drivers/mfd/iqs62x.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
   4  *
   5  * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
   6  *
   7  * These devices rely on application-specific register settings and calibration
   8  * data developed in and exported from a suite of GUIs offered by the vendor. A
   9  * separate tool converts the GUIs' ASCII-based output into a standard firmware
  10  * file parsed by the driver.
  11  *
  12  * Link to datasheets and GUIs: https://www.azoteq.com/
  13  *
  14  * Link to conversion tool: https://github.com/jlabundy/iqs62x-h2bin.git
  15  */
  16
  17 #include <linux/completion.h>
  18 #include <linux/delay.h>
  19 #include <linux/device.h>
  20 #include <linux/err.h>
  21 #include <linux/firmware.h>
  22 #include <linux/i2c.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/kernel.h>
  25 #include <linux/list.h>
  26 #include <linux/mfd/core.h>
  27 #include <linux/mfd/iqs62x.h>
  28 #include <linux/module.h>
  29 #include <linux/notifier.h>
  30 #include <linux/of_device.h>
  31 #include <linux/property.h>
  32 #include <linux/regmap.h>
  33 #include <linux/slab.h>
  34 #include <asm/unaligned.h>
  35
  36 #define IQS62X_PROD_NUM                         0x00
  37
  38 #define IQS62X_SYS_FLAGS                        0x10
  39
  40 #define IQS620_HALL_FLAGS                       0x16
  41 #define IQS621_HALL_FLAGS                       0x19
  42 #define IQS622_HALL_FLAGS                       IQS621_HALL_FLAGS
  43
  44 #define IQS624_INTERVAL_NUM                     0x18
  45 #define IQS625_INTERVAL_NUM                     0x12
  46
  47 #define IQS622_PROX_SETTINGS_4                  0x48
  48 #define IQS620_PROX_SETTINGS_4                  0x50
  49 #define IQS620_PROX_SETTINGS_4_SAR_EN           BIT(7)
  50
  51 #define IQS621_ALS_CAL_DIV_LUX                  0x82
  52 #define IQS621_ALS_CAL_DIV_IR                   0x83
  53
  54 #define IQS620_TEMP_CAL_MULT                    0xC2
  55 #define IQS620_TEMP_CAL_DIV                     0xC3
  56 #define IQS620_TEMP_CAL_OFFS                    0xC4
  57
  58 #define IQS62X_SYS_SETTINGS                     0xD0
  59 #define IQS62X_SYS_SETTINGS_ACK_RESET           BIT(6)
  60 #define IQS62X_SYS_SETTINGS_EVENT_MODE          BIT(5)
  61 #define IQS62X_SYS_SETTINGS_CLK_DIV             BIT(4)
  62 #define IQS62X_SYS_SETTINGS_COMM_ATI            BIT(3)
  63 #define IQS62X_SYS_SETTINGS_REDO_ATI            BIT(1)
  64
  65 #define IQS62X_PWR_SETTINGS                     0xD2
  66 #define IQS62X_PWR_SETTINGS_DIS_AUTO            BIT(5)
  67 #define IQS62X_PWR_SETTINGS_PWR_MODE_MASK       (BIT(4) | BIT(3))
  68 #define IQS62X_PWR_SETTINGS_PWR_MODE_HALT       (BIT(4) | BIT(3))
  69 #define IQS62X_PWR_SETTINGS_PWR_MODE_NORM       0
  70
  71 #define IQS62X_OTP_CMD                          0xF0
  72 #define IQS62X_OTP_CMD_FG3                      0x13
  73 #define IQS62X_OTP_DATA                         0xF1
  74 #define IQS62X_MAX_REG                          0xFF
  75
  76 #define IQS62X_HALL_CAL_MASK                    GENMASK(3, 0)
  77
  78 #define IQS62X_FW_REC_TYPE_INFO                 0
  79 #define IQS62X_FW_REC_TYPE_PROD                 1
  80 #define IQS62X_FW_REC_TYPE_HALL                 2
  81 #define IQS62X_FW_REC_TYPE_MASK                 3
  82 #define IQS62X_FW_REC_TYPE_DATA                 4
  83
  84 #define IQS62X_ATI_STARTUP_MS                   350
  85 #define IQS62X_FILT_SETTLE_MS                   250
  86
  87 struct iqs62x_fw_rec {
  88         u8 type;
  89         u8 addr;
  90         u8 len;
  91         u8 data;
  92 } __packed;
  93
  94 struct iqs62x_fw_blk {
  95         struct list_head list;
  96         u8 addr;
  97         u8 mask;
  98         u8 len;
  99         u8 data[];
 100 };
 101
 102 struct iqs62x_info {
 103         u8 prod_num;
 104         u8 sw_num;
 105         u8 hw_num;
 106 } __packed;
 107
 108 static int iqs62x_dev_init(struct iqs62x_core *iqs62x)
 109 {
 110         struct iqs62x_fw_blk *fw_blk;
 111         unsigned int val;
 112         int ret;
 113
 114         list_for_each_entry(fw_blk, &iqs62x->fw_blk_head, list) {
 115                 /*
 116                  * In case ATI is in progress, wait for it to complete before
 117                  * lowering the core clock frequency.
