cros_ec: Add vstore support
[platform/kernel/u-boot.git] / drivers / misc / cros_ec.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Chromium OS cros_ec driver
4  *
5  * Copyright (c) 2012 The Chromium OS Authors.
6  */
7
8 /*
9  * This is the interface to the Chrome OS EC. It provides keyboard functions,
10  * power control and battery management. Quite a few other functions are
11  * provided to enable the EC software to be updated, talk to the EC's I2C bus
12  * and store a small amount of data in a memory which persists while the EC
13  * is not reset.
14  */
15
16 #define LOG_CATEGORY UCLASS_CROS_EC
17
18 #include <common.h>
19 #include <command.h>
20 #include <dm.h>
21 #include <flash.h>
22 #include <i2c.h>
23 #include <cros_ec.h>
24 #include <fdtdec.h>
25 #include <log.h>
26 #include <malloc.h>
27 #include <spi.h>
28 #include <linux/delay.h>
29 #include <linux/errno.h>
30 #include <asm/io.h>
31 #include <asm-generic/gpio.h>
32 #include <dm/device-internal.h>
33 #include <dm/of_extra.h>
34 #include <dm/uclass-internal.h>
35
36 #ifdef DEBUG_TRACE
37 #define debug_trace(fmt, b...)  debug(fmt, #b)
38 #else
39 #define debug_trace(fmt, b...)
40 #endif
41
42 enum {
43         /* Timeout waiting for a flash erase command to complete */
44         CROS_EC_CMD_TIMEOUT_MS  = 5000,
45         /* Timeout waiting for a synchronous hash to be recomputed */
46         CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
47
48         /* Wait 10 ms between attempts to check if EC's hash is ready */
49         CROS_EC_HASH_CHECK_DELAY_MS = 10,
50
51 };
52
53 #define INVALID_HCMD 0xFF
54
55 /*
56  * Map UHEPI masks to non UHEPI commands in order to support old EC FW
57  * which does not support UHEPI command.
58  */
59 static const struct {
60         u8 set_cmd;
61         u8 clear_cmd;
62         u8 get_cmd;
63 } event_map[] = {
64         [EC_HOST_EVENT_MAIN] = {
65                 INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR,
66                 INVALID_HCMD,
67         },
68         [EC_HOST_EVENT_B] = {
69                 INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR_B,
70                 EC_CMD_HOST_EVENT_GET_B,
71         },
72         [EC_HOST_EVENT_SCI_MASK] = {
73                 EC_CMD_HOST_EVENT_SET_SCI_MASK, INVALID_HCMD,
74                 EC_CMD_HOST_EVENT_GET_SCI_MASK,
75         },
76         [EC_HOST_EVENT_SMI_MASK] = {
77                 EC_CMD_HOST_EVENT_SET_SMI_MASK, INVALID_HCMD,
78                 EC_CMD_HOST_EVENT_GET_SMI_MASK,
79         },
80         [EC_HOST_EVENT_ALWAYS_REPORT_MASK] = {
81                 INVALID_HCMD, INVALID_HCMD, INVALID_HCMD,
82         },
83         [EC_HOST_EVENT_ACTIVE_WAKE_MASK] = {
84                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
85                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
86         },
87         [EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX] = {
88                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
89                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
90         },
91         [EC_HOST_EVENT_LAZY_WAKE_MASK_S3] = {
92                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
93                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
94         },
95         [EC_HOST_EVENT_LAZY_WAKE_MASK_S5] = {
96                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
97                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
98         },
99 };
100
101 void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len)
102 {
103 #ifdef DEBUG
104         int i;
105
106         printf("%s: ", name);
107         if (cmd != -1)
108                 printf("cmd=%#x: ", cmd);
109         for (i = 0; i < len; i++)
110                 printf("%02x ", data[i]);
111         printf("\n");
112 #endif
113 }
114
115 /*
116  * Calculate a simple 8-bit checksum of a data block
117  *
118  * @param data  Data block to checksum
119  * @param size  Size of data block in bytes
120  * @return checksum value (0 to 255)
121  */
122 int cros_ec_calc_checksum(const uint8_t *data, int size)
123 {
124         int csum, i;
125
126         for (i = csum = 0; i < size; i++)
127                 csum += data[i];
128         return csum & 0xff;
129 }
130
131 /**
132  * Create a request packet for protocol version 3.
133  *
134  * The packet is stored in the device's internal output buffer.
135  *
136  * @param dev           CROS-EC device
137  * @param cmd           Command to send (EC_CMD_...)
138  * @param cmd_version   Version of command to send (EC_VER_...)
139  * @param dout          Output data (may be NULL If dout_len=0)
140  * @param dout_len      Size of output data in bytes
141  * @return packet size in bytes, or <0 if error.
142  */
143 static int create_proto3_request(struct cros_ec_dev *cdev,
144                                  int cmd, int cmd_version,
145                                  const void *dout, int dout_len)
146 {
147         struct ec_host_request *rq = (struct ec_host_request *)cdev->dout;
148         int out_bytes = dout_len + sizeof(*rq);
149
150         /* Fail if output size is too big */
151         if (out_bytes > (int)sizeof(cdev->dout)) {
152                 debug("%s: Cannot send %d bytes\n", __func__, dout_len);
153                 return -EC_RES_REQUEST_TRUNCATED;
154         }
155
156         /* Fill in request packet */
157         rq->struct_version = EC_HOST_REQUEST_VERSION;
158         rq->checksum = 0;
159         rq->command = cmd;
160         rq->command_version = cmd_version;
161         rq->reserved = 0;
162         rq->data_len = dout_len;
163
164         /* Copy data after header */
165         memcpy(rq + 1, dout, dout_len);
166
167         /* Write checksum field so the entire packet sums to 0 */
168         rq->checksum = (uint8_t)(-cros_ec_calc_checksum(cdev->dout, out_bytes));
169
170         cros_ec_dump_data("out", cmd, cdev->dout, out_bytes);
171
172         /* Return size of request packet */
173         return out_bytes;
174 }
175
176 /**
177  * Prepare the device to receive a protocol version 3 response.
178  *
179  * @param dev           CROS-EC device
180  * @param din_len       Maximum size of response in bytes
181  * @return maximum expected number of bytes in response, or <0 if error.
182  */
183 static int prepare_proto3_response_buffer(struct cros_ec_dev *cdev, int din_len)
184 {
185         int in_bytes = din_len + sizeof(struct ec_host_response);
186
187         /* Fail if input size is too big */
188         if (in_bytes > (int)sizeof(cdev->din)) {
189                 debug("%s: Cannot receive %d bytes\n", __func__, din_len);
190                 return -EC_RES_RESPONSE_TOO_BIG;
191         }
192
193         /* Return expected size of response packet */
194         return in_bytes;
195 }
196
197 /**
198  * Handle a protocol version 3 response packet.
199  *
200  * The packet must already be stored in the device's internal input buffer.
