arm: Remove unused mx27 code
[platform/kernel/u-boot.git] / drivers / mtd / nand / raw / mxc_nand.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
4  */
5
6 #ifndef __MXC_NAND_H
7 #define __MXC_NAND_H
8
9 /*
10  * Register map and bit definitions for the Freescale NAND Flash Controller
11  * present in various i.MX devices.
12  *
13  * MX31 and MX27 have version 1, which has:
14  *      4 512-byte main buffers and
15  *      4 16-byte spare buffers
16  *      to support up to 2K byte pagesize nand.
17  *      Reading or writing a 2K page requires 4 FDI/FDO cycles.
18  *
19  * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
20  * have:
21  *      8 512-byte main buffers and
22  *      8 64-byte spare buffers
23  *      to support up to 4K byte pagesize nand.
24  *      Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
25  *      Also some of registers are moved and/or changed meaning as seen below.
26  */
27 #if defined(CONFIG_MX31)
28 #define MXC_NFC_V1
29 #define is_mxc_nfc_1()          1
30 #define is_mxc_nfc_21()         0
31 #define is_mxc_nfc_32()         0
32 #elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
33 #define MXC_NFC_V3
34 #define MXC_NFC_V3_2
35 #define is_mxc_nfc_1()          0
36 #define is_mxc_nfc_21()         0
37 #define is_mxc_nfc_32()         1
38 #else
39 #error "MXC NFC implementation not supported"
40 #endif
41 #define is_mxc_nfc_3()          is_mxc_nfc_32()
42
43 #if defined(MXC_NFC_V1)
44 #define NAND_MXC_NR_BUFS                4
45 #define NAND_MXC_SPARE_BUF_SIZE         16
46 #define NAND_MXC_REG_OFFSET             0xe00
47 #define NAND_MXC_2K_MULTI_CYCLE
48 #elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
49 #define NAND_MXC_NR_BUFS                8
50 #define NAND_MXC_SPARE_BUF_SIZE         64
51 #define NAND_MXC_REG_OFFSET             0x1e00
52 #endif
53
54 struct mxc_nand_regs {
55         u8 main_area[NAND_MXC_NR_BUFS][0x200];
56         u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
57         /*
58          * reserved size is offset of nfc registers
59          * minus total main and spare sizes
60          */
61         u8 reserved1[NAND_MXC_REG_OFFSET
62                 - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
63 #if defined(MXC_NFC_V1)
64         u16 buf_size;
65         u16 reserved2;
66         u16 buf_addr;
67         u16 flash_addr;
68         u16 flash_cmd;
69         u16 config;
70         u16 ecc_status_result;
71         u16 rsltmain_area;
72         u16 rsltspare_area;
73         u16 wrprot;
74         u16 unlockstart_blkaddr;
75         u16 unlockend_blkaddr;
76         u16 nf_wrprst;
77         u16 config1;
78         u16 config2;
79 #elif defined(MXC_NFC_V2_1)
80         u16 reserved2[2];
81         u16 buf_addr;
82         u16 flash_addr;
83         u16 flash_cmd;
84         u16 config;
85         u32 ecc_status_result;
86         u16 spare_area_size;
87         u16 wrprot;
88         u16 reserved3[2];
89         u16 nf_wrprst;
90         u16 config1;
91         u16 config2;
92         u16 reserved4;
93         u16 unlockstart_blkaddr;
94         u16 unlockend_blkaddr;
95         u16 unlockstart_blkaddr1;
96         u16 unlockend_blkaddr1;
97         u16 unlockstart_blkaddr2;
98         u16 unlockend_blkaddr2;
99         u16 unlockstart_blkaddr3;
100         u16 unlockend_blkaddr3;
101 #elif defined(MXC_NFC_V3_2)
102         u32 flash_cmd;
103         u32 flash_addr[12];
104         u32 config1;
105         u32 ecc_status_result;
106         u32 status_sum;
107         u32 launch;
108 #endif
109 };
110
111 #ifdef MXC_NFC_V3_2
112 struct mxc_nand_ip_regs {
113         u32 wrprot;
114         u32 wrprot_unlock_blkaddr[8];
115         u32 config2;
