drivers/mmc/sunxi_mmc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2007-2011
   4  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   5  * Aaron <leafy.myeh@allwinnertech.com>
   6  *
   7  * MMC driver for allwinner sunxi platform.
   8  *
   9  * This driver is used by the (ARM) SPL with the legacy MMC interface, and
  10  * by U-Boot proper using the full DM interface. The actual hardware access
  11  * code is common, and comes first in this file.
  12  * The legacy MMC interface implementation comes next, followed by the
  13  * proper DM_MMC implementation at the end.
  14  */
  15
  16 #include <common.h>
  17 #include <dm.h>
  18 #include <errno.h>
  19 #include <log.h>
  20 #include <malloc.h>
  21 #include <mmc.h>
  22 #include <clk.h>
  23 #include <reset.h>
  24 #include <asm/gpio.h>
  25 #include <asm/io.h>
  26 #include <asm/arch/clock.h>
  27 #include <asm/arch/cpu.h>
  28 #include <asm/arch/mmc.h>
  29 #include <linux/delay.h>
  30
  31 #ifndef CCM_MMC_CTRL_MODE_SEL_NEW
  32 #define CCM_MMC_CTRL_MODE_SEL_NEW       0
  33 #endif
  34
  35 struct sunxi_mmc_plat {
  36         struct mmc_config cfg;
  37         struct mmc mmc;
  38 };
  39
  40 struct sunxi_mmc_priv {
  41         unsigned mmc_no;
  42         uint32_t *mclkreg;
  43         unsigned fatal_err;
  44         struct gpio_desc cd_gpio;       /* Change Detect GPIO */
  45         struct sunxi_mmc *reg;
  46         struct mmc_config cfg;
  47 };
  48
  49 /*
  50  * All A64 and later MMC controllers feature auto-calibration. This would
  51  * normally be detected via the compatible string, but we need something
  52  * which works in the SPL as well.
  53  */
  54 static bool sunxi_mmc_can_calibrate(void)
  55 {
  56         return IS_ENABLED(CONFIG_MACH_SUN50I) ||
  57                IS_ENABLED(CONFIG_MACH_SUN50I_H5) ||
  58                IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
  59                IS_ENABLED(CONFIG_MACH_SUN8I_R40);
  60 }
  61
  62 static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
  63 {
  64         unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
  65         bool new_mode = IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE);
  66         u32 val = 0;
  67
  68         /* A83T support new mode only on eMMC */
  69         if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T) && priv->mmc_no != 2)
  70                 new_mode = false;
  71
  72         if (hz <= 24000000) {
  73                 pll = CCM_MMC_CTRL_OSCM24;
  74                 pll_hz = 24000000;
  75         } else {
  76 #ifdef CONFIG_MACH_SUN9I
  77                 pll = CCM_MMC_CTRL_PLL_PERIPH0;
  78                 pll_hz = clock_get_pll4_periph0();
  79 #else
  80                 /*
  81                  * SoCs since the A64 (H5, H6, H616) actually use the doubled
  82                  * rate of PLL6/PERIPH0 as an input clock, but compensate for
  83                  * that with a fixed post-divider of 2 in the mod clock.
  84                  * This cancels each other out, so for simplicity we just
  85                  * pretend it's always PLL6 without a post divider here.
