Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
[platform/kernel/u-boot.git] / drivers / mmc / zynq_sdhci.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2013 - 2015 Xilinx, Inc.
4  *
5  * Xilinx Zynq SD Host Controller Interface
6  */
7
8 #include <clk.h>
9 #include <common.h>
10 #include <dm.h>
11 #include <fdtdec.h>
12 #include "mmc_private.h"
13 #include <linux/libfdt.h>
14 #include <malloc.h>
15 #include <sdhci.h>
16 #include <zynqmp_tap_delay.h>
17
18 DECLARE_GLOBAL_DATA_PTR;
19
20 struct arasan_sdhci_plat {
21         struct mmc_config cfg;
22         struct mmc mmc;
23         unsigned int f_max;
24 };
25
26 struct arasan_sdhci_priv {
27         struct sdhci_host *host;
28         u8 deviceid;
29         u8 bank;
30         u8 no_1p8;
31 };
32
33 #if defined(CONFIG_ARCH_ZYNQMP)
34 #define MMC_HS200_BUS_SPEED     5
35
36 static const u8 mode2timing[] = {
37         [MMC_LEGACY] = UHS_SDR12_BUS_SPEED,
38         [SD_LEGACY] = UHS_SDR12_BUS_SPEED,
39         [MMC_HS] = HIGH_SPEED_BUS_SPEED,
40         [SD_HS] = HIGH_SPEED_BUS_SPEED,
41         [MMC_HS_52] = HIGH_SPEED_BUS_SPEED,
42         [MMC_DDR_52] = HIGH_SPEED_BUS_SPEED,
43         [UHS_SDR12] = UHS_SDR12_BUS_SPEED,
44         [UHS_SDR25] = UHS_SDR25_BUS_SPEED,
45         [UHS_SDR50] = UHS_SDR50_BUS_SPEED,
46         [UHS_DDR50] = UHS_DDR50_BUS_SPEED,
47         [UHS_SDR104] = UHS_SDR104_BUS_SPEED,
48         [MMC_HS_200] = MMC_HS200_BUS_SPEED,
49 };
50
51 #define SDHCI_TUNING_LOOP_COUNT 40
52
53 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
54 {
55         u16 clk;
56         unsigned long timeout;
57
58         clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
59         clk &= ~(SDHCI_CLOCK_CARD_EN);
60         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
61
62         /* Issue DLL Reset */
63         zynqmp_dll_reset(deviceid);
64
65         /* Wait max 20 ms */
66         timeout = 100;
67         while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
68                                 & SDHCI_CLOCK_INT_STABLE)) {
69                 if (timeout == 0) {
70                         dev_err(mmc_dev(host->mmc),
71                                 ": Internal clock never stabilised.\n");
72                         return;
73                 }
74                 timeout--;
75                 udelay(1000);
76         }
77
78         clk |= SDHCI_CLOCK_CARD_EN;
79         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
80 }
81
82 static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
83 {
84         struct mmc_cmd cmd;
85         struct mmc_data data;
86         u32 ctrl;
87         struct sdhci_host *host;
88         struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
89         char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
90         u8 deviceid;
91
92         debug("%s\n", __func__);
93
94         host = priv->host;
95         deviceid = priv->deviceid;
96
97         ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
98         ctrl |= SDHCI_CTRL_EXEC_TUNING;
99         sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
100
101         mdelay(1);
102
103         arasan_zynqmp_dll_reset(host, deviceid);
104
105         sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
106         sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
107
108         do {
109                 cmd.cmdidx = opcode;
110                 cmd.resp_type = MMC_RSP_R1;
111                 cmd.cmdarg = 0;
112
113                 data.blocksize = 64;
114                 data.blocks = 1;
115                 data.flags = MMC_DATA_READ;
116
117                 if (tuning_loop_counter-- == 0)
118                         break;
119
120                 if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
121                     mmc->bus_width == 8)
122                         data.blocksize = 128;
123
124                 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
125                                                     data.blocksize),
126                              SDHCI_BLOCK_SIZE);
127                 sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
128                 sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
129
130                 mmc_send_cmd(mmc, &cmd, NULL);
131                 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
132
133                 if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
134                         udelay(1);
135
136         } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
137
138         if (tuning_loop_counter < 0) {
139                 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
140                 sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
141         }
142
143         if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
144                 printf("%s:Tuning failed\n", __func__);
145                 return -1;
146         }
147
148         udelay(1);
149         arasan_zynqmp_dll_reset(host, deviceid);
150
151         /* Enable only interrupts served by the SD controller */
152         sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
153                      SDHCI_INT_ENABLE);
154         /* Mask all sdhci interrupt sources */
