drivers/mfd/omap-usb-host.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
   4  *
   5  * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com
   6  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
   7  * Author: Roger Quadros <rogerq@ti.com>
   8  */
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/types.h>
  12 #include <linux/slab.h>
  13 #include <linux/delay.h>
  14 #include <linux/clk.h>
  15 #include <linux/dma-mapping.h>
  16 #include <linux/gpio.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/platform_data/usb-omap.h>
  19 #include <linux/pm_runtime.h>
  20 #include <linux/of.h>
  21 #include <linux/of_platform.h>
  22 #include <linux/err.h>
  23
  24 #include "omap-usb.h"
  25
  26 #define USBHS_DRIVER_NAME       "usbhs_omap"
  27 #define OMAP_EHCI_DEVICE        "ehci-omap"
  28 #define OMAP_OHCI_DEVICE        "ohci-omap3"
  29
  30 /* OMAP USBHOST Register addresses  */
  31
  32 /* UHH Register Set */
  33 #define OMAP_UHH_REVISION                               (0x00)
  34 #define OMAP_UHH_SYSCONFIG                              (0x10)
  35 #define OMAP_UHH_SYSCONFIG_MIDLEMODE                    (1 << 12)
  36 #define OMAP_UHH_SYSCONFIG_CACTIVITY                    (1 << 8)
  37 #define OMAP_UHH_SYSCONFIG_SIDLEMODE                    (1 << 3)
  38 #define OMAP_UHH_SYSCONFIG_ENAWAKEUP                    (1 << 2)
  39 #define OMAP_UHH_SYSCONFIG_SOFTRESET                    (1 << 1)
  40 #define OMAP_UHH_SYSCONFIG_AUTOIDLE                     (1 << 0)
  41
  42 #define OMAP_UHH_SYSSTATUS                              (0x14)
  43 #define OMAP_UHH_HOSTCONFIG                             (0x40)
  44 #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS                 (1 << 0)
  45 #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              (1 << 0)
  46 #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
  47 #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
  48 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
  49 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
  50 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
  51 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
  52 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS           (1 << 8)
  53 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
  54 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
  55 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)
  56
  57 /* OMAP4-specific defines */
  58 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
  59 #define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
  60 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
  61 #define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
  62 #define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)
  63
  64 #define OMAP4_P1_MODE_CLEAR                             (3 << 16)
  65 #define OMAP4_P1_MODE_TLL                               (1 << 16)
  66 #define OMAP4_P1_MODE_HSIC                              (3 << 16)
  67 #define OMAP4_P2_MODE_CLEAR                             (3 << 18)
  68 #define OMAP4_P2_MODE_TLL                               (1 << 18)
  69 #define OMAP4_P2_MODE_HSIC                              (3 << 18)
  70
  71 #define OMAP_UHH_DEBUG_CSR                              (0x44)
  72
  73 /* Values of UHH_REVISION - Note: these are not given in the TRM */
  74 #define OMAP_USBHS_REV1         0x00000010      /* OMAP3 */
  75 #define OMAP_USBHS_REV2         0x50700100      /* OMAP4 */
  76
  77 #define is_omap_usbhs_rev1(x)   (x->usbhs_rev == OMAP_USBHS_REV1)
  78 #define is_omap_usbhs_rev2(x)   (x->usbhs_rev == OMAP_USBHS_REV2)
  79
  80 #define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
  81 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
  82 #define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)
  83
  84
  85 struct usbhs_hcd_omap {
  86         int                             nports;
  87         struct clk                      **utmi_clk;
  88         struct clk                      **hsic60m_clk;
  89         struct clk                      **hsic480m_clk;
  90
  91         struct clk                      *xclk60mhsp1_ck;
  92         struct clk                      *xclk60mhsp2_ck;
  93         struct clk                      *utmi_p1_gfclk;
  94         struct clk                      *utmi_p2_gfclk;
  95         struct clk                      *init_60m_fclk;
  96         struct clk                      *ehci_logic_fck;
  97
  98         void __iomem                    *uhh_base;
  99
 100         struct usbhs_omap_platform_data *pdata;
 101
 102         u32                             usbhs_rev;
 103 };
 104 /*-------------------------------------------------------------------------*/
 105
 106 static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
 107 static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 108
 109 /*-------------------------------------------------------------------------*/
 110
 111 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
 112 {
 113         writel_relaxed(val, base + reg);
 114 }
 115
 116 static inline u32 usbhs_read(void __iomem *base, u32 reg)
 117 {
 118         return readl_relaxed(base + reg);
 119 }
 120
 121 /*-------------------------------------------------------------------------*/
 122
 123 /*
 124  * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
 125  * to the device tree binding portN-mode found in
 126  * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