  86                  */
  87                 pll = CCM_MMC_CTRL_PLL6;
  88                 pll_hz = clock_get_pll6();
  89 #endif
  90         }
  91
  92         div = pll_hz / hz;
  93         if (pll_hz % hz)
  94                 div++;
  95
  96         n = 0;
  97         while (div > 16) {
  98                 n++;
  99                 div = (div + 1) / 2;
 100         }
 101
 102         if (n > 3) {
 103                 printf("mmc %u error cannot set clock to %u\n", priv->mmc_no,
 104                        hz);
 105                 return -1;
 106         }
 107
 108         /* determine delays */
 109         if (hz <= 400000) {
 110                 oclk_dly = 0;
 111                 sclk_dly = 0;
 112         } else if (hz <= 25000000) {
 113                 oclk_dly = 0;
 114                 sclk_dly = 5;
 115         } else {
 116                 if (IS_ENABLED(CONFIG_MACH_SUN9I)) {
 117                         if (hz <= 52000000)
 118                                 oclk_dly = 5;
 119                         else
 120                                 oclk_dly = 2;
 121                 } else {
 122                         if (hz <= 52000000)
 123                                 oclk_dly = 3;
 124                         else
 125                                 oclk_dly = 1;
 126                 }
 127                 sclk_dly = 4;
 128         }
 129
 130         if (new_mode) {
 131                 val |= CCM_MMC_CTRL_MODE_SEL_NEW;
 132                 setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
 133         }
 134
 135         if (!sunxi_mmc_can_calibrate()) {
 136                 /*
 137                  * Use hardcoded delay values if controller doesn't support
 138                  * calibration
 139                  */
 140                 val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
 141                         CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
 142         }
 143
 144         writel(CCM_MMC_CTRL_ENABLE| pll | CCM_MMC_CTRL_N(n) |
 145                CCM_MMC_CTRL_M(div) | val, priv->mclkreg);
 146
 147         debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
 148               priv->mmc_no, hz, pll_hz, 1u << n, div, pll_hz / (1u << n) / div);
 149
 150         return 0;
 151 }
 152
 153 static int mmc_update_clk(struct sunxi_mmc_priv *priv)
 154 {
 155         unsigned int cmd;
 156         unsigned timeout_msecs = 2000;
 157         unsigned long start = get_timer(0);
 158
 159         cmd = SUNXI_MMC_CMD_START |
 160               SUNXI_MMC_CMD_UPCLK_ONLY |
 161               SUNXI_MMC_CMD_WAIT_PRE_OVER;
 162
 163         writel(cmd, &priv->reg->cmd);
 164         while (readl(&priv->reg->cmd) & SUNXI_MMC_CMD_START) {
 165                 if (get_timer(start) > timeout_msecs)
 166                         return -1;
 167         }
 168
 169         /* clock update sets various irq status bits, clear these */
 170         writel(readl(&priv->reg->rint), &priv->reg->rint);
 171
 172         return 0;
 173 }
 174
 175 static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
 176 {
 177         unsigned rval = readl(&priv->reg->clkcr);
 178
 179         /* Disable Clock */
 180         rval &= ~SUNXI_MMC_CLK_ENABLE;
 181         writel(rval, &priv->reg->clkcr);
 182         if (mmc_update_clk(priv))
 183                 return -1;
 184
 185         /* Set mod_clk to new rate */
 186         if (mmc_set_mod_clk(priv, mmc->clock))
 187                 return -1;
 188
 189         /* Clear internal divider */
 190         rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
 191         writel(rval, &priv->reg->clkcr);
 192
 193 #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
 194         /* A64 supports calibration of delays on MMC controller and we
 195          * have to set delay of zero before starting calibration.
 196          * Allwinner BSP driver sets a delay only in the case of
 197          * using HS400 which is not supported by mainline U-Boot or
 198          * Linux at the moment
 199          */
 200         if (sunxi_mmc_can_calibrate())
 201                 writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
 202 #endif
 203
 204         /* Re-enable Clock */
 205         rval |= SUNXI_MMC_CLK_ENABLE;
 206         writel(rval, &priv->reg->clkcr);
 207         if (mmc_update_clk(priv))
 208                 return -1;
 209
 210         return 0;
 211 }
 212
 213 static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv,
 214                                     struct mmc *mmc)
 215 {
 216         debug("set ios: bus_width: %x, clock: %d\n",
 217               mmc->bus_width, mmc->clock);
 218
 219         /* Change clock first */
 220         if (mmc->clock && mmc_config_clock(priv, mmc) != 0) {
 221                 priv->fatal_err = 1;
 222                 return -EINVAL;
 223         }
 224
 225         /* Change bus width */
 226         if (mmc->bus_width == 8)
 227                 writel(0x2, &priv->reg->width);
 228         else if (mmc->bus_width == 4)
 229                 writel(0x1, &priv->reg->width);
 230         else
 231                 writel(0x0, &priv->reg->width);
 232
 233         return 0;
 234 }
 235
 236 static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 237                                  struct mmc_data *data)
 238 {
 239         const int reading = !!(data->flags & MMC_DATA_READ);
 240         const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
 241                                               SUNXI_MMC_STATUS_FIFO_FULL;
 242         unsigned i;
 243         unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
 244         unsigned word_cnt = (data->blocksize * data->blocks) >> 2;
 245         unsigned timeout_msecs = word_cnt >> 6;
 246         uint32_t status;
 247         unsigned long  start;
 248
 249         if (timeout_msecs < 2000)
 250                 timeout_msecs = 2000;
 251
 252         /* Always read / write data through the CPU */
 253         setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
 254
 255         start = get_timer(0);
 256
 257         for (i = 0; i < word_cnt;) {
 258                 unsigned int in_fifo;
 259
 260                 while ((status = readl(&priv->reg->status)) & status_bit) {
 261                         if (get_timer(start) > timeout_msecs)
 262                                 return -1;
 263                 }
 264
 265                 /*
 266                  * For writing we do not easily know the FIFO size, so have
 267                  * to check the FIFO status after every word written.