 118                  */
 119                 if (fw_blk->addr == IQS62X_SYS_SETTINGS &&
 120                     *fw_blk->data & IQS62X_SYS_SETTINGS_CLK_DIV)
 121                         msleep(IQS62X_ATI_STARTUP_MS);
 122
 123                 if (fw_blk->mask)
 124                         ret = regmap_update_bits(iqs62x->regmap, fw_blk->addr,
 125                                                  fw_blk->mask, *fw_blk->data);
 126                 else
 127                         ret = regmap_raw_write(iqs62x->regmap, fw_blk->addr,
 128                                                fw_blk->data, fw_blk->len);
 129                 if (ret)
 130                         return ret;
 131         }
 132
 133         switch (iqs62x->dev_desc->prod_num) {
 134         case IQS620_PROD_NUM:
 135         case IQS622_PROD_NUM:
 136                 ret = regmap_read(iqs62x->regmap,
 137                                   iqs62x->dev_desc->prox_settings, &val);
 138                 if (ret)
 139                         return ret;
 140
 141                 if (val & IQS620_PROX_SETTINGS_4_SAR_EN)
 142                         iqs62x->ui_sel = IQS62X_UI_SAR1;
 143                 fallthrough;
 144
 145         case IQS621_PROD_NUM:
 146                 ret = regmap_write(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
 147                                    IQS620_GLBL_EVENT_MASK_PMU |
 148                                    iqs62x->dev_desc->prox_mask |
 149                                    iqs62x->dev_desc->sar_mask |
 150                                    iqs62x->dev_desc->hall_mask |
 151                                    iqs62x->dev_desc->hyst_mask |
 152                                    iqs62x->dev_desc->temp_mask |
 153                                    iqs62x->dev_desc->als_mask |
 154                                    iqs62x->dev_desc->ir_mask);
 155                 if (ret)
 156                         return ret;
 157                 break;
 158
 159         default:
 160                 ret = regmap_write(iqs62x->regmap, IQS624_HALL_UI,
 161                                    IQS624_HALL_UI_WHL_EVENT |
 162                                    IQS624_HALL_UI_INT_EVENT |
 163                                    IQS624_HALL_UI_AUTO_CAL);
 164                 if (ret)
 165                         return ret;
 166
 167                 /*
 168                  * The IQS625 default interval divider is below the minimum
 169                  * permissible value, and the datasheet mandates that it is
 170                  * corrected during initialization (unless an updated value
 171                  * has already been provided by firmware).
 172                  *
 173                  * To protect against an unacceptably low user-entered value
 174                  * stored in the firmware, the same check is extended to the
 175                  * IQS624 as well.
 176                  */
 177                 ret = regmap_read(iqs62x->regmap, IQS624_INTERVAL_DIV, &val);
 178                 if (ret)
 179                         return ret;
 180
 181                 if (val >= iqs62x->dev_desc->interval_div)
 182                         break;
 183
 184                 ret = regmap_write(iqs62x->regmap, IQS624_INTERVAL_DIV,
 185                                    iqs62x->dev_desc->interval_div);
 186                 if (ret)
 187                         return ret;
 188         }
 189
 190         /*
 191          * Place the device in streaming mode at first so as not to miss the
 192          * limited number of interrupts that would otherwise occur after ATI
 193          * completes. The device is subsequently placed in event mode by the
 194          * interrupt handler.
 195          *
 196          * In the meantime, mask interrupts during ATI to prevent the device
 197          * from soliciting I2C traffic until the noise-sensitive ATI process
 198          * is complete.
 199          */
 200         ret = regmap_update_bits(iqs62x->regmap, IQS62X_SYS_SETTINGS,
 201                                  IQS62X_SYS_SETTINGS_ACK_RESET |
 202                                  IQS62X_SYS_SETTINGS_EVENT_MODE |
 203                                  IQS62X_SYS_SETTINGS_COMM_ATI |
 204                                  IQS62X_SYS_SETTINGS_REDO_ATI,
 205                                  IQS62X_SYS_SETTINGS_ACK_RESET |
 206                                  IQS62X_SYS_SETTINGS_REDO_ATI);
 207         if (ret)
 208                 return ret;
 209
 210         /*
 211          * The following delay gives the device time to deassert its RDY output
 212          * in case a communication window was open while the REDO_ATI field was
 213          * written. This prevents an interrupt from being serviced prematurely.
