drivers/mmc/host/vub300.c

   1 /*
   2  * Remote VUB300 SDIO/SDmem Host Controller Driver
   3  *
   4  * Copyright (C) 2010 Elan Digital Systems Limited
   5  *
   6  * based on USB Skeleton driver - 2.2
   7  *
   8  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation, version 2
  13  *
  14  * VUB300: is a USB 2.0 client device with a single SDIO/SDmem/MMC slot
  15  *         Any SDIO/SDmem/MMC device plugged into the VUB300 will appear,
  16  *         by virtue of this driver, to have been plugged into a local
  17  *         SDIO host controller, similar to, say, a PCI Ricoh controller
  18  *         This is because this kernel device driver is both a USB 2.0
  19  *         client device driver AND an MMC host controller driver. Thus
  20  *         if there is an existing driver for the inserted SDIO/SDmem/MMC
  21  *         device then that driver will be used by the kernel to manage
  22  *         the device in exactly the same fashion as if it had been
  23  *         directly plugged into, say, a local pci bus Ricoh controller
  24  *
  25  * RANT: this driver was written using a display 128x48 - converting it
  26  *       to a line width of 80 makes it very difficult to support. In
  27  *       particular functions have been broken down into sub functions
  28  *       and the original meaningful names have been shortened into
  29  *       cryptic ones.
  30  *       The problem is that executing a fragment of code subject to
  31  *       two conditions means an indentation of 24, thus leaving only
  32  *       56 characters for a C statement. And that is quite ridiculous!
  33  *
  34  * Data types: data passed to/from the VUB300 is fixed to a number of
  35  *             bits and driver data fields reflect that limit by using
  36  *             u8, u16, u32
  37  */
  38 #include <linux/kernel.h>
  39 #include <linux/errno.h>
  40 #include <linux/init.h>
  41 #include <linux/slab.h>
  42 #include <linux/module.h>
  43 #include <linux/kref.h>
  44 #include <linux/uaccess.h>
  45 #include <linux/usb.h>
  46 #include <linux/mutex.h>
  47 #include <linux/mmc/host.h>
  48 #include <linux/mmc/card.h>
  49 #include <linux/mmc/sdio_func.h>
  50 #include <linux/mmc/sdio_ids.h>
  51 #include <linux/workqueue.h>
  52 #include <linux/ctype.h>
  53 #include <linux/firmware.h>
  54 #include <linux/scatterlist.h>
  55
  56 struct host_controller_info {
  57         u8 info_size;
  58         u16 firmware_version;
  59         u8 number_of_ports;
  60 } __packed;
  61
  62 #define FIRMWARE_BLOCK_BOUNDARY 1024
  63 struct sd_command_header {
  64         u8 header_size;
  65         u8 header_type;
  66         u8 port_number;
  67         u8 command_type; /* Bit7 - Rd/Wr */
  68         u8 command_index;
  69         u8 transfer_size[4]; /* ReadSize + ReadSize */
  70         u8 response_type;
  71         u8 arguments[4];
  72         u8 block_count[2];
  73         u8 block_size[2];
  74         u8 block_boundary[2];
  75         u8 reserved[44]; /* to pad out to 64 bytes */
  76 } __packed;
  77
  78 struct sd_irqpoll_header {
  79         u8 header_size;
  80         u8 header_type;
  81         u8 port_number;
  82         u8 command_type; /* Bit7 - Rd/Wr */
  83         u8 padding[16]; /* don't ask why !! */
  84         u8 poll_timeout_msb;
  85         u8 poll_timeout_lsb;
  86         u8 reserved[42]; /* to pad out to 64 bytes */
  87 } __packed;
  88
  89 struct sd_common_header {
  90         u8 header_size;
  91         u8 header_type;
  92         u8 port_number;
  93 } __packed;
  94
  95 struct sd_response_header {
  96         u8 header_size;
  97         u8 header_type;
  98         u8 port_number;
  99         u8 command_type;
 100         u8 command_index;
 101         u8 command_response[0];
 102 } __packed;
 103
 104 struct sd_status_header {
 105         u8 header_size;
 106         u8 header_type;
 107         u8 port_number;
 108         u16 port_flags;
 109         u32 sdio_clock;
 110         u16 host_header_size;
 111         u16 func_header_size;
 112         u16 ctrl_header_size;
 113 } __packed;
 114
 115 struct sd_error_header {
 116         u8 header_size;
 117         u8 header_type;
 118         u8 port_number;
 119         u8 error_code;
 120 } __packed;
 121
 122 struct sd_interrupt_header {
 123         u8 header_size;
 124         u8 header_type;
 125         u8 port_number;
 126 } __packed;
 127
 128 struct offload_registers_access {
 129         u8 command_byte[4];
 130         u8 Respond_Byte[4];
 131 } __packed;
 132
 133 #define INTERRUPT_REGISTER_ACCESSES 15
 134 struct sd_offloaded_interrupt {
 135         u8 header_size;
 136         u8 header_type;
 137         u8 port_number;
 138         struct offload_registers_access reg[INTERRUPT_REGISTER_ACCESSES];
 139 } __packed;
 140
 141 struct sd_register_header {
 142         u8 header_size;
 143         u8 header_type;
 144         u8 port_number;
 145         u8 command_type;
 146         u8 command_index;
 147         u8 command_response[6];
 148 } __packed;
 149
 150 #define PIGGYBACK_REGISTER_ACCESSES 14
 151 struct sd_offloaded_piggyback {
 152         struct sd_register_header sdio;
 153         struct offload_registers_access reg[PIGGYBACK_REGISTER_ACCESSES];
 154 } __packed;
 155
 156 union sd_response {
 157         struct sd_common_header common;
 158         struct sd_status_header status;
 159         struct sd_error_header error;
 160         struct sd_interrupt_header interrupt;
 161         struct sd_response_header response;
 162         struct sd_offloaded_interrupt irq;
 163         struct sd_offloaded_piggyback pig;
 164 } __packed;
 165
 166 union sd_command {
 167         struct sd_command_header head;
 168         struct sd_irqpoll_header poll;
 169 } __packed;
 170
 171 enum SD_RESPONSE_TYPE {
 172         SDRT_UNSPECIFIED = 0,
 173         SDRT_NONE,
 174         SDRT_1,
 175         SDRT_1B,
 176         SDRT_2,
 177         SDRT_3,
 178         SDRT_4,
 179         SDRT_5,
 180         SDRT_5B,
 181         SDRT_6,
 182         SDRT_7,
 183 };
 184
 185 #define RESPONSE_INTERRUPT                      0x01
 186 #define RESPONSE_ERROR                          0x02
 187 #define RESPONSE_STATUS                         0x03
 188 #define RESPONSE_IRQ_DISABLED                   0x05
 189 #define RESPONSE_IRQ_ENABLED                    0x06
 190 #define RESPONSE_PIGGYBACKED                    0x07
 191 #define RESPONSE_NO_INTERRUPT                   0x08
 192 #define RESPONSE_PIG_DISABLED                   0x09
 193 #define RESPONSE_PIG_ENABLED                    0x0A
 194 #define SD_ERROR_1BIT_TIMEOUT                   0x01
 195 #define SD_ERROR_4BIT_TIMEOUT                   0x02
 196 #define SD_ERROR_1BIT_CRC_WRONG                 0x03
 197 #define SD_ERROR_4BIT_CRC_WRONG                 0x04
 198 #define SD_ERROR_1BIT_CRC_ERROR                 0x05
 199 #define SD_ERROR_4BIT_CRC_ERROR                 0x06
 200 #define SD_ERROR_NO_CMD_ENDBIT                  0x07
 201 #define SD_ERROR_NO_1BIT_DATEND                 0x08
 202 #define SD_ERROR_NO_4BIT_DATEND                 0x09
 203 #define SD_ERROR_1BIT_UNEXPECTED_TIMEOUT        0x0A
 204 #define SD_ERROR_4BIT_UNEXPECTED_TIMEOUT        0x0B
 205 #define SD_ERROR_ILLEGAL_COMMAND                0x0C
 206 #define SD_ERROR_NO_DEVICE                      0x0D
 207 #define SD_ERROR_TRANSFER_LENGTH                0x0E
 208 #define SD_ERROR_1BIT_DATA_TIMEOUT              0x0F
 209 #define SD_ERROR_4BIT_DATA_TIMEOUT              0x10
 210 #define SD_ERROR_ILLEGAL_STATE                  0x11
 211 #define SD_ERROR_UNKNOWN_ERROR                  0x12
 212 #define SD_ERROR_RESERVED_ERROR                 0x13
 213 #define SD_ERROR_INVALID_FUNCTION               0x14
 214 #define SD_ERROR_OUT_OF_RANGE                   0x15
 215 #define SD_ERROR_STAT_CMD                       0x16
 216 #define SD_ERROR_STAT_DATA                      0x17
 217 #define SD_ERROR_STAT_CMD_TIMEOUT               0x18
 218 #define SD_ERROR_SDCRDY_STUCK                   0x19
 219 #define SD_ERROR_UNHANDLED                      0x1A
 220 #define SD_ERROR_OVERRUN                        0x1B
 221 #define SD_ERROR_PIO_TIMEOUT                    0x1C
 222
 223 #define FUN(c) (0x000007 & (c->arg>>28))
 224 #define REG(c) (0x01FFFF & (c->arg>>9))
 225
 226 static bool limit_speed_to_24_MHz;
 227 module_param(limit_speed_to_24_MHz, bool, 0644);
 228 MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz");
 229
 230 static bool pad_input_to_usb_pkt;
 231 module_param(pad_input_to_usb_pkt, bool, 0644);
 232 MODULE_PARM_DESC(pad_input_to_usb_pkt,
 233                  "Pad USB data input transfers to whole USB Packet");
 234
 235 static bool disable_offload_processing;
 236 module_param(disable_offload_processing, bool, 0644);
 237 MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing");
 238
 239 static bool force_1_bit_data_xfers;
 240 module_param(force_1_bit_data_xfers, bool, 0644);
 241 MODULE_PARM_DESC(force_1_bit_data_xfers,
 242                  "Force SDIO Data Transfers to 1-bit Mode");
 243
 244 static bool force_polling_for_irqs;
 245 module_param(force_polling_for_irqs, bool, 0644);
 246 MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts");
 247
 248 static int firmware_irqpoll_timeout = 1024;
 249 module_param(firmware_irqpoll_timeout, int, 0644);
 250 MODULE_PARM_DESC(firmware_irqpoll_timeout, "VUB300 firmware irqpoll timeout");
 251
 252 static int force_max_req_size = 128;
 253 module_param(force_max_req_size, int, 0644);
 254 MODULE_PARM_DESC(force_max_req_size, "set max request size in kBytes");
 255
 256 #ifdef SMSC_DEVELOPMENT_BOARD
 257 static int firmware_rom_wait_states = 0x04;
 258 #else
 259 static int firmware_rom_wait_states = 0x1C;
 260 #endif
 261
 262 module_param(firmware_rom_wait_states, int, 0644);
 263 MODULE_PARM_DESC(firmware_rom_wait_states,
 264                  "ROM wait states byte=RRRIIEEE (Reserved Internal External)");
 265
 266 #define ELAN_VENDOR_ID          0x2201
 267 #define VUB300_VENDOR_ID        0x0424
 268 #define VUB300_PRODUCT_ID       0x012C
 269 static struct usb_device_id vub300_table[] = {
 270         {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)},
 271         {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)},
 272         {} /* Terminating entry */
 273 };
 274 MODULE_DEVICE_TABLE(usb, vub300_table);
 275
 276 static struct workqueue_struct *cmndworkqueue;
 277 static struct workqueue_struct *pollworkqueue;
 278 static struct workqueue_struct *deadworkqueue;
 279
 280 static inline int interface_to_InterfaceNumber(struct usb_interface *interface)
 281 {
 282         if (!interface)
 283                 return -1;
 284         if (!interface->cur_altsetting)
 285                 return -1;
 286         return interface->cur_altsetting->desc.bInterfaceNumber;
 287 }
 288
 289 struct sdio_register {
 290         unsigned func_num:3;
 291         unsigned sdio_reg:17;
 292         unsigned activate:1;
 293         unsigned prepared:1;
 294         unsigned regvalue:8;
 295         unsigned response:8;
 296         unsigned sparebit:26;
 297 };
 298
 299 struct vub300_mmc_host {
 300         struct usb_device *udev;
 301         struct usb_interface *interface;
 302         struct kref kref;
 303         struct mutex cmd_mutex;
 304         struct mutex irq_mutex;
 305         char vub_name[3 + (9 * 8) + 4 + 1]; /* max of 7 sdio fn's */
 306         u8 cmnd_out_ep; /* EndPoint for commands */
 307         u8 cmnd_res_ep; /* EndPoint for responses */
 308         u8 data_out_ep; /* EndPoint for out data */
 309         u8 data_inp_ep; /* EndPoint for inp data */
 310         bool card_powered;
 311         bool card_present;
 312         bool read_only;
 313         bool large_usb_packets;
 314         bool app_spec; /* ApplicationSpecific */
 315         bool irq_enabled; /* by the MMC CORE */
 316         bool irq_disabled; /* in the firmware */
 317         unsigned bus_width:4;
 318         u8 total_offload_count;
 319         u8 dynamic_register_count;
 320         u8 resp_len;
 321         u32 datasize;
 322         int errors;
 323         int usb_transport_fail;
 324         int usb_timed_out;
 325         int irqs_queued;
 326         struct sdio_register sdio_register[16];
 327         struct offload_interrupt_function_register {
 328 #define MAXREGBITS 4
 329 #define MAXREGS (1<<MAXREGBITS)
 330 #define MAXREGMASK (MAXREGS-1)
 331                 u8 offload_count;
 332                 u32 offload_point;
 333                 struct offload_registers_access reg[MAXREGS];
 334         } fn[8];
 335         u16 fbs[8]; /* Function Block Size */
 336         struct mmc_command *cmd;
 337         struct mmc_request *req;
 338         struct mmc_data *data;
 339         struct mmc_host *mmc;
 340         struct urb *urb;
 341         struct urb *command_out_urb;
 342         struct urb *command_res_urb;
 343         struct completion command_complete;
 344         struct completion irqpoll_complete;
 345         union sd_command cmnd;
 346         union sd_response resp;
 347         struct timer_list sg_transfer_timer;
 348         struct usb_sg_request sg_request;
 349         struct timer_list inactivity_timer;
 350         struct work_struct deadwork;
 351         struct work_struct cmndwork;
 352         struct delayed_work pollwork;
 353         struct host_controller_info hc_info;
 354         struct sd_status_header system_port_status;
 355         u8 padded_buffer[64];
 356 };
 357
 358 #define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref)
 359 #define SET_TRANSFER_PSEUDOCODE         21
 360 #define SET_INTERRUPT_PSEUDOCODE        20
 361 #define SET_FAILURE_MODE                18
 362 #define SET_ROM_WAIT_STATES             16
 363 #define SET_IRQ_ENABLE                  13
 364 #define SET_CLOCK_SPEED                 11
 365 #define SET_FUNCTION_BLOCK_SIZE         9
 366 #define SET_SD_DATA_MODE                6
 367 #define SET_SD_POWER                    4
 368 #define ENTER_DFU_MODE                  3
 369 #define GET_HC_INF0                     1
 370 #define GET_SYSTEM_PORT_STATUS          0
 371
 372 static void vub300_delete(struct kref *kref)
 373 {                               /* kref callback - softirq */
 374         struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
 375         struct mmc_host *mmc = vub300->mmc;
 376         usb_free_urb(vub300->command_out_urb);
 377         vub300->command_out_urb = NULL;
 378         usb_free_urb(vub300->command_res_urb);
 379         vub300->command_res_urb = NULL;
 380         usb_put_dev(vub300->udev);
 381         mmc_free_host(mmc);
 382         /*
 383          * and hence also frees vub300
 384          * which is contained at the end of struct mmc
 385          */
 386 }
 387
 388 static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300)
 389 {
 390         kref_get(&vub300->kref);
 391         if (queue_work(cmndworkqueue, &vub300->cmndwork)) {
 392                 /*
 393                  * then the cmndworkqueue was not previously
 394                  * running and the above get ref is obvious
