5cb97eb02af85a1ef806dcc8e848a42c02a07d81
[platform/kernel/u-boot.git] / drivers / mmc / omap_hsmmc.c
1 /*
2  * (C) Copyright 2008
3  * Texas Instruments, <www.ti.com>
4  * Sukumar Ghorai <s-ghorai@ti.com>
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation's version 2 of
12  * the License.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24
25 #include <config.h>
26 #include <common.h>
27 #include <malloc.h>
28 #include <memalign.h>
29 #include <mmc.h>
30 #include <part.h>
31 #include <i2c.h>
32 #if defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)
33 #include <palmas.h>
34 #endif
35 #include <asm/io.h>
36 #include <asm/arch/mmc_host_def.h>
37 #ifdef CONFIG_OMAP54XX
38 #include <asm/arch/mux_dra7xx.h>
39 #include <asm/arch/dra7xx_iodelay.h>
40 #endif
41 #if !defined(CONFIG_SOC_KEYSTONE)
42 #include <asm/gpio.h>
43 #include <asm/arch/sys_proto.h>
44 #endif
45 #ifdef CONFIG_MMC_OMAP36XX_PINS
46 #include <asm/arch/mux.h>
47 #endif
48 #include <dm.h>
49 #include <power/regulator.h>
50
51 DECLARE_GLOBAL_DATA_PTR;
52
53 /* simplify defines to OMAP_HSMMC_USE_GPIO */
54 #if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \
55         (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT))
56 #define OMAP_HSMMC_USE_GPIO
57 #else
58 #undef OMAP_HSMMC_USE_GPIO
59 #endif
60
61 /* common definitions for all OMAPs */
62 #define SYSCTL_SRC      (1 << 25)
63 #define SYSCTL_SRD      (1 << 26)
64
65 #ifdef CONFIG_IODELAY_RECALIBRATION
66 struct omap_hsmmc_pinctrl_state {
67         struct pad_conf_entry *padconf;
68         int npads;
69         struct iodelay_cfg_entry *iodelay;
70         int niodelays;
71 };
72 #endif
73
74 struct omap_hsmmc_data {
75         struct hsmmc *base_addr;
76 #if !CONFIG_IS_ENABLED(DM_MMC)
77         struct mmc_config cfg;
78 #endif
79         uint bus_width;
80         uint clock;
81         ushort last_cmd;
82 #ifdef OMAP_HSMMC_USE_GPIO
83 #if CONFIG_IS_ENABLED(DM_MMC)
84         struct gpio_desc cd_gpio;       /* Change Detect GPIO */
85         struct gpio_desc wp_gpio;       /* Write Protect GPIO */
86 #else
87         int cd_gpio;
88         int wp_gpio;
89 #endif
90 #endif
91 #if CONFIG_IS_ENABLED(DM_MMC)
92         enum bus_mode mode;
93 #endif
94         u8 controller_flags;
95 #ifdef CONFIG_MMC_OMAP_HS_ADMA
96         struct omap_hsmmc_adma_desc *adma_desc_table;
97         uint desc_slot;
98 #endif
99         const char *hw_rev;
100         struct udevice *pbias_supply;
101         uint signal_voltage;
102 #ifdef CONFIG_IODELAY_RECALIBRATION
103         struct omap_hsmmc_pinctrl_state *default_pinctrl_state;
104         struct omap_hsmmc_pinctrl_state *hs_pinctrl_state;
105         struct omap_hsmmc_pinctrl_state *hs200_1_8v_pinctrl_state;
106         struct omap_hsmmc_pinctrl_state *ddr_1_8v_pinctrl_state;
107         struct omap_hsmmc_pinctrl_state *sdr12_pinctrl_state;
108         struct omap_hsmmc_pinctrl_state *sdr25_pinctrl_state;
109         struct omap_hsmmc_pinctrl_state *ddr50_pinctrl_state;
110         struct omap_hsmmc_pinctrl_state *sdr50_pinctrl_state;
111         struct omap_hsmmc_pinctrl_state *sdr104_pinctrl_state;
112 #endif
113 };
114
115 struct omap_mmc_of_data {
116         u8 controller_flags;
117 };
118
119 #ifdef CONFIG_MMC_OMAP_HS_ADMA
120 struct omap_hsmmc_adma_desc {
121         u8 attr;
122         u8 reserved;
123         u16 len;
124         u32 addr;
125 };
126
127 #define ADMA_MAX_LEN    63488
128
129 /* Decriptor table defines */
130 #define ADMA_DESC_ATTR_VALID            BIT(0)
131 #define ADMA_DESC_ATTR_END              BIT(1)
132 #define ADMA_DESC_ATTR_INT              BIT(2)
133 #define ADMA_DESC_ATTR_ACT1             BIT(4)
134 #define ADMA_DESC_ATTR_ACT2             BIT(5)
135
136 #define ADMA_DESC_TRANSFER_DATA         ADMA_DESC_ATTR_ACT2
137 #define ADMA_DESC_LINK_DESC     (ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2)
138 #endif
139
140 /* If we fail after 1 second wait, something is really bad */
141 #define MAX_RETRY_MS    1000
142 #define MMC_TIMEOUT_MS  20
143
144 /* DMA transfers can take a long time if a lot a data is transferred.
145  * The timeout must take in account the amount of data. Let's assume
146  * that the time will never exceed 333 ms per MB (in other word we assume
147  * that the bandwidth is always above 3MB/s).
148  */
149 #define DMA_TIMEOUT_PER_MB      333
150 #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT           BIT(0)
151 #define OMAP_HSMMC_NO_1_8_V                     BIT(1)
152 #define OMAP_HSMMC_USE_ADMA                     BIT(2)
153 #define OMAP_HSMMC_REQUIRE_IODELAY              BIT(3)
154
155 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size);
156 static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
157                         unsigned int siz);
158 static void omap_hsmmc_start_clock(struct hsmmc *mmc_base);
159 static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base);
160 static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit);
161
162 static inline struct omap_hsmmc_data *omap_hsmmc_get_data(struct mmc *mmc)
163 {
164 #if CONFIG_IS_ENABLED(DM_MMC)
165         return dev_get_priv(mmc->dev);
166 #else
167         return (struct omap_hsmmc_data *)mmc->priv;
168 #endif
169 }
170 static inline struct mmc_config *omap_hsmmc_get_cfg(struct mmc *mmc)
171 {
172 #if CONFIG_IS_ENABLED(DM_MMC)
173         struct omap_hsmmc_plat *plat = dev_get_platdata(mmc->dev);
174         return &plat->cfg;
175 #else
176         return &((struct omap_hsmmc_data *)mmc->priv)->cfg;
177 #endif
178 }
179
180 #if defined(OMAP_HSMMC_USE_GPIO) && !CONFIG_IS_ENABLED(DM_MMC)
181 static int omap_mmc_setup_gpio_in(int gpio, const char *label)
182 {
183         int ret;
184
185 #ifndef CONFIG_DM_GPIO
186         if (!gpio_is_valid(gpio))
187                 return -1;
188 #endif
189         ret = gpio_request(gpio, label);
190         if (ret)
191                 return ret;
192
193         ret = gpio_direction_input(gpio);
194         if (ret)
195                 return ret;
196
197         return gpio;
198 }
199 #endif
200
201 static unsigned char mmc_board_init(struct mmc *mmc)
202 {
203 #if defined(CONFIG_OMAP34XX)
204         struct mmc_config *cfg = omap_hsmmc_get_cfg(mmc);
205         t2_t *t2_base = (t2_t *)T2_BASE;
206         struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
207         u32 pbias_lite;
208 #ifdef CONFIG_MMC_OMAP36XX_PINS
209         u32 wkup_ctrl = readl(OMAP34XX_CTRL_WKUP_CTRL);
210 #endif
211
212         pbias_lite = readl(&t2_base->pbias_lite);
213         pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0);
214 #ifdef CONFIG_TARGET_OMAP3_CAIRO
215         /* for cairo board, we need to set up 1.8 Volt bias level on MMC1 */
216         pbias_lite &= ~PBIASLITEVMODE0;
217 #endif
218 #ifdef CONFIG_TARGET_OMAP3_LOGIC
219         /* For Logic PD board, 1.8V bias to go enable gpio127 for mmc_cd */
220         pbias_lite &= ~PBIASLITEVMODE1;
221 #endif
222 #ifdef CONFIG_MMC_OMAP36XX_PINS
223         if (get_cpu_family() == CPU_OMAP36XX) {
224                 /* Disable extended drain IO before changing PBIAS */
225                 wkup_ctrl &= ~OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ;
226                 writel(wkup_ctrl, OMAP34XX_CTRL_WKUP_CTRL);
227         }
228 #endif
229         writel(pbias_lite, &t2_base->pbias_lite);
230
231         writel(pbias_lite | PBIASLITEPWRDNZ1 |
232                 PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
233                 &t2_base->pbias_lite);
234
235 #ifdef CONFIG_MMC_OMAP36XX_PINS
236         if (get_cpu_family() == CPU_OMAP36XX)
237                 /* Enable extended drain IO after changing PBIAS */
238                 writel(wkup_ctrl |
239                                 OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
240                                 OMAP34XX_CTRL_WKUP_CTRL);
241 #endif
242         writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
243                 &t2_base->devconf0);
244
245         writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
246                 &t2_base->devconf1);
247
248         /* Change from default of 52MHz to 26MHz if necessary */
249         if (!(cfg->host_caps & MMC_MODE_HS_52MHz))
250                 writel(readl(&t2_base->ctl_prog_io1) & ~CTLPROGIO1SPEEDCTRL,
251                         &t2_base->ctl_prog_io1);
252
253         writel(readl(&prcm_base->fclken1_core) |
254                 EN_MMC1 | EN_MMC2 | EN_MMC3,
255                 &prcm_base->fclken1_core);
256
257         writel(readl(&prcm_base->iclken1_core) |
258                 EN_MMC1 | EN_MMC2 | EN_MMC3,
259                 &prcm_base->iclken1_core);
260 #endif
261
