1 menu "SPI Flash Support"
4 bool "Enable Driver Model for SPI flash"
5 depends on DM && DM_SPI
7 Enable driver model for SPI flash. This SPI flash interface
8 (spi_flash_probe(), spi_flash_write(), etc.) is then
9 implemented by the SPI flash uclass. There is one standard
10 SPI flash driver which knows how to probe most chips
11 supported by U-Boot. The uclass interface is defined in
12 include/spi_flash.h, but is currently fully compatible
13 with the old interface to avoid confusion and duplication
14 during the transition parent. SPI and SPI flash must be
15 enabled together (it is not possible to use driver model
16 for one and not the other).
18 config SPI_FLASH_SANDBOX
19 bool "Support sandbox SPI flash device"
20 depends on SANDBOX && DM_SPI_FLASH
22 Since sandbox cannot access real devices, an emulation mechanism is
23 provided instead. Drivers can be connected up to the sandbox SPI
24 bus (see CONFIG_SANDBOX_SPI) and SPI traffic will be routed to this
25 device. Typically the contents of the emulated SPI flash device is
26 stored in a file on the host filesystem.
29 bool "Legacy SPI Flash Interface support"
31 Enable the legacy SPI flash support. This will include basic
32 standard support for things like probing, read / write, and
33 erasing through cmd_sf interface.
39 config SPI_FLASH_SFDP_SUPPORT
40 bool "SFDP table parsing support for SPI NOR flashes"
41 depends on !SPI_FLASH_BAR
43 Enable support for parsing and auto discovery of parameters for
44 SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
45 tables as per JESD216 standard.
48 bool "SPI flash Bank/Extended address register support"
50 Enable the SPI flash Bank/Extended address register support.
51 Bank/Extended address registers are used to access the flash
52 which has size > 16MiB in 3-byte addressing.
55 bool "SPI DUAL flash memory support"
57 Enable this option to support two flash memories connected to a single
58 controller. Currently Xilinx Zynq qspi supports this.
60 config SPI_FLASH_ATMEL
61 bool "Atmel SPI flash support"
63 Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
66 bool "EON SPI flash support"
68 Add support for various EON SPI flash chips (EN25xxx)
70 config SPI_FLASH_GIGADEVICE
71 bool "GigaDevice SPI flash support"
73 Add support for various GigaDevice SPI flash chips (GD25xxx)
76 bool "ISSI SPI flash support"
78 Add support for various ISSI SPI flash chips (ISxxx)
80 config SPI_FLASH_MACRONIX
81 bool "Macronix SPI flash support"
83 Add support for various Macronix SPI flash chips (MX25Lxxx)
85 config SPI_FLASH_SPANSION
86 bool "Spansion SPI flash support"
88 Add support for various Spansion SPI flash chips (S25FLxxx)
90 config SPI_FLASH_STMICRO
91 bool "STMicro SPI flash support"
93 Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
96 bool "SST SPI flash support"
98 Add support for various SST SPI flash chips (SST25xxx)
100 config SPI_FLASH_WINBOND
101 bool "Winbond SPI flash support"
103 Add support for various Winbond SPI flash chips (W25xxx)
106 bool "XMC SPI flash support"
108 Add support for various XMC (Wuhan Xinxin Semiconductor
109 Manufacturing Corp.) SPI flash chips (XM25xxx)
113 config SPI_FLASH_USE_4K_SECTORS
114 bool "Use small 4096 B erase sectors"
118 Many flash memories support erasing small (4096 B) sectors. Depending
119 on the usage this feature may provide performance gain in comparison
120 to erasing whole blocks (32/64 KiB).
121 Changing a small part of the flash's contents is usually faster with
122 small sectors. On the other hand erasing should be faster when using
123 64 KiB block instead of 16 × 4 KiB sectors.
125 Please note that some tools/drivers/filesystems may not work with
126 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
128 config SPI_FLASH_DATAFLASH
129 bool "AT45xxx DataFlash support"
130 depends on SPI_FLASH && DM_SPI_FLASH
132 Enable the access for SPI-flash-based AT45xxx DataFlash chips.
133 DataFlash is a kind of SPI flash. Most AT45 chips have two buffers
134 in each chip, which may be used for double buffered I/O; but this
135 driver doesn't (yet) use these for any kind of i/o overlap or prefetching.
137 Sometimes DataFlash is packaged in MMC-format cards, although the
138 MMC stack can't (yet?) distinguish between MMC and DataFlash
139 protocols during enumeration.
144 bool "SPI Flash MTD support"
147 Enable the MTD support for spi flash layer, this adapter is for
148 translating mtd_read/mtd_write commands into spi_flash_read/write
149 commands. It is not intended to use it within sf_cmd or the SPI
150 flash subsystem. Such an adapter is needed for subsystems like
151 UBI which can only operate on top of the MTD layer.
155 endmenu # menu "SPI Flash Support"