Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
[platform/kernel/linux-starfive.git] / drivers / mfd / rave-sp.c
1 // SPDX-License-Identifier: GPL-2.0+
2
3 /*
4  * Multifunction core driver for Zodiac Inflight Innovations RAVE
5  * Supervisory Processor(SP) MCU that is connected via dedicated UART
6  * port
7  *
8  * Copyright (C) 2017 Zodiac Inflight Innovations
9  */
10
11 #include <linux/atomic.h>
12 #include <linux/crc-ccitt.h>
13 #include <linux/delay.h>
14 #include <linux/export.h>
15 #include <linux/init.h>
16 #include <linux/slab.h>
17 #include <linux/kernel.h>
18 #include <linux/mfd/rave-sp.h>
19 #include <linux/module.h>
20 #include <linux/of.h>
21 #include <linux/of_device.h>
22 #include <linux/sched.h>
23 #include <linux/serdev.h>
24 #include <asm/unaligned.h>
25
26 /*
27  * UART protocol using following entities:
28  *  - message to MCU => ACK response
29  *  - event from MCU => event ACK
30  *
31  * Frame structure:
32  * <STX> <DATA> <CHECKSUM> <ETX>
33  * Where:
34  * - STX - is start of transmission character
35  * - ETX - end of transmission
36  * - DATA - payload
37  * - CHECKSUM - checksum calculated on <DATA>
38  *
39  * If <DATA> or <CHECKSUM> contain one of control characters, then it is
40  * escaped using <DLE> control code. Added <DLE> does not participate in
41  * checksum calculation.
42  */
43 #define RAVE_SP_STX                     0x02
44 #define RAVE_SP_ETX                     0x03
45 #define RAVE_SP_DLE                     0x10
46
47 #define RAVE_SP_MAX_DATA_SIZE           64
48 #define RAVE_SP_CHECKSUM_8B2C           1
49 #define RAVE_SP_CHECKSUM_CCITT          2
50 #define RAVE_SP_CHECKSUM_SIZE           RAVE_SP_CHECKSUM_CCITT
51 /*
52  * We don't store STX, ETX and unescaped bytes, so Rx is only
53  * DATA + CSUM
54  */
55 #define RAVE_SP_RX_BUFFER_SIZE                          \
56         (RAVE_SP_MAX_DATA_SIZE + RAVE_SP_CHECKSUM_SIZE)
57
58 #define RAVE_SP_STX_ETX_SIZE            2
59 /*
60  * For Tx we have to have space for everything, STX, EXT and
61  * potentially stuffed DATA + CSUM data + csum
62  */
63 #define RAVE_SP_TX_BUFFER_SIZE                          \
64         (RAVE_SP_STX_ETX_SIZE + 2 * RAVE_SP_RX_BUFFER_SIZE)
65
66 /**
67  * enum rave_sp_deframer_state - Possible state for de-framer
68  *
69  * @RAVE_SP_EXPECT_SOF:          Scanning input for start-of-frame marker
70  * @RAVE_SP_EXPECT_DATA:         Got start of frame marker, collecting frame
71  * @RAVE_SP_EXPECT_ESCAPED_DATA: Got escape character, collecting escaped byte
72  */
73 enum rave_sp_deframer_state {
74         RAVE_SP_EXPECT_SOF,
75         RAVE_SP_EXPECT_DATA,
76         RAVE_SP_EXPECT_ESCAPED_DATA,
77 };
78
79 /**
80  * struct rave_sp_deframer - Device protocol deframer
81  *
82  * @state:  Current state of the deframer
83  * @data:   Buffer used to collect deframed data
84  * @length: Number of bytes de-framed so far
85  */
86 struct rave_sp_deframer {
87         enum rave_sp_deframer_state state;
88         unsigned char data[RAVE_SP_RX_BUFFER_SIZE];
89         size_t length;
90 };
91
92 /**
93  * struct rave_sp_reply - Reply as per RAVE device protocol
94  *
95  * @length:     Expected reply length
96  * @data:       Buffer to store reply payload in
97  * @code:       Expected reply code
98  * @ackid:      Expected reply ACK ID
99  * @received:   Successful reply reception completion
100  */
101 struct rave_sp_reply {
102         size_t length;
103         void  *data;
104         u8     code;
105         u8     ackid;
106         struct completion received;
107 };
108
109 /**
110  * struct rave_sp_checksum - Variant specific checksum implementation details
111  *
112  * @length:     Calculated checksum length
113  * @subroutine: Utilized checksum algorithm implementation
114  */
115 struct rave_sp_checksum {
116         size_t length;
117         void (*subroutine)(const u8 *, size_t, u8 *);
118 };
119
120 struct rave_sp_version {
121         u8     hardware;
122         __le16 major;
123         u8     minor;
124         u8     letter[2];
125 } __packed;
126
127 struct rave_sp_status {
128         struct rave_sp_version bootloader_version;
129         struct rave_sp_version firmware_version;
130         u16 rdu_eeprom_flag;
131         u16 dds_eeprom_flag;
132         u8  pic_flag;