 395                  * required and will be put when the thread
 396                  * terminates by a specific call
 397                  */
 398         } else {
 399                 /*
 400                  * the cmndworkqueue was already running from
 401                  * a previous invocation and thus to keep the
 402                  * kref counts correct we must undo the get
 403                  */
 404                 kref_put(&vub300->kref, vub300_delete);
 405         }
 406 }
 407
 408 static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay)
 409 {
 410         kref_get(&vub300->kref);
 411         if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) {
 412                 /*
 413                  * then the pollworkqueue was not previously
 414                  * running and the above get ref is obvious
 415                  * required and will be put when the thread
 416                  * terminates by a specific call
 417                  */
 418         } else {
 419                 /*
 420                  * the pollworkqueue was already running from
 421                  * a previous invocation and thus to keep the
 422                  * kref counts correct we must undo the get
 423                  */
 424                 kref_put(&vub300->kref, vub300_delete);
 425         }
 426 }
 427
 428 static void vub300_queue_dead_work(struct vub300_mmc_host *vub300)
 429 {
 430         kref_get(&vub300->kref);
 431         if (queue_work(deadworkqueue, &vub300->deadwork)) {
 432                 /*
 433                  * then the deadworkqueue was not previously
 434                  * running and the above get ref is obvious
 435                  * required and will be put when the thread
 436                  * terminates by a specific call
 437                  */
 438         } else {
 439                 /*
 440                  * the deadworkqueue was already running from
 441                  * a previous invocation and thus to keep the
 442                  * kref counts correct we must undo the get
 443                  */
 444                 kref_put(&vub300->kref, vub300_delete);
 445         }
 446 }
 447
 448 static void irqpoll_res_completed(struct urb *urb)
 449 {                               /* urb completion handler - hardirq */
 450         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
 451         if (urb->status)
 452                 vub300->usb_transport_fail = urb->status;
 453         complete(&vub300->irqpoll_complete);
 454 }
 455
 456 static void irqpoll_out_completed(struct urb *urb)
 457 {                               /* urb completion handler - hardirq */
 458         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
 459         if (urb->status) {
 460                 vub300->usb_transport_fail = urb->status;
 461                 complete(&vub300->irqpoll_complete);
 462                 return;
 463         } else {
 464                 int ret;
 465                 unsigned int pipe =
 466                         usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep);
 467                 usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe,
 468                                   &vub300->resp, sizeof(vub300->resp),
 469                                   irqpoll_res_completed, vub300);
 470                 vub300->command_res_urb->actual_length = 0;
 471                 ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC);
 472                 if (ret) {
 473                         vub300->usb_transport_fail = ret;
 474                         complete(&vub300->irqpoll_complete);
 475                 }
 476                 return;
 477         }
 478 }
 479
 480 static void send_irqpoll(struct vub300_mmc_host *vub300)
 481 {
 482         /* cmd_mutex is held by vub300_pollwork_thread */
 483         int retval;
 484         int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout);
 485         vub300->cmnd.poll.header_size = 22;
 486         vub300->cmnd.poll.header_type = 1;
 487         vub300->cmnd.poll.port_number = 0;
 488         vub300->cmnd.poll.command_type = 2;
 489         vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout;
 490         vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8);
 491         usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev,
 492                           usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep)
 493                           , &vub300->cmnd, sizeof(vub300->cmnd)
 494                           , irqpoll_out_completed, vub300);
 495         retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL);
 496         if (0 > retval) {
 497                 vub300->usb_transport_fail = retval;
 498                 vub300_queue_poll_work(vub300, 1);
 499                 complete(&vub300->irqpoll_complete);
 500                 return;
 501         } else {
 502                 return;
 503         }
 504 }
 505
 506 static void new_system_port_status(struct vub300_mmc_host *vub300)
 507 {
 508         int old_card_present = vub300->card_present;
 509         int new_card_present =
 510                 (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
 511         vub300->read_only =
 512                 (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
 513         if (new_card_present && !old_card_present) {
 514                 dev_info(&vub300->udev->dev, "card just inserted\n");
 515                 vub300->card_present = 1;
 516                 vub300->bus_width = 0;
 517                 if (disable_offload_processing)
 518                         strncpy(vub300->vub_name, "EMPTY Processing Disabled",
 519                                 sizeof(vub300->vub_name));
 520                 else
 521                         vub300->vub_name[0] = 0;
 522                 mmc_detect_change(vub300->mmc, 1);
 523         } else if (!new_card_present && old_card_present) {
 524                 dev_info(&vub300->udev->dev, "card just ejected\n");
 525                 vub300->card_present = 0;
 526                 mmc_detect_change(vub300->mmc, 0);
 527         } else {
 528                 /* no change */
 529         }
 530 }
 531
 532 static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300,
 533                                         struct offload_registers_access
 534                                         *register_access, u8 func)
 535 {
 536         u8 r = vub300->fn[func].offload_point + vub300->fn[func].offload_count;
 537         memcpy(&vub300->fn[func].reg[MAXREGMASK & r], register_access,
 538                sizeof(struct offload_registers_access));
 539         vub300->fn[func].offload_count += 1;
 540         vub300->total_offload_count += 1;
 541 }
 542
 543 static void add_offloaded_reg(struct vub300_mmc_host *vub300,
 544                               struct offload_registers_access *register_access)
 545 {
 546         u32 Register = ((0x03 & register_access->command_byte[0]) << 15)
 547                         | ((0xFF & register_access->command_byte[1]) << 7)
 548                         | ((0xFE & register_access->command_byte[2]) >> 1);
 549         u8 func = ((0x70 & register_access->command_byte[0]) >> 4);
 550         u8 regs = vub300->dynamic_register_count;
 551         u8 i = 0;
 552         while (0 < regs-- && 1 == vub300->sdio_register[i].activate) {
 553                 if (vub300->sdio_register[i].func_num == func &&
 554                     vub300->sdio_register[i].sdio_reg == Register) {
 555                         if (vub300->sdio_register[i].prepared == 0)
 556                                 vub300->sdio_register[i].prepared = 1;
 557                         vub300->sdio_register[i].response =
 558                                 register_access->Respond_Byte[2];
 559                         vub300->sdio_register[i].regvalue =
 560                                 register_access->Respond_Byte[3];
 561                         return;
 562                 } else {
 563                         i += 1;
 564                         continue;
 565                 }
 566         };
 567         __add_offloaded_reg_to_fifo(vub300, register_access, func);
 568 }
 569
 570 static void check_vub300_port_status(struct vub300_mmc_host *vub300)
 571 {
 572         /*
 573          * cmd_mutex is held by vub300_pollwork_thread,
 574          * vub300_deadwork_thread or vub300_cmndwork_thread
 575          */
 576         int retval;
 577         retval =
 578                 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
 579                                 GET_SYSTEM_PORT_STATUS,
 580                                 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 581                                 0x0000, 0x0000, &vub300->system_port_status,
 582                                 sizeof(vub300->system_port_status), HZ);
 583         if (sizeof(vub300->system_port_status) == retval)
 584                 new_system_port_status(vub300);
 585 }
 586
 587 static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300)
 588 {
 589         /* cmd_mutex is held by vub300_pollwork_thread */
 590         if (vub300->command_res_urb->actual_length == 0)
 591                 return;
 592
 593         switch (vub300->resp.common.header_type) {
 594         case RESPONSE_INTERRUPT:
 595                 mutex_lock(&vub300->irq_mutex);
 596                 if (vub300->irq_enabled)
 597                         mmc_signal_sdio_irq(vub300->mmc);
 598                 else
 599                         vub300->irqs_queued += 1;
 600                 vub300->irq_disabled = 1;
 601                 mutex_unlock(&vub300->irq_mutex);
 602                 break;
 603         case RESPONSE_ERROR:
 604                 if (vub300->resp.error.error_code == SD_ERROR_NO_DEVICE)
 605                         check_vub300_port_status(vub300);
 606                 break;
 607         case RESPONSE_STATUS:
 608                 vub300->system_port_status = vub300->resp.status;
 609                 new_system_port_status(vub300);
 610                 if (!vub300->card_present)
 611                         vub300_queue_poll_work(vub300, HZ / 5);
 612                 break;
 613         case RESPONSE_IRQ_DISABLED:
 614         {
 615                 int offloaded_data_length = vub300->resp.common.header_size - 3;
 616                 int register_count = offloaded_data_length >> 3;
 617                 int ri = 0;
 618                 while (register_count--) {
 619                         add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]);
 620                         ri += 1;
 621                 }
 622                 mutex_lock(&vub300->irq_mutex);
 623                 if (vub300->irq_enabled)
 624                         mmc_signal_sdio_irq(vub300->mmc);
 625                 else
 626                         vub300->irqs_queued += 1;
 627                 vub300->irq_disabled = 1;
 628                 mutex_unlock(&vub300->irq_mutex);
 629                 break;
 630         }
 631         case RESPONSE_IRQ_ENABLED:
 632         {
 633                 int offloaded_data_length = vub300->resp.common.header_size - 3;
 634                 int register_count = offloaded_data_length >> 3;
 635                 int ri = 0;
 636                 while (register_count--) {
 637                         add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]);
 638                         ri += 1;
 639                 }
 640                 mutex_lock(&vub300->irq_mutex);
 641                 if (vub300->irq_enabled)
 642                         mmc_signal_sdio_irq(vub300->mmc);
 643                 else if (vub300->irqs_queued)
 644                         vub300->irqs_queued += 1;
 645                 else
 646                         vub300->irqs_queued += 1;
 647                 vub300->irq_disabled = 0;
 648                 mutex_unlock(&vub300->irq_mutex);
 649                 break;
 650         }
 651         case RESPONSE_NO_INTERRUPT:
 652                 vub300_queue_poll_work(vub300, 1);
 653                 break;
 654         default:
 655                 break;
 656         }
 657 }
 658
 659 static void __do_poll(struct vub300_mmc_host *vub300)
 660 {
 661         /* cmd_mutex is held by vub300_pollwork_thread */
 662         long commretval;
 663         mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 664         init_completion(&vub300->irqpoll_complete);
 665         send_irqpoll(vub300);
 666         commretval = wait_for_completion_timeout(&vub300->irqpoll_complete,
 667                                                  msecs_to_jiffies(500));
 668         if (vub300->usb_transport_fail) {
 669                 /* no need to do anything */
 670         } else if (commretval == 0) {
 671                 vub300->usb_timed_out = 1;
 672                 usb_kill_urb(vub300->command_out_urb);
 673                 usb_kill_urb(vub300->command_res_urb);
 674         } else if (commretval < 0) {
 675                 vub300_queue_poll_work(vub300, 1);
 676         } else { /* commretval > 0 */
 677                 __vub300_irqpoll_response(vub300);
 678         }
 679 }
 680
 681 /* this thread runs only when the driver
 682  * is trying to poll the device for an IRQ
 683  */
 684 static void vub300_pollwork_thread(struct work_struct *work)
 685 {                               /* NOT irq */
 686         struct vub300_mmc_host *vub300 = container_of(work,
 687                               struct vub300_mmc_host, pollwork.work);
 688         if (!vub300->interface) {
 689                 kref_put(&vub300->kref, vub300_delete);
 690                 return;
 691         }
 692         mutex_lock(&vub300->cmd_mutex);
 693         if (vub300->cmd) {
 694                 vub300_queue_poll_work(vub300, 1);
 695         } else if (!vub300->card_present) {
 696                 /* no need to do anything */
 697         } else { /* vub300->card_present */
 698                 mutex_lock(&vub300->irq_mutex);
 699                 if (!vub300->irq_enabled) {
 700                         mutex_unlock(&vub300->irq_mutex);
 701                 } else if (vub300->irqs_queued) {
 702                         vub300->irqs_queued -= 1;
 703                         mmc_signal_sdio_irq(vub300->mmc);
 704                         mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 705                         mutex_unlock(&vub300->irq_mutex);
 706                 } else { /* NOT vub300->irqs_queued */
 707                         mutex_unlock(&vub300->irq_mutex);
 708                         __do_poll(vub300);
 709                 }
 710         }
 711         mutex_unlock(&vub300->cmd_mutex);
 712         kref_put(&vub300->kref, vub300_delete);
 713 }
 714
 715 static void vub300_deadwork_thread(struct work_struct *work)
 716 {                               /* NOT irq */
 717         struct vub300_mmc_host *vub300 =
 718                 container_of(work, struct vub300_mmc_host, deadwork);
 719         if (!vub300->interface) {
 720                 kref_put(&vub300->kref, vub300_delete);
 721                 return;
 722         }
 723         mutex_lock(&vub300->cmd_mutex);
