the PHY.
239 This code handles those SoC specifics.
241 config ETH_DESIGNWARE_S700
242 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
243 depends on DM_ETH && ETH_DESIGNWARE
245 This provides glue layer to use Synopsys Designware Ethernet MAC
246 present on Actions S700 SoC.
249 bool "OpenCores 10/100 Mbps Ethernet MAC"
251 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
253 config FEC_MXC_SHARE_MDIO
254 bool "Share the MDIO bus for FEC controller"
257 config FEC_MXC_MDIO_BASE
258 hex "MDIO base address for the FEC controller"
259 depends on FEC_MXC_SHARE_MDIO
261 This specifies the MDIO registers base address. It is used when
262 two FEC controllers share MDIO bus.
265 bool "FEC Ethernet controller"
266 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
268 This driver supports the 10/100 Fast Ethernet controller for
272 bool "Freescale FMan ethernet support"
273 depends on ARM || PPC
275 This driver support the Freescale FMan Ethernet controller
278 bool "Ftmac100 Ethernet Support"
280 This MAC is present in Andestech SoCs.
283 bool "Ftgmac100 Ethernet Support"
287 This driver supports the Faraday's FTGMAC100 Gigabit SoC
288 Ethernet controller that can be found on Aspeed SoCs (which
291 It is fully compliant with IEEE 802.3 specification for
292 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
293 Mbps Ethernet and includes Reduced Media Independent
294 Interface (RMII) and Reduced Gigabit Media Independent
295 Interface (RGMII) interfaces. It adopts an AHB bus interface
296 and integrates a link list DMA engine with direct M-Bus
297 accesses for transmitting and receiving packets. It has
298 independent TX/RX fifos, supports half and full duplex (1000
299 Mbps mode only supports full duplex), flow control for full
300 duplex and backpressure for half duplex.
302 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
303 and supports IEEE 802.1Q VLAN tag insertion and removal. It
304 offers high-priority transmit queue for QoS and CoS
309 bool "ColdFire Ethernet Support"
313 This driver supports the network interface units in the
317 bool "ColdFire DMA Ethernet Support"
321 This driver supports the network interface units in the
325 bool "Microchip KS8851-MLL controller driver"
327 The Microchip KS8851 parallel bus external ethernet interface chip.
331 config KS8851_MLL_BASEADDR
332 hex "Microchip KS8851-MLL Base Address"
334 Define this to hold the physical address of the device (I/O space)
339 bool "Marvell Orion5x/Kirkwood network interface support"
340 depends on ARCH_KIRKWOOD || ARCH_ORION5X
341 select PHYLIB if DM_ETH
343 This driver supports the network interface units in the
344 Marvell Orion5x and Kirkwood SoCs
347 bool "Marvell Armada XP/385/3700 network interface support"
348 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
351 This driver supports the network interface units in the
352 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
355 bool "Marvell Armada 375/7K/8K network interface support"
356 depends on ARMADA_375 || ARMADA_8K
361 This driver supports the network interface units in the
362 Marvell ARMADA 375, 7K and 8K SoCs.
365 bool "Cadence MACB/GEM Ethernet Interface"
369 The Cadence MACB ethernet interface is found on many Atmel
370 AT91 and SAMA5 parts. This driver also supports the Cadence
371 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
372 Say Y to include support for the MACB/GEM chip.
375 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
378 The Cadence MACB ethernet interface was used on Zynq platform.
379 Say Y to enable support for the MACB/GEM in Zynq chip.
382 bool "MediaTek MT7628 Ethernet Interface"
383 depends on SOC_MT7628
386 The MediaTek MT7628 ethernet interface is used on MT7628 and
390 bool "Intel Platform Controller Hub EG20T GMAC driver"
391 depends on DM_ETH && DM_PCI
394 This MAC is present in Intel Platform Controller Hub EG20T. It
395 supports 10/100/1000 Mbps operation.
400 Enable the support of the Reduced Gigabit Media-Independent
406 Enable support of the Media-Independent Interface (MII)
409 bool "AMD PCnet series Ethernet controller driver"
411 This driver supports AMD PCnet series fast ethernet family of
412 PCI chipsets/adapters.
415 bool "Realtek 8139 series Ethernet controller driver"
417 This driver supports Realtek 8139 series fast ethernet family of
418 PCI chipsets/adapters.
421 bool "Realtek 8169 series Ethernet controller driver"
423 This driver supports Realtek 8169 series gigabit ethernet family of
424 PCI/PCIe chipsets/adapters.
427 bool "SMSC LAN911x and LAN921x controller driver"
433 hex "SMC911X Base Address"
435 Define this to hold the physical address
436 of the device (I/O space)
440 prompt "SMC911X bus width"
441 default SMC911X_16_BIT
443 config SMC911X_32_BIT
444 bool "Enable 32-bit interface"
446 config SMC911X_16_BIT
447 bool "Enable 16-bit interface"
449 Define this if data bus is 16 bits. If your processor
450 automatically converts one 32 bit word to two 16 bit
451 words you may also try CONFIG_SMC911X_32_BIT.