 268                  * TODO: For optimisation we could work out a minimum FIFO
 269                  * size across all SoCs, and use that together with the current
 270                  * fill level to write chunks of words.
 271                  */
 272                 if (!reading) {
 273                         writel(buff[i++], &priv->reg->fifo);
 274                         continue;
 275                 }
 276
 277                 /*
 278                  * The status register holds the current FIFO level, so we
 279                  * can be sure to collect as many words from the FIFO
 280                  * register without checking the status register after every
 281                  * read. That saves half of the costly MMIO reads, effectively
 282                  * doubling the read performance.
 283                  * Some SoCs (A20) report a level of 0 if the FIFO is
 284                  * completely full (value masked out?). Use a safe minimal
 285                  * FIFO size in this case.
 286                  */
 287                 in_fifo = SUNXI_MMC_STATUS_FIFO_LEVEL(status);
 288                 if (in_fifo == 0 && (status & SUNXI_MMC_STATUS_FIFO_FULL))
 289                         in_fifo = 32;
 290                 for (; in_fifo > 0; in_fifo--)
 291                         buff[i++] = readl_relaxed(&priv->reg->fifo);
 292                 dmb();
 293         }
 294
 295         return 0;
 296 }
 297
 298 static int mmc_rint_wait(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 299                          uint timeout_msecs, uint done_bit, const char *what)
 300 {
 301         unsigned int status;
 302         unsigned long start = get_timer(0);
 303
 304         do {
 305                 status = readl(&priv->reg->rint);
 306                 if ((get_timer(start) > timeout_msecs) ||
 307                     (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
 308                         debug("%s timeout %x\n", what,
 309                               status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
 310                         return -ETIMEDOUT;
 311                 }
 312         } while (!(status & done_bit));
 313
 314         return 0;
 315 }
 316
 317 static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
 318                                      struct mmc *mmc, struct mmc_cmd *cmd,
 319                                      struct mmc_data *data)
 320 {
 321         unsigned int cmdval = SUNXI_MMC_CMD_START;
 322         unsigned int timeout_msecs;
 323         int error = 0;
 324         unsigned int status = 0;
 325         unsigned int bytecnt = 0;
 326
 327         if (priv->fatal_err)
 328                 return -1;
 329         if (cmd->resp_type & MMC_RSP_BUSY)
 330                 debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
 331         if (cmd->cmdidx == 12)
 332                 return 0;
 333
 334         if (!cmd->cmdidx)
 335                 cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
 336         if (cmd->resp_type & MMC_RSP_PRESENT)
 337                 cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
 338         if (cmd->resp_type & MMC_RSP_136)
 339                 cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
 340         if (cmd->resp_type & MMC_RSP_CRC)
 341                 cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
 342
 343         if (data) {
 344                 if ((u32)(long)data->dest & 0x3) {
 345                         error = -1;
 346                         goto out;
 347                 }
 348
 349                 cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
 350                 if (data->flags & MMC_DATA_WRITE)
 351                         cmdval |= SUNXI_MMC_CMD_WRITE;
 352                 if (data->blocks > 1)
 353                         cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
 354                 writel(data->blocksize, &priv->reg->blksz);
 355                 writel(data->blocks * data->blocksize, &priv->reg->bytecnt);
 356         }
 357
 358         debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", priv->mmc_no,
 359               cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
 360         writel(cmd->cmdarg, &priv->reg->arg);
 361
 362         if (!data)
 363                 writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 364
 365         /*
 366          * transfer data and check status
 367          * STATREG[2] : FIFO empty
 368          * STATREG[3] : FIFO full
 369          */
 370         if (data) {
 371                 int ret = 0;
 372
 373                 bytecnt = data->blocksize * data->blocks;
 374                 debug("trans data %d bytes\n", bytecnt);
 375                 writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 376                 ret = mmc_trans_data_by_cpu(priv, mmc, data);
 377                 if (ret) {
 378                         error = readl(&priv->reg->rint) &
 379                                 SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
 380                         error = -ETIMEDOUT;
 381                         goto out;
 382                 }
 383         }
 384
 385         error = mmc_rint_wait(priv, mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE,
 386                               "cmd");
 387         if (error)
 388                 goto out;
 389
 390         if (data) {
 391                 timeout_msecs = 120;
 392                 debug("cacl timeout %x msec\n", timeout_msecs);
 393                 error = mmc_rint_wait(priv, mmc, timeout_msecs,
 394                                       data->blocks > 1 ?