 724         if (vub300->cmd) {
 725                 /*
 726                  * a command got in as the inactivity
 727                  * timer expired - so we just let the
 728                  * processing of the command show if
 729                  * the device is dead
 730                  */
 731         } else if (vub300->card_present) {
 732                 check_vub300_port_status(vub300);
 733         } else if (vub300->mmc && vub300->mmc->card &&
 734                    mmc_card_present(vub300->mmc->card)) {
 735                 /*
 736                  * the MMC core must not have responded
 737                  * to the previous indication - lets
 738                  * hope that it eventually does so we
 739                  * will just ignore this for now
 740                  */
 741         } else {
 742                 check_vub300_port_status(vub300);
 743         }
 744         mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 745         mutex_unlock(&vub300->cmd_mutex);
 746         kref_put(&vub300->kref, vub300_delete);
 747 }
 748
 749 static void vub300_inactivity_timer_expired(unsigned long data)
 750 {                               /* softirq */
 751         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data;
 752         if (!vub300->interface) {
 753                 kref_put(&vub300->kref, vub300_delete);
 754         } else if (vub300->cmd) {
 755                 mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 756         } else {
 757                 vub300_queue_dead_work(vub300);
 758                 mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 759         }
 760 }
 761
 762 static int vub300_response_error(u8 error_code)
 763 {
 764         switch (error_code) {
 765         case SD_ERROR_PIO_TIMEOUT:
 766         case SD_ERROR_1BIT_TIMEOUT:
 767         case SD_ERROR_4BIT_TIMEOUT:
 768                 return -ETIMEDOUT;
 769         case SD_ERROR_STAT_DATA:
 770         case SD_ERROR_OVERRUN:
 771         case SD_ERROR_STAT_CMD:
 772         case SD_ERROR_STAT_CMD_TIMEOUT:
 773         case SD_ERROR_SDCRDY_STUCK:
 774         case SD_ERROR_UNHANDLED:
 775         case SD_ERROR_1BIT_CRC_WRONG:
 776         case SD_ERROR_4BIT_CRC_WRONG:
 777         case SD_ERROR_1BIT_CRC_ERROR:
 778         case SD_ERROR_4BIT_CRC_ERROR:
 779         case SD_ERROR_NO_CMD_ENDBIT:
 780         case SD_ERROR_NO_1BIT_DATEND:
 781         case SD_ERROR_NO_4BIT_DATEND:
 782         case SD_ERROR_1BIT_DATA_TIMEOUT:
 783         case SD_ERROR_4BIT_DATA_TIMEOUT:
 784         case SD_ERROR_1BIT_UNEXPECTED_TIMEOUT:
 785         case SD_ERROR_4BIT_UNEXPECTED_TIMEOUT:
 786                 return -EILSEQ;
 787         case 33:
 788                 return -EILSEQ;
 789         case SD_ERROR_ILLEGAL_COMMAND:
 790                 return -EINVAL;
 791         case SD_ERROR_NO_DEVICE:
 792                 return -ENOMEDIUM;
 793         default:
 794                 return -ENODEV;
 795         }
 796 }
 797
 798 static void command_res_completed(struct urb *urb)
 799 {                               /* urb completion handler - hardirq */
 800         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
 801         if (urb->status) {
 802                 /* we have to let the initiator handle the error */
 803         } else if (vub300->command_res_urb->actual_length == 0) {
 804                 /*
 805                  * we have seen this happen once or twice and
 806                  * we suspect a buggy USB host controller
 807                  */
 808         } else if (!vub300->data) {
 809                 /* this means that the command (typically CMD52) succeeded */
 810         } else if (vub300->resp.common.header_type != 0x02) {
 811                 /*
 812                  * this is an error response from the VUB300 chip
 813                  * and we let the initiator handle it
 814                  */
 815         } else if (vub300->urb) {
 816                 vub300->cmd->error =
 817                         vub300_response_error(vub300->resp.error.error_code);
 818                 usb_unlink_urb(vub300->urb);
 819         } else {
 820                 vub300->cmd->error =
 821                         vub300_response_error(vub300->resp.error.error_code);
 822                 usb_sg_cancel(&vub300->sg_request);
 823         }
 824         complete(&vub300->command_complete);    /* got_response_in */
 825 }
 826
 827 static void command_out_completed(struct urb *urb)
 828 {                               /* urb completion handler - hardirq */
 829         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context;
 830         if (urb->status) {
 831                 complete(&vub300->command_complete);
 832         } else {
 833                 int ret;
 834                 unsigned int pipe =
 835                         usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep);
 836                 usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe,
 837                                   &vub300->resp, sizeof(vub300->resp),
 838                                   command_res_completed, vub300);
 839                 vub300->command_res_urb->actual_length = 0;
 840                 ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC);
 841                 if (ret == 0) {
 842                         /*
 843                          * the urb completion handler will call
 844                          * our completion handler
 845                          */
 846                 } else {
 847                         /*
 848                          * and thus we only call it directly
 849                          * when it will not be called
 850                          */
 851                         complete(&vub300->command_complete);
 852                 }
 853         }
 854 }
 855
 856 /*
 857  * the STUFF bits are masked out for the comparisons
 858  */
 859 static void snoop_block_size_and_bus_width(struct vub300_mmc_host *vub300,
 860                                            u32 cmd_arg)
 861 {
 862         if ((0xFBFFFE00 & cmd_arg) == 0x80022200)
 863                 vub300->fbs[1] = (cmd_arg << 8) | (0x00FF & vub300->fbs[1]);
 864         else if ((0xFBFFFE00 & cmd_arg) == 0x80022000)
 865                 vub300->fbs[1] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[1]);
 866         else if ((0xFBFFFE00 & cmd_arg) == 0x80042200)
 867                 vub300->fbs[2] = (cmd_arg << 8) | (0x00FF & vub300->fbs[2]);
 868         else if ((0xFBFFFE00 & cmd_arg) == 0x80042000)
 869                 vub300->fbs[2] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[2]);
 870         else if ((0xFBFFFE00 & cmd_arg) == 0x80062200)
 871                 vub300->fbs[3] = (cmd_arg << 8) | (0x00FF & vub300->fbs[3]);
 872         else if ((0xFBFFFE00 & cmd_arg) == 0x80062000)
 873                 vub300->fbs[3] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[3]);
 874         else if ((0xFBFFFE00 & cmd_arg) == 0x80082200)
 875                 vub300->fbs[4] = (cmd_arg << 8) | (0x00FF & vub300->fbs[4]);
 876         else if ((0xFBFFFE00 & cmd_arg) == 0x80082000)
 877                 vub300->fbs[4] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[4]);
 878         else if ((0xFBFFFE00 & cmd_arg) == 0x800A2200)
 879                 vub300->fbs[5] = (cmd_arg << 8) | (0x00FF & vub300->fbs[5]);
 880         else if ((0xFBFFFE00 & cmd_arg) == 0x800A2000)
 881                 vub300->fbs[5] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[5]);
 882         else if ((0xFBFFFE00 & cmd_arg) == 0x800C2200)
 883                 vub300->fbs[6] = (cmd_arg << 8) | (0x00FF & vub300->fbs[6]);
 884         else if ((0xFBFFFE00 & cmd_arg) == 0x800C2000)
 885                 vub300->fbs[6] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[6]);
 886         else if ((0xFBFFFE00 & cmd_arg) == 0x800E2200)
 887                 vub300->fbs[7] = (cmd_arg << 8) | (0x00FF & vub300->fbs[7]);
 888         else if ((0xFBFFFE00 & cmd_arg) == 0x800E2000)
 889                 vub300->fbs[7] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[7]);
 890         else if ((0xFBFFFE03 & cmd_arg) == 0x80000E00)
 891                 vub300->bus_width = 1;
 892         else if ((0xFBFFFE03 & cmd_arg) == 0x80000E02)
 893                 vub300->bus_width = 4;
 894 }
 895
 896 static void send_command(struct vub300_mmc_host *vub300)
 897 {
 898         /* cmd_mutex is held by vub300_cmndwork_thread */
 899         struct mmc_command *cmd = vub300->cmd;
 900         struct mmc_data *data = vub300->data;
 901         int retval;
 902         int i;
 903         u8 response_type;
 904         if (vub300->app_spec) {
 905                 switch (cmd->opcode) {
 906                 case 6:
 907                         response_type = SDRT_1;
 908                         vub300->resp_len = 6;
 909                         if (0x00000000 == (0x00000003 & cmd->arg))
 910                                 vub300->bus_width = 1;
 911                         else if (0x00000002 == (0x00000003 & cmd->arg))
 912                                 vub300->bus_width = 4;
 913                         else
 914                                 dev_err(&vub300->udev->dev,
 915                                         "unexpected ACMD6 bus_width=%d\n",
 916                                         0x00000003 & cmd->arg);
 917                         break;
 918                 case 13:
 919                         response_type = SDRT_1;
 920                         vub300->resp_len = 6;
 921                         break;
 922                 case 22:
 923                         response_type = SDRT_1;
 924                         vub300->resp_len = 6;
 925                         break;
 926                 case 23:
 927                         response_type = SDRT_1;
 928                         vub300->resp_len = 6;
 929                         break;
 930                 case 41:
 931                         response_type = SDRT_3;
 932                         vub300->resp_len = 6;
 933                         break;
 934                 case 42:
 935                         response_type = SDRT_1;
 936                         vub300->resp_len = 6;
 937                         break;
 938                 case 51:
 939                         response_type = SDRT_1;
 940                         vub300->resp_len = 6;
 941                         break;
 942                 case 55:
 943                         response_type = SDRT_1;
 944                         vub300->resp_len = 6;
 945                         break;
 946                 default:
 947                         vub300->resp_len = 0;
 948                         cmd->error = -EINVAL;
 949                         complete(&vub300->command_complete);
 950                         return;
 951                 }
 952                 vub300->app_spec = 0;
 953         } else {
 954                 switch (cmd->opcode) {
 955                 case 0:
 956                         response_type = SDRT_NONE;
 957                         vub300->resp_len = 0;
 958                         break;
 959                 case 1:
 960                         response_type = SDRT_3;
 961                         vub300->resp_len = 6;
 962                         break;
 963                 case 2:
 964                         response_type = SDRT_2;
 965                         vub300->resp_len = 17;
 966                         break;
 967                 case 3:
 968                         response_type = SDRT_6;
 969                         vub300->resp_len = 6;
 970                         break;
 971                 case 4:
 972                         response_type = SDRT_NONE;
 973                         vub300->resp_len = 0;
 974                         break;
 975                 case 5:
 976                         response_type = SDRT_4;
 977                         vub300->resp_len = 6;
 978                         break;
 979                 case 6:
 980                         response_type = SDRT_1;
 981                         vub300->resp_len = 6;
 982                         break;
 983                 case 7:
 984                         response_type = SDRT_1B;
 985                         vub300->resp_len = 6;
 986                         break;
 987                 case 8:
 988                         response_type = SDRT_7;
 989                         vub300->resp_len = 6;
 990                         break;
 991                 case 9:
 992                         response_type = SDRT_2;
 993                         vub300->resp_len = 17;
 994                         break;
 995                 case 10:
 996                         response_type = SDRT_2;
 997                         vub300->resp_len = 17;
 998                         break;
 999                 case 12:
1000                         response_type = SDRT_1B;
1001                         vub300->resp_len = 6;
1002                         break;
1003                 case 13:
1004                         response_type = SDRT_1;
1005                         vub300->resp_len = 6;
1006                         break;
1007                 case 15:
1008                         response_type = SDRT_NONE;
1009                         vub300->resp_len = 0;
1010                         break;
1011                 case 16:
1012                         for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
1013                                 vub300->fbs[i] = 0xFFFF & cmd->arg;
1014                         response_type = SDRT_1;
1015                         vub300->resp_len = 6;
1016                         break;
1017                 case 17:
1018                 case 18:
1019                 case 24:
1020                 case 25:
1021                 case 27:
1022                         response_type = SDRT_1;
1023                         vub300->resp_len = 6;
1024                         break;
1025                 case 28:
1026                 case 29:
1027                         response_type = SDRT_1B;
1028                         vub300->resp_len = 6;
1029                         break;
1030                 case 30:
1031                 case 32:
1032                 case 33:
1033                         response_type = SDRT_1;
1034                         vub300->resp_len = 6;
1035                         break;
1036                 case 38:
1037                         response_type = SDRT_1B;
1038                         vub300->resp_len = 6;
1039                         break;
1040                 case 42:
1041                         response_type = SDRT_1;
1042                         vub300->resp_len = 6;
1043                         break;
1044                 case 52:
1045                         response_type = SDRT_5;
1046                         vub300->resp_len = 6;
1047                         snoop_block_size_and_bus_width(vub300, cmd->arg);
1048                         break;
1049                 case 53:
1050                         response_type = SDRT_5;
1051                         vub300->resp_len = 6;
1052                         break;