 214          */
 215         usleep_range(5000, 5100);
 216
 217         return 0;
 218 }
 219
 220 static int iqs62x_firmware_parse(struct iqs62x_core *iqs62x,
 221                                  const struct firmware *fw)
 222 {
 223         struct i2c_client *client = iqs62x->client;
 224         struct iqs62x_fw_rec *fw_rec;
 225         struct iqs62x_fw_blk *fw_blk;
 226         unsigned int val;
 227         size_t pos = 0;
 228         int ret = 0;
 229         u8 mask, len, *data;
 230         u8 hall_cal_index = 0;
 231
 232         while (pos < fw->size) {
 233                 if (pos + sizeof(*fw_rec) > fw->size) {
 234                         ret = -EINVAL;
 235                         break;
 236                 }
 237                 fw_rec = (struct iqs62x_fw_rec *)(fw->data + pos);
 238                 pos += sizeof(*fw_rec);
 239
 240                 if (pos + fw_rec->len - 1 > fw->size) {
 241                         ret = -EINVAL;
 242                         break;
 243                 }
 244                 pos += fw_rec->len - 1;
 245
 246                 switch (fw_rec->type) {
 247                 case IQS62X_FW_REC_TYPE_INFO:
 248                         continue;
 249
 250                 case IQS62X_FW_REC_TYPE_PROD:
 251                         if (fw_rec->data == iqs62x->dev_desc->prod_num)
 252                                 continue;
 253
 254                         dev_err(&client->dev,
 255                                 "Incompatible product number: 0x%02X\n",
 256                                 fw_rec->data);
 257                         ret = -EINVAL;
 258                         break;
 259
 260                 case IQS62X_FW_REC_TYPE_HALL:
 261                         if (!hall_cal_index) {
 262                                 ret = regmap_write(iqs62x->regmap,
 263                                                    IQS62X_OTP_CMD,
 264                                                    IQS62X_OTP_CMD_FG3);
 265                                 if (ret)
 266                                         break;
 267
 268                                 ret = regmap_read(iqs62x->regmap,
 269                                                   IQS62X_OTP_DATA, &val);
 270                                 if (ret)
 271                                         break;
 272
 273                                 hall_cal_index = val & IQS62X_HALL_CAL_MASK;
 274                                 if (!hall_cal_index) {
 275                                         dev_err(&client->dev,
 276                                                 "Uncalibrated device\n");
 277                                         ret = -ENODATA;
 278                                         break;
 279                                 }
 280                         }
 281
 282                         if (hall_cal_index > fw_rec->len) {
 283                                 ret = -EINVAL;
 284                                 break;
 285                         }
 286
 287                         mask = 0;
 288                         data = &fw_rec->data + hall_cal_index - 1;
 289                         len = sizeof(*data);
 290                         break;
 291
 292                 case IQS62X_FW_REC_TYPE_MASK:
 293                         if (fw_rec->len < (sizeof(mask) + sizeof(*data))) {
 294                                 ret = -EINVAL;
 295                                 break;
 296                         }
 297
 298                         mask = fw_rec->data;
 299                         data = &fw_rec->data + sizeof(mask);
 300                         len = sizeof(*data);
 301                         break;
 302
 303                 case IQS62X_FW_REC_TYPE_DATA:
 304                         mask = 0;
 305                         data = &fw_rec->data;
 306                         len = fw_rec->len;
 307                         break;
 308
 309                 default:
 310                         dev_err(&client->dev,
 311                                 "Unrecognized record type: 0x%02X\n",
 312                                 fw_rec->type);
 313                         ret = -EINVAL;
 314                 }
 315
 316                 if (ret)
 317                         break;
 318
 319                 fw_blk = devm_kzalloc(&client->dev,
 320                                       struct_size(fw_blk, data, len),
 321                                       GFP_KERNEL);
 322                 if (!fw_blk) {
 323                         ret = -ENOMEM;
 324                         break;
 325                 }
 326
 327                 fw_blk->addr = fw_rec->addr;
 328                 fw_blk->mask = mask;
 329                 fw_blk->len = len;
 330                 memcpy(fw_blk->data, data, len);
 331
 332                 list_add(&fw_blk->list, &iqs62x->fw_blk_head);
 333         }
 334
 335         release_firmware(fw);
 336
 337         return ret;
 338 }
 339
