4 * Copyright by Michał Mirosław, 2008-2009
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/delay.h>
14 #include "cb710-mmc.h"
16 static const u8 cb710_clock_divider_log2[8] = {
17 /* 1, 2, 4, 8, 16, 32, 128, 512 */
18 0, 1, 2, 3, 4, 5, 7, 9
20 #define CB710_MAX_DIVIDER_IDX \
21 (ARRAY_SIZE(cb710_clock_divider_log2) - 1)
23 static const u8 cb710_src_freq_mhz[16] = {
24 33, 10, 20, 25, 30, 35, 40, 45,
25 50, 55, 60, 65, 70, 75, 80, 85
28 static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
30 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
31 struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
36 /* on CB710 in HP nx9500:
38 * indexes 1-7 work as written in the table
39 * indexes 0,8-15 give no clock output
41 pci_read_config_dword(pdev, 0x48, &src_freq_idx);
42 src_freq_idx = (src_freq_idx >> 16) & 0xF;
43 src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
45 for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
46 if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
52 else if (divider_idx == 0)
55 cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
57 dev_dbg(cb710_slot_dev(slot),
58 "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
59 src_hz >> cb710_clock_divider_log2[divider_idx & 7],
60 hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
63 static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
64 unsigned short enable, unsigned short mask)
67 * - it gets set later if any interrupt sources are enabled */
68 mask |= CB710_MMC_IE_IRQ_ENABLE;
70 /* look like interrupt is fired whenever
71 * WORD[0x0C] & WORD[0x10] != 0;
72 * -> bit 15 port 0x0C seems to be global interrupt enable
75 enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
79 enable |= CB710_MMC_IE_IRQ_ENABLE;
81 cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
84 static void cb710_mmc_enable_irq(struct cb710_slot *slot,
85 unsigned short enable, unsigned short mask)
87 struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
90 spin_lock_irqsave(&reader->irq_lock, flags);
91 /* this is the only thing irq_lock protects */
92 __cb710_mmc_enable_irq(slot, enable, mask);
93 spin_unlock_irqrestore(&reader->irq_lock, flags);
96 static void cb710_mmc_reset_events(struct cb710_slot *slot)
98 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
99 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
100 cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
103 static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
106 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
107 CB710_MMC_C1_4BIT_DATA_BUS, 0);
109 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
110 0, CB710_MMC_C1_4BIT_DATA_BUS);
113 static int cb710_check_event(struct cb710_slot *slot, u8 what)
117 status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
119 if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
120 /* it is just a guess, so log it */
121 dev_dbg(cb710_slot_dev(slot),
122 "CHECK : ignoring bit 6 in status %04X\n", status);
123 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
124 CB710_MMC_S0_FIFO_UNDERFLOW);
125 status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
128 if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
129 dev_dbg(cb710_slot_dev(slot),
130 "CHECK : returning EIO on status %04X\n", status);
131 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
132 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
137 /* 'what' is a bit in MMC_STATUS1 */
138 if ((status >> 8) & what) {
139 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
146 static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
149 unsigned limit = 2000000; /* FIXME: real timeout */
151 #ifdef CONFIG_CB710_DEBUG
153 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
156 while (!(err = cb710_check_event(slot, what))) {
158 cb710_dump_regs(cb710_slot_to_chip(slot),
159 CB710_DUMP_REGS_MMC);
166 #ifdef CONFIG_CB710_DEBUG
167 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
169 limit = 2000000 - limit;
171 dev_dbg(cb710_slot_dev(slot),
172 "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
175 return err < 0 ? err : 0;
179 static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
181 unsigned limit = 500000; /* FIXME: real timeout */
184 #ifdef CONFIG_CB710_DEBUG
186 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
189 while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
191 cb710_dump_regs(cb710_slot_to_chip(slot),
192 CB710_DUMP_REGS_MMC);
199 #ifdef CONFIG_CB710_DEBUG
200 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
202 limit = 500000 - limit;
204 dev_dbg(cb710_slot_dev(slot),