201  *
202  * @param dev           CROS-EC device
203  * @param dinp          Returns pointer to response data
204  * @param din_len       Maximum size of response in bytes
205  * @return number of bytes of response data, or <0 if error. Note that error
206  * codes can be from errno.h or -ve EC_RES_INVALID_CHECKSUM values (and they
207  * overlap!)
208  */
209 static int handle_proto3_response(struct cros_ec_dev *dev,
210                                   uint8_t **dinp, int din_len)
211 {
212         struct ec_host_response *rs = (struct ec_host_response *)dev->din;
213         int in_bytes;
214         int csum;
215
216         cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs));
217
218         /* Check input data */
219         if (rs->struct_version != EC_HOST_RESPONSE_VERSION) {
220                 debug("%s: EC response version mismatch\n", __func__);
221                 return -EC_RES_INVALID_RESPONSE;
222         }
223
224         if (rs->reserved) {
225                 debug("%s: EC response reserved != 0\n", __func__);
226                 return -EC_RES_INVALID_RESPONSE;
227         }
228
229         if (rs->data_len > din_len) {
230                 debug("%s: EC returned too much data\n", __func__);
231                 return -EC_RES_RESPONSE_TOO_BIG;
232         }
233
234         cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len);
235
236         /* Update in_bytes to actual data size */
237         in_bytes = sizeof(*rs) + rs->data_len;
238
239         /* Verify checksum */
240         csum = cros_ec_calc_checksum(dev->din, in_bytes);
241         if (csum) {
242                 debug("%s: EC response checksum invalid: 0x%02x\n", __func__,
243                       csum);
244                 return -EC_RES_INVALID_CHECKSUM;
245         }
246
247         /* Return error result, if any */
248         if (rs->result)
249                 return -(int)rs->result;
250
251         /* If we're still here, set response data pointer and return length */
252         *dinp = (uint8_t *)(rs + 1);
253
254         return rs->data_len;
255 }
256
257 static int send_command_proto3(struct cros_ec_dev *cdev,
258                                int cmd, int cmd_version,
259                                const void *dout, int dout_len,
260                                uint8_t **dinp, int din_len)
261 {
262         struct dm_cros_ec_ops *ops;
263         int out_bytes, in_bytes;
264         int rv;
265
266         /* Create request packet */
267         out_bytes = create_proto3_request(cdev, cmd, cmd_version,
268                                           dout, dout_len);
269         if (out_bytes < 0)
270                 return out_bytes;
271
272         /* Prepare response buffer */
273         in_bytes = prepare_proto3_response_buffer(cdev, din_len);
274         if (in_bytes < 0)
275                 return in_bytes;
276
277         ops = dm_cros_ec_get_ops(cdev->dev);
278         rv = ops->packet ? ops->packet(cdev->dev, out_bytes, in_bytes) :
279                         -ENOSYS;
280         if (rv < 0)
281                 return rv;
282
283         /* Process the response */
284         return handle_proto3_response(cdev, dinp, din_len);
285 }
286
287 static int send_command(struct cros_ec_dev *dev, uint cmd, int cmd_version,
288                         const void *dout, int dout_len,
289                         uint8_t **dinp, int din_len)
290 {
291         struct dm_cros_ec_ops *ops;
292         int ret = -1;
293
294         /* Handle protocol version 3 support */
295         if (dev->protocol_version == 3) {
296                 return send_command_proto3(dev, cmd, cmd_version,
297                                            dout, dout_len, dinp, din_len);
298         }
299
300         ops = dm_cros_ec_get_ops(dev->dev);
301         ret = ops->command(dev->dev, cmd, cmd_version,
302                            (const uint8_t *)dout, dout_len, dinp, din_len);
303
304         return ret;
305 }
306
307 /**
308  * Send a command to the CROS-EC device and return the reply.
309  *
310  * The device's internal input/output buffers are used.
311  *
312  * @param dev           CROS-EC device
313  * @param cmd           Command to send (EC_CMD_...)
314  * @param cmd_version   Version of command to send (EC_VER_...)
315  * @param dout          Output data (may be NULL If dout_len=0)
316  * @param dout_len      Size of output data in bytes
317  * @param dinp          Response data (may be NULL If din_len=0).
318  *                      If not NULL, it will be updated to point to the data
319  *                      and will always be double word aligned (64-bits)
320  * @param din_len       Maximum size of response in bytes
321  * @return number of bytes in response, or -ve on error
322  */
323 static int ec_command_inptr(struct udevice *dev, uint cmd,
324                             int cmd_version, const void *dout, int dout_len,
325                             uint8_t **dinp, int din_len)
326 {
327         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
328         uint8_t *din = NULL;
329         int len;
330
331         len = send_command(cdev, cmd, cmd_version, dout, dout_len, &din,
332                            din_len);
333
334         /* If the command doesn't complete, wait a while */
335         if (len == -EC_RES_IN_PROGRESS) {
336                 struct ec_response_get_comms_status *resp = NULL;
337                 ulong start;
338
339                 /* Wait for command to complete */
340                 start = get_timer(0);
341                 do {
342                         int ret;
343
344                         mdelay(50);     /* Insert some reasonable delay */
345                         ret = send_command(cdev, EC_CMD_GET_COMMS_STATUS, 0,
346                                            NULL, 0,
347                                            (uint8_t **)&resp, sizeof(*resp));
348                         if (ret < 0)
349                                 return ret;
350
351                         if (get_timer(start) > CROS_EC_CMD_TIMEOUT_MS) {
352                                 debug("%s: Command %#02x timeout\n",
353                                       __func__, cmd);
354                                 return -EC_RES_TIMEOUT;
355                         }
356                 } while (resp->flags & EC_COMMS_STATUS_PROCESSING);
357
358                 /* OK it completed, so read the status response */
359                 /* not sure why it was 0 for the last argument */
360                 len = send_command(cdev, EC_CMD_RESEND_RESPONSE, 0, NULL, 0,
361                                    &din, din_len);
362         }
363
364         debug("%s: len=%d, din=%p\n", __func__, len, din);
365         if (dinp) {
366                 /* If we have any data to return, it must be 64bit-aligned */
367                 assert(len <= 0 || !((uintptr_t)din & 7));
368                 *dinp = din;
369         }
370
371         return len;
372 }
373
374 /**
375  * Send a command to the CROS-EC device and return the reply.
376  *
377  * The device's internal input/output buffers are used.
378  *
379  * @param dev           CROS-EC device
380  * @param cmd           Command to send (EC_CMD_...)
381  * @param cmd_version   Version of command to send (EC_VER_...)
382  * @param dout          Output data (may be NULL If dout_len=0)
383  * @param dout_len      Size of output data in bytes
384  * @param din           Response data (may be NULL If din_len=0).
385  *                      It not NULL, it is a place for ec_command() to copy the
386  *      data to.