 395                                       SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
 396                                       SUNXI_MMC_RINT_DATA_OVER,
 397                                       "data");
 398                 if (error)
 399                         goto out;
 400         }
 401
 402         if (cmd->resp_type & MMC_RSP_BUSY) {
 403                 unsigned long start = get_timer(0);
 404                 timeout_msecs = 2000;
 405
 406                 do {
 407                         status = readl(&priv->reg->status);
 408                         if (get_timer(start) > timeout_msecs) {
 409                                 debug("busy timeout\n");
 410                                 error = -ETIMEDOUT;
 411                                 goto out;
 412                         }
 413                 } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
 414         }
 415
 416         if (cmd->resp_type & MMC_RSP_136) {
 417                 cmd->response[0] = readl(&priv->reg->resp3);
 418                 cmd->response[1] = readl(&priv->reg->resp2);
 419                 cmd->response[2] = readl(&priv->reg->resp1);
 420                 cmd->response[3] = readl(&priv->reg->resp0);
 421                 debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
 422                       cmd->response[3], cmd->response[2],
 423                       cmd->response[1], cmd->response[0]);
 424         } else {
 425                 cmd->response[0] = readl(&priv->reg->resp0);
 426                 debug("mmc resp 0x%08x\n", cmd->response[0]);
 427         }
 428 out:
 429         if (error < 0) {
 430                 writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
 431                 mmc_update_clk(priv);
 432         }
 433         writel(0xffffffff, &priv->reg->rint);
 434         writel(readl(&priv->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
 435                &priv->reg->gctrl);
 436
 437         return error;
 438 }
 439
 440 /* non-DM code here is used by the (ARM) SPL only */
 441
 442 #if !CONFIG_IS_ENABLED(DM_MMC)
 443 /* support 4 mmc hosts */
 444 struct sunxi_mmc_priv mmc_host[4];
 445
 446 static int mmc_resource_init(int sdc_no)
 447 {
 448         struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
 449         struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 450
 451         debug("init mmc %d resource\n", sdc_no);
 452
 453         switch (sdc_no) {
 454         case 0:
 455                 priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
 456                 priv->mclkreg = &ccm->sd0_clk_cfg;
 457                 break;
 458         case 1:
 459                 priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
 460                 priv->mclkreg = &ccm->sd1_clk_cfg;
 461                 break;
 462 #ifdef SUNXI_MMC2_BASE
 463         case 2:
 464                 priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
 465                 priv->mclkreg = &ccm->sd2_clk_cfg;
 466                 break;
 467 #endif
 468 #ifdef SUNXI_MMC3_BASE
 469         case 3:
 470                 priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
 471                 priv->mclkreg = &ccm->sd3_clk_cfg;
 472                 break;
 473 #endif
 474         default:
 475                 printf("Wrong mmc number %d\n", sdc_no);
 476                 return -1;
 477         }
 478         priv->mmc_no = sdc_no;
 479
 480         return 0;
 481 }
 482
 483 static int sunxi_mmc_core_init(struct mmc *mmc)
 484 {
 485         struct sunxi_mmc_priv *priv = mmc->priv;
 486
 487         /* Reset controller */
 488         writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
 489         udelay(1000);
 490
 491         return 0;
 492 }
 493
 494 static int sunxi_mmc_set_ios_legacy(struct mmc *mmc)
 495 {
 496         struct sunxi_mmc_priv *priv = mmc->priv;
 497
 498         return sunxi_mmc_set_ios_common(priv, mmc);
 499 }
 500
 501 static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd,
 502                                      struct mmc_data *data)
