Merge tag 'please-pull-misc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git...

[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / mmc / core / core.c

/*
 *  linux/drivers/mmc/core/core.c
 *
 *  Copyright (C) 2003-2004 Russell King, All Rights Reserved.
 *  SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
 *  MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/leds.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
#include <linux/fault-inject.h>
#include <linux/random.h>
#include <linux/slab.h>

#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>

#include "core.h"
#include "bus.h"
#include "host.h"
#include "sdio_bus.h"

#include "mmc_ops.h"
#include "sd_ops.h"
#include "sdio_ops.h"

/* If the device is not responding */
#define MMC_CORE_TIMEOUT_MS     (10 * 60 * 1000) /* 10 minute timeout */

/*
 * Background operations can take a long time, depending on the housekeeping
 * operations the card has to perform.
 */
#define MMC_BKOPS_MAX_TIMEOUT   (4 * 60 * 1000) /* max time to wait in ms */

static struct workqueue_struct *workqueue;
static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };

/*
 * Enabling software CRCs on the data blocks can be a significant (30%)
 * performance cost, and for other reasons may not always be desired.
 * So we allow it it to be disabled.
 */
bool use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);

/*
 * We normally treat cards as removed during suspend if they are not
 * known to be on a non-removable bus, to avoid the risk of writing
 * back data to a different card after resume.  Allow this to be
 * overridden if necessary.
 */
#ifdef CONFIG_MMC_UNSAFE_RESUME
bool mmc_assume_removable;
#else
bool mmc_assume_removable = 1;
#endif
EXPORT_SYMBOL(mmc_assume_removable);
module_param_named(removable, mmc_assume_removable, bool, 0644);
MODULE_PARM_DESC(
        removable,
        "MMC/SD cards are removable and may be removed during suspend");

/*
 * Internal function. Schedule delayed work in the MMC work queue.
 */
static int mmc_schedule_delayed_work(struct delayed_work *work,
                                     unsigned long delay)
{
        return queue_delayed_work(workqueue, work, delay);
}

/*
 * Internal function. Flush all scheduled work from the MMC work queue.
 */
static void mmc_flush_scheduled_work(void)
{
        flush_workqueue(workqueue);
}

#ifdef CONFIG_FAIL_MMC_REQUEST

/*
 * Internal function. Inject random data errors.
 * If mmc_data is NULL no errors are injected.
 */
static void mmc_should_fail_request(struct mmc_host *host,
                                    struct mmc_request *mrq)
{
        struct mmc_command *cmd = mrq->cmd;
        struct mmc_data *data = mrq->data;
        static const int data_errors[] = {
                -ETIMEDOUT,
                -EILSEQ,
                -EIO,
        };

        if (!data)
                return;

        if (cmd->error || data->error ||
            !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
                return;

        data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)];
        data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9;
}

#else /* CONFIG_FAIL_MMC_REQUEST */

static inline void mmc_should_fail_request(struct mmc_host *host,
                                           struct mmc_request *mrq)
{
}

#endif /* CONFIG_FAIL_MMC_REQUEST */

/**
 *      mmc_request_done - finish processing an MMC request
 *      @host: MMC host which completed request
 *      @mrq: MMC request which request
 *
 *      MMC drivers should call this function when they have completed
 *      their processing of a request.
 */
void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
{
        struct mmc_command *cmd = mrq->cmd;
        int err = cmd->error;

        if (err && cmd->retries && mmc_host_is_spi(host)) {
                if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
                        cmd->retries = 0;
        }

        if (err && cmd->retries && !mmc_card_removed(host->card)) {
                /*
                 * Request starter must handle retries - see
                 * mmc_wait_for_req_done().
                 */
                if (mrq->done)
                        mrq->done(mrq);
        } else {
                mmc_should_fail_request(host, mrq);

                led_trigger_event(host->led, LED_OFF);

                pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
                        mmc_hostname(host), cmd->opcode, err,
                        cmd->resp[0], cmd->resp[1],
                        cmd->resp[2], cmd->resp[3]);

                if (mrq->data) {
                        pr_debug("%s:     %d bytes transferred: %d\n",
                                mmc_hostname(host),
                                mrq->data->bytes_xfered, mrq->data->error);
                }

                if (mrq->stop) {
                        pr_debug("%s:     (CMD%u): %d: %08x %08x %08x %08x\n",
                                mmc_hostname(host), mrq->stop->opcode,
                                mrq->stop->error,
                                mrq->stop->resp[0], mrq->stop->resp[1],
                                mrq->stop->resp[2], mrq->stop->resp[3]);
                }

                if (mrq->done)
                        mrq->done(mrq);

                mmc_host_clk_release(host);
        }
}

EXPORT_SYMBOL(mmc_request_done);

static void
mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
#ifdef CONFIG_MMC_DEBUG
        unsigned int i, sz;
        struct scatterlist *sg;
#endif

        if (mrq->sbc) {
                pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
                         mmc_hostname(host), mrq->sbc->opcode,
                         mrq->sbc->arg, mrq->sbc->flags);
        }

        pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
                 mmc_hostname(host), mrq->cmd->opcode,
                 mrq->cmd->arg, mrq->cmd->flags);

        if (mrq->data) {
                pr_debug("%s:     blksz %d blocks %d flags %08x "
                        "tsac %d ms nsac %d\n",
                        mmc_hostname(host), mrq->data->blksz,
                        mrq->data->blocks, mrq->data->flags,
                        mrq->data->timeout_ns / 1000000,
                        mrq->data->timeout_clks);
        }

        if (mrq->stop) {
                pr_debug("%s:     CMD%u arg %08x flags %08x\n",
                         mmc_hostname(host), mrq->stop->opcode,
                         mrq->stop->arg, mrq->stop->flags);
        }

        WARN_ON(!host->claimed);

        mrq->cmd->error = 0;
        mrq->cmd->mrq = mrq;
        if (mrq->data) {
                BUG_ON(mrq->data->blksz > host->max_blk_size);
                BUG_ON(mrq->data->blocks > host->max_blk_count);
                BUG_ON(mrq->data->blocks * mrq->data->blksz >
                        host->max_req_size);

#ifdef CONFIG_MMC_DEBUG
                sz = 0;
                for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
                        sz += sg->length;
                BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
#endif

                mrq->cmd->data = mrq->data;
                mrq->data->error = 0;
                mrq->data->mrq = mrq;
                if (mrq->stop) {
                        mrq->data->stop = mrq->stop;
                        mrq->stop->error = 0;
                        mrq->stop->mrq = mrq;
                }
        }
        mmc_host_clk_hold(host);
        led_trigger_event(host->led, LED_FULL);
        host->ops->request(host, mrq);
}

/**
 *      mmc_start_bkops - start BKOPS for supported cards
 *      @card: MMC card to start BKOPS
 *      @form_exception: A flag to indicate if this function was
 *                       called due to an exception raised by the card
 *
 *      Start background operations whenever requested.
 *      When the urgent BKOPS bit is set in a R1 command response
 *      then background operations should be started immediately.
*/
void mmc_start_bkops(struct mmc_card *card, bool from_exception)
{
        int err;
        int timeout;
        bool use_busy_signal;

        BUG_ON(!card);

        if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card))
                return;

        err = mmc_read_bkops_status(card);
        if (err) {
                pr_err("%s: Failed to read bkops status: %d\n",
                       mmc_hostname(card->host), err);
                return;
        }

        if (!card->ext_csd.raw_bkops_status)
                return;

        if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
            from_exception)
                return;

        mmc_claim_host(card->host);
        if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
                timeout = MMC_BKOPS_MAX_TIMEOUT;
                use_busy_signal = true;
        } else {
                timeout = 0;
                use_busy_signal = false;
        }

        err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
                        EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal);
        if (err) {
                pr_warn("%s: Error %d starting bkops\n",
                        mmc_hostname(card->host), err);
                goto out;
        }

        /*
         * For urgent bkops status (LEVEL_2 and more)
         * bkops executed synchronously, otherwise
         * the operation is in progress
         */
        if (!use_busy_signal)
                mmc_card_set_doing_bkops(card);
out:
        mmc_release_host(card->host);
}
EXPORT_SYMBOL(mmc_start_bkops);

/*
 * mmc_wait_data_done() - done callback for data request
 * @mrq: done data request
 *
 * Wakes up mmc context, passed as a callback to host controller driver
 */
static void mmc_wait_data_done(struct mmc_request *mrq)
{
        mrq->host->context_info.is_done_rcv = true;
        wake_up_interruptible(&mrq->host->context_info.wait);
}

static void mmc_wait_done(struct mmc_request *mrq)
{
        complete(&mrq->completion);
}

/*
 *__mmc_start_data_req() - starts data request
 * @host: MMC host to start the request
 * @mrq: data request to start
 *
 * Sets the done callback to be called when request is completed by the card.
 * Starts data mmc request execution
 */
static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
{
        mrq->done = mmc_wait_data_done;
        mrq->host = host;
        if (mmc_card_removed(host->card)) {
                mrq->cmd->error = -ENOMEDIUM;
                mmc_wait_data_done(mrq);
                return -ENOMEDIUM;
        }
        mmc_start_request(host, mrq);

        return 0;
}

static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
{
        init_completion(&mrq->completion);
        mrq->done = mmc_wait_done;
        if (mmc_card_removed(host->card)) {
                mrq->cmd->error = -ENOMEDIUM;
                complete(&mrq->completion);
                return -ENOMEDIUM;
        }
        mmc_start_request(host, mrq);
        return 0;
}