155         sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
156
157         return 0;
158 }
159
160 static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
161 {
162         struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
163         struct mmc *mmc = (struct mmc *)host->mmc;
164         u8 uhsmode;
165
166         uhsmode = mode2timing[mmc->selected_mode];
167
168         if (uhsmode >= UHS_SDR25_BUS_SPEED)
169                 arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
170                                            priv->bank);
171 }
172
173 static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
174 {
175         struct mmc *mmc = (struct mmc *)host->mmc;
176         u32 reg;
177
178         if (!IS_SD(mmc))
179                 return;
180
181         if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
182                 reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
183                 reg |= SDHCI_CTRL_VDD_180;
184                 sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
185         }
186
187         if (mmc->selected_mode > SD_HS &&
188             mmc->selected_mode <= UHS_DDR50)
189                 sdhci_set_uhs_timing(host);
190 }
191 #endif
192
193 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
194 const struct sdhci_ops arasan_ops = {
195         .platform_execute_tuning        = &arasan_sdhci_execute_tuning,
196         .set_delay = &arasan_sdhci_set_tapdelay,
197         .set_control_reg = &arasan_sdhci_set_control_reg,
198 };
199 #endif
200
201 static int arasan_sdhci_probe(struct udevice *dev)
202 {
203         struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
204         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
205         struct arasan_sdhci_priv *priv = dev_get_priv(dev);
206         struct sdhci_host *host;
207         struct clk clk;
208         unsigned long clock;
209         int ret;
210
211         host = priv->host;
212
213         ret = clk_get_by_index(dev, 0, &clk);
214         if (ret < 0) {
215                 dev_err(dev, "failed to get clock\n");
216                 return ret;
217         }
218
219         clock = clk_get_rate(&clk);
220         if (IS_ERR_VALUE(clock)) {
221                 dev_err(dev, "failed to get rate\n");
222                 return clock;
223         }
224
225         debug("%s: CLK %ld\n", __func__, clock);
226
227         ret = clk_enable(&clk);
228         if (ret && ret != -ENOSYS) {
229                 dev_err(dev, "failed to enable clock\n");
230                 return ret;
231         }
232
233         host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
234                        SDHCI_QUIRK_BROKEN_R1B;
235
236 #ifdef CONFIG_ZYNQ_HISPD_BROKEN
237         host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
238 #endif
239
240         if (priv->no_1p8)
241                 host->quirks |= SDHCI_QUIRK_NO_1_8_V;
242
243         host->max_clk = clock;
244
245         ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
246                               CONFIG_ZYNQ_SDHCI_MIN_FREQ);
247         host->mmc = &plat->mmc;
248         if (ret)
249                 return ret;
250         host->mmc->priv = host;
251         host->mmc->dev = dev;
252         upriv->mmc = host->mmc;
253
254         return sdhci_probe(dev);
255 }
256
257 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
258 {
259         struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
260         struct arasan_sdhci_priv *priv = dev_get_priv(dev);
261
262         priv->host = calloc(1, sizeof(struct sdhci_host));
263         if (!priv->host)
264                 return -1;
265
266         priv->host->name = dev->name;
267
268 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
269         priv->host->ops = &arasan_ops;
270 #endif
271
272         priv->host->ioaddr = (void *)dev_read_addr(dev);
273         if (IS_ERR(priv->host->ioaddr))
274                 return PTR_ERR(priv->host->ioaddr);
275
276         priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
277         priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
278         priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
279
280         plat->f_max = dev_read_u32_default(dev, "max-frequency",
281                                            CONFIG_ZYNQ_SDHCI_MAX_FREQ);
282         return 0;
283 }
284
285 static int arasan_sdhci_bind(struct udevice *dev)
286 {
287         struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
288
289         return sdhci_bind(dev, &plat->mmc, &plat->cfg);
290 }
291
292 static const struct udevice_id arasan_sdhci_ids[] = {
293         { .compatible = "arasan,sdhci-8.9a" },
294         { }
295 };
296
297 U_BOOT_DRIVER(arasan_sdhci_drv) = {
298         .name           = "arasan_sdhci",
299         .id             = UCLASS_MMC,
300         .of_match       = arasan_sdhci_ids,
301         .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
302         .ops            = &sdhci_ops,
303         .bind           = arasan_sdhci_bind,
304         .probe          = arasan_sdhci_probe,
305         .priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
306         .platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
307 };