 127  */
 128 static const char * const port_modes[] = {
 129         [OMAP_USBHS_PORT_MODE_UNUSED]   = "",
 130         [OMAP_EHCI_PORT_MODE_PHY]       = "ehci-phy",
 131         [OMAP_EHCI_PORT_MODE_TLL]       = "ehci-tll",
 132         [OMAP_EHCI_PORT_MODE_HSIC]      = "ehci-hsic",
 133         [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]   = "ohci-phy-6pin-datse0",
 134         [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]     = "ohci-phy-6pin-dpdm",
 135         [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]   = "ohci-phy-3pin-datse0",
 136         [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]     = "ohci-phy-4pin-dpdm",
 137         [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]   = "ohci-tll-6pin-datse0",
 138         [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]     = "ohci-tll-6pin-dpdm",
 139         [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]   = "ohci-tll-3pin-datse0",
 140         [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]     = "ohci-tll-4pin-dpdm",
 141         [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]   = "ohci-tll-2pin-datse0",
 142         [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]     = "ohci-tll-2pin-dpdm",
 143 };
 144
 145 static struct platform_device *omap_usbhs_alloc_child(const char *name,
 146                         struct resource *res, int num_resources, void *pdata,
 147                         size_t pdata_size, struct device *dev)
 148 {
 149         struct platform_device  *child;
 150         int                     ret;
 151
 152         child = platform_device_alloc(name, 0);
 153
 154         if (!child) {
 155                 dev_err(dev, "platform_device_alloc %s failed\n", name);
 156                 goto err_end;
 157         }
 158
 159         ret = platform_device_add_resources(child, res, num_resources);
 160         if (ret) {
 161                 dev_err(dev, "platform_device_add_resources failed\n");
 162                 goto err_alloc;
 163         }
 164
 165         ret = platform_device_add_data(child, pdata, pdata_size);
 166         if (ret) {
 167                 dev_err(dev, "platform_device_add_data failed\n");
 168                 goto err_alloc;
 169         }
 170
 171         child->dev.dma_mask             = &usbhs_dmamask;
 172         dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
 173         child->dev.parent               = dev;
 174
 175         ret = platform_device_add(child);
 176         if (ret) {
 177                 dev_err(dev, "platform_device_add failed\n");
 178                 goto err_alloc;
 179         }
 180
 181         return child;
 182
 183 err_alloc:
 184         platform_device_put(child);
 185
 186 err_end:
 187         return NULL;
 188 }
 189
 190 static int omap_usbhs_alloc_children(struct platform_device *pdev)
 191 {
 192         struct device                           *dev = &pdev->dev;
 193         struct usbhs_omap_platform_data         *pdata = dev_get_platdata(dev);
 194         struct platform_device                  *ehci;
 195         struct platform_device                  *ohci;
 196         struct resource                         *res;
 197         struct resource                         resources[2];
 198         int                                     ret;
 199
 200         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
 201         if (!res) {
 202                 dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
 203                 ret = -ENODEV;
 204                 goto err_end;
 205         }
 206         resources[0] = *res;
 207
 208         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
 209         if (!res) {
 210                 dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
 211                 ret = -ENODEV;
 212                 goto err_end;
 213         }
 214         resources[1] = *res;
 215
 216         ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
 217                 sizeof(*pdata), dev);
 218
 219         if (!ehci) {
 220                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
 221                 ret = -ENOMEM;
 222                 goto err_end;
 223         }
 224
 225         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
 226         if (!res) {
 227                 dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
 228                 ret = -ENODEV;
 229                 goto err_ehci;
 230         }
 231         resources[0] = *res;
 232
 233         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
 234         if (!res) {
 235                 dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
 236                 ret = -ENODEV;
 237                 goto err_ehci;
 238         }
 239         resources[1] = *res;
 240
 241         ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
 242                 sizeof(*pdata), dev);
 243         if (!ohci) {
 244                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
 245                 ret = -ENOMEM;
 246                 goto err_ehci;
 247         }
 248
 249         return 0;
 250
 251 err_ehci:
 252         platform_device_unregister(ehci);
 253
 254 err_end:
 255         return ret;
 256 }
 257
 258 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 259 {
 260         switch (pmode) {