/*
 * mmc_wait_for_data_req_done() - wait for request completed
 * @host: MMC host to prepare the command.
 * @mrq: MMC request to wait for
 *
 * Blocks MMC context till host controller will ack end of data request
 * execution or new request notification arrives from the block layer.
 * Handles command retries.
 *
 * Returns enum mmc_blk_status after checking errors.
 */
static int mmc_wait_for_data_req_done(struct mmc_host *host,
                                      struct mmc_request *mrq,
                                      struct mmc_async_req *next_req)
{
        struct mmc_command *cmd;
        struct mmc_context_info *context_info = &host->context_info;
        int err;
        unsigned long flags;

        while (1) {
                wait_event_interruptible(context_info->wait,
                                (context_info->is_done_rcv ||
                                 context_info->is_new_req));
                spin_lock_irqsave(&context_info->lock, flags);
                context_info->is_waiting_last_req = false;
                spin_unlock_irqrestore(&context_info->lock, flags);
                if (context_info->is_done_rcv) {
                        context_info->is_done_rcv = false;
                        context_info->is_new_req = false;
                        cmd = mrq->cmd;

                        if (!cmd->error || !cmd->retries ||
                            mmc_card_removed(host->card)) {
                                err = host->areq->err_check(host->card,
                                                            host->areq);
                                break; /* return err */
                        } else {
                                pr_info("%s: req failed (CMD%u): %d, retrying...\n",
                                        mmc_hostname(host),
                                        cmd->opcode, cmd->error);
                                cmd->retries--;
                                cmd->error = 0;
                                host->ops->request(host, mrq);
                                continue; /* wait for done/new event again */
                        }
                } else if (context_info->is_new_req) {
                        context_info->is_new_req = false;
                        if (!next_req) {
                                err = MMC_BLK_NEW_REQUEST;
                                break; /* return err */
                        }
                }
        }
        return err;
}

static void mmc_wait_for_req_done(struct mmc_host *host,
                                  struct mmc_request *mrq)
{
        struct mmc_command *cmd;

        while (1) {
                wait_for_completion(&mrq->completion);

                cmd = mrq->cmd;

                /*
                 * If host has timed out waiting for the sanitize
                 * to complete, card might be still in programming state
                 * so let's try to bring the card out of programming
                 * state.
                 */
                if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
                        if (!mmc_interrupt_hpi(host->card)) {
                                pr_warning("%s: %s: Interrupted sanitize\n",
                                           mmc_hostname(host), __func__);
                                cmd->error = 0;
                                break;
                        } else {
                                pr_err("%s: %s: Failed to interrupt sanitize\n",
                                       mmc_hostname(host), __func__);
                        }
                }
                if (!cmd->error || !cmd->retries ||
                    mmc_card_removed(host->card))
                        break;

                pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
                         mmc_hostname(host), cmd->opcode, cmd->error);
                cmd->retries--;
                cmd->error = 0;
                host->ops->request(host, mrq);
        }
}

/**
 *      mmc_pre_req - Prepare for a new request
 *      @host: MMC host to prepare command
 *      @mrq: MMC request to prepare for
 *      @is_first_req: true if there is no previous started request
 *                     that may run in parellel to this call, otherwise false
 *
 *      mmc_pre_req() is called in prior to mmc_start_req() to let
 *      host prepare for the new request. Preparation of a request may be
 *      performed while another request is running on the host.
 */
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
                 bool is_first_req)
{
        if (host->ops->pre_req) {
                mmc_host_clk_hold(host);
                host->ops->pre_req(host, mrq, is_first_req);
                mmc_host_clk_release(host);
        }
}

/**
 *      mmc_post_req - Post process a completed request
 *      @host: MMC host to post process command
 *      @mrq: MMC request to post process for
 *      @err: Error, if non zero, clean up any resources made in pre_req
 *
 *      Let the host post process a completed request. Post processing of
 *      a request may be performed while another reuqest is running.
 */
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
                         int err)
{
        if (host->ops->post_req) {
                mmc_host_clk_hold(host);
                host->ops->post_req(host, mrq, err);
                mmc_host_clk_release(host);
        }
}

/**
 *      mmc_start_req - start a non-blocking request
 *      @host: MMC host to start command
 *      @areq: async request to start
 *      @error: out parameter returns 0 for success, otherwise non zero
 *
 *      Start a new MMC custom command request for a host.
 *      If there is on ongoing async request wait for completion
 *      of that request and start the new one and return.
 *      Does not wait for the new request to complete.
 *
 *      Returns the completed request, NULL in case of none completed.
 *      Wait for the an ongoing request (previoulsy started) to complete and
 *      return the completed request. If there is no ongoing request, NULL
 *      is returned without waiting. NULL is not an error condition.
 */
struct mmc_async_req *mmc_start_req(struct mmc_host *host,
                                    struct mmc_async_req *areq, int *error)
{
        int err = 0;
        int start_err = 0;
        struct mmc_async_req *data = host->areq;

        /* Prepare a new request */
        if (areq)
                mmc_pre_req(host, areq->mrq, !host->areq);

        if (host->areq) {
                err = mmc_wait_for_data_req_done(host, host->areq->mrq, areq);
                if (err == MMC_BLK_NEW_REQUEST) {
                        if (error)
                                *error = err;
                        /*
                         * The previous request was not completed,
                         * nothing to return
                         */
                        return NULL;
                }
                /*
                 * Check BKOPS urgency for each R1 response
                 */
                if (host->card && mmc_card_mmc(host->card) &&
                    ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
                     (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
                    (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT))
                        mmc_start_bkops(host->card, true);
        }

        if (!err && areq)
                start_err = __mmc_start_data_req(host, areq->mrq);

        if (host->areq)
                mmc_post_req(host, host->areq->mrq, 0);

         /* Cancel a prepared request if it was not started. */
        if ((err || start_err) && areq)
                mmc_post_req(host, areq->mrq, -EINVAL);

        if (err)
                host->areq = NULL;
        else
                host->areq = areq;

        if (error)
                *error = err;
        return data;
}
EXPORT_SYMBOL(mmc_start_req);

/**
 *      mmc_wait_for_req - start a request and wait for completion
 *      @host: MMC host to start command
 *      @mrq: MMC request to start
 *
 *      Start a new MMC custom command request for a host, and wait
 *      for the command to complete. Does not attempt to parse the
 *      response.
 */
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
{
        __mmc_start_req(host, mrq);
        mmc_wait_for_req_done(host, mrq);
}
EXPORT_SYMBOL(mmc_wait_for_req);

/**
 *      mmc_interrupt_hpi - Issue for High priority Interrupt
 *      @card: the MMC card associated with the HPI transfer
 *
 *      Issued High Priority Interrupt, and check for card status
 *      until out-of prg-state.
 */
int mmc_interrupt_hpi(struct mmc_card *card)
{
        int err;
        u32 status;
        unsigned long prg_wait;

        BUG_ON(!card);

        if (!card->ext_csd.hpi_en) {
                pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
                return 1;
        }

        mmc_claim_host(card->host);
        err = mmc_send_status(card, &status);
        if (err) {
                pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
                goto out;
        }

        switch (R1_CURRENT_STATE(status)) {
        case R1_STATE_IDLE:
        case R1_STATE_READY:
        case R1_STATE_STBY:
        case R1_STATE_TRAN:
                /*
                 * In idle and transfer states, HPI is not needed and the caller
                 * can issue the next intended command immediately
                 */
                goto out;
        case R1_STATE_PRG:
                break;
        default:
                /* In all other states, it's illegal to issue HPI */
                pr_debug("%s: HPI cannot be sent. Card state=%d\n",
                        mmc_hostname(card->host), R1_CURRENT_STATE(status));
                err = -EINVAL;
                goto out;
        }

        err = mmc_send_hpi_cmd(card, &status);
        if (err)
                goto out;

        prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
        do {
                err = mmc_send_status(card, &status);

                if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
                        break;
                if (time_after(jiffies, prg_wait))
                        err = -ETIMEDOUT;
        } while (!err);

out:
        mmc_release_host(card->host);
        return err;
}
EXPORT_SYMBOL(mmc_interrupt_hpi);

/**
 *      mmc_wait_for_cmd - start a command and wait for completion
 *      @host: MMC host to start command
 *      @cmd: MMC command to start
 *      @retries: maximum number of retries
 *
 *      Start a new MMC command for a host, and wait for the command
 *      to complete.  Return any error that occurred while the command
 *      was executing.  Do not attempt to parse the response.
 */
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
{
        struct mmc_request mrq = {NULL};

        WARN_ON(!host->claimed);

        memset(cmd->resp, 0, sizeof(cmd->resp));
        cmd->retries = retries;

        mrq.cmd = cmd;
        cmd->data = NULL;

        mmc_wait_for_req(host, &mrq);

        return cmd->error;
}

EXPORT_SYMBOL(mmc_wait_for_cmd);