133         u8  orientation;
134         u32 etc;
135         s16 temp[2];
136         u8  backlight_current[3];
137         u8  dip_switch;
138         u8  host_interrupt;
139         u16 voltage_28;
140         u8  i2c_device_status;
141         u8  power_status;
142         u8  general_status;
143         u8  deprecated1;
144         u8  power_led_status;
145         u8  deprecated2;
146         u8  periph_power_shutoff;
147 } __packed;
148
149 /**
150  * struct rave_sp_variant_cmds - Variant specific command routines
151  *
152  * @translate:  Generic to variant specific command mapping routine
153  * @get_status: Variant specific implementation of CMD_GET_STATUS
154  */
155 struct rave_sp_variant_cmds {
156         int (*translate)(enum rave_sp_command);
157         int (*get_status)(struct rave_sp *sp, struct rave_sp_status *);
158 };
159
160 /**
161  * struct rave_sp_variant - RAVE supervisory processor core variant
162  *
163  * @checksum:   Variant specific checksum implementation
164  * @cmd:        Variant specific command pointer table
165  *
166  */
167 struct rave_sp_variant {
168         const struct rave_sp_checksum *checksum;
169         struct rave_sp_variant_cmds cmd;
170 };
171
172 /**
173  * struct rave_sp - RAVE supervisory processor core
174  *
175  * @serdev:                     Pointer to underlying serdev
176  * @deframer:                   Stored state of the protocol deframer
177  * @ackid:                      ACK ID used in last reply sent to the device
178  * @bus_lock:                   Lock to serialize access to the device
179  * @reply_lock:                 Lock protecting @reply
180  * @reply:                      Pointer to memory to store reply payload
181  *
182  * @variant:                    Device variant specific information
183  * @event_notifier_list:        Input event notification chain
184  *
185  * @part_number_firmware:       Firmware version
186  * @part_number_bootloader:     Bootloader version
187  */
188 struct rave_sp {
189         struct serdev_device *serdev;
190         struct rave_sp_deframer deframer;
191         atomic_t ackid;
192         struct mutex bus_lock;
193         struct mutex reply_lock;
194         struct rave_sp_reply *reply;
195
196         const struct rave_sp_variant *variant;
197         struct blocking_notifier_head event_notifier_list;
198
199         const char *part_number_firmware;
200         const char *part_number_bootloader;
201 };
202
203 static bool rave_sp_id_is_event(u8 code)
204 {
205         return (code & 0xF0) == RAVE_SP_EVNT_BASE;
206 }
207
208 static void rave_sp_unregister_event_notifier(struct device *dev, void *res)
209 {
210         struct rave_sp *sp = dev_get_drvdata(dev->parent);
211         struct notifier_block *nb = *(struct notifier_block **)res;
212         struct blocking_notifier_head *bnh = &sp->event_notifier_list;
213
214         WARN_ON(blocking_notifier_chain_unregister(bnh, nb));
215 }
216
217 int devm_rave_sp_register_event_notifier(struct device *dev,
218                                          struct notifier_block *nb)
219 {
220         struct rave_sp *sp = dev_get_drvdata(dev->parent);
221         struct notifier_block **rcnb;
222         int ret;
223
224         rcnb = devres_alloc(rave_sp_unregister_event_notifier,
225                             sizeof(*rcnb), GFP_KERNEL);
226         if (!rcnb)
227                 return -ENOMEM;
228
229         ret = blocking_notifier_chain_register(&sp->event_notifier_list, nb);
230         if (!ret) {
231                 *rcnb = nb;
232                 devres_add(dev, rcnb);
233         } else {
234                 devres_free(rcnb);
235         }
236
237         return ret;
238 }
239 EXPORT_SYMBOL_GPL(devm_rave_sp_register_event_notifier);
240
241 static void csum_8b2c(const u8 *buf, size_t size, u8 *crc)
242 {
243         *crc = *buf++;
244         size--;
245
246         while (size--)
247                 *crc += *buf++;
248
249         *crc = 1 + ~(*crc);
250 }
251
252 static void csum_ccitt(const u8 *buf, size_t size, u8 *crc)
253 {
254         const u16 calculated = crc_ccitt_false(0xffff, buf, size);
255
256         /*
257          * While the rest of the wire protocol is little-endian,
258          * CCITT-16 CRC in RDU2 device is sent out in big-endian order.