 261         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 262         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 263         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 264         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 265         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 266         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 267         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 268         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 269         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 270         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 271                 return true;
 272
 273         default:
 274                 return false;
 275         }
 276 }
 277
 278 static int usbhs_runtime_resume(struct device *dev)
 279 {
 280         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 281         struct usbhs_omap_platform_data *pdata = omap->pdata;
 282         int i, r;
 283
 284         dev_dbg(dev, "usbhs_runtime_resume\n");
 285
 286         omap_tll_enable(pdata);
 287
 288         if (!IS_ERR(omap->ehci_logic_fck))
 289                 clk_prepare_enable(omap->ehci_logic_fck);
 290
 291         for (i = 0; i < omap->nports; i++) {
 292                 switch (pdata->port_mode[i]) {
 293                 case OMAP_EHCI_PORT_MODE_HSIC:
 294                         if (!IS_ERR(omap->hsic60m_clk[i])) {
 295                                 r = clk_prepare_enable(omap->hsic60m_clk[i]);
 296                                 if (r) {
 297                                         dev_err(dev,
 298                                          "Can't enable port %d hsic60m clk:%d\n",
 299                                          i, r);
 300                                 }
 301                         }
 302
 303                         if (!IS_ERR(omap->hsic480m_clk[i])) {
 304                                 r = clk_prepare_enable(omap->hsic480m_clk[i]);
 305                                 if (r) {
 306                                         dev_err(dev,
 307                                          "Can't enable port %d hsic480m clk:%d\n",
 308                                          i, r);
 309                                 }
 310                         }
 311                         fallthrough;    /* as HSIC mode needs utmi_clk */
 312
 313                 case OMAP_EHCI_PORT_MODE_TLL:
 314                         if (!IS_ERR(omap->utmi_clk[i])) {
 315                                 r = clk_prepare_enable(omap->utmi_clk[i]);
 316                                 if (r) {
 317                                         dev_err(dev,
 318                                          "Can't enable port %d clk : %d\n",
 319                                          i, r);
 320                                 }
 321                         }
 322                         break;
 323                 default:
 324                         break;
 325                 }
 326         }
 327
 328         return 0;
 329 }
 330
 331 static int usbhs_runtime_suspend(struct device *dev)
 332 {
 333         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 334         struct usbhs_omap_platform_data *pdata = omap->pdata;
 335         int i;
 336
 337         dev_dbg(dev, "usbhs_runtime_suspend\n");
 338
 339         for (i = 0; i < omap->nports; i++) {
 340                 switch (pdata->port_mode[i]) {
 341                 case OMAP_EHCI_PORT_MODE_HSIC:
 342                         if (!IS_ERR(omap->hsic60m_clk[i]))
 343                                 clk_disable_unprepare(omap->hsic60m_clk[i]);
 344
 345                         if (!IS_ERR(omap->hsic480m_clk[i]))
 346                                 clk_disable_unprepare(omap->hsic480m_clk[i]);
 347                         fallthrough;    /* as utmi_clks were used in HSIC mode */
 348
 349                 case OMAP_EHCI_PORT_MODE_TLL:
 350                         if (!IS_ERR(omap->utmi_clk[i]))
 351                                 clk_disable_unprepare(omap->utmi_clk[i]);
 352                         break;
 353                 default:
 354                         break;
 355                 }
 356         }
 357
 358         if (!IS_ERR(omap->ehci_logic_fck))
 359                 clk_disable_unprepare(omap->ehci_logic_fck);
 360
 361         omap_tll_disable(pdata);
 362
 363         return 0;
 364 }
 365
 366 static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
 367                                                 unsigned reg)
 368 {
 369         struct usbhs_omap_platform_data *pdata = omap->pdata;
 370         int i;
 371
 372         for (i = 0; i < omap->nports; i++) {
 373                 switch (pdata->port_mode[i]) {
 374                 case OMAP_USBHS_PORT_MODE_UNUSED:
 375                         reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
 376                         break;
 377                 case OMAP_EHCI_PORT_MODE_PHY:
 378                         if (pdata->single_ulpi_bypass)
 379                                 break;
 380
 381                         if (i == 0)
 382                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 383                         else
 384                                 reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
 385                                                                 << (i-1));
 386                         break;
 387                 default:
 388                         if (pdata->single_ulpi_bypass)
