mmc: tmio: check ILL_FUNC instead of CBSY
[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / mmc / host / tmio_mmc_pio.c
1 /*
2  * linux/drivers/mmc/host/tmio_mmc_pio.c
3  *
4  * Copyright (C) 2011 Guennadi Liakhovetski
5  * Copyright (C) 2007 Ian Molton
6  * Copyright (C) 2004 Ian Molton
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * Driver for the MMC / SD / SDIO IP found in:
13  *
14  * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
15  *
16  * This driver draws mainly on scattered spec sheets, Reverse engineering
17  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
18  * support). (Further 4 bit support from a later datasheet).
19  *
20  * TODO:
21  *   Investigate using a workqueue for PIO transfers
22  *   Eliminate FIXMEs
23  *   SDIO support
24  *   Better Power management
25  *   Handle MMC errors better
26  *   double buffer support
27  *
28  */
29
30 #include <linux/delay.h>
31 #include <linux/device.h>
32 #include <linux/highmem.h>
33 #include <linux/interrupt.h>
34 #include <linux/io.h>
35 #include <linux/irq.h>
36 #include <linux/mfd/tmio.h>
37 #include <linux/mmc/host.h>
38 #include <linux/mmc/mmc.h>
39 #include <linux/mmc/slot-gpio.h>
40 #include <linux/mmc/tmio.h>
41 #include <linux/module.h>
42 #include <linux/pagemap.h>
43 #include <linux/platform_device.h>
44 #include <linux/pm_qos.h>
45 #include <linux/pm_runtime.h>
46 #include <linux/regulator/consumer.h>
47 #include <linux/mmc/sdio.h>
48 #include <linux/scatterlist.h>
49 #include <linux/spinlock.h>
50 #include <linux/workqueue.h>
51
52 #include "tmio_mmc.h"
53
54 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
55 {
56         host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
57         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
58 }
59
60 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
61 {
62         host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
63         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
64 }
65
66 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
67 {
68         sd_ctrl_write32(host, CTL_STATUS, ~i);
69 }
70
71 static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
72 {
73         host->sg_len = data->sg_len;
74         host->sg_ptr = data->sg;
75         host->sg_orig = data->sg;
76         host->sg_off = 0;
77 }
78
79 static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
80 {
81         host->sg_ptr = sg_next(host->sg_ptr);
82         host->sg_off = 0;
83         return --host->sg_len;
84 }
85
86 #ifdef CONFIG_MMC_DEBUG
87
88 #define STATUS_TO_TEXT(a, status, i) \
89         do { \
90                 if (status & TMIO_STAT_##a) { \
91                         if (i++) \
92                                 printk(" | "); \
93                         printk(#a); \
94                 } \
95         } while (0)
96
97 static void pr_debug_status(u32 status)
98 {
99         int i = 0;
100         pr_debug("status: %08x = ", status);
101         STATUS_TO_TEXT(CARD_REMOVE, status, i);
102         STATUS_TO_TEXT(CARD_INSERT, status, i);
103         STATUS_TO_TEXT(SIGSTATE, status, i);
104         STATUS_TO_TEXT(WRPROTECT, status, i);
105         STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
106         STATUS_TO_TEXT(CARD_INSERT_A, status, i);
107         STATUS_TO_TEXT(SIGSTATE_A, status, i);
108         STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
109         STATUS_TO_TEXT(STOPBIT_ERR, status, i);
110         STATUS_TO_TEXT(ILL_FUNC, status, i);
111         STATUS_TO_TEXT(CMD_BUSY, status, i);
112         STATUS_TO_TEXT(CMDRESPEND, status, i);
113         STATUS_TO_TEXT(DATAEND, status, i);
114         STATUS_TO_TEXT(CRCFAIL, status, i);
115         STATUS_TO_TEXT(DATATIMEOUT, status, i);
116         STATUS_TO_TEXT(CMDTIMEOUT, status, i);
117         STATUS_TO_TEXT(RXOVERFLOW, status, i);
118         STATUS_TO_TEXT(TXUNDERRUN, status, i);
119         STATUS_TO_TEXT(RXRDY, status, i);
120         STATUS_TO_TEXT(TXRQ, status, i);
121         STATUS_TO_TEXT(ILL_ACCESS, status, i);
122         printk("\n");
123 }
124
125 #else
126 #define pr_debug_status(s)  do { } while (0)
127 #endif
128
129 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
130 {
131         struct tmio_mmc_host *host = mmc_priv(mmc);
132
133         if (enable && !host->sdio_irq_enabled) {
134                 /* Keep device active while SDIO irq is enabled */
135                 pm_runtime_get_sync(mmc_dev(mmc));
136                 host->sdio_irq_enabled = true;
137
138                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
139                                         ~TMIO_SDIO_STAT_IOIRQ;
140                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
141                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
142         } else if (!enable && host->sdio_irq_enabled) {
143                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
144                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
145                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
146
147                 host->sdio_irq_enabled = false;
148                 pm_runtime_mark_last_busy(mmc_dev(mmc));
149                 pm_runtime_put_autosuspend(mmc_dev(mmc));
150         }
151 }
152
153 static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
154                                 unsigned int new_clock)
155 {
156         u32 clk = 0, clock;
157
158         if (new_clock) {
159                 for (clock = host->mmc->f_min, clk = 0x80000080;