259          */
260         put_unaligned_be16(calculated, crc);
261 }
262
263 static void *stuff(unsigned char *dest, const unsigned char *src, size_t n)
264 {
265         while (n--) {
266                 const unsigned char byte = *src++;
267
268                 switch (byte) {
269                 case RAVE_SP_STX:
270                 case RAVE_SP_ETX:
271                 case RAVE_SP_DLE:
272                         *dest++ = RAVE_SP_DLE;
273                         fallthrough;
274                 default:
275                         *dest++ = byte;
276                 }
277         }
278
279         return dest;
280 }
281
282 static int rave_sp_write(struct rave_sp *sp, const u8 *data, u8 data_size)
283 {
284         const size_t checksum_length = sp->variant->checksum->length;
285         unsigned char frame[RAVE_SP_TX_BUFFER_SIZE];
286         unsigned char crc[RAVE_SP_CHECKSUM_SIZE];
287         unsigned char *dest = frame;
288         size_t length;
289
290         if (WARN_ON(checksum_length > sizeof(crc)))
291                 return -ENOMEM;
292
293         if (WARN_ON(data_size > sizeof(frame)))
294                 return -ENOMEM;
295
296         sp->variant->checksum->subroutine(data, data_size, crc);
297
298         *dest++ = RAVE_SP_STX;
299         dest = stuff(dest, data, data_size);
300         dest = stuff(dest, crc, checksum_length);
301         *dest++ = RAVE_SP_ETX;
302
303         length = dest - frame;
304
305         print_hex_dump_debug("rave-sp tx: ", DUMP_PREFIX_NONE,
306                              16, 1, frame, length, false);
307
308         return serdev_device_write(sp->serdev, frame, length, HZ);
309 }
310
311 static u8 rave_sp_reply_code(u8 command)
312 {
313         /*
314          * There isn't a single rule that describes command code ->
315          * ACK code transformation, but, going through various
316          * versions of ICDs, there appear to be three distinct groups
317          * that can be described by simple transformation.
318          */
319         switch (command) {
320         case 0xA0 ... 0xBE:
321                 /*
322                  * Commands implemented by firmware found in RDU1 and
323                  * older devices all seem to obey the following rule
324                  */
325                 return command + 0x20;
326         case 0xE0 ... 0xEF:
327                 /*
328                  * Events emitted by all versions of the firmare use
329                  * least significant bit to get an ACK code
330                  */
331                 return command | 0x01;
332         default:
333                 /*
334                  * Commands implemented by firmware found in RDU2 are
335                  * similar to "old" commands, but they use slightly
336                  * different offset
337                  */
338                 return command + 0x40;
339         }
340 }
341
342 int rave_sp_exec(struct rave_sp *sp,
343                  void *__data,  size_t data_size,
344                  void *reply_data, size_t reply_data_size)
345 {
346         struct rave_sp_reply reply = {
347                 .data     = reply_data,
348                 .length   = reply_data_size,
349                 .received = COMPLETION_INITIALIZER_ONSTACK(reply.received),
350         };
351         unsigned char *data = __data;
352         int command, ret = 0;
353         u8 ackid;
354
355         command = sp->variant->cmd.translate(data[0]);
356         if (command < 0)
357                 return command;
358
359         ackid       = atomic_inc_return(&sp->ackid);
360         reply.ackid = ackid;
361         reply.code  = rave_sp_reply_code((u8)command),
362
363         mutex_lock(&sp->bus_lock);
364
365         mutex_lock(&sp->reply_lock);
366         sp->reply = &reply;
367         mutex_unlock(&sp->reply_lock);
368
369         data[0] = command;
370         data[1] = ackid;
371
372         rave_sp_write(sp, data, data_size);
373
374         if (!wait_for_completion_timeout(&reply.received, HZ)) {
375                 dev_err(&sp->serdev->dev, "Command timeout\n");
376                 ret = -ETIMEDOUT;
377
378                 mutex_lock(&sp->reply_lock);
379                 sp->reply = NULL;
380                 mutex_unlock(&sp->reply_lock);
381         }
382
383         mutex_unlock(&sp->bus_lock);
384         return ret;
385 }
386 EXPORT_SYMBOL_GPL(rave_sp_exec);
387
388 static void rave_sp_receive_event(struct rave_sp *sp,
389                                   const unsigned char *data, size_t length)
390 {
391         u8 cmd[] = {
392                 [0] = rave_sp_reply_code(data[0]),
393                 [1] = data[1],
394         };
395
396         rave_sp_write(sp, cmd, sizeof(cmd));
397
398         blocking_notifier_call_chain(&sp->event_notifier_list,
399                                      rave_sp_action_pack(data[0], data[2]),
