drivers/mmc/host/dw_mmc.c

   1 /*
   2  * Synopsys DesignWare Multimedia Card Interface driver
   3  *  (Based on NXP driver for lpc 31xx)
   4  *
   5  * Copyright (C) 2009 NXP Semiconductors
   6  * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 #include <linux/blkdev.h>
  15 #include <linux/clk.h>
  16 #include <linux/debugfs.h>
  17 #include <linux/device.h>
  18 #include <linux/dma-mapping.h>
  19 #include <linux/err.h>
  20 #include <linux/init.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/ioport.h>
  23 #include <linux/module.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/seq_file.h>
  26 #include <linux/slab.h>
  27 #include <linux/stat.h>
  28 #include <linux/delay.h>
  29 #include <linux/irq.h>
  30 #include <linux/mmc/card.h>
  31 #include <linux/mmc/host.h>
  32 #include <linux/mmc/mmc.h>
  33 #include <linux/mmc/sd.h>
  34 #include <linux/mmc/sdio.h>
  35 #include <linux/mmc/dw_mmc.h>
  36 #include <linux/bitops.h>
  37 #include <linux/regulator/consumer.h>
  38 #include <linux/of.h>
  39 #include <linux/of_gpio.h>
  40 #include <linux/mmc/slot-gpio.h>
  41
  42 #include "dw_mmc.h"
  43
  44 /* Common flag combinations */
  45 #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
  46                                  SDMMC_INT_HTO | SDMMC_INT_SBE  | \
  47                                  SDMMC_INT_EBE)
  48 #define DW_MCI_CMD_ERROR_FLAGS  (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
  49                                  SDMMC_INT_RESP_ERR)
  50 #define DW_MCI_ERROR_FLAGS      (DW_MCI_DATA_ERROR_FLAGS | \
  51                                  DW_MCI_CMD_ERROR_FLAGS  | SDMMC_INT_HLE)
  52 #define DW_MCI_SEND_STATUS      1
  53 #define DW_MCI_RECV_STATUS      2
  54 #define DW_MCI_DMA_THRESHOLD    16
  55
  56 #define DW_MCI_FREQ_MAX 200000000       /* unit: HZ */
  57 #define DW_MCI_FREQ_MIN 400000          /* unit: HZ */
  58
  59 #define IDMAC_INT_CLR           (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
  60                                  SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
  61                                  SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
  62                                  SDMMC_IDMAC_INT_TI)
  63
  64 struct idmac_desc_64addr {
  65         u32             des0;   /* Control Descriptor */
  66
  67         u32             des1;   /* Reserved */
  68
  69         u32             des2;   /*Buffer sizes */
  70 #define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
  71         ((d)->des2 = ((d)->des2 & cpu_to_le32(0x03ffe000)) | \
  72          ((cpu_to_le32(s)) & cpu_to_le32(0x1fff)))
  73
  74         u32             des3;   /* Reserved */
  75
  76         u32             des4;   /* Lower 32-bits of Buffer Address Pointer 1*/
  77         u32             des5;   /* Upper 32-bits of Buffer Address Pointer 1*/
  78
  79         u32             des6;   /* Lower 32-bits of Next Descriptor Address */
  80         u32             des7;   /* Upper 32-bits of Next Descriptor Address */
  81 };
  82
  83 struct idmac_desc {
  84         __le32          des0;   /* Control Descriptor */
  85 #define IDMAC_DES0_DIC  BIT(1)
  86 #define IDMAC_DES0_LD   BIT(2)
  87 #define IDMAC_DES0_FD   BIT(3)
  88 #define IDMAC_DES0_CH   BIT(4)
  89 #define IDMAC_DES0_ER   BIT(5)
  90 #define IDMAC_DES0_CES  BIT(30)
  91 #define IDMAC_DES0_OWN  BIT(31)
  92
  93         __le32          des1;   /* Buffer sizes */
  94 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
  95         ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
  96
  97         __le32          des2;   /* buffer 1 physical address */
  98
  99         __le32          des3;   /* buffer 2 physical address */
 100 };
 101
 102 /* Each descriptor can transfer up to 4KB of data in chained mode */
 103 #define DW_MCI_DESC_DATA_LENGTH 0x1000
 104
 105 static bool dw_mci_reset(struct dw_mci *host);
 106 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
 107 static int dw_mci_card_busy(struct mmc_host *mmc);
 108
 109 #if defined(CONFIG_DEBUG_FS)
 110 static int dw_mci_req_show(struct seq_file *s, void *v)
 111 {
 112         struct dw_mci_slot *slot = s->private;
 113         struct mmc_request *mrq;
 114         struct mmc_command *cmd;
 115         struct mmc_command *stop;
 116         struct mmc_data *data;
 117
 118         /* Make sure we get a consistent snapshot */
 119         spin_lock_bh(&slot->host->lock);
 120         mrq = slot->mrq;
 121
 122         if (mrq) {
 123                 cmd = mrq->cmd;
 124                 data = mrq->data;
 125                 stop = mrq->stop;
 126
 127                 if (cmd)
 128                         seq_printf(s,
 129                                    "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 130                                    cmd->opcode, cmd->arg, cmd->flags,
 131                                    cmd->resp[0], cmd->resp[1], cmd->resp[2],
 132                                    cmd->resp[2], cmd->error);
 133                 if (data)
 134                         seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
 135                                    data->bytes_xfered, data->blocks,
 136                                    data->blksz, data->flags, data->error);
 137                 if (stop)
 138                         seq_printf(s,
 139                                    "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 140                                    stop->opcode, stop->arg, stop->flags,
 141                                    stop->resp[0], stop->resp[1], stop->resp[2],
 142                                    stop->resp[2], stop->error);
 143         }
 144
 145         spin_unlock_bh(&slot->host->lock);
 146
 147         return 0;
 148 }
 149
 150 static int dw_mci_req_open(struct inode *inode, struct file *file)
 151 {
 152         return single_open(file, dw_mci_req_show, inode->i_private);
 153 }
 154
 155 static const struct file_operations dw_mci_req_fops = {
 156         .owner          = THIS_MODULE,
 157         .open           = dw_mci_req_open,
 158         .read           = seq_read,
 159         .llseek         = seq_lseek,
 160         .release        = single_release,
 161 };
 162
 163 static int dw_mci_regs_show(struct seq_file *s, void *v)
 164 {
 165         seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
 166         seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
 167         seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
 168         seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
 169         seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
 170         seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
 171
 172         return 0;
 173 }
 174
 175 static int dw_mci_regs_open(struct inode *inode, struct file *file)
 176 {
 177         return single_open(file, dw_mci_regs_show, inode->i_private);
 178 }
 179
 180 static const struct file_operations dw_mci_regs_fops = {
 181         .owner          = THIS_MODULE,
 182         .open           = dw_mci_regs_open,
 183         .read           = seq_read,
 184         .llseek         = seq_lseek,
 185         .release        = single_release,
 186 };
 187
 188 static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
 189 {
 190         struct mmc_host *mmc = slot->mmc;
 191         struct dw_mci *host = slot->host;
 192         struct dentry *root;
 193         struct dentry *node;
 194
 195         root = mmc->debugfs_root;
 196         if (!root)
 197                 return;
 198
 199         node = debugfs_create_file("regs", S_IRUSR, root, host,
 200                                    &dw_mci_regs_fops);
 201         if (!node)
 202                 goto err;
 203
 204         node = debugfs_create_file("req", S_IRUSR, root, slot,
 205                                    &dw_mci_req_fops);
 206         if (!node)
 207                 goto err;
 208
 209         node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
 210         if (!node)
 211                 goto err;
 212
 213         node = debugfs_create_x32("pending_events", S_IRUSR, root,
 214                                   (u32 *)&host->pending_events);
 215         if (!node)
 216                 goto err;
 217
 218         node = debugfs_create_x32("completed_events", S_IRUSR, root,
 219                                   (u32 *)&host->completed_events);
 220         if (!node)
 221                 goto err;
 222
 223         return;
 224
 225 err:
 226         dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
 227 }
 228 #endif /* defined(CONFIG_DEBUG_FS) */
 229
 230 static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
 231
 232 static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
 233 {
 234         struct mmc_data *data;
 235         struct dw_mci_slot *slot = mmc_priv(mmc);
 236         struct dw_mci *host = slot->host;
 237         u32 cmdr;
 238
 239         cmd->error = -EINPROGRESS;
 240         cmdr = cmd->opcode;
 241
 242         if (cmd->opcode == MMC_STOP_TRANSMISSION ||
 243             cmd->opcode == MMC_GO_IDLE_STATE ||
 244             cmd->opcode == MMC_GO_INACTIVE_STATE ||
 245             (cmd->opcode == SD_IO_RW_DIRECT &&
 246              ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
 247                 cmdr |= SDMMC_CMD_STOP;
 248         else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
 249                 cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
 250
 251         if (cmd->opcode == SD_SWITCH_VOLTAGE) {
 252                 u32 clk_en_a;
 253
 254                 /* Special bit makes CMD11 not die */
 255                 cmdr |= SDMMC_CMD_VOLT_SWITCH;
 256
 257                 /* Change state to continue to handle CMD11 weirdness */
 258                 WARN_ON(slot->host->state != STATE_SENDING_CMD);
 259                 slot->host->state = STATE_SENDING_CMD11;
 260
 261                 /*
 262                  * We need to disable low power mode (automatic clock stop)
 263                  * while doing voltage switch so we don't confuse the card,
 264                  * since stopping the clock is a specific part of the UHS
 265                  * voltage change dance.
 266                  *
 267                  * Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
 268                  * unconditionally turned back on in dw_mci_setup_bus() if it's
 269                  * ever called with a non-zero clock.  That shouldn't happen
 270                  * until the voltage change is all done.
 271                  */
 272                 clk_en_a = mci_readl(host, CLKENA);
 273                 clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
 274                 mci_writel(host, CLKENA, clk_en_a);
 275                 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
 276                              SDMMC_CMD_PRV_DAT_WAIT, 0);
 277         }
 278
 279         if (cmd->flags & MMC_RSP_PRESENT) {
 280                 /* We expect a response, so set this bit */
 281                 cmdr |= SDMMC_CMD_RESP_EXP;
 282                 if (cmd->flags & MMC_RSP_136)
 283                         cmdr |= SDMMC_CMD_RESP_LONG;
 284         }
 285
 286         if (cmd->flags & MMC_RSP_CRC)
 287                 cmdr |= SDMMC_CMD_RESP_CRC;
 288
 289         data = cmd->data;
 290         if (data) {
 291                 cmdr |= SDMMC_CMD_DAT_EXP;
 292                 if (data->flags & MMC_DATA_WRITE)
 293                         cmdr |= SDMMC_CMD_DAT_WR;
 294         }
 295
 296         if (!test_bit(DW_MMC_CARD_NO_USE_HOLD, &slot->flags))
 297                 cmdr |= SDMMC_CMD_USE_HOLD_REG;
 298
 299         return cmdr;
 300 }
 301
 302 static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 303 {
 304         struct mmc_command *stop;
 305         u32 cmdr;
 306
 307         if (!cmd->data)
 308                 return 0;
 309
 310         stop = &host->stop_abort;
 311         cmdr = cmd->opcode;
 312         memset(stop, 0, sizeof(struct mmc_command));
 313
 314         if (cmdr == MMC_READ_SINGLE_BLOCK ||
 315             cmdr == MMC_READ_MULTIPLE_BLOCK ||
 316             cmdr == MMC_WRITE_BLOCK ||
 317             cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
 318             cmdr == MMC_SEND_TUNING_BLOCK ||
 319             cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
 320                 stop->opcode = MMC_STOP_TRANSMISSION;
 321                 stop->arg = 0;
 322                 stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
 323         } else if (cmdr == SD_IO_RW_EXTENDED) {
 324                 stop->opcode = SD_IO_RW_DIRECT;
 325                 stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
 326                              ((cmd->arg >> 28) & 0x7);
 327                 stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 328         } else {
 329                 return 0;
 330         }
 331
 332         cmdr = stop->opcode | SDMMC_CMD_STOP |
 333                 SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
 334
 335         return cmdr;
 336 }
 337
 338 static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags)
 339 {
 340         unsigned long timeout = jiffies + msecs_to_jiffies(500);
 341
 342         /*
 343          * Databook says that before issuing a new data transfer command
 344          * we need to check to see if the card is busy.  Data transfer commands
 345          * all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that.
 346          *
 347          * ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is
 348          * expected.