 340 const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS] = {
 341         [IQS62X_EVENT_PROX_CH0_T] = {
 342                 .reg    = IQS62X_EVENT_PROX,
 343                 .mask   = BIT(4),
 344                 .val    = BIT(4),
 345         },
 346         [IQS62X_EVENT_PROX_CH0_P] = {
 347                 .reg    = IQS62X_EVENT_PROX,
 348                 .mask   = BIT(0),
 349                 .val    = BIT(0),
 350         },
 351         [IQS62X_EVENT_PROX_CH1_T] = {
 352                 .reg    = IQS62X_EVENT_PROX,
 353                 .mask   = BIT(5),
 354                 .val    = BIT(5),
 355         },
 356         [IQS62X_EVENT_PROX_CH1_P] = {
 357                 .reg    = IQS62X_EVENT_PROX,
 358                 .mask   = BIT(1),
 359                 .val    = BIT(1),
 360         },
 361         [IQS62X_EVENT_PROX_CH2_T] = {
 362                 .reg    = IQS62X_EVENT_PROX,
 363                 .mask   = BIT(6),
 364                 .val    = BIT(6),
 365         },
 366         [IQS62X_EVENT_PROX_CH2_P] = {
 367                 .reg    = IQS62X_EVENT_PROX,
 368                 .mask   = BIT(2),
 369                 .val    = BIT(2),
 370         },
 371         [IQS62X_EVENT_HYST_POS_T] = {
 372                 .reg    = IQS62X_EVENT_HYST,
 373                 .mask   = BIT(6) | BIT(7),
 374                 .val    = BIT(6),
 375         },
 376         [IQS62X_EVENT_HYST_POS_P] = {
 377                 .reg    = IQS62X_EVENT_HYST,
 378                 .mask   = BIT(5) | BIT(7),
 379                 .val    = BIT(5),
 380         },
 381         [IQS62X_EVENT_HYST_NEG_T] = {
 382                 .reg    = IQS62X_EVENT_HYST,
 383                 .mask   = BIT(6) | BIT(7),
 384                 .val    = BIT(6) | BIT(7),
 385         },
 386         [IQS62X_EVENT_HYST_NEG_P] = {
 387                 .reg    = IQS62X_EVENT_HYST,
 388                 .mask   = BIT(5) | BIT(7),
 389                 .val    = BIT(5) | BIT(7),
 390         },
 391         [IQS62X_EVENT_SAR1_ACT] = {
 392                 .reg    = IQS62X_EVENT_HYST,
 393                 .mask   = BIT(4),
 394                 .val    = BIT(4),
 395         },
 396         [IQS62X_EVENT_SAR1_QRD] = {
 397                 .reg    = IQS62X_EVENT_HYST,
 398                 .mask   = BIT(2),
 399                 .val    = BIT(2),
 400         },
 401         [IQS62X_EVENT_SAR1_MOVE] = {
 402                 .reg    = IQS62X_EVENT_HYST,
 403                 .mask   = BIT(1),
 404                 .val    = BIT(1),
 405         },
 406         [IQS62X_EVENT_SAR1_HALT] = {
 407                 .reg    = IQS62X_EVENT_HYST,
 408                 .mask   = BIT(0),
 409                 .val    = BIT(0),
 410         },
 411         [IQS62X_EVENT_WHEEL_UP] = {
 412                 .reg    = IQS62X_EVENT_WHEEL,
 413                 .mask   = BIT(7) | BIT(6),
 414                 .val    = BIT(7),
 415         },
 416         [IQS62X_EVENT_WHEEL_DN] = {
 417                 .reg    = IQS62X_EVENT_WHEEL,
 418                 .mask   = BIT(7) | BIT(6),
 419                 .val    = BIT(7) | BIT(6),
 420         },
 421         [IQS62X_EVENT_HALL_N_T] = {
 422                 .reg    = IQS62X_EVENT_HALL,
 423                 .mask   = BIT(2) | BIT(0),
 424                 .val    = BIT(2),
 425         },
 426         [IQS62X_EVENT_HALL_N_P] = {
 427                 .reg    = IQS62X_EVENT_HALL,
 428                 .mask   = BIT(1) | BIT(0),
 429                 .val    = BIT(1),
 430         },
 431         [IQS62X_EVENT_HALL_S_T] = {
 432                 .reg    = IQS62X_EVENT_HALL,
 433                 .mask   = BIT(2) | BIT(0),
 434                 .val    = BIT(2) | BIT(0),
 435         },
 436         [IQS62X_EVENT_HALL_S_P] = {
 437                 .reg    = IQS62X_EVENT_HALL,
 438                 .mask   = BIT(1) | BIT(0),
 439                 .val    = BIT(1) | BIT(0),
 440         },
 441         [IQS62X_EVENT_SYS_RESET] = {
 442                 .reg    = IQS62X_EVENT_SYS,
 443                 .mask   = BIT(7),
 444                 .val    = BIT(7),
 445         },
 446         [IQS62X_EVENT_SYS_ATI] = {
 447                 .reg    = IQS62X_EVENT_SYS,
 448                 .mask   = BIT(2),
 449                 .val    = BIT(2),
 450         },
 451 };
 452 EXPORT_SYMBOL_GPL(iqs62x_events);
 453
 454 static irqreturn_t iqs62x_irq(int irq, void *context)
 455 {
 456         struct iqs62x_core *iqs62x = context;
 457         struct i2c_client *client = iqs62x->client;
 458         struct iqs62x_event_data event_data;
 459         struct iqs62x_event_desc event_desc;
 460         enum iqs62x_event_reg event_reg;
 461         unsigned long event_flags = 0;
 462         int ret, i, j;
 463         u8 event_map[IQS62X_EVENT_SIZE];
 464
 465         /*
 466          * The device asserts the RDY output to signal the beginning of a
 467          * communication window, which is closed by an I2C stop condition.