400                                      NULL);
401 }
402
403 static void rave_sp_receive_reply(struct rave_sp *sp,
404                                   const unsigned char *data, size_t length)
405 {
406         struct device *dev = &sp->serdev->dev;
407         struct rave_sp_reply *reply;
408         const  size_t payload_length = length - 2;
409
410         mutex_lock(&sp->reply_lock);
411         reply = sp->reply;
412
413         if (reply) {
414                 if (reply->code == data[0] && reply->ackid == data[1] &&
415                     payload_length >= reply->length) {
416                         /*
417                          * We are relying on memcpy(dst, src, 0) to be a no-op
418                          * when handling commands that have a no-payload reply
419                          */
420                         memcpy(reply->data, &data[2], reply->length);
421                         complete(&reply->received);
422                         sp->reply = NULL;
423                 } else {
424                         dev_err(dev, "Ignoring incorrect reply\n");
425                         dev_dbg(dev, "Code:   expected = 0x%08x received = 0x%08x\n",
426                                 reply->code, data[0]);
427                         dev_dbg(dev, "ACK ID: expected = 0x%08x received = 0x%08x\n",
428                                 reply->ackid, data[1]);
429                         dev_dbg(dev, "Length: expected = %zu received = %zu\n",
430                                 reply->length, payload_length);
431                 }
432         }
433
434         mutex_unlock(&sp->reply_lock);
435 }
436
437 static void rave_sp_receive_frame(struct rave_sp *sp,
438                                   const unsigned char *data,
439                                   size_t length)
440 {
441         const size_t checksum_length = sp->variant->checksum->length;
442         const size_t payload_length  = length - checksum_length;
443         const u8 *crc_reported       = &data[payload_length];
444         struct device *dev           = &sp->serdev->dev;
445         u8 crc_calculated[RAVE_SP_CHECKSUM_SIZE];
446
447         if (unlikely(checksum_length > sizeof(crc_calculated))) {
448                 dev_warn(dev, "Checksum too long, dropping\n");
449                 return;
450         }
451
452         print_hex_dump_debug("rave-sp rx: ", DUMP_PREFIX_NONE,
453                              16, 1, data, length, false);
454
455         if (unlikely(length <= checksum_length)) {
456                 dev_warn(dev, "Dropping short frame\n");
457                 return;
458         }
459
460         sp->variant->checksum->subroutine(data, payload_length,
461                                           crc_calculated);
462
463         if (memcmp(crc_calculated, crc_reported, checksum_length)) {
464                 dev_warn(dev, "Dropping bad frame\n");
465                 return;
466         }
467
468         if (rave_sp_id_is_event(data[0]))
469                 rave_sp_receive_event(sp, data, length);
470         else
471                 rave_sp_receive_reply(sp, data, length);
472 }
473
474 static int rave_sp_receive_buf(struct serdev_device *serdev,
475                                const unsigned char *buf, size_t size)
476 {
477         struct device *dev = &serdev->dev;
478         struct rave_sp *sp = dev_get_drvdata(dev);
479         struct rave_sp_deframer *deframer = &sp->deframer;
480         const unsigned char *src = buf;
481         const unsigned char *end = buf + size;
482
483         while (src < end) {
484                 const unsigned char byte = *src++;
485
486                 switch (deframer->state) {
487                 case RAVE_SP_EXPECT_SOF:
488                         if (byte == RAVE_SP_STX)
489                                 deframer->state = RAVE_SP_EXPECT_DATA;
490                         break;
491
492                 case RAVE_SP_EXPECT_DATA:
493                         /*
494                          * Treat special byte values first
495                          */
496                         switch (byte) {
497                         case RAVE_SP_ETX:
498                                 rave_sp_receive_frame(sp,
499                                                       deframer->data,
500                                                       deframer->length);
501                                 /*
502                                  * Once we extracted a complete frame
503                                  * out of a stream, we call it done
504                                  * and proceed to bailing out while
505                                  * resetting the framer to initial
506                                  * state, regardless if we've consumed
507                                  * all of the stream or not.