/**
 *      mmc_stop_bkops - stop ongoing BKOPS
 *      @card: MMC card to check BKOPS
 *
 *      Send HPI command to stop ongoing background operations to
 *      allow rapid servicing of foreground operations, e.g. read/
 *      writes. Wait until the card comes out of the programming state
 *      to avoid errors in servicing read/write requests.
 */
int mmc_stop_bkops(struct mmc_card *card)
{
        int err = 0;

        BUG_ON(!card);
        err = mmc_interrupt_hpi(card);

        /*
         * If err is EINVAL, we can't issue an HPI.
         * It should complete the BKOPS.
         */
        if (!err || (err == -EINVAL)) {
                mmc_card_clr_doing_bkops(card);
                err = 0;
        }

        return err;
}
EXPORT_SYMBOL(mmc_stop_bkops);

int mmc_read_bkops_status(struct mmc_card *card)
{
        int err;
        u8 *ext_csd;

        /*
         * In future work, we should consider storing the entire ext_csd.
         */
        ext_csd = kmalloc(512, GFP_KERNEL);
        if (!ext_csd) {
                pr_err("%s: could not allocate buffer to receive the ext_csd.\n",
                       mmc_hostname(card->host));
                return -ENOMEM;
        }

        mmc_claim_host(card->host);
        err = mmc_send_ext_csd(card, ext_csd);
        mmc_release_host(card->host);
        if (err)
                goto out;

        card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
        card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
out:
        kfree(ext_csd);
        return err;
}
EXPORT_SYMBOL(mmc_read_bkops_status);

/**
 *      mmc_set_data_timeout - set the timeout for a data command
 *      @data: data phase for command
 *      @card: the MMC card associated with the data transfer
 *
 *      Computes the data timeout parameters according to the
 *      correct algorithm given the card type.
 */
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
{
        unsigned int mult;

        /*
         * SDIO cards only define an upper 1 s limit on access.
         */
        if (mmc_card_sdio(card)) {
                data->timeout_ns = 1000000000;
                data->timeout_clks = 0;
                return;
        }

        /*
         * SD cards use a 100 multiplier rather than 10
         */
        mult = mmc_card_sd(card) ? 100 : 10;

        /*
         * Scale up the multiplier (and therefore the timeout) by
         * the r2w factor for writes.
         */
        if (data->flags & MMC_DATA_WRITE)
                mult <<= card->csd.r2w_factor;

        data->timeout_ns = card->csd.tacc_ns * mult;
        data->timeout_clks = card->csd.tacc_clks * mult;

        /*
         * SD cards also have an upper limit on the timeout.
         */
        if (mmc_card_sd(card)) {
                unsigned int timeout_us, limit_us;

                timeout_us = data->timeout_ns / 1000;
                if (mmc_host_clk_rate(card->host))
                        timeout_us += data->timeout_clks * 1000 /
                                (mmc_host_clk_rate(card->host) / 1000);

                if (data->flags & MMC_DATA_WRITE)
                        /*
                         * The MMC spec "It is strongly recommended
                         * for hosts to implement more than 500ms
                         * timeout value even if the card indicates
                         * the 250ms maximum busy length."  Even the
                         * previous value of 300ms is known to be
                         * insufficient for some cards.
                         */
                        limit_us = 3000000;
                else
                        limit_us = 100000;

                /*
                 * SDHC cards always use these fixed values.
                 */
                if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
                        data->timeout_ns = limit_us * 1000;
                        data->timeout_clks = 0;
                }
        }

        /*
         * Some cards require longer data read timeout than indicated in CSD.
         * Address this by setting the read timeout to a "reasonably high"
         * value. For the cards tested, 300ms has proven enough. If necessary,
         * this value can be increased if other problematic cards require this.
         */
        if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
                data->timeout_ns = 300000000;
                data->timeout_clks = 0;
        }

        /*
         * Some cards need very high timeouts if driven in SPI mode.
         * The worst observed timeout was 900ms after writing a
         * continuous stream of data until the internal logic
         * overflowed.
         */
        if (mmc_host_is_spi(card->host)) {
                if (data->flags & MMC_DATA_WRITE) {
                        if (data->timeout_ns < 1000000000)
                                data->timeout_ns = 1000000000;  /* 1s */
                } else {
                        if (data->timeout_ns < 100000000)
                                data->timeout_ns =  100000000;  /* 100ms */
                }
        }
}
EXPORT_SYMBOL(mmc_set_data_timeout);

/**
 *      mmc_align_data_size - pads a transfer size to a more optimal value
 *      @card: the MMC card associated with the data transfer
 *      @sz: original transfer size
 *
 *      Pads the original data size with a number of extra bytes in
 *      order to avoid controller bugs and/or performance hits
 *      (e.g. some controllers revert to PIO for certain sizes).
 *
 *      Returns the improved size, which might be unmodified.
 *
 *      Note that this function is only relevant when issuing a
 *      single scatter gather entry.
 */
unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
{
        /*
         * FIXME: We don't have a system for the controller to tell
         * the core about its problems yet, so for now we just 32-bit
         * align the size.
         */
        sz = ((sz + 3) / 4) * 4;

        return sz;
}
EXPORT_SYMBOL(mmc_align_data_size);

/**
 *      __mmc_claim_host - exclusively claim a host
 *      @host: mmc host to claim
 *      @abort: whether or not the operation should be aborted
 *
 *      Claim a host for a set of operations.  If @abort is non null and
 *      dereference a non-zero value then this will return prematurely with
 *      that non-zero value without acquiring the lock.  Returns zero
 *      with the lock held otherwise.
 */
int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
{
        DECLARE_WAITQUEUE(wait, current);
        unsigned long flags;
        int stop;

        might_sleep();

        add_wait_queue(&host->wq, &wait);
        spin_lock_irqsave(&host->lock, flags);
        while (1) {
                set_current_state(TASK_UNINTERRUPTIBLE);
                stop = abort ? atomic_read(abort) : 0;
                if (stop || !host->claimed || host->claimer == current)
                        break;
                spin_unlock_irqrestore(&host->lock, flags);
                schedule();
                spin_lock_irqsave(&host->lock, flags);
        }
        set_current_state(TASK_RUNNING);
        if (!stop) {
                host->claimed = 1;
                host->claimer = current;
                host->claim_cnt += 1;
        } else
                wake_up(&host->wq);
        spin_unlock_irqrestore(&host->lock, flags);
        remove_wait_queue(&host->wq, &wait);
        if (host->ops->enable && !stop && host->claim_cnt == 1)
                host->ops->enable(host);
        return stop;
}

EXPORT_SYMBOL(__mmc_claim_host);

/**
 *      mmc_try_claim_host - try exclusively to claim a host
 *      @host: mmc host to claim
 *
 *      Returns %1 if the host is claimed, %0 otherwise.
 */
int mmc_try_claim_host(struct mmc_host *host)
{
        int claimed_host = 0;
        unsigned long flags;

        spin_lock_irqsave(&host->lock, flags);
        if (!host->claimed || host->claimer == current) {
                host->claimed = 1;
                host->claimer = current;
                host->claim_cnt += 1;
                claimed_host = 1;
        }
        spin_unlock_irqrestore(&host->lock, flags);
        if (host->ops->enable && claimed_host && host->claim_cnt == 1)
                host->ops->enable(host);
        return claimed_host;
}
EXPORT_SYMBOL(mmc_try_claim_host);

/**
 *      mmc_release_host - release a host
 *      @host: mmc host to release
 *
 *      Release a MMC host, allowing others to claim the host
 *      for their operations.
 */
void mmc_release_host(struct mmc_host *host)
{
        unsigned long flags;

        WARN_ON(!host->claimed);

        if (host->ops->disable && host->claim_cnt == 1)
                host->ops->disable(host);

        spin_lock_irqsave(&host->lock, flags);
        if (--host->claim_cnt) {
                /* Release for nested claim */
                spin_unlock_irqrestore(&host->lock, flags);
        } else {
                host->claimed = 0;
                host->claimer = NULL;
                spin_unlock_irqrestore(&host->lock, flags);
                wake_up(&host->wq);
        }
}
EXPORT_SYMBOL(mmc_release_host);

/*
 * This is a helper function, which fetches a runtime pm reference for the
 * card device and also claims the host.
 */
void mmc_get_card(struct mmc_card *card)
{
        pm_runtime_get_sync(&card->dev);
        mmc_claim_host(card->host);
}
EXPORT_SYMBOL(mmc_get_card);

/*
 * This is a helper function, which releases the host and drops the runtime
 * pm reference for the card device.
 */
void mmc_put_card(struct mmc_card *card)
{
        mmc_release_host(card->host);
        pm_runtime_mark_last_busy(&card->dev);
        pm_runtime_put_autosuspend(&card->dev);
}
EXPORT_SYMBOL(mmc_put_card);

/*
 * Internal function that does the actual ios call to the host driver,
 * optionally printing some debug output.
 */
static inline void mmc_set_ios(struct mmc_host *host)
{
        struct mmc_ios *ios = &host->ios;

        pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
                "width %u timing %u\n",
                 mmc_hostname(host), ios->clock, ios->bus_mode,
                 ios->power_mode, ios->chip_select, ios->vdd,
                 ios->bus_width, ios->timing);

        if (ios->clock > 0)
                mmc_set_ungated(host);
        host->ops->set_ios(host, ios);
}