160                         new_clock >= (clock<<1); clk >>= 1)
161                         clock <<= 1;
162                 clk |= 0x100;
163         }
164
165         if (host->set_clk_div)
166                 host->set_clk_div(host->pdev, (clk>>22) & 1);
167
168         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
169         msleep(10);
170 }
171
172 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
173 {
174         /* implicit BUG_ON(!res) */
175         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
176                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
177                 msleep(10);
178         }
179
180         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
181                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
182         msleep(10);
183 }
184
185 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
186 {
187         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
188                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
189         msleep(10);
190
191         /* implicit BUG_ON(!res) */
192         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
193                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
194                 msleep(10);
195         }
196 }
197
198 static void tmio_mmc_reset(struct tmio_mmc_host *host)
199 {
200         /* FIXME - should we set stop clock reg here */
201         sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
202         /* implicit BUG_ON(!res) */
203         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
204                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
205         msleep(10);
206         sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
207         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
208                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
209         msleep(10);
210 }
211
212 static void tmio_mmc_reset_work(struct work_struct *work)
213 {
214         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
215                                                   delayed_reset_work.work);
216         struct mmc_request *mrq;
217         unsigned long flags;
218
219         spin_lock_irqsave(&host->lock, flags);
220         mrq = host->mrq;
221
222         /*
223          * is request already finished? Since we use a non-blocking
224          * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
225          * us, so, have to check for IS_ERR(host->mrq)
226          */
227         if (IS_ERR_OR_NULL(mrq)
228             || time_is_after_jiffies(host->last_req_ts +
229                 msecs_to_jiffies(2000))) {
230                 spin_unlock_irqrestore(&host->lock, flags);
231                 return;
232         }
233
234         dev_warn(&host->pdev->dev,
235                 "timeout waiting for hardware interrupt (CMD%u)\n",
236                 mrq->cmd->opcode);
237
238         if (host->data)
239                 host->data->error = -ETIMEDOUT;
240         else if (host->cmd)
241                 host->cmd->error = -ETIMEDOUT;
242         else
243                 mrq->cmd->error = -ETIMEDOUT;
244
245         host->cmd = NULL;
246         host->data = NULL;
247         host->force_pio = false;
248
249         spin_unlock_irqrestore(&host->lock, flags);
250
251         tmio_mmc_reset(host);
252
253         /* Ready for new calls */
254         host->mrq = NULL;
255
256         tmio_mmc_abort_dma(host);
257         mmc_request_done(host->mmc, mrq);
258
259         pm_runtime_mark_last_busy(mmc_dev(host->mmc));
260         pm_runtime_put_autosuspend(mmc_dev(host->mmc));
261 }
262
263 /* called with host->lock held, interrupts disabled */
264 static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
265 {
266         struct mmc_request *mrq;
267         unsigned long flags;
268
269         spin_lock_irqsave(&host->lock, flags);
270
271         mrq = host->mrq;
272         if (IS_ERR_OR_NULL(mrq)) {
273                 spin_unlock_irqrestore(&host->lock, flags);
274                 return;
275         }
276
277         host->cmd = NULL;
278         host->data = NULL;
279         host->force_pio = false;
280
281         cancel_delayed_work(&host->delayed_reset_work);
282
283         host->mrq = NULL;
284         spin_unlock_irqrestore(&host->lock, flags);
285
286         if (mrq->cmd->error || (mrq->data && mrq->data->error))
287                 tmio_mmc_abort_dma(host);
288
289         mmc_request_done(host->mmc, mrq);
290
291         pm_runtime_mark_last_busy(mmc_dev(host->mmc));
292         pm_runtime_put_autosuspend(mmc_dev(host->mmc));
293 }
294
295 static void tmio_mmc_done_work(struct work_struct *work)
296 {
297         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
298                                                   done);
299         tmio_mmc_finish_request(host);
300 }
301
302 /* These are the bitmasks the tmio chip requires to implement the MMC response
303  * types. Note that R1 and R6 are the same in this scheme. */
304 #define APP_CMD        0x0040
305 #define RESP_NONE      0x0300
306 #define RESP_R1        0x0400
307 #define RESP_R1B       0x0500
308 #define RESP_R2        0x0600
309 #define RESP_R3        0x0700
310 #define DATA_PRESENT   0x0800
311 #define TRANSFER_READ  0x1000
312 #define TRANSFER_MULTI 0x2000
313 #define SECURITY_CMD   0x4000
314 #define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
315
316 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