508                                  */
509                                 goto reset_framer;
510                         case RAVE_SP_STX:
511                                 dev_warn(dev, "Bad frame: STX before ETX\n");
512                                 /*
513                                  * If we encounter second "start of
514                                  * the frame" marker before seeing
515                                  * corresponding "end of frame", we
516                                  * reset the framer and ignore both:
517                                  * frame started by first SOF and
518                                  * frame started by current SOF.
519                                  *
520                                  * NOTE: The above means that only the
521                                  * frame started by third SOF, sent
522                                  * after this one will have a chance
523                                  * to get throught.
524                                  */
525                                 goto reset_framer;
526                         case RAVE_SP_DLE:
527                                 deframer->state = RAVE_SP_EXPECT_ESCAPED_DATA;
528                                 /*
529                                  * If we encounter escape sequence we
530                                  * need to skip it and collect the
531                                  * byte that follows. We do it by
532                                  * forcing the next iteration of the
533                                  * encompassing while loop.
534                                  */
535                                 continue;
536                         }
537                         /*
538                          * For the rest of the bytes, that are not
539                          * speical snoflakes, we do the same thing
540                          * that we do to escaped data - collect it in
541                          * deframer buffer
542                          */
543
544                         fallthrough;
545
546                 case RAVE_SP_EXPECT_ESCAPED_DATA:
547                         if (deframer->length == sizeof(deframer->data)) {
548                                 dev_warn(dev, "Bad frame: Too long\n");
549                                 /*
550                                  * If the amount of data we've
551                                  * accumulated for current frame so
552                                  * far starts to exceed the capacity
553                                  * of deframer's buffer, there's
554                                  * nothing else we can do but to
555                                  * discard that data and start
556                                  * assemblying a new frame again
557                                  */
558                                 goto reset_framer;
559                         }
560
561                         deframer->data[deframer->length++] = byte;
562
563                         /*
564                          * We've extracted out special byte, now we
565                          * can go back to regular data collecting
566                          */
567                         deframer->state = RAVE_SP_EXPECT_DATA;
568                         break;
569                 }
570         }
571
572         /*
573          * The only way to get out of the above loop and end up here
574          * is throught consuming all of the supplied data, so here we
575          * report that we processed it all.
576          */
577         return size;
578
579 reset_framer:
580         /*
581          * NOTE: A number of codepaths that will drop us here will do
582          * so before consuming all 'size' bytes of the data passed by
583          * serdev layer. We rely on the fact that serdev layer will
584          * re-execute this handler with the remainder of the Rx bytes
585          * once we report actual number of bytes that we processed.
586          */
587         deframer->state  = RAVE_SP_EXPECT_SOF;
588         deframer->length = 0;
589
590         return src - buf;
591 }
592
593 static int rave_sp_rdu1_cmd_translate(enum rave_sp_command command)
594 {
595         if (command >= RAVE_SP_CMD_STATUS &&
596             command <= RAVE_SP_CMD_CONTROL_EVENTS)
597                 return command;
598
599         return -EINVAL;
600 }
601
602 static int rave_sp_rdu2_cmd_translate(enum rave_sp_command command)
603 {
604         if (command >= RAVE_SP_CMD_GET_FIRMWARE_VERSION &&
605             command <= RAVE_SP_CMD_GET_GPIO_STATE)
606                 return command;
607
608         if (command == RAVE_SP_CMD_REQ_COPPER_REV) {
609                 /*
610                  * As per RDU2 ICD 3.4.47 CMD_GET_COPPER_REV code is
611                  * different from that for RDU1 and it is set to 0x28.