116         u32 config3;
117         u32 ipc;
118         u32 err_addr;
119         u32 delay_line;
120 };
121 #endif
122
123 /* Set FCMD to 1, rest to 0 for Command operation */
124 #define NFC_CMD                         0x1
125
126 /* Set FADD to 1, rest to 0 for Address operation */
127 #define NFC_ADDR                        0x2
128
129 /* Set FDI to 1, rest to 0 for Input operation */
130 #define NFC_INPUT                       0x4
131
132 /* Set FDO to 001, rest to 0 for Data Output operation */
133 #define NFC_OUTPUT                      0x8
134
135 /* Set FDO to 010, rest to 0 for Read ID operation */
136 #define NFC_ID                          0x10
137
138 /* Set FDO to 100, rest to 0 for Read Status operation */
139 #define NFC_STATUS                      0x20
140
141 #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
142 #define NFC_CONFIG1_SP_EN               (1 << 2)
143 #define NFC_CONFIG1_RST                 (1 << 6)
144 #define NFC_CONFIG1_CE                  (1 << 7)
145 #elif defined(MXC_NFC_V3_2)
146 #define NFC_CONFIG1_SP_EN               (1 << 0)
147 #define NFC_CONFIG1_CE                  (1 << 1)
148 #define NFC_CONFIG1_RST                 (1 << 2)
149 #endif
150 #define NFC_V1_V2_CONFIG1_ECC_EN        (1 << 3)
151 #define NFC_V1_V2_CONFIG1_INT_MSK       (1 << 4)
152 #define NFC_V1_V2_CONFIG1_BIG           (1 << 5)
153 #define NFC_V2_CONFIG1_ECC_MODE_4       (1 << 0)
154 #define NFC_V2_CONFIG1_ONE_CYCLE        (1 << 8)
155 #define NFC_V2_CONFIG1_FP_INT           (1 << 11)
156 #define NFC_V3_CONFIG1_RBA_MASK         (0x7 << 4)
157 #define NFC_V3_CONFIG1_RBA(x)           (((x) & 0x7) << 4)
158
159 #define NFC_V1_V2_CONFIG2_INT           (1 << 15)
160 #define NFC_V3_CONFIG2_PS_MASK          (0x3 << 0)
161 #define NFC_V3_CONFIG2_PS_512           (0 << 0)
162 #define NFC_V3_CONFIG2_PS_2048          (1 << 0)
163 #define NFC_V3_CONFIG2_PS_4096          (2 << 0)
164 #define NFC_V3_CONFIG2_ONE_CYCLE        (1 << 2)
165 #define NFC_V3_CONFIG2_ECC_EN           (1 << 3)
166 #define NFC_V3_CONFIG2_2CMD_PHASES      (1 << 4)
167 #define NFC_V3_CONFIG2_NUM_ADDR_PH0     (1 << 5)
168 #define NFC_V3_CONFIG2_ECC_MODE_8       (1 << 6)
169 #define NFC_V3_CONFIG2_PPB_MASK         (0x3 << 7)
170 #define NFC_V3_CONFIG2_PPB(x)           (((x) & 0x3) << 7)
171 #define NFC_V3_CONFIG2_EDC_MASK         (0x7 << 9)
172 #define NFC_V3_CONFIG2_EDC(x)           (((x) & 0x7) << 9)
173 #define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)  (((x) & 0x3) << 12)
174 #define NFC_V3_CONFIG2_INT_MSK          (1 << 15)
175 #define NFC_V3_CONFIG2_SPAS_MASK        (0xff << 16)
176 #define NFC_V3_CONFIG2_SPAS(x)          (((x) & 0xff) << 16)
177 #define NFC_V3_CONFIG2_ST_CMD_MASK      (0xff << 24)
178 #define NFC_V3_CONFIG2_ST_CMD(x)        (((x) & 0xff) << 24)
179
180 #define NFC_V3_CONFIG3_ADD_OP(x)        (((x) & 0x3) << 0)
181 #define NFC_V3_CONFIG3_FW8              (1 << 3)
182 #define NFC_V3_CONFIG3_SBB(x)           (((x) & 0x7) << 8)
183 #define NFC_V3_CONFIG3_NUM_OF_DEVS(x)   (((x) & 0x7) << 12)
184 #define NFC_V3_CONFIG3_RBB_MODE         (1 << 15)
185 #define NFC_V3_CONFIG3_NO_SDMA          (1 << 20)
186
187 #define NFC_V3_WRPROT_UNLOCK            (1 << 2)
188 #define NFC_V3_WRPROT_BLS_UNLOCK        (2 << 6)
189
190 #define NFC_V3_IPC_CREQ                 (1 << 0)
191 #define NFC_V3_IPC_INT                  (1 << 31)
192
193 #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
194 #define operation       config2
195 #define readnfc         readw
196 #define writenfc        writew
197 #elif defined(MXC_NFC_V3_2)
198 #define operation       launch
199 #define readnfc         readl
200 #define writenfc        writel
201 #endif
202
203 #endif /* __MXC_NAND_H */