1053                 case 55:
1054                         response_type = SDRT_1;
1055                         vub300->resp_len = 6;
1056                         vub300->app_spec = 1;
1057                         break;
1058                 case 56:
1059                         response_type = SDRT_1;
1060                         vub300->resp_len = 6;
1061                         break;
1062                 default:
1063                         vub300->resp_len = 0;
1064                         cmd->error = -EINVAL;
1065                         complete(&vub300->command_complete);
1066                         return;
1067                 }
1068         }
1069         /*
1070          * it is a shame that we can not use "sizeof(struct sd_command_header)"
1071          * this is because the packet _must_ be padded to 64 bytes
1072          */
1073         vub300->cmnd.head.header_size = 20;
1074         vub300->cmnd.head.header_type = 0x00;
1075         vub300->cmnd.head.port_number = 0; /* "0" means port 1 */
1076         vub300->cmnd.head.command_type = 0x00; /* standard read command */
1077         vub300->cmnd.head.response_type = response_type;
1078         vub300->cmnd.head.command_index = cmd->opcode;
1079         vub300->cmnd.head.arguments[0] = cmd->arg >> 24;
1080         vub300->cmnd.head.arguments[1] = cmd->arg >> 16;
1081         vub300->cmnd.head.arguments[2] = cmd->arg >> 8;
1082         vub300->cmnd.head.arguments[3] = cmd->arg >> 0;
1083         if (cmd->opcode == 52) {
1084                 int fn = 0x7 & (cmd->arg >> 28);
1085                 vub300->cmnd.head.block_count[0] = 0;
1086                 vub300->cmnd.head.block_count[1] = 0;
1087                 vub300->cmnd.head.block_size[0] = (vub300->fbs[fn] >> 8) & 0xFF;
1088                 vub300->cmnd.head.block_size[1] = (vub300->fbs[fn] >> 0) & 0xFF;
1089                 vub300->cmnd.head.command_type = 0x00;
1090                 vub300->cmnd.head.transfer_size[0] = 0;
1091                 vub300->cmnd.head.transfer_size[1] = 0;
1092                 vub300->cmnd.head.transfer_size[2] = 0;
1093                 vub300->cmnd.head.transfer_size[3] = 0;
1094         } else if (!data) {
1095                 vub300->cmnd.head.block_count[0] = 0;
1096                 vub300->cmnd.head.block_count[1] = 0;
1097                 vub300->cmnd.head.block_size[0] = (vub300->fbs[0] >> 8) & 0xFF;
1098                 vub300->cmnd.head.block_size[1] = (vub300->fbs[0] >> 0) & 0xFF;
1099                 vub300->cmnd.head.command_type = 0x00;
1100                 vub300->cmnd.head.transfer_size[0] = 0;
1101                 vub300->cmnd.head.transfer_size[1] = 0;
1102                 vub300->cmnd.head.transfer_size[2] = 0;
1103                 vub300->cmnd.head.transfer_size[3] = 0;
1104         } else if (cmd->opcode == 53) {
1105                 int fn = 0x7 & (cmd->arg >> 28);
1106                 if (0x08 & vub300->cmnd.head.arguments[0]) { /* BLOCK MODE */
1107                         vub300->cmnd.head.block_count[0] =
1108                                 (data->blocks >> 8) & 0xFF;
1109                         vub300->cmnd.head.block_count[1] =
1110                                 (data->blocks >> 0) & 0xFF;
1111                         vub300->cmnd.head.block_size[0] =
1112                                 (data->blksz >> 8) & 0xFF;
1113                         vub300->cmnd.head.block_size[1] =
1114                                 (data->blksz >> 0) & 0xFF;
1115                 } else {        /* BYTE MODE */
1116                         vub300->cmnd.head.block_count[0] = 0;
1117                         vub300->cmnd.head.block_count[1] = 0;
1118                         vub300->cmnd.head.block_size[0] =
1119                                 (vub300->datasize >> 8) & 0xFF;
1120                         vub300->cmnd.head.block_size[1] =
1121                                 (vub300->datasize >> 0) & 0xFF;
1122                 }
1123                 vub300->cmnd.head.command_type =
1124                         (MMC_DATA_READ & data->flags) ? 0x00 : 0x80;
1125                 vub300->cmnd.head.transfer_size[0] =
1126                         (vub300->datasize >> 24) & 0xFF;
1127                 vub300->cmnd.head.transfer_size[1] =
1128                         (vub300->datasize >> 16) & 0xFF;
1129                 vub300->cmnd.head.transfer_size[2] =
1130                         (vub300->datasize >> 8) & 0xFF;
1131                 vub300->cmnd.head.transfer_size[3] =
1132                         (vub300->datasize >> 0) & 0xFF;
1133                 if (vub300->datasize < vub300->fbs[fn]) {
1134                         vub300->cmnd.head.block_count[0] = 0;
1135                         vub300->cmnd.head.block_count[1] = 0;
1136                 }
1137         } else {
1138                 vub300->cmnd.head.block_count[0] = (data->blocks >> 8) & 0xFF;
1139                 vub300->cmnd.head.block_count[1] = (data->blocks >> 0) & 0xFF;
1140                 vub300->cmnd.head.block_size[0] = (data->blksz >> 8) & 0xFF;
1141                 vub300->cmnd.head.block_size[1] = (data->blksz >> 0) & 0xFF;
1142                 vub300->cmnd.head.command_type =
1143                         (MMC_DATA_READ & data->flags) ? 0x00 : 0x80;
1144                 vub300->cmnd.head.transfer_size[0] =
1145                         (vub300->datasize >> 24) & 0xFF;
1146                 vub300->cmnd.head.transfer_size[1] =
1147                         (vub300->datasize >> 16) & 0xFF;
1148                 vub300->cmnd.head.transfer_size[2] =
1149                         (vub300->datasize >> 8) & 0xFF;
1150                 vub300->cmnd.head.transfer_size[3] =
1151                         (vub300->datasize >> 0) & 0xFF;
1152                 if (vub300->datasize < vub300->fbs[0]) {
1153                         vub300->cmnd.head.block_count[0] = 0;
1154                         vub300->cmnd.head.block_count[1] = 0;
1155                 }
1156         }
1157         if (vub300->cmnd.head.block_size[0] || vub300->cmnd.head.block_size[1]) {
1158                 u16 block_size = vub300->cmnd.head.block_size[1] |
1159                         (vub300->cmnd.head.block_size[0] << 8);
1160                 u16 block_boundary = FIRMWARE_BLOCK_BOUNDARY -
1161                         (FIRMWARE_BLOCK_BOUNDARY % block_size);
1162                 vub300->cmnd.head.block_boundary[0] =
1163                         (block_boundary >> 8) & 0xFF;
1164                 vub300->cmnd.head.block_boundary[1] =
1165                         (block_boundary >> 0) & 0xFF;
1166         } else {
1167                 vub300->cmnd.head.block_boundary[0] = 0;
1168                 vub300->cmnd.head.block_boundary[1] = 0;
1169         }
1170         usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev,
1171                           usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep),
1172                           &vub300->cmnd, sizeof(vub300->cmnd),
1173                           command_out_completed, vub300);
1174         retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL);
1175         if (retval < 0) {
1176                 cmd->error = retval;
1177                 complete(&vub300->command_complete);
1178                 return;
1179         } else {
1180                 return;
1181         }
1182 }
1183
1184 /*
1185  * timer callback runs in atomic mode
1186  *       so it cannot call usb_kill_urb()
1187  */
1188 static void vub300_sg_timed_out(unsigned long data)
1189 {
1190         struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data;
1191         vub300->usb_timed_out = 1;
1192         usb_sg_cancel(&vub300->sg_request);
1193         usb_unlink_urb(vub300->command_out_urb);
1194         usb_unlink_urb(vub300->command_res_urb);
1195 }
1196
1197 static u16 roundup_to_multiple_of_64(u16 number)
1198 {
1199         return 0xFFC0 & (0x3F + number);
1200 }
1201
1202 /*
1203  * this is a separate function to solve the 80 column width restriction
1204  */
1205 static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
1206                                           const struct firmware *fw)
1207 {
1208         u8 register_count = 0;
1209         u16 ts = 0;
1210         u16 interrupt_size = 0;
1211         const u8 *data = fw->data;
1212         int size = fw->size;
1213         u8 c;
1214         dev_info(&vub300->udev->dev, "using %s for SDIO offload processing\n",
1215                  vub300->vub_name);
1216         do {
1217                 c = *data++;
1218         } while (size-- && c); /* skip comment */
1219         dev_info(&vub300->udev->dev, "using offload firmware %s %s\n", fw->data,
1220                  vub300->vub_name);
1221         if (size < 4) {
1222                 dev_err(&vub300->udev->dev,
1223                         "corrupt offload pseudocode in firmware %s\n",
1224                         vub300->vub_name);
1225                 strncpy(vub300->vub_name, "corrupt offload pseudocode",
1226                         sizeof(vub300->vub_name));
1227                 return;
1228         }
1229         interrupt_size += *data++;
1230         size -= 1;
1231         interrupt_size <<= 8;
1232         interrupt_size += *data++;
1233         size -= 1;
1234         if (interrupt_size < size) {
1235                 u16 xfer_length = roundup_to_multiple_of_64(interrupt_size);
1236                 u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL);
1237                 if (xfer_buffer) {
1238                         int retval;
1239                         memcpy(xfer_buffer, data, interrupt_size);
1240                         memset(xfer_buffer + interrupt_size, 0,
1241                                xfer_length - interrupt_size);
1242                         size -= interrupt_size;
1243                         data += interrupt_size;
1244                         retval =
1245                                 usb_control_msg(vub300->udev,
1246                                                 usb_sndctrlpipe(vub300->udev, 0),
1247                                                 SET_INTERRUPT_PSEUDOCODE,
1248                                                 USB_DIR_OUT | USB_TYPE_VENDOR |
1249                                                 USB_RECIP_DEVICE, 0x0000, 0x0000,
1250                                                 xfer_buffer, xfer_length, HZ);
1251                         kfree(xfer_buffer);
1252                         if (retval < 0) {
1253                                 strncpy(vub300->vub_name,
1254                                         "SDIO pseudocode download failed",
1255                                         sizeof(vub300->vub_name));
1256                                 return;
1257                         }
1258                 } else {
1259                         dev_err(&vub300->udev->dev,
1260                                 "not enough memory for xfer buffer to send"
1261                                 " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
1262                                 vub300->vub_name);
1263                         strncpy(vub300->vub_name,
1264                                 "SDIO interrupt pseudocode download failed",
1265                                 sizeof(vub300->vub_name));
1266                         return;
1267                 }
1268         } else {
1269                 dev_err(&vub300->udev->dev,
1270                         "corrupt interrupt pseudocode in firmware %s %s\n",
1271                         fw->data, vub300->vub_name);
1272                 strncpy(vub300->vub_name, "corrupt interrupt pseudocode",
1273                         sizeof(vub300->vub_name));
1274                 return;
1275         }
1276         ts += *data++;
1277         size -= 1;
1278         ts <<= 8;
1279         ts += *data++;
1280         size -= 1;
1281         if (ts < size) {
1282                 u16 xfer_length = roundup_to_multiple_of_64(ts);
1283                 u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL);
1284                 if (xfer_buffer) {
1285                         int retval;
1286                         memcpy(xfer_buffer, data, ts);
1287                         memset(xfer_buffer + ts, 0,
1288                                xfer_length - ts);
1289                         size -= ts;
1290                         data += ts;
1291                         retval =
1292                                 usb_control_msg(vub300->udev,
1293                                                 usb_sndctrlpipe(vub300->udev, 0),
1294                                                 SET_TRANSFER_PSEUDOCODE,
1295                                                 USB_DIR_OUT | USB_TYPE_VENDOR |
1296                                                 USB_RECIP_DEVICE, 0x0000, 0x0000,
1297                                                 xfer_buffer, xfer_length, HZ);
1298                         kfree(xfer_buffer);
1299                         if (retval < 0) {
1300                                 strncpy(vub300->vub_name,
1301                                         "SDIO pseudocode download failed",
1302                                         sizeof(vub300->vub_name));
1303                                 return;
1304                         }
1305                 } else {
1306                         dev_err(&vub300->udev->dev,
1307                                 "not enough memory for xfer buffer to send"
1308                                 " TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
1309                                 vub300->vub_name);
1310                         strncpy(vub300->vub_name,
1311                                 "SDIO transfer pseudocode download failed",
1312                                 sizeof(vub300->vub_name));
1313                         return;
1314                 }
1315         } else {
1316                 dev_err(&vub300->udev->dev,
1317                         "corrupt transfer pseudocode in firmware %s %s\n",
1318                         fw->data, vub300->vub_name);
1319                 strncpy(vub300->vub_name, "corrupt transfer pseudocode",
1320                         sizeof(vub300->vub_name));
1321                 return;
1322         }
1323         register_count += *data++;
1324         size -= 1;
1325         if (register_count * 4 == size) {
1326                 int I = vub300->dynamic_register_count = register_count;
1327                 int i = 0;
1328                 while (I--) {
1329                         unsigned int func_num = 0;
1330                         vub300->sdio_register[i].func_num = *data++;
1331                         size -= 1;
1332                         func_num += *data++;
1333                         size -= 1;
1334                         func_num <<= 8;
1335                         func_num += *data++;
1336                         size -= 1;
1337                         func_num <<= 8;
1338                         func_num += *data++;
1339                         size -= 1;
1340                         vub300->sdio_register[i].sdio_reg = func_num;
1341                         vub300->sdio_register[i].activate = 1;
1342                         vub300->sdio_register[i].prepared = 0;