262 #if (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) &&\
263         !CONFIG_IS_ENABLED(DM_REGULATOR)
264         /* PBIAS config needed for MMC1 only */
265         if (mmc_get_blk_desc(mmc)->devnum == 0)
266                 vmmc_pbias_config(LDO_VOLT_3V0);
267 #endif
268
269         return 0;
270 }
271
272 void mmc_init_stream(struct hsmmc *mmc_base)
273 {
274         ulong start;
275
276         writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
277
278         writel(MMC_CMD0, &mmc_base->cmd);
279         start = get_timer(0);
280         while (!(readl(&mmc_base->stat) & CC_MASK)) {
281                 if (get_timer(0) - start > MAX_RETRY_MS) {
282                         printf("%s: timedout waiting for cc!\n", __func__);
283                         return;
284                 }
285         }
286         writel(CC_MASK, &mmc_base->stat)
287                 ;
288         writel(MMC_CMD0, &mmc_base->cmd)
289                 ;
290         start = get_timer(0);
291         while (!(readl(&mmc_base->stat) & CC_MASK)) {
292                 if (get_timer(0) - start > MAX_RETRY_MS) {
293                         printf("%s: timedout waiting for cc2!\n", __func__);
294                         return;
295                 }
296         }
297         writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
298 }
299
300 #if CONFIG_IS_ENABLED(DM_MMC)
301 #ifdef CONFIG_IODELAY_RECALIBRATION
302 static void omap_hsmmc_io_recalibrate(struct mmc *mmc)
303 {
304         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
305         struct omap_hsmmc_pinctrl_state *pinctrl_state;
306
307         switch (priv->mode) {
308         case MMC_HS_200:
309                 pinctrl_state = priv->hs200_1_8v_pinctrl_state;
310                 break;
311         case UHS_SDR104:
312                 pinctrl_state = priv->sdr104_pinctrl_state;
313                 break;
314         case UHS_SDR50:
315                 pinctrl_state = priv->sdr50_pinctrl_state;
316                 break;
317         case UHS_DDR50:
318                 pinctrl_state = priv->ddr50_pinctrl_state;
319                 break;
320         case UHS_SDR25:
321                 pinctrl_state = priv->sdr25_pinctrl_state;
322                 break;
323         case UHS_SDR12:
324                 pinctrl_state = priv->sdr12_pinctrl_state;
325                 break;
326         case SD_HS:
327         case MMC_HS:
328         case MMC_HS_52:
329                 pinctrl_state = priv->hs_pinctrl_state;
330                 break;
331         case MMC_DDR_52:
332                 pinctrl_state = priv->ddr_1_8v_pinctrl_state;
333         default:
334                 pinctrl_state = priv->default_pinctrl_state;
335                 break;
336         }
337
338         if (!pinctrl_state)
339                 pinctrl_state = priv->default_pinctrl_state;
340
341         if (priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY) {
342                 if (pinctrl_state->iodelay)
343                         late_recalibrate_iodelay(pinctrl_state->padconf,
344                                                  pinctrl_state->npads,
345                                                  pinctrl_state->iodelay,
346                                                  pinctrl_state->niodelays);
347                 else
348                         do_set_mux32((*ctrl)->control_padconf_core_base,
349                                      pinctrl_state->padconf,
350                                      pinctrl_state->npads);
351         }
352 }
353 #endif
354 static void omap_hsmmc_set_timing(struct mmc *mmc)
355 {
356         u32 val;
357         struct hsmmc *mmc_base;
358         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
359
360         mmc_base = priv->base_addr;
361
362         omap_hsmmc_stop_clock(mmc_base);
363         val = readl(&mmc_base->ac12);
364         val &= ~AC12_UHSMC_MASK;
365         priv->mode = mmc->selected_mode;
366
367         if (mmc_is_mode_ddr(priv->mode))
368                 writel(readl(&mmc_base->con) | DDR, &mmc_base->con);
369         else
370                 writel(readl(&mmc_base->con) & ~DDR, &mmc_base->con);
371
372         switch (priv->mode) {
373         case MMC_HS_200:
374         case UHS_SDR104:
375                 val |= AC12_UHSMC_SDR104;
376                 break;
377         case UHS_SDR50:
378                 val |= AC12_UHSMC_SDR50;
379                 break;
380         case MMC_DDR_52:
381         case UHS_DDR50:
382                 val |= AC12_UHSMC_DDR50;
383                 break;
384         case SD_HS:
385         case MMC_HS_52:
386         case UHS_SDR25:
387                 val |= AC12_UHSMC_SDR25;
388                 break;
389         case MMC_LEGACY:
390         case MMC_HS:
391         case SD_LEGACY:
392         case UHS_SDR12:
393                 val |= AC12_UHSMC_SDR12;
394                 break;
395         default:
396                 val |= AC12_UHSMC_RES;
397                 break;
398         }
399         writel(val, &mmc_base->ac12);
400
401 #ifdef CONFIG_IODELAY_RECALIBRATION
402         omap_hsmmc_io_recalibrate(mmc);
403 #endif
404         omap_hsmmc_start_clock(mmc_base);
405 }
406
407 static void omap_hsmmc_conf_bus_power(struct mmc *mmc, uint signal_voltage)
408 {
409         struct hsmmc *mmc_base;
410         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
411         u32 hctl, ac12;
412
413         mmc_base = priv->base_addr;
414
415         hctl = readl(&mmc_base->hctl) & ~SDVS_MASK;
416         ac12 = readl(&mmc_base->ac12) & ~AC12_V1V8_SIGEN;
417
418         switch (signal_voltage) {
419         case MMC_SIGNAL_VOLTAGE_330:
420                 hctl |= SDVS_3V0;
421                 break;
422         case MMC_SIGNAL_VOLTAGE_180:
423                 hctl |= SDVS_1V8;
424                 ac12 |= AC12_V1V8_SIGEN;
425                 break;
426         }
427
428         writel(hctl, &mmc_base->hctl);
429         writel(ac12, &mmc_base->ac12);
430 }
431
432 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
433 static int omap_hsmmc_wait_dat0(struct udevice *dev, int state, int timeout)
434 {
435         int ret = -ETIMEDOUT;
436         u32 con;
437         bool dat0_high;
438         bool target_dat0_high = !!state;
439         struct omap_hsmmc_data *priv = dev_get_priv(dev);
440         struct hsmmc *mmc_base = priv->base_addr;
441
442         con = readl(&mmc_base->con);
443         writel(con | CON_CLKEXTFREE | CON_PADEN, &mmc_base->con);
444
445         timeout = DIV_ROUND_UP(timeout, 10); /* check every 10 us. */
446         while (timeout--)       {
447                 dat0_high = !!(readl(&mmc_base->pstate) & PSTATE_DLEV_DAT0);
448                 if (dat0_high == target_dat0_high) {
449                         ret = 0;
450                         break;
451                 }
452                 udelay(10);
453         }
454         writel(con, &mmc_base->con);
455
456         return ret;
457 }
458 #endif
459
460 #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
461 #if CONFIG_IS_ENABLED(DM_REGULATOR)
462 static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV)
463 {
464         int ret = 0;
465         int uV = mV * 1000;
466
467         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
468
469         if (!mmc->vqmmc_supply)
470                 return 0;
471
472         /* Disable PBIAS */
473         ret = regulator_set_enable(priv->pbias_supply, false);
474         if (ret && ret != -ENOSYS)
475                 return ret;
476
477         /* Turn off IO voltage */
478         ret = regulator_set_enable(mmc->vqmmc_supply, false);
479         if (ret && ret != -ENOSYS)
480                 return ret;
481         /* Program a new IO voltage value */
482         ret = regulator_set_value(mmc->vqmmc_supply, uV);
483         if (ret)
484                 return ret;
485         /* Turn on IO voltage */
486         ret = regulator_set_enable(mmc->vqmmc_supply, true);
487         if (ret && ret != -ENOSYS)
488                 return ret;
489
490         /* Program PBIAS voltage*/
491         ret = regulator_set_value(priv->pbias_supply, uV);
492         if (ret && ret != -ENOSYS)
493                 return ret;
494         /* Enable PBIAS */
495         ret = regulator_set_enable(priv->pbias_supply, true);
496         if (ret && ret != -ENOSYS)
497                 return ret;
498
499         return 0;
500 }
501 #endif
502
503 static int omap_hsmmc_set_signal_voltage(struct mmc *mmc)
504 {
505         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
506         struct hsmmc *mmc_base = priv->base_addr;
507         int mv = mmc_voltage_to_mv(mmc->signal_voltage);
508         u32 capa_mask;