 389                                 break;
 390
 391                         if (i == 0)
 392                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 393                         else
 394                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
 395                                                                 << (i-1);
 396                         break;
 397                 }
 398         }
 399
 400         if (pdata->single_ulpi_bypass) {
 401                 /* bypass ULPI only if none of the ports use PHY mode */
 402                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 403
 404                 for (i = 0; i < omap->nports; i++) {
 405                         if (is_ehci_phy_mode(pdata->port_mode[i])) {
 406                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 407                                 break;
 408                         }
 409                 }
 410         }
 411
 412         return reg;
 413 }
 414
 415 static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
 416                                                 unsigned reg)
 417 {
 418         struct usbhs_omap_platform_data *pdata = omap->pdata;
 419         int i;
 420
 421         for (i = 0; i < omap->nports; i++) {
 422                 /* Clear port mode fields for PHY mode */
 423                 reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
 424
 425                 if (is_ehci_tll_mode(pdata->port_mode[i]) ||
 426                                 (is_ohci_port(pdata->port_mode[i])))
 427                         reg |= OMAP4_P1_MODE_TLL << 2 * i;
 428                 else if (is_ehci_hsic_mode(pdata->port_mode[i]))
 429                         reg |= OMAP4_P1_MODE_HSIC << 2 * i;
 430         }
 431
 432         return reg;
 433 }
 434
 435 static void omap_usbhs_init(struct device *dev)
 436 {
 437         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 438         unsigned                        reg;
 439
 440         dev_dbg(dev, "starting TI HSUSB Controller\n");
 441
 442         pm_runtime_get_sync(dev);
 443
 444         reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
 445         /* setup ULPI bypass and burst configurations */
 446         reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
 447                         | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
 448                         | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
 449         reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
 450         reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 451
 452         switch (omap->usbhs_rev) {
 453         case OMAP_USBHS_REV1:
 454                 reg = omap_usbhs_rev1_hostconfig(omap, reg);
 455                 break;
 456
 457         case OMAP_USBHS_REV2:
 458                 reg = omap_usbhs_rev2_hostconfig(omap, reg);
 459                 break;
 460
 461         default:        /* newer revisions */
 462                 reg = omap_usbhs_rev2_hostconfig(omap, reg);
 463                 break;
 464         }
 465
 466         usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 467         dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 468
 469         pm_runtime_put_sync(dev);
 470 }
 471
 472 static int usbhs_omap_get_dt_pdata(struct device *dev,
 473                                         struct usbhs_omap_platform_data *pdata)
 474 {
 475         int ret, i;
 476         struct device_node *node = dev->of_node;
 477
 478         ret = of_property_read_u32(node, "num-ports", &pdata->nports);
 479         if (ret)
 480                 pdata->nports = 0;
 481
 482         if (pdata->nports > OMAP3_HS_USB_PORTS) {
 483                 dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
 484                                 pdata->nports, OMAP3_HS_USB_PORTS);
 485                 return -ENODEV;
 486         }
 487
 488         /* get port modes */
 489         for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 490                 char prop[11];
 491                 const char *mode;
 492
 493                 pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
 494
 495                 snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
 496                 ret = of_property_read_string(node, prop, &mode);
 497                 if (ret < 0)
 498                         continue;
 499
 500                 /* get 'enum usbhs_omap_port_mode' from port mode string */
 501                 ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode);
 502                 if (ret < 0) {
 503                         dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
 504                                         i, mode);
 505                         return -ENODEV;
 506                 }
 507
 508                 dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
 509                 pdata->port_mode[i] = ret;
 510         }
 511
 512         /* get flags */
 513         pdata->single_ulpi_bypass = of_property_read_bool(node,
 514                                                 "single-ulpi-bypass");
 515
 516         return 0;
 517 }
 518
 519 static const struct of_device_id usbhs_child_match_table[] = {
 520         { .compatible = "ti,ehci-omap", },
 521         { .compatible = "ti,ohci-omap3", },
 522         { }
 523 };
 524
 525 /**
 526  * usbhs_omap_probe - initialize TI-based HCDs
 527  *
 528  * Allocates basic resources for this USB host controller.