612                  */
613                 return 0x28;
614         }
615
616         return rave_sp_rdu1_cmd_translate(command);
617 }
618
619 static int rave_sp_default_cmd_translate(enum rave_sp_command command)
620 {
621         /*
622          * All of the following command codes were taken from "Table :
623          * Communications Protocol Message Types" in section 3.3
624          * "MESSAGE TYPES" of Rave PIC24 ICD.
625          */
626         switch (command) {
627         case RAVE_SP_CMD_GET_FIRMWARE_VERSION:
628                 return 0x11;
629         case RAVE_SP_CMD_GET_BOOTLOADER_VERSION:
630                 return 0x12;
631         case RAVE_SP_CMD_BOOT_SOURCE:
632                 return 0x14;
633         case RAVE_SP_CMD_SW_WDT:
634                 return 0x1C;
635         case RAVE_SP_CMD_PET_WDT:
636                 return 0x1D;
637         case RAVE_SP_CMD_RESET:
638                 return 0x1E;
639         case RAVE_SP_CMD_RESET_REASON:
640                 return 0x1F;
641         case RAVE_SP_CMD_RMB_EEPROM:
642                 return 0x20;
643         default:
644                 return -EINVAL;
645         }
646 }
647
648 static const char *devm_rave_sp_version(struct device *dev,
649                                         struct rave_sp_version *version)
650 {
651         /*
652          * NOTE: The format string below uses %02d to display u16
653          * intentionally for the sake of backwards compatibility with
654          * legacy software.
655          */
656         return devm_kasprintf(dev, GFP_KERNEL, "%02d%02d%02d.%c%c\n",
657                               version->hardware,
658                               le16_to_cpu(version->major),
659                               version->minor,
660                               version->letter[0],
661                               version->letter[1]);
662 }
663
664 static int rave_sp_rdu1_get_status(struct rave_sp *sp,
665                                    struct rave_sp_status *status)
666 {
667         u8 cmd[] = {
668                 [0] = RAVE_SP_CMD_STATUS,
669                 [1] = 0
670         };
671
672         return rave_sp_exec(sp, cmd, sizeof(cmd), status, sizeof(*status));
673 }
674
675 static int rave_sp_emulated_get_status(struct rave_sp *sp,
676                                        struct rave_sp_status *status)
677 {
678         u8 cmd[] = {
679                 [0] = RAVE_SP_CMD_GET_FIRMWARE_VERSION,
680                 [1] = 0,
681         };
682         int ret;
683
684         ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status->firmware_version,
685                            sizeof(status->firmware_version));
686         if (ret)
687                 return ret;
688
689         cmd[0] = RAVE_SP_CMD_GET_BOOTLOADER_VERSION;
690         return rave_sp_exec(sp, cmd, sizeof(cmd), &status->bootloader_version,
691                             sizeof(status->bootloader_version));
692 }
693
694 static int rave_sp_get_status(struct rave_sp *sp)
695 {
696         struct device *dev = &sp->serdev->dev;
697         struct rave_sp_status status;
698         const char *version;
699         int ret;
700
701         ret = sp->variant->cmd.get_status(sp, &status);
702         if (ret)
703                 return ret;
704
705         version = devm_rave_sp_version(dev, &status.firmware_version);
706         if (!version)
707                 return -ENOMEM;
708
709         sp->part_number_firmware = version;
710
711         version = devm_rave_sp_version(dev, &status.bootloader_version);
712         if (!version)
713                 return -ENOMEM;
714
715         sp->part_number_bootloader = version;
716
717         return 0;
718 }
719
720 static const struct rave_sp_checksum rave_sp_checksum_8b2c = {
721         .length     = 1,
722         .subroutine = csum_8b2c,
723 };
724
725 static const struct rave_sp_checksum rave_sp_checksum_ccitt = {
726         .length     = 2,
727         .subroutine = csum_ccitt,
728 };
729
730 static const struct rave_sp_variant rave_sp_legacy = {
731         .checksum = &rave_sp_checksum_ccitt,
732         .cmd = {