509         __maybe_unused u8 palmas_ldo_volt;
510         u32 val;
511
512         if (mv < 0)
513                 return -EINVAL;
514
515         if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
516                 /* Use 3.0V rather than 3.3V */
517                 mv = 3000;
518                 capa_mask = VS30_3V0SUP;
519                 palmas_ldo_volt = LDO_VOLT_3V0;
520         } else if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
521                 capa_mask = VS18_1V8SUP;
522                 palmas_ldo_volt = LDO_VOLT_1V8;
523         } else {
524                 return -EOPNOTSUPP;
525         }
526
527         val = readl(&mmc_base->capa);
528         if (!(val & capa_mask))
529                 return -EOPNOTSUPP;
530
531         priv->signal_voltage = mmc->signal_voltage;
532
533         omap_hsmmc_conf_bus_power(mmc, mmc->signal_voltage);
534
535 #if CONFIG_IS_ENABLED(DM_REGULATOR)
536         return omap_hsmmc_set_io_regulator(mmc, mv);
537 #elif (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) && \
538         defined(CONFIG_PALMAS_POWER)
539         if (mmc_get_blk_desc(mmc)->devnum == 0)
540                 vmmc_pbias_config(palmas_ldo_volt);
541         return 0;
542 #else
543         return 0;
544 #endif
545 }
546 #endif
547
548 static uint32_t omap_hsmmc_set_capabilities(struct mmc *mmc)
549 {
550         struct hsmmc *mmc_base;
551         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
552         u32 val;
553
554         mmc_base = priv->base_addr;
555         val = readl(&mmc_base->capa);
556
557         if (priv->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
558                 val |= (VS30_3V0SUP | VS18_1V8SUP);
559         } else if (priv->controller_flags & OMAP_HSMMC_NO_1_8_V) {
560                 val |= VS30_3V0SUP;
561                 val &= ~VS18_1V8SUP;
562         } else {
563                 val |= VS18_1V8SUP;
564                 val &= ~VS30_3V0SUP;
565         }
566
567         writel(val, &mmc_base->capa);
568
569         return val;
570 }
571
572 #ifdef MMC_SUPPORTS_TUNING
573 static void omap_hsmmc_disable_tuning(struct mmc *mmc)
574 {
575         struct hsmmc *mmc_base;
576         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
577         u32 val;
578
579         mmc_base = priv->base_addr;
580         val = readl(&mmc_base->ac12);
581         val &= ~(AC12_SCLK_SEL);
582         writel(val, &mmc_base->ac12);
583
584         val = readl(&mmc_base->dll);
585         val &= ~(DLL_FORCE_VALUE | DLL_SWT);
586         writel(val, &mmc_base->dll);
587 }
588
589 static void omap_hsmmc_set_dll(struct mmc *mmc, int count)
590 {
591         int i;
592         struct hsmmc *mmc_base;
593         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
594         u32 val;
595
596         mmc_base = priv->base_addr;
597         val = readl(&mmc_base->dll);
598         val |= DLL_FORCE_VALUE;
599         val &= ~(DLL_FORCE_SR_C_MASK << DLL_FORCE_SR_C_SHIFT);
600         val |= (count << DLL_FORCE_SR_C_SHIFT);
601         writel(val, &mmc_base->dll);
602
603         val |= DLL_CALIB;
604         writel(val, &mmc_base->dll);
605         for (i = 0; i < 1000; i++) {
606                 if (readl(&mmc_base->dll) & DLL_CALIB)
607                         break;
608         }
609         val &= ~DLL_CALIB;
610         writel(val, &mmc_base->dll);
611 }
612
613 static int omap_hsmmc_execute_tuning(struct udevice *dev, uint opcode)
614 {
615         struct omap_hsmmc_data *priv = dev_get_priv(dev);
616         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
617         struct mmc *mmc = upriv->mmc;
618         struct hsmmc *mmc_base;
619         u32 val;
620         u8 cur_match, prev_match = 0;
621         int ret;
622         u32 phase_delay = 0;
623         u32 start_window = 0, max_window = 0;
624         u32 length = 0, max_len = 0;
625
626         mmc_base = priv->base_addr;
627         val = readl(&mmc_base->capa2);
628
629         /* clock tuning is not needed for upto 52MHz */
630         if (!((mmc->selected_mode == MMC_HS_200) ||
631               (mmc->selected_mode == UHS_SDR104) ||
632               ((mmc->selected_mode == UHS_SDR50) && (val & CAPA2_TSDR50))))
633                 return 0;
634
635         val = readl(&mmc_base->dll);
636         val |= DLL_SWT;
637         writel(val, &mmc_base->dll);
638         while (phase_delay <= MAX_PHASE_DELAY) {
639                 omap_hsmmc_set_dll(mmc, phase_delay);
640
641                 cur_match = !mmc_send_tuning(mmc, opcode, NULL);
642
643                 if (cur_match) {
644                         if (prev_match) {
645                                 length++;
646                         } else {
647                                 start_window = phase_delay;
648                                 length = 1;
649                         }
650                 }
651
652                 if (length > max_len) {
653                         max_window = start_window;
654                         max_len = length;
655                 }
656
657                 prev_match = cur_match;
658                 phase_delay += 4;
659         }
660
661         if (!max_len) {
662                 ret = -EIO;
663                 goto tuning_error;
664         }
665
666         val = readl(&mmc_base->ac12);
667         if (!(val & AC12_SCLK_SEL)) {
668                 ret = -EIO;
669                 goto tuning_error;
670         }
671
672         phase_delay = max_window + 4 * ((3 * max_len) >> 2);
673         omap_hsmmc_set_dll(mmc, phase_delay);
674
675         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
676         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC);
677
678         return 0;
679
680 tuning_error:
681
682         omap_hsmmc_disable_tuning(mmc);
683         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
684         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC);
685
686         return ret;
687 }
688 #endif
689
690 static void omap_hsmmc_send_init_stream(struct udevice *dev)
691 {
692         struct omap_hsmmc_data *priv = dev_get_priv(dev);
693         struct hsmmc *mmc_base = priv->base_addr;
694
695         mmc_init_stream(mmc_base);
696 }
697 #endif
698
699 static void mmc_enable_irq(struct mmc *mmc, struct mmc_cmd *cmd)
700 {
701         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
702         struct hsmmc *mmc_base = priv->base_addr;
703         u32 irq_mask = INT_EN_MASK;
704
705         /*
706          * TODO: Errata i802 indicates only DCRC interrupts can occur during
707          * tuning procedure and DCRC should be disabled. But see occurences
708          * of DEB, CIE, CEB, CCRC interupts during tuning procedure. These
709          * interrupts occur along with BRR, so the data is actually in the
710          * buffer. It has to be debugged why these interrutps occur
711          */
712         if (cmd && mmc_is_tuning_cmd(cmd->cmdidx))
713                 irq_mask &= ~(IE_DEB | IE_DCRC | IE_CIE | IE_CEB | IE_CCRC);
714
715         writel(irq_mask, &mmc_base->ie);
716 }
717
718 static int omap_hsmmc_init_setup(struct mmc *mmc)
719 {
720         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
721         struct hsmmc *mmc_base;
722         unsigned int reg_val;
723         unsigned int dsor;
724         ulong start;
725
726         mmc_base = priv->base_addr;
727         mmc_board_init(mmc);
728
729         writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
730                 &mmc_base->sysconfig);
731         start = get_timer(0);
732         while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0) {
733                 if (get_timer(0) - start > MAX_RETRY_MS) {
734                         printf("%s: timedout waiting for cc2!\n", __func__);
735                         return -ETIMEDOUT;
736                 }
737         }
738         writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl);
739         start = get_timer(0);
740         while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0) {
741                 if (get_timer(0) - start > MAX_RETRY_MS) {
742                         printf("%s: timedout waiting for softresetall!\n",
743                                 __func__);
744                         return -ETIMEDOUT;
745                 }
746         }
747 #ifdef CONFIG_MMC_OMAP_HS_ADMA
748         reg_val = readl(&mmc_base->hl_hwinfo);
749         if (reg_val & MADMA_EN)
750                 priv->controller_flags |= OMAP_HSMMC_USE_ADMA;
751 #endif
752
753 #if CONFIG_IS_ENABLED(DM_MMC)
754         reg_val = omap_hsmmc_set_capabilities(mmc);
755         omap_hsmmc_conf_bus_power(mmc, (reg_val & VS30_3V0SUP) ?
