drivers/mmc/host/sdhci-milbeaut.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
   4  *              Vincent Yang <vincent.yang@tw.fujitsu.com>
   5  * Copyright (C) 2015 Linaro Ltd  Andy Green <andy.green@linaro.org>
   6  * Copyright (C) 2019 Socionext Inc.
   7  *              Takao Orito <orito.takao@socionext.com>
   8  */
   9
  10 #include <linux/bits.h>
  11 #include <linux/clk.h>
  12 #include <linux/delay.h>
  13 #include <linux/err.h>
  14 #include <linux/gpio/consumer.h>
  15 #include <linux/module.h>
  16 #include <linux/of.h>
  17 #include <linux/property.h>
  18
  19 #include "sdhci-pltfm.h"
  20 #include "sdhci_f_sdh30.h"
  21
  22 /* milbeaut bridge controller register */
  23 #define MLB_SOFT_RESET          0x0200
  24 #define  MLB_SOFT_RESET_RSTX            BIT(0)
  25
  26 #define MLB_WP_CD_LED_SET       0x0210
  27 #define  MLB_WP_CD_LED_SET_LED_INV  BIT(2)
  28
  29 #define MLB_CR_SET                      0x0220
  30 #define  MLB_CR_SET_CR_TOCLKUNIT       BIT(24)
  31 #define  MLB_CR_SET_CR_TOCLKFREQ_SFT   (16)
  32 #define  MLB_CR_SET_CR_TOCLKFREQ_MASK  (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT)
  33 #define  MLB_CR_SET_CR_BCLKFREQ_SFT    (8)
  34 #define  MLB_CR_SET_CR_BCLKFREQ_MASK   (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT)
  35 #define  MLB_CR_SET_CR_RTUNTIMER_SFT   (4)
  36 #define  MLB_CR_SET_CR_RTUNTIMER_MASK  (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT)
  37
  38 #define MLB_SD_TOCLK_I_DIV  16
  39 #define MLB_TOCLKFREQ_UNIT_THRES    16000000
  40 #define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000)
  41 #define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000)
  42 #define MLB_TOCLKFREQ_MAX   63
  43 #define MLB_TOCLKFREQ_MIN    1
  44
  45 #define MLB_SD_BCLK_I_DIV   4
  46 #define MLB_CAL_BCLKFREQ(rate)  (rate / MLB_SD_BCLK_I_DIV / 1000000)
  47 #define MLB_BCLKFREQ_MAX        255
  48 #define MLB_BCLKFREQ_MIN          1
  49
  50 #define MLB_CDR_SET                     0x0230
  51 #define MLB_CDR_SET_CLK2POW16   3
  52
  53 struct f_sdhost_priv {
  54         struct clk *clk_iface;
  55         struct clk *clk;
  56         struct device *dev;
  57         bool enable_cmd_dat_delay;
  58 };
  59
  60 static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host)
  61 {
  62         u32 ctrl = 0;
  63
  64         usleep_range(2500, 3000);
  65         ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
  66         ctrl |= F_SDH30_CRES_O_DN;
  67         sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
  68         ctrl |= F_SDH30_MSEL_O_1_8;
  69         sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
  70
  71         ctrl &= ~F_SDH30_CRES_O_DN;
  72         sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
  73         usleep_range(2500, 3000);
  74
  75         ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
  76         ctrl |= F_SDH30_CMD_CHK_DIS;
  77         sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
  78 }
  79
  80 static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host)
  81 {
  82         return F_SDH30_MIN_CLOCK;
  83 }
  84
  85 static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask)
  86 {
  87         struct f_sdhost_priv *priv = sdhci_priv(host);
  88         u16 clk;
  89         u32 ctl;
  90         ktime_t timeout;
  91
  92         clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
  93         clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN;
  94         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
  95
  96         sdhci_reset(host, mask);
  97
  98         clk |= SDHCI_CLOCK_CARD_EN;
  99         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 100
 101         timeout = ktime_add_ms(ktime_get(), 10);
 102         while (1) {
 103                 bool timedout = ktime_after(ktime_get(), timeout);
 104
 105                 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 106                 if (clk & SDHCI_CLOCK_INT_STABLE)
 107                         break;
 108                 if (timedout) {
 109                         pr_err("%s: Internal clock never stabilised.\n",
 110                                 mmc_hostname(host->mmc));
 111                         sdhci_dumpregs(host);
 112                         return;
 113                 }
 114                 udelay(10);
 115         }
 116
 117         if (priv->enable_cmd_dat_delay) {