 349          */
 350         if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) &&
 351             !(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) {
 352                 while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) {
 353                         if (time_after(jiffies, timeout)) {
 354                                 /* Command will fail; we'll pass error then */
 355                                 dev_err(host->dev, "Busy; trying anyway\n");
 356                                 break;
 357                         }
 358                         udelay(10);
 359                 }
 360         }
 361 }
 362
 363 static void dw_mci_start_command(struct dw_mci *host,
 364                                  struct mmc_command *cmd, u32 cmd_flags)
 365 {
 366         host->cmd = cmd;
 367         dev_vdbg(host->dev,
 368                  "start command: ARGR=0x%08x CMDR=0x%08x\n",
 369                  cmd->arg, cmd_flags);
 370
 371         mci_writel(host, CMDARG, cmd->arg);
 372         wmb(); /* drain writebuffer */
 373         dw_mci_wait_while_busy(host, cmd_flags);
 374
 375         mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
 376 }
 377
 378 static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
 379 {
 380         struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
 381
 382         dw_mci_start_command(host, stop, host->stop_cmdr);
 383 }
 384
 385 /* DMA interface functions */
 386 static void dw_mci_stop_dma(struct dw_mci *host)
 387 {
 388         if (host->using_dma) {
 389                 host->dma_ops->stop(host);
 390                 host->dma_ops->cleanup(host);
 391         }
 392
 393         /* Data transfer was stopped by the interrupt handler */
 394         set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 395 }
 396
 397 static int dw_mci_get_dma_dir(struct mmc_data *data)
 398 {
 399         if (data->flags & MMC_DATA_WRITE)
 400                 return DMA_TO_DEVICE;
 401         else
 402                 return DMA_FROM_DEVICE;
 403 }
 404
 405 static void dw_mci_dma_cleanup(struct dw_mci *host)
 406 {
 407         struct mmc_data *data = host->data;
 408
 409         if (data)
 410                 if (!data->host_cookie)
 411                         dma_unmap_sg(host->dev,
 412                                      data->sg,
 413                                      data->sg_len,
 414                                      dw_mci_get_dma_dir(data));
 415 }
 416
 417 static void dw_mci_idmac_reset(struct dw_mci *host)
 418 {
 419         u32 bmod = mci_readl(host, BMOD);
 420         /* Software reset of DMA */
 421         bmod |= SDMMC_IDMAC_SWRESET;
 422         mci_writel(host, BMOD, bmod);
 423 }
 424
 425 static void dw_mci_idmac_stop_dma(struct dw_mci *host)
 426 {
 427         u32 temp;
 428
 429         /* Disable and reset the IDMAC interface */
 430         temp = mci_readl(host, CTRL);
 431         temp &= ~SDMMC_CTRL_USE_IDMAC;
 432         temp |= SDMMC_CTRL_DMA_RESET;
 433         mci_writel(host, CTRL, temp);
 434
 435         /* Stop the IDMAC running */
 436         temp = mci_readl(host, BMOD);
 437         temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
 438         temp |= SDMMC_IDMAC_SWRESET;
 439         mci_writel(host, BMOD, temp);
 440 }
 441
 442 static void dw_mci_dmac_complete_dma(void *arg)
 443 {
 444         struct dw_mci *host = arg;
 445         struct mmc_data *data = host->data;
 446
 447         dev_vdbg(host->dev, "DMA complete\n");
 448
 449         if ((host->use_dma == TRANS_MODE_EDMAC) &&
 450             data && (data->flags & MMC_DATA_READ))
 451                 /* Invalidate cache after read */
 452                 dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
 453                                     data->sg,
 454                                     data->sg_len,
 455                                     DMA_FROM_DEVICE);
 456
 457         host->dma_ops->cleanup(host);
 458
 459         /*
 460          * If the card was removed, data will be NULL. No point in trying to
 461          * send the stop command or waiting for NBUSY in this case.
 462          */
 463         if (data) {
 464                 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 465                 tasklet_schedule(&host->tasklet);
 466         }
 467 }
 468
 469 static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
 470                                     unsigned int sg_len)
 471 {
 472         unsigned int desc_len;
 473         int i;
 474
 475         if (host->dma_64bit_address == 1) {
 476                 struct idmac_desc_64addr *desc_first, *desc_last, *desc;
 477
 478                 desc_first = desc_last = desc = host->sg_cpu;
 479
 480                 for (i = 0; i < sg_len; i++) {
 481                         unsigned int length = sg_dma_len(&data->sg[i]);
 482
 483                         u64 mem_addr = sg_dma_address(&data->sg[i]);
 484
 485                         for ( ; length ; desc++) {
 486                                 desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
 487                                            length : DW_MCI_DESC_DATA_LENGTH;
 488
 489                                 length -= desc_len;
 490
 491                                 /*
 492                                  * Set the OWN bit and disable interrupts
 493                                  * for this descriptor
 494                                  */
 495                                 desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
 496                                                         IDMAC_DES0_CH;
 497
 498                                 /* Buffer length */
 499                                 IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, desc_len);
 500
 501                                 /* Physical address to DMA to/from */
 502                                 desc->des4 = mem_addr & 0xffffffff;
 503                                 desc->des5 = mem_addr >> 32;
 504
 505                                 /* Update physical address for the next desc */
 506                                 mem_addr += desc_len;
 507
 508                                 /* Save pointer to the last descriptor */
 509                                 desc_last = desc;
 510                         }
 511                 }
 512
 513                 /* Set first descriptor */
 514                 desc_first->des0 |= IDMAC_DES0_FD;
 515
 516                 /* Set last descriptor */
 517                 desc_last->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
 518                 desc_last->des0 |= IDMAC_DES0_LD;
 519
 520         } else {
 521                 struct idmac_desc *desc_first, *desc_last, *desc;
 522
 523                 desc_first = desc_last = desc = host->sg_cpu;
 524
 525                 for (i = 0; i < sg_len; i++) {
 526                         unsigned int length = sg_dma_len(&data->sg[i]);
 527
 528                         u32 mem_addr = sg_dma_address(&data->sg[i]);
 529
 530                         for ( ; length ; desc++) {
 531                                 desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
 532                                            length : DW_MCI_DESC_DATA_LENGTH;
 533
 534                                 length -= desc_len;
 535
 536                                 /*
 537                                  * Set the OWN bit and disable interrupts
 538                                  * for this descriptor
 539                                  */
 540                                 desc->des0 = cpu_to_le32(IDMAC_DES0_OWN |
 541                                                          IDMAC_DES0_DIC |
 542                                                          IDMAC_DES0_CH);
 543
 544                                 /* Buffer length */
 545                                 IDMAC_SET_BUFFER1_SIZE(desc, desc_len);
 546
 547                                 /* Physical address to DMA to/from */
 548                                 desc->des2 = cpu_to_le32(mem_addr);
 549
 550                                 /* Update physical address for the next desc */
 551                                 mem_addr += desc_len;
 552
 553                                 /* Save pointer to the last descriptor */
 554                                 desc_last = desc;
 555                         }
 556                 }
 557
 558                 /* Set first descriptor */
 559                 desc_first->des0 |= cpu_to_le32(IDMAC_DES0_FD);
 560
 561                 /* Set last descriptor */
 562                 desc_last->des0 &= cpu_to_le32(~(IDMAC_DES0_CH |
 563                                                IDMAC_DES0_DIC));
 564                 desc_last->des0 |= cpu_to_le32(IDMAC_DES0_LD);
 565         }
 566
 567         wmb(); /* drain writebuffer */
 568 }
 569
 570 static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
 571 {
 572         u32 temp;
 573
 574         dw_mci_translate_sglist(host, host->data, sg_len);
 575
 576         /* Make sure to reset DMA in case we did PIO before this */
 577         dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
 578         dw_mci_idmac_reset(host);
 579
 580         /* Select IDMAC interface */
 581         temp = mci_readl(host, CTRL);
 582         temp |= SDMMC_CTRL_USE_IDMAC;
 583         mci_writel(host, CTRL, temp);
 584
 585         /* drain writebuffer */
 586         wmb();
 587
 588         /* Enable the IDMAC */
 589         temp = mci_readl(host, BMOD);
 590         temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
 591         mci_writel(host, BMOD, temp);
 592
 593         /* Start it running */
 594         mci_writel(host, PLDMND, 1);
 595
 596         return 0;
 597 }
 598
 599 static int dw_mci_idmac_init(struct dw_mci *host)
 600 {
 601         int i;
 602
 603         if (host->dma_64bit_address == 1) {
 604                 struct idmac_desc_64addr *p;
 605                 /* Number of descriptors in the ring buffer */
 606                 host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
 607
 608                 /* Forward link the descriptor list */
 609                 for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
 610                                                                 i++, p++) {
 611                         p->des6 = (host->sg_dma +
 612                                         (sizeof(struct idmac_desc_64addr) *
 613                                                         (i + 1))) & 0xffffffff;
 614
 615                         p->des7 = (u64)(host->sg_dma +
 616                                         (sizeof(struct idmac_desc_64addr) *
 617                                                         (i + 1))) >> 32;
 618                         /* Initialize reserved and buffer size fields to "0" */
 619                         p->des1 = 0;
 620                         p->des2 = 0;
 621                         p->des3 = 0;
 622                 }
 623
 624                 /* Set the last descriptor as the end-of-ring descriptor */
 625                 p->des6 = host->sg_dma & 0xffffffff;
 626                 p->des7 = (u64)host->sg_dma >> 32;
 627                 p->des0 = IDMAC_DES0_ER;
 628
 629         } else {
 630                 struct idmac_desc *p;
 631                 /* Number of descriptors in the ring buffer */
 632                 host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
 633
 634                 /* Forward link the descriptor list */
 635                 for (i = 0, p = host->sg_cpu;
 636                      i < host->ring_size - 1;
 637                      i++, p++) {
 638                         p->des3 = cpu_to_le32(host->sg_dma +
 639                                         (sizeof(struct idmac_desc) * (i + 1)));
 640                         p->des1 = 0;
 641                 }
 642
 643                 /* Set the last descriptor as the end-of-ring descriptor */
 644                 p->des3 = cpu_to_le32(host->sg_dma);
 645                 p->des0 = cpu_to_le32(IDMAC_DES0_ER);
 646         }
 647
 648         dw_mci_idmac_reset(host);
 649
 650         if (host->dma_64bit_address == 1) {
 651                 /* Mask out interrupts - get Tx & Rx complete only */
 652                 mci_writel(host, IDSTS64, IDMAC_INT_CLR);
 653                 mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
 654                                 SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
 655
 656                 /* Set the descriptor base address */
 657                 mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
 658                 mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
 659
 660         } else {
 661                 /* Mask out interrupts - get Tx & Rx complete only */
 662                 mci_writel(host, IDSTS, IDMAC_INT_CLR);
 663                 mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
 664                                 SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
 665
 666                 /* Set the descriptor base address */
 667                 mci_writel(host, DBADDR, host->sg_dma);
 668         }
 669
 670         return 0;
 671 }
 672
 673 static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
 674         .init = dw_mci_idmac_init,
 675         .start = dw_mci_idmac_start_dma,
 676         .stop = dw_mci_idmac_stop_dma,
 677         .complete = dw_mci_dmac_complete_dma,
 678         .cleanup = dw_mci_dma_cleanup,
 679 };
 680
 681 static void dw_mci_edmac_stop_dma(struct dw_mci *host)
 682 {
 683         dmaengine_terminate_async(host->dms->ch);
 684 }
 685
 686 static int dw_mci_edmac_start_dma(struct dw_mci *host,
 687                                             unsigned int sg_len)
 688 {
 689         struct dma_slave_config cfg;
 690         struct dma_async_tx_descriptor *desc = NULL;
 691         struct scatterlist *sgl = host->data->sg;
 692         const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
 693         u32 sg_elems = host->data->sg_len;
 694         u32 fifoth_val;
 695         u32 fifo_offset = host->fifo_reg - host->regs;
 696         int ret = 0;
 697
 698         /* Set external dma config: burst size, burst width */
 699         cfg.dst_addr = host->phy_regs + fifo_offset;
 700         cfg.src_addr = cfg.dst_addr;
 701         cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 702         cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 703
 704         /* Match burst msize with external dma config */
 705         fifoth_val = mci_readl(host, FIFOTH);
 706         cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
 707         cfg.src_maxburst = cfg.dst_maxburst;
 708
 709         if (host->data->flags & MMC_DATA_WRITE)
 710                 cfg.direction = DMA_MEM_TO_DEV;
 711         else
 712                 cfg.direction = DMA_DEV_TO_MEM;
 713
 714         ret = dmaengine_slave_config(host->dms->ch, &cfg);
 715         if (ret) {
 716                 dev_err(host->dev, "Failed to config edmac.\n");
 717                 return -EBUSY;
 718         }
 719
 720         desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
 721                                        sg_len, cfg.direction,
 722                                        DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 723         if (!desc) {
 724                 dev_err(host->dev, "Can't prepare slave sg.\n");
 725                 return -EBUSY;
 726         }
 727
 728         /* Set dw_mci_dmac_complete_dma as callback */
 729         desc->callback = dw_mci_dmac_complete_dma;
 730         desc->callback_param = (void *)host;
 731         dmaengine_submit(desc);
 732
 733         /* Flush cache before write */
 734         if (host->data->flags & MMC_DATA_WRITE)
 735                 dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
 736                                        sg_elems, DMA_TO_DEVICE);
 737
 738         dma_async_issue_pending(host->dms->ch);
 739
 740         return 0;
 741 }
 742
 743 static int dw_mci_edmac_init(struct dw_mci *host)
 744 {
 745         /* Request external dma channel */
 746         host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
 747         if (!host->dms)
 748                 return -ENOMEM;
 749
 750         host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
 751         if (!host->dms->ch) {
 752                 dev_err(host->dev, "Failed to get external DMA channel.\n");
 753                 kfree(host->dms);
 754                 host->dms = NULL;
 755                 return -ENXIO;
 756         }
 757
 758         return 0;
 759 }
 760
 761 static void dw_mci_edmac_exit(struct dw_mci *host)
 762 {
 763         if (host->dms) {
 764                 if (host->dms->ch) {
 765                         dma_release_channel(host->dms->ch);
 766                         host->dms->ch = NULL;
 767                 }
 768                 kfree(host->dms);
 769                 host->dms = NULL;
 770         }
 771 }
 772
 773 static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
 774         .init = dw_mci_edmac_init,
 775         .exit = dw_mci_edmac_exit,
 776         .start = dw_mci_edmac_start_dma,
 777         .stop = dw_mci_edmac_stop_dma,
 778         .complete = dw_mci_dmac_complete_dma,
 779         .cleanup = dw_mci_dma_cleanup,
 780 };
 781
 782 static int dw_mci_pre_dma_transfer(struct dw_mci *host,
 783                                    struct mmc_data *data,
 784                                    bool next)
 785 {
 786         struct scatterlist *sg;
 787         unsigned int i, sg_len;
 788
 789         if (!next && data->host_cookie)
 790                 return data->host_cookie;
 791
 792         /*
 793          * We don't do DMA on "complex" transfers, i.e. with
 794          * non-word-aligned buffers or lengths. Also, we don't bother
 795          * with all the DMA setup overhead for short transfers.