205 "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
211 static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
212 size_t count, size_t blocksize)
214 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
215 cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
216 ((count - 1) << 16)|(blocksize - 1));
218 dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
219 count, count == 1 ? "" : "s", blocksize);
222 static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
224 /* without this, received data is prepended with 8-bytes of zeroes */
228 r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
229 r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
230 if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
231 & CB710_MMC_S0_FIFO_UNDERFLOW) {
232 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
233 CB710_MMC_S0_FIFO_UNDERFLOW);
237 dev_dbg(cb710_slot_dev(slot),
238 "FIFO-read-hack: expected STATUS0 bit was %s\n",
239 ok ? "set." : "NOT SET!");
240 dev_dbg(cb710_slot_dev(slot),
241 "FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
242 r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
245 static int cb710_mmc_receive_pio(struct cb710_slot *slot,
246 struct sg_mapping_iter *miter, size_t dw_count)
248 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
249 int err = cb710_wait_for_event(slot,
250 CB710_MMC_S1_PIO_TRANSFER_DONE);
255 cb710_sg_dwiter_write_from_io(miter,
256 slot->iobase + CB710_MMC_DATA_PORT, dw_count);
261 static bool cb710_is_transfer_size_supported(struct mmc_data *data)
263 return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
266 static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
268 struct sg_mapping_iter miter;
269 size_t len, blocks = data->blocks;
272 /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
273 * except single 8B block */
274 if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
277 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
279 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
280 15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
282 cb710_mmc_fifo_hack(slot);
284 while (blocks-- > 0) {
288 err = cb710_mmc_receive_pio(slot, &miter, 4);
297 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
298 len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
300 len = (len >= 8) ? 4 : 2;
301 err = cb710_mmc_receive_pio(slot, &miter, len);
306 sg_miter_stop(&miter);
310 static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
312 struct sg_mapping_iter miter;
313 size_t len, blocks = data->blocks;
316 /* TODO: I don't know how/if the hardware handles multiple
317 * non-16B-boundary blocks */
318 if (unlikely(data->blocks > 1 && data->blksz & 15))
321 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
323 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
324 0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
326 while (blocks-- > 0) {
327 len = (data->blksz + 15) >> 4;
329 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
330 & CB710_MMC_S2_FIFO_EMPTY)) {
331 err = cb710_wait_for_event(slot,
332 CB710_MMC_S1_PIO_TRANSFER_DONE);
336 cb710_sg_dwiter_read_to_io(&miter,
337 slot->iobase + CB710_MMC_DATA_PORT, 4);
341 sg_miter_stop(&miter);
345 static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
346 struct mmc_command *cmd)
348 unsigned int flags = cmd->flags;
351 /* Windows driver returned 0 for commands for which no response
352 * is expected. It happened that there were only two such commands
353 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
354 * as well be a bug in that driver.
356 * Original driver set bit 14 for MMC/SD application
357 * commands. There's no difference 'on the wire' and
358 * it apparently works without it anyway.
361 switch (flags & MMC_CMD_MASK) {
362 case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break;
363 case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break;
364 case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break;
365 case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break;
368 if (flags & MMC_RSP_BUSY)
369 cb_flags |= CB710_MMC_RSP_BUSY;
371 cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
373 if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
374 cb_flags |= CB710_MMC_DATA_READ;
376 if (flags & MMC_RSP_PRESENT) {
377 /* Windows driver set 01 at bits 4,3 except for
378 * MMC_SET_BLOCKLEN where it set 10. Maybe the
379 * hardware can do something special about this
380 * command? The original driver looks buggy/incomplete
381 * anyway so we ignore this for now.
383 * I assume that 00 here means no response is expected.