/*
 * Control chip select pin on a host.
 */
void mmc_set_chip_select(struct mmc_host *host, int mode)
{
        mmc_host_clk_hold(host);
        host->ios.chip_select = mode;
        mmc_set_ios(host);
        mmc_host_clk_release(host);
}

/*
 * Sets the host clock to the highest possible frequency that
 * is below "hz".
 */
static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
        WARN_ON(hz < host->f_min);

        if (hz > host->f_max)
                hz = host->f_max;

        host->ios.clock = hz;
        mmc_set_ios(host);
}

void mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
        mmc_host_clk_hold(host);
        __mmc_set_clock(host, hz);
        mmc_host_clk_release(host);
}

#ifdef CONFIG_MMC_CLKGATE
/*
 * This gates the clock by setting it to 0 Hz.
 */
void mmc_gate_clock(struct mmc_host *host)
{
        unsigned long flags;

        spin_lock_irqsave(&host->clk_lock, flags);
        host->clk_old = host->ios.clock;
        host->ios.clock = 0;
        host->clk_gated = true;
        spin_unlock_irqrestore(&host->clk_lock, flags);
        mmc_set_ios(host);
}

/*
 * This restores the clock from gating by using the cached
 * clock value.
 */
void mmc_ungate_clock(struct mmc_host *host)
{
        /*
         * We should previously have gated the clock, so the clock shall
         * be 0 here! The clock may however be 0 during initialization,
         * when some request operations are performed before setting
         * the frequency. When ungate is requested in that situation
         * we just ignore the call.
         */
        if (host->clk_old) {
                BUG_ON(host->ios.clock);
                /* This call will also set host->clk_gated to false */
                __mmc_set_clock(host, host->clk_old);
        }
}

void mmc_set_ungated(struct mmc_host *host)
{
        unsigned long flags;

        /*
         * We've been given a new frequency while the clock is gated,
         * so make sure we regard this as ungating it.
         */
        spin_lock_irqsave(&host->clk_lock, flags);
        host->clk_gated = false;
        spin_unlock_irqrestore(&host->clk_lock, flags);
}

#else
void mmc_set_ungated(struct mmc_host *host)
{
}
#endif

/*
 * Change the bus mode (open drain/push-pull) of a host.
 */
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
        mmc_host_clk_hold(host);
        host->ios.bus_mode = mode;
        mmc_set_ios(host);
        mmc_host_clk_release(host);
}

/*
 * Change data bus width of a host.
 */
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
        mmc_host_clk_hold(host);
        host->ios.bus_width = width;
        mmc_set_ios(host);
        mmc_host_clk_release(host);
}

/**
 * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
 * @vdd:        voltage (mV)
 * @low_bits:   prefer low bits in boundary cases
 *
 * This function returns the OCR bit number according to the provided @vdd
 * value. If conversion is not possible a negative errno value returned.
 *
 * Depending on the @low_bits flag the function prefers low or high OCR bits
 * on boundary voltages. For example,
 * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
 * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
 *
 * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
 */
static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
{
        const int max_bit = ilog2(MMC_VDD_35_36);
        int bit;

        if (vdd < 1650 || vdd > 3600)
                return -EINVAL;

        if (vdd >= 1650 && vdd <= 1950)
                return ilog2(MMC_VDD_165_195);

        if (low_bits)
                vdd -= 1;

        /* Base 2000 mV, step 100 mV, bit's base 8. */
        bit = (vdd - 2000) / 100 + 8;
        if (bit > max_bit)
                return max_bit;
        return bit;
}

/**
 * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
 * @vdd_min:    minimum voltage value (mV)
 * @vdd_max:    maximum voltage value (mV)
 *
 * This function returns the OCR mask bits according to the provided @vdd_min
 * and @vdd_max values. If conversion is not possible the function returns 0.
 *
 * Notes wrt boundary cases:
 * This function sets the OCR bits for all boundary voltages, for example
 * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
 * MMC_VDD_34_35 mask.
 */
u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
{
        u32 mask = 0;

        if (vdd_max < vdd_min)
                return 0;

        /* Prefer high bits for the boundary vdd_max values. */
        vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
        if (vdd_max < 0)
                return 0;

        /* Prefer low bits for the boundary vdd_min values. */
        vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
        if (vdd_min < 0)
                return 0;

        /* Fill the mask, from max bit to min bit. */
        while (vdd_max >= vdd_min)
                mask |= 1 << vdd_max--;

        return mask;
}
EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);

#ifdef CONFIG_REGULATOR

/**
 * mmc_regulator_get_ocrmask - return mask of supported voltages
 * @supply: regulator to use
 *
 * This returns either a negative errno, or a mask of voltages that
 * can be provided to MMC/SD/SDIO devices using the specified voltage
 * regulator.  This would normally be called before registering the
 * MMC host adapter.
 */
int mmc_regulator_get_ocrmask(struct regulator *supply)
{
        int                     result = 0;
        int                     count;
        int                     i;

        count = regulator_count_voltages(supply);
        if (count < 0)
                return count;

        for (i = 0; i < count; i++) {
                int             vdd_uV;
                int             vdd_mV;

                vdd_uV = regulator_list_voltage(supply, i);
                if (vdd_uV <= 0)
                        continue;

                vdd_mV = vdd_uV / 1000;
                result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
        }

        return result;
}
EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);

/**
 * mmc_regulator_set_ocr - set regulator to match host->ios voltage
 * @mmc: the host to regulate
 * @supply: regulator to use
 * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
 *
 * Returns zero on success, else negative errno.
 *
 * MMC host drivers may use this to enable or disable a regulator using
 * a particular supply voltage.  This would normally be called from the
 * set_ios() method.
 */
int mmc_regulator_set_ocr(struct mmc_host *mmc,
                        struct regulator *supply,
                        unsigned short vdd_bit)
{
        int                     result = 0;
        int                     min_uV, max_uV;

        if (vdd_bit) {
                int             tmp;
                int             voltage;

                /*
                 * REVISIT mmc_vddrange_to_ocrmask() may have set some
                 * bits this regulator doesn't quite support ... don't
                 * be too picky, most cards and regulators are OK with
                 * a 0.1V range goof (it's a small error percentage).
                 */
                tmp = vdd_bit - ilog2(MMC_VDD_165_195);
                if (tmp == 0) {
                        min_uV = 1650 * 1000;
                        max_uV = 1950 * 1000;
                } else {
                        min_uV = 1900 * 1000 + tmp * 100 * 1000;
                        max_uV = min_uV + 100 * 1000;
                }

                /*
                 * If we're using a fixed/static regulator, don't call
                 * regulator_set_voltage; it would fail.
                 */
                voltage = regulator_get_voltage(supply);

                if (!regulator_can_change_voltage(supply))
                        min_uV = max_uV = voltage;

                if (voltage < 0)
                        result = voltage;
                else if (voltage < min_uV || voltage > max_uV)
                        result = regulator_set_voltage(supply, min_uV, max_uV);
                else
                        result = 0;

                if (result == 0 && !mmc->regulator_enabled) {
                        result = regulator_enable(supply);
                        if (!result)
                                mmc->regulator_enabled = true;
                }
        } else if (mmc->regulator_enabled) {
                result = regulator_disable(supply);
                if (result == 0)
                        mmc->regulator_enabled = false;
        }

        if (result)
                dev_err(mmc_dev(mmc),
                        "could not set regulator OCR (%d)\n", result);
        return result;
}
EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);

int mmc_regulator_get_supply(struct mmc_host *mmc)
{
        struct device *dev = mmc_dev(mmc);
        struct regulator *supply;
        int ret;

        supply = devm_regulator_get(dev, "vmmc");
        mmc->supply.vmmc = supply;
        mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");

        if (IS_ERR(supply))
                return PTR_ERR(supply);

        ret = mmc_regulator_get_ocrmask(supply);
        if (ret > 0)
                mmc->ocr_avail = ret;
        else
                dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);

        return 0;
}
EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);

#endif /* CONFIG_REGULATOR */

/*
 * Mask off any voltages we don't support and select
 * the lowest voltage
 */
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
{
        int bit;

        ocr &= host->ocr_avail;

        bit = ffs(ocr);
        if (bit) {
                bit -= 1;

                ocr &= 3 << bit;

                mmc_host_clk_hold(host);
                host->ios.vdd = bit;
                mmc_set_ios(host);
                mmc_host_clk_release(host);
        } else {
                pr_warning("%s: host doesn't support card's voltages\n",
                                mmc_hostname(host));
                ocr = 0;
        }

        return ocr;
}

int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
{
        int err = 0;
        int old_signal_voltage = host->ios.signal_voltage;

        host->ios.signal_voltage = signal_voltage;
        if (host->ops->start_signal_voltage_switch) {
                mmc_host_clk_hold(host);
                err = host->ops->start_signal_voltage_switch(host, &host->ios);
                mmc_host_clk_release(host);
        }

        if (err)
                host->ios.signal_voltage = old_signal_voltage;

        return err;