756                           MMC_SIGNAL_VOLTAGE_330 : MMC_SIGNAL_VOLTAGE_180);
757 #else
758         writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl);
759         writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP,
760                 &mmc_base->capa);
761 #endif
762
763         reg_val = readl(&mmc_base->con) & RESERVED_MASK;
764
765         writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH |
766                 MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK |
767                 HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con);
768
769         dsor = 240;
770         mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
771                 (ICE_STOP | DTO_15THDTO));
772         mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
773                 (dsor << CLKD_OFFSET) | ICE_OSCILLATE);
774         start = get_timer(0);
775         while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
776                 if (get_timer(0) - start > MAX_RETRY_MS) {
777                         printf("%s: timedout waiting for ics!\n", __func__);
778                         return -ETIMEDOUT;
779                 }
780         }
781         writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
782
783         writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl);
784
785         mmc_enable_irq(mmc, NULL);
786
787 #if !CONFIG_IS_ENABLED(DM_MMC)
788         mmc_init_stream(mmc_base);
789 #endif
790
791         return 0;
792 }
793
794 /*
795  * MMC controller internal finite state machine reset
796  *
797  * Used to reset command or data internal state machines, using respectively
798  * SRC or SRD bit of SYSCTL register
799  */
800 static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit)
801 {
802         ulong start;
803
804         mmc_reg_out(&mmc_base->sysctl, bit, bit);
805
806         /*
807          * CMD(DAT) lines reset procedures are slightly different
808          * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx).
809          * According to OMAP3 TRM:
810          * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it
811          * returns to 0x0.
812          * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset
813          * procedure steps must be as follows:
814          * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in
815          *    MMCHS_SYSCTL register (SD_SYSCTL for AM335x).
816          * 2. Poll the SRC(SRD) bit until it is set to 0x1.
817          * 3. Wait until the SRC (SRD) bit returns to 0x0
818          *    (reset procedure is completed).
819          */
820 #if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
821         defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
822         if (!(readl(&mmc_base->sysctl) & bit)) {
823                 start = get_timer(0);
824                 while (!(readl(&mmc_base->sysctl) & bit)) {
825                         if (get_timer(0) - start > MMC_TIMEOUT_MS)
826                                 return;
827                 }
828         }
829 #endif
830         start = get_timer(0);
831         while ((readl(&mmc_base->sysctl) & bit) != 0) {
832                 if (get_timer(0) - start > MAX_RETRY_MS) {
833                         printf("%s: timedout waiting for sysctl %x to clear\n",
834                                 __func__, bit);
835                         return;
836                 }
837         }
838 }
839
840 #ifdef CONFIG_MMC_OMAP_HS_ADMA
841 static void omap_hsmmc_adma_desc(struct mmc *mmc, char *buf, u16 len, bool end)
842 {
843         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
844         struct omap_hsmmc_adma_desc *desc;
845         u8 attr;
846
847         desc = &priv->adma_desc_table[priv->desc_slot];
848
849         attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA;
850         if (!end)
851                 priv->desc_slot++;
852         else
853                 attr |= ADMA_DESC_ATTR_END;
854
855         desc->len = len;
856         desc->addr = (u32)buf;
857         desc->reserved = 0;
858         desc->attr = attr;
859 }
860
861 static void omap_hsmmc_prepare_adma_table(struct mmc *mmc,
862                                           struct mmc_data *data)
863 {
864         uint total_len = data->blocksize * data->blocks;
865         uint desc_count = DIV_ROUND_UP(total_len, ADMA_MAX_LEN);
866         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
867         int i = desc_count;
868         char *buf;
869
870         priv->desc_slot = 0;
871         priv->adma_desc_table = (struct omap_hsmmc_adma_desc *)
872                                 memalign(ARCH_DMA_MINALIGN, desc_count *
873                                 sizeof(struct omap_hsmmc_adma_desc));
874
875         if (data->flags & MMC_DATA_READ)
876                 buf = data->dest;
877         else
878                 buf = (char *)data->src;
879
880         while (--i) {
881                 omap_hsmmc_adma_desc(mmc, buf, ADMA_MAX_LEN, false);
882                 buf += ADMA_MAX_LEN;
883                 total_len -= ADMA_MAX_LEN;
884         }
885
886         omap_hsmmc_adma_desc(mmc, buf, total_len, true);
887
888         flush_dcache_range((long)priv->adma_desc_table,
889                            (long)priv->adma_desc_table +
890                            ROUND(desc_count *
891                            sizeof(struct omap_hsmmc_adma_desc),
892                            ARCH_DMA_MINALIGN));
893 }
894
895 static void omap_hsmmc_prepare_data(struct mmc *mmc, struct mmc_data *data)
896 {
897         struct hsmmc *mmc_base;
898         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
899         u32 val;
900         char *buf;
901
902         mmc_base = priv->base_addr;
903         omap_hsmmc_prepare_adma_table(mmc, data);
904
905         if (data->flags & MMC_DATA_READ)
906                 buf = data->dest;
907         else
908                 buf = (char *)data->src;
909
910         val = readl(&mmc_base->hctl);
911         val |= DMA_SELECT;
912         writel(val, &mmc_base->hctl);
913
914         val = readl(&mmc_base->con);
915         val |= DMA_MASTER;
916         writel(val, &mmc_base->con);
917
918         writel((u32)priv->adma_desc_table, &mmc_base->admasal);
919
920         flush_dcache_range((u32)buf,
921                            (u32)buf +
922                            ROUND(data->blocksize * data->blocks,
923                                  ARCH_DMA_MINALIGN));
924 }
925
926 static void omap_hsmmc_dma_cleanup(struct mmc *mmc)
927 {
928         struct hsmmc *mmc_base;
929         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
930         u32 val;
931
932         mmc_base = priv->base_addr;
933
934         val = readl(&mmc_base->con);
935         val &= ~DMA_MASTER;
936         writel(val, &mmc_base->con);
937
938         val = readl(&mmc_base->hctl);
939         val &= ~DMA_SELECT;
940         writel(val, &mmc_base->hctl);
941
942         kfree(priv->adma_desc_table);
943 }
944 #else
945 #define omap_hsmmc_adma_desc
946 #define omap_hsmmc_prepare_adma_table
947 #define omap_hsmmc_prepare_data
948 #define omap_hsmmc_dma_cleanup
949 #endif
950
951 #if !CONFIG_IS_ENABLED(DM_MMC)
952 static int omap_hsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
953                         struct mmc_data *data)
954 {
955         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
956 #else
957 static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
958                         struct mmc_data *data)
959 {
960         struct omap_hsmmc_data *priv = dev_get_priv(dev);
961         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
962         struct mmc *mmc = upriv->mmc;
963 #endif
964         struct hsmmc *mmc_base;
965         unsigned int flags, mmc_stat;
966         ulong start;
967         priv->last_cmd = cmd->cmdidx;
968
969         mmc_base = priv->base_addr;
970
971         if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
972                 return 0;
973
974         start = get_timer(0);
975         while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) {
976                 if (get_timer(0) - start > MAX_RETRY_MS) {
977                         printf("%s: timedout waiting on cmd inhibit to clear\n",
978                                         __func__);
979                         return -ETIMEDOUT;
980                 }
981         }
982         writel(0xFFFFFFFF, &mmc_base->stat);
983         start = get_timer(0);
984         while (readl(&mmc_base->stat)) {
985                 if (get_timer(0) - start > MAX_RETRY_MS) {
986                         printf("%s: timedout waiting for STAT (%x) to clear\n",
987                                 __func__, readl(&mmc_base->stat));
988                         return -ETIMEDOUT;
989                 }
990         }
991         /*
992          * CMDREG
993          * CMDIDX[13:8] : Command index
994          * DATAPRNT[5]  : Data Present Select
995          * ENCMDIDX[4]  : Command Index Check Enable
996          * ENCMDCRC[3]  : Command CRC Check Enable
997          * RSPTYP[1:0]
998          *      00 = No Response
999          *      01 = Length 136
1000          *      10 = Length 48
1001          *      11 = Length 48 Check busy after response
1002          */
1003         /* Delay added before checking the status of frq change
1004          * retry not supported by mmc.c(core file)
1005          */
1006         if (cmd->cmdidx == SD_CMD_APP_SEND_SCR)
1007                 udelay(50000); /* wait 50 ms */
1008
1009         if (!(cmd->resp_type & MMC_RSP_PRESENT))
1010                 flags = 0;
1011         else if (cmd->resp_type & MMC_RSP_136)
1012                 flags = RSP_TYPE_LGHT136 | CICE_NOCHECK;
1013         else if (cmd->resp_type & MMC_RSP_BUSY)
1014                 flags = RSP_TYPE_LGHT48B;
