drivers/mfd/omap-usb-tll.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
   4  *
   5  * Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com
   6  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
   7  * Author: Roger Quadros <rogerq@ti.com>
   8  */
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/types.h>
  12 #include <linux/slab.h>
  13 #include <linux/spinlock.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/clk.h>
  16 #include <linux/io.h>
  17 #include <linux/err.h>
  18 #include <linux/pm_runtime.h>
  19 #include <linux/platform_data/usb-omap.h>
  20 #include <linux/of.h>
  21
  22 #include "omap-usb.h"
  23
  24 #define USBTLL_DRIVER_NAME      "usbhs_tll"
  25
  26 /* TLL Register Set */
  27 #define OMAP_USBTLL_REVISION                            (0x00)
  28 #define OMAP_USBTLL_SYSCONFIG                           (0x10)
  29 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
  30 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
  31 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
  32 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
  33 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)
  34
  35 #define OMAP_USBTLL_SYSSTATUS                           (0x14)
  36 #define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)
  37
  38 #define OMAP_USBTLL_IRQSTATUS                           (0x18)
  39 #define OMAP_USBTLL_IRQENABLE                           (0x1C)
  40
  41 #define OMAP_TLL_SHARED_CONF                            (0x30)
  42 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
  43 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
  44 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
  45 #define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
  46 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)
  47
  48 #define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
  49 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
  50 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS                   (1 << 16)
  51 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS                  (1 << 15)
  52 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
  53 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
  54 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
  55 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
  56 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI     (2 << 1)
  57 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
  58 #define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)
  59
  60 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
  61 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
  62 #define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
  63 #define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
  64 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
  65 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
  66 #define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
  67 #define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
  68 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
  69 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB
  70
  71 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
  72 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
  73 #define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
  74 #define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
  75 #define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
  76 #define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
  77 #define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
  78 #define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
  79 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)
  80
  81 #define OMAP_REV2_TLL_CHANNEL_COUNT                     2
  82 #define OMAP_TLL_CHANNEL_COUNT                          3
  83 #define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
  84 #define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
  85 #define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)
  86
  87 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
  88 #define OMAP_USBTLL_REV1                0x00000015      /* OMAP3 */
  89 #define OMAP_USBTLL_REV2                0x00000018      /* OMAP 3630 */
  90 #define OMAP_USBTLL_REV3                0x00000004      /* OMAP4 */
  91 #define OMAP_USBTLL_REV4                0x00000006      /* OMAP5 */
  92
  93 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
  94
  95 /* only PHY and UNUSED modes don't need TLL */
  96 #define omap_usb_mode_needs_tll(x)      ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
  97                                          (x) != OMAP_EHCI_PORT_MODE_PHY)
  98
  99 struct usbtll_omap {
 100         void __iomem    *base;
 101         int             nch;            /* num. of channels */
 102         struct clk      *ch_clk[];      /* must be the last member */
 103 };
 104
 105 /*-------------------------------------------------------------------------*/
 106
 107 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
 108 static struct device    *tll_dev;
 109 static DEFINE_SPINLOCK(tll_lock);       /* serialize access to tll_dev */
 110
 111 /*-------------------------------------------------------------------------*/
 112
 113 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
 114 {
 115         writel_relaxed(val, base + reg);
 116 }
 117
 118 static inline u32 usbtll_read(void __iomem *base, u32 reg)
 119 {
 120         return readl_relaxed(base + reg);
 121 }
 122
 123 static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
 124 {
 125         writeb_relaxed(val, base + reg);
 126 }
 127
 128 static inline u8 usbtll_readb(void __iomem *base, u32 reg)
 129 {
 130         return readb_relaxed(base + reg);
 131 }
 132
 133 /*-------------------------------------------------------------------------*/
 134
 135 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 136 {
 137         switch (pmode) {
 138         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 139         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 140         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 141         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 142         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 143         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 144         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 145         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 146         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 147         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 148                 return true;
 149
 150         default:
 151                 return false;
 152         }
 153 }
 154
 155 /*
 156  * convert the port-mode enum to a value we can use in the FSLSMODE
 157  * field of USBTLL_CHANNEL_CONF
 158  */
 159 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 160 {
 161         switch (mode) {
 162         case OMAP_USBHS_PORT_MODE_UNUSED:
 163         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 164                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 165
 166         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 167                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
 168
 169         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 170                 return OMAP_TLL_FSLSMODE_3PIN_PHY;
 171
 172         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 173                 return OMAP_TLL_FSLSMODE_4PIN_PHY;
 174
 175         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 176                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
 177
 178         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 179                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
 180
 181         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 182                 return OMAP_TLL_FSLSMODE_3PIN_TLL;
 183
 184         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 185                 return OMAP_TLL_FSLSMODE_4PIN_TLL;
 186
 187         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 188                 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
 189
 190         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 191                 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
 192         default:
 193                 pr_warn("Invalid port mode, using default\n");
 194                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 195         }
 196 }
 197
 198 /**
 199  * usbtll_omap_probe - initialize TI-based HCDs
 200  *
 201  * Allocates basic resources for this USB host controller.