}

int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
{
        struct mmc_command cmd = {0};
        int err = 0;
        u32 clock;

        BUG_ON(!host);

        /*
         * Send CMD11 only if the request is to switch the card to
         * 1.8V signalling.
         */
        if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
                return __mmc_set_signal_voltage(host, signal_voltage);

        /*
         * If we cannot switch voltages, return failure so the caller
         * can continue without UHS mode
         */
        if (!host->ops->start_signal_voltage_switch)
                return -EPERM;
        if (!host->ops->card_busy)
                pr_warning("%s: cannot verify signal voltage switch\n",
                                mmc_hostname(host));

        cmd.opcode = SD_SWITCH_VOLTAGE;
        cmd.arg = 0;
        cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

        err = mmc_wait_for_cmd(host, &cmd, 0);
        if (err)
                return err;

        if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
                return -EIO;

        mmc_host_clk_hold(host);
        /*
         * The card should drive cmd and dat[0:3] low immediately
         * after the response of cmd11, but wait 1 ms to be sure
         */
        mmc_delay(1);
        if (host->ops->card_busy && !host->ops->card_busy(host)) {
                err = -EAGAIN;
                goto power_cycle;
        }
        /*
         * During a signal voltage level switch, the clock must be gated
         * for 5 ms according to the SD spec
         */
        clock = host->ios.clock;
        host->ios.clock = 0;
        mmc_set_ios(host);

        if (__mmc_set_signal_voltage(host, signal_voltage)) {
                /*
                 * Voltages may not have been switched, but we've already
                 * sent CMD11, so a power cycle is required anyway
                 */
                err = -EAGAIN;
                goto power_cycle;
        }

        /* Keep clock gated for at least 5 ms */
        mmc_delay(5);
        host->ios.clock = clock;
        mmc_set_ios(host);

        /* Wait for at least 1 ms according to spec */
        mmc_delay(1);

        /*
         * Failure to switch is indicated by the card holding
         * dat[0:3] low
         */
        if (host->ops->card_busy && host->ops->card_busy(host))
                err = -EAGAIN;

power_cycle:
        if (err) {
                pr_debug("%s: Signal voltage switch failed, "
                        "power cycling card\n", mmc_hostname(host));
                mmc_power_cycle(host);
        }

        mmc_host_clk_release(host);

        return err;
}

/*
 * Select timing parameters for host.
 */
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
{
        mmc_host_clk_hold(host);
        host->ios.timing = timing;
        mmc_set_ios(host);
        mmc_host_clk_release(host);
}

/*
 * Select appropriate driver type for host.
 */
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
{
        mmc_host_clk_hold(host);
        host->ios.drv_type = drv_type;
        mmc_set_ios(host);
        mmc_host_clk_release(host);
}

/*
 * Apply power to the MMC stack.  This is a two-stage process.
 * First, we enable power to the card without the clock running.
 * We then wait a bit for the power to stabilise.  Finally,
 * enable the bus drivers and clock to the card.
 *
 * We must _NOT_ enable the clock prior to power stablising.
 *
 * If a host does all the power sequencing itself, ignore the
 * initial MMC_POWER_UP stage.
 */
void mmc_power_up(struct mmc_host *host)
{
        int bit;

        if (host->ios.power_mode == MMC_POWER_ON)
                return;

        mmc_host_clk_hold(host);

        /* If ocr is set, we use it */
        if (host->ocr)
                bit = ffs(host->ocr) - 1;
        else
                bit = fls(host->ocr_avail) - 1;

        host->ios.vdd = bit;
        if (mmc_host_is_spi(host))
                host->ios.chip_select = MMC_CS_HIGH;
        else
                host->ios.chip_select = MMC_CS_DONTCARE;
        host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
        host->ios.power_mode = MMC_POWER_UP;
        host->ios.bus_width = MMC_BUS_WIDTH_1;
        host->ios.timing = MMC_TIMING_LEGACY;
        mmc_set_ios(host);

        /* Set signal voltage to 3.3V */
        __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);

        /*
         * This delay should be sufficient to allow the power supply
         * to reach the minimum voltage.
         */
        mmc_delay(10);

        host->ios.clock = host->f_init;

        host->ios.power_mode = MMC_POWER_ON;
        mmc_set_ios(host);

        /*
         * This delay must be at least 74 clock sizes, or 1 ms, or the
         * time required to reach a stable voltage.
         */
        mmc_delay(10);

        mmc_host_clk_release(host);
}

void mmc_power_off(struct mmc_host *host)
{
        if (host->ios.power_mode == MMC_POWER_OFF)
                return;

        mmc_host_clk_hold(host);

        host->ios.clock = 0;
        host->ios.vdd = 0;


        /*
         * Reset ocr mask to be the highest possible voltage supported for
         * this mmc host. This value will be used at next power up.
         */
        host->ocr = 1 << (fls(host->ocr_avail) - 1);

        if (!mmc_host_is_spi(host)) {
                host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
                host->ios.chip_select = MMC_CS_DONTCARE;
        }
        host->ios.power_mode = MMC_POWER_OFF;
        host->ios.bus_width = MMC_BUS_WIDTH_1;
        host->ios.timing = MMC_TIMING_LEGACY;
        mmc_set_ios(host);

        /*
         * Some configurations, such as the 802.11 SDIO card in the OLPC
         * XO-1.5, require a short delay after poweroff before the card
         * can be successfully turned on again.
         */
        mmc_delay(1);

        mmc_host_clk_release(host);
}

void mmc_power_cycle(struct mmc_host *host)
{
        mmc_power_off(host);
        /* Wait at least 1 ms according to SD spec */
        mmc_delay(1);
        mmc_power_up(host);
}

/*
 * Cleanup when the last reference to the bus operator is dropped.
 */
static void __mmc_release_bus(struct mmc_host *host)
{
        BUG_ON(!host);
        BUG_ON(host->bus_refs);
        BUG_ON(!host->bus_dead);

        host->bus_ops = NULL;
}

/*
 * Increase reference count of bus operator
 */
static inline void mmc_bus_get(struct mmc_host *host)
{
        unsigned long flags;

        spin_lock_irqsave(&host->lock, flags);
        host->bus_refs++;
        spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Decrease reference count of bus operator and free it if
 * it is the last reference.
 */
static inline void mmc_bus_put(struct mmc_host *host)
{
        unsigned long flags;

        spin_lock_irqsave(&host->lock, flags);
        host->bus_refs--;
        if ((host->bus_refs == 0) && host->bus_ops)
                __mmc_release_bus(host);
        spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Assign a mmc bus handler to a host. Only one bus handler may control a
 * host at any given time.
 */
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
{
        unsigned long flags;

        BUG_ON(!host);
        BUG_ON(!ops);

        WARN_ON(!host->claimed);

        spin_lock_irqsave(&host->lock, flags);

        BUG_ON(host->bus_ops);
        BUG_ON(host->bus_refs);

        host->bus_ops = ops;
        host->bus_refs = 1;
        host->bus_dead = 0;

        spin_unlock_irqrestore(&host->lock, flags);
}

/*
 * Remove the current bus handler from a host.
 */
void mmc_detach_bus(struct mmc_host *host)
{
        unsigned long flags;

        BUG_ON(!host);

        WARN_ON(!host->claimed);
        WARN_ON(!host->bus_ops);

        spin_lock_irqsave(&host->lock, flags);

        host->bus_dead = 1;

        spin_unlock_irqrestore(&host->lock, flags);

        mmc_bus_put(host);
}

/**
 *      mmc_detect_change - process change of state on a MMC socket
 *      @host: host which changed state.
 *      @delay: optional delay to wait before detection (jiffies)
 *
 *      MMC drivers should call this when they detect a card has been
 *      inserted or removed. The MMC layer will confirm that any
 *      present card is still functional, and initialize any newly
 *      inserted.
 */
void mmc_detect_change(struct mmc_host *host, unsigned long delay)
{
#ifdef CONFIG_MMC_DEBUG
        unsigned long flags;
        spin_lock_irqsave(&host->lock, flags);
        WARN_ON(host->removed);
        spin_unlock_irqrestore(&host->lock, flags);
#endif
        host->detect_change = 1;
        mmc_schedule_delayed_work(&host->detect, delay);
}

EXPORT_SYMBOL(mmc_detect_change);

void mmc_init_erase(struct mmc_card *card)
{
        unsigned int sz;

        if (is_power_of_2(card->erase_size))
                card->erase_shift = ffs(card->erase_size) - 1;
        else
                card->erase_shift = 0;