 503 {
 504         struct sunxi_mmc_priv *priv = mmc->priv;
 505
 506         return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data);
 507 }
 508
 509 /* .getcd is not needed by the SPL */
 510 static const struct mmc_ops sunxi_mmc_ops = {
 511         .send_cmd       = sunxi_mmc_send_cmd_legacy,
 512         .set_ios        = sunxi_mmc_set_ios_legacy,
 513         .init           = sunxi_mmc_core_init,
 514 };
 515
 516 struct mmc *sunxi_mmc_init(int sdc_no)
 517 {
 518         struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 519         struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
 520         struct mmc_config *cfg = &priv->cfg;
 521         int ret;
 522
 523         memset(priv, '\0', sizeof(struct sunxi_mmc_priv));
 524
 525         cfg->name = "SUNXI SD/MMC";
 526         cfg->ops  = &sunxi_mmc_ops;
 527
 528         cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 529         cfg->host_caps = MMC_MODE_4BIT;
 530
 531         if ((IS_ENABLED(CONFIG_MACH_SUN50I) || IS_ENABLED(CONFIG_MACH_SUN8I) ||
 532             IS_ENABLED(CONFIG_SUN50I_GEN_H6)) && (sdc_no == 2))
 533                 cfg->host_caps = MMC_MODE_8BIT;
 534
 535         cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 536         cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 537
 538         cfg->f_min = 400000;
 539         cfg->f_max = 52000000;
 540
 541         if (mmc_resource_init(sdc_no) != 0)
 542                 return NULL;
 543
 544         /* config ahb clock */
 545         debug("init mmc %d clock and io\n", sdc_no);
 546 #if !defined(CONFIG_SUN50I_GEN_H6)
 547         setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
 548
 549 #ifdef CONFIG_SUNXI_GEN_SUN6I
 550         /* unassert reset */
 551         setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
 552 #endif
 553 #if defined(CONFIG_MACH_SUN9I)
 554         /* sun9i has a mmc-common module, also set the gate and reset there */
 555         writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
 556                SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
 557 #endif
 558 #else /* CONFIG_SUN50I_GEN_H6 */
 559         setbits_le32(&ccm->sd_gate_reset, 1 << sdc_no);
 560         /* unassert reset */
 561         setbits_le32(&ccm->sd_gate_reset, 1 << (RESET_SHIFT + sdc_no));
 562 #endif
 563         ret = mmc_set_mod_clk(priv, 24000000);
 564         if (ret)
 565                 return NULL;
 566
 567         return mmc_create(cfg, priv);
 568 }
 569
 570 #else /* CONFIG_DM_MMC code below, as used by U-Boot proper */
 571
 572 static int sunxi_mmc_set_ios(struct udevice *dev)
 573 {
 574         struct sunxi_mmc_plat *plat = dev_get_plat(dev);
 575         struct sunxi_mmc_priv *priv = dev_get_priv(dev);
 576
 577         return sunxi_mmc_set_ios_common(priv, &plat->mmc);
 578 }
 579
 580 static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 581                               struct mmc_data *data)
 582 {
 583         struct sunxi_mmc_plat *plat = dev_get_plat(dev);
 584         struct sunxi_mmc_priv *priv = dev_get_priv(dev);
 585
 586         return sunxi_mmc_send_cmd_common(priv, &plat->mmc, cmd, data);
 587 }
 588
 589 static int sunxi_mmc_getcd(struct udevice *dev)
 590 {
 591         struct mmc *mmc = mmc_get_mmc_dev(dev);
 592         struct sunxi_mmc_priv *priv = dev_get_priv(dev);
 593
 594         /* If polling, assume that the card is always present. */
 595         if ((mmc->cfg->host_caps & MMC_CAP_NONREMOVABLE) ||
 596             (mmc->cfg->host_caps & MMC_CAP_NEEDS_POLL))
 597                 return 1;
 598
 599         if (dm_gpio_is_valid(&priv->cd_gpio)) {
 600                 int cd_state = dm_gpio_get_value(&priv->cd_gpio);
 601
 602                 if (mmc->cfg->host_caps & MMC_CAP_CD_ACTIVE_HIGH)
 603                         return !cd_state;
 604                 else
 605                         return cd_state;
 606         }
 607         return 1;
 608 }
 609
 610 static const struct dm_mmc_ops sunxi_mmc_ops = {