 202  *
 203  * @pdev: Pointer to this device's platform device structure
 204  */
 205 static int usbtll_omap_probe(struct platform_device *pdev)
 206 {
 207         struct device                           *dev =  &pdev->dev;
 208         struct resource                         *res;
 209         struct usbtll_omap                      *tll;
 210         void __iomem                            *base;
 211         int                                     i, nch, ver;
 212
 213         dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 214
 215         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 216         base = devm_ioremap_resource(dev, res);
 217         if (IS_ERR(base))
 218                 return PTR_ERR(base);
 219
 220         pm_runtime_enable(dev);
 221         pm_runtime_get_sync(dev);
 222
 223         ver = usbtll_read(base, OMAP_USBTLL_REVISION);
 224         switch (ver) {
 225         case OMAP_USBTLL_REV1:
 226         case OMAP_USBTLL_REV4:
 227                 nch = OMAP_TLL_CHANNEL_COUNT;
 228                 break;
 229         case OMAP_USBTLL_REV2:
 230         case OMAP_USBTLL_REV3:
 231                 nch = OMAP_REV2_TLL_CHANNEL_COUNT;
 232                 break;
 233         default:
 234                 nch = OMAP_TLL_CHANNEL_COUNT;
 235                 dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n",
 236                         ver, nch);
 237                 break;
 238         }
 239
 240         tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
 241                            GFP_KERNEL);
 242         if (!tll) {
 243                 pm_runtime_put_sync(dev);
 244                 pm_runtime_disable(dev);
 245                 return -ENOMEM;
 246         }
 247
 248         tll->base = base;
 249         tll->nch = nch;
 250         platform_set_drvdata(pdev, tll);
 251
 252         for (i = 0; i < nch; i++) {
 253                 char clkname[] = "usb_tll_hs_usb_chx_clk";
 254
 255                 snprintf(clkname, sizeof(clkname),
 256                                         "usb_tll_hs_usb_ch%d_clk", i);
 257                 tll->ch_clk[i] = clk_get(dev, clkname);
 258
 259                 if (IS_ERR(tll->ch_clk[i]))
 260                         dev_dbg(dev, "can't get clock : %s\n", clkname);
 261                 else
 262                         clk_prepare(tll->ch_clk[i]);
 263         }
 264
 265         pm_runtime_put_sync(dev);
 266         /* only after this can omap_tll_enable/disable work */
 267         spin_lock(&tll_lock);
 268         tll_dev = dev;
 269         spin_unlock(&tll_lock);
 270
 271         return 0;
 272 }
 273
 274 /**
 275  * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
 276  * @pdev: USB Host Controller being removed
 277  *
 278  * Reverses the effect of usbtll_omap_probe().