1343                         i += 1;
1344                 }
1345                 dev_info(&vub300->udev->dev,
1346                          "initialized %d dynamic pseudocode registers\n",
1347                          vub300->dynamic_register_count);
1348                 return;
1349         } else {
1350                 dev_err(&vub300->udev->dev,
1351                         "corrupt dynamic registers in firmware %s\n",
1352                         vub300->vub_name);
1353                 strncpy(vub300->vub_name, "corrupt dynamic registers",
1354                         sizeof(vub300->vub_name));
1355                 return;
1356         }
1357 }
1358
1359 /*
1360  * if the binary containing the EMPTY PseudoCode can not be found
1361  * vub300->vub_name is set anyway in order to prevent an automatic retry
1362  */
1363 static void download_offload_pseudocode(struct vub300_mmc_host *vub300)
1364 {
1365         struct mmc_card *card = vub300->mmc->card;
1366         int sdio_funcs = card->sdio_funcs;
1367         const struct firmware *fw = NULL;
1368         int l = snprintf(vub300->vub_name, sizeof(vub300->vub_name),
1369                          "vub_%04X%04X", card->cis.vendor, card->cis.device);
1370         int n = 0;
1371         int retval;
1372         for (n = 0; n < sdio_funcs; n++) {
1373                 struct sdio_func *sf = card->sdio_func[n];
1374                 l += snprintf(vub300->vub_name + l,
1375                               sizeof(vub300->vub_name) - l, "_%04X%04X",
1376                               sf->vendor, sf->device);
1377         };
1378         snprintf(vub300->vub_name + l, sizeof(vub300->vub_name) - l, ".bin");
1379         dev_info(&vub300->udev->dev, "requesting offload firmware %s\n",
1380                  vub300->vub_name);
1381         retval = request_firmware(&fw, vub300->vub_name, &card->dev);
1382         if (retval < 0) {
1383                 strncpy(vub300->vub_name, "vub_default.bin",
1384                         sizeof(vub300->vub_name));
1385                 retval = request_firmware(&fw, vub300->vub_name, &card->dev);
1386                 if (retval < 0) {
1387                         strncpy(vub300->vub_name,
1388                                 "no SDIO offload firmware found",
1389                                 sizeof(vub300->vub_name));
1390                 } else {
1391                         __download_offload_pseudocode(vub300, fw);
1392                         release_firmware(fw);
1393                 }
1394         } else {
1395                 __download_offload_pseudocode(vub300, fw);
1396                 release_firmware(fw);
1397         }
1398 }
1399
1400 static void vub300_usb_bulk_msg_completion(struct urb *urb)
1401 {                               /* urb completion handler - hardirq */
1402         complete((struct completion *)urb->context);
1403 }
1404
1405 static int vub300_usb_bulk_msg(struct vub300_mmc_host *vub300,
1406                                unsigned int pipe, void *data, int len,
1407                                int *actual_length, int timeout_msecs)
1408 {
1409         /* cmd_mutex is held by vub300_cmndwork_thread */
1410         struct usb_device *usb_dev = vub300->udev;
1411         struct completion done;
1412         int retval;
1413         vub300->urb = usb_alloc_urb(0, GFP_KERNEL);
1414         if (!vub300->urb)
1415                 return -ENOMEM;
1416         usb_fill_bulk_urb(vub300->urb, usb_dev, pipe, data, len,
1417                           vub300_usb_bulk_msg_completion, NULL);
1418         init_completion(&done);
1419         vub300->urb->context = &done;
1420         vub300->urb->actual_length = 0;
1421         retval = usb_submit_urb(vub300->urb, GFP_KERNEL);
1422         if (unlikely(retval))
1423                 goto out;
1424         if (!wait_for_completion_timeout
1425             (&done, msecs_to_jiffies(timeout_msecs))) {
1426                 retval = -ETIMEDOUT;
1427                 usb_kill_urb(vub300->urb);
1428         } else {
1429                 retval = vub300->urb->status;
1430         }
1431 out:
1432         *actual_length = vub300->urb->actual_length;
1433         usb_free_urb(vub300->urb);
1434         vub300->urb = NULL;
1435         return retval;
1436 }
1437
1438 static int __command_read_data(struct vub300_mmc_host *vub300,
1439                                struct mmc_command *cmd, struct mmc_data *data)
1440 {
1441         /* cmd_mutex is held by vub300_cmndwork_thread */
1442         int linear_length = vub300->datasize;
1443         int padded_length = vub300->large_usb_packets ?
1444                 ((511 + linear_length) >> 9) << 9 :
1445                 ((63 + linear_length) >> 6) << 6;
1446         if ((padded_length == linear_length) || !pad_input_to_usb_pkt) {
1447                 int result;
1448                 unsigned pipe;
1449                 pipe = usb_rcvbulkpipe(vub300->udev, vub300->data_inp_ep);
1450                 result = usb_sg_init(&vub300->sg_request, vub300->udev,
1451                                      pipe, 0, data->sg,
1452                                      data->sg_len, 0, GFP_KERNEL);
1453                 if (result < 0) {
1454                         usb_unlink_urb(vub300->command_out_urb);
1455                         usb_unlink_urb(vub300->command_res_urb);
1456                         cmd->error = result;
1457                         data->bytes_xfered = 0;
1458                         return 0;
1459                 } else {
1460                         vub300->sg_transfer_timer.expires =
1461                                 jiffies + msecs_to_jiffies(2000 +
1462                                                   (linear_length / 16384));
1463                         add_timer(&vub300->sg_transfer_timer);
1464                         usb_sg_wait(&vub300->sg_request);
1465                         del_timer(&vub300->sg_transfer_timer);
1466                         if (vub300->sg_request.status < 0) {
1467                                 cmd->error = vub300->sg_request.status;
1468                                 data->bytes_xfered = 0;
1469                                 return 0;
1470                         } else {
1471                                 data->bytes_xfered = vub300->datasize;
1472                                 return linear_length;
1473                         }
1474                 }
1475         } else {
1476                 u8 *buf = kmalloc(padded_length, GFP_KERNEL);
1477                 if (buf) {
1478                         int result;
1479                         unsigned pipe = usb_rcvbulkpipe(vub300->udev,
1480                                                         vub300->data_inp_ep);
1481                         int actual_length = 0;
1482                         result = vub300_usb_bulk_msg(vub300, pipe, buf,
1483                                              padded_length, &actual_length,
1484                                              2000 + (padded_length / 16384));
1485                         if (result < 0) {
1486                                 cmd->error = result;
1487                                 data->bytes_xfered = 0;
1488                                 kfree(buf);
1489                                 return 0;
1490                         } else if (actual_length < linear_length) {
1491                                 cmd->error = -EREMOTEIO;
1492                                 data->bytes_xfered = 0;
1493                                 kfree(buf);
1494                                 return 0;
1495                         } else {
1496                                 sg_copy_from_buffer(data->sg, data->sg_len, buf,
1497                                                     linear_length);
1498                                 kfree(buf);
1499                                 data->bytes_xfered = vub300->datasize;
1500                                 return linear_length;
1501                         }
1502                 } else {
1503                         cmd->error = -ENOMEM;
1504                         data->bytes_xfered = 0;
1505                         return 0;
1506                 }
1507         }
1508 }
1509
1510 static int __command_write_data(struct vub300_mmc_host *vub300,
1511                                 struct mmc_command *cmd, struct mmc_data *data)
1512 {
1513         /* cmd_mutex is held by vub300_cmndwork_thread */
1514         unsigned pipe = usb_sndbulkpipe(vub300->udev, vub300->data_out_ep);
1515         int linear_length = vub300->datasize;
1516         int modulo_64_length = linear_length & 0x003F;
1517         int modulo_512_length = linear_length & 0x01FF;
1518         if (linear_length < 64) {
1519                 int result;
1520                 int actual_length;
1521                 sg_copy_to_buffer(data->sg, data->sg_len,
1522                                   vub300->padded_buffer,
1523                                   sizeof(vub300->padded_buffer));
1524                 memset(vub300->padded_buffer + linear_length, 0,
1525                        sizeof(vub300->padded_buffer) - linear_length);
1526                 result = vub300_usb_bulk_msg(vub300, pipe, vub300->padded_buffer,
1527                                              sizeof(vub300->padded_buffer),
1528                                              &actual_length, 2000 +
1529                                              (sizeof(vub300->padded_buffer) /
1530                                               16384));
1531                 if (result < 0) {
1532                         cmd->error = result;
1533                         data->bytes_xfered = 0;
1534                 } else {
1535                         data->bytes_xfered = vub300->datasize;
1536                 }
1537         } else if ((!vub300->large_usb_packets && (0 < modulo_64_length)) ||
1538                     (vub300->large_usb_packets && (64 > modulo_512_length))
1539                 ) {             /* don't you just love these work-rounds */
1540                 int padded_length = ((63 + linear_length) >> 6) << 6;
1541                 u8 *buf = kmalloc(padded_length, GFP_KERNEL);
1542                 if (buf) {
1543                         int result;
1544                         int actual_length;
1545                         sg_copy_to_buffer(data->sg, data->sg_len, buf,
1546                                           padded_length);
1547                         memset(buf + linear_length, 0,
1548                                padded_length - linear_length);
1549                         result =
1550                                 vub300_usb_bulk_msg(vub300, pipe, buf,
1551                                                     padded_length, &actual_length,
1552                                                     2000 + padded_length / 16384);
1553                         kfree(buf);
1554                         if (result < 0) {
1555                                 cmd->error = result;
1556                                 data->bytes_xfered = 0;
1557                         } else {
1558                                 data->bytes_xfered = vub300->datasize;
1559                         }
1560                 } else {
1561                         cmd->error = -ENOMEM;
1562                         data->bytes_xfered = 0;
1563                 }
1564         } else {                /* no data padding required */
1565                 int result;
1566                 unsigned char buf[64 * 4];
1567                 sg_copy_to_buffer(data->sg, data->sg_len, buf, sizeof(buf));
1568                 result = usb_sg_init(&vub300->sg_request, vub300->udev,
1569                                      pipe, 0, data->sg,
1570                                      data->sg_len, 0, GFP_KERNEL);
1571                 if (result < 0) {
1572                         usb_unlink_urb(vub300->command_out_urb);
1573                         usb_unlink_urb(vub300->command_res_urb);
1574                         cmd->error = result;
1575                         data->bytes_xfered = 0;
1576                 } else {
1577                         vub300->sg_transfer_timer.expires =
1578                                 jiffies + msecs_to_jiffies(2000 +
1579                                                            linear_length / 16384);
1580                         add_timer(&vub300->sg_transfer_timer);
1581                         usb_sg_wait(&vub300->sg_request);
1582                         if (cmd->error) {
1583                                 data->bytes_xfered = 0;
1584                         } else {
1585                                 del_timer(&vub300->sg_transfer_timer);
1586                                 if (vub300->sg_request.status < 0) {
1587                                         cmd->error = vub300->sg_request.status;
1588                                         data->bytes_xfered = 0;
1589                                 } else {
1590                                         data->bytes_xfered = vub300->datasize;
1591                                 }
1592                         }
1593                 }
1594         }
1595         return linear_length;
1596 }
1597
1598 static void __vub300_command_response(struct vub300_mmc_host *vub300,
1599                                       struct mmc_command *cmd,
1600                                       struct mmc_data *data, int data_length)
1601 {
1602         /* cmd_mutex is held by vub300_cmndwork_thread */
1603         long respretval;
1604         int msec_timeout = 1000 + data_length / 4;
1605         respretval =
1606                 wait_for_completion_timeout(&vub300->command_complete,
1607                                             msecs_to_jiffies(msec_timeout));
1608         if (respretval == 0) { /* TIMED OUT */
1609                 /* we don't know which of "out" and "res" if any failed */
1610                 int result;
1611                 vub300->usb_timed_out = 1;
1612                 usb_kill_urb(vub300->command_out_urb);
1613                 usb_kill_urb(vub300->command_res_urb);
1614                 cmd->error = -ETIMEDOUT;
1615                 result = usb_lock_device_for_reset(vub300->udev,
1616                                                    vub300->interface);
1617                 if (result == 0) {
1618                         result = usb_reset_device(vub300->udev);
1619                         usb_unlock_device(vub300->udev);
1620                 }
1621         } else if (respretval < 0) {
1622                 /* we don't know which of "out" and "res" if any failed */
1623                 usb_kill_urb(vub300->command_out_urb);
1624                 usb_kill_urb(vub300->command_res_urb);
1625                 cmd->error = respretval;
1626         } else if (cmd->error) {
1627                 /*
1628                  * the error occurred sending the command
1629                  * or receiving the response
1630                  */
1631         } else if (vub300->command_out_urb->status) {
1632                 vub300->usb_transport_fail = vub300->command_out_urb->status;
1633                 cmd->error = -EPROTO == vub300->command_out_urb->status ?