387  * @param din_len       Maximum size of response in bytes
388  * @return number of bytes in response, or -ve on error
389  */
390 static int ec_command(struct udevice *dev, uint cmd, int cmd_version,
391                       const void *dout, int dout_len,
392                       void *din, int din_len)
393 {
394         uint8_t *in_buffer;
395         int len;
396
397         assert((din_len == 0) || din);
398         len = ec_command_inptr(dev, cmd, cmd_version, dout, dout_len,
399                                &in_buffer, din_len);
400         if (len > 0) {
401                 /*
402                  * If we were asked to put it somewhere, do so, otherwise just
403                  * disregard the result.
404                  */
405                 if (din && in_buffer) {
406                         assert(len <= din_len);
407                         if (len > din_len)
408                                 return -ENOSPC;
409                         memmove(din, in_buffer, len);
410                 }
411         }
412         return len;
413 }
414
415 int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan)
416 {
417         if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
418                        sizeof(scan->data)) != sizeof(scan->data))
419                 return -1;
420
421         return 0;
422 }
423
424 int cros_ec_get_next_event(struct udevice *dev,
425                            struct ec_response_get_next_event *event)
426 {
427         int ret;
428
429         ret = ec_command(dev, EC_CMD_GET_NEXT_EVENT, 0, NULL, 0,
430                          event, sizeof(*event));
431         if (ret < 0)
432                 return ret;
433         else if (ret != sizeof(*event))
434                 return -EC_RES_INVALID_RESPONSE;
435
436         return 0;
437 }
438
439 int cros_ec_read_id(struct udevice *dev, char *id, int maxlen)
440 {
441         struct ec_response_get_version *r;
442         int ret;
443
444         ret = ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
445                                (uint8_t **)&r, sizeof(*r));
446         if (ret != sizeof(*r)) {
447                 log_err("Got rc %d, expected %u\n", ret, (uint)sizeof(*r));
448                 return -1;
449         }
450
451         if (maxlen > (int)sizeof(r->version_string_ro))
452                 maxlen = sizeof(r->version_string_ro);
453
454         switch (r->current_image) {
455         case EC_IMAGE_RO:
456                 memcpy(id, r->version_string_ro, maxlen);
457                 break;
458         case EC_IMAGE_RW:
459                 memcpy(id, r->version_string_rw, maxlen);
460                 break;
461         default:
462                 log_err("Invalid EC image %d\n", r->current_image);
463                 return -1;
464         }
465
466         id[maxlen - 1] = '\0';
467         return 0;
468 }
469
470 int cros_ec_read_version(struct udevice *dev,
471                          struct ec_response_get_version **versionp)
472 {
473         if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
474                         (uint8_t **)versionp, sizeof(**versionp))
475                         != sizeof(**versionp))
476                 return -1;
477
478         return 0;
479 }
480
481 int cros_ec_read_build_info(struct udevice *dev, char **strp)
482 {
483         if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
484                         (uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0)
485                 return -1;
486
487         return 0;
488 }
489
490 int cros_ec_read_current_image(struct udevice *dev,
491                                enum ec_current_image *image)
492 {
493         struct ec_response_get_version *r;
494
495         if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
496                         (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
497                 return -1;
498
499         *image = r->current_image;
500         return 0;
501 }
502
503 static int cros_ec_wait_on_hash_done(struct udevice *dev,
504                                      struct ec_params_vboot_hash *p,
505                                      struct ec_response_vboot_hash *hash)
506 {
507         ulong start;
508
509         start = get_timer(0);
510         while (hash->status == EC_VBOOT_HASH_STATUS_BUSY) {
511                 mdelay(CROS_EC_HASH_CHECK_DELAY_MS);
512
513                 p->cmd = EC_VBOOT_HASH_GET;
514
515                 if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, p, sizeof(*p), hash,
516                                sizeof(*hash)) < 0)
517                         return -1;
518
519                 if (get_timer(start) > CROS_EC_CMD_HASH_TIMEOUT_MS) {
520                         debug("%s: EC_VBOOT_HASH_GET timeout\n", __func__);
521                         return -EC_RES_TIMEOUT;
522                 }
523         }
524         return 0;
525 }
526
527 int cros_ec_read_hash(struct udevice *dev, uint hash_offset,
528                       struct ec_response_vboot_hash *hash)
529 {
530         struct ec_params_vboot_hash p;
531         int rv;
532
533         p.cmd = EC_VBOOT_HASH_GET;
534         p.offset = hash_offset;
535         if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
536                        hash, sizeof(*hash)) < 0)
537                 return -1;
538
539         /* If the EC is busy calculating the hash, fidget until it's done. */
540         rv = cros_ec_wait_on_hash_done(dev, &p, hash);
541         if (rv)
542                 return rv;
543
544         /* If the hash is valid, we're done. Otherwise, we have to kick it off
545          * again and wait for it to complete. Note that we explicitly assume
546          * that hashing zero bytes is always wrong, even though that would
547          * produce a valid hash value. */
548         if (hash->status == EC_VBOOT_HASH_STATUS_DONE && hash->size)
549                 return 0;
550
551         debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
552               __func__, hash->status, hash->size);
553
554         p.cmd = EC_VBOOT_HASH_START;
555         p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
556         p.nonce_size = 0;
557         p.offset = hash_offset;
558
559         if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
560                        hash, sizeof(*hash)) < 0)
561                 return -1;
562
563         rv = cros_ec_wait_on_hash_done(dev, &p, hash);
564         if (rv)
565                 return rv;
566         if (hash->status != EC_VBOOT_HASH_STATUS_DONE) {
567                 log_err("Hash did not complete, status=%d\n", hash->status);
568                 return -EIO;
569         }
570
571         debug("%s: hash done\n", __func__);
572
573         return 0;
574 }
575
576 static int cros_ec_invalidate_hash(struct udevice *dev)
577 {
578         struct ec_params_vboot_hash p;
579         struct ec_response_vboot_hash *hash;
580
581         /* We don't have an explict command for the EC to discard its current
582          * hash value, so we'll just tell it to calculate one that we know is
583          * wrong (we claim that hashing zero bytes is always invalid).
584          */
585         p.cmd = EC_VBOOT_HASH_RECALC;
586         p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
587         p.nonce_size = 0;
588         p.offset = 0;
589         p.size = 0;
590
591         debug("%s:\n", __func__);
592
593         if (ec_command_inptr(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
594                        (uint8_t **)&hash, sizeof(*hash)) < 0)
595                 return -1;
596
597         /* No need to wait for it to finish */
598         return 0;
599 }
600
601 int cros_ec_hello(struct udevice *dev, uint *handshakep)
602 {
603         struct ec_params_hello req;
604         struct ec_response_hello *resp;
605
606         req.in_data = 0x12345678;
607         if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
608                              (uint8_t **)&resp, sizeof(*resp)) < 0)
609                 return -EIO;
610         if (resp->out_data != req.in_data + 0x01020304) {
611                 printf("Received invalid handshake %x\n", resp->out_data);
612                 if (handshakep)
613                         *handshakep = req.in_data;
614                 return -ENOTSYNC;
615         }
616
617         return 0;
618 }
619
620 int cros_ec_reboot(struct udevice *dev, enum ec_reboot_cmd cmd, uint8_t flags)
621 {
622         struct ec_params_reboot_ec p;
623
624         p.cmd = cmd;
625         p.flags = flags;
626
627         if (ec_command_inptr(dev, EC_CMD_REBOOT_EC, 0, &p, sizeof(p), NULL, 0)
628                         < 0)
629                 return -1;
630
631         if (!(flags & EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
632                 ulong start;
633
634                 /*
635                  * EC reboot will take place immediately so delay to allow it
636                  * to complete.  Note that some reboot types (EC_REBOOT_COLD)
637                  * will reboot the AP as well, in which case we won't actually
638                  * get to this point.