317 {
318         struct mmc_data *data = host->data;
319         int c = cmd->opcode;
320         u32 irq_mask = TMIO_MASK_CMD;
321
322         /* CMD12 is handled by hardware */
323         if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
324                 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
325                 return 0;
326         }
327
328         switch (mmc_resp_type(cmd)) {
329         case MMC_RSP_NONE: c |= RESP_NONE; break;
330         case MMC_RSP_R1:   c |= RESP_R1;   break;
331         case MMC_RSP_R1B:  c |= RESP_R1B;  break;
332         case MMC_RSP_R2:   c |= RESP_R2;   break;
333         case MMC_RSP_R3:   c |= RESP_R3;   break;
334         default:
335                 pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
336                 return -EINVAL;
337         }
338
339         host->cmd = cmd;
340
341 /* FIXME - this seems to be ok commented out but the spec suggest this bit
342  *         should be set when issuing app commands.
343  *      if(cmd->flags & MMC_FLAG_ACMD)
344  *              c |= APP_CMD;
345  */
346         if (data) {
347                 c |= DATA_PRESENT;
348                 if (data->blocks > 1) {
349                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
350                         c |= TRANSFER_MULTI;
351
352                         /*
353                          * Disable auto CMD12 at IO_RW_EXTENDED when
354                          * multiple block transfer
355                          */
356                         if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
357                             (cmd->opcode == SD_IO_RW_EXTENDED))
358                                 c |= NO_CMD12_ISSUE;
359                 }
360                 if (data->flags & MMC_DATA_READ)
361                         c |= TRANSFER_READ;
362         }
363
364         if (!host->native_hotplug)
365                 irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
366         tmio_mmc_enable_mmc_irqs(host, irq_mask);
367
368         /* Fire off the command */
369         sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
370         sd_ctrl_write16(host, CTL_SD_CMD, c);
371
372         return 0;
373 }
374
375 /*
376  * This chip always returns (at least?) as much data as you ask for.
377  * I'm unsure what happens if you ask for less than a block. This should be
378  * looked into to ensure that a funny length read doesn't hose the controller.
379  */
380 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
381 {
382         struct mmc_data *data = host->data;
383         void *sg_virt;
384         unsigned short *buf;
385         unsigned int count;
386         unsigned long flags;
387
388         if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
389                 pr_err("PIO IRQ in DMA mode!\n");
390                 return;
391         } else if (!data) {
392                 pr_debug("Spurious PIO IRQ\n");
393                 return;
394         }
395
396         sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
397         buf = (unsigned short *)(sg_virt + host->sg_off);
398
399         count = host->sg_ptr->length - host->sg_off;
400         if (count > data->blksz)
401                 count = data->blksz;
402
403         pr_debug("count: %08x offset: %08x flags %08x\n",
404                  count, host->sg_off, data->flags);
405
406         /* Transfer the data */
407         if (data->flags & MMC_DATA_READ)
408                 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
409         else
410                 sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
411
412         host->sg_off += count;
413
414         tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
415
416         if (host->sg_off == host->sg_ptr->length)
417                 tmio_mmc_next_sg(host);
418
419         return;
420 }
421
422 static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
423 {
424         if (host->sg_ptr == &host->bounce_sg) {
425                 unsigned long flags;
426                 void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
427                 memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
428                 tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
429         }
430 }
431
432 /* needs to be called with host->lock held */
433 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
434 {
435         struct mmc_data *data = host->data;
436         struct mmc_command *stop;
437
438         host->data = NULL;
439
440         if (!data) {
441                 dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
442                 return;
443         }
444         stop = data->stop;
445
446         /* FIXME - return correct transfer count on errors */
447         if (!data->error)
448                 data->bytes_xfered = data->blocks * data->blksz;
449         else
450                 data->bytes_xfered = 0;
451
452         pr_debug("Completed data request\n");
453
454         /*
455          * FIXME: other drivers allow an optional stop command of any given type
456          *        which we dont do, as the chip can auto generate them.
457          *        Perhaps we can be smarter about when to use auto CMD12 and
458          *        only issue the auto request when we know this is the desired
459          *        stop command, allowing fallback to the stop command the
460          *        upper layers expect. For now, we do what works.