 468          * As such, all interrupt status is captured in a single read and
 469          * broadcast to any interested sub-device drivers.
 470          */
 471         ret = regmap_raw_read(iqs62x->regmap, IQS62X_SYS_FLAGS, event_map,
 472                               sizeof(event_map));
 473         if (ret) {
 474                 dev_err(&client->dev, "Failed to read device status: %d\n",
 475                         ret);
 476                 return IRQ_NONE;
 477         }
 478
 479         for (i = 0; i < sizeof(event_map); i++) {
 480                 event_reg = iqs62x->dev_desc->event_regs[iqs62x->ui_sel][i];
 481
 482                 switch (event_reg) {
 483                 case IQS62X_EVENT_UI_LO:
 484                         event_data.ui_data = get_unaligned_le16(&event_map[i]);
 485                         fallthrough;
 486
 487                 case IQS62X_EVENT_UI_HI:
 488                 case IQS62X_EVENT_NONE:
 489                         continue;
 490
 491                 case IQS62X_EVENT_ALS:
 492                         event_data.als_flags = event_map[i];
 493                         continue;
 494
 495                 case IQS62X_EVENT_IR:
 496                         event_data.ir_flags = event_map[i];
 497                         continue;
 498
 499                 case IQS62X_EVENT_INTER:
 500                         event_data.interval = event_map[i];
 501                         continue;
 502
 503                 case IQS62X_EVENT_HYST:
 504                         event_map[i] <<= iqs62x->dev_desc->hyst_shift;
 505                         fallthrough;
 506
 507                 case IQS62X_EVENT_WHEEL:
 508                 case IQS62X_EVENT_HALL:
 509                 case IQS62X_EVENT_PROX:
 510                 case IQS62X_EVENT_SYS:
 511                         break;
 512                 }
 513
 514                 for (j = 0; j < IQS62X_NUM_EVENTS; j++) {
 515                         event_desc = iqs62x_events[j];
 516
 517                         if (event_desc.reg != event_reg)
 518                                 continue;
 519
 520                         if ((event_map[i] & event_desc.mask) == event_desc.val)
 521                                 event_flags |= BIT(j);
 522                 }
 523         }
 524
 525         /*
 526          * The device resets itself in response to the I2C master stalling
 527          * communication past a fixed timeout. In this case, all registers
 528          * are restored and any interested sub-device drivers are notified.
 529          */
 530         if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
 531                 dev_err(&client->dev, "Unexpected device reset\n");
 532
 533                 ret = iqs62x_dev_init(iqs62x);
 534                 if (ret) {
 535                         dev_err(&client->dev,
 536                                 "Failed to re-initialize device: %d\n", ret);
 537                         return IRQ_NONE;
 538                 }
 539
 540                 iqs62x->event_cache |= BIT(IQS62X_EVENT_SYS_RESET);
 541                 reinit_completion(&iqs62x->ati_done);
 542         } else if (event_flags & BIT(IQS62X_EVENT_SYS_ATI)) {
 543                 iqs62x->event_cache |= BIT(IQS62X_EVENT_SYS_ATI);
 544                 reinit_completion(&iqs62x->ati_done);
 545         } else if (!completion_done(&iqs62x->ati_done)) {
 546                 ret = regmap_update_bits(iqs62x->regmap, IQS62X_SYS_SETTINGS,
 547                                          IQS62X_SYS_SETTINGS_EVENT_MODE, 0xFF);
 548                 if (ret) {
 549                         dev_err(&client->dev,
 550                                 "Failed to enable event mode: %d\n", ret);
 551                         return IRQ_NONE;
 552                 }
 553
 554                 msleep(IQS62X_FILT_SETTLE_MS);
 555                 complete_all(&iqs62x->ati_done);
 556         }
 557
 558         /*
 559          * Reset and ATI events are not broadcast to the sub-device drivers
 560          * until ATI has completed. Any other events that may have occurred
 561          * during ATI are ignored.