        /*
         * It is possible to erase an arbitrarily large area of an SD or MMC
         * card.  That is not desirable because it can take a long time
         * (minutes) potentially delaying more important I/O, and also the
         * timeout calculations become increasingly hugely over-estimated.
         * Consequently, 'pref_erase' is defined as a guide to limit erases
         * to that size and alignment.
         *
         * For SD cards that define Allocation Unit size, limit erases to one
         * Allocation Unit at a time.  For MMC cards that define High Capacity
         * Erase Size, whether it is switched on or not, limit to that size.
         * Otherwise just have a stab at a good value.  For modern cards it
         * will end up being 4MiB.  Note that if the value is too small, it
         * can end up taking longer to erase.
         */
        if (mmc_card_sd(card) && card->ssr.au) {
                card->pref_erase = card->ssr.au;
                card->erase_shift = ffs(card->ssr.au) - 1;
        } else if (card->ext_csd.hc_erase_size) {
                card->pref_erase = card->ext_csd.hc_erase_size;
        } else {
                sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
                if (sz < 128)
                        card->pref_erase = 512 * 1024 / 512;
                else if (sz < 512)
                        card->pref_erase = 1024 * 1024 / 512;
                else if (sz < 1024)
                        card->pref_erase = 2 * 1024 * 1024 / 512;
                else
                        card->pref_erase = 4 * 1024 * 1024 / 512;
                if (card->pref_erase < card->erase_size)
                        card->pref_erase = card->erase_size;
                else {
                        sz = card->pref_erase % card->erase_size;
                        if (sz)
                                card->pref_erase += card->erase_size - sz;
                }
        }
}

static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
                                          unsigned int arg, unsigned int qty)
{
        unsigned int erase_timeout;

        if (arg == MMC_DISCARD_ARG ||
            (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) {
                erase_timeout = card->ext_csd.trim_timeout;
        } else if (card->ext_csd.erase_group_def & 1) {
                /* High Capacity Erase Group Size uses HC timeouts */
                if (arg == MMC_TRIM_ARG)
                        erase_timeout = card->ext_csd.trim_timeout;
                else
                        erase_timeout = card->ext_csd.hc_erase_timeout;
        } else {
                /* CSD Erase Group Size uses write timeout */
                unsigned int mult = (10 << card->csd.r2w_factor);
                unsigned int timeout_clks = card->csd.tacc_clks * mult;
                unsigned int timeout_us;

                /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
                if (card->csd.tacc_ns < 1000000)
                        timeout_us = (card->csd.tacc_ns * mult) / 1000;
                else
                        timeout_us = (card->csd.tacc_ns / 1000) * mult;

                /*
                 * ios.clock is only a target.  The real clock rate might be
                 * less but not that much less, so fudge it by multiplying by 2.
                 */
                timeout_clks <<= 1;
                timeout_us += (timeout_clks * 1000) /
                              (mmc_host_clk_rate(card->host) / 1000);

                erase_timeout = timeout_us / 1000;

                /*
                 * Theoretically, the calculation could underflow so round up
                 * to 1ms in that case.
                 */
                if (!erase_timeout)
                        erase_timeout = 1;
        }

        /* Multiplier for secure operations */
        if (arg & MMC_SECURE_ARGS) {
                if (arg == MMC_SECURE_ERASE_ARG)
                        erase_timeout *= card->ext_csd.sec_erase_mult;
                else
                        erase_timeout *= card->ext_csd.sec_trim_mult;
        }

        erase_timeout *= qty;

        /*
         * Ensure at least a 1 second timeout for SPI as per
         * 'mmc_set_data_timeout()'
         */
        if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
                erase_timeout = 1000;

        return erase_timeout;
}

static unsigned int mmc_sd_erase_timeout(struct mmc_card *card,
                                         unsigned int arg,
                                         unsigned int qty)
{
        unsigned int erase_timeout;

        if (card->ssr.erase_timeout) {
                /* Erase timeout specified in SD Status Register (SSR) */
                erase_timeout = card->ssr.erase_timeout * qty +
                                card->ssr.erase_offset;
        } else {
                /*
                 * Erase timeout not specified in SD Status Register (SSR) so
                 * use 250ms per write block.
                 */
                erase_timeout = 250 * qty;
        }

        /* Must not be less than 1 second */
        if (erase_timeout < 1000)
                erase_timeout = 1000;

        return erase_timeout;
}

static unsigned int mmc_erase_timeout(struct mmc_card *card,
                                      unsigned int arg,
                                      unsigned int qty)
{
        if (mmc_card_sd(card))
                return mmc_sd_erase_timeout(card, arg, qty);
        else
                return mmc_mmc_erase_timeout(card, arg, qty);
}

static int mmc_do_erase(struct mmc_card *card, unsigned int from,
                        unsigned int to, unsigned int arg)
{
        struct mmc_command cmd = {0};
        unsigned int qty = 0;
        unsigned long timeout;
        int err;

        /*
         * qty is used to calculate the erase timeout which depends on how many
         * erase groups (or allocation units in SD terminology) are affected.
         * We count erasing part of an erase group as one erase group.
         * For SD, the allocation units are always a power of 2.  For MMC, the
         * erase group size is almost certainly also power of 2, but it does not
         * seem to insist on that in the JEDEC standard, so we fall back to
         * division in that case.  SD may not specify an allocation unit size,
         * in which case the timeout is based on the number of write blocks.
         *
         * Note that the timeout for secure trim 2 will only be correct if the
         * number of erase groups specified is the same as the total of all
         * preceding secure trim 1 commands.  Since the power may have been
         * lost since the secure trim 1 commands occurred, it is generally
         * impossible to calculate the secure trim 2 timeout correctly.
         */
        if (card->erase_shift)
                qty += ((to >> card->erase_shift) -
                        (from >> card->erase_shift)) + 1;
        else if (mmc_card_sd(card))
                qty += to - from + 1;
        else
                qty += ((to / card->erase_size) -
                        (from / card->erase_size)) + 1;

        if (!mmc_card_blockaddr(card)) {
                from <<= 9;
                to <<= 9;
        }

        if (mmc_card_sd(card))
                cmd.opcode = SD_ERASE_WR_BLK_START;
        else
                cmd.opcode = MMC_ERASE_GROUP_START;
        cmd.arg = from;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
        err = mmc_wait_for_cmd(card->host, &cmd, 0);
        if (err) {
                pr_err("mmc_erase: group start error %d, "
                       "status %#x\n", err, cmd.resp[0]);
                err = -EIO;
                goto out;
        }

        memset(&cmd, 0, sizeof(struct mmc_command));
        if (mmc_card_sd(card))
                cmd.opcode = SD_ERASE_WR_BLK_END;
        else
                cmd.opcode = MMC_ERASE_GROUP_END;
        cmd.arg = to;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
        err = mmc_wait_for_cmd(card->host, &cmd, 0);
        if (err) {
                pr_err("mmc_erase: group end error %d, status %#x\n",
                       err, cmd.resp[0]);
                err = -EIO;
                goto out;
        }

        memset(&cmd, 0, sizeof(struct mmc_command));
        cmd.opcode = MMC_ERASE;
        cmd.arg = arg;
        cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
        cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
        err = mmc_wait_for_cmd(card->host, &cmd, 0);
        if (err) {
                pr_err("mmc_erase: erase error %d, status %#x\n",
                       err, cmd.resp[0]);
                err = -EIO;
                goto out;
        }

        if (mmc_host_is_spi(card->host))
                goto out;

        timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
        do {
                memset(&cmd, 0, sizeof(struct mmc_command));
                cmd.opcode = MMC_SEND_STATUS;
                cmd.arg = card->rca << 16;
                cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
                /* Do not retry else we can't see errors */
                err = mmc_wait_for_cmd(card->host, &cmd, 0);
                if (err || (cmd.resp[0] & 0xFDF92000)) {
                        pr_err("error %d requesting status %#x\n",
                                err, cmd.resp[0]);
                        err = -EIO;
                        goto out;
                }

                /* Timeout if the device never becomes ready for data and
                 * never leaves the program state.
                 */
                if (time_after(jiffies, timeout)) {
                        pr_err("%s: Card stuck in programming state! %s\n",
                                mmc_hostname(card->host), __func__);
                        err =  -EIO;
                        goto out;
                }

        } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
                 (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
out:
        return err;
}

/**
 * mmc_erase - erase sectors.
 * @card: card to erase
 * @from: first sector to erase
 * @nr: number of sectors to erase
 * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
 *
 * Caller must claim host before calling this function.
 */
int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
              unsigned int arg)
{
        unsigned int rem, to = from + nr;

        if (!(card->host->caps & MMC_CAP_ERASE) ||
            !(card->csd.cmdclass & CCC_ERASE))
                return -EOPNOTSUPP;

        if (!card->erase_size)
                return -EOPNOTSUPP;

        if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
                return -EOPNOTSUPP;

        if ((arg & MMC_SECURE_ARGS) &&
            !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
                return -EOPNOTSUPP;

        if ((arg & MMC_TRIM_ARGS) &&
            !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
                return -EOPNOTSUPP;

        if (arg == MMC_SECURE_ERASE_ARG) {
                if (from % card->erase_size || nr % card->erase_size)
                        return -EINVAL;
        }

        if (arg == MMC_ERASE_ARG) {
                rem = from % card->erase_size;
                if (rem) {
                        rem = card->erase_size - rem;
                        from += rem;
                        if (nr > rem)
                                nr -= rem;
                        else
                                return 0;
                }
                rem = nr % card->erase_size;
                if (rem)
                        nr -= rem;
        }

        if (nr == 0)
                return 0;

        to = from + nr;

        if (to <= from)
                return -EINVAL;