 796          */
 797         if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
 798                 return -EINVAL;
 799
 800         if (data->blksz & 3)
 801                 return -EINVAL;
 802
 803         for_each_sg(data->sg, sg, data->sg_len, i) {
 804                 if (sg->offset & 3 || sg->length & 3)
 805                         return -EINVAL;
 806         }
 807
 808         sg_len = dma_map_sg(host->dev,
 809                             data->sg,
 810                             data->sg_len,
 811                             dw_mci_get_dma_dir(data));
 812         if (sg_len == 0)
 813                 return -EINVAL;
 814
 815         if (next)
 816                 data->host_cookie = sg_len;
 817
 818         return sg_len;
 819 }
 820
 821 static void dw_mci_pre_req(struct mmc_host *mmc,
 822                            struct mmc_request *mrq,
 823                            bool is_first_req)
 824 {
 825         struct dw_mci_slot *slot = mmc_priv(mmc);
 826         struct mmc_data *data = mrq->data;
 827
 828         if (!slot->host->use_dma || !data)
 829                 return;
 830
 831         if (data->host_cookie) {
 832                 data->host_cookie = 0;
 833                 return;
 834         }
 835
 836         if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
 837                 data->host_cookie = 0;
 838 }
 839
 840 static void dw_mci_post_req(struct mmc_host *mmc,
 841                             struct mmc_request *mrq,
 842                             int err)
 843 {
 844         struct dw_mci_slot *slot = mmc_priv(mmc);
 845         struct mmc_data *data = mrq->data;
 846
 847         if (!slot->host->use_dma || !data)
 848                 return;
 849
 850         if (data->host_cookie)
 851                 dma_unmap_sg(slot->host->dev,
 852                              data->sg,
 853                              data->sg_len,
 854                              dw_mci_get_dma_dir(data));
 855         data->host_cookie = 0;
 856 }
 857
 858 static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
 859 {
 860         unsigned int blksz = data->blksz;
 861         const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
 862         u32 fifo_width = 1 << host->data_shift;
 863         u32 blksz_depth = blksz / fifo_width, fifoth_val;
 864         u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
 865         int idx = ARRAY_SIZE(mszs) - 1;
 866
 867         /* pio should ship this scenario */
 868         if (!host->use_dma)
 869                 return;
 870
 871         tx_wmark = (host->fifo_depth) / 2;
 872         tx_wmark_invers = host->fifo_depth - tx_wmark;
 873
 874         /*
 875          * MSIZE is '1',
 876          * if blksz is not a multiple of the FIFO width
 877          */
 878         if (blksz % fifo_width) {
 879                 msize = 0;
 880                 rx_wmark = 1;
 881                 goto done;
 882         }
 883
 884         do {
 885                 if (!((blksz_depth % mszs[idx]) ||
 886                      (tx_wmark_invers % mszs[idx]))) {
 887                         msize = idx;
 888                         rx_wmark = mszs[idx] - 1;
 889                         break;
 890                 }
 891         } while (--idx > 0);
 892         /*
 893          * If idx is '0', it won't be tried
 894          * Thus, initial values are uesed
 895          */
 896 done:
 897         fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
 898         mci_writel(host, FIFOTH, fifoth_val);
 899 }
 900
 901 static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
 902 {
 903         unsigned int blksz = data->blksz;
 904         u32 blksz_depth, fifo_depth;
 905         u16 thld_size;
 906
 907         WARN_ON(!(data->flags & MMC_DATA_READ));
 908
 909         /*
 910          * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
 911          * in the FIFO region, so we really shouldn't access it).
 912          */
 913         if (host->verid < DW_MMC_240A)
 914                 return;
 915
 916         if (host->timing != MMC_TIMING_MMC_HS200 &&
 917             host->timing != MMC_TIMING_MMC_HS400 &&
 918             host->timing != MMC_TIMING_UHS_SDR104)
 919                 goto disable;
 920
 921         blksz_depth = blksz / (1 << host->data_shift);
 922         fifo_depth = host->fifo_depth;
 923
 924         if (blksz_depth > fifo_depth)
 925                 goto disable;
 926
 927         /*
 928          * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
 929          * If (blksz_depth) <  (fifo_depth >> 1), should be thld_size = blksz
 930          * Currently just choose blksz.
 931          */
 932         thld_size = blksz;
 933         mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
 934         return;
 935
 936 disable:
 937         mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
 938 }
 939
 940 static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 941 {
 942         unsigned long irqflags;
 943         int sg_len;
 944         u32 temp;
 945
 946         host->using_dma = 0;
 947
 948         /* If we don't have a channel, we can't do DMA */
 949         if (!host->use_dma)
 950                 return -ENODEV;
 951
 952         sg_len = dw_mci_pre_dma_transfer(host, data, 0);
 953         if (sg_len < 0) {
 954                 host->dma_ops->stop(host);
 955                 return sg_len;
 956         }
 957
 958         host->using_dma = 1;
 959
 960         if (host->use_dma == TRANS_MODE_IDMAC)
 961                 dev_vdbg(host->dev,
 962                          "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
 963                          (unsigned long)host->sg_cpu,
 964                          (unsigned long)host->sg_dma,
 965                          sg_len);
 966
 967         /*
 968          * Decide the MSIZE and RX/TX Watermark.
 969          * If current block size is same with previous size,
 970          * no need to update fifoth.
 971          */
 972         if (host->prev_blksz != data->blksz)
 973                 dw_mci_adjust_fifoth(host, data);
 974
 975         /* Enable the DMA interface */
 976         temp = mci_readl(host, CTRL);
 977         temp |= SDMMC_CTRL_DMA_ENABLE;
 978         mci_writel(host, CTRL, temp);
 979
 980         /* Disable RX/TX IRQs, let DMA handle it */
 981         spin_lock_irqsave(&host->irq_lock, irqflags);
 982         temp = mci_readl(host, INTMASK);
 983         temp  &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
 984         mci_writel(host, INTMASK, temp);
 985         spin_unlock_irqrestore(&host->irq_lock, irqflags);
 986
 987         if (host->dma_ops->start(host, sg_len)) {
 988                 /* We can't do DMA */
 989                 dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
 990                 return -ENODEV;
 991         }
 992
 993         return 0;
 994 }
 995
 996 static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 997 {
 998         unsigned long irqflags;
 999         int flags = SG_MITER_ATOMIC;
1000         u32 temp;
1001
1002         data->error = -EINPROGRESS;
1003
1004         WARN_ON(host->data);
1005         host->sg = NULL;
1006         host->data = data;
1007
1008         if (data->flags & MMC_DATA_READ) {
1009                 host->dir_status = DW_MCI_RECV_STATUS;
1010                 dw_mci_ctrl_rd_thld(host, data);
1011         } else {
1012                 host->dir_status = DW_MCI_SEND_STATUS;
1013         }
1014
1015         if (dw_mci_submit_data_dma(host, data)) {
1016                 if (host->data->flags & MMC_DATA_READ)
1017                         flags |= SG_MITER_TO_SG;
1018                 else
1019                         flags |= SG_MITER_FROM_SG;
1020
1021                 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
1022                 host->sg = data->sg;
1023                 host->part_buf_start = 0;
1024                 host->part_buf_count = 0;
1025
1026                 mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
1027
1028                 spin_lock_irqsave(&host->irq_lock, irqflags);
1029                 temp = mci_readl(host, INTMASK);
1030                 temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
1031                 mci_writel(host, INTMASK, temp);
1032                 spin_unlock_irqrestore(&host->irq_lock, irqflags);
1033
1034                 temp = mci_readl(host, CTRL);
1035                 temp &= ~SDMMC_CTRL_DMA_ENABLE;
1036                 mci_writel(host, CTRL, temp);
1037
1038                 /*
1039                  * Use the initial fifoth_val for PIO mode.
1040                  * If next issued data may be transfered by DMA mode,
1041                  * prev_blksz should be invalidated.
1042                  */
1043                 mci_writel(host, FIFOTH, host->fifoth_val);
1044                 host->prev_blksz = 0;
1045         } else {
1046                 /*
1047                  * Keep the current block size.
1048                  * It will be used to decide whether to update
1049                  * fifoth register next time.
1050                  */
1051                 host->prev_blksz = data->blksz;
1052         }
1053 }
1054
1055 static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
1056 {
1057         struct dw_mci *host = slot->host;
1058         unsigned long timeout = jiffies + msecs_to_jiffies(500);
1059         unsigned int cmd_status = 0;
1060
1061         mci_writel(host, CMDARG, arg);
1062         wmb(); /* drain writebuffer */
1063         dw_mci_wait_while_busy(host, cmd);
1064         mci_writel(host, CMD, SDMMC_CMD_START | cmd);
1065
1066         while (time_before(jiffies, timeout)) {
1067                 cmd_status = mci_readl(host, CMD);
1068                 if (!(cmd_status & SDMMC_CMD_START))
1069                         return;
1070         }
1071         dev_err(&slot->mmc->class_dev,
1072                 "Timeout sending command (cmd %#x arg %#x status %#x)\n",
1073                 cmd, arg, cmd_status);
1074 }
1075
1076 static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
1077 {
1078         struct dw_mci *host = slot->host;
1079         unsigned int clock = slot->clock;
1080         u32 div;
1081         u32 clk_en_a;
1082         u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
1083
1084         /* We must continue to set bit 28 in CMD until the change is complete */
1085         if (host->state == STATE_WAITING_CMD11_DONE)
1086                 sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
1087
1088         if (!clock) {
1089                 mci_writel(host, CLKENA, 0);
1090                 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1091         } else if (clock != host->current_speed || force_clkinit) {
1092                 div = host->bus_hz / clock;
1093                 if (host->bus_hz % clock && host->bus_hz > clock)
1094                         /*
1095                          * move the + 1 after the divide to prevent
1096                          * over-clocking the card.
1097                          */
1098                         div += 1;
1099
1100                 div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
1101
1102                 if ((clock << div) != slot->__clk_old || force_clkinit)
1103                         dev_info(&slot->mmc->class_dev,
1104                                  "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
1105                                  slot->id, host->bus_hz, clock,
1106                                  div ? ((host->bus_hz / div) >> 1) :
1107                                  host->bus_hz, div);
1108
1109                 /* disable clock */
1110                 mci_writel(host, CLKENA, 0);
1111                 mci_writel(host, CLKSRC, 0);
1112
1113                 /* inform CIU */
1114                 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1115
1116                 /* set clock to desired speed */
1117                 mci_writel(host, CLKDIV, div);
1118
1119                 /* inform CIU */
1120                 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1121
1122                 /* enable clock; only low power if no SDIO */
1123                 clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
1124                 if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags))
1125                         clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
1126                 mci_writel(host, CLKENA, clk_en_a);
1127
1128                 /* inform CIU */
1129                 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1130
1131                 /* keep the clock with reflecting clock dividor */
1132                 slot->__clk_old = clock << div;
1133         }
1134
1135         host->current_speed = clock;
1136
1137         /* Set the current slot bus width */
1138         mci_writel(host, CTYPE, (slot->ctype << slot->id));
1139 }
1140
1141 static void __dw_mci_start_request(struct dw_mci *host,
1142                                    struct dw_mci_slot *slot,
1143                                    struct mmc_command *cmd)
1144 {
1145         struct mmc_request *mrq;
1146         struct mmc_data *data;
1147         u32 cmdflags;
1148
1149         mrq = slot->mrq;
1150
1151         host->cur_slot = slot;
1152         host->mrq = mrq;
1153
1154         host->pending_events = 0;
1155         host->completed_events = 0;
1156         host->cmd_status = 0;
1157         host->data_status = 0;
1158         host->dir_status = 0;
1159
1160         data = cmd->data;
1161         if (data) {
1162                 mci_writel(host, TMOUT, 0xFFFFFFFF);
1163                 mci_writel(host, BYTCNT, data->blksz*data->blocks);
1164                 mci_writel(host, BLKSIZ, data->blksz);
1165         }
1166
1167         cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
1168
1169         /* this is the first command, send the initialization clock */
1170         if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
1171                 cmdflags |= SDMMC_CMD_INIT;
1172
1173         if (data) {
1174                 dw_mci_submit_data(host, data);
1175                 wmb(); /* drain writebuffer */
1176         }
1177
1178         dw_mci_start_command(host, cmd, cmdflags);
1179
1180         if (cmd->opcode == SD_SWITCH_VOLTAGE) {
1181                 unsigned long irqflags;
1182
1183                 /*
1184                  * Databook says to fail after 2ms w/ no response, but evidence
1185                  * shows that sometimes the cmd11 interrupt takes over 130ms.
1186                  * We'll set to 500ms, plus an extra jiffy just in case jiffies
1187                  * is just about to roll over.
1188                  *
1189                  * We do this whole thing under spinlock and only if the
1190                  * command hasn't already completed (indicating the the irq
1191                  * already ran so we don't want the timeout).
1192                  */
1193                 spin_lock_irqsave(&host->irq_lock, irqflags);
1194                 if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
1195                         mod_timer(&host->cmd11_timer,
1196                                 jiffies + msecs_to_jiffies(500) + 1);
1197                 spin_unlock_irqrestore(&host->irq_lock, irqflags);
1198         }
1199
1200         if (mrq->stop)
1201                 host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
1202         else
1203                 host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
1204 }
1205
1206 static void dw_mci_start_request(struct dw_mci *host,
1207                                  struct dw_mci_slot *slot)
1208 {
1209         struct mmc_request *mrq = slot->mrq;
1210         struct mmc_command *cmd;
1211
1212         cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
1213         __dw_mci_start_request(host, slot, cmd);
1214 }
1215
1216 /* must be called with host->lock held */
1217 static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
1218                                  struct mmc_request *mrq)
1219 {
1220         dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
1221                  host->state);
1222
1223         slot->mrq = mrq;
1224
1225         if (host->state == STATE_WAITING_CMD11_DONE) {
1226                 dev_warn(&slot->mmc->class_dev,
1227                          "Voltage change didn't complete\n");
1228                 /*
1229                  * this case isn't expected to happen, so we can
1230                  * either crash here or just try to continue on
1231                  * in the closest possible state
1232                  */
1233                 host->state = STATE_IDLE;
1234         }
1235
1236         if (host->state == STATE_IDLE) {
1237                 host->state = STATE_SENDING_CMD;
1238                 dw_mci_start_request(host, slot);
1239         } else {
1240                 list_add_tail(&slot->queue_node, &host->queue);
1241         }
1242 }
1243
1244 static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1245 {
1246         struct dw_mci_slot *slot = mmc_priv(mmc);
1247         struct dw_mci *host = slot->host;
1248
1249         WARN_ON(slot->mrq);
1250
1251         /*
1252          * The check for card presence and queueing of the request must be
1253          * atomic, otherwise the card could be removed in between and the
1254          * request wouldn't fail until another card was inserted.