 529  *
 530  * @pdev: Pointer to this device's platform device structure
 531  */
 532 static int usbhs_omap_probe(struct platform_device *pdev)
 533 {
 534         struct device                   *dev =  &pdev->dev;
 535         struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
 536         struct usbhs_hcd_omap           *omap;
 537         struct resource                 *res;
 538         int                             ret = 0;
 539         int                             i;
 540         bool                            need_logic_fck;
 541
 542         if (dev->of_node) {
 543                 /* For DT boot we populate platform data from OF node */
 544                 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 545                 if (!pdata)
 546                         return -ENOMEM;
 547
 548                 ret = usbhs_omap_get_dt_pdata(dev, pdata);
 549                 if (ret)
 550                         return ret;
 551
 552                 dev->platform_data = pdata;
 553         }
 554
 555         if (!pdata) {
 556                 dev_err(dev, "Missing platform data\n");
 557                 return -ENODEV;
 558         }
 559
 560         if (pdata->nports > OMAP3_HS_USB_PORTS) {
 561                 dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
 562                                 pdata->nports, OMAP3_HS_USB_PORTS);
 563                 return -ENODEV;
 564         }
 565
 566         omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 567         if (!omap) {
 568                 dev_err(dev, "Memory allocation failed\n");
 569                 return -ENOMEM;
 570         }
 571
 572         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 573         omap->uhh_base = devm_ioremap_resource(dev, res);
 574         if (IS_ERR(omap->uhh_base))
 575                 return PTR_ERR(omap->uhh_base);
 576
 577         omap->pdata = pdata;
 578
 579         /* Initialize the TLL subsystem */
 580         omap_tll_init(pdata);
 581
 582         pm_runtime_enable(dev);
 583
 584         platform_set_drvdata(pdev, omap);
 585         pm_runtime_get_sync(dev);
 586
 587         omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
 588
 589         /* we need to call runtime suspend before we update omap->nports
 590          * to prevent unbalanced clk_disable()
 591          */
 592         pm_runtime_put_sync(dev);
 593
 594         /*
 595          * If platform data contains nports then use that
 596          * else make out number of ports from USBHS revision
 597          */
 598         if (pdata->nports) {
 599                 omap->nports = pdata->nports;
 600         } else {
 601                 switch (omap->usbhs_rev) {
 602                 case OMAP_USBHS_REV1:
 603                         omap->nports = 3;
 604                         break;
 605                 case OMAP_USBHS_REV2:
 606                         omap->nports = 2;
 607                         break;
 608                 default:
 609                         omap->nports = OMAP3_HS_USB_PORTS;
 610                         dev_dbg(dev,
 611                          "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
 612                          omap->usbhs_rev, omap->nports);
 613                         break;
 614                 }
 615                 pdata->nports = omap->nports;
 616         }
 617
 618         i = sizeof(struct clk *) * omap->nports;
 619         omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 620         omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 621         omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 622
 623         if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
 624                 dev_err(dev, "Memory allocation failed\n");
 625                 ret = -ENOMEM;
 626                 goto err_mem;
 627         }
 628
 629         /* Set all clocks as invalid to begin with */
 630         omap->ehci_logic_fck = ERR_PTR(-ENODEV);
 631         omap->init_60m_fclk = ERR_PTR(-ENODEV);
 632         omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
 633         omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
 634         omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
 635         omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
 636
 637         for (i = 0; i < omap->nports; i++) {
 638                 omap->utmi_clk[i] = ERR_PTR(-ENODEV);
 639                 omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
 640                 omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
 641         }
 642
 643         /* for OMAP3 i.e. USBHS REV1 */
 644         if (omap->usbhs_rev == OMAP_USBHS_REV1) {
 645                 need_logic_fck = false;