        /* 'from' and 'to' are inclusive */
        to -= 1;

        return mmc_do_erase(card, from, to, arg);
}
EXPORT_SYMBOL(mmc_erase);

int mmc_can_erase(struct mmc_card *card)
{
        if ((card->host->caps & MMC_CAP_ERASE) &&
            (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
                return 1;
        return 0;
}
EXPORT_SYMBOL(mmc_can_erase);

int mmc_can_trim(struct mmc_card *card)
{
        if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
                return 1;
        return 0;
}
EXPORT_SYMBOL(mmc_can_trim);

int mmc_can_discard(struct mmc_card *card)
{
        /*
         * As there's no way to detect the discard support bit at v4.5
         * use the s/w feature support filed.
         */
        if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE)
                return 1;
        return 0;
}
EXPORT_SYMBOL(mmc_can_discard);

int mmc_can_sanitize(struct mmc_card *card)
{
        if (!mmc_can_trim(card) && !mmc_can_erase(card))
                return 0;
        if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
                return 1;
        return 0;
}
EXPORT_SYMBOL(mmc_can_sanitize);

int mmc_can_secure_erase_trim(struct mmc_card *card)
{
        if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
                return 1;
        return 0;
}
EXPORT_SYMBOL(mmc_can_secure_erase_trim);

int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
                            unsigned int nr)
{
        if (!card->erase_size)
                return 0;
        if (from % card->erase_size || nr % card->erase_size)
                return 0;
        return 1;
}
EXPORT_SYMBOL(mmc_erase_group_aligned);

static unsigned int mmc_do_calc_max_discard(struct mmc_card *card,
                                            unsigned int arg)
{
        struct mmc_host *host = card->host;
        unsigned int max_discard, x, y, qty = 0, max_qty, timeout;
        unsigned int last_timeout = 0;

        if (card->erase_shift)
                max_qty = UINT_MAX >> card->erase_shift;
        else if (mmc_card_sd(card))
                max_qty = UINT_MAX;
        else
                max_qty = UINT_MAX / card->erase_size;

        /* Find the largest qty with an OK timeout */
        do {
                y = 0;
                for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
                        timeout = mmc_erase_timeout(card, arg, qty + x);
                        if (timeout > host->max_discard_to)
                                break;
                        if (timeout < last_timeout)
                                break;
                        last_timeout = timeout;
                        y = x;
                }
                qty += y;
        } while (y);

        if (!qty)
                return 0;

        if (qty == 1)
                return 1;

        /* Convert qty to sectors */
        if (card->erase_shift)
                max_discard = --qty << card->erase_shift;
        else if (mmc_card_sd(card))
                max_discard = qty;
        else
                max_discard = --qty * card->erase_size;

        return max_discard;
}

unsigned int mmc_calc_max_discard(struct mmc_card *card)
{
        struct mmc_host *host = card->host;
        unsigned int max_discard, max_trim;

        if (!host->max_discard_to)
                return UINT_MAX;

        /*
         * Without erase_group_def set, MMC erase timeout depends on clock
         * frequence which can change.  In that case, the best choice is
         * just the preferred erase size.
         */
        if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1))
                return card->pref_erase;

        max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG);
        if (mmc_can_trim(card)) {
                max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG);
                if (max_trim < max_discard)
                        max_discard = max_trim;
        } else if (max_discard < card->erase_size) {
                max_discard = 0;
        }
        pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
                 mmc_hostname(host), max_discard, host->max_discard_to);
        return max_discard;
}
EXPORT_SYMBOL(mmc_calc_max_discard);

int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
{
        struct mmc_command cmd = {0};

        if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
                return 0;

        cmd.opcode = MMC_SET_BLOCKLEN;
        cmd.arg = blocklen;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
        return mmc_wait_for_cmd(card->host, &cmd, 5);
}
EXPORT_SYMBOL(mmc_set_blocklen);

int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
                        bool is_rel_write)
{
        struct mmc_command cmd = {0};

        cmd.opcode = MMC_SET_BLOCK_COUNT;
        cmd.arg = blockcount & 0x0000FFFF;
        if (is_rel_write)
                cmd.arg |= 1 << 31;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
        return mmc_wait_for_cmd(card->host, &cmd, 5);
}
EXPORT_SYMBOL(mmc_set_blockcount);

static void mmc_hw_reset_for_init(struct mmc_host *host)
{
        if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
                return;
        mmc_host_clk_hold(host);
        host->ops->hw_reset(host);
        mmc_host_clk_release(host);
}

int mmc_can_reset(struct mmc_card *card)
{
        u8 rst_n_function;

        if (!mmc_card_mmc(card))
                return 0;
        rst_n_function = card->ext_csd.rst_n_function;
        if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED)
                return 0;
        return 1;
}
EXPORT_SYMBOL(mmc_can_reset);

static int mmc_do_hw_reset(struct mmc_host *host, int check)
{
        struct mmc_card *card = host->card;

        if (!host->bus_ops->power_restore)
                return -EOPNOTSUPP;

        if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
                return -EOPNOTSUPP;

        if (!card)
                return -EINVAL;

        if (!mmc_can_reset(card))
                return -EOPNOTSUPP;

        mmc_host_clk_hold(host);
        mmc_set_clock(host, host->f_init);

        host->ops->hw_reset(host);

        /* If the reset has happened, then a status command will fail */
        if (check) {
                struct mmc_command cmd = {0};
                int err;

                cmd.opcode = MMC_SEND_STATUS;
                if (!mmc_host_is_spi(card->host))
                        cmd.arg = card->rca << 16;
                cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
                err = mmc_wait_for_cmd(card->host, &cmd, 0);
                if (!err) {
                        mmc_host_clk_release(host);
                        return -ENOSYS;
                }
        }

        host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
        if (mmc_host_is_spi(host)) {
                host->ios.chip_select = MMC_CS_HIGH;
                host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
        } else {
                host->ios.chip_select = MMC_CS_DONTCARE;
                host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
        }
        host->ios.bus_width = MMC_BUS_WIDTH_1;
        host->ios.timing = MMC_TIMING_LEGACY;
        mmc_set_ios(host);

        mmc_host_clk_release(host);

        return host->bus_ops->power_restore(host);
}

int mmc_hw_reset(struct mmc_host *host)
{
        return mmc_do_hw_reset(host, 0);
}
EXPORT_SYMBOL(mmc_hw_reset);

int mmc_hw_reset_check(struct mmc_host *host)
{
        return mmc_do_hw_reset(host, 1);
}
EXPORT_SYMBOL(mmc_hw_reset_check);

static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
        host->f_init = freq;

#ifdef CONFIG_MMC_DEBUG
        pr_info("%s: %s: trying to init card at %u Hz\n",
                mmc_hostname(host), __func__, host->f_init);
#endif
        mmc_power_up(host);

        /*
         * Some eMMCs (with VCCQ always on) may not be reset after power up, so
         * do a hardware reset if possible.
         */
        mmc_hw_reset_for_init(host);

        /*
         * sdio_reset sends CMD52 to reset card.  Since we do not know
         * if the card is being re-initialized, just send it.  CMD52
         * should be ignored by SD/eMMC cards.
         */
        sdio_reset(host);
        mmc_go_idle(host);

        mmc_send_if_cond(host, host->ocr_avail);

        /* Order's important: probe SDIO, then SD, then MMC */
        if (!mmc_attach_sdio(host))
                return 0;
        if (!mmc_attach_sd(host))
                return 0;
        if (!mmc_attach_mmc(host))
                return 0;

        mmc_power_off(host);
        return -EIO;
}

int _mmc_detect_card_removed(struct mmc_host *host)
{
        int ret;

        if ((host->caps & MMC_CAP_NONREMOVABLE) || !host->bus_ops->alive)
                return 0;

        if (!host->card || mmc_card_removed(host->card))
                return 1;

        ret = host->bus_ops->alive(host);

        /*
         * Card detect status and alive check may be out of sync if card is
         * removed slowly, when card detect switch changes while card/slot
         * pads are still contacted in hardware (refer to "SD Card Mechanical
         * Addendum, Appendix C: Card Detection Switch"). So reschedule a
         * detect work 200ms later for this case.
         */
        if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) {
                mmc_detect_change(host, msecs_to_jiffies(200));
                pr_debug("%s: card removed too slowly\n", mmc_hostname(host));
        }

        if (ret) {
                mmc_card_set_removed(host->card);
                pr_debug("%s: card remove detected\n", mmc_hostname(host));
        }

        return ret;
}

int mmc_detect_card_removed(struct mmc_host *host)
{
        struct mmc_card *card = host->card;
        int ret;

        WARN_ON(!host->claimed);

        if (!card)
                return 1;

        ret = mmc_card_removed(card);
        /*
         * The card will be considered unchanged unless we have been asked to
         * detect a change or host requires polling to provide card detection.
         */
        if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL))
                return ret;

        host->detect_change = 0;
        if (!ret) {
                ret = _mmc_detect_card_removed(host);
                if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) {
                        /*
                         * Schedule a detect work as soon as possible to let a
                         * rescan handle the card removal.
                         */
                        cancel_delayed_work(&host->detect);
                        mmc_detect_change(host, 0);
                }
        }

        return ret;
}
EXPORT_SYMBOL(mmc_detect_card_removed);

void mmc_rescan(struct work_struct *work)
{
        struct mmc_host *host =
                container_of(work, struct mmc_host, detect.work);
        int i;

        if (host->rescan_disable)
                return;