 562          */
 563         if (completion_done(&iqs62x->ati_done)) {
 564                 event_flags |= iqs62x->event_cache;
 565                 ret = blocking_notifier_call_chain(&iqs62x->nh, event_flags,
 566                                                    &event_data);
 567                 if (ret & NOTIFY_STOP_MASK)
 568                         return IRQ_NONE;
 569
 570                 iqs62x->event_cache = 0;
 571         }
 572
 573         /*
 574          * Once the communication window is closed, a small delay is added to
 575          * ensure the device's RDY output has been deasserted by the time the
 576          * interrupt handler returns.
 577          */
 578         usleep_range(150, 200);
 579
 580         return IRQ_HANDLED;
 581 }
 582
 583 static void iqs62x_firmware_load(const struct firmware *fw, void *context)
 584 {
 585         struct iqs62x_core *iqs62x = context;
 586         struct i2c_client *client = iqs62x->client;
 587         int ret;
 588
 589         if (fw) {
 590                 ret = iqs62x_firmware_parse(iqs62x, fw);
 591                 if (ret) {
 592                         dev_err(&client->dev, "Failed to parse firmware: %d\n",
 593                                 ret);
 594                         goto err_out;
 595                 }
 596         }
 597
 598         ret = iqs62x_dev_init(iqs62x);
 599         if (ret) {
 600                 dev_err(&client->dev, "Failed to initialize device: %d\n", ret);
 601                 goto err_out;
 602         }
 603
 604         ret = devm_request_threaded_irq(&client->dev, client->irq,
 605                                         NULL, iqs62x_irq, IRQF_ONESHOT,
 606                                         client->name, iqs62x);
 607         if (ret) {
 608                 dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
 609                 goto err_out;
 610         }
 611
 612         if (!wait_for_completion_timeout(&iqs62x->ati_done,
 613                                          msecs_to_jiffies(2000))) {
 614                 dev_err(&client->dev, "Failed to complete ATI\n");
 615                 goto err_out;
 616         }
 617
 618         ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
 619                                    iqs62x->dev_desc->sub_devs,
 620                                    iqs62x->dev_desc->num_sub_devs,
 621                                    NULL, 0, NULL);
 622         if (ret)
 623                 dev_err(&client->dev, "Failed to add sub-devices: %d\n", ret);
 624
 625 err_out:
 626         complete_all(&iqs62x->fw_done);
 627 }
 628
 629 static const struct mfd_cell iqs620at_sub_devs[] = {
 630         {
 631                 .name = "iqs62x-keys",
 632                 .of_compatible = "azoteq,iqs620a-keys",
 633         },
 634         {
 635                 .name = "iqs620a-pwm",
 636                 .of_compatible = "azoteq,iqs620a-pwm",
 637         },
 638         { .name = "iqs620at-temp", },
 639 };
 640
 641 static const struct mfd_cell iqs620a_sub_devs[] = {
 642         {
 643                 .name = "iqs62x-keys",
 644                 .of_compatible = "azoteq,iqs620a-keys",
 645         },
 646         {
 647                 .name = "iqs620a-pwm",
 648                 .of_compatible = "azoteq,iqs620a-pwm",
 649         },
 650 };
 651
 652 static const struct mfd_cell iqs621_sub_devs[] = {
 653         {
 654                 .name = "iqs62x-keys",
 655                 .of_compatible = "azoteq,iqs621-keys",
 656         },
 657         { .name = "iqs621-als", },
 658 };
 659
 660 static const struct mfd_cell iqs622_sub_devs[] = {
 661         {
 662                 .name = "iqs62x-keys",
 663                 .of_compatible = "azoteq,iqs622-keys",
 664         },
 665         { .name = "iqs621-als", },
 666 };
 667
 668 static const struct mfd_cell iqs624_sub_devs[] = {
 669         {
 670                 .name = "iqs62x-keys",
 671                 .of_compatible = "azoteq,iqs624-keys",
 672         },
 673         { .name = "iqs624-pos", },
 674 };
 675
 676 static const struct mfd_cell iqs625_sub_devs[] = {
 677         {
 678                 .name = "iqs62x-keys",