639                  */
640                 mdelay(50);
641                 start = get_timer(0);
642                 while (cros_ec_hello(dev, NULL)) {
643                         if (get_timer(start) > 3000) {
644                                 log_err("EC did not return from reboot\n");
645                                 return -ETIMEDOUT;
646                         }
647                         mdelay(5);
648                 }
649         }
650
651         return 0;
652 }
653
654 int cros_ec_interrupt_pending(struct udevice *dev)
655 {
656         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
657
658         /* no interrupt support : always poll */
659         if (!dm_gpio_is_valid(&cdev->ec_int))
660                 return -ENOENT;
661
662         return dm_gpio_get_value(&cdev->ec_int);
663 }
664
665 int cros_ec_info(struct udevice *dev, struct ec_response_mkbp_info *info)
666 {
667         if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info,
668                        sizeof(*info)) != sizeof(*info))
669                 return -1;
670
671         return 0;
672 }
673
674 int cros_ec_get_event_mask(struct udevice *dev, uint type, uint32_t *mask)
675 {
676         struct ec_response_host_event_mask rsp;
677         int ret;
678
679         ret = ec_command(dev, type, 0, NULL, 0, &rsp, sizeof(rsp));
680         if (ret < 0)
681                 return ret;
682         else if (ret != sizeof(rsp))
683                 return -EINVAL;
684
685         *mask = rsp.mask;
686
687         return 0;
688 }
689
690 int cros_ec_set_event_mask(struct udevice *dev, uint type, uint32_t mask)
691 {
692         struct ec_params_host_event_mask req;
693         int ret;
694
695         req.mask = mask;
696
697         ret = ec_command(dev, type, 0, &req, sizeof(req), NULL, 0);
698         if (ret < 0)
699                 return ret;
700
701         return 0;
702 }
703
704 int cros_ec_get_host_events(struct udevice *dev, uint32_t *events_ptr)
705 {
706         struct ec_response_host_event_mask *resp;
707
708         /*
709          * Use the B copy of the event flags, because the main copy is already
710          * used by ACPI/SMI.
711          */
712         if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
713                        (uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp))
714                 return -1;
715
716         if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
717                 return -1;
718
719         *events_ptr = resp->mask;
720         return 0;
721 }
722
723 int cros_ec_clear_host_events(struct udevice *dev, uint32_t events)
724 {
725         struct ec_params_host_event_mask params;
726
727         params.mask = events;
728
729         /*
730          * Use the B copy of the event flags, so it affects the data returned
731          * by cros_ec_get_host_events().
732          */
733         if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_CLEAR_B, 0,
734                        &params, sizeof(params), NULL, 0) < 0)
735                 return -1;
736
737         return 0;
738 }
739
740 int cros_ec_flash_protect(struct udevice *dev, uint32_t set_mask,
741                           uint32_t set_flags,
742                           struct ec_response_flash_protect *resp)
743 {
744         struct ec_params_flash_protect params;
745
746         params.mask = set_mask;
747         params.flags = set_flags;
748
749         if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
750                        &params, sizeof(params),
751                        resp, sizeof(*resp)) != sizeof(*resp))
752                 return -1;
753
754         return 0;
755 }
756
757 int cros_ec_entering_mode(struct udevice *dev, int mode)
758 {
759         int rc;
760
761         rc = ec_command(dev, EC_CMD_ENTERING_MODE, 0, &mode, sizeof(mode),
762                         NULL, 0);
763         if (rc)
764                 return -1;
765         return 0;
766 }
767
768 static int cros_ec_check_version(struct udevice *dev)
769 {
770         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
771         struct ec_params_hello req;
772
773         struct dm_cros_ec_ops *ops;
774         int ret;
775
776         ops = dm_cros_ec_get_ops(dev);
777         if (ops->check_version) {
778                 ret = ops->check_version(dev);
779                 if (ret)
780                         return ret;
781         }
782
783         /*
784          * TODO(sjg@chromium.org).
785          * There is a strange oddity here with the EC. We could just ignore
786          * the response, i.e. pass the last two parameters as NULL and 0.
787          * In this case we won't read back very many bytes from the EC.
788          * On the I2C bus the EC gets upset about this and will try to send
789          * the bytes anyway. This means that we will have to wait for that
790          * to complete before continuing with a new EC command.
791          *
792          * This problem is probably unique to the I2C bus.
793          *
794          * So for now, just read all the data anyway.
795          */
796
797         /* Try sending a version 3 packet */
798         cdev->protocol_version = 3;
799         req.in_data = 0;
800         ret = cros_ec_hello(dev, NULL);
801         if (!ret || ret == -ENOTSYNC)
802                 return 0;
803
804         /* Try sending a version 2 packet */
805         cdev->protocol_version = 2;
806         ret = cros_ec_hello(dev, NULL);
807         if (!ret || ret == -ENOTSYNC)
808                 return 0;
809
810         /*
811          * Fail if we're still here, since the EC doesn't understand any
812          * protcol version we speak.  Version 1 interface without command
813          * version is no longer supported, and we don't know about any new
814          * protocol versions.
815          */
816         cdev->protocol_version = 0;
817         printf("%s: ERROR: old EC interface not supported\n", __func__);
818         return -1;
819 }
820
821 int cros_ec_test(struct udevice *dev)
822 {
823         uint out_data;
824         int ret;
825
826         ret = cros_ec_hello(dev, &out_data);
827         if (ret == -ENOTSYNC) {
828                 printf("Received invalid handshake %x\n", out_data);
829                 return ret;
830         } else if (ret) {
831                 printf("ec_command_inptr() returned error\n");
832                 return ret;
833         }
834
835         return 0;
836 }
837
838 int cros_ec_flash_offset(struct udevice *dev, enum ec_flash_region region,
839                       uint32_t *offset, uint32_t *size)
840 {
841         struct ec_params_flash_region_info p;
842         struct ec_response_flash_region_info *r;
843         int ret;
844
845         p.region = region;
846         ret = ec_command_inptr(dev, EC_CMD_FLASH_REGION_INFO,
847                          EC_VER_FLASH_REGION_INFO,
848                          &p, sizeof(p), (uint8_t **)&r, sizeof(*r));
849         if (ret != sizeof(*r))
850                 return -1;
851
852         if (offset)
853                 *offset = r->offset;
854         if (size)
855                 *size = r->size;
856
857         return 0;
858 }
859
860 int cros_ec_flash_erase(struct udevice *dev, uint32_t offset, uint32_t size)
861 {
862         struct ec_params_flash_erase p;
863
864         p.offset = offset;
865         p.size = size;
866         return ec_command_inptr(dev, EC_CMD_FLASH_ERASE, 0, &p, sizeof(p),
867                         NULL, 0);
868 }
869
870 /**
871  * Write a single block to the flash
872  *
873  * Write a block of data to the EC flash. The size must not exceed the flash
874  * write block size which you can obtain from cros_ec_flash_write_burst_size().