1634                         -ESHUTDOWN : vub300->command_out_urb->status;
1635         } else if (vub300->command_res_urb->status) {
1636                 vub300->usb_transport_fail = vub300->command_res_urb->status;
1637                 cmd->error = -EPROTO == vub300->command_res_urb->status ?
1638                         -ESHUTDOWN : vub300->command_res_urb->status;
1639         } else if (vub300->resp.common.header_type == 0x00) {
1640                 /*
1641                  * the command completed successfully
1642                  * and there was no piggybacked data
1643                  */
1644         } else if (vub300->resp.common.header_type == RESPONSE_ERROR) {
1645                 cmd->error =
1646                         vub300_response_error(vub300->resp.error.error_code);
1647                 if (vub300->data)
1648                         usb_sg_cancel(&vub300->sg_request);
1649         } else if (vub300->resp.common.header_type == RESPONSE_PIGGYBACKED) {
1650                 int offloaded_data_length =
1651                         vub300->resp.common.header_size -
1652                         sizeof(struct sd_register_header);
1653                 int register_count = offloaded_data_length >> 3;
1654                 int ri = 0;
1655                 while (register_count--) {
1656                         add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]);
1657                         ri += 1;
1658                 }
1659                 vub300->resp.common.header_size =
1660                         sizeof(struct sd_register_header);
1661                 vub300->resp.common.header_type = 0x00;
1662                 cmd->error = 0;
1663         } else if (vub300->resp.common.header_type == RESPONSE_PIG_DISABLED) {
1664                 int offloaded_data_length =
1665                         vub300->resp.common.header_size -
1666                         sizeof(struct sd_register_header);
1667                 int register_count = offloaded_data_length >> 3;
1668                 int ri = 0;
1669                 while (register_count--) {
1670                         add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]);
1671                         ri += 1;
1672                 }
1673                 mutex_lock(&vub300->irq_mutex);
1674                 if (vub300->irqs_queued) {
1675                         vub300->irqs_queued += 1;
1676                 } else if (vub300->irq_enabled) {
1677                         vub300->irqs_queued += 1;
1678                         vub300_queue_poll_work(vub300, 0);
1679                 } else {
1680                         vub300->irqs_queued += 1;
1681                 }
1682                 vub300->irq_disabled = 1;
1683                 mutex_unlock(&vub300->irq_mutex);
1684                 vub300->resp.common.header_size =
1685                         sizeof(struct sd_register_header);
1686                 vub300->resp.common.header_type = 0x00;
1687                 cmd->error = 0;
1688         } else if (vub300->resp.common.header_type == RESPONSE_PIG_ENABLED) {
1689                 int offloaded_data_length =
1690                         vub300->resp.common.header_size -
1691                         sizeof(struct sd_register_header);
1692                 int register_count = offloaded_data_length >> 3;
1693                 int ri = 0;
1694                 while (register_count--) {
1695                         add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]);
1696                         ri += 1;
1697                 }
1698                 mutex_lock(&vub300->irq_mutex);
1699                 if (vub300->irqs_queued) {
1700                         vub300->irqs_queued += 1;
1701                 } else if (vub300->irq_enabled) {
1702                         vub300->irqs_queued += 1;
1703                         vub300_queue_poll_work(vub300, 0);
1704                 } else {
1705                         vub300->irqs_queued += 1;
1706                 }
1707                 vub300->irq_disabled = 0;
1708                 mutex_unlock(&vub300->irq_mutex);
1709                 vub300->resp.common.header_size =
1710                         sizeof(struct sd_register_header);
1711                 vub300->resp.common.header_type = 0x00;
1712                 cmd->error = 0;
1713         } else {
1714                 cmd->error = -EINVAL;
1715         }
1716 }
1717
1718 static void construct_request_response(struct vub300_mmc_host *vub300,
1719                                        struct mmc_command *cmd)
1720 {
1721         int resp_len = vub300->resp_len;
1722         int less_cmd = (17 == resp_len) ? resp_len : resp_len - 1;
1723         int bytes = 3 & less_cmd;
1724         int words = less_cmd >> 2;
1725         u8 *r = vub300->resp.response.command_response;
1726         if (bytes == 3) {
1727                 cmd->resp[words] = (r[1 + (words << 2)] << 24)
1728                         | (r[2 + (words << 2)] << 16)
1729                         | (r[3 + (words << 2)] << 8);
1730         } else if (bytes == 2) {
1731                 cmd->resp[words] = (r[1 + (words << 2)] << 24)
1732                         | (r[2 + (words << 2)] << 16);
1733         } else if (bytes == 1) {
1734                 cmd->resp[words] = (r[1 + (words << 2)] << 24);
1735         }
1736         while (words-- > 0) {
1737                 cmd->resp[words] = (r[1 + (words << 2)] << 24)
1738                         | (r[2 + (words << 2)] << 16)
1739                         | (r[3 + (words << 2)] << 8)
1740                         | (r[4 + (words << 2)] << 0);
1741         }
1742         if ((cmd->opcode == 53) && (0x000000FF & cmd->resp[0]))
1743                 cmd->resp[0] &= 0xFFFFFF00;
1744 }
1745
1746 /* this thread runs only when there is an upper level command req outstanding */
1747 static void vub300_cmndwork_thread(struct work_struct *work)
1748 {
1749         struct vub300_mmc_host *vub300 =
1750                 container_of(work, struct vub300_mmc_host, cmndwork);
1751         if (!vub300->interface) {
1752                 kref_put(&vub300->kref, vub300_delete);
1753                 return;
1754         } else {
1755                 struct mmc_request *req = vub300->req;
1756                 struct mmc_command *cmd = vub300->cmd;
1757                 struct mmc_data *data = vub300->data;
1758                 int data_length;
1759                 mutex_lock(&vub300->cmd_mutex);
1760                 init_completion(&vub300->command_complete);
1761                 if (likely(vub300->vub_name[0]) || !vub300->mmc->card ||
1762                     !mmc_card_present(vub300->mmc->card)) {
1763                         /*
1764                          * the name of the EMPTY Pseudo firmware file
1765                          * is used as a flag to indicate that the file
1766                          * has been already downloaded to the VUB300 chip
1767                          */
1768                 } else if (0 == vub300->mmc->card->sdio_funcs) {
1769                         strncpy(vub300->vub_name, "SD memory device",
1770                                 sizeof(vub300->vub_name));
1771                 } else {
1772                         download_offload_pseudocode(vub300);
1773                 }
1774                 send_command(vub300);
1775                 if (!data)
1776                         data_length = 0;
1777                 else if (MMC_DATA_READ & data->flags)
1778                         data_length = __command_read_data(vub300, cmd, data);
1779                 else
1780                         data_length = __command_write_data(vub300, cmd, data);
1781                 __vub300_command_response(vub300, cmd, data, data_length);
1782                 vub300->req = NULL;
1783                 vub300->cmd = NULL;
1784                 vub300->data = NULL;
1785                 if (cmd->error) {
1786                         if (cmd->error == -ENOMEDIUM)
1787                                 check_vub300_port_status(vub300);
1788                         mutex_unlock(&vub300->cmd_mutex);
1789                         mmc_request_done(vub300->mmc, req);
1790                         kref_put(&vub300->kref, vub300_delete);
1791                         return;
1792                 } else {
1793                         construct_request_response(vub300, cmd);
1794                         vub300->resp_len = 0;
1795                         mutex_unlock(&vub300->cmd_mutex);
1796                         kref_put(&vub300->kref, vub300_delete);
1797                         mmc_request_done(vub300->mmc, req);
1798                         return;
1799                 }
1800         }
1801 }
1802
1803 static int examine_cyclic_buffer(struct vub300_mmc_host *vub300,
1804                                  struct mmc_command *cmd, u8 Function)
1805 {
1806         /* cmd_mutex is held by vub300_mmc_request */
1807         u8 cmd0 = 0xFF & (cmd->arg >> 24);
1808         u8 cmd1 = 0xFF & (cmd->arg >> 16);
1809         u8 cmd2 = 0xFF & (cmd->arg >> 8);
1810         u8 cmd3 = 0xFF & (cmd->arg >> 0);
1811         int first = MAXREGMASK & vub300->fn[Function].offload_point;
1812         struct offload_registers_access *rf = &vub300->fn[Function].reg[first];
1813         if (cmd0 == rf->command_byte[0] &&
1814             cmd1 == rf->command_byte[1] &&
1815             cmd2 == rf->command_byte[2] &&
1816             cmd3 == rf->command_byte[3]) {
1817                 u8 checksum = 0x00;
1818                 cmd->resp[1] = checksum << 24;
1819                 cmd->resp[0] = (rf->Respond_Byte[0] << 24)
1820                         | (rf->Respond_Byte[1] << 16)
1821                         | (rf->Respond_Byte[2] << 8)
1822                         | (rf->Respond_Byte[3] << 0);
1823                 vub300->fn[Function].offload_point += 1;
1824                 vub300->fn[Function].offload_count -= 1;
1825                 vub300->total_offload_count -= 1;
1826                 return 1;
1827         } else {
1828                 int delta = 1;  /* because it does not match the first one */
1829                 u8 register_count = vub300->fn[Function].offload_count - 1;
1830                 u32 register_point = vub300->fn[Function].offload_point + 1;
1831                 while (0 < register_count) {
1832                         int point = MAXREGMASK & register_point;
1833                         struct offload_registers_access *r =
1834                                 &vub300->fn[Function].reg[point];
1835                         if (cmd0 == r->command_byte[0] &&
1836                             cmd1 == r->command_byte[1] &&
1837                             cmd2 == r->command_byte[2] &&
1838                             cmd3 == r->command_byte[3]) {
1839                                 u8 checksum = 0x00;
1840                                 cmd->resp[1] = checksum << 24;
1841                                 cmd->resp[0] = (r->Respond_Byte[0] << 24)
1842                                         | (r->Respond_Byte[1] << 16)
1843                                         | (r->Respond_Byte[2] << 8)
1844                                         | (r->Respond_Byte[3] << 0);
1845                                 vub300->fn[Function].offload_point += delta;
1846                                 vub300->fn[Function].offload_count -= delta;
1847                                 vub300->total_offload_count -= delta;
1848                                 return 1;
1849                         } else {
1850                                 register_point += 1;
1851                                 register_count -= 1;
1852                                 delta += 1;
1853                                 continue;
1854                         }
1855                 }
1856                 return 0;
1857         }
1858 }
1859
1860 static int satisfy_request_from_offloaded_data(struct vub300_mmc_host *vub300,
1861                                                struct mmc_command *cmd)
1862 {
1863         /* cmd_mutex is held by vub300_mmc_request */
1864         u8 regs = vub300->dynamic_register_count;
1865         u8 i = 0;
1866         u8 func = FUN(cmd);
1867         u32 reg = REG(cmd);
1868         while (0 < regs--) {
1869                 if ((vub300->sdio_register[i].func_num == func) &&
1870                     (vub300->sdio_register[i].sdio_reg == reg)) {
1871                         if (!vub300->sdio_register[i].prepared) {
1872                                 return 0;
1873                         } else if ((0x80000000 & cmd->arg) == 0x80000000) {
1874                                 /*
1875                                  * a write to a dynamic register
1876                                  * nullifies our offloaded value
1877                                  */
1878                                 vub300->sdio_register[i].prepared = 0;
1879                                 return 0;
1880                         } else {
1881                                 u8 checksum = 0x00;
1882                                 u8 rsp0 = 0x00;
1883                                 u8 rsp1 = 0x00;
1884                                 u8 rsp2 = vub300->sdio_register[i].response;
1885                                 u8 rsp3 = vub300->sdio_register[i].regvalue;
1886                                 vub300->sdio_register[i].prepared = 0;
1887                                 cmd->resp[1] = checksum << 24;
1888                                 cmd->resp[0] = (rsp0 << 24)
1889                                         | (rsp1 << 16)
1890                                         | (rsp2 << 8)
1891                                         | (rsp3 << 0);
1892                                 return 1;
1893                         }
1894                 } else {
1895                         i += 1;