 646                 for (i = 0; i < omap->nports; i++) {
 647                         if (is_ehci_phy_mode(pdata->port_mode[i]) ||
 648                             is_ehci_tll_mode(pdata->port_mode[i]) ||
 649                             is_ehci_hsic_mode(pdata->port_mode[i]))
 650
 651                                 need_logic_fck |= true;
 652                 }
 653
 654                 if (need_logic_fck) {
 655                         omap->ehci_logic_fck = devm_clk_get(dev,
 656                                                             "usbhost_120m_fck");
 657                         if (IS_ERR(omap->ehci_logic_fck)) {
 658                                 ret = PTR_ERR(omap->ehci_logic_fck);
 659                                 dev_err(dev, "usbhost_120m_fck failed:%d\n",
 660                                         ret);
 661                                 goto err_mem;
 662                         }
 663                 }
 664                 goto initialize;
 665         }
 666
 667         /* for OMAP4+ i.e. USBHS REV2+ */
 668         omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
 669         if (IS_ERR(omap->utmi_p1_gfclk)) {
 670                 ret = PTR_ERR(omap->utmi_p1_gfclk);
 671                 dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
 672                 goto err_mem;
 673         }
 674
 675         omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
 676         if (IS_ERR(omap->utmi_p2_gfclk)) {
 677                 ret = PTR_ERR(omap->utmi_p2_gfclk);
 678                 dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
 679                 goto err_mem;
 680         }
 681
 682         omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
 683         if (IS_ERR(omap->xclk60mhsp1_ck)) {
 684                 ret = PTR_ERR(omap->xclk60mhsp1_ck);
 685                 dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
 686                 goto err_mem;
 687         }
 688
 689         omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
 690         if (IS_ERR(omap->xclk60mhsp2_ck)) {
 691                 ret = PTR_ERR(omap->xclk60mhsp2_ck);
 692                 dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
 693                 goto err_mem;
 694         }
 695
 696         omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
 697         if (IS_ERR(omap->init_60m_fclk)) {
 698                 ret = PTR_ERR(omap->init_60m_fclk);
 699                 dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
 700                 goto err_mem;
 701         }
 702
 703         for (i = 0; i < omap->nports; i++) {
 704                 char clkname[30];
 705
 706                 /* clock names are indexed from 1*/
 707                 snprintf(clkname, sizeof(clkname),
 708                                 "usb_host_hs_utmi_p%d_clk", i + 1);
 709
 710                 /* If a clock is not found we won't bail out as not all
 711                  * platforms have all clocks and we can function without
 712                  * them
 713                  */
 714                 omap->utmi_clk[i] = devm_clk_get(dev, clkname);
 715                 if (IS_ERR(omap->utmi_clk[i])) {
 716                         ret = PTR_ERR(omap->utmi_clk[i]);
 717                         dev_err(dev, "Failed to get clock : %s : %d\n",
 718                                 clkname, ret);
 719                         goto err_mem;
 720                 }
 721
 722                 snprintf(clkname, sizeof(clkname),
 723                                 "usb_host_hs_hsic480m_p%d_clk", i + 1);
 724                 omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
 725                 if (IS_ERR(omap->hsic480m_clk[i])) {
 726                         ret = PTR_ERR(omap->hsic480m_clk[i]);
 727                         dev_err(dev, "Failed to get clock : %s : %d\n",
 728                                 clkname, ret);
 729                         goto err_mem;
 730                 }
 731
 732                 snprintf(clkname, sizeof(clkname),
 733                                 "usb_host_hs_hsic60m_p%d_clk", i + 1);
 734                 omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
 735                 if (IS_ERR(omap->hsic60m_clk[i])) {
 736                         ret = PTR_ERR(omap->hsic60m_clk[i]);
 737                         dev_err(dev, "Failed to get clock : %s : %d\n",
 738                                 clkname, ret);
 739                         goto err_mem;
 740                 }
 741         }
 742
 743         if (is_ehci_phy_mode(pdata->port_mode[0])) {
 744                 ret = clk_set_parent(omap->utmi_p1_gfclk,
 745                                         omap->xclk60mhsp1_ck);
 746                 if (ret != 0) {