 679                 .of_compatible = "azoteq,iqs625-keys",
 680         },
 681         { .name = "iqs624-pos", },
 682 };
 683
 684 static const u8 iqs620at_cal_regs[] = {
 685         IQS620_TEMP_CAL_MULT,
 686         IQS620_TEMP_CAL_DIV,
 687         IQS620_TEMP_CAL_OFFS,
 688 };
 689
 690 static const u8 iqs621_cal_regs[] = {
 691         IQS621_ALS_CAL_DIV_LUX,
 692         IQS621_ALS_CAL_DIV_IR,
 693 };
 694
 695 static const enum iqs62x_event_reg iqs620a_event_regs[][IQS62X_EVENT_SIZE] = {
 696         [IQS62X_UI_PROX] = {
 697                 IQS62X_EVENT_SYS,       /* 0x10 */
 698                 IQS62X_EVENT_NONE,
 699                 IQS62X_EVENT_PROX,      /* 0x12 */
 700                 IQS62X_EVENT_HYST,      /* 0x13 */
 701                 IQS62X_EVENT_NONE,
 702                 IQS62X_EVENT_NONE,
 703                 IQS62X_EVENT_HALL,      /* 0x16 */
 704                 IQS62X_EVENT_NONE,
 705                 IQS62X_EVENT_NONE,
 706                 IQS62X_EVENT_NONE,
 707         },
 708         [IQS62X_UI_SAR1] = {
 709                 IQS62X_EVENT_SYS,       /* 0x10 */
 710                 IQS62X_EVENT_NONE,
 711                 IQS62X_EVENT_NONE,
 712                 IQS62X_EVENT_HYST,      /* 0x13 */
 713                 IQS62X_EVENT_NONE,
 714                 IQS62X_EVENT_NONE,
 715                 IQS62X_EVENT_HALL,      /* 0x16 */
 716                 IQS62X_EVENT_NONE,
 717                 IQS62X_EVENT_NONE,
 718                 IQS62X_EVENT_NONE,
 719         },
 720 };
 721
 722 static const enum iqs62x_event_reg iqs621_event_regs[][IQS62X_EVENT_SIZE] = {
 723         [IQS62X_UI_PROX] = {
 724                 IQS62X_EVENT_SYS,       /* 0x10 */
 725                 IQS62X_EVENT_NONE,
 726                 IQS62X_EVENT_PROX,      /* 0x12 */
 727                 IQS62X_EVENT_HYST,      /* 0x13 */
 728                 IQS62X_EVENT_NONE,
 729                 IQS62X_EVENT_NONE,
 730                 IQS62X_EVENT_ALS,       /* 0x16 */
 731                 IQS62X_EVENT_UI_LO,     /* 0x17 */
 732                 IQS62X_EVENT_UI_HI,     /* 0x18 */
 733                 IQS62X_EVENT_HALL,      /* 0x19 */
 734         },
 735 };
 736
 737 static const enum iqs62x_event_reg iqs622_event_regs[][IQS62X_EVENT_SIZE] = {
 738         [IQS62X_UI_PROX] = {
 739                 IQS62X_EVENT_SYS,       /* 0x10 */
 740                 IQS62X_EVENT_NONE,
 741                 IQS62X_EVENT_PROX,      /* 0x12 */
 742                 IQS62X_EVENT_NONE,
 743                 IQS62X_EVENT_ALS,       /* 0x14 */
 744                 IQS62X_EVENT_NONE,
 745                 IQS62X_EVENT_IR,        /* 0x16 */
 746                 IQS62X_EVENT_UI_LO,     /* 0x17 */
 747                 IQS62X_EVENT_UI_HI,     /* 0x18 */
 748                 IQS62X_EVENT_HALL,      /* 0x19 */
 749         },
 750         [IQS62X_UI_SAR1] = {
 751                 IQS62X_EVENT_SYS,       /* 0x10 */
 752                 IQS62X_EVENT_NONE,
 753                 IQS62X_EVENT_NONE,
 754                 IQS62X_EVENT_HYST,      /* 0x13 */
 755                 IQS62X_EVENT_ALS,       /* 0x14 */
 756                 IQS62X_EVENT_NONE,
 757                 IQS62X_EVENT_IR,        /* 0x16 */
 758                 IQS62X_EVENT_UI_LO,     /* 0x17 */
 759                 IQS62X_EVENT_UI_HI,     /* 0x18 */
 760                 IQS62X_EVENT_HALL,      /* 0x19 */
 761         },
 762 };
 763
 764 static const enum iqs62x_event_reg iqs624_event_regs[][IQS62X_EVENT_SIZE] = {
 765         [IQS62X_UI_PROX] = {
 766                 IQS62X_EVENT_SYS,       /* 0x10 */
 767                 IQS62X_EVENT_NONE,
 768                 IQS62X_EVENT_PROX,      /* 0x12 */
 769                 IQS62X_EVENT_NONE,
 770                 IQS62X_EVENT_WHEEL,     /* 0x14 */
 771                 IQS62X_EVENT_NONE,
 772                 IQS62X_EVENT_UI_LO,     /* 0x16 */
 773                 IQS62X_EVENT_UI_HI,     /* 0x17 */
 774                 IQS62X_EVENT_INTER,     /* 0x18 */
 775                 IQS62X_EVENT_NONE,
 776         },
 777 };
 778
 779 static const enum iqs62x_event_reg iqs625_event_regs[][IQS62X_EVENT_SIZE] = {
 780         [IQS62X_UI_PROX] = {
 781                 IQS62X_EVENT_SYS,       /* 0x10 */