875  *
876  * The offset starts at 0. You can obtain the region information from
877  * cros_ec_flash_offset() to find out where to write for a particular region.
878  *
879  * Attempting to write to the region where the EC is currently running from
880  * will result in an error.
881  *
882  * @param dev           CROS-EC device
883  * @param data          Pointer to data buffer to write
884  * @param offset        Offset within flash to write to.
885  * @param size          Number of bytes to write
886  * @return 0 if ok, -1 on error
887  */
888 static int cros_ec_flash_write_block(struct udevice *dev, const uint8_t *data,
889                                      uint32_t offset, uint32_t size)
890 {
891         struct ec_params_flash_write *p;
892         int ret;
893
894         p = malloc(sizeof(*p) + size);
895         if (!p)
896                 return -ENOMEM;
897
898         p->offset = offset;
899         p->size = size;
900         assert(data && p->size <= EC_FLASH_WRITE_VER0_SIZE);
901         memcpy(p + 1, data, p->size);
902
903         ret = ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
904                           p, sizeof(*p) + size, NULL, 0) >= 0 ? 0 : -1;
905
906         free(p);
907
908         return ret;
909 }
910
911 /**
912  * Return optimal flash write burst size
913  */
914 static int cros_ec_flash_write_burst_size(struct udevice *dev)
915 {
916         return EC_FLASH_WRITE_VER0_SIZE;
917 }
918
919 /**
920  * Check if a block of data is erased (all 0xff)
921  *
922  * This function is useful when dealing with flash, for checking whether a
923  * data block is erased and thus does not need to be programmed.
924  *
925  * @param data          Pointer to data to check (must be word-aligned)
926  * @param size          Number of bytes to check (must be word-aligned)
927  * @return 0 if erased, non-zero if any word is not erased
928  */
929 static int cros_ec_data_is_erased(const uint32_t *data, int size)
930 {
931         assert(!(size & 3));
932         size /= sizeof(uint32_t);
933         for (; size > 0; size -= 4, data++)
934                 if (*data != -1U)
935                         return 0;
936
937         return 1;
938 }
939
940 /**
941  * Read back flash parameters
942  *
943  * This function reads back parameters of the flash as reported by the EC
944  *
945  * @param dev  Pointer to device
946  * @param info Pointer to output flash info struct
947  */
948 int cros_ec_read_flashinfo(struct udevice *dev,
949                            struct ec_response_flash_info *info)
950 {
951         int ret;
952
953         ret = ec_command(dev, EC_CMD_FLASH_INFO, 0,
954                          NULL, 0, info, sizeof(*info));
955         if (ret < 0)
956                 return ret;
957
958         return ret < sizeof(*info) ? -1 : 0;
959 }
960
961 int cros_ec_flash_write(struct udevice *dev, const uint8_t *data,
962                         uint32_t offset, uint32_t size)
963 {
964         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
965         uint32_t burst = cros_ec_flash_write_burst_size(dev);
966         uint32_t end, off;
967         int ret;
968
969         if (!burst)
970                 return -EINVAL;
971
972         /*
973          * TODO: round up to the nearest multiple of write size.  Can get away
974          * without that on link right now because its write size is 4 bytes.
975          */
976         end = offset + size;
977         for (off = offset; off < end; off += burst, data += burst) {
978                 uint32_t todo;
979
980                 /* If the data is empty, there is no point in programming it */
981                 todo = min(end - off, burst);
982                 if (cdev->optimise_flash_write &&
983                     cros_ec_data_is_erased((uint32_t *)data, todo))
984                         continue;
985
986                 ret = cros_ec_flash_write_block(dev, data, off, todo);
987                 if (ret)
988                         return ret;
989         }
990
991         return 0;
992 }
993
994 /**
995  * Run verification on a slot
996  *
997  * @param me     CrosEc instance
998  * @param region Region to run verification on
999  * @return 0 if success or not applicable. Non-zero if verification failed.
1000  */
1001 int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region)
1002 {
1003         struct ec_params_efs_verify p;
1004         int rv;
1005
1006         log_info("EFS: EC is verifying updated image...\n");
1007         p.region = region;
1008
1009         rv = ec_command(dev, EC_CMD_EFS_VERIFY, 0, &p, sizeof(p), NULL, 0);
1010         if (rv >= 0) {
1011                 log_info("EFS: Verification success\n");
1012                 return 0;
1013         }
1014         if (rv == -EC_RES_INVALID_COMMAND) {
1015                 log_info("EFS: EC doesn't support EFS_VERIFY command\n");
1016                 return 0;
1017         }
1018         log_info("EFS: Verification failed\n");
1019
1020         return rv;
1021 }
1022
1023 /**
1024  * Read a single block from the flash
1025  *
1026  * Read a block of data from the EC flash. The size must not exceed the flash
1027  * write block size which you can obtain from cros_ec_flash_write_burst_size().
1028  *
1029  * The offset starts at 0. You can obtain the region information from
1030  * cros_ec_flash_offset() to find out where to read for a particular region.
1031  *
1032  * @param dev           CROS-EC device
1033  * @param data          Pointer to data buffer to read into
1034  * @param offset        Offset within flash to read from
1035  * @param size          Number of bytes to read
1036  * @return 0 if ok, -1 on error
1037  */
1038 static int cros_ec_flash_read_block(struct udevice *dev, uint8_t *data,
1039                                     uint32_t offset, uint32_t size)
1040 {
1041         struct ec_params_flash_read p;
1042
1043         p.offset = offset;
1044         p.size = size;
1045
1046         return ec_command(dev, EC_CMD_FLASH_READ, 0,
1047                           &p, sizeof(p), data, size) >= 0 ? 0 : -1;
1048 }
1049
1050 int cros_ec_flash_read(struct udevice *dev, uint8_t *data, uint32_t offset,
1051                        uint32_t size)
1052 {
1053         uint32_t burst = cros_ec_flash_write_burst_size(dev);
1054         uint32_t end, off;
1055         int ret;
1056
1057         end = offset + size;
1058         for (off = offset; off < end; off += burst, data += burst) {
1059                 ret = cros_ec_flash_read_block(dev, data, off,
1060                                             min(end - off, burst));
1061                 if (ret)
1062                         return ret;
1063         }
1064
1065         return 0;
1066 }
1067
1068 int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image,
1069                             int image_size)
1070 {
1071         uint32_t rw_offset, rw_size;
1072         int ret;
1073
1074         if (cros_ec_flash_offset(dev, EC_FLASH_REGION_ACTIVE, &rw_offset,
1075                 &rw_size))
1076                 return -1;
1077         if (image_size > (int)rw_size)
1078                 return -1;
1079
1080         /* Invalidate the existing hash, just in case the AP reboots
1081          * unexpectedly during the update. If that happened, the EC RW firmware
1082          * would be invalid, but the EC would still have the original hash.