1896                         continue;
1897                 }
1898         };
1899         if (vub300->total_offload_count == 0)
1900                 return 0;
1901         else if (vub300->fn[func].offload_count == 0)
1902                 return 0;
1903         else
1904                 return examine_cyclic_buffer(vub300, cmd, func);
1905 }
1906
1907 static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
1908 {                               /* NOT irq */
1909         struct mmc_command *cmd = req->cmd;
1910         struct vub300_mmc_host *vub300 = mmc_priv(mmc);
1911         if (!vub300->interface) {
1912                 cmd->error = -ESHUTDOWN;
1913                 mmc_request_done(mmc, req);
1914                 return;
1915         } else {
1916                 struct mmc_data *data = req->data;
1917                 if (!vub300->card_powered) {
1918                         cmd->error = -ENOMEDIUM;
1919                         mmc_request_done(mmc, req);
1920                         return;
1921                 }
1922                 if (!vub300->card_present) {
1923                         cmd->error = -ENOMEDIUM;
1924                         mmc_request_done(mmc, req);
1925                         return;
1926                 }
1927                 if (vub300->usb_transport_fail) {
1928                         cmd->error = vub300->usb_transport_fail;
1929                         mmc_request_done(mmc, req);
1930                         return;
1931                 }
1932                 if (!vub300->interface) {
1933                         cmd->error = -ENODEV;
1934                         mmc_request_done(mmc, req);
1935                         return;
1936                 }
1937                 kref_get(&vub300->kref);
1938                 mutex_lock(&vub300->cmd_mutex);
1939                 mod_timer(&vub300->inactivity_timer, jiffies + HZ);
1940                 /*
1941                  * for performance we have to return immediately
1942                  * if the requested data has been offloaded
1943                  */
1944                 if (cmd->opcode == 52 &&
1945                     satisfy_request_from_offloaded_data(vub300, cmd)) {
1946                         cmd->error = 0;
1947                         mutex_unlock(&vub300->cmd_mutex);
1948                         kref_put(&vub300->kref, vub300_delete);
1949                         mmc_request_done(mmc, req);
1950                         return;
1951                 } else {
1952                         vub300->cmd = cmd;
1953                         vub300->req = req;
1954                         vub300->data = data;
1955                         if (data)
1956                                 vub300->datasize = data->blksz * data->blocks;
1957                         else
1958                                 vub300->datasize = 0;
1959                         vub300_queue_cmnd_work(vub300);
1960                         mutex_unlock(&vub300->cmd_mutex);
1961                         kref_put(&vub300->kref, vub300_delete);
1962                         /*
1963                          * the kernel lock diagnostics complain
1964                          * if the cmd_mutex * is "passed on"
1965                          * to the cmndwork thread,
1966                          * so we must release it now
1967                          * and re-acquire it in the cmndwork thread
1968                          */
1969                 }
1970         }
1971 }
1972
1973 static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
1974                               struct mmc_ios *ios)
1975 {
1976         int buf_array_size = 8; /* ARRAY_SIZE(buf) does not work !!! */
1977         int retval;
1978         u32 kHzClock;
1979         if (ios->clock >= 48000000)
1980                 kHzClock = 48000;
1981         else if (ios->clock >= 24000000)
1982                 kHzClock = 24000;
1983         else if (ios->clock >= 20000000)
1984                 kHzClock = 20000;
1985         else if (ios->clock >= 15000000)
1986                 kHzClock = 15000;
1987         else if (ios->clock >= 200000)
1988                 kHzClock = 200;
1989         else
1990                 kHzClock = 0;
1991         {
1992                 int i;
1993                 u64 c = kHzClock;
1994                 for (i = 0; i < buf_array_size; i++) {
1995                         buf[i] = c;
1996                         c >>= 8;
1997                 }
1998         }
1999         retval =
2000                 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2001                                 SET_CLOCK_SPEED,
2002                                 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2003                                 0x00, 0x00, buf, buf_array_size, HZ);
2004         if (retval != 8) {
2005                 dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
2006                         " %dkHz failed with retval=%d\n", kHzClock, retval);
2007         } else {
2008                 dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
2009                         " %dkHz\n", kHzClock);
2010         }
2011 }
2012
2013 static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
2014 {                               /* NOT irq */
2015         struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2016         if (!vub300->interface)
2017                 return;
2018         kref_get(&vub300->kref);
2019         mutex_lock(&vub300->cmd_mutex);
2020         if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) {
2021                 vub300->card_powered = 0;
2022                 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2023                                 SET_SD_POWER,
2024                                 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2025                                 0x0000, 0x0000, NULL, 0, HZ);
2026                 /* must wait for the VUB300 u-proc to boot up */
2027                 msleep(600);
2028         } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
2029                 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
2030                                 SET_SD_POWER,
2031                                 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2032                                 0x0001, 0x0000, NULL, 0, HZ);
2033                 msleep(600);
2034                 vub300->card_powered = 1;
2035         } else if (ios->power_mode == MMC_POWER_ON) {
2036                 u8 *buf = kmalloc(8, GFP_KERNEL);
2037                 if (buf) {
2038                         __set_clock_speed(vub300, buf, ios);
2039                         kfree(buf);
2040                 }
2041         } else {
2042                 /* this should mean no change of state */
2043         }
2044         mutex_unlock(&vub300->cmd_mutex);
2045         kref_put(&vub300->kref, vub300_delete);
2046 }
2047
2048 static int vub300_mmc_get_ro(struct mmc_host *mmc)
2049 {
2050         struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2051         return vub300->read_only;
2052 }
2053
2054 static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable)
2055 {                               /* NOT irq */
2056         struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2057         if (!vub300->interface)
2058                 return;
2059         kref_get(&vub300->kref);
2060         if (enable) {
2061                 mutex_lock(&vub300->irq_mutex);
2062                 if (vub300->irqs_queued) {
2063                         vub300->irqs_queued -= 1;
2064                         mmc_signal_sdio_irq(vub300->mmc);
2065                 } else if (vub300->irq_disabled) {
2066                         vub300->irq_disabled = 0;
2067                         vub300->irq_enabled = 1;
2068                         vub300_queue_poll_work(vub300, 0);
2069                 } else if (vub300->irq_enabled) {
2070                         /* this should not happen, so we will just ignore it */
2071                 } else {
2072                         vub300->irq_enabled = 1;
2073                         vub300_queue_poll_work(vub300, 0);
2074                 }
2075                 mutex_unlock(&vub300->irq_mutex);
2076         } else {
2077                 vub300->irq_enabled = 0;
2078         }
2079         kref_put(&vub300->kref, vub300_delete);
2080 }
2081
2082 void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card)
2083 {                               /* NOT irq */
2084         struct vub300_mmc_host *vub300 = mmc_priv(mmc);
2085         dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n");
2086 }
2087
2088 static struct mmc_host_ops vub300_mmc_ops = {
2089         .request = vub300_mmc_request,
2090         .set_ios = vub300_mmc_set_ios,
2091         .get_ro = vub300_mmc_get_ro,
2092         .enable_sdio_irq = vub300_enable_sdio_irq,
2093         .init_card = vub300_init_card,
2094 };
2095
2096 static int vub300_probe(struct usb_interface *interface,
2097                         const struct usb_device_id *id)
2098 {                               /* NOT irq */
2099         struct vub300_mmc_host *vub300;
2100         struct usb_host_interface *iface_desc;
2101         struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
2102         int i;
2103         int retval = -ENOMEM;
2104         struct urb *command_out_urb;
2105         struct urb *command_res_urb;
2106         struct mmc_host *mmc;
2107         char manufacturer[48];
2108         char product[32];
2109         char serial_number[32];
2110         usb_string(udev, udev->descriptor.iManufacturer, manufacturer,
2111                    sizeof(manufacturer));
2112         usb_string(udev, udev->descriptor.iProduct, product, sizeof(product));
2113         usb_string(udev, udev->descriptor.iSerialNumber, serial_number,
2114                    sizeof(serial_number));
2115         dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n",
2116                  udev->descriptor.idVendor, udev->descriptor.idProduct,
2117                  manufacturer, product, serial_number);
2118         command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
2119         if (!command_out_urb) {
2120                 retval = -ENOMEM;
2121                 dev_err(&udev->dev, "not enough memory for command_out_urb\n");
2122                 goto error0;
2123         }
2124         command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
2125         if (!command_res_urb) {
2126                 retval = -ENOMEM;
2127                 dev_err(&udev->dev, "not enough memory for command_res_urb\n");
2128                 goto error1;
2129         }
2130         /* this also allocates memory for our VUB300 mmc host device */
2131         mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
2132         if (!mmc) {
2133                 retval = -ENOMEM;
2134                 dev_err(&udev->dev, "not enough memory for the mmc_host\n");
2135                 goto error4;
2136         }
2137         /* MMC core transfer sizes tunable parameters */
2138         mmc->caps = 0;
2139         if (!force_1_bit_data_xfers)
2140                 mmc->caps |= MMC_CAP_4_BIT_DATA;
2141         if (!force_polling_for_irqs)
2142                 mmc->caps |= MMC_CAP_SDIO_IRQ;
2143         mmc->caps &= ~MMC_CAP_NEEDS_POLL;
2144         /*
2145          * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll
2146          * for devices which results in spurious CMD7's being
2147          * issued which stops some SDIO cards from working
2148          */
2149         if (limit_speed_to_24_MHz) {
2150                 mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2151                 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2152                 mmc->f_max = 24000000;
2153                 dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n");
2154         } else {
2155                 mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
2156                 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2157                 mmc->f_max = 48000000;
2158         }
2159         mmc->f_min = 200000;
2160         mmc->max_blk_count = 511;
2161         mmc->max_blk_size = 512;
2162         mmc->max_segs = 128;
2163         if (force_max_req_size)
2164                 mmc->max_req_size = force_max_req_size * 1024;
2165         else
2166                 mmc->max_req_size = 64 * 1024;
2167         mmc->max_seg_size = mmc->max_req_size;
2168         mmc->ocr_avail = 0;
2169         mmc->ocr_avail |= MMC_VDD_165_195;
2170         mmc->ocr_avail |= MMC_VDD_20_21;
2171         mmc->ocr_avail |= MMC_VDD_21_22;
2172         mmc->ocr_avail |= MMC_VDD_22_23;
2173         mmc->ocr_avail |= MMC_VDD_23_24;
2174         mmc->ocr_avail |= MMC_VDD_24_25;
2175         mmc->ocr_avail |= MMC_VDD_25_26;
2176         mmc->ocr_avail |= MMC_VDD_26_27;
2177         mmc->ocr_avail |= MMC_VDD_27_28;
2178         mmc->ocr_avail |= MMC_VDD_28_29;
2179         mmc->ocr_avail |= MMC_VDD_29_30;
2180         mmc->ocr_avail |= MMC_VDD_30_31;
2181         mmc->ocr_avail |= MMC_VDD_31_32;
2182         mmc->ocr_avail |= MMC_VDD_32_33;
2183         mmc->ocr_avail |= MMC_VDD_33_34;
2184         mmc->ocr_avail |= MMC_VDD_34_35;
2185         mmc->ocr_avail |= MMC_VDD_35_36;
2186         mmc->ops = &vub300_mmc_ops;
2187         vub300 = mmc_priv(mmc);
2188         vub300->mmc = mmc;
2189         vub300->card_powered = 0;
2190         vub300->bus_width = 0;
2191         vub300->cmnd.head.block_size[0] = 0x00;
2192         vub300->cmnd.head.block_size[1] = 0x00;
2193         vub300->app_spec = 0;
2194         mutex_init(&vub300->cmd_mutex);
2195         mutex_init(&vub300->irq_mutex);
2196         vub300->command_out_urb = command_out_urb;
2197         vub300->command_res_urb = command_res_urb;