1255          */
1256         spin_lock_bh(&host->lock);
1257
1258         if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
1259                 spin_unlock_bh(&host->lock);
1260                 mrq->cmd->error = -ENOMEDIUM;
1261                 mmc_request_done(mmc, mrq);
1262                 return;
1263         }
1264
1265         dw_mci_queue_request(host, slot, mrq);
1266
1267         spin_unlock_bh(&host->lock);
1268 }
1269
1270 static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1271 {
1272         struct dw_mci_slot *slot = mmc_priv(mmc);
1273         const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
1274         u32 regs;
1275         int ret;
1276
1277         switch (ios->bus_width) {
1278         case MMC_BUS_WIDTH_4:
1279                 slot->ctype = SDMMC_CTYPE_4BIT;
1280                 break;
1281         case MMC_BUS_WIDTH_8:
1282                 slot->ctype = SDMMC_CTYPE_8BIT;
1283                 break;
1284         default:
1285                 /* set default 1 bit mode */
1286                 slot->ctype = SDMMC_CTYPE_1BIT;
1287         }
1288
1289         regs = mci_readl(slot->host, UHS_REG);
1290
1291         /* DDR mode set */
1292         if (ios->timing == MMC_TIMING_MMC_DDR52 ||
1293             ios->timing == MMC_TIMING_UHS_DDR50 ||
1294             ios->timing == MMC_TIMING_MMC_HS400)
1295                 regs |= ((0x1 << slot->id) << 16);
1296         else
1297                 regs &= ~((0x1 << slot->id) << 16);
1298
1299         mci_writel(slot->host, UHS_REG, regs);
1300         slot->host->timing = ios->timing;
1301
1302         /*
1303          * Use mirror of ios->clock to prevent race with mmc
1304          * core ios update when finding the minimum.
1305          */
1306         slot->clock = ios->clock;
1307
1308         if (drv_data && drv_data->set_ios)
1309                 drv_data->set_ios(slot->host, ios);
1310
1311         switch (ios->power_mode) {
1312         case MMC_POWER_UP:
1313                 if (!IS_ERR(mmc->supply.vmmc)) {
1314                         ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
1315                                         ios->vdd);
1316                         if (ret) {
1317                                 dev_err(slot->host->dev,
1318                                         "failed to enable vmmc regulator\n");
1319                                 /*return, if failed turn on vmmc*/
1320                                 return;
1321                         }
1322                 }
1323                 set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
1324                 regs = mci_readl(slot->host, PWREN);
1325                 regs |= (1 << slot->id);
1326                 mci_writel(slot->host, PWREN, regs);
1327                 break;
1328         case MMC_POWER_ON:
1329                 if (!slot->host->vqmmc_enabled) {
1330                         if (!IS_ERR(mmc->supply.vqmmc)) {
1331                                 ret = regulator_enable(mmc->supply.vqmmc);
1332                                 if (ret < 0)
1333                                         dev_err(slot->host->dev,
1334                                                 "failed to enable vqmmc\n");
1335                                 else
1336                                         slot->host->vqmmc_enabled = true;
1337
1338                         } else {
1339                                 /* Keep track so we don't reset again */
1340                                 slot->host->vqmmc_enabled = true;
1341                         }
1342
1343                         /* Reset our state machine after powering on */
1344                         dw_mci_ctrl_reset(slot->host,
1345                                           SDMMC_CTRL_ALL_RESET_FLAGS);
1346                 }
1347
1348                 /* Adjust clock / bus width after power is up */
1349                 dw_mci_setup_bus(slot, false);
1350
1351                 break;
1352         case MMC_POWER_OFF:
1353                 /* Turn clock off before power goes down */
1354                 dw_mci_setup_bus(slot, false);
1355
1356                 if (!IS_ERR(mmc->supply.vmmc))
1357                         mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
1358
1359                 if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
1360                         regulator_disable(mmc->supply.vqmmc);
1361                 slot->host->vqmmc_enabled = false;
1362
1363                 regs = mci_readl(slot->host, PWREN);
1364                 regs &= ~(1 << slot->id);
1365                 mci_writel(slot->host, PWREN, regs);
1366                 break;
1367         default:
1368                 break;
1369         }
1370
1371         if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
1372                 slot->host->state = STATE_IDLE;
1373 }
1374
1375 static int dw_mci_card_busy(struct mmc_host *mmc)
1376 {
1377         struct dw_mci_slot *slot = mmc_priv(mmc);
1378         u32 status;
1379
1380         /*
1381          * Check the busy bit which is low when DAT[3:0]
1382          * (the data lines) are 0000
1383          */
1384         status = mci_readl(slot->host, STATUS);
1385
1386         return !!(status & SDMMC_STATUS_BUSY);
1387 }
1388
1389 static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
1390 {
1391         struct dw_mci_slot *slot = mmc_priv(mmc);
1392         struct dw_mci *host = slot->host;
1393         const struct dw_mci_drv_data *drv_data = host->drv_data;
1394         u32 uhs;
1395         u32 v18 = SDMMC_UHS_18V << slot->id;
1396         int ret;
1397
1398         if (drv_data && drv_data->switch_voltage)
1399                 return drv_data->switch_voltage(mmc, ios);
1400
1401         /*
1402          * Program the voltage.  Note that some instances of dw_mmc may use
1403          * the UHS_REG for this.  For other instances (like exynos) the UHS_REG
1404          * does no harm but you need to set the regulator directly.  Try both.
1405          */
1406         uhs = mci_readl(host, UHS_REG);
1407         if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1408                 uhs &= ~v18;
1409         else
1410                 uhs |= v18;
1411
1412         if (!IS_ERR(mmc->supply.vqmmc)) {
1413                 ret = mmc_regulator_set_vqmmc(mmc, ios);
1414
1415                 if (ret) {
1416                         dev_dbg(&mmc->class_dev,
1417                                          "Regulator set error %d - %s V\n",
1418                                          ret, uhs & v18 ? "1.8" : "3.3");
1419                         return ret;
1420                 }
1421         }
1422         mci_writel(host, UHS_REG, uhs);
1423
1424         return 0;
1425 }
1426
1427 static int dw_mci_get_ro(struct mmc_host *mmc)
1428 {
1429         int read_only;
1430         struct dw_mci_slot *slot = mmc_priv(mmc);
1431         int gpio_ro = mmc_gpio_get_ro(mmc);
1432
1433         /* Use platform get_ro function, else try on board write protect */
1434         if (gpio_ro >= 0)
1435                 read_only = gpio_ro;
1436         else
1437                 read_only =
1438                         mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
1439
1440         dev_dbg(&mmc->class_dev, "card is %s\n",
1441                 read_only ? "read-only" : "read-write");
1442
1443         return read_only;
1444 }
1445
1446 static int dw_mci_get_cd(struct mmc_host *mmc)
1447 {
1448         int present;
1449         struct dw_mci_slot *slot = mmc_priv(mmc);
1450         struct dw_mci *host = slot->host;
1451         int gpio_cd = mmc_gpio_get_cd(mmc);
1452
1453         /* Use platform get_cd function, else try onboard card detect */
1454         if ((mmc->caps & MMC_CAP_NEEDS_POLL) || !mmc_card_is_removable(mmc))
1455                 present = 1;
1456         else if (gpio_cd >= 0)
1457                 present = gpio_cd;
1458         else
1459                 present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
1460                         == 0 ? 1 : 0;
1461
1462         spin_lock_bh(&host->lock);
1463         if (present) {
1464                 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1465                 dev_dbg(&mmc->class_dev, "card is present\n");
1466         } else {
1467                 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1468                 dev_dbg(&mmc->class_dev, "card is not present\n");
1469         }
1470         spin_unlock_bh(&host->lock);
1471
1472         return present;
1473 }
1474
1475 static void dw_mci_hw_reset(struct mmc_host *mmc)
1476 {
1477         struct dw_mci_slot *slot = mmc_priv(mmc);
1478         struct dw_mci *host = slot->host;
1479         int reset;
1480
1481         if (host->use_dma == TRANS_MODE_IDMAC)
1482                 dw_mci_idmac_reset(host);
1483
1484         if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET |
1485                                      SDMMC_CTRL_FIFO_RESET))
1486                 return;
1487
1488         /*
1489          * According to eMMC spec, card reset procedure:
1490          * tRstW >= 1us:   RST_n pulse width
1491          * tRSCA >= 200us: RST_n to Command time
1492          * tRSTH >= 1us:   RST_n high period
1493          */
1494         reset = mci_readl(host, RST_N);
1495         reset &= ~(SDMMC_RST_HWACTIVE << slot->id);
1496         mci_writel(host, RST_N, reset);
1497         usleep_range(1, 2);
1498         reset |= SDMMC_RST_HWACTIVE << slot->id;
1499         mci_writel(host, RST_N, reset);
1500         usleep_range(200, 300);
1501 }
1502
1503 static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
1504 {
1505         struct dw_mci_slot *slot = mmc_priv(mmc);
1506         struct dw_mci *host = slot->host;
1507
1508         /*
1509          * Low power mode will stop the card clock when idle.  According to the
1510          * description of the CLKENA register we should disable low power mode
1511          * for SDIO cards if we need SDIO interrupts to work.
1512          */
1513         if (mmc->caps & MMC_CAP_SDIO_IRQ) {
1514                 const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
1515                 u32 clk_en_a_old;
1516                 u32 clk_en_a;
1517
1518                 clk_en_a_old = mci_readl(host, CLKENA);
1519
1520                 if (card->type == MMC_TYPE_SDIO ||
1521                     card->type == MMC_TYPE_SD_COMBO) {
1522                         set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
1523                         clk_en_a = clk_en_a_old & ~clken_low_pwr;
1524                 } else {
1525                         clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
1526                         clk_en_a = clk_en_a_old | clken_low_pwr;
1527                 }
1528
1529                 if (clk_en_a != clk_en_a_old) {
1530                         mci_writel(host, CLKENA, clk_en_a);
1531                         mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
1532                                      SDMMC_CMD_PRV_DAT_WAIT, 0);
1533                 }
1534         }
1535 }
1536
1537 static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
1538 {
1539         struct dw_mci_slot *slot = mmc_priv(mmc);
1540         struct dw_mci *host = slot->host;
1541         unsigned long irqflags;
1542         u32 int_mask;
1543
1544         spin_lock_irqsave(&host->irq_lock, irqflags);
1545
1546         /* Enable/disable Slot Specific SDIO interrupt */
1547         int_mask = mci_readl(host, INTMASK);
1548         if (enb)
1549                 int_mask |= SDMMC_INT_SDIO(slot->sdio_id);
1550         else
1551                 int_mask &= ~SDMMC_INT_SDIO(slot->sdio_id);
1552         mci_writel(host, INTMASK, int_mask);
1553
1554         spin_unlock_irqrestore(&host->irq_lock, irqflags);
1555 }
1556
1557 static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1558 {
1559         struct dw_mci_slot *slot = mmc_priv(mmc);
1560         struct dw_mci *host = slot->host;
1561         const struct dw_mci_drv_data *drv_data = host->drv_data;
1562         int err = -EINVAL;
1563
1564         if (drv_data && drv_data->execute_tuning)
1565                 err = drv_data->execute_tuning(slot, opcode);
1566         return err;
1567 }
1568
1569 static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc,
1570                                        struct mmc_ios *ios)
1571 {
1572         struct dw_mci_slot *slot = mmc_priv(mmc);
1573         struct dw_mci *host = slot->host;
1574         const struct dw_mci_drv_data *drv_data = host->drv_data;
1575
1576         if (drv_data && drv_data->prepare_hs400_tuning)
1577                 return drv_data->prepare_hs400_tuning(host, ios);
1578
1579         return 0;
1580 }
1581
1582 static const struct mmc_host_ops dw_mci_ops = {
1583         .request                = dw_mci_request,
1584         .pre_req                = dw_mci_pre_req,
1585         .post_req               = dw_mci_post_req,
1586         .set_ios                = dw_mci_set_ios,
1587         .get_ro                 = dw_mci_get_ro,
1588         .get_cd                 = dw_mci_get_cd,
1589         .hw_reset               = dw_mci_hw_reset,
1590         .enable_sdio_irq        = dw_mci_enable_sdio_irq,
1591         .execute_tuning         = dw_mci_execute_tuning,
1592         .card_busy              = dw_mci_card_busy,
1593         .start_signal_voltage_switch = dw_mci_switch_voltage,
1594         .init_card              = dw_mci_init_card,
1595         .prepare_hs400_tuning   = dw_mci_prepare_hs400_tuning,
1596 };
1597
1598 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
1599         __releases(&host->lock)
1600         __acquires(&host->lock)
1601 {
1602         struct dw_mci_slot *slot;
1603         struct mmc_host *prev_mmc = host->cur_slot->mmc;
1604
1605         WARN_ON(host->cmd || host->data);
1606
1607         host->cur_slot->mrq = NULL;
1608         host->mrq = NULL;
1609         if (!list_empty(&host->queue)) {
1610                 slot = list_entry(host->queue.next,
1611                                   struct dw_mci_slot, queue_node);
1612                 list_del(&slot->queue_node);
1613                 dev_vdbg(host->dev, "list not empty: %s is next\n",
1614                          mmc_hostname(slot->mmc));
1615                 host->state = STATE_SENDING_CMD;
1616                 dw_mci_start_request(host, slot);
1617         } else {
1618                 dev_vdbg(host->dev, "list empty\n");
1619
1620                 if (host->state == STATE_SENDING_CMD11)
1621                         host->state = STATE_WAITING_CMD11_DONE;
1622                 else
1623                         host->state = STATE_IDLE;
1624         }
1625
1626         spin_unlock(&host->lock);
1627         mmc_request_done(prev_mmc, mrq);
1628         spin_lock(&host->lock);
1629 }
1630
1631 static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
1632 {
1633         u32 status = host->cmd_status;
1634
1635         host->cmd_status = 0;
1636
1637         /* Read the response from the card (up to 16 bytes) */
1638         if (cmd->flags & MMC_RSP_PRESENT) {
1639                 if (cmd->flags & MMC_RSP_136) {
1640                         cmd->resp[3] = mci_readl(host, RESP0);
1641                         cmd->resp[2] = mci_readl(host, RESP1);
1642                         cmd->resp[1] = mci_readl(host, RESP2);
1643                         cmd->resp[0] = mci_readl(host, RESP3);
1644                 } else {
1645                         cmd->resp[0] = mci_readl(host, RESP0);
1646                         cmd->resp[1] = 0;
1647                         cmd->resp[2] = 0;
1648                         cmd->resp[3] = 0;
1649                 }
1650         }
1651
1652         if (status & SDMMC_INT_RTO)
1653                 cmd->error = -ETIMEDOUT;
1654         else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
1655                 cmd->error = -EILSEQ;
1656         else if (status & SDMMC_INT_RESP_ERR)
1657                 cmd->error = -EIO;
1658         else
1659                 cmd->error = 0;
1660
1661         return cmd->error;
1662 }
1663
1664 static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
1665 {
1666         u32 status = host->data_status;
1667
1668         if (status & DW_MCI_DATA_ERROR_FLAGS) {
1669                 if (status & SDMMC_INT_DRTO) {
1670                         data->error = -ETIMEDOUT;
1671                 } else if (status & SDMMC_INT_DCRC) {
1672                         data->error = -EILSEQ;
1673                 } else if (status & SDMMC_INT_EBE) {
1674                         if (host->dir_status ==
1675                                 DW_MCI_SEND_STATUS) {
1676                                 /*
1677                                  * No data CRC status was returned.