 118                 ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
 119                 ctl |= F_SDH30_CMD_DAT_DELAY;
 120                 sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
 121         }
 122 }
 123
 124 static const struct sdhci_ops sdhci_milbeaut_ops = {
 125         .voltage_switch = sdhci_milbeaut_soft_voltage_switch,
 126         .get_min_clock = sdhci_milbeaut_get_min_clock,
 127         .reset = sdhci_milbeaut_reset,
 128         .set_clock = sdhci_set_clock,
 129         .set_bus_width = sdhci_set_bus_width,
 130         .set_uhs_signaling = sdhci_set_uhs_signaling,
 131         .set_power = sdhci_set_power_and_bus_voltage,
 132 };
 133
 134 static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host,
 135                                                 int reset_flag)
 136 {
 137         if (reset_flag)
 138                 sdhci_writel(host, 0, MLB_SOFT_RESET);
 139         else
 140                 sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET);
 141 }
 142
 143 static void sdhci_milbeaut_bridge_init(struct sdhci_host *host,
 144                                                 int rate)
 145 {
 146         u32 val, clk;
 147
 148         /* IO_SDIO_CR_SET should be set while reset */
 149         val = sdhci_readl(host, MLB_CR_SET);
 150         val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT |
 151                         MLB_CR_SET_CR_BCLKFREQ_MASK);
 152         if (rate >= MLB_TOCLKFREQ_UNIT_THRES) {
 153                 clk = MLB_CAL_TOCLKFREQ_MHZ(rate);
 154                 clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
 155                 val |= MLB_CR_SET_CR_TOCLKUNIT |
 156                         (clk << MLB_CR_SET_CR_TOCLKFREQ_SFT);
 157         } else {
 158                 clk = MLB_CAL_TOCLKFREQ_KHZ(rate);
 159                 clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
 160                 clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk);
 161                 val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT;
 162         }
 163
 164         clk = MLB_CAL_BCLKFREQ(rate);
 165         clk = min_t(u32, MLB_BCLKFREQ_MAX, clk);
 166         clk = max_t(u32, MLB_BCLKFREQ_MIN, clk);
 167         val |=  clk << MLB_CR_SET_CR_BCLKFREQ_SFT;
 168         val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK;
 169         sdhci_writel(host, val, MLB_CR_SET);
 170
 171         sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET);
 172
 173         sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET);
 174 }
 175
 176 static void sdhci_milbeaut_vendor_init(struct sdhci_host *host)
 177 {
 178         struct f_sdhost_priv *priv = sdhci_priv(host);
 179         u32 ctl;
 180
 181         ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
 182         ctl |= F_SDH30_CRES_O_DN;
 183         sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
 184         ctl &= ~F_SDH30_MSEL_O_1_8;
 185         sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
 186         ctl &= ~F_SDH30_CRES_O_DN;
 187         sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
 188
 189         ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
 190         ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
 191                F_SDH30_AHB_INCR_4;
 192         ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
 193         sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG);
 194
 195         if (priv->enable_cmd_dat_delay) {
 196                 ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
 197                 ctl |= F_SDH30_CMD_DAT_DELAY;
 198                 sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
 199         }
 200 }
 201
 202 static const struct of_device_id mlb_dt_ids[] = {
 203         {
 204                 .compatible = "socionext,milbeaut-m10v-sdhci-3.0",
 205         },
 206         { /* sentinel */ }
 207 };
 208 MODULE_DEVICE_TABLE(of, mlb_dt_ids);
 209
 210 static void sdhci_milbeaut_init(struct sdhci_host *host)
 211 {
 212         struct f_sdhost_priv *priv = sdhci_priv(host);
 213         int rate = clk_get_rate(priv->clk);
 214         u16 ctl;
 215
 216         sdhci_milbeaut_bridge_reset(host, 0);
 217
 218         ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 219         ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
 220         sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL);