1083          */
1084         ret = cros_ec_invalidate_hash(dev);
1085         if (ret)
1086                 return ret;
1087
1088         /*
1089          * Erase the entire RW section, so that the EC doesn't see any garbage
1090          * past the new image if it's smaller than the current image.
1091          *
1092          * TODO: could optimize this to erase just the current image, since
1093          * presumably everything past that is 0xff's.  But would still need to
1094          * round up to the nearest multiple of erase size.
1095          */
1096         ret = cros_ec_flash_erase(dev, rw_offset, rw_size);
1097         if (ret)
1098                 return ret;
1099
1100         /* Write the image */
1101         ret = cros_ec_flash_write(dev, image, rw_offset, image_size);
1102         if (ret)
1103                 return ret;
1104
1105         return 0;
1106 }
1107
1108 int cros_ec_get_sku_id(struct udevice *dev)
1109 {
1110         struct ec_sku_id_info *r;
1111         int ret;
1112
1113         ret = ec_command_inptr(dev, EC_CMD_GET_SKU_ID, 0, NULL, 0,
1114                                (uint8_t **)&r, sizeof(*r));
1115         if (ret != sizeof(*r))
1116                 return -ret;
1117
1118         return r->sku_id;
1119 }
1120
1121 int cros_ec_read_nvdata(struct udevice *dev, uint8_t *block, int size)
1122 {
1123         struct ec_params_vbnvcontext p;
1124         int len;
1125
1126         if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
1127                 return -EINVAL;
1128
1129         p.op = EC_VBNV_CONTEXT_OP_READ;
1130
1131         len = ec_command(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
1132                          &p, sizeof(uint32_t) + size, block, size);
1133         if (len != size) {
1134                 log_err("Expected %d bytes, got %d\n", size, len);
1135                 return -EIO;
1136         }
1137
1138         return 0;
1139 }
1140
1141 int cros_ec_write_nvdata(struct udevice *dev, const uint8_t *block, int size)
1142 {
1143         struct ec_params_vbnvcontext p;
1144         int len;
1145
1146         if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
1147                 return -EINVAL;
1148         p.op = EC_VBNV_CONTEXT_OP_WRITE;
1149         memcpy(p.block, block, size);
1150
1151         len = ec_command_inptr(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
1152                         &p, sizeof(uint32_t) + size, NULL, 0);
1153         if (len < 0)
1154                 return -1;
1155
1156         return 0;
1157 }
1158
1159 int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags)
1160 {
1161         struct ec_params_battery_cutoff p;
1162         int len;
1163
1164         p.flags = flags;
1165         len = ec_command(dev, EC_CMD_BATTERY_CUT_OFF, 1, &p, sizeof(p),
1166                          NULL, 0);
1167
1168         if (len < 0)
1169                 return -1;
1170         return 0;
1171 }
1172
1173 int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
1174 {
1175         struct ec_params_ldo_set params;
1176
1177         params.index = index;
1178         params.state = state;
1179
1180         if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0, &params, sizeof(params),
1181                              NULL, 0))
1182                 return -1;
1183
1184         return 0;
1185 }
1186
1187 int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
1188 {
1189         struct ec_params_ldo_get params;
1190         struct ec_response_ldo_get *resp;
1191
1192         params.index = index;
1193
1194         if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0, &params, sizeof(params),
1195                              (uint8_t **)&resp, sizeof(*resp)) !=
1196                              sizeof(*resp))
1197                 return -1;
1198
1199         *state = resp->state;
1200
1201         return 0;
1202 }
1203
1204 int cros_ec_register(struct udevice *dev)
1205 {
1206         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
1207         char id[MSG_BYTES];
1208
1209         cdev->dev = dev;
1210         gpio_request_by_name(dev, "ec-interrupt", 0, &cdev->ec_int,
1211                              GPIOD_IS_IN);
1212         cdev->optimise_flash_write = dev_read_bool(dev, "optimise-flash-write");
1213
1214         if (cros_ec_check_version(dev)) {
1215                 debug("%s: Could not detect CROS-EC version\n", __func__);
1216                 return -CROS_EC_ERR_CHECK_VERSION;
1217         }
1218
1219         if (cros_ec_read_id(dev, id, sizeof(id))) {
1220                 debug("%s: Could not read KBC ID\n", __func__);
1221                 return -CROS_EC_ERR_READ_ID;
1222         }
1223
1224         /* Remember this device for use by the cros_ec command */
1225         debug("Google Chrome EC v%d CROS-EC driver ready, id '%s'\n",
1226               cdev->protocol_version, id);
1227
1228         return 0;
1229 }
1230
1231 int cros_ec_decode_ec_flash(struct udevice *dev, struct fdt_cros_ec *config)
1232 {
1233         ofnode flash_node, node;
1234
1235         flash_node = dev_read_subnode(dev, "flash");
1236         if (!ofnode_valid(flash_node)) {
1237                 debug("Failed to find flash node\n");
1238                 return -1;
1239         }
1240
1241         if (ofnode_read_fmap_entry(flash_node,  &config->flash)) {
1242                 debug("Failed to decode flash node in chrome-ec\n");
1243                 return -1;
1244         }
1245
1246         config->flash_erase_value = ofnode_read_s32_default(flash_node,
1247                                                             "erase-value", -1);
1248         ofnode_for_each_subnode(node, flash_node) {
1249                 const char *name = ofnode_get_name(node);
1250                 enum ec_flash_region region;
1251
1252                 if (0 == strcmp(name, "ro")) {
1253                         region = EC_FLASH_REGION_RO;
1254                 } else if (0 == strcmp(name, "rw")) {
1255                         region = EC_FLASH_REGION_ACTIVE;
1256                 } else if (0 == strcmp(name, "wp-ro")) {
1257                         region = EC_FLASH_REGION_WP_RO;
1258                 } else {
1259                         debug("Unknown EC flash region name '%s'\n", name);
1260                         return -1;
1261                 }
1262
1263                 if (ofnode_read_fmap_entry(node, &config->region[region])) {
1264                         debug("Failed to decode flash region in chrome-ec'\n");
1265                         return -1;
1266                 }
1267         }
1268
1269         return 0;
1270 }
1271
1272 int cros_ec_i2c_tunnel(struct udevice *dev, int port, struct i2c_msg *in,
1273                        int nmsgs)
1274 {
1275         union {
1276                 struct ec_params_i2c_passthru p;
1277                 uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
1278         } params;
1279         union {
1280                 struct ec_response_i2c_passthru r;
1281                 uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
1282         } response;
1283         struct ec_params_i2c_passthru *p = &params.p;
1284         struct ec_response_i2c_passthru *r = &response.r;
1285         struct ec_params_i2c_passthru_msg *msg;
1286         uint8_t *pdata, *read_ptr = NULL;
1287         int read_len;
1288         int size;
1289         int rv;
1290         int i;
1291