1678                                  * The number of bytes transferred
1679                                  * will be exaggerated in PIO mode.
1680                                  */
1681                                 data->bytes_xfered = 0;
1682                                 data->error = -ETIMEDOUT;
1683                         } else if (host->dir_status ==
1684                                         DW_MCI_RECV_STATUS) {
1685                                 data->error = -EIO;
1686                         }
1687                 } else {
1688                         /* SDMMC_INT_SBE is included */
1689                         data->error = -EIO;
1690                 }
1691
1692                 dev_dbg(host->dev, "data error, status 0x%08x\n", status);
1693
1694                 /*
1695                  * After an error, there may be data lingering
1696                  * in the FIFO
1697                  */
1698                 dw_mci_reset(host);
1699         } else {
1700                 data->bytes_xfered = data->blocks * data->blksz;
1701                 data->error = 0;
1702         }
1703
1704         return data->error;
1705 }
1706
1707 static void dw_mci_set_drto(struct dw_mci *host)
1708 {
1709         unsigned int drto_clks;
1710         unsigned int drto_ms;
1711
1712         drto_clks = mci_readl(host, TMOUT) >> 8;
1713         drto_ms = DIV_ROUND_UP(drto_clks, host->bus_hz / 1000);
1714
1715         /* add a bit spare time */
1716         drto_ms += 10;
1717
1718         mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms));
1719 }
1720
1721 static void dw_mci_tasklet_func(unsigned long priv)
1722 {
1723         struct dw_mci *host = (struct dw_mci *)priv;
1724         struct mmc_data *data;
1725         struct mmc_command *cmd;
1726         struct mmc_request *mrq;
1727         enum dw_mci_state state;
1728         enum dw_mci_state prev_state;
1729         unsigned int err;
1730
1731         spin_lock(&host->lock);
1732
1733         state = host->state;
1734         data = host->data;
1735         mrq = host->mrq;
1736
1737         do {
1738                 prev_state = state;
1739
1740                 switch (state) {
1741                 case STATE_IDLE:
1742                 case STATE_WAITING_CMD11_DONE:
1743                         break;
1744
1745                 case STATE_SENDING_CMD11:
1746                 case STATE_SENDING_CMD:
1747                         if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
1748                                                 &host->pending_events))
1749                                 break;
1750
1751                         cmd = host->cmd;
1752                         host->cmd = NULL;
1753                         set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
1754                         err = dw_mci_command_complete(host, cmd);
1755                         if (cmd == mrq->sbc && !err) {
1756                                 prev_state = state = STATE_SENDING_CMD;
1757                                 __dw_mci_start_request(host, host->cur_slot,
1758                                                        mrq->cmd);
1759                                 goto unlock;
1760                         }
1761
1762                         if (cmd->data && err) {
1763                                 dw_mci_stop_dma(host);
1764                                 send_stop_abort(host, data);
1765                                 state = STATE_SENDING_STOP;
1766                                 break;
1767                         }
1768
1769                         if (!cmd->data || err) {
1770                                 dw_mci_request_end(host, mrq);
1771                                 goto unlock;
1772                         }
1773
1774                         prev_state = state = STATE_SENDING_DATA;
1775                         /* fall through */
1776
1777                 case STATE_SENDING_DATA:
1778                         /*
1779                          * We could get a data error and never a transfer
1780                          * complete so we'd better check for it here.
1781                          *
1782                          * Note that we don't really care if we also got a
1783                          * transfer complete; stopping the DMA and sending an
1784                          * abort won't hurt.
1785                          */
1786                         if (test_and_clear_bit(EVENT_DATA_ERROR,
1787                                                &host->pending_events)) {
1788                                 dw_mci_stop_dma(host);
1789                                 if (data->stop ||
1790                                     !(host->data_status & (SDMMC_INT_DRTO |
1791                                                            SDMMC_INT_EBE)))
1792                                         send_stop_abort(host, data);
1793                                 state = STATE_DATA_ERROR;
1794                                 break;
1795                         }
1796
1797                         if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
1798                                                 &host->pending_events)) {
1799                                 /*
1800                                  * If all data-related interrupts don't come
1801                                  * within the given time in reading data state.
1802                                  */
1803                                 if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
1804                                     (host->dir_status == DW_MCI_RECV_STATUS))
1805                                         dw_mci_set_drto(host);
1806                                 break;
1807                         }
1808
1809                         set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
1810
1811                         /*
1812                          * Handle an EVENT_DATA_ERROR that might have shown up
1813                          * before the transfer completed.  This might not have
1814                          * been caught by the check above because the interrupt
1815                          * could have gone off between the previous check and
1816                          * the check for transfer complete.
1817                          *
1818                          * Technically this ought not be needed assuming we
1819                          * get a DATA_COMPLETE eventually (we'll notice the
1820                          * error and end the request), but it shouldn't hurt.
1821                          *
1822                          * This has the advantage of sending the stop command.
1823                          */
1824                         if (test_and_clear_bit(EVENT_DATA_ERROR,
1825                                                &host->pending_events)) {
1826                                 dw_mci_stop_dma(host);
1827                                 if (data->stop ||
1828                                     !(host->data_status & (SDMMC_INT_DRTO |
1829                                                            SDMMC_INT_EBE)))
1830                                         send_stop_abort(host, data);
1831                                 state = STATE_DATA_ERROR;
1832                                 break;
1833                         }
1834                         prev_state = state = STATE_DATA_BUSY;
1835
1836                         /* fall through */
1837
1838                 case STATE_DATA_BUSY:
1839                         if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
1840                                                 &host->pending_events)) {
1841                                 /*
1842                                  * If data error interrupt comes but data over
1843                                  * interrupt doesn't come within the given time.
1844                                  * in reading data state.
1845                                  */
1846                                 if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
1847                                     (host->dir_status == DW_MCI_RECV_STATUS))
1848                                         dw_mci_set_drto(host);
1849                                 break;
1850                         }
1851
1852                         host->data = NULL;
1853                         set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
1854                         err = dw_mci_data_complete(host, data);
1855
1856                         if (!err) {
1857                                 if (!data->stop || mrq->sbc) {
1858                                         if (mrq->sbc && data->stop)
1859                                                 data->stop->error = 0;
1860                                         dw_mci_request_end(host, mrq);
1861                                         goto unlock;
1862                                 }
1863
1864                                 /* stop command for open-ended transfer*/
1865                                 if (data->stop)
1866                                         send_stop_abort(host, data);
1867                         } else {
1868                                 /*
1869                                  * If we don't have a command complete now we'll
1870                                  * never get one since we just reset everything;
1871                                  * better end the request.
1872                                  *
1873                                  * If we do have a command complete we'll fall
1874                                  * through to the SENDING_STOP command and
1875                                  * everything will be peachy keen.
1876                                  */
1877                                 if (!test_bit(EVENT_CMD_COMPLETE,
1878                                               &host->pending_events)) {
1879                                         host->cmd = NULL;
1880                                         dw_mci_request_end(host, mrq);
1881                                         goto unlock;
1882                                 }
1883                         }
1884
1885                         /*
1886                          * If err has non-zero,
1887                          * stop-abort command has been already issued.
1888                          */
1889                         prev_state = state = STATE_SENDING_STOP;
1890
1891                         /* fall through */
1892
1893                 case STATE_SENDING_STOP:
1894                         if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
1895                                                 &host->pending_events))
1896                                 break;
1897
1898                         /* CMD error in data command */
1899                         if (mrq->cmd->error && mrq->data)
1900                                 dw_mci_reset(host);
1901
1902                         host->cmd = NULL;
1903                         host->data = NULL;
1904
1905                         if (mrq->stop)
1906                                 dw_mci_command_complete(host, mrq->stop);
1907                         else
1908                                 host->cmd_status = 0;
1909
1910                         dw_mci_request_end(host, mrq);
1911                         goto unlock;
1912
1913                 case STATE_DATA_ERROR:
1914                         if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
1915                                                 &host->pending_events))
1916                                 break;
1917
1918                         state = STATE_DATA_BUSY;
1919                         break;
1920                 }
1921         } while (state != prev_state);
1922
1923         host->state = state;
1924 unlock:
1925         spin_unlock(&host->lock);
1926
1927 }
1928
1929 /* push final bytes to part_buf, only use during push */
1930 static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
1931 {
1932         memcpy((void *)&host->part_buf, buf, cnt);
1933         host->part_buf_count = cnt;
1934 }
1935
1936 /* append bytes to part_buf, only use during push */
1937 static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
1938 {
1939         cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
1940         memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
1941         host->part_buf_count += cnt;
1942         return cnt;
1943 }
1944
1945 /* pull first bytes from part_buf, only use during pull */
1946 static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
1947 {
1948         cnt = min_t(int, cnt, host->part_buf_count);
1949         if (cnt) {
1950                 memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
1951                        cnt);
1952                 host->part_buf_count -= cnt;
1953                 host->part_buf_start += cnt;
1954         }
1955         return cnt;
1956 }
1957
1958 /* pull final bytes from the part_buf, assuming it's just been filled */
1959 static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
1960 {
1961         memcpy(buf, &host->part_buf, cnt);
1962         host->part_buf_start = cnt;
1963         host->part_buf_count = (1 << host->data_shift) - cnt;
1964 }
1965
1966 static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
1967 {
1968         struct mmc_data *data = host->data;
1969         int init_cnt = cnt;
1970
1971         /* try and push anything in the part_buf */
1972         if (unlikely(host->part_buf_count)) {
1973                 int len = dw_mci_push_part_bytes(host, buf, cnt);
1974
1975                 buf += len;
1976                 cnt -= len;
1977                 if (host->part_buf_count == 2) {
1978                         mci_fifo_writew(host->fifo_reg, host->part_buf16);
1979                         host->part_buf_count = 0;
1980                 }
1981         }
1982 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
1983         if (unlikely((unsigned long)buf & 0x1)) {
1984                 while (cnt >= 2) {
1985                         u16 aligned_buf[64];
1986                         int len = min(cnt & -2, (int)sizeof(aligned_buf));
1987                         int items = len >> 1;
1988                         int i;
1989                         /* memcpy from input buffer into aligned buffer */
1990                         memcpy(aligned_buf, buf, len);
1991                         buf += len;
1992                         cnt -= len;
1993                         /* push data from aligned buffer into fifo */
1994                         for (i = 0; i < items; ++i)
1995                                 mci_fifo_writew(host->fifo_reg, aligned_buf[i]);
1996                 }
1997         } else
1998 #endif
1999         {
2000                 u16 *pdata = buf;
2001
2002                 for (; cnt >= 2; cnt -= 2)
2003                         mci_fifo_writew(host->fifo_reg, *pdata++);
2004                 buf = pdata;
2005         }
2006         /* put anything remaining in the part_buf */
2007         if (cnt) {