733                 .translate = rave_sp_default_cmd_translate,
734                 .get_status = rave_sp_emulated_get_status,
735         },
736 };
737
738 static const struct rave_sp_variant rave_sp_rdu1 = {
739         .checksum = &rave_sp_checksum_8b2c,
740         .cmd = {
741                 .translate = rave_sp_rdu1_cmd_translate,
742                 .get_status = rave_sp_rdu1_get_status,
743         },
744 };
745
746 static const struct rave_sp_variant rave_sp_rdu2 = {
747         .checksum = &rave_sp_checksum_ccitt,
748         .cmd = {
749                 .translate = rave_sp_rdu2_cmd_translate,
750                 .get_status = rave_sp_emulated_get_status,
751         },
752 };
753
754 static const struct of_device_id rave_sp_dt_ids[] = {
755         { .compatible = "zii,rave-sp-niu",  .data = &rave_sp_legacy },
756         { .compatible = "zii,rave-sp-mezz", .data = &rave_sp_legacy },
757         { .compatible = "zii,rave-sp-esb",  .data = &rave_sp_legacy },
758         { .compatible = "zii,rave-sp-rdu1", .data = &rave_sp_rdu1   },
759         { .compatible = "zii,rave-sp-rdu2", .data = &rave_sp_rdu2   },
760         { /* sentinel */ }
761 };
762
763 static const struct serdev_device_ops rave_sp_serdev_device_ops = {
764         .receive_buf  = rave_sp_receive_buf,
765         .write_wakeup = serdev_device_write_wakeup,
766 };
767
768 static int rave_sp_probe(struct serdev_device *serdev)
769 {
770         struct device *dev = &serdev->dev;
771         const char *unknown = "unknown\n";
772         struct rave_sp *sp;
773         u32 baud;
774         int ret;
775
776         if (of_property_read_u32(dev->of_node, "current-speed", &baud)) {
777                 dev_err(dev,
778                         "'current-speed' is not specified in device node\n");
779                 return -EINVAL;
780         }
781
782         sp = devm_kzalloc(dev, sizeof(*sp), GFP_KERNEL);
783         if (!sp)
784                 return -ENOMEM;
785
786         sp->serdev = serdev;
787         dev_set_drvdata(dev, sp);
788
789         sp->variant = of_device_get_match_data(dev);
790         if (!sp->variant)
791                 return -ENODEV;
792
793         mutex_init(&sp->bus_lock);
794         mutex_init(&sp->reply_lock);
795         BLOCKING_INIT_NOTIFIER_HEAD(&sp->event_notifier_list);
796
797         serdev_device_set_client_ops(serdev, &rave_sp_serdev_device_ops);
798         ret = devm_serdev_device_open(dev, serdev);
799         if (ret)
800                 return ret;
801
802         serdev_device_set_baudrate(serdev, baud);
803         serdev_device_set_flow_control(serdev, false);
804
805         ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
806         if (ret) {
807                 dev_err(dev, "Failed to set parity\n");
808                 return ret;
809         }
810
811         ret = rave_sp_get_status(sp);
812         if (ret) {
813                 dev_warn(dev, "Failed to get firmware status: %d\n", ret);
814                 sp->part_number_firmware   = unknown;
815                 sp->part_number_bootloader = unknown;
816         }
817
818         /*
819          * Those strings already have a \n embedded, so there's no
820          * need to have one in format string.
821          */
822         dev_info(dev, "Firmware version: %s",   sp->part_number_firmware);
823         dev_info(dev, "Bootloader version: %s", sp->part_number_bootloader);
824
825         return devm_of_platform_populate(dev);
826 }
827
828 MODULE_DEVICE_TABLE(of, rave_sp_dt_ids);
829
830 static struct serdev_device_driver rave_sp_drv = {
831         .probe                  = rave_sp_probe,
832         .driver = {
833                 .name           = "rave-sp",
834                 .of_match_table = rave_sp_dt_ids,
835         },
836 };
837 module_serdev_device_driver(rave_sp_drv);
838
839 MODULE_LICENSE("GPL");
840 MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>");
841 MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>");
842 MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
843 MODULE_DESCRIPTION("RAVE SP core driver");