1015         else
1016                 flags = RSP_TYPE_LGHT48;
1017
1018         /* enable default flags */
1019         flags = flags | (CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK |
1020                         MSBS_SGLEBLK);
1021         flags &= ~(ACEN_ENABLE | BCE_ENABLE | DE_ENABLE);
1022
1023         if (cmd->resp_type & MMC_RSP_CRC)
1024                 flags |= CCCE_CHECK;
1025         if (cmd->resp_type & MMC_RSP_OPCODE)
1026                 flags |= CICE_CHECK;
1027
1028         if (data) {
1029                 if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) ||
1030                          (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) {
1031                         flags |= (MSBS_MULTIBLK | BCE_ENABLE | ACEN_ENABLE);
1032                         data->blocksize = 512;
1033                         writel(data->blocksize | (data->blocks << 16),
1034                                                         &mmc_base->blk);
1035                 } else
1036                         writel(data->blocksize | NBLK_STPCNT, &mmc_base->blk);
1037
1038                 if (data->flags & MMC_DATA_READ)
1039                         flags |= (DP_DATA | DDIR_READ);
1040                 else
1041                         flags |= (DP_DATA | DDIR_WRITE);
1042
1043 #ifdef CONFIG_MMC_OMAP_HS_ADMA
1044                 if ((priv->controller_flags & OMAP_HSMMC_USE_ADMA) &&
1045                     !mmc_is_tuning_cmd(cmd->cmdidx)) {
1046                         omap_hsmmc_prepare_data(mmc, data);
1047                         flags |= DE_ENABLE;
1048                 }
1049 #endif
1050         }
1051
1052         mmc_enable_irq(mmc, cmd);
1053
1054         writel(cmd->cmdarg, &mmc_base->arg);
1055         udelay(20);             /* To fix "No status update" error on eMMC */
1056         writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
1057
1058         start = get_timer(0);
1059         do {
1060                 mmc_stat = readl(&mmc_base->stat);
1061                 if (get_timer(start) > MAX_RETRY_MS) {
1062                         printf("%s : timeout: No status update\n", __func__);
1063                         return -ETIMEDOUT;
1064                 }
1065         } while (!mmc_stat);
1066
1067         if ((mmc_stat & IE_CTO) != 0) {
1068                 mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC);
1069                 return -ETIMEDOUT;
1070         } else if ((mmc_stat & ERRI_MASK) != 0)
1071                 return -1;
1072
1073         if (mmc_stat & CC_MASK) {
1074                 writel(CC_MASK, &mmc_base->stat);
1075                 if (cmd->resp_type & MMC_RSP_PRESENT) {
1076                         if (cmd->resp_type & MMC_RSP_136) {
1077                                 /* response type 2 */
1078                                 cmd->response[3] = readl(&mmc_base->rsp10);
1079                                 cmd->response[2] = readl(&mmc_base->rsp32);
1080                                 cmd->response[1] = readl(&mmc_base->rsp54);
1081                                 cmd->response[0] = readl(&mmc_base->rsp76);
1082                         } else
1083                                 /* response types 1, 1b, 3, 4, 5, 6 */
1084                                 cmd->response[0] = readl(&mmc_base->rsp10);
1085                 }
1086         }
1087
1088 #ifdef CONFIG_MMC_OMAP_HS_ADMA
1089         if ((priv->controller_flags & OMAP_HSMMC_USE_ADMA) && data &&
1090             !mmc_is_tuning_cmd(cmd->cmdidx)) {
1091                 u32 sz_mb, timeout;
1092
1093                 if (mmc_stat & IE_ADMAE) {
1094                         omap_hsmmc_dma_cleanup(mmc);
1095                         return -EIO;
1096                 }
1097
1098                 sz_mb = DIV_ROUND_UP(data->blocksize *  data->blocks, 1 << 20);
1099                 timeout = sz_mb * DMA_TIMEOUT_PER_MB;
1100                 if (timeout < MAX_RETRY_MS)
1101                         timeout = MAX_RETRY_MS;
1102
1103                 start = get_timer(0);
1104                 do {
1105                         mmc_stat = readl(&mmc_base->stat);
1106                         if (mmc_stat & TC_MASK) {
1107                                 writel(readl(&mmc_base->stat) | TC_MASK,
1108                                        &mmc_base->stat);
1109                                 break;
1110                         }
1111                         if (get_timer(start) > timeout) {
1112                                 printf("%s : DMA timeout: No status update\n",
1113                                        __func__);
1114                                 return -ETIMEDOUT;
1115                         }
1116                 } while (1);
1117
1118                 omap_hsmmc_dma_cleanup(mmc);
1119                 return 0;
1120         }
1121 #endif
1122
1123         if (data && (data->flags & MMC_DATA_READ)) {
1124                 mmc_read_data(mmc_base, data->dest,
1125                                 data->blocksize * data->blocks);
1126         } else if (data && (data->flags & MMC_DATA_WRITE)) {
1127                 mmc_write_data(mmc_base, data->src,
1128                                 data->blocksize * data->blocks);
1129         }
1130         return 0;
1131 }
1132
1133 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size)
1134 {
1135         unsigned int *output_buf = (unsigned int *)buf;
1136         unsigned int mmc_stat;
1137         unsigned int count;
1138
1139         /*
1140          * Start Polled Read
1141          */
1142         count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
1143         count /= 4;
1144
1145         while (size) {
1146                 ulong start = get_timer(0);
1147                 do {
1148                         mmc_stat = readl(&mmc_base->stat);
1149                         if (get_timer(0) - start > MAX_RETRY_MS) {
1150                                 printf("%s: timedout waiting for status!\n",
1151                                                 __func__);
1152                                 return -ETIMEDOUT;
1153                         }
1154                 } while (mmc_stat == 0);
1155
1156                 if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0)
1157                         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
1158
1159                 if ((mmc_stat & ERRI_MASK) != 0)
1160                         return 1;
1161
1162                 if (mmc_stat & BRR_MASK) {
1163                         unsigned int k;
1164
1165                         writel(readl(&mmc_base->stat) | BRR_MASK,
1166                                 &mmc_base->stat);
1167                         for (k = 0; k < count; k++) {
1168                                 *output_buf = readl(&mmc_base->data);
1169                                 output_buf++;
1170                         }
1171                         size -= (count*4);
1172                 }
1173
1174                 if (mmc_stat & BWR_MASK)
1175                         writel(readl(&mmc_base->stat) | BWR_MASK,
1176                                 &mmc_base->stat);
1177
1178                 if (mmc_stat & TC_MASK) {
1179                         writel(readl(&mmc_base->stat) | TC_MASK,
1180                                 &mmc_base->stat);
1181                         break;
1182                 }
1183         }
1184         return 0;
1185 }
1186
1187 #if CONFIG_IS_ENABLED(MMC_WRITE)
1188 static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
1189                           unsigned int size)
1190 {
1191         unsigned int *input_buf = (unsigned int *)buf;
1192         unsigned int mmc_stat;
1193         unsigned int count;
1194
1195         /*
1196          * Start Polled Write
1197          */
1198         count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
1199         count /= 4;
1200
1201         while (size) {
1202                 ulong start = get_timer(0);
1203                 do {
1204                         mmc_stat = readl(&mmc_base->stat);
1205                         if (get_timer(0) - start > MAX_RETRY_MS) {
1206                                 printf("%s: timedout waiting for status!\n",
1207                                                 __func__);
1208                                 return -ETIMEDOUT;
1209                         }
1210                 } while (mmc_stat == 0);
1211
1212                 if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0)
1213                         mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
1214
1215                 if ((mmc_stat & ERRI_MASK) != 0)
1216                         return 1;
1217
1218                 if (mmc_stat & BWR_MASK) {
1219                         unsigned int k;
1220
1221                         writel(readl(&mmc_base->stat) | BWR_MASK,
1222                                         &mmc_base->stat);
1223                         for (k = 0; k < count; k++) {
1224                                 writel(*input_buf, &mmc_base->data);
1225                                 input_buf++;
1226                         }
1227                         size -= (count*4);
1228                 }
1229
1230                 if (mmc_stat & BRR_MASK)
1231                         writel(readl(&mmc_base->stat) | BRR_MASK,
1232                                 &mmc_base->stat);
1233
1234                 if (mmc_stat & TC_MASK) {
1235                         writel(readl(&mmc_base->stat) | TC_MASK,
1236                                 &mmc_base->stat);
1237                         break;
1238                 }
1239         }
1240         return 0;
1241 }
1242 #else
1243 static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
1244                           unsigned int size)
1245 {
1246         return -ENOTSUPP;
1247 }
1248 #endif
1249 static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base)