461          */
462
463         if (data->flags & MMC_DATA_READ) {
464                 if (host->chan_rx && !host->force_pio)
465                         tmio_mmc_check_bounce_buffer(host);
466                 dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
467                         host->mrq);
468         } else {
469                 dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
470                         host->mrq);
471         }
472
473         if (stop) {
474                 if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
475                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
476                 else
477                         BUG();
478         }
479
480         schedule_work(&host->done);
481 }
482
483 static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
484 {
485         struct mmc_data *data;
486         spin_lock(&host->lock);
487         data = host->data;
488
489         if (!data)
490                 goto out;
491
492         if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
493                 u32 status = sd_ctrl_read32(host, CTL_STATUS);
494                 bool done = false;
495
496                 /*
497                  * Has all data been written out yet? Testing on SuperH showed,
498                  * that in most cases the first interrupt comes already with the
499                  * BUSY status bit clear, but on some operations, like mount or
500                  * in the beginning of a write / sync / umount, there is one
501                  * DATAEND interrupt with the BUSY bit set, in this cases
502                  * waiting for one more interrupt fixes the problem.
503                  */
504                 if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
505                         if (status & TMIO_STAT_ILL_FUNC)
506                                 done = true;
507                 } else {
508                         if (!(status & TMIO_STAT_CMD_BUSY))
509                                 done = true;
510                 }
511
512                 if (done) {
513                         tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
514                         tasklet_schedule(&host->dma_complete);
515                 }
516         } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
517                 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
518                 tasklet_schedule(&host->dma_complete);
519         } else {
520                 tmio_mmc_do_data_irq(host);
521                 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
522         }
523 out:
524         spin_unlock(&host->lock);
525 }
526
527 static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
528         unsigned int stat)
529 {
530         struct mmc_command *cmd = host->cmd;
531         int i, addr;
532
533         spin_lock(&host->lock);
534
535         if (!host->cmd) {
536                 pr_debug("Spurious CMD irq\n");
537                 goto out;
538         }
539
540         host->cmd = NULL;
541
542         /* This controller is sicker than the PXA one. Not only do we need to
543          * drop the top 8 bits of the first response word, we also need to
544          * modify the order of the response for short response command types.
545          */
546
547         for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
548                 cmd->resp[i] = sd_ctrl_read32(host, addr);
549
550         if (cmd->flags &  MMC_RSP_136) {
551                 cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
552                 cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
553                 cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
554                 cmd->resp[3] <<= 8;
555         } else if (cmd->flags & MMC_RSP_R3) {
556                 cmd->resp[0] = cmd->resp[3];
557         }
558
559         if (stat & TMIO_STAT_CMDTIMEOUT)
560                 cmd->error = -ETIMEDOUT;
561         else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
562                 cmd->error = -EILSEQ;
563
564         /* If there is data to handle we enable data IRQs here, and
565          * we will ultimatley finish the request in the data_end handler.
566          * If theres no data or we encountered an error, finish now.
567          */
568         if (host->data && !cmd->error) {
569                 if (host->data->flags & MMC_DATA_READ) {
570                         if (host->force_pio || !host->chan_rx)
571                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
572                         else
573                                 tasklet_schedule(&host->dma_issue);
574                 } else {
575                         if (host->force_pio || !host->chan_tx)
576                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
577                         else
578                                 tasklet_schedule(&host->dma_issue);
579                 }
580         } else {
581                 schedule_work(&host->done);
582         }
583
584 out:
585         spin_unlock(&host->lock);
586 }
587
588 static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
589                                        int *ireg, int *status)
590 {
591         *status = sd_ctrl_read32(host, CTL_STATUS);
592         *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
593
594         pr_debug_status(*status);
595         pr_debug_status(*ireg);
596
597         /* Clear the status except the interrupt status */
598         sd_ctrl_write32(host, CTL_STATUS, TMIO_MASK_IRQ);
599 }
600
601 static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
602                                       int ireg, int status)
603 {
604         struct mmc_host *mmc = host->mmc;
605
606         /* Card insert / remove attempts */
607         if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
608                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
609                         TMIO_STAT_CARD_REMOVE);
610                 if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
611                      ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
612                     !work_pending(&mmc->detect.work))
613                         mmc_detect_change(host->mmc, msecs_to_jiffies(100));
614                 return true;
615         }
616
617         return false;
618 }
619
620 irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
621 {
622         unsigned int ireg, status;
623         struct tmio_mmc_host *host = devid;
624
625         tmio_mmc_card_irq_status(host, &ireg, &status);
626         __tmio_mmc_card_detect_irq(host, ireg, status);
627
628         return IRQ_HANDLED;
629 }
630 EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
631