 747                         dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
 748                                 ret);
 749                         goto err_mem;
 750                 }
 751         } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
 752                 ret = clk_set_parent(omap->utmi_p1_gfclk,
 753                                         omap->init_60m_fclk);
 754                 if (ret != 0) {
 755                         dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
 756                                 ret);
 757                         goto err_mem;
 758                 }
 759         }
 760
 761         if (is_ehci_phy_mode(pdata->port_mode[1])) {
 762                 ret = clk_set_parent(omap->utmi_p2_gfclk,
 763                                         omap->xclk60mhsp2_ck);
 764                 if (ret != 0) {
 765                         dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
 766                                 ret);
 767                         goto err_mem;
 768                 }
 769         } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
 770                 ret = clk_set_parent(omap->utmi_p2_gfclk,
 771                                                 omap->init_60m_fclk);
 772                 if (ret != 0) {
 773                         dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
 774                                 ret);
 775                         goto err_mem;
 776                 }
 777         }
 778
 779 initialize:
 780         omap_usbhs_init(dev);
 781
 782         if (dev->of_node) {
 783                 ret = of_platform_populate(dev->of_node,
 784                                 usbhs_child_match_table, NULL, dev);
 785
 786                 if (ret) {
 787                         dev_err(dev, "Failed to create DT children: %d\n", ret);
 788                         goto err_mem;
 789                 }
 790
 791         } else {
 792                 ret = omap_usbhs_alloc_children(pdev);
 793                 if (ret) {
 794                         dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
 795                                                 ret);
 796                         goto err_mem;
 797                 }
 798         }
 799
 800         return 0;
 801
 802 err_mem:
 803         pm_runtime_disable(dev);
 804
 805         return ret;
 806 }
 807
 808 static int usbhs_omap_remove_child(struct device *dev, void *data)
 809 {
 810         dev_info(dev, "unregistering\n");
 811         platform_device_unregister(to_platform_device(dev));
 812         return 0;
 813 }
 814
 815 /**
 816  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
 817  * @pdev: USB Host Controller being removed
 818  *
 819  * Reverses the effect of usbhs_omap_probe().
 820  */
 821 static int usbhs_omap_remove(struct platform_device *pdev)
 822 {
 823         pm_runtime_disable(&pdev->dev);
 824
 825         /* remove children */
 826         device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
 827         return 0;
 828 }
 829
 830 static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
 831         .runtime_suspend        = usbhs_runtime_suspend,
 832         .runtime_resume         = usbhs_runtime_resume,
 833 };
 834
 835 static const struct of_device_id usbhs_omap_dt_ids[] = {
 836         { .compatible = "ti,usbhs-host" },
 837         { }
 838 };
 839
 840 MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
 841
 842
 843 static struct platform_driver usbhs_omap_driver = {
 844         .driver = {
 845                 .name           = usbhs_driver_name,
 846                 .pm             = &usbhsomap_dev_pm_ops,
 847                 .of_match_table = usbhs_omap_dt_ids,
 848         },
 849         .probe          = usbhs_omap_probe,
 850         .remove         = usbhs_omap_remove,
 851 };
 852
 853 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
 854 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 855 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
 856 MODULE_LICENSE("GPL v2");
 857 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
 858
 859 static int omap_usbhs_drvinit(void)
 860 {
 861         return platform_driver_register(&usbhs_omap_driver);
 862 }
 863
 864 /*
 865  * init before ehci and ohci drivers;
 866  * The usbhs core driver should be initialized much before
 867  * the omap ehci and ohci probe functions are called.
 868  * This usbhs core driver should be initialized after
 869  * usb tll driver
 870  */
 871 fs_initcall_sync(omap_usbhs_drvinit);
 872
 873 static void omap_usbhs_drvexit(void)
 874 {
 875         platform_driver_unregister(&usbhs_omap_driver);
 876 }
 877 module_exit(omap_usbhs_drvexit);