2008                 dw_mci_set_part_bytes(host, buf, cnt);
2009                  /* Push data if we have reached the expected data length */
2010                 if ((data->bytes_xfered + init_cnt) ==
2011                     (data->blksz * data->blocks))
2012                         mci_fifo_writew(host->fifo_reg, host->part_buf16);
2013         }
2014 }
2015
2016 static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
2017 {
2018 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2019         if (unlikely((unsigned long)buf & 0x1)) {
2020                 while (cnt >= 2) {
2021                         /* pull data from fifo into aligned buffer */
2022                         u16 aligned_buf[64];
2023                         int len = min(cnt & -2, (int)sizeof(aligned_buf));
2024                         int items = len >> 1;
2025                         int i;
2026
2027                         for (i = 0; i < items; ++i)
2028                                 aligned_buf[i] = mci_fifo_readw(host->fifo_reg);
2029                         /* memcpy from aligned buffer into output buffer */
2030                         memcpy(buf, aligned_buf, len);
2031                         buf += len;
2032                         cnt -= len;
2033                 }
2034         } else
2035 #endif
2036         {
2037                 u16 *pdata = buf;
2038
2039                 for (; cnt >= 2; cnt -= 2)
2040                         *pdata++ = mci_fifo_readw(host->fifo_reg);
2041                 buf = pdata;
2042         }
2043         if (cnt) {
2044                 host->part_buf16 = mci_fifo_readw(host->fifo_reg);
2045                 dw_mci_pull_final_bytes(host, buf, cnt);
2046         }
2047 }
2048
2049 static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
2050 {
2051         struct mmc_data *data = host->data;
2052         int init_cnt = cnt;
2053
2054         /* try and push anything in the part_buf */
2055         if (unlikely(host->part_buf_count)) {
2056                 int len = dw_mci_push_part_bytes(host, buf, cnt);
2057
2058                 buf += len;
2059                 cnt -= len;
2060                 if (host->part_buf_count == 4) {
2061                         mci_fifo_writel(host->fifo_reg, host->part_buf32);
2062                         host->part_buf_count = 0;
2063                 }
2064         }
2065 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2066         if (unlikely((unsigned long)buf & 0x3)) {
2067                 while (cnt >= 4) {
2068                         u32 aligned_buf[32];
2069                         int len = min(cnt & -4, (int)sizeof(aligned_buf));
2070                         int items = len >> 2;
2071                         int i;
2072                         /* memcpy from input buffer into aligned buffer */
2073                         memcpy(aligned_buf, buf, len);
2074                         buf += len;
2075                         cnt -= len;
2076                         /* push data from aligned buffer into fifo */
2077                         for (i = 0; i < items; ++i)
2078                                 mci_fifo_writel(host->fifo_reg, aligned_buf[i]);
2079                 }
2080         } else
2081 #endif
2082         {
2083                 u32 *pdata = buf;
2084
2085                 for (; cnt >= 4; cnt -= 4)
2086                         mci_fifo_writel(host->fifo_reg, *pdata++);
2087                 buf = pdata;
2088         }
2089         /* put anything remaining in the part_buf */
2090         if (cnt) {
2091                 dw_mci_set_part_bytes(host, buf, cnt);
2092                  /* Push data if we have reached the expected data length */
2093                 if ((data->bytes_xfered + init_cnt) ==
2094                     (data->blksz * data->blocks))
2095                         mci_fifo_writel(host->fifo_reg, host->part_buf32);
2096         }
2097 }
2098
2099 static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
2100 {
2101 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2102         if (unlikely((unsigned long)buf & 0x3)) {
2103                 while (cnt >= 4) {
2104                         /* pull data from fifo into aligned buffer */
2105                         u32 aligned_buf[32];
2106                         int len = min(cnt & -4, (int)sizeof(aligned_buf));
2107                         int items = len >> 2;
2108                         int i;
2109
2110                         for (i = 0; i < items; ++i)
2111                                 aligned_buf[i] = mci_fifo_readl(host->fifo_reg);
2112                         /* memcpy from aligned buffer into output buffer */
2113                         memcpy(buf, aligned_buf, len);
2114                         buf += len;
2115                         cnt -= len;
2116                 }
2117         } else
2118 #endif
2119         {
2120                 u32 *pdata = buf;
2121
2122                 for (; cnt >= 4; cnt -= 4)
2123                         *pdata++ = mci_fifo_readl(host->fifo_reg);
2124                 buf = pdata;
2125         }
2126         if (cnt) {
2127                 host->part_buf32 = mci_fifo_readl(host->fifo_reg);
2128                 dw_mci_pull_final_bytes(host, buf, cnt);
2129         }
2130 }
2131
2132 static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
2133 {
2134         struct mmc_data *data = host->data;
2135         int init_cnt = cnt;
2136
2137         /* try and push anything in the part_buf */
2138         if (unlikely(host->part_buf_count)) {
2139                 int len = dw_mci_push_part_bytes(host, buf, cnt);
2140
2141                 buf += len;
2142                 cnt -= len;
2143
2144                 if (host->part_buf_count == 8) {
2145                         mci_fifo_writeq(host->fifo_reg, host->part_buf);
2146                         host->part_buf_count = 0;
2147                 }
2148         }
2149 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2150         if (unlikely((unsigned long)buf & 0x7)) {
2151                 while (cnt >= 8) {
2152                         u64 aligned_buf[16];
2153                         int len = min(cnt & -8, (int)sizeof(aligned_buf));
2154                         int items = len >> 3;
2155                         int i;
2156                         /* memcpy from input buffer into aligned buffer */
2157                         memcpy(aligned_buf, buf, len);
2158                         buf += len;
2159                         cnt -= len;
2160                         /* push data from aligned buffer into fifo */
2161                         for (i = 0; i < items; ++i)
2162                                 mci_fifo_writeq(host->fifo_reg, aligned_buf[i]);
2163                 }
2164         } else
2165 #endif
2166         {
2167                 u64 *pdata = buf;
2168
2169                 for (; cnt >= 8; cnt -= 8)
2170                         mci_fifo_writeq(host->fifo_reg, *pdata++);
2171                 buf = pdata;
2172         }
2173         /* put anything remaining in the part_buf */
2174         if (cnt) {
2175                 dw_mci_set_part_bytes(host, buf, cnt);
2176                 /* Push data if we have reached the expected data length */
2177                 if ((data->bytes_xfered + init_cnt) ==
2178                     (data->blksz * data->blocks))
2179                         mci_fifo_writeq(host->fifo_reg, host->part_buf);
2180         }
2181 }
2182
2183 static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
2184 {
2185 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2186         if (unlikely((unsigned long)buf & 0x7)) {
2187                 while (cnt >= 8) {
2188                         /* pull data from fifo into aligned buffer */
2189                         u64 aligned_buf[16];
2190                         int len = min(cnt & -8, (int)sizeof(aligned_buf));
2191                         int items = len >> 3;
2192                         int i;
2193
2194                         for (i = 0; i < items; ++i)
2195                                 aligned_buf[i] = mci_fifo_readq(host->fifo_reg);
2196
2197                         /* memcpy from aligned buffer into output buffer */
2198                         memcpy(buf, aligned_buf, len);
2199                         buf += len;
2200                         cnt -= len;
2201                 }
2202         } else
2203 #endif
2204         {
2205                 u64 *pdata = buf;
2206
2207                 for (; cnt >= 8; cnt -= 8)
2208                         *pdata++ = mci_fifo_readq(host->fifo_reg);
2209                 buf = pdata;
2210         }
2211         if (cnt) {
2212                 host->part_buf = mci_fifo_readq(host->fifo_reg);
2213                 dw_mci_pull_final_bytes(host, buf, cnt);
2214         }
2215 }
2216
2217 static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
2218 {
2219         int len;
2220
2221         /* get remaining partial bytes */
2222         len = dw_mci_pull_part_bytes(host, buf, cnt);
2223         if (unlikely(len == cnt))
2224                 return;
2225         buf += len;
2226         cnt -= len;
2227
2228         /* get the rest of the data */
2229         host->pull_data(host, buf, cnt);
2230 }
2231
2232 static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
2233 {
2234         struct sg_mapping_iter *sg_miter = &host->sg_miter;
2235         void *buf;
2236         unsigned int offset;
2237         struct mmc_data *data = host->data;
2238         int shift = host->data_shift;
2239         u32 status;
2240         unsigned int len;
2241         unsigned int remain, fcnt;
2242
2243         do {
2244                 if (!sg_miter_next(sg_miter))
2245                         goto done;
2246
2247                 host->sg = sg_miter->piter.sg;
2248                 buf = sg_miter->addr;
2249                 remain = sg_miter->length;
2250                 offset = 0;
2251
2252                 do {
2253                         fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
2254                                         << shift) + host->part_buf_count;
2255                         len = min(remain, fcnt);
2256                         if (!len)
2257                                 break;
2258                         dw_mci_pull_data(host, (void *)(buf + offset), len);
2259                         data->bytes_xfered += len;
2260                         offset += len;
2261                         remain -= len;
2262                 } while (remain);
2263
2264                 sg_miter->consumed = offset;
2265                 status = mci_readl(host, MINTSTS);
2266                 mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2267         /* if the RXDR is ready read again */
2268         } while ((status & SDMMC_INT_RXDR) ||
2269                  (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
2270
2271         if (!remain) {
2272                 if (!sg_miter_next(sg_miter))
2273                         goto done;
2274                 sg_miter->consumed = 0;
2275         }
2276         sg_miter_stop(sg_miter);
2277         return;
2278
2279 done:
2280         sg_miter_stop(sg_miter);
2281         host->sg = NULL;
2282         smp_wmb(); /* drain writebuffer */
2283         set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2284 }
2285
2286 static void dw_mci_write_data_pio(struct dw_mci *host)
2287 {
2288         struct sg_mapping_iter *sg_miter = &host->sg_miter;
2289         void *buf;
2290         unsigned int offset;
2291         struct mmc_data *data = host->data;
2292         int shift = host->data_shift;
2293         u32 status;
2294         unsigned int len;
2295         unsigned int fifo_depth = host->fifo_depth;
2296         unsigned int remain, fcnt;
2297
2298         do {
2299                 if (!sg_miter_next(sg_miter))
2300                         goto done;
2301
2302                 host->sg = sg_miter->piter.sg;
2303                 buf = sg_miter->addr;
2304                 remain = sg_miter->length;
2305                 offset = 0;
2306
2307                 do {
2308                         fcnt = ((fifo_depth -
2309                                  SDMMC_GET_FCNT(mci_readl(host, STATUS)))
2310                                         << shift) - host->part_buf_count;
2311                         len = min(remain, fcnt);
2312                         if (!len)
2313                                 break;
2314                         host->push_data(host, (void *)(buf + offset), len);
2315                         data->bytes_xfered += len;
2316                         offset += len;
2317                         remain -= len;
2318                 } while (remain);
2319
2320                 sg_miter->consumed = offset;
2321                 status = mci_readl(host, MINTSTS);
2322                 mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
2323         } while (status & SDMMC_INT_TXDR); /* if TXDR write again */
2324
2325         if (!remain) {
2326                 if (!sg_miter_next(sg_miter))
2327                         goto done;
2328                 sg_miter->consumed = 0;
2329         }
2330         sg_miter_stop(sg_miter);
2331         return;
2332
2333 done:
2334         sg_miter_stop(sg_miter);
2335         host->sg = NULL;
2336         smp_wmb(); /* drain writebuffer */
2337         set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2338 }
2339
2340 static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
2341 {
2342         if (!host->cmd_status)
2343                 host->cmd_status = status;
2344
2345         smp_wmb(); /* drain writebuffer */
2346
2347         set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2348         tasklet_schedule(&host->tasklet);
2349 }
2350
2351 static void dw_mci_handle_cd(struct dw_mci *host)
2352 {
2353         int i;
2354
2355         for (i = 0; i < host->num_slots; i++) {
2356                 struct dw_mci_slot *slot = host->slot[i];
2357
2358                 if (!slot)
2359                         continue;
2360
2361                 if (slot->mmc->ops->card_event)
2362                         slot->mmc->ops->card_event(slot->mmc);
2363                 mmc_detect_change(slot->mmc,
2364                         msecs_to_jiffies(host->pdata->detect_delay_ms));
2365         }
2366 }
2367
2368 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
2369 {
2370         struct dw_mci *host = dev_id;
2371         u32 pending;
2372         int i;
2373
2374         pending = mci_readl(host, MINTSTS); /* read-only mask reg */
2375
2376         if (pending) {
2377                 /* Check volt switch first, since it can look like an error */
2378                 if ((host->state == STATE_SENDING_CMD11) &&
2379                     (pending & SDMMC_INT_VOLT_SWITCH)) {
2380                         unsigned long irqflags;
2381
2382                         mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
2383                         pending &= ~SDMMC_INT_VOLT_SWITCH;
2384
2385                         /*
2386                          * Hold the lock; we know cmd11_timer can't be kicked
2387                          * off after the lock is released, so safe to delete.