632 static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
633                                  int ireg, int status)
634 {
635         /* Command completion */
636         if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
637                 tmio_mmc_ack_mmc_irqs(host,
638                              TMIO_STAT_CMDRESPEND |
639                              TMIO_STAT_CMDTIMEOUT);
640                 tmio_mmc_cmd_irq(host, status);
641                 return true;
642         }
643
644         /* Data transfer */
645         if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
646                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
647                 tmio_mmc_pio_irq(host);
648                 return true;
649         }
650
651         /* Data transfer completion */
652         if (ireg & TMIO_STAT_DATAEND) {
653                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
654                 tmio_mmc_data_irq(host);
655                 return true;
656         }
657
658         return false;
659 }
660
661 irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
662 {
663         unsigned int ireg, status;
664         struct tmio_mmc_host *host = devid;
665
666         tmio_mmc_card_irq_status(host, &ireg, &status);
667         __tmio_mmc_sdcard_irq(host, ireg, status);
668
669         return IRQ_HANDLED;
670 }
671 EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
672
673 irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
674 {
675         struct tmio_mmc_host *host = devid;
676         struct mmc_host *mmc = host->mmc;
677         struct tmio_mmc_data *pdata = host->pdata;
678         unsigned int ireg, status;
679         unsigned int sdio_status;
680
681         if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
682                 return IRQ_HANDLED;
683
684         status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
685         ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
686
687         sdio_status = status & ~TMIO_SDIO_MASK_ALL;
688         if (pdata->flags & TMIO_MMC_SDIO_STATUS_QUIRK)
689                 sdio_status |= 6;
690
691         sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
692
693         if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
694                 mmc_signal_sdio_irq(mmc);
695
696         return IRQ_HANDLED;
697 }
698 EXPORT_SYMBOL(tmio_mmc_sdio_irq);
699
700 irqreturn_t tmio_mmc_irq(int irq, void *devid)
701 {
702         struct tmio_mmc_host *host = devid;
703         unsigned int ireg, status;
704
705         pr_debug("MMC IRQ begin\n");
706
707         tmio_mmc_card_irq_status(host, &ireg, &status);
708         if (__tmio_mmc_card_detect_irq(host, ireg, status))
709                 return IRQ_HANDLED;
710         if (__tmio_mmc_sdcard_irq(host, ireg, status))
711                 return IRQ_HANDLED;
712
713         tmio_mmc_sdio_irq(irq, devid);
714
715         return IRQ_HANDLED;
716 }
717 EXPORT_SYMBOL(tmio_mmc_irq);
718
719 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
720         struct mmc_data *data)
721 {
722         struct tmio_mmc_data *pdata = host->pdata;
723
724         pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
725                  data->blksz, data->blocks);
726
727         /* Some hardware cannot perform 2 byte requests in 4 bit mode */
728         if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
729                 int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
730
731                 if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
732                         pr_err("%s: %d byte block unsupported in 4 bit mode\n",
733                                mmc_hostname(host->mmc), data->blksz);
734                         return -EINVAL;
735                 }
736         }
737
738         tmio_mmc_init_sg(host, data);
739         host->data = data;
740
741         /* Set transfer length / blocksize */
742         sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
743         sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
744
745         tmio_mmc_start_dma(host, data);
746
747         return 0;
748 }
749
750 /* Process requests from the MMC layer */
751 static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
752 {
753         struct tmio_mmc_host *host = mmc_priv(mmc);
754         unsigned long flags;
755         int ret;
756
757         spin_lock_irqsave(&host->lock, flags);
758
759         if (host->mrq) {
760                 pr_debug("request not null\n");
761                 if (IS_ERR(host->mrq)) {
762                         spin_unlock_irqrestore(&host->lock, flags);
763                         mrq->cmd->error = -EAGAIN;
764                         mmc_request_done(mmc, mrq);
765                         return;
766                 }
767         }
768
769         host->last_req_ts = jiffies;
770         wmb();
771         host->mrq = mrq;
772
773         spin_unlock_irqrestore(&host->lock, flags);
774
775         pm_runtime_get_sync(mmc_dev(mmc));
776
777         if (mrq->data) {
778                 ret = tmio_mmc_start_data(host, mrq->data);
779                 if (ret)
780                         goto fail;
781         }
782
783         ret = tmio_mmc_start_command(host, mrq->cmd);
784         if (!ret) {
785                 schedule_delayed_work(&host->delayed_reset_work,
786                                       msecs_to_jiffies(2000));
787                 return;
788         }
789
790 fail:
791         host->force_pio = false;
792         host->mrq = NULL;
793         mrq->cmd->error = ret;
794         mmc_request_done(mmc, mrq);
795
796         pm_runtime_mark_last_busy(mmc_dev(mmc));
797         pm_runtime_put_autosuspend(mmc_dev(mmc));
798 }
799
800 static int tmio_mmc_clk_update(struct tmio_mmc_host *host)
801 {
802         struct mmc_host *mmc = host->mmc;
803         struct tmio_mmc_data *pdata = host->pdata;
804         int ret;
805
806         if (!pdata->clk_enable)
807                 return -ENOTSUPP;
808
809         ret = pdata->clk_enable(host->pdev, &mmc->f_max);
810         if (!ret)
811                 mmc->f_min = mmc->f_max / 512;
812
813         return ret;
814 }
815
816 static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
817 {
818         struct mmc_host *mmc = host->mmc;
819         int ret = 0;
820
821         /* .set_ios() is returning void, so, no chance to report an error */
822
823         if (host->set_pwr)
824                 host->set_pwr(host->pdev, 1);
825
826         if (!IS_ERR(mmc->supply.vmmc)) {
827                 ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
828                 /*
829                  * Attention: empiric value. With a b43 WiFi SDIO card this
830                  * delay proved necessary for reliable card-insertion probing.