1250 {
1251         writel(readl(&mmc_base->sysctl) & ~CEN_ENABLE, &mmc_base->sysctl);
1252 }
1253
1254 static void omap_hsmmc_start_clock(struct hsmmc *mmc_base)
1255 {
1256         writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
1257 }
1258
1259 static void omap_hsmmc_set_clock(struct mmc *mmc)
1260 {
1261         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1262         struct hsmmc *mmc_base;
1263         unsigned int dsor = 0;
1264         ulong start;
1265
1266         mmc_base = priv->base_addr;
1267         omap_hsmmc_stop_clock(mmc_base);
1268
1269         /* TODO: Is setting DTO required here? */
1270         mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK),
1271                     (ICE_STOP | DTO_15THDTO));
1272
1273         if (mmc->clock != 0) {
1274                 dsor = DIV_ROUND_UP(MMC_CLOCK_REFERENCE * 1000000, mmc->clock);
1275                 if (dsor > CLKD_MAX)
1276                         dsor = CLKD_MAX;
1277         } else {
1278                 dsor = CLKD_MAX;
1279         }
1280
1281         mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
1282                     (dsor << CLKD_OFFSET) | ICE_OSCILLATE);
1283
1284         start = get_timer(0);
1285         while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
1286                 if (get_timer(0) - start > MAX_RETRY_MS) {
1287                         printf("%s: timedout waiting for ics!\n", __func__);
1288                         return;
1289                 }
1290         }
1291
1292         priv->clock = MMC_CLOCK_REFERENCE * 1000000 / dsor;
1293         mmc->clock = priv->clock;
1294         omap_hsmmc_start_clock(mmc_base);
1295 }
1296
1297 static void omap_hsmmc_set_bus_width(struct mmc *mmc)
1298 {
1299         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1300         struct hsmmc *mmc_base;
1301
1302         mmc_base = priv->base_addr;
1303         /* configue bus width */
1304         switch (mmc->bus_width) {
1305         case 8:
1306                 writel(readl(&mmc_base->con) | DTW_8_BITMODE,
1307                         &mmc_base->con);
1308                 break;
1309
1310         case 4:
1311                 writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
1312                         &mmc_base->con);
1313                 writel(readl(&mmc_base->hctl) | DTW_4_BITMODE,
1314                         &mmc_base->hctl);
1315                 break;
1316
1317         case 1:
1318         default:
1319                 writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
1320                         &mmc_base->con);
1321                 writel(readl(&mmc_base->hctl) & ~DTW_4_BITMODE,
1322                         &mmc_base->hctl);
1323                 break;
1324         }
1325
1326         priv->bus_width = mmc->bus_width;
1327 }
1328
1329 #if !CONFIG_IS_ENABLED(DM_MMC)
1330 static int omap_hsmmc_set_ios(struct mmc *mmc)
1331 {
1332         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1333 #else
1334 static int omap_hsmmc_set_ios(struct udevice *dev)
1335 {
1336         struct omap_hsmmc_data *priv = dev_get_priv(dev);
1337         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
1338         struct mmc *mmc = upriv->mmc;
1339 #endif
1340         struct hsmmc *mmc_base = priv->base_addr;
1341         int ret = 0;
1342
1343         if (priv->bus_width != mmc->bus_width)
1344                 omap_hsmmc_set_bus_width(mmc);
1345
1346         if (priv->clock != mmc->clock)
1347                 omap_hsmmc_set_clock(mmc);
1348
1349         if (mmc->clk_disable)
1350                 omap_hsmmc_stop_clock(mmc_base);
1351         else
1352                 omap_hsmmc_start_clock(mmc_base);
1353
1354 #if CONFIG_IS_ENABLED(DM_MMC)
1355         if (priv->mode != mmc->selected_mode)
1356                 omap_hsmmc_set_timing(mmc);
1357
1358 #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
1359         if (priv->signal_voltage != mmc->signal_voltage)
1360                 ret = omap_hsmmc_set_signal_voltage(mmc);
1361 #endif
1362 #endif
1363         return ret;
1364 }
1365
1366 #ifdef OMAP_HSMMC_USE_GPIO
1367 #if CONFIG_IS_ENABLED(DM_MMC)
1368 static int omap_hsmmc_getcd(struct udevice *dev)
1369 {
1370         int value = -1;
1371 #if CONFIG_IS_ENABLED(DM_GPIO)
1372         struct omap_hsmmc_data *priv = dev_get_priv(dev);
1373         value = dm_gpio_get_value(&priv->cd_gpio);
1374 #endif
1375         /* if no CD return as 1 */
1376         if (value < 0)
1377                 return 1;
1378
1379         return value;
1380 }
1381
1382 static int omap_hsmmc_getwp(struct udevice *dev)
1383 {
1384         int value = 0;
1385 #if CONFIG_IS_ENABLED(DM_GPIO)
1386         struct omap_hsmmc_data *priv = dev_get_priv(dev);
1387         value = dm_gpio_get_value(&priv->wp_gpio);
1388 #endif
1389         /* if no WP return as 0 */
1390         if (value < 0)
1391                 return 0;
1392         return value;
1393 }
1394 #else
1395 static int omap_hsmmc_getcd(struct mmc *mmc)
1396 {
1397         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1398         int cd_gpio;
1399
1400         /* if no CD return as 1 */
1401         cd_gpio = priv->cd_gpio;
1402         if (cd_gpio < 0)
1403                 return 1;
1404
1405         /* NOTE: assumes card detect signal is active-low */
1406         return !gpio_get_value(cd_gpio);
1407 }
1408
1409 static int omap_hsmmc_getwp(struct mmc *mmc)
1410 {
1411         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1412         int wp_gpio;
1413
1414         /* if no WP return as 0 */
1415         wp_gpio = priv->wp_gpio;
1416         if (wp_gpio < 0)
1417                 return 0;
1418
1419         /* NOTE: assumes write protect signal is active-high */
1420         return gpio_get_value(wp_gpio);
1421 }
1422 #endif
1423 #endif
1424
1425 #if CONFIG_IS_ENABLED(DM_MMC)
1426 static const struct dm_mmc_ops omap_hsmmc_ops = {
1427         .send_cmd       = omap_hsmmc_send_cmd,
1428         .set_ios        = omap_hsmmc_set_ios,
1429 #ifdef OMAP_HSMMC_USE_GPIO
1430         .get_cd         = omap_hsmmc_getcd,
1431         .get_wp         = omap_hsmmc_getwp,
1432 #endif
1433 #ifdef MMC_SUPPORTS_TUNING
1434         .execute_tuning = omap_hsmmc_execute_tuning,
1435 #endif
1436         .send_init_stream       = omap_hsmmc_send_init_stream,
1437 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1438         .wait_dat0      = omap_hsmmc_wait_dat0,
1439 #endif
1440 };
1441 #else
1442 static const struct mmc_ops omap_hsmmc_ops = {
1443         .send_cmd       = omap_hsmmc_send_cmd,
1444         .set_ios        = omap_hsmmc_set_ios,
1445         .init           = omap_hsmmc_init_setup,
1446 #ifdef OMAP_HSMMC_USE_GPIO
1447         .getcd          = omap_hsmmc_getcd,
1448         .getwp          = omap_hsmmc_getwp,
1449 #endif
1450 };
1451 #endif
1452
1453 #if !CONFIG_IS_ENABLED(DM_MMC)
1454 int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
1455                 int wp_gpio)
1456 {
1457         struct mmc *mmc;
1458         struct omap_hsmmc_data *priv;
1459         struct mmc_config *cfg;
1460         uint host_caps_val;
1461
1462         priv = calloc(1, sizeof(*priv));
1463         if (priv == NULL)
1464                 return -1;
1465
1466         host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
1467
1468         switch (dev_index) {
1469         case 0:
1470                 priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
1471                 break;
1472 #ifdef OMAP_HSMMC2_BASE
1473         case 1:
1474                 priv->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
1475 #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
1476         defined(CONFIG_DRA7XX) || defined(CONFIG_AM33XX) || \
1477         defined(CONFIG_AM43XX) || defined(CONFIG_SOC_KEYSTONE)) && \
1478                 defined(CONFIG_HSMMC2_8BIT)
1479                 /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
1480                 host_caps_val |= MMC_MODE_8BIT;
1481 #endif
1482                 break;
1483 #endif
1484 #ifdef OMAP_HSMMC3_BASE
1485         case 2:
1486                 priv->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
1487 #if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
1488                 /* Enable 8-bit interface for eMMC on DRA7XX */
1489                 host_caps_val |= MMC_MODE_8BIT;
1490 #endif
1491                 break;
1492 #endif
1493         default:
1494                 priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
1495                 return 1;
1496         }
1497 #ifdef OMAP_HSMMC_USE_GPIO
1498         /* on error gpio values are set to -1, which is what we want */
1499         priv->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
1500         priv->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
1501 #endif
1502
1503         cfg = &priv->cfg;
1504
1505         cfg->name = "OMAP SD/MMC";
1506         cfg->ops = &omap_hsmmc_ops;
1507
1508         cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
1509         cfg->host_caps = host_caps_val & ~host_caps_mask;
1510
1511         cfg->f_min = 400000;
1512
1513         if (f_max != 0)
1514                 cfg->f_max = f_max;
1515         else {
1516                 if (cfg->host_caps & MMC_MODE_HS) {
1517                         if (cfg->host_caps & MMC_MODE_HS_52MHz)
1518                                 cfg->f_max = 52000000;
1519                         else
1520                                 cfg->f_max = 26000000;
1521                 } else
1522                         cfg->f_max = 20000000;
1523         }
1524
1525         cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
1526
1527 #if defined(CONFIG_OMAP34XX)
1528         /*
1529          * Silicon revs 2.1 and older do not support multiblock transfers.