 611         .send_cmd       = sunxi_mmc_send_cmd,
 612         .set_ios        = sunxi_mmc_set_ios,
 613         .get_cd         = sunxi_mmc_getcd,
 614 };
 615
 616 static unsigned get_mclk_offset(void)
 617 {
 618         if (IS_ENABLED(CONFIG_MACH_SUN9I_A80))
 619                 return 0x410;
 620
 621         if (IS_ENABLED(CONFIG_SUN50I_GEN_H6))
 622                 return 0x830;
 623
 624         return 0x88;
 625 };
 626
 627 static int sunxi_mmc_probe(struct udevice *dev)
 628 {
 629         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 630         struct sunxi_mmc_plat *plat = dev_get_plat(dev);
 631         struct sunxi_mmc_priv *priv = dev_get_priv(dev);
 632         struct reset_ctl_bulk reset_bulk;
 633         struct clk gate_clk;
 634         struct mmc_config *cfg = &plat->cfg;
 635         struct ofnode_phandle_args args;
 636         u32 *ccu_reg;
 637         int ret;
 638
 639         cfg->name = dev->name;
 640
 641         cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 642         cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS;
 643         cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 644
 645         cfg->f_min = 400000;
 646         cfg->f_max = 52000000;
 647
 648         ret = mmc_of_parse(dev, cfg);
 649         if (ret)
 650                 return ret;
 651
 652         priv->reg = dev_read_addr_ptr(dev);
 653
 654         /* We don't have a sunxi clock driver so find the clock address here */
 655         ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
 656                                           1, &args);
 657         if (ret)
 658                 return ret;
 659         ccu_reg = (u32 *)(uintptr_t)ofnode_get_addr(args.node);
 660
 661         priv->mmc_no = ((uintptr_t)priv->reg - SUNXI_MMC0_BASE) / 0x1000;
 662         priv->mclkreg = (void *)ccu_reg + get_mclk_offset() + priv->mmc_no * 4;
 663
 664         ret = clk_get_by_name(dev, "ahb", &gate_clk);
 665         if (!ret)
 666                 clk_enable(&gate_clk);
 667
 668         ret = reset_get_bulk(dev, &reset_bulk);
 669         if (!ret)
 670                 reset_deassert_bulk(&reset_bulk);
 671
 672         ret = mmc_set_mod_clk(priv, 24000000);
 673         if (ret)
 674                 return ret;
 675
 676         /* This GPIO is optional */
 677         gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
 678                              GPIOD_IS_IN | GPIOD_PULL_UP);
 679
 680         upriv->mmc = &plat->mmc;
 681
 682         /* Reset controller */
 683         writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
 684         udelay(1000);
 685
 686         return 0;
 687 }
 688
 689 static int sunxi_mmc_bind(struct udevice *dev)
 690 {
 691         struct sunxi_mmc_plat *plat = dev_get_plat(dev);
 692
 693         return mmc_bind(dev, &plat->mmc, &plat->cfg);
 694 }
 695
 696 static const struct udevice_id sunxi_mmc_ids[] = {
 697         { .compatible = "allwinner,sun4i-a10-mmc" },
 698         { .compatible = "allwinner,sun5i-a13-mmc" },
 699         { .compatible = "allwinner,sun7i-a20-mmc" },
 700         { .compatible = "allwinner,sun8i-a83t-emmc" },
 701         { .compatible = "allwinner,sun9i-a80-mmc" },
 702         { .compatible = "allwinner,sun50i-a64-mmc" },
 703         { .compatible = "allwinner,sun50i-a64-emmc" },
 704         { .compatible = "allwinner,sun50i-h6-mmc" },
 705         { .compatible = "allwinner,sun50i-h6-emmc" },
 706         { .compatible = "allwinner,sun50i-a100-mmc" },
 707         { .compatible = "allwinner,sun50i-a100-emmc" },
 708         { /* sentinel */ }
 709 };
 710
 711 U_BOOT_DRIVER(sunxi_mmc_drv) = {
 712         .name           = "sunxi_mmc",
 713         .id             = UCLASS_MMC,
 714         .of_match       = sunxi_mmc_ids,
 715         .bind           = sunxi_mmc_bind,
 716         .probe          = sunxi_mmc_probe,
 717         .ops            = &sunxi_mmc_ops,
 718         .plat_auto      = sizeof(struct sunxi_mmc_plat),
 719         .priv_auto      = sizeof(struct sunxi_mmc_priv),
 720 };
 721 #endif