831                  * 100us were not enough. Is this the same 140us delay, as in
832                  * tmio_mmc_set_ios()?
833                  */
834                 udelay(200);
835         }
836         /*
837          * It seems, VccQ should be switched on after Vcc, this is also what the
838          * omap_hsmmc.c driver does.
839          */
840         if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
841                 ret = regulator_enable(mmc->supply.vqmmc);
842                 udelay(200);
843         }
844
845         if (ret < 0)
846                 dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n",
847                         ret);
848 }
849
850 static void tmio_mmc_power_off(struct tmio_mmc_host *host)
851 {
852         struct mmc_host *mmc = host->mmc;
853
854         if (!IS_ERR(mmc->supply.vqmmc))
855                 regulator_disable(mmc->supply.vqmmc);
856
857         if (!IS_ERR(mmc->supply.vmmc))
858                 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
859
860         if (host->set_pwr)
861                 host->set_pwr(host->pdev, 0);
862 }
863
864 static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
865                                 unsigned char bus_width)
866 {
867         switch (bus_width) {
868         case MMC_BUS_WIDTH_1:
869                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
870                 break;
871         case MMC_BUS_WIDTH_4:
872                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
873                 break;
874         }
875 }
876
877 /* Set MMC clock / power.
878  * Note: This controller uses a simple divider scheme therefore it cannot
879  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
880  * MMC wont run that fast, it has to be clocked at 12MHz which is the next
881  * slowest setting.
882  */
883 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
884 {
885         struct tmio_mmc_host *host = mmc_priv(mmc);
886         struct device *dev = &host->pdev->dev;
887         unsigned long flags;
888
889         pm_runtime_get_sync(mmc_dev(mmc));
890
891         mutex_lock(&host->ios_lock);
892
893         spin_lock_irqsave(&host->lock, flags);
894         if (host->mrq) {
895                 if (IS_ERR(host->mrq)) {
896                         dev_dbg(dev,
897                                 "%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
898                                 current->comm, task_pid_nr(current),
899                                 ios->clock, ios->power_mode);
900                         host->mrq = ERR_PTR(-EINTR);
901                 } else {
902                         dev_dbg(dev,
903                                 "%s.%d: CMD%u active since %lu, now %lu!\n",
904                                 current->comm, task_pid_nr(current),
905                                 host->mrq->cmd->opcode, host->last_req_ts, jiffies);
906                 }
907                 spin_unlock_irqrestore(&host->lock, flags);
908
909                 mutex_unlock(&host->ios_lock);
910                 return;
911         }
912
913         host->mrq = ERR_PTR(-EBUSY);
914
915         spin_unlock_irqrestore(&host->lock, flags);
916
917         switch (ios->power_mode) {
918         case MMC_POWER_OFF:
919                 tmio_mmc_power_off(host);
920                 tmio_mmc_clk_stop(host);
921                 break;
922         case MMC_POWER_UP:
923                 tmio_mmc_set_clock(host, ios->clock);
924                 tmio_mmc_power_on(host, ios->vdd);
925                 tmio_mmc_clk_start(host);
926                 tmio_mmc_set_bus_width(host, ios->bus_width);
927                 break;
928         case MMC_POWER_ON:
929                 tmio_mmc_set_clock(host, ios->clock);
930                 tmio_mmc_clk_start(host);
931                 tmio_mmc_set_bus_width(host, ios->bus_width);
932                 break;
933         }
934
935         /* Let things settle. delay taken from winCE driver */
936         udelay(140);
937         if (PTR_ERR(host->mrq) == -EINTR)
938                 dev_dbg(&host->pdev->dev,
939                         "%s.%d: IOS interrupted: clk %u, mode %u",
940                         current->comm, task_pid_nr(current),
941                         ios->clock, ios->power_mode);
942         host->mrq = NULL;
943
944         host->clk_cache = ios->clock;
945
946         mutex_unlock(&host->ios_lock);
947
948         pm_runtime_mark_last_busy(mmc_dev(mmc));
949         pm_runtime_put_autosuspend(mmc_dev(mmc));
950 }
951