2198         vub300->usb_timed_out = 0;
2199         vub300->dynamic_register_count = 0;
2200
2201         for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
2202                 vub300->fn[i].offload_point = 0;
2203                 vub300->fn[i].offload_count = 0;
2204         }
2205
2206         vub300->total_offload_count = 0;
2207         vub300->irq_enabled = 0;
2208         vub300->irq_disabled = 0;
2209         vub300->irqs_queued = 0;
2210
2211         for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
2212                 vub300->sdio_register[i++].activate = 0;
2213
2214         vub300->udev = udev;
2215         vub300->interface = interface;
2216         vub300->cmnd_res_ep = 0;
2217         vub300->cmnd_out_ep = 0;
2218         vub300->data_inp_ep = 0;
2219         vub300->data_out_ep = 0;
2220
2221         for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
2222                 vub300->fbs[i] = 512;
2223
2224         /*
2225          *      set up the endpoint information
2226          *
2227          * use the first pair of bulk-in and bulk-out
2228          *     endpoints for Command/Response+Interrupt
2229          *
2230          * use the second pair of bulk-in and bulk-out
2231          *     endpoints for Data In/Out
2232          */
2233         vub300->large_usb_packets = 0;
2234         iface_desc = interface->cur_altsetting;
2235         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2236                 struct usb_endpoint_descriptor *endpoint =
2237                         &iface_desc->endpoint[i].desc;
2238                 dev_info(&vub300->udev->dev,
2239                          "vub300 testing %s EndPoint(%d) %02X\n",
2240                          usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" :
2241                          usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" :
2242                          "UNKNOWN", i, endpoint->bEndpointAddress);
2243                 if (endpoint->wMaxPacketSize > 64)
2244                         vub300->large_usb_packets = 1;
2245                 if (usb_endpoint_is_bulk_in(endpoint)) {
2246                         if (!vub300->cmnd_res_ep) {
2247                                 vub300->cmnd_res_ep =
2248                                         endpoint->bEndpointAddress;
2249                         } else if (!vub300->data_inp_ep) {
2250                                 vub300->data_inp_ep =
2251                                         endpoint->bEndpointAddress;
2252                         } else {
2253                                 dev_warn(&vub300->udev->dev,
2254                                          "ignoring"
2255                                          " unexpected bulk_in endpoint");
2256                         }
2257                 } else if (usb_endpoint_is_bulk_out(endpoint)) {
2258                         if (!vub300->cmnd_out_ep) {
2259                                 vub300->cmnd_out_ep =
2260                                         endpoint->bEndpointAddress;
2261                         } else if (!vub300->data_out_ep) {
2262                                 vub300->data_out_ep =
2263                                         endpoint->bEndpointAddress;
2264                         } else {
2265                                 dev_warn(&vub300->udev->dev,
2266                                          "ignoring"
2267                                          " unexpected bulk_out endpoint");
2268                         }
2269                 } else {
2270                         dev_warn(&vub300->udev->dev,
2271                                  "vub300 ignoring EndPoint(%d) %02X", i,
2272                                  endpoint->bEndpointAddress);
2273                 }
2274         }
2275         if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
2276             vub300->data_inp_ep && vub300->data_out_ep) {
2277                 dev_info(&vub300->udev->dev,
2278                          "vub300 %s packets"
2279                          " using EndPoints %02X %02X %02X %02X\n",
2280                          vub300->large_usb_packets ? "LARGE" : "SMALL",
2281                          vub300->cmnd_out_ep, vub300->cmnd_res_ep,
2282                          vub300->data_out_ep, vub300->data_inp_ep);
2283                 /* we have the expected EndPoints */
2284         } else {
2285                 dev_err(&vub300->udev->dev,
2286                     "Could not find two sets of bulk-in/out endpoint pairs\n");
2287                 retval = -EINVAL;
2288                 goto error5;
2289         }
2290         retval =
2291                 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2292                                 GET_HC_INF0,
2293                                 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2294                                 0x0000, 0x0000, &vub300->hc_info,
2295                                 sizeof(vub300->hc_info), HZ);
2296         if (retval < 0)
2297                 goto error5;
2298         retval =
2299                 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2300                                 SET_ROM_WAIT_STATES,
2301                                 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2302                                 firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
2303         if (retval < 0)
2304                 goto error5;
2305         dev_info(&vub300->udev->dev,
2306                  "operating_mode = %s %s %d MHz %s %d byte USB packets\n",
2307                  (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
2308                  (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit",
2309                  mmc->f_max / 1000000,
2310                  pad_input_to_usb_pkt ? "padding input data to" : "with",
2311                  vub300->large_usb_packets ? 512 : 64);
2312         retval =
2313                 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
2314                                 GET_SYSTEM_PORT_STATUS,
2315                                 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
2316                                 0x0000, 0x0000, &vub300->system_port_status,
2317                                 sizeof(vub300->system_port_status), HZ);
2318         if (retval < 0) {
2319                 goto error4;
2320         } else if (sizeof(vub300->system_port_status) == retval) {
2321                 vub300->card_present =
2322                         (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
2323                 vub300->read_only =
2324                         (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
2325         } else {
2326                 goto error4;
2327         }
2328         usb_set_intfdata(interface, vub300);
2329         INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
2330         INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread);
2331         INIT_WORK(&vub300->deadwork, vub300_deadwork_thread);
2332         kref_init(&vub300->kref);
2333         init_timer(&vub300->sg_transfer_timer);
2334         vub300->sg_transfer_timer.data = (unsigned long)vub300;
2335         vub300->sg_transfer_timer.function = vub300_sg_timed_out;
2336         kref_get(&vub300->kref);
2337         init_timer(&vub300->inactivity_timer);
2338         vub300->inactivity_timer.data = (unsigned long)vub300;
2339         vub300->inactivity_timer.function = vub300_inactivity_timer_expired;
2340         vub300->inactivity_timer.expires = jiffies + HZ;
2341         add_timer(&vub300->inactivity_timer);
2342         if (vub300->card_present)
2343                 dev_info(&vub300->udev->dev,
2344                          "USB vub300 remote SDIO host controller[%d]"
2345                          "connected with SD/SDIO card inserted\n",
2346                          interface_to_InterfaceNumber(interface));
2347         else
2348                 dev_info(&vub300->udev->dev,
2349                          "USB vub300 remote SDIO host controller[%d]"
2350                          "connected with no SD/SDIO card inserted\n",
2351                          interface_to_InterfaceNumber(interface));
2352         mmc_add_host(mmc);
2353         return 0;
2354 error5:
2355         mmc_free_host(mmc);
2356         /*
2357          * and hence also frees vub300
2358          * which is contained at the end of struct mmc
2359          */
2360 error4:
2361         usb_free_urb(command_out_urb);
2362 error1:
2363         usb_free_urb(command_res_urb);
2364 error0:
2365         return retval;
2366 }
2367
2368 static void vub300_disconnect(struct usb_interface *interface)
2369 {                               /* NOT irq */
2370         struct vub300_mmc_host *vub300 = usb_get_intfdata(interface);
2371         if (!vub300 || !vub300->mmc) {
2372                 return;
2373         } else {
2374                 struct mmc_host *mmc = vub300->mmc;
2375                 if (!vub300->mmc) {
2376                         return;
2377                 } else {
2378                         int ifnum = interface_to_InterfaceNumber(interface);
2379                         usb_set_intfdata(interface, NULL);
2380                         /* prevent more I/O from starting */
2381                         vub300->interface = NULL;
2382                         kref_put(&vub300->kref, vub300_delete);
2383                         mmc_remove_host(mmc);
2384                         pr_info("USB vub300 remote SDIO host controller[%d]"
2385                                 " now disconnected", ifnum);
2386                         return;
2387                 }
2388         }
2389 }
2390
2391 #ifdef CONFIG_PM
2392 static int vub300_suspend(struct usb_interface *intf, pm_message_t message)
2393 {
2394         struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2395         if (!vub300 || !vub300->mmc) {
2396                 return 0;
2397         } else {
2398                 struct mmc_host *mmc = vub300->mmc;
2399                 mmc_suspend_host(mmc);
2400                 return 0;
2401         }
2402 }
2403
2404 static int vub300_resume(struct usb_interface *intf)
2405 {
2406         struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2407         if (!vub300 || !vub300->mmc) {
2408                 return 0;
2409         } else {
2410                 struct mmc_host *mmc = vub300->mmc;
2411                 mmc_resume_host(mmc);
2412                 return 0;
2413         }
2414 }
2415 #else
2416 #define vub300_suspend NULL
2417 #define vub300_resume NULL
2418 #endif
2419 static int vub300_pre_reset(struct usb_interface *intf)
2420 {                               /* NOT irq */
2421         struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2422         mutex_lock(&vub300->cmd_mutex);
2423         return 0;
2424 }
2425
2426 static int vub300_post_reset(struct usb_interface *intf)
2427 {                               /* NOT irq */
2428         struct vub300_mmc_host *vub300 = usb_get_intfdata(intf);
2429         /* we are sure no URBs are active - no locking needed */
2430         vub300->errors = -EPIPE;
2431         mutex_unlock(&vub300->cmd_mutex);
2432         return 0;
2433 }
2434
2435 static struct usb_driver vub300_driver = {
2436         .name = "vub300",
2437         .probe = vub300_probe,
2438         .disconnect = vub300_disconnect,
2439         .suspend = vub300_suspend,
2440         .resume = vub300_resume,
2441         .pre_reset = vub300_pre_reset,
2442         .post_reset = vub300_post_reset,
2443         .id_table = vub300_table,
2444         .supports_autosuspend = 1,
2445 };
2446
2447 static int __init vub300_init(void)
2448 {                               /* NOT irq */
2449         int result;
2450
2451         pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X",
2452                 firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout);
2453         cmndworkqueue = create_singlethread_workqueue("kvub300c");
2454         if (!cmndworkqueue) {
2455                 pr_err("not enough memory for the REQUEST workqueue");
2456                 result = -ENOMEM;
2457                 goto out1;
2458         }
2459         pollworkqueue = create_singlethread_workqueue("kvub300p");
2460         if (!pollworkqueue) {
2461                 pr_err("not enough memory for the IRQPOLL workqueue");
2462                 result = -ENOMEM;
2463                 goto out2;
2464         }
2465         deadworkqueue = create_singlethread_workqueue("kvub300d");
2466         if (!deadworkqueue) {
2467                 pr_err("not enough memory for the EXPIRED workqueue");
2468                 result = -ENOMEM;
2469                 goto out3;
2470         }
2471         result = usb_register(&vub300_driver);
2472         if (result) {
2473                 pr_err("usb_register failed. Error number %d", result);
2474                 goto out4;
2475         }
2476         return 0;
2477 out4:
2478         destroy_workqueue(deadworkqueue);
2479 out3:
2480         destroy_workqueue(pollworkqueue);
2481 out2:
2482         destroy_workqueue(cmndworkqueue);
2483 out1:
2484         return result;
2485 }
2486
2487 static void __exit vub300_exit(void)
2488 {
2489         usb_deregister(&vub300_driver);
2490         flush_workqueue(cmndworkqueue);
2491         flush_workqueue(pollworkqueue);
2492         flush_workqueue(deadworkqueue);
2493         destroy_workqueue(cmndworkqueue);
2494         destroy_workqueue(pollworkqueue);
2495         destroy_workqueue(deadworkqueue);
2496 }
2497
2498 module_init(vub300_init);
2499 module_exit(vub300_exit);
2500
2501 MODULE_AUTHOR("Tony Olech <tony.olech@elandigitalsystems.com>");
2502 MODULE_DESCRIPTION("VUB300 USB to SD/MMC/SDIO adapter driver");
2503 MODULE_LICENSE("GPL");