 279  */
 280 static int usbtll_omap_remove(struct platform_device *pdev)
 281 {
 282         struct usbtll_omap *tll = platform_get_drvdata(pdev);
 283         int i;
 284
 285         spin_lock(&tll_lock);
 286         tll_dev = NULL;
 287         spin_unlock(&tll_lock);
 288
 289         for (i = 0; i < tll->nch; i++) {
 290                 if (!IS_ERR(tll->ch_clk[i])) {
 291                         clk_unprepare(tll->ch_clk[i]);
 292                         clk_put(tll->ch_clk[i]);
 293                 }
 294         }
 295
 296         pm_runtime_disable(&pdev->dev);
 297         return 0;
 298 }
 299
 300 static const struct of_device_id usbtll_omap_dt_ids[] = {
 301         { .compatible = "ti,usbhs-tll" },
 302         { }
 303 };
 304
 305 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
 306
 307 static struct platform_driver usbtll_omap_driver = {
 308         .driver = {
 309                 .name           = usbtll_driver_name,
 310                 .of_match_table = usbtll_omap_dt_ids,
 311         },
 312         .probe          = usbtll_omap_probe,
 313         .remove         = usbtll_omap_remove,
 314 };
 315
 316 int omap_tll_init(struct usbhs_omap_platform_data *pdata)
 317 {
 318         int i;
 319         bool needs_tll;
 320         unsigned reg;
 321         struct usbtll_omap *tll;
 322
 323         if (!tll_dev)
 324                 return -ENODEV;
 325
 326         pm_runtime_get_sync(tll_dev);
 327
 328         spin_lock(&tll_lock);
 329         tll = dev_get_drvdata(tll_dev);
 330         needs_tll = false;
 331         for (i = 0; i < tll->nch; i++)
 332                 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
 333
 334         if (needs_tll) {
 335                 void __iomem *base = tll->base;
 336
 337                 /* Program Common TLL register */
 338                 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
 339                 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
 340                         | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
 341                 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
 342                 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
 343
 344                 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
 345
 346                 /* Enable channels now */
 347                 for (i = 0; i < tll->nch; i++) {
 348                         reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
 349
 350                         if (is_ohci_port(pdata->port_mode[i])) {
 351                                 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
 352                                 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
 353                                 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
 354                         } else if (pdata->port_mode[i] ==
 355                                         OMAP_EHCI_PORT_MODE_TLL) {
 356                                 /*
 357                                  * Disable UTMI AutoIdle, BitStuffing
 358                                  * and use SDR Mode. Enable ULPI AutoIdle.
 359                                  */
 360                                 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
 361                                         | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
 362                                 reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 363                                 reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
 364                         } else if (pdata->port_mode[i] ==
 365                                         OMAP_EHCI_PORT_MODE_HSIC) {
 366                                 /*
 367                                  * HSIC Mode requires UTMI port configurations
 368                                  */
 369                                 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
 370                                  | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
 371                                  | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
 372                                  | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 373                         } else {
 374                                 continue;
 375                         }
 376                         reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
 377                         usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
 378
 379                         usbtll_writeb(base,
 380                                       OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
 381                                       0xbe);
 382                 }
 383         }
 384
 385         spin_unlock(&tll_lock);
 386         pm_runtime_put_sync(tll_dev);
 387
 388         return 0;
 389 }
 390 EXPORT_SYMBOL_GPL(omap_tll_init);
 391
 392 int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 393 {
 394         int i;
 395         struct usbtll_omap *tll;
 396
 397         if (!tll_dev)
 398                 return -ENODEV;
 399
 400         pm_runtime_get_sync(tll_dev);
 401
 402         spin_lock(&tll_lock);
 403         tll = dev_get_drvdata(tll_dev);
 404
 405         for (i = 0; i < tll->nch; i++) {
 406                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 407                         int r;
 408
 409                         if (IS_ERR(tll->ch_clk[i]))
 410                                 continue;
 411
 412                         r = clk_enable(tll->ch_clk[i]);
 413                         if (r) {
 414                                 dev_err(tll_dev,
 415                                  "Error enabling ch %d clock: %d\n", i, r);
 416                         }
 417                 }
 418         }
 419
 420         spin_unlock(&tll_lock);
 421
 422         return 0;
 423 }
 424 EXPORT_SYMBOL_GPL(omap_tll_enable);
 425
 426 int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 427 {
 428         int i;
 429         struct usbtll_omap *tll;
 430
 431         if (!tll_dev)
 432                 return -ENODEV;
 433
 434         spin_lock(&tll_lock);
 435         tll = dev_get_drvdata(tll_dev);
 436
 437         for (i = 0; i < tll->nch; i++) {
 438                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 439                         if (!IS_ERR(tll->ch_clk[i]))
 440                                 clk_disable(tll->ch_clk[i]);
 441                 }
 442         }
 443
 444         spin_unlock(&tll_lock);
 445         pm_runtime_put_sync(tll_dev);
 446
 447         return 0;
 448 }
 449 EXPORT_SYMBOL_GPL(omap_tll_disable);
 450
 451 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
 452 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 453 MODULE_LICENSE("GPL v2");
 454 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
 455
 456 static int __init omap_usbtll_drvinit(void)
 457 {
 458         return platform_driver_register(&usbtll_omap_driver);
 459 }
 460
 461 /*
 462  * init before usbhs core driver;
 463  * The usbtll driver should be initialized before
 464  * the usbhs core driver probe function is called.
 465  */
 466 fs_initcall(omap_usbtll_drvinit);
 467
 468 static void __exit omap_usbtll_drvexit(void)
 469 {
 470         platform_driver_unregister(&usbtll_omap_driver);
 471 }
 472 module_exit(omap_usbtll_drvexit);