2388                          */
2389                         spin_lock_irqsave(&host->irq_lock, irqflags);
2390                         dw_mci_cmd_interrupt(host, pending);
2391                         spin_unlock_irqrestore(&host->irq_lock, irqflags);
2392
2393                         del_timer(&host->cmd11_timer);
2394                 }
2395
2396                 if (pending & DW_MCI_CMD_ERROR_FLAGS) {
2397                         mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
2398                         host->cmd_status = pending;
2399                         smp_wmb(); /* drain writebuffer */
2400                         set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2401                 }
2402
2403                 if (pending & DW_MCI_DATA_ERROR_FLAGS) {
2404                         /* if there is an error report DATA_ERROR */
2405                         mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
2406                         host->data_status = pending;
2407                         smp_wmb(); /* drain writebuffer */
2408                         set_bit(EVENT_DATA_ERROR, &host->pending_events);
2409                         tasklet_schedule(&host->tasklet);
2410                 }
2411
2412                 if (pending & SDMMC_INT_DATA_OVER) {
2413                         if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
2414                                 del_timer(&host->dto_timer);
2415
2416                         mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
2417                         if (!host->data_status)
2418                                 host->data_status = pending;
2419                         smp_wmb(); /* drain writebuffer */
2420                         if (host->dir_status == DW_MCI_RECV_STATUS) {
2421                                 if (host->sg != NULL)
2422                                         dw_mci_read_data_pio(host, true);
2423                         }
2424                         set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
2425                         tasklet_schedule(&host->tasklet);
2426                 }
2427
2428                 if (pending & SDMMC_INT_RXDR) {
2429                         mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2430                         if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
2431                                 dw_mci_read_data_pio(host, false);
2432                 }
2433
2434                 if (pending & SDMMC_INT_TXDR) {
2435                         mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
2436                         if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
2437                                 dw_mci_write_data_pio(host);
2438                 }
2439
2440                 if (pending & SDMMC_INT_CMD_DONE) {
2441                         mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
2442                         dw_mci_cmd_interrupt(host, pending);
2443                 }
2444
2445                 if (pending & SDMMC_INT_CD) {
2446                         mci_writel(host, RINTSTS, SDMMC_INT_CD);
2447                         dw_mci_handle_cd(host);
2448                 }
2449
2450                 /* Handle SDIO Interrupts */
2451                 for (i = 0; i < host->num_slots; i++) {
2452                         struct dw_mci_slot *slot = host->slot[i];
2453
2454                         if (!slot)
2455                                 continue;
2456
2457                         if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
2458                                 mci_writel(host, RINTSTS,
2459                                            SDMMC_INT_SDIO(slot->sdio_id));
2460                                 mmc_signal_sdio_irq(slot->mmc);
2461                         }
2462                 }
2463
2464         }
2465
2466         if (host->use_dma != TRANS_MODE_IDMAC)
2467                 return IRQ_HANDLED;
2468
2469         /* Handle IDMA interrupts */
2470         if (host->dma_64bit_address == 1) {
2471                 pending = mci_readl(host, IDSTS64);
2472                 if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
2473                         mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
2474                                                         SDMMC_IDMAC_INT_RI);
2475                         mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
2476                         host->dma_ops->complete((void *)host);
2477                 }
2478         } else {
2479                 pending = mci_readl(host, IDSTS);
2480                 if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
2481                         mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
2482                                                         SDMMC_IDMAC_INT_RI);
2483                         mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
2484                         host->dma_ops->complete((void *)host);
2485                 }
2486         }
2487
2488         return IRQ_HANDLED;
2489 }
2490
2491 #ifdef CONFIG_OF
2492 /* given a slot, find out the device node representing that slot */
2493 static struct device_node *dw_mci_of_find_slot_node(struct dw_mci_slot *slot)
2494 {
2495         struct device *dev = slot->mmc->parent;
2496         struct device_node *np;
2497         const __be32 *addr;
2498         int len;
2499
2500         if (!dev || !dev->of_node)
2501                 return NULL;
2502
2503         for_each_child_of_node(dev->of_node, np) {
2504                 addr = of_get_property(np, "reg", &len);
2505                 if (!addr || (len < sizeof(int)))
2506                         continue;
2507                 if (be32_to_cpup(addr) == slot->id)
2508                         return np;
2509         }
2510         return NULL;
2511 }
2512
2513 static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
2514 {
2515         struct device_node *np = dw_mci_of_find_slot_node(slot);
2516
2517         if (!np)
2518                 return;
2519
2520         if (of_property_read_bool(np, "disable-wp")) {
2521                 slot->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
2522                 dev_warn(slot->mmc->parent,
2523                         "Slot quirk 'disable-wp' is deprecated\n");
2524         }
2525 }
2526 #else /* CONFIG_OF */
2527 static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
2528 {
2529 }
2530 #endif /* CONFIG_OF */
2531
2532 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
2533 {
2534         struct mmc_host *mmc;
2535         struct dw_mci_slot *slot;
2536         const struct dw_mci_drv_data *drv_data = host->drv_data;
2537         int ctrl_id, ret;
2538         u32 freq[2];
2539
2540         mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
2541         if (!mmc)
2542                 return -ENOMEM;
2543
2544         slot = mmc_priv(mmc);
2545         slot->id = id;
2546         slot->sdio_id = host->sdio_id0 + id;
2547         slot->mmc = mmc;
2548         slot->host = host;
2549         host->slot[id] = slot;
2550
2551         mmc->ops = &dw_mci_ops;
2552         if (of_property_read_u32_array(host->dev->of_node,
2553                                        "clock-freq-min-max", freq, 2)) {
2554                 mmc->f_min = DW_MCI_FREQ_MIN;
2555                 mmc->f_max = DW_MCI_FREQ_MAX;
2556         } else {
2557                 mmc->f_min = freq[0];
2558                 mmc->f_max = freq[1];
2559         }
2560
2561         /*if there are external regulators, get them*/
2562         ret = mmc_regulator_get_supply(mmc);
2563         if (ret == -EPROBE_DEFER)
2564                 goto err_host_allocated;
2565
2566         if (!mmc->ocr_avail)
2567                 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
2568
2569         if (host->pdata->caps)
2570                 mmc->caps = host->pdata->caps;
2571
2572         if (host->pdata->pm_caps)
2573                 mmc->pm_caps = host->pdata->pm_caps;
2574
2575         if (host->dev->of_node) {
2576                 ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
2577                 if (ctrl_id < 0)
2578                         ctrl_id = 0;
2579         } else {
2580                 ctrl_id = to_platform_device(host->dev)->id;
2581         }
2582         if (drv_data && drv_data->caps)
2583                 mmc->caps |= drv_data->caps[ctrl_id];
2584
2585         if (host->pdata->caps2)
2586                 mmc->caps2 = host->pdata->caps2;
2587
2588         dw_mci_slot_of_parse(slot);
2589
2590         ret = mmc_of_parse(mmc);
2591         if (ret)
2592                 goto err_host_allocated;
2593
2594         /* Useful defaults if platform data is unset. */
2595         if (host->use_dma == TRANS_MODE_IDMAC) {
2596                 mmc->max_segs = host->ring_size;
2597                 mmc->max_blk_size = 65535;
2598                 mmc->max_seg_size = 0x1000;
2599                 mmc->max_req_size = mmc->max_seg_size * host->ring_size;
2600                 mmc->max_blk_count = mmc->max_req_size / 512;
2601         } else if (host->use_dma == TRANS_MODE_EDMAC) {
2602                 mmc->max_segs = 64;
2603                 mmc->max_blk_size = 65535;
2604                 mmc->max_blk_count = 65535;
2605                 mmc->max_req_size =
2606                                 mmc->max_blk_size * mmc->max_blk_count;
2607                 mmc->max_seg_size = mmc->max_req_size;
2608         } else {
2609                 /* TRANS_MODE_PIO */
2610                 mmc->max_segs = 64;
2611                 mmc->max_blk_size = 65535; /* BLKSIZ is 16 bits */
2612                 mmc->max_blk_count = 512;
2613                 mmc->max_req_size = mmc->max_blk_size *
2614                                     mmc->max_blk_count;
2615                 mmc->max_seg_size = mmc->max_req_size;
2616         }
2617
2618         if (dw_mci_get_cd(mmc))
2619                 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
2620         else
2621                 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
2622
2623         ret = mmc_add_host(mmc);
2624         if (ret)
2625                 goto err_host_allocated;
2626
2627 #if defined(CONFIG_DEBUG_FS)
2628         dw_mci_init_debugfs(slot);
2629 #endif
2630
2631         return 0;
2632
2633 err_host_allocated:
2634         mmc_free_host(mmc);
2635         return ret;
2636 }
2637
2638 static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
2639 {
2640         /* Debugfs stuff is cleaned up by mmc core */
2641         mmc_remove_host(slot->mmc);
2642         slot->host->slot[id] = NULL;
2643         mmc_free_host(slot->mmc);
2644 }
2645
2646 static void dw_mci_init_dma(struct dw_mci *host)
2647 {
2648         int addr_config;
2649         struct device *dev = host->dev;
2650         struct device_node *np = dev->of_node;
2651
2652         /*
2653         * Check tansfer mode from HCON[17:16]
2654         * Clear the ambiguous description of dw_mmc databook:
2655         * 2b'00: No DMA Interface -> Actually means using Internal DMA block
2656         * 2b'01: DesignWare DMA Interface -> Synopsys DW-DMA block
2657         * 2b'10: Generic DMA Interface -> non-Synopsys generic DMA block
2658         * 2b'11: Non DW DMA Interface -> pio only
2659         * Compared to DesignWare DMA Interface, Generic DMA Interface has a
2660         * simpler request/acknowledge handshake mechanism and both of them
2661         * are regarded as external dma master for dw_mmc.
2662         */
2663         host->use_dma = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
2664         if (host->use_dma == DMA_INTERFACE_IDMA) {
2665                 host->use_dma = TRANS_MODE_IDMAC;
2666         } else if (host->use_dma == DMA_INTERFACE_DWDMA ||
2667                    host->use_dma == DMA_INTERFACE_GDMA) {
2668                 host->use_dma = TRANS_MODE_EDMAC;
2669         } else {
2670                 goto no_dma;
2671         }
2672
2673         /* Determine which DMA interface to use */
2674         if (host->use_dma == TRANS_MODE_IDMAC) {
2675                 /*
2676                 * Check ADDR_CONFIG bit in HCON to find
2677                 * IDMAC address bus width
2678                 */
2679                 addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON));
2680
2681                 if (addr_config == 1) {
2682                         /* host supports IDMAC in 64-bit address mode */
2683                         host->dma_64bit_address = 1;
2684                         dev_info(host->dev,
2685                                  "IDMAC supports 64-bit address mode.\n");
2686                         if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
2687                                 dma_set_coherent_mask(host->dev,
2688                                                       DMA_BIT_MASK(64));
2689                 } else {
2690                         /* host supports IDMAC in 32-bit address mode */
2691                         host->dma_64bit_address = 0;
2692                         dev_info(host->dev,
2693                                  "IDMAC supports 32-bit address mode.\n");
2694                 }
2695
2696                 /* Alloc memory for sg translation */
2697                 host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
2698                                                    &host->sg_dma, GFP_KERNEL);
2699                 if (!host->sg_cpu) {
2700                         dev_err(host->dev,
2701                                 "%s: could not alloc DMA memory\n",
2702                                 __func__);
2703                         goto no_dma;
2704                 }
2705
2706                 host->dma_ops = &dw_mci_idmac_ops;
2707                 dev_info(host->dev, "Using internal DMA controller.\n");
2708         } else {
2709                 /* TRANS_MODE_EDMAC: check dma bindings again */
2710                 if ((of_property_count_strings(np, "dma-names") < 0) ||
2711                     (!of_find_property(np, "dmas", NULL))) {
2712                         goto no_dma;
2713                 }
2714                 host->dma_ops = &dw_mci_edmac_ops;
2715                 dev_info(host->dev, "Using external DMA controller.\n");
2716         }
2717
2718         if (host->dma_ops->init && host->dma_ops->start &&
2719             host->dma_ops->stop && host->dma_ops->cleanup) {
2720                 if (host->dma_ops->init(host)) {
2721                         dev_err(host->dev, "%s: Unable to initialize DMA Controller.\n",
2722                                 __func__);
2723                         goto no_dma;
2724                 }
2725         } else {
2726                 dev_err(host->dev, "DMA initialization not found.\n");
2727                 goto no_dma;
2728         }
2729
2730         return;
2731
2732 no_dma:
2733         dev_info(host->dev, "Using PIO mode.\n");
2734         host->use_dma = TRANS_MODE_PIO;
2735 }
2736
2737 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
2738 {
2739         unsigned long timeout = jiffies + msecs_to_jiffies(500);
2740         u32 ctrl;
2741
2742         ctrl = mci_readl(host, CTRL);
2743         ctrl |= reset;
2744         mci_writel(host, CTRL, ctrl);
2745
2746         /* wait till resets clear */
2747         do {
2748                 ctrl = mci_readl(host, CTRL);
2749                 if (!(ctrl & reset))
2750                         return true;
2751         } while (time_before(jiffies, timeout));
2752
2753         dev_err(host->dev,
2754                 "Timeout resetting block (ctrl reset %#x)\n",
2755                 ctrl & reset);
2756
2757         return false;
2758 }
2759
2760 static bool dw_mci_reset(struct dw_mci *host)
2761 {
2762         u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
2763         bool ret = false;
2764
2765         /*
2766          * Reseting generates a block interrupt, hence setting
2767          * the scatter-gather pointer to NULL.
2768          */
2769         if (host->sg) {
2770                 sg_miter_stop(&host->sg_miter);
2771                 host->sg = NULL;
2772         }
2773
2774         if (host->use_dma)
2775                 flags |= SDMMC_CTRL_DMA_RESET;
2776
2777         if (dw_mci_ctrl_reset(host, flags)) {
2778                 /*
2779                  * In all cases we clear the RAWINTS register to clear any
2780                  * interrupts.
2781                  */
2782                 mci_writel(host, RINTSTS, 0xFFFFFFFF);
2783
2784                 /* if using dma we wait for dma_req to clear */
2785                 if (host->use_dma) {
2786                         unsigned long timeout = jiffies + msecs_to_jiffies(500);
2787                         u32 status;
2788
2789                         do {
2790                                 status = mci_readl(host, STATUS);
2791                                 if (!(status & SDMMC_STATUS_DMA_REQ))
2792                                         break;
2793                                 cpu_relax();
2794                         } while (time_before(jiffies, timeout));
2795
2796                         if (status & SDMMC_STATUS_DMA_REQ) {
2797                                 dev_err(host->dev,
2798                                         "%s: Timeout waiting for dma_req to clear during reset\n",
2799                                         __func__);
2800                                 goto ciu_out;
2801                         }
2802
2803                         /* when using DMA next we reset the fifo again */
2804                         if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
2805                                 goto ciu_out;
2806                 }
2807         } else {
2808                 /* if the controller reset bit did clear, then set clock regs */
2809                 if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
2810                         dev_err(host->dev,
2811                                 "%s: fifo/dma reset bits didn't clear but ciu was reset, doing clock update\n",
2812                                 __func__);
2813                         goto ciu_out;
2814                 }
2815         }
2816
2817         if (host->use_dma == TRANS_MODE_IDMAC)
2818                 /* It is also recommended that we reset and reprogram idmac */
2819                 dw_mci_idmac_reset(host);
2820
2821         ret = true;
2822
2823 ciu_out:
2824         /* After a CTRL reset we need to have CIU set clock registers  */
2825         mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
2826
2827         return ret;
2828 }
2829
2830 static void dw_mci_cmd11_timer(unsigned long arg)
2831 {
2832         struct dw_mci *host = (struct dw_mci *)arg;
2833
2834         if (host->state != STATE_SENDING_CMD11) {
2835                 dev_warn(host->dev, "Unexpected CMD11 timeout\n");
2836                 return;
2837         }
2838
2839         host->cmd_status = SDMMC_INT_RTO;
2840         set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2841         tasklet_schedule(&host->tasklet);
2842 }
2843
2844 static void dw_mci_dto_timer(unsigned long arg)
2845 {
2846         struct dw_mci *host = (struct dw_mci *)arg;
2847
2848         switch (host->state) {
2849         case STATE_SENDING_DATA:
2850         case STATE_DATA_BUSY:
2851                 /*
2852                  * If DTO interrupt does NOT come in sending data state,
2853                  * we should notify the driver to terminate current transfer
2854                  * and report a data timeout to the core.