952 static int tmio_mmc_get_ro(struct mmc_host *mmc)
953 {
954         struct tmio_mmc_host *host = mmc_priv(mmc);
955         struct tmio_mmc_data *pdata = host->pdata;
956         int ret = mmc_gpio_get_ro(mmc);
957         if (ret >= 0)
958                 return ret;
959
960         pm_runtime_get_sync(mmc_dev(mmc));
961         ret = !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
962                 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
963         pm_runtime_mark_last_busy(mmc_dev(mmc));
964         pm_runtime_put_autosuspend(mmc_dev(mmc));
965
966         return ret;
967 }
968
969 static const struct mmc_host_ops tmio_mmc_ops = {
970         .request        = tmio_mmc_request,
971         .set_ios        = tmio_mmc_set_ios,
972         .get_ro         = tmio_mmc_get_ro,
973         .get_cd         = mmc_gpio_get_cd,
974         .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
975 };
976
977 static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
978 {
979         struct tmio_mmc_data *pdata = host->pdata;
980         struct mmc_host *mmc = host->mmc;
981
982         mmc_regulator_get_supply(mmc);
983
984         /* use ocr_mask if no regulator */
985         if (!mmc->ocr_avail)
986                 mmc->ocr_avail =  pdata->ocr_mask;
987
988         /*
989          * try again.
990          * There is possibility that regulator has not been probed
991          */
992         if (!mmc->ocr_avail)
993                 return -EPROBE_DEFER;
994
995         return 0;
996 }
997
998 static void tmio_mmc_of_parse(struct platform_device *pdev,
999                               struct tmio_mmc_data *pdata)
1000 {
1001         const struct device_node *np = pdev->dev.of_node;
1002         if (!np)
1003                 return;
1004
1005         if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
1006                 pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE;
1007 }
1008
1009 int tmio_mmc_host_probe(struct tmio_mmc_host **host,
1010                                   struct platform_device *pdev,
1011                                   struct tmio_mmc_data *pdata)
1012 {
1013         struct tmio_mmc_host *_host;
1014         struct mmc_host *mmc;
1015         struct resource *res_ctl;
1016         int ret;
1017         u32 irq_mask = TMIO_MASK_CMD;
1018
1019         tmio_mmc_of_parse(pdev, pdata);
1020
1021         if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
1022                 pdata->write16_hook = NULL;
1023
1024         res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1025         if (!res_ctl)
1026                 return -EINVAL;
1027
1028         mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
1029         if (!mmc)
1030                 return -ENOMEM;
1031
1032         ret = mmc_of_parse(mmc);
1033         if (ret < 0)
1034                 goto host_free;
1035
1036         pdata->dev = &pdev->dev;
1037         _host = mmc_priv(mmc);
1038         _host->pdata = pdata;
1039         _host->mmc = mmc;
1040         _host->pdev = pdev;
1041         platform_set_drvdata(pdev, mmc);
1042
1043         _host->set_pwr = pdata->set_pwr;
1044         _host->set_clk_div = pdata->set_clk_div;
1045
1046         ret = tmio_mmc_init_ocr(_host);
1047         if (ret < 0)
1048                 goto host_free;
1049
1050         _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
1051         if (!_host->ctl) {
1052                 ret = -ENOMEM;
1053                 goto host_free;
1054         }
1055
1056         mmc->ops = &tmio_mmc_ops;
1057         mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
1058         mmc->caps2 |= pdata->capabilities2;
1059         mmc->max_segs = 32;
1060         mmc->max_blk_size = 512;
1061         mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
1062                 mmc->max_segs;
1063         mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
1064         mmc->max_seg_size = mmc->max_req_size;
1065
1066         _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
1067                                   mmc->caps & MMC_CAP_NEEDS_POLL ||
1068                                   mmc->caps & MMC_CAP_NONREMOVABLE ||
1069                                   mmc->slot.cd_irq >= 0);
1070
1071         if (tmio_mmc_clk_update(_host) < 0) {
1072                 mmc->f_max = pdata->hclk;
1073                 mmc->f_min = mmc->f_max / 512;
1074         }
1075
1076         /*
1077          * While using internal tmio hardware logic for card detection, we need
1078          * to ensure it stays powered for it to work.