1292         p->port = port;
1293
1294         p->num_msgs = nmsgs;
1295         size = sizeof(*p) + p->num_msgs * sizeof(*msg);
1296
1297         /* Create a message to write the register address and optional data */
1298         pdata = (uint8_t *)p + size;
1299
1300         read_len = 0;
1301         for (i = 0, msg = p->msg; i < nmsgs; i++, msg++, in++) {
1302                 bool is_read = in->flags & I2C_M_RD;
1303
1304                 msg->addr_flags = in->addr;
1305                 msg->len = in->len;
1306                 if (is_read) {
1307                         msg->addr_flags |= EC_I2C_FLAG_READ;
1308                         read_len += in->len;
1309                         read_ptr = in->buf;
1310                         if (sizeof(*r) + read_len > sizeof(response)) {
1311                                 puts("Read length too big for buffer\n");
1312                                 return -1;
1313                         }
1314                 } else {
1315                         if (pdata - (uint8_t *)p + in->len > sizeof(params)) {
1316                                 puts("Params too large for buffer\n");
1317                                 return -1;
1318                         }
1319                         memcpy(pdata, in->buf, in->len);
1320                         pdata += in->len;
1321                 }
1322         }
1323
1324         rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, pdata - (uint8_t *)p,
1325                         r, sizeof(*r) + read_len);
1326         if (rv < 0)
1327                 return rv;
1328
1329         /* Parse response */
1330         if (r->i2c_status & EC_I2C_STATUS_ERROR) {
1331                 printf("Transfer failed with status=0x%x\n", r->i2c_status);
1332                 return -1;
1333         }
1334
1335         if (rv < sizeof(*r) + read_len) {
1336                 puts("Truncated read response\n");
1337                 return -1;
1338         }
1339
1340         /* We only support a single read message for each transfer */
1341         if (read_len)
1342                 memcpy(read_ptr, r->data, read_len);
1343
1344         return 0;
1345 }
1346
1347 int cros_ec_get_features(struct udevice *dev, u64 *featuresp)
1348 {
1349         struct ec_response_get_features r;
1350         int rv;
1351
1352         rv = ec_command(dev, EC_CMD_GET_FEATURES, 0, NULL, 0, &r, sizeof(r));
1353         if (rv != sizeof(r))
1354                 return -EIO;
1355         *featuresp = r.flags[0] | (u64)r.flags[1] << 32;
1356
1357         return 0;
1358 }
1359
1360 int cros_ec_check_feature(struct udevice *dev, uint feature)
1361 {
1362         struct ec_response_get_features r;
1363         int rv;
1364
1365         rv = ec_command(dev, EC_CMD_GET_FEATURES, 0, NULL, 0, &r, sizeof(r));
1366         if (rv != sizeof(r))
1367                 return -EIO;
1368
1369         if (feature >= 8 * sizeof(r.flags))
1370                 return -EINVAL;
1371
1372         return r.flags[feature / 32] & EC_FEATURE_MASK_0(feature) ? true :
1373                  false;
1374 }
1375
1376 /*
1377  * Query the EC for specified mask indicating enabled events.
1378  * The EC maintains separate event masks for SMI, SCI and WAKE.
1379  */
1380 static int cros_ec_uhepi_cmd(struct udevice *dev, uint mask, uint action,
1381                              uint64_t *value)
1382 {
1383         int ret;
1384         struct ec_params_host_event req;
1385         struct ec_response_host_event rsp;
1386
1387         req.action = action;
1388         req.mask_type = mask;
1389         if (action != EC_HOST_EVENT_GET)
1390                 req.value = *value;
1391         else
1392                 *value = 0;
1393         ret = ec_command(dev, EC_CMD_HOST_EVENT, 0, &req, sizeof(req), &rsp,
1394                          sizeof(rsp));
1395
1396         if (action != EC_HOST_EVENT_GET)
1397                 return ret;
1398         if (ret == 0)
1399                 *value = rsp.value;
1400
1401         return ret;
1402 }
1403
1404 static int cros_ec_handle_non_uhepi_cmd(struct udevice *dev, uint hcmd,
1405                                         uint action, uint64_t *value)
1406 {
1407         int ret = -1;
1408         struct ec_params_host_event_mask req;
1409         struct ec_response_host_event_mask rsp;
1410
1411         if (hcmd == INVALID_HCMD)
1412                 return ret;
1413
1414         if (action != EC_HOST_EVENT_GET)
1415                 req.mask = (uint32_t)*value;
1416         else
1417                 *value = 0;
1418
1419         ret = ec_command(dev, hcmd, 0, &req, sizeof(req), &rsp, sizeof(rsp));
1420         if (action != EC_HOST_EVENT_GET)
1421                 return ret;
1422         if (ret == 0)
1423                 *value = rsp.mask;
1424
1425         return ret;
1426 }
1427
1428 bool cros_ec_is_uhepi_supported(struct udevice *dev)
1429 {
1430 #define UHEPI_SUPPORTED 1
1431 #define UHEPI_NOT_SUPPORTED 2
1432         static int uhepi_support;
1433
1434         if (!uhepi_support) {
1435                 uhepi_support = cros_ec_check_feature(dev,
1436                         EC_FEATURE_UNIFIED_WAKE_MASKS) > 0 ? UHEPI_SUPPORTED :
1437                         UHEPI_NOT_SUPPORTED;
1438                 log_debug("Chrome EC: UHEPI %s\n",
1439                           uhepi_support == UHEPI_SUPPORTED ? "supported" :
1440                           "not supported");
1441         }
1442         return uhepi_support == UHEPI_SUPPORTED;
1443 }
1444
1445 static int cros_ec_get_mask(struct udevice *dev, uint type)
1446 {
1447         u64 value = 0;
1448
1449         if (cros_ec_is_uhepi_supported(dev)) {
1450                 cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_GET, &value);
1451         } else {
1452                 assert(type < ARRAY_SIZE(event_map));
1453                 cros_ec_handle_non_uhepi_cmd(dev, event_map[type].get_cmd,
1454                                              EC_HOST_EVENT_GET, &value);
1455         }
1456         return value;
1457 }
1458
1459 static int cros_ec_clear_mask(struct udevice *dev, uint type, u64 mask)
1460 {
1461         if (cros_ec_is_uhepi_supported(dev))
1462                 return cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_CLEAR, &mask);
1463
1464         assert(type < ARRAY_SIZE(event_map));
1465
1466         return cros_ec_handle_non_uhepi_cmd(dev, event_map[type].clear_cmd,
1467                                             EC_HOST_EVENT_CLEAR, &mask);
1468 }
1469
1470 uint64_t cros_ec_get_events_b(struct udevice *dev)
1471 {
1472         return cros_ec_get_mask(dev, EC_HOST_EVENT_B);
1473 }
1474
1475 int cros_ec_clear_events_b(struct udevice *dev, uint64_t mask)
1476 {
1477         log_debug("Chrome EC: clear events_b mask to 0x%016llx\n", mask);
1478
1479         return cros_ec_clear_mask(dev, EC_HOST_EVENT_B, mask);
1480 }
1481
1482 int cros_ec_read_limit_power(struct udevice *dev, int *limit_powerp)
1483 {
1484         struct ec_params_charge_state p;
1485         struct ec_response_charge_state r;
1486         int ret;
1487
1488         p.cmd = CHARGE_STATE_CMD_GET_PARAM;
1489         p.get_param.param = CS_PARAM_LIMIT_POWER;
1490         ret = ec_command(dev, EC_CMD_CHARGE_STATE, 0, &p, sizeof(p),
1491                          &r, sizeof(r));
1492
1493         /*
1494          * If our EC doesn't support the LIMIT_POWER parameter, assume that
1495          * LIMIT_POWER is not requested.