385 cb_flags |= CB710_MMC_RSP_PRESENT;
387 if (flags & MMC_RSP_136)
388 cb_flags |= CB710_MMC_RSP_136;
389 if (!(flags & MMC_RSP_CRC))
390 cb_flags |= CB710_MMC_RSP_NO_CRC;
396 static void cb710_receive_response(struct cb710_slot *slot,
397 struct mmc_command *cmd)
399 unsigned rsp_opcode, wanted_opcode;
401 /* Looks like final byte with CRC is always stripped (same as SDHCI) */
402 if (cmd->flags & MMC_RSP_136) {
405 resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
406 resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
407 resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
408 resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
409 rsp_opcode = resp[0] >> 24;
411 cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
412 cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
413 cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
414 cmd->resp[3] = (resp[3] << 8);
416 rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
417 cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
420 wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
421 if (rsp_opcode != wanted_opcode)
422 cmd->error = -EILSEQ;
425 static int cb710_mmc_transfer_data(struct cb710_slot *slot,
426 struct mmc_data *data)
430 if (data->flags & MMC_DATA_READ)
431 error = cb710_mmc_receive(slot, data);
433 error = cb710_mmc_send(slot, data);
435 to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
440 data->bytes_xfered = data->blksz * data->blocks;
444 static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
446 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
447 struct cb710_mmc_reader *reader = mmc_priv(mmc);
448 struct mmc_data *data = cmd->data;
450 u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
451 dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
454 if (!cb710_is_transfer_size_supported(data)) {
455 data->error = -EINVAL;
458 cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
461 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
462 cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
463 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
464 cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
465 cb710_mmc_reset_events(slot);
466 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
467 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
469 cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
473 if (cmd->flags & MMC_RSP_PRESENT) {
474 cb710_receive_response(slot, cmd);
480 data->error = cb710_mmc_transfer_data(slot, data);
484 static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
486 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
487 struct cb710_mmc_reader *reader = mmc_priv(mmc);
489 WARN_ON(reader->mrq != NULL);
492 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
494 if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
495 cb710_mmc_command(mmc, mrq->stop);
497 tasklet_schedule(&reader->finish_req_tasklet);
500 static int cb710_mmc_powerup(struct cb710_slot *slot)
502 #ifdef CONFIG_CB710_DEBUG
503 struct cb710_chip *chip = cb710_slot_to_chip(slot);
507 /* a lot of magic for now */
508 dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
509 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
510 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
513 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
514 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
515 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
517 dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
518 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
519 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
522 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
523 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
525 dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
526 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
527 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
530 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
531 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
533 dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
534 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
535 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
536 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
537 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
538 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
539 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
540 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
543 /* This port behaves weird: quick byte reads of 0x08,0x09 return
544 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
545 * read/written from userspace... What am I missing here?
546 * (it doesn't depend on write-to-read delay) */
547 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
548 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
549 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
550 dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
552 return cb710_check_event(slot, 0);
555 static void cb710_mmc_powerdown(struct cb710_slot *slot)
557 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
558 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
561 static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
563 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
564 struct cb710_mmc_reader *reader = mmc_priv(mmc);
567 cb710_mmc_select_clock_divider(mmc, ios->clock);