2855                  */
2856                 host->data_status = SDMMC_INT_DRTO;
2857                 set_bit(EVENT_DATA_ERROR, &host->pending_events);
2858                 set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
2859                 tasklet_schedule(&host->tasklet);
2860                 break;
2861         default:
2862                 break;
2863         }
2864 }
2865
2866 #ifdef CONFIG_OF
2867 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
2868 {
2869         struct dw_mci_board *pdata;
2870         struct device *dev = host->dev;
2871         struct device_node *np = dev->of_node;
2872         const struct dw_mci_drv_data *drv_data = host->drv_data;
2873         int ret;
2874         u32 clock_frequency;
2875
2876         pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
2877         if (!pdata)
2878                 return ERR_PTR(-ENOMEM);
2879
2880         /* find out number of slots supported */
2881         of_property_read_u32(np, "num-slots", &pdata->num_slots);
2882
2883         if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
2884                 dev_info(dev,
2885                          "fifo-depth property not found, using value of FIFOTH register as default\n");
2886
2887         of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
2888
2889         if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
2890                 pdata->bus_hz = clock_frequency;
2891
2892         if (drv_data && drv_data->parse_dt) {
2893                 ret = drv_data->parse_dt(host);
2894                 if (ret)
2895                         return ERR_PTR(ret);
2896         }
2897
2898         if (of_find_property(np, "supports-highspeed", NULL)) {
2899                 dev_info(dev, "supports-highspeed property is deprecated.\n");
2900                 pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
2901         }
2902
2903         return pdata;
2904 }
2905
2906 #else /* CONFIG_OF */
2907 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
2908 {
2909         return ERR_PTR(-EINVAL);
2910 }
2911 #endif /* CONFIG_OF */
2912
2913 static void dw_mci_enable_cd(struct dw_mci *host)
2914 {
2915         unsigned long irqflags;
2916         u32 temp;
2917         int i;
2918         struct dw_mci_slot *slot;
2919
2920         /*
2921          * No need for CD if all slots have a non-error GPIO
2922          * as well as broken card detection is found.
2923          */
2924         for (i = 0; i < host->num_slots; i++) {
2925                 slot = host->slot[i];
2926                 if (slot->mmc->caps & MMC_CAP_NEEDS_POLL)
2927                         return;
2928
2929                 if (mmc_gpio_get_cd(slot->mmc) < 0)
2930                         break;
2931         }
2932         if (i == host->num_slots)
2933                 return;
2934
2935         spin_lock_irqsave(&host->irq_lock, irqflags);
2936         temp = mci_readl(host, INTMASK);
2937         temp  |= SDMMC_INT_CD;
2938         mci_writel(host, INTMASK, temp);
2939         spin_unlock_irqrestore(&host->irq_lock, irqflags);
2940 }
2941
2942 int dw_mci_probe(struct dw_mci *host)
2943 {
2944         const struct dw_mci_drv_data *drv_data = host->drv_data;
2945         int width, i, ret = 0;
2946         u32 fifo_size;
2947         int init_slots = 0;
2948
2949         if (!host->pdata) {
2950                 host->pdata = dw_mci_parse_dt(host);
2951                 if (IS_ERR(host->pdata)) {
2952                         dev_err(host->dev, "platform data not available\n");
2953                         return -EINVAL;
2954                 }
2955         }
2956
2957         host->biu_clk = devm_clk_get(host->dev, "biu");
2958         if (IS_ERR(host->biu_clk)) {
2959                 dev_dbg(host->dev, "biu clock not available\n");
2960         } else {
2961                 ret = clk_prepare_enable(host->biu_clk);
2962                 if (ret) {
2963                         dev_err(host->dev, "failed to enable biu clock\n");
2964                         return ret;
2965                 }
2966         }
2967
2968         host->ciu_clk = devm_clk_get(host->dev, "ciu");
2969         if (IS_ERR(host->ciu_clk)) {
2970                 dev_dbg(host->dev, "ciu clock not available\n");
2971                 host->bus_hz = host->pdata->bus_hz;
2972         } else {
2973                 ret = clk_prepare_enable(host->ciu_clk);
2974                 if (ret) {
2975                         dev_err(host->dev, "failed to enable ciu clock\n");
2976                         goto err_clk_biu;
2977                 }
2978
2979                 if (host->pdata->bus_hz) {
2980                         ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
2981                         if (ret)
2982                                 dev_warn(host->dev,
2983                                          "Unable to set bus rate to %uHz\n",
2984                                          host->pdata->bus_hz);
2985                 }
2986                 host->bus_hz = clk_get_rate(host->ciu_clk);
2987         }
2988
2989         if (!host->bus_hz) {
2990                 dev_err(host->dev,
2991                         "Platform data must supply bus speed\n");
2992                 ret = -ENODEV;
2993                 goto err_clk_ciu;
2994         }
2995
2996         if (drv_data && drv_data->init) {
2997                 ret = drv_data->init(host);
2998                 if (ret) {
2999                         dev_err(host->dev,
3000                                 "implementation specific init failed\n");
3001                         goto err_clk_ciu;
3002                 }
3003         }
3004
3005         setup_timer(&host->cmd11_timer,
3006                     dw_mci_cmd11_timer, (unsigned long)host);
3007
3008         host->quirks = host->pdata->quirks;
3009
3010         if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
3011                 setup_timer(&host->dto_timer,
3012                             dw_mci_dto_timer, (unsigned long)host);
3013
3014         spin_lock_init(&host->lock);
3015         spin_lock_init(&host->irq_lock);
3016         INIT_LIST_HEAD(&host->queue);
3017
3018         /*
3019          * Get the host data width - this assumes that HCON has been set with
3020          * the correct values.
3021          */
3022         i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
3023         if (!i) {
3024                 host->push_data = dw_mci_push_data16;
3025                 host->pull_data = dw_mci_pull_data16;
3026                 width = 16;
3027                 host->data_shift = 1;
3028         } else if (i == 2) {
3029                 host->push_data = dw_mci_push_data64;
3030                 host->pull_data = dw_mci_pull_data64;
3031                 width = 64;
3032                 host->data_shift = 3;
3033         } else {
3034                 /* Check for a reserved value, and warn if it is */
3035                 WARN((i != 1),
3036                      "HCON reports a reserved host data width!\n"
3037                      "Defaulting to 32-bit access.\n");
3038                 host->push_data = dw_mci_push_data32;
3039                 host->pull_data = dw_mci_pull_data32;
3040                 width = 32;
3041                 host->data_shift = 2;
3042         }
3043
3044         /* Reset all blocks */
3045         if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
3046                 ret = -ENODEV;
3047                 goto err_clk_ciu;
3048         }
3049
3050         host->dma_ops = host->pdata->dma_ops;
3051         dw_mci_init_dma(host);
3052
3053         /* Clear the interrupts for the host controller */
3054         mci_writel(host, RINTSTS, 0xFFFFFFFF);
3055         mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
3056
3057         /* Put in max timeout */
3058         mci_writel(host, TMOUT, 0xFFFFFFFF);
3059
3060         /*
3061          * FIFO threshold settings  RxMark  = fifo_size / 2 - 1,
3062          *                          Tx Mark = fifo_size / 2 DMA Size = 8
3063          */
3064         if (!host->pdata->fifo_depth) {
3065                 /*
3066                  * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
3067                  * have been overwritten by the bootloader, just like we're
3068                  * about to do, so if you know the value for your hardware, you
3069                  * should put it in the platform data.
3070                  */
3071                 fifo_size = mci_readl(host, FIFOTH);
3072                 fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
3073         } else {
3074                 fifo_size = host->pdata->fifo_depth;
3075         }
3076         host->fifo_depth = fifo_size;
3077         host->fifoth_val =
3078                 SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
3079         mci_writel(host, FIFOTH, host->fifoth_val);
3080
3081         /* disable clock to CIU */
3082         mci_writel(host, CLKENA, 0);
3083         mci_writel(host, CLKSRC, 0);
3084
3085         /*
3086          * In 2.40a spec, Data offset is changed.
3087          * Need to check the version-id and set data-offset for DATA register.
3088          */
3089         host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
3090         dev_info(host->dev, "Version ID is %04x\n", host->verid);
3091
3092         if (host->verid < DW_MMC_240A)
3093                 host->fifo_reg = host->regs + DATA_OFFSET;
3094         else
3095                 host->fifo_reg = host->regs + DATA_240A_OFFSET;
3096
3097         tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
3098         ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
3099                                host->irq_flags, "dw-mci", host);
3100         if (ret)
3101                 goto err_dmaunmap;
3102
3103         if (host->pdata->num_slots)
3104                 host->num_slots = host->pdata->num_slots;
3105         else
3106                 host->num_slots = 1;
3107
3108         if (host->num_slots < 1 ||
3109             host->num_slots > SDMMC_GET_SLOT_NUM(mci_readl(host, HCON))) {
3110                 dev_err(host->dev,
3111                         "Platform data must supply correct num_slots.\n");
3112                 ret = -ENODEV;
3113                 goto err_clk_ciu;
3114         }
3115
3116         /*
3117          * Enable interrupts for command done, data over, data empty,
3118          * receive ready and error such as transmit, receive timeout, crc error
3119          */
3120         mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
3121                    SDMMC_INT_TXDR | SDMMC_INT_RXDR |
3122                    DW_MCI_ERROR_FLAGS);
3123         /* Enable mci interrupt */
3124         mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
3125
3126         dev_info(host->dev,
3127                  "DW MMC controller at irq %d,%d bit host data width,%u deep fifo\n",
3128                  host->irq, width, fifo_size);
3129
3130         /* We need at least one slot to succeed */
3131         for (i = 0; i < host->num_slots; i++) {
3132                 ret = dw_mci_init_slot(host, i);
3133                 if (ret)
3134                         dev_dbg(host->dev, "slot %d init failed\n", i);
3135                 else
3136                         init_slots++;
3137         }
3138
3139         if (init_slots) {
3140                 dev_info(host->dev, "%d slots initialized\n", init_slots);
3141         } else {
3142                 dev_dbg(host->dev,
3143                         "attempted to initialize %d slots, but failed on all\n",
3144                         host->num_slots);
3145                 goto err_dmaunmap;
3146         }
3147
3148         /* Now that slots are all setup, we can enable card detect */
3149         dw_mci_enable_cd(host);
3150
3151         return 0;
3152
3153 err_dmaunmap:
3154         if (host->use_dma && host->dma_ops->exit)
3155                 host->dma_ops->exit(host);
3156
3157 err_clk_ciu:
3158         if (!IS_ERR(host->ciu_clk))
3159                 clk_disable_unprepare(host->ciu_clk);
3160
3161 err_clk_biu:
3162         if (!IS_ERR(host->biu_clk))
3163                 clk_disable_unprepare(host->biu_clk);
3164
3165         return ret;
3166 }
3167 EXPORT_SYMBOL(dw_mci_probe);
3168
3169 void dw_mci_remove(struct dw_mci *host)
3170 {
3171         int i;
3172
3173         for (i = 0; i < host->num_slots; i++) {
3174                 dev_dbg(host->dev, "remove slot %d\n", i);
3175                 if (host->slot[i])
3176                         dw_mci_cleanup_slot(host->slot[i], i);
3177         }
3178
3179         mci_writel(host, RINTSTS, 0xFFFFFFFF);
3180         mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
3181
3182         /* disable clock to CIU */
3183         mci_writel(host, CLKENA, 0);
3184         mci_writel(host, CLKSRC, 0);
3185
3186         if (host->use_dma && host->dma_ops->exit)
3187                 host->dma_ops->exit(host);
3188
3189         if (!IS_ERR(host->ciu_clk))
3190                 clk_disable_unprepare(host->ciu_clk);
3191
3192         if (!IS_ERR(host->biu_clk))
3193                 clk_disable_unprepare(host->biu_clk);
3194 }
3195 EXPORT_SYMBOL(dw_mci_remove);
3196
3197
3198
3199 #ifdef CONFIG_PM_SLEEP
3200 /*
3201  * TODO: we should probably disable the clock to the card in the suspend path.
3202  */
3203 int dw_mci_suspend(struct dw_mci *host)
3204 {
3205         if (host->use_dma && host->dma_ops->exit)
3206                 host->dma_ops->exit(host);
3207
3208         return 0;
3209 }
3210 EXPORT_SYMBOL(dw_mci_suspend);
3211
3212 int dw_mci_resume(struct dw_mci *host)
3213 {
3214         int i, ret;
3215
3216         if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
3217                 ret = -ENODEV;
3218                 return ret;
3219         }
3220
3221         if (host->use_dma && host->dma_ops->init)
3222                 host->dma_ops->init(host);
3223
3224         /*
3225          * Restore the initial value at FIFOTH register
3226          * And Invalidate the prev_blksz with zero
3227          */
3228         mci_writel(host, FIFOTH, host->fifoth_val);
3229         host->prev_blksz = 0;
3230
3231         /* Put in max timeout */
3232         mci_writel(host, TMOUT, 0xFFFFFFFF);
3233
3234         mci_writel(host, RINTSTS, 0xFFFFFFFF);
3235         mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
3236                    SDMMC_INT_TXDR | SDMMC_INT_RXDR |
3237                    DW_MCI_ERROR_FLAGS);
3238         mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
3239
3240         for (i = 0; i < host->num_slots; i++) {
3241                 struct dw_mci_slot *slot = host->slot[i];
3242
3243                 if (!slot)
3244                         continue;
3245                 if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
3246                         dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
3247                         dw_mci_setup_bus(slot, true);
3248                 }
3249         }
3250
3251         /* Now that slots are all setup, we can enable card detect */
3252         dw_mci_enable_cd(host);
3253
3254         return 0;
3255 }
3256 EXPORT_SYMBOL(dw_mci_resume);
3257 #endif /* CONFIG_PM_SLEEP */
3258
3259 static int __init dw_mci_init(void)
3260 {
3261         pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
3262         return 0;
3263 }
3264
3265 static void __exit dw_mci_exit(void)
3266 {
3267 }
3268
3269 module_init(dw_mci_init);
3270 module_exit(dw_mci_exit);
3271
3272 MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
3273 MODULE_AUTHOR("NXP Semiconductor VietNam");
3274 MODULE_AUTHOR("Imagination Technologies Ltd");
3275 MODULE_LICENSE("GPL v2");