1079          */
1080         if (_host->native_hotplug)
1081                 pm_runtime_get_noresume(&pdev->dev);
1082
1083         tmio_mmc_clk_stop(_host);
1084         tmio_mmc_reset(_host);
1085
1086         _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
1087         tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
1088
1089         /* Unmask the IRQs we want to know about */
1090         if (!_host->chan_rx)
1091                 irq_mask |= TMIO_MASK_READOP;
1092         if (!_host->chan_tx)
1093                 irq_mask |= TMIO_MASK_WRITEOP;
1094         if (!_host->native_hotplug)
1095                 irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
1096
1097         _host->sdcard_irq_mask &= ~irq_mask;
1098
1099         _host->sdio_irq_enabled = false;
1100         if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
1101                 _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
1102                 sd_ctrl_write16(_host, CTL_SDIO_IRQ_MASK, _host->sdio_irq_mask);
1103                 sd_ctrl_write16(_host, CTL_TRANSACTION_CTL, 0x0000);
1104         }
1105
1106         spin_lock_init(&_host->lock);
1107         mutex_init(&_host->ios_lock);
1108
1109         /* Init delayed work for request timeouts */
1110         INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
1111         INIT_WORK(&_host->done, tmio_mmc_done_work);
1112
1113         /* See if we also get DMA */
1114         tmio_mmc_request_dma(_host, pdata);
1115
1116         pm_runtime_set_active(&pdev->dev);
1117         pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
1118         pm_runtime_use_autosuspend(&pdev->dev);
1119         pm_runtime_enable(&pdev->dev);
1120
1121         ret = mmc_add_host(mmc);
1122         if (ret < 0) {
1123                 tmio_mmc_host_remove(_host);
1124                 return ret;
1125         }
1126
1127         dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
1128
1129         if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
1130                 ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
1131                 if (ret < 0) {
1132                         tmio_mmc_host_remove(_host);
1133                         return ret;
1134                 }
1135         }
1136
1137         *host = _host;
1138
1139         return 0;
1140
1141 host_free:
1142         mmc_free_host(mmc);
1143
1144         return ret;
1145 }
1146 EXPORT_SYMBOL(tmio_mmc_host_probe);
1147
1148 void tmio_mmc_host_remove(struct tmio_mmc_host *host)
1149 {
1150         struct platform_device *pdev = host->pdev;
1151         struct mmc_host *mmc = host->mmc;
1152
1153         if (!host->native_hotplug)
1154                 pm_runtime_get_sync(&pdev->dev);
1155
1156         dev_pm_qos_hide_latency_limit(&pdev->dev);
1157
1158         mmc_remove_host(mmc);
1159         cancel_work_sync(&host->done);
1160         cancel_delayed_work_sync(&host->delayed_reset_work);
1161         tmio_mmc_release_dma(host);
1162
1163         pm_runtime_put_sync(&pdev->dev);
1164         pm_runtime_disable(&pdev->dev);
1165
1166         iounmap(host->ctl);
1167         mmc_free_host(mmc);
1168 }
1169 EXPORT_SYMBOL(tmio_mmc_host_remove);
1170
1171 #ifdef CONFIG_PM
1172 int tmio_mmc_host_runtime_suspend(struct device *dev)
1173 {
1174         struct mmc_host *mmc = dev_get_drvdata(dev);
1175         struct tmio_mmc_host *host = mmc_priv(mmc);
1176
1177         tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
1178
1179         if (host->clk_cache)
1180                 tmio_mmc_clk_stop(host);
1181
1182         if (host->pdata->clk_disable)
1183                 host->pdata->clk_disable(host->pdev);
1184
1185         return 0;
1186 }
1187 EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);
1188
1189 int tmio_mmc_host_runtime_resume(struct device *dev)
1190 {
1191         struct mmc_host *mmc = dev_get_drvdata(dev);
1192         struct tmio_mmc_host *host = mmc_priv(mmc);
1193
1194         tmio_mmc_reset(host);
1195         tmio_mmc_clk_update(host);
1196
1197         if (host->clk_cache) {
1198                 tmio_mmc_set_clock(host, host->clk_cache);
1199                 tmio_mmc_clk_start(host);
1200         }
1201
1202         tmio_mmc_enable_dma(host, true);
1203
1204         return 0;
1205 }
1206 EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
1207 #endif
1208
1209 MODULE_LICENSE("GPL v2");