569 if (ios->power_mode != reader->last_power_mode)
570 switch (ios->power_mode) {
572 err = cb710_mmc_powerup(slot);
574 dev_warn(cb710_slot_dev(slot),
575 "powerup failed (%d)- retrying\n", err);
576 cb710_mmc_powerdown(slot);
578 err = cb710_mmc_powerup(slot);
580 dev_warn(cb710_slot_dev(slot),
581 "powerup retry failed (%d) - expect errors\n",
584 reader->last_power_mode = MMC_POWER_ON;
587 cb710_mmc_powerdown(slot);
588 reader->last_power_mode = MMC_POWER_OFF;
595 cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
597 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
600 static int cb710_mmc_get_ro(struct mmc_host *mmc)
602 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
604 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
605 & CB710_MMC_S3_WRITE_PROTECTED;
608 static int cb710_mmc_get_cd(struct mmc_host *mmc)
610 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
612 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
613 & CB710_MMC_S3_CARD_DETECTED;
616 static int cb710_mmc_irq_handler(struct cb710_slot *slot)
618 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
619 struct cb710_mmc_reader *reader = mmc_priv(mmc);
620 u32 status, config1, config2, irqen;
622 status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
623 irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
624 config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
625 config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
627 dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
628 "ie: %08X, c2: %08X, c1: %08X\n",
629 status, irqen, config2, config1);
631 if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
633 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
634 CB710_MMC_S1_CARD_CHANGED);
635 if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
636 == CB710_MMC_IE_CISTATUS_MASK)
637 mmc_detect_change(mmc, HZ/5);
639 dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
640 spin_lock(&reader->irq_lock);
641 __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
642 spin_unlock(&reader->irq_lock);
648 static void cb710_mmc_finish_request_tasklet(unsigned long data)
650 struct mmc_host *mmc = (void *)data;
651 struct cb710_mmc_reader *reader = mmc_priv(mmc);
652 struct mmc_request *mrq = reader->mrq;
655 mmc_request_done(mmc, mrq);
658 static const struct mmc_host_ops cb710_mmc_host = {
659 .request = cb710_mmc_request,
660 .set_ios = cb710_mmc_set_ios,
661 .get_ro = cb710_mmc_get_ro,
662 .get_cd = cb710_mmc_get_cd,
667 static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
669 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
670 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
673 err = mmc_suspend_host(mmc);
677 cb710_mmc_enable_irq(slot, 0, ~0);
681 static int cb710_mmc_resume(struct platform_device *pdev)
683 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
684 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
686 cb710_mmc_enable_irq(slot, 0, ~0);
688 return mmc_resume_host(mmc);
691 #endif /* CONFIG_PM */
693 static int cb710_mmc_init(struct platform_device *pdev)
695 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
696 struct cb710_chip *chip = cb710_slot_to_chip(slot);
697 struct mmc_host *mmc;
698 struct cb710_mmc_reader *reader;
702 mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
706 dev_set_drvdata(&pdev->dev, mmc);
708 /* harmless (maybe) magic */
709 pci_read_config_dword(chip->pdev, 0x48, &val);
710 val = cb710_src_freq_mhz[(val >> 16) & 0xF];
711 dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
714 mmc->ops = &cb710_mmc_host;
716 mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
717 mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
718 mmc->caps = MMC_CAP_4_BIT_DATA;
720 reader = mmc_priv(mmc);
722 tasklet_init(&reader->finish_req_tasklet,
723 cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
724 spin_lock_init(&reader->irq_lock);
725 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
727 cb710_mmc_enable_irq(slot, 0, ~0);
728 cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
730 err = mmc_add_host(mmc);
734 dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
737 cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
742 dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
744 cb710_set_irq_handler(slot, NULL);
749 static int cb710_mmc_exit(struct platform_device *pdev)
751 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
752 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
753 struct cb710_mmc_reader *reader = mmc_priv(mmc);
755 cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
757 mmc_remove_host(mmc);
759 /* IRQs should be disabled now, but let's stay on the safe side */
760 cb710_mmc_enable_irq(slot, 0, ~0);
761 cb710_set_irq_handler(slot, NULL);
763 /* clear config ports - just in case */
764 cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
765 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
767 tasklet_kill(&reader->finish_req_tasklet);
773 static struct platform_driver cb710_mmc_driver = {
774 .driver.name = "cb710-mmc",
775 .probe = cb710_mmc_init,
776 .remove = cb710_mmc_exit,
778 .suspend = cb710_mmc_suspend,
779 .resume = cb710_mmc_resume,
783 module_platform_driver(cb710_mmc_driver);
785 MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
786 MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
787 MODULE_LICENSE("GPL");
788 MODULE_ALIAS("platform:cb710-mmc");