457 bool "Enable Allwinner GMAC Ethernet support"
459 Enable the support for Sun7i GMAC Ethernet controller
461 config SUN7I_GMAC_FORCE_TXERR
462 bool "Force PA17 as gmac function"
463 depends on SUN7I_GMAC
465 Some ethernet phys needs TXERR control. Since the GMAC
466 doesn't have such signal, setting PA17 as GMAC function
467 makes the pin output low, which enables data transmission.
470 bool "Allwinner Sun4i Ethernet MAC support"
474 This driver supports the Allwinner based SUN4I Ethernet MAC.
477 bool "Allwinner Sun8i Ethernet MAC support"
482 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
483 It can be found in H3/A64/A83T based SoCs and compatible with both
484 External and Internal PHYs.
487 bool "Renesas SH Ethernet MAC"
490 This driver supports the Ethernet for Renesas SH and ARM SoCs.
492 source "drivers/net/ti/Kconfig"
495 bool "DEC Tulip DC2114x Ethernet support"
496 depends on (DM_ETH && DM_PCI) || !DM_ETH
498 This driver supports DEC DC2114x Fast ethernet chips.
500 config XILINX_AXIEMAC
501 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
504 bool "Xilinx AXI Ethernet"
506 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
508 config XILINX_EMACLITE
509 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
512 bool "Xilinx Ethernetlite"
514 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
517 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
519 bool "Xilinx Ethernet GEM"
521 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
524 bool "Microchip PIC32 Ethernet Support"
525 depends on DM_ETH && MACH_PIC32
528 This driver implements 10/100 Mbps Ethernet and MAC layer for
529 Microchip PIC32 microcontrollers.
532 bool "Rockchip Synopsys Designware Ethernet MAC"
533 depends on DM_ETH && ETH_DESIGNWARE
535 This driver provides Rockchip SoCs network support based on the
536 Synopsys Designware driver.
539 bool "Renesas Ethernet AVB MAC"
540 depends on DM_ETH && RCAR_GEN3
543 This driver implements support for the Ethernet AVB block in
544 Renesas M3 and H3 SoCs.
547 bool "Fast Ethernet Controller on MPC8XX"
551 This driver implements support for the Fast Ethernet Controller
555 bool "Socionext AVE Ethernet support"
556 depends on DM_ETH && ARCH_UNIPHIER
561 This driver implements support for the Socionext AVE Ethernet
562 controller, as found on the Socionext UniPhier family.
564 source "drivers/net/mscc_eswitch/Kconfig"
568 depends on MPC8XX_FEC
573 depends on ETHER_ON_FEC1
576 Define to the hardcoded PHY address which corresponds
577 to the given FEC; i. e.
578 #define CONFIG_FEC1_PHY 4
579 means that the PHY with address 4 is connected to FEC1
581 When set to -1, means to probe for first available.
585 depends on ETHER_ON_FEC1
588 The PHY does not have a RXERR line (RMII only).
589 (so program the FEC to ignore it).
593 depends on MPC8XX_FEC && MPC885
598 depends on ETHER_ON_FEC2
601 Define to the hardcoded PHY address which corresponds
602 to the given FEC; i. e.
603 #define CONFIG_FEC1_PHY 4
604 means that the PHY with address 4 is connected to FEC1
606 When set to -1, means to probe for first available.
608 config FEC2_PHY_NORXERR
610 depends on ETHER_ON_FEC2
613 The PHY does not have a RXERR line (RMII only).
614 (so program the FEC to ignore it).
616 config SYS_DPAA_QBMAN
617 bool "Device tree fixup for QBMan on freescale SOCs"
618 depends on (ARM || PPC) && !SPL_BUILD
619 default y if ARCH_B4860 || \
638 QBman fixups to allow deep sleep in DPAA 1 SOCs
642 bool "Enable Three-Speed Ethernet Controller"
644 This driver implements support for the (Enhanced) Three-Speed
645 Ethernet Controller found on Freescale SoCs.
648 bool "MediaTek Ethernet GMAC Driver"
654 This Driver support MediaTek Ethernet GMAC
655 Say Y to enable support for the MediaTek Ethernet GMAC.
657 config HIGMACV300_ETH
658 bool "HiSilicon Gigabit Ethernet Controller"
663 This driver supports HIGMACV300 Ethernet controller found on
667 bool "NXP ENETC Ethernet controller"
668 depends on DM_PCI && DM_ETH && DM_MDIO
670 This driver supports the NXP ENETC Ethernet controller found on some
673 config MDIO_MUX_I2CREG
674 bool "MDIO MUX accessed as a register over I2C"
675 depends on DM_MDIO_MUX && DM_I2C
677 This driver is used for MDIO muxes driven by writing to a register of
678 an I2C chip. The board it was developed for uses a mux controlled by
679 on-board FPGA which in turn is accessed as a chip over I2C.
682 bool "Marvell MDIO interface support"
685 This driver supports the MDIO interface found in the network
686 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
687 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
689 This driver is used by the MVPP2 and MVNETA drivers.
692 bool "NXP Layerscape MDIO interface support"
695 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
696 on the mEMAC (which supports both Clauses 22 and 45).