1530          */
1531         if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21))
1532                 cfg->b_max = 1;
1533 #endif
1534
1535         mmc = mmc_create(cfg, priv);
1536         if (mmc == NULL)
1537                 return -1;
1538
1539         return 0;
1540 }
1541 #else
1542
1543 #ifdef CONFIG_IODELAY_RECALIBRATION
1544 static struct pad_conf_entry *
1545 omap_hsmmc_get_pad_conf_entry(const fdt32_t *pinctrl, int count)
1546 {
1547         int index = 0;
1548         struct pad_conf_entry *padconf;
1549
1550         padconf = (struct pad_conf_entry *)malloc(sizeof(*padconf) * count);
1551         if (!padconf) {
1552                 debug("failed to allocate memory\n");
1553                 return 0;
1554         }
1555
1556         while (index < count) {
1557                 padconf[index].offset = fdt32_to_cpu(pinctrl[2 * index]);
1558                 padconf[index].val = fdt32_to_cpu(pinctrl[2 * index + 1]);
1559                 index++;
1560         }
1561
1562         return padconf;
1563 }
1564
1565 static struct iodelay_cfg_entry *
1566 omap_hsmmc_get_iodelay_cfg_entry(const fdt32_t *pinctrl, int count)
1567 {
1568         int index = 0;
1569         struct iodelay_cfg_entry *iodelay;
1570
1571         iodelay = (struct iodelay_cfg_entry *)malloc(sizeof(*iodelay) * count);
1572         if (!iodelay) {
1573                 debug("failed to allocate memory\n");
1574                 return 0;
1575         }
1576
1577         while (index < count) {
1578                 iodelay[index].offset = fdt32_to_cpu(pinctrl[3 * index]);
1579                 iodelay[index].a_delay = fdt32_to_cpu(pinctrl[3 * index + 1]);
1580                 iodelay[index].g_delay = fdt32_to_cpu(pinctrl[3 * index + 2]);
1581                 index++;
1582         }
1583
1584         return iodelay;
1585 }
1586
1587 static const fdt32_t *omap_hsmmc_get_pinctrl_entry(u32  phandle,
1588                                                    const char *name, int *len)
1589 {
1590         const void *fdt = gd->fdt_blob;
1591         int offset;
1592         const fdt32_t *pinctrl;
1593
1594         offset = fdt_node_offset_by_phandle(fdt, phandle);
1595         if (offset < 0) {
1596                 debug("failed to get pinctrl node %s.\n",
1597                       fdt_strerror(offset));
1598                 return 0;
1599         }
1600
1601         pinctrl = fdt_getprop(fdt, offset, name, len);
1602         if (!pinctrl) {
1603                 debug("failed to get property %s\n", name);
1604                 return 0;
1605         }
1606
1607         return pinctrl;
1608 }
1609
1610 static uint32_t omap_hsmmc_get_pad_conf_phandle(struct mmc *mmc,
1611                                                 char *prop_name)
1612 {
1613         const void *fdt = gd->fdt_blob;
1614         const __be32 *phandle;
1615         int node = dev_of_offset(mmc->dev);
1616
1617         phandle = fdt_getprop(fdt, node, prop_name, NULL);
1618         if (!phandle) {
1619                 debug("failed to get property %s\n", prop_name);
1620                 return 0;
1621         }
1622
1623         return fdt32_to_cpu(*phandle);
1624 }
1625
1626 static uint32_t omap_hsmmc_get_iodelay_phandle(struct mmc *mmc,
1627                                                char *prop_name)
1628 {
1629         const void *fdt = gd->fdt_blob;
1630         const __be32 *phandle;
1631         int len;
1632         int count;
1633         int node = dev_of_offset(mmc->dev);
1634
1635         phandle = fdt_getprop(fdt, node, prop_name, &len);
1636         if (!phandle) {
1637                 debug("failed to get property %s\n", prop_name);
1638                 return 0;
1639         }
1640
1641         /* No manual mode iodelay values if count < 2 */
1642         count = len / sizeof(*phandle);
1643         if (count < 2)
1644                 return 0;
1645
1646         return fdt32_to_cpu(*(phandle + 1));
1647 }
1648
1649 static struct pad_conf_entry *
1650 omap_hsmmc_get_pad_conf(struct mmc *mmc, char *prop_name, int *npads)
1651 {
1652         int len;
1653         int count;
1654         struct pad_conf_entry *padconf;
1655         u32 phandle;
1656         const fdt32_t *pinctrl;
1657
1658         phandle = omap_hsmmc_get_pad_conf_phandle(mmc, prop_name);
1659         if (!phandle)
1660                 return ERR_PTR(-EINVAL);
1661
1662         pinctrl = omap_hsmmc_get_pinctrl_entry(phandle, "pinctrl-single,pins",
1663                                                &len);
1664         if (!pinctrl)
1665                 return ERR_PTR(-EINVAL);
1666
1667         count = (len / sizeof(*pinctrl)) / 2;
1668         padconf = omap_hsmmc_get_pad_conf_entry(pinctrl, count);
1669         if (!padconf)
1670                 return ERR_PTR(-EINVAL);
1671
1672         *npads = count;
1673
1674         return padconf;
1675 }
1676
1677 static struct iodelay_cfg_entry *
1678 omap_hsmmc_get_iodelay(struct mmc *mmc, char *prop_name, int *niodelay)
1679 {
1680         int len;
1681         int count;
1682         struct iodelay_cfg_entry *iodelay;
1683         u32 phandle;
1684         const fdt32_t *pinctrl;
1685
1686         phandle = omap_hsmmc_get_iodelay_phandle(mmc, prop_name);
1687         /* Not all modes have manual mode iodelay values. So its not fatal */
1688         if (!phandle)
1689                 return 0;
1690
1691         pinctrl = omap_hsmmc_get_pinctrl_entry(phandle, "pinctrl-pin-array",
1692                                                &len);
1693         if (!pinctrl)
1694                 return ERR_PTR(-EINVAL);
1695
1696         count = (len / sizeof(*pinctrl)) / 3;
1697         iodelay = omap_hsmmc_get_iodelay_cfg_entry(pinctrl, count);
1698         if (!iodelay)
1699                 return ERR_PTR(-EINVAL);
1700
1701         *niodelay = count;
1702
1703         return iodelay;
1704 }
1705
1706 static struct omap_hsmmc_pinctrl_state *
1707 omap_hsmmc_get_pinctrl_by_mode(struct mmc *mmc, char *mode)
1708 {
1709         int index;
1710         int npads = 0;
1711         int niodelays = 0;
1712         const void *fdt = gd->fdt_blob;
1713         int node = dev_of_offset(mmc->dev);
1714         char prop_name[11];
1715         struct omap_hsmmc_pinctrl_state *pinctrl_state;
1716
1717         pinctrl_state = (struct omap_hsmmc_pinctrl_state *)
1718                          malloc(sizeof(*pinctrl_state));
1719         if (!pinctrl_state) {
1720                 debug("failed to allocate memory\n");
1721                 return 0;
1722         }
1723
1724         index = fdt_stringlist_search(fdt, node, "pinctrl-names", mode);
1725         if (index < 0) {
1726                 debug("fail to find %s mode %s\n", mode, fdt_strerror(index));
1727                 goto err_pinctrl_state;
1728         }
1729
1730         sprintf(prop_name, "pinctrl-%d", index);
1731
1732         pinctrl_state->padconf = omap_hsmmc_get_pad_conf(mmc, prop_name,
1733                                                          &npads);
1734         if (IS_ERR(pinctrl_state->padconf))
1735                 goto err_pinctrl_state;
1736         pinctrl_state->npads = npads;
1737
1738         pinctrl_state->iodelay = omap_hsmmc_get_iodelay(mmc, prop_name,
1739                                                         &niodelays);
1740         if (IS_ERR(pinctrl_state->iodelay))
1741                 goto err_padconf;
1742         pinctrl_state->niodelays = niodelays;
1743
1744         return pinctrl_state;
1745
1746 err_padconf:
1747         kfree(pinctrl_state->padconf);
1748
1749 err_pinctrl_state:
1750         kfree(pinctrl_state);
1751         return 0;
1752 }
1753
1754 #define OMAP_HSMMC_SETUP_PINCTRL(capmask, mode, optional)               \
1755         do {                                                            \
1756                 struct omap_hsmmc_pinctrl_state *s = NULL;              \
1757                 char str[20];                                           \
1758                 if (!(cfg->host_caps & capmask))                        \
1759                         break;                                          \
1760                                                                         \