 221
 222         sdhci_milbeaut_bridge_reset(host, 1);
 223
 224         sdhci_milbeaut_bridge_init(host, rate);
 225         sdhci_milbeaut_bridge_reset(host, 0);
 226
 227         sdhci_milbeaut_vendor_init(host);
 228 }
 229
 230 static int sdhci_milbeaut_probe(struct platform_device *pdev)
 231 {
 232         struct sdhci_host *host;
 233         struct device *dev = &pdev->dev;
 234         int irq, ret = 0;
 235         struct f_sdhost_priv *priv;
 236
 237         irq = platform_get_irq(pdev, 0);
 238         if (irq < 0)
 239                 return irq;
 240
 241         host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
 242         if (IS_ERR(host))
 243                 return PTR_ERR(host);
 244
 245         priv = sdhci_priv(host);
 246         priv->dev = dev;
 247
 248         host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
 249                            SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
 250                            SDHCI_QUIRK_CLOCK_BEFORE_RESET |
 251                            SDHCI_QUIRK_DELAY_AFTER_POWER;
 252         host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
 253                         SDHCI_QUIRK2_TUNING_WORK_AROUND |
 254                         SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
 255
 256         priv->enable_cmd_dat_delay = device_property_read_bool(dev,
 257                                                 "fujitsu,cmd-dat-delay-select");
 258
 259         ret = mmc_of_parse(host->mmc);
 260         if (ret)
 261                 goto err;
 262
 263         platform_set_drvdata(pdev, host);
 264
 265         host->hw_name = "f_sdh30";
 266         host->ops = &sdhci_milbeaut_ops;
 267         host->irq = irq;
 268
 269         host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
 270         if (IS_ERR(host->ioaddr)) {
 271                 ret = PTR_ERR(host->ioaddr);
 272                 goto err;
 273         }
 274
 275         if (dev_of_node(dev)) {
 276                 sdhci_get_of_property(pdev);
 277
 278                 priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
 279                 if (IS_ERR(priv->clk_iface)) {
 280                         ret = PTR_ERR(priv->clk_iface);
 281                         goto err;
 282                 }
 283
 284                 ret = clk_prepare_enable(priv->clk_iface);
 285                 if (ret)
 286                         goto err;
 287
 288                 priv->clk = devm_clk_get(&pdev->dev, "core");
 289                 if (IS_ERR(priv->clk)) {
 290                         ret = PTR_ERR(priv->clk);
 291                         goto err_clk;
 292                 }
 293
 294                 ret = clk_prepare_enable(priv->clk);
 295                 if (ret)
 296                         goto err_clk;
 297         }
 298
 299         sdhci_milbeaut_init(host);
 300
 301         ret = sdhci_add_host(host);
 302         if (ret)
 303                 goto err_add_host;
 304
 305         return 0;
 306
 307 err_add_host:
 308         clk_disable_unprepare(priv->clk);
 309 err_clk:
 310         clk_disable_unprepare(priv->clk_iface);
 311 err:
 312         sdhci_free_host(host);
 313         return ret;
 314 }
 315
 316 static int sdhci_milbeaut_remove(struct platform_device *pdev)
 317 {
 318         struct sdhci_host *host = platform_get_drvdata(pdev);
 319         struct f_sdhost_priv *priv = sdhci_priv(host);
 320
 321         sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
 322                           0xffffffff);
 323
 324         clk_disable_unprepare(priv->clk_iface);
 325         clk_disable_unprepare(priv->clk);
 326
 327         sdhci_free_host(host);
 328         platform_set_drvdata(pdev, NULL);
 329
 330         return 0;
 331 }
 332
 333 static struct platform_driver sdhci_milbeaut_driver = {
 334         .driver = {
 335                 .name = "sdhci-milbeaut",
 336                 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 337                 .of_match_table = of_match_ptr(mlb_dt_ids),
 338         },
 339         .probe  = sdhci_milbeaut_probe,
 340         .remove = sdhci_milbeaut_remove,
 341 };
 342
 343 module_platform_driver(sdhci_milbeaut_driver);
 344
 345 MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver");
 346 MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>");
 347 MODULE_LICENSE("GPL v2");
 348 MODULE_ALIAS("platform:sdhci-milbeaut");