        /* If there is a non-removable card registered, only scan once */
        if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered)
                return;
        host->rescan_entered = 1;

        mmc_bus_get(host);

        /*
         * if there is a _removable_ card registered, check whether it is
         * still present
         */
        if (host->bus_ops && host->bus_ops->detect && !host->bus_dead
            && !(host->caps & MMC_CAP_NONREMOVABLE))
                host->bus_ops->detect(host);

        host->detect_change = 0;

        /*
         * Let mmc_bus_put() free the bus/bus_ops if we've found that
         * the card is no longer present.
         */
        mmc_bus_put(host);
        mmc_bus_get(host);

        /* if there still is a card present, stop here */
        if (host->bus_ops != NULL) {
                mmc_bus_put(host);
                goto out;
        }

        /*
         * Only we can add a new handler, so it's safe to
         * release the lock here.
         */
        mmc_bus_put(host);

        if (host->ops->get_cd && host->ops->get_cd(host) == 0) {
                mmc_claim_host(host);
                mmc_power_off(host);
                mmc_release_host(host);
                goto out;
        }

        mmc_claim_host(host);
        for (i = 0; i < ARRAY_SIZE(freqs); i++) {
                if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min)))
                        break;
                if (freqs[i] <= host->f_min)
                        break;
        }
        mmc_release_host(host);

 out:
        if (host->caps & MMC_CAP_NEEDS_POLL)
                mmc_schedule_delayed_work(&host->detect, HZ);
}

void mmc_start_host(struct mmc_host *host)
{
        host->f_init = max(freqs[0], host->f_min);
        host->rescan_disable = 0;
        if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
                mmc_power_off(host);
        else
                mmc_power_up(host);
        mmc_detect_change(host, 0);
}

void mmc_stop_host(struct mmc_host *host)
{
#ifdef CONFIG_MMC_DEBUG
        unsigned long flags;
        spin_lock_irqsave(&host->lock, flags);
        host->removed = 1;
        spin_unlock_irqrestore(&host->lock, flags);
#endif

        host->rescan_disable = 1;
        cancel_delayed_work_sync(&host->detect);
        mmc_flush_scheduled_work();

        /* clear pm flags now and let card drivers set them as needed */
        host->pm_flags = 0;

        mmc_bus_get(host);
        if (host->bus_ops && !host->bus_dead) {
                /* Calling bus_ops->remove() with a claimed host can deadlock */
                host->bus_ops->remove(host);
                mmc_claim_host(host);
                mmc_detach_bus(host);
                mmc_power_off(host);
                mmc_release_host(host);
                mmc_bus_put(host);
                return;
        }
        mmc_bus_put(host);

        BUG_ON(host->card);

        mmc_power_off(host);
}

int mmc_power_save_host(struct mmc_host *host)
{
        int ret = 0;

#ifdef CONFIG_MMC_DEBUG
        pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__);
#endif

        mmc_bus_get(host);

        if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
                mmc_bus_put(host);
                return -EINVAL;
        }

        if (host->bus_ops->power_save)
                ret = host->bus_ops->power_save(host);

        mmc_bus_put(host);

        mmc_power_off(host);

        return ret;
}
EXPORT_SYMBOL(mmc_power_save_host);

int mmc_power_restore_host(struct mmc_host *host)
{
        int ret;

#ifdef CONFIG_MMC_DEBUG
        pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__);
#endif

        mmc_bus_get(host);

        if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
                mmc_bus_put(host);
                return -EINVAL;
        }

        mmc_power_up(host);
        ret = host->bus_ops->power_restore(host);

        mmc_bus_put(host);

        return ret;
}
EXPORT_SYMBOL(mmc_power_restore_host);

/*
 * Flush the cache to the non-volatile storage.
 */
int mmc_flush_cache(struct mmc_card *card)
{
        struct mmc_host *host = card->host;
        int err = 0;

        if (!(host->caps2 & MMC_CAP2_CACHE_CTRL))
                return err;

        if (mmc_card_mmc(card) &&
                        (card->ext_csd.cache_size > 0) &&
                        (card->ext_csd.cache_ctrl & 1)) {
                err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
                                EXT_CSD_FLUSH_CACHE, 1, 0);
                if (err)
                        pr_err("%s: cache flush error %d\n",
                                        mmc_hostname(card->host), err);
        }

        return err;
}
EXPORT_SYMBOL(mmc_flush_cache);

/*
 * Turn the cache ON/OFF.
 * Turning the cache OFF shall trigger flushing of the data
 * to the non-volatile storage.
 * This function should be called with host claimed
 */
int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
{
        struct mmc_card *card = host->card;
        unsigned int timeout;
        int err = 0;

        if (!(host->caps2 & MMC_CAP2_CACHE_CTRL) ||
                        mmc_card_is_removable(host))
                return err;

        if (card && mmc_card_mmc(card) &&
                        (card->ext_csd.cache_size > 0)) {
                enable = !!enable;

                if (card->ext_csd.cache_ctrl ^ enable) {
                        timeout = enable ? card->ext_csd.generic_cmd6_time : 0;
                        err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
                                        EXT_CSD_CACHE_CTRL, enable, timeout);
                        if (err)
                                pr_err("%s: cache %s error %d\n",
                                                mmc_hostname(card->host),
                                                enable ? "on" : "off",
                                                err);
                        else
                                card->ext_csd.cache_ctrl = enable;
                }
        }

        return err;
}
EXPORT_SYMBOL(mmc_cache_ctrl);

#ifdef CONFIG_PM

/**
 *      mmc_suspend_host - suspend a host
 *      @host: mmc host
 */
int mmc_suspend_host(struct mmc_host *host)
{
        /* This function is deprecated */
        return 0;
}
EXPORT_SYMBOL(mmc_suspend_host);

/**
 *      mmc_resume_host - resume a previously suspended host
 *      @host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
        /* This function is deprecated */
        return 0;
}
EXPORT_SYMBOL(mmc_resume_host);

/* Do the card removal on suspend if card is assumed removeable
 * Do that in pm notifier while userspace isn't yet frozen, so we will be able
   to sync the card.
*/
int mmc_pm_notify(struct notifier_block *notify_block,
                                        unsigned long mode, void *unused)
{
        struct mmc_host *host = container_of(
                notify_block, struct mmc_host, pm_notify);
        unsigned long flags;
        int err = 0;

        switch (mode) {
        case PM_HIBERNATION_PREPARE:
        case PM_SUSPEND_PREPARE:
                spin_lock_irqsave(&host->lock, flags);
                host->rescan_disable = 1;
                spin_unlock_irqrestore(&host->lock, flags);
                cancel_delayed_work_sync(&host->detect);

                if (!host->bus_ops)
                        break;

                /* Validate prerequisites for suspend */
                if (host->bus_ops->pre_suspend)
                        err = host->bus_ops->pre_suspend(host);
                if (!err && host->bus_ops->suspend)
                        break;

                /* Calling bus_ops->remove() with a claimed host can deadlock */
                host->bus_ops->remove(host);
                mmc_claim_host(host);
                mmc_detach_bus(host);
                mmc_power_off(host);
                mmc_release_host(host);
                host->pm_flags = 0;
                break;

        case PM_POST_SUSPEND:
        case PM_POST_HIBERNATION:
        case PM_POST_RESTORE:

                spin_lock_irqsave(&host->lock, flags);
                host->rescan_disable = 0;
                spin_unlock_irqrestore(&host->lock, flags);
                mmc_detect_change(host, 0);

        }

        return 0;
}
#endif

/**
 * mmc_init_context_info() - init synchronization context
 * @host: mmc host
 *
 * Init struct context_info needed to implement asynchronous
 * request mechanism, used by mmc core, host driver and mmc requests
 * supplier.
 */
void mmc_init_context_info(struct mmc_host *host)
{
        spin_lock_init(&host->context_info.lock);
        host->context_info.is_new_req = false;
        host->context_info.is_done_rcv = false;
        host->context_info.is_waiting_last_req = false;
        init_waitqueue_head(&host->context_info.wait);
}

static int __init mmc_init(void)
{
        int ret;

        workqueue = alloc_ordered_workqueue("kmmcd", 0);
        if (!workqueue)
                return -ENOMEM;

        ret = mmc_register_bus();
        if (ret)
                goto destroy_workqueue;

        ret = mmc_register_host_class();
        if (ret)
                goto unregister_bus;

        ret = sdio_register_bus();
        if (ret)
                goto unregister_host_class;

        return 0;

unregister_host_class:
        mmc_unregister_host_class();
unregister_bus:
        mmc_unregister_bus();
destroy_workqueue:
        destroy_workqueue(workqueue);

        return ret;
}

static void __exit mmc_exit(void)
{
        sdio_unregister_bus();
        mmc_unregister_host_class();
        mmc_unregister_bus();
        destroy_workqueue(workqueue);
}

subsys_initcall(mmc_init);
module_exit(mmc_exit);

MODULE_LICENSE("GPL");