1761                 if (priv->hw_rev) {                                     \
1762                         sprintf(str, "%s-%s", #mode, priv->hw_rev);     \
1763                         s = omap_hsmmc_get_pinctrl_by_mode(mmc, str);   \
1764                 }                                                       \
1765                                                                         \
1766                 if (!s)                                                 \
1767                         s = omap_hsmmc_get_pinctrl_by_mode(mmc, #mode); \
1768                                                                         \
1769                 if (!s && !optional) {                                  \
1770                         debug("%s: no pinctrl for %s\n",                \
1771                               mmc->dev->name, #mode);                   \
1772                         cfg->host_caps &= ~(capmask);                   \
1773                 } else {                                                \
1774                         priv->mode##_pinctrl_state = s;                 \
1775                 }                                                       \
1776         } while (0)
1777
1778 static int omap_hsmmc_get_pinctrl_state(struct mmc *mmc)
1779 {
1780         struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
1781         struct mmc_config *cfg = omap_hsmmc_get_cfg(mmc);
1782         struct omap_hsmmc_pinctrl_state *default_pinctrl;
1783
1784         if (!(priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY))
1785                 return 0;
1786
1787         default_pinctrl = omap_hsmmc_get_pinctrl_by_mode(mmc, "default");
1788         if (!default_pinctrl) {
1789                 printf("no pinctrl state for default mode\n");
1790                 return -EINVAL;
1791         }
1792
1793         priv->default_pinctrl_state = default_pinctrl;
1794
1795         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR104), sdr104, false);
1796         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR50), sdr50, false);
1797         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_DDR50), ddr50, false);
1798         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR25), sdr25, false);
1799         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR12), sdr12, false);
1800
1801         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(MMC_HS_200), hs200_1_8v, false);
1802         OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(MMC_DDR_52), ddr_1_8v, false);
1803         OMAP_HSMMC_SETUP_PINCTRL(MMC_MODE_HS, hs, true);
1804
1805         return 0;
1806 }
1807 #endif
1808
1809 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
1810 #ifdef CONFIG_OMAP54XX
1811 __weak const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
1812 {
1813         return NULL;
1814 }
1815 #endif
1816
1817 static int omap_hsmmc_ofdata_to_platdata(struct udevice *dev)
1818 {
1819         struct omap_hsmmc_plat *plat = dev_get_platdata(dev);
1820         struct omap_mmc_of_data *of_data = (void *)dev_get_driver_data(dev);
1821
1822         struct mmc_config *cfg = &plat->cfg;
1823 #ifdef CONFIG_OMAP54XX
1824         const struct mmc_platform_fixups *fixups;
1825 #endif
1826         const void *fdt = gd->fdt_blob;
1827         int node = dev_of_offset(dev);
1828         int ret;
1829
1830         plat->base_addr = map_physmem(devfdt_get_addr(dev),
1831                                       sizeof(struct hsmmc *),
1832                                       MAP_NOCACHE);
1833
1834         ret = mmc_of_parse(dev, cfg);
1835         if (ret < 0)
1836                 return ret;
1837
1838         if (!cfg->f_max)
1839                 cfg->f_max = 52000000;
1840         cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
1841         cfg->f_min = 400000;
1842         cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
1843         cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
1844         if (fdtdec_get_bool(fdt, node, "ti,dual-volt"))
1845                 plat->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
1846         if (fdtdec_get_bool(fdt, node, "no-1-8-v"))
1847                 plat->controller_flags |= OMAP_HSMMC_NO_1_8_V;
1848         if (of_data)
1849                 plat->controller_flags |= of_data->controller_flags;
1850
1851 #ifdef CONFIG_OMAP54XX
1852         fixups = platform_fixups_mmc(devfdt_get_addr(dev));
1853         if (fixups) {
1854                 plat->hw_rev = fixups->hw_rev;
1855                 cfg->host_caps &= ~fixups->unsupported_caps;
1856                 cfg->f_max = fixups->max_freq;
1857         }
1858 #endif
1859
1860         return 0;
1861 }
1862 #endif
1863
1864 #ifdef CONFIG_BLK
1865
1866 static int omap_hsmmc_bind(struct udevice *dev)
1867 {
1868         struct omap_hsmmc_plat *plat = dev_get_platdata(dev);
1869         plat->mmc = calloc(1, sizeof(struct mmc));
1870         return mmc_bind(dev, plat->mmc, &plat->cfg);
1871 }
1872 #endif
1873 static int omap_hsmmc_probe(struct udevice *dev)
1874 {
1875         struct omap_hsmmc_plat *plat = dev_get_platdata(dev);
1876         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
1877         struct omap_hsmmc_data *priv = dev_get_priv(dev);
1878         struct mmc_config *cfg = &plat->cfg;
1879         struct mmc *mmc;
1880 #ifdef CONFIG_IODELAY_RECALIBRATION
1881         int ret;
1882 #endif
1883
1884         cfg->name = "OMAP SD/MMC";
1885         priv->base_addr = plat->base_addr;
1886         priv->controller_flags = plat->controller_flags;
1887         priv->hw_rev = plat->hw_rev;
1888
1889 #ifdef CONFIG_BLK
1890         mmc = plat->mmc;
1891 #else
1892         mmc = mmc_create(cfg, priv);
1893         if (mmc == NULL)
1894                 return -1;
1895 #endif
1896 #if CONFIG_IS_ENABLED(DM_REGULATOR)
1897         device_get_supply_regulator(dev, "pbias-supply",
1898                                     &priv->pbias_supply);
1899 #endif
1900 #if defined(OMAP_HSMMC_USE_GPIO)
1901 #if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_GPIO)
1902         gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
1903         gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
1904 #endif
1905 #endif
1906
1907         mmc->dev = dev;
1908         upriv->mmc = mmc;
1909
1910 #ifdef CONFIG_IODELAY_RECALIBRATION
1911         ret = omap_hsmmc_get_pinctrl_state(mmc);
1912         /*
1913          * disable high speed modes for the platforms that require IO delay
1914          * and for which we don't have this information
1915          */
1916         if ((ret < 0) &&
1917             (priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY)) {
1918                 priv->controller_flags &= ~OMAP_HSMMC_REQUIRE_IODELAY;
1919                 cfg->host_caps &= ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_DDR_52) |
1920                                     UHS_CAPS);
1921         }
1922 #endif
1923
1924         return omap_hsmmc_init_setup(mmc);
1925 }
1926
1927 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
1928
1929 static const struct omap_mmc_of_data dra7_mmc_of_data = {
1930         .controller_flags = OMAP_HSMMC_REQUIRE_IODELAY,
1931 };
1932
1933 static const struct udevice_id omap_hsmmc_ids[] = {
1934         { .compatible = "ti,omap3-hsmmc" },
1935         { .compatible = "ti,omap4-hsmmc" },
1936         { .compatible = "ti,am33xx-hsmmc" },
1937         { .compatible = "ti,dra7-hsmmc", .data = (ulong)&dra7_mmc_of_data },
1938         { }
1939 };
1940 #endif
1941
1942 U_BOOT_DRIVER(omap_hsmmc) = {
1943         .name   = "omap_hsmmc",
1944         .id     = UCLASS_MMC,
1945 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
1946         .of_match = omap_hsmmc_ids,
1947         .ofdata_to_platdata = omap_hsmmc_ofdata_to_platdata,
1948         .platdata_auto_alloc_size = sizeof(struct omap_hsmmc_plat),
1949 #endif
1950 #ifdef CONFIG_BLK
1951         .bind = omap_hsmmc_bind,
1952 #endif
1953         .ops = &omap_hsmmc_ops,
1954         .probe  = omap_hsmmc_probe,
1955         .priv_auto_alloc_size = sizeof(struct omap_hsmmc_data),
1956 #if !CONFIG_IS_ENABLED(OF_CONTROL)
1957         .flags  = DM_FLAG_PRE_RELOC,
1958 #endif
1959 };
1960 #endif