1496          */
1497         if (ret == -EC_RES_INVALID_PARAM || ret == -EC_RES_INVALID_COMMAND) {
1498                 log_warning("PARAM_LIMIT_POWER not supported by EC\n");
1499                 return -ENOSYS;
1500         }
1501
1502         if (ret != sizeof(r.get_param))
1503                 return -EINVAL;
1504
1505         *limit_powerp = r.get_param.value;
1506         return 0;
1507 }
1508
1509 int cros_ec_config_powerbtn(struct udevice *dev, uint32_t flags)
1510 {
1511         struct ec_params_config_power_button params;
1512         int ret;
1513
1514         params.flags = flags;
1515         ret = ec_command(dev, EC_CMD_CONFIG_POWER_BUTTON, 0,
1516                          &params, sizeof(params), NULL, 0);
1517         if (ret < 0)
1518                 return ret;
1519
1520         return 0;
1521 }
1522
1523 int cros_ec_get_lid_shutdown_mask(struct udevice *dev)
1524 {
1525         u32 mask;
1526         int ret;
1527
1528         ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
1529                                      &mask);
1530         if (ret < 0)
1531                 return ret;
1532
1533         return !!(mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED));
1534 }
1535
1536 int cros_ec_set_lid_shutdown_mask(struct udevice *dev, int enable)
1537 {
1538         u32 mask;
1539         int ret;
1540
1541         ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
1542                                      &mask);
1543         if (ret < 0)
1544                 return ret;
1545
1546         /* Set lid close event state in the EC SMI event mask */
1547         if (enable)
1548                 mask |= EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
1549         else
1550                 mask &= ~EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
1551
1552         ret = cros_ec_set_event_mask(dev, EC_CMD_HOST_EVENT_SET_SMI_MASK, mask);
1553         if (ret < 0)
1554                 return ret;
1555
1556         printf("EC: %sabled lid close event\n", enable ? "en" : "dis");
1557         return 0;
1558 }
1559
1560 int cros_ec_vstore_supported(struct udevice *dev)
1561 {
1562         return cros_ec_check_feature(dev, EC_FEATURE_VSTORE);
1563 }
1564
1565 int cros_ec_vstore_info(struct udevice *dev, u32 *lockedp)
1566 {
1567         struct ec_response_vstore_info *resp;
1568
1569         if (ec_command_inptr(dev, EC_CMD_VSTORE_INFO, 0, NULL, 0,
1570                              (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
1571                 return -EIO;
1572
1573         if (lockedp)
1574                 *lockedp = resp->slot_locked;
1575
1576         return resp->slot_count;
1577 }
1578
1579 /*
1580  * cros_ec_vstore_read - Read data from EC vstore slot
1581  *
1582  * @slot: vstore slot to read from
1583  * @data: buffer to store read data, must be EC_VSTORE_SLOT_SIZE bytes
1584  */
1585 int cros_ec_vstore_read(struct udevice *dev, int slot, uint8_t *data)
1586 {
1587         struct ec_params_vstore_read req;
1588         struct ec_response_vstore_read *resp;
1589
1590         req.slot = slot;
1591         if (ec_command_inptr(dev, EC_CMD_VSTORE_READ, 0, &req, sizeof(req),
1592                              (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
1593                 return -EIO;
1594
1595         if (!data || req.slot >= EC_VSTORE_SLOT_MAX)
1596                 return -EINVAL;
1597
1598         memcpy(data, resp->data, sizeof(resp->data));
1599
1600         return 0;
1601 }
1602
1603 /*
1604  * cros_ec_vstore_write - Save data into EC vstore slot
1605  *
1606  * @slot: vstore slot to write into
1607  * @data: data to write
1608  * @size: size of data in bytes
1609  *
1610  * Maximum size of data is EC_VSTORE_SLOT_SIZE.  It is the callers
1611  * responsibility to check the number of implemented slots by
1612  * querying the vstore info.
1613  */
1614 int cros_ec_vstore_write(struct udevice *dev, int slot, const uint8_t *data,
1615                          size_t size)
1616 {
1617         struct ec_params_vstore_write req;
1618
1619         if (slot >= EC_VSTORE_SLOT_MAX || size > EC_VSTORE_SLOT_SIZE)
1620                 return -EINVAL;
1621
1622         req.slot = slot;
1623         memcpy(req.data, data, size);
1624
1625         if (ec_command(dev, EC_CMD_VSTORE_WRITE, 0, &req, sizeof(req), NULL, 0))
1626                 return -EIO;
1627
1628         return 0;
1629 }
1630
1631 int cros_ec_get_switches(struct udevice *dev)
1632 {
1633         struct dm_cros_ec_ops *ops;
1634         int ret;
1635
1636         ops = dm_cros_ec_get_ops(dev);
1637         if (!ops->get_switches)
1638                 return -ENOSYS;
1639
1640         ret = ops->get_switches(dev);
1641         if (ret < 0)
1642                 return log_msg_ret("get", ret);
1643
1644         return ret;
1645 }
1646
1647 UCLASS_DRIVER(cros_ec) = {
1648         .id             = UCLASS_CROS_EC,
1649         .name           = "cros-ec",
1650         .per_device_auto        = sizeof(struct cros_ec_dev),
1651 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
1652         .post_bind      = dm_scan_fdt_dev,
1653 #endif
1654         .flags          = DM_UC_FLAG_ALLOC_PRIV_DMA,
1655 };