 782                 IQS62X_EVENT_PROX,      /* 0x11 */
 783                 IQS62X_EVENT_INTER,     /* 0x12 */
 784                 IQS62X_EVENT_NONE,
 785                 IQS62X_EVENT_NONE,
 786                 IQS62X_EVENT_NONE,
 787                 IQS62X_EVENT_NONE,
 788                 IQS62X_EVENT_NONE,
 789                 IQS62X_EVENT_NONE,
 790                 IQS62X_EVENT_NONE,
 791         },
 792 };
 793
 794 static const struct iqs62x_dev_desc iqs62x_devs[] = {
 795         {
 796                 .dev_name       = "iqs620at",
 797                 .sub_devs       = iqs620at_sub_devs,
 798                 .num_sub_devs   = ARRAY_SIZE(iqs620at_sub_devs),
 799                 .prod_num       = IQS620_PROD_NUM,
 800                 .sw_num         = 0x08,
 801                 .cal_regs       = iqs620at_cal_regs,
 802                 .num_cal_regs   = ARRAY_SIZE(iqs620at_cal_regs),
 803                 .prox_mask      = BIT(0),
 804                 .sar_mask       = BIT(1) | BIT(7),
 805                 .hall_mask      = BIT(2),
 806                 .hyst_mask      = BIT(3),
 807                 .temp_mask      = BIT(4),
 808                 .prox_settings  = IQS620_PROX_SETTINGS_4,
 809                 .hall_flags     = IQS620_HALL_FLAGS,
 810                 .fw_name        = "iqs620a.bin",
 811                 .event_regs     = &iqs620a_event_regs[IQS62X_UI_PROX],
 812         },
 813         {
 814                 .dev_name       = "iqs620a",
 815                 .sub_devs       = iqs620a_sub_devs,
 816                 .num_sub_devs   = ARRAY_SIZE(iqs620a_sub_devs),
 817                 .prod_num       = IQS620_PROD_NUM,
 818                 .sw_num         = 0x08,
 819                 .prox_mask      = BIT(0),
 820                 .sar_mask       = BIT(1) | BIT(7),
 821                 .hall_mask      = BIT(2),
 822                 .hyst_mask      = BIT(3),
 823                 .temp_mask      = BIT(4),
 824                 .prox_settings  = IQS620_PROX_SETTINGS_4,
 825                 .hall_flags     = IQS620_HALL_FLAGS,
 826                 .fw_name        = "iqs620a.bin",
 827                 .event_regs     = &iqs620a_event_regs[IQS62X_UI_PROX],
 828         },
 829         {
 830                 .dev_name       = "iqs621",
 831                 .sub_devs       = iqs621_sub_devs,
 832                 .num_sub_devs   = ARRAY_SIZE(iqs621_sub_devs),
 833                 .prod_num       = IQS621_PROD_NUM,
 834                 .sw_num         = 0x09,
 835                 .cal_regs       = iqs621_cal_regs,
 836                 .num_cal_regs   = ARRAY_SIZE(iqs621_cal_regs),
 837                 .prox_mask      = BIT(0),
 838                 .hall_mask      = BIT(1),
 839                 .als_mask       = BIT(2),
 840                 .hyst_mask      = BIT(3),
 841                 .temp_mask      = BIT(4),
 842                 .als_flags      = IQS621_ALS_FLAGS,
 843                 .hall_flags     = IQS621_HALL_FLAGS,
 844                 .hyst_shift     = 5,
 845                 .fw_name        = "iqs621.bin",
 846                 .event_regs     = &iqs621_event_regs[IQS62X_UI_PROX],
 847         },
 848         {
 849                 .dev_name       = "iqs622",
 850                 .sub_devs       = iqs622_sub_devs,
 851                 .num_sub_devs   = ARRAY_SIZE(iqs622_sub_devs),
 852                 .prod_num       = IQS622_PROD_NUM,
 853                 .sw_num         = 0x06,
 854                 .prox_mask      = BIT(0),
 855                 .sar_mask       = BIT(1),
 856                 .hall_mask      = BIT(2),
 857                 .als_mask       = BIT(3),
 858                 .ir_mask        = BIT(4),
 859                 .prox_settings  = IQS622_PROX_SETTINGS_4,
 860                 .als_flags      = IQS622_ALS_FLAGS,
 861                 .hall_flags     = IQS622_HALL_FLAGS,
 862                 .fw_name        = "iqs622.bin",
 863                 .event_regs     = &iqs622_event_regs[IQS62X_UI_PROX],
 864         },
 865         {
 866                 .dev_name       = "iqs624",
 867                 .sub_devs       = iqs624_sub_devs,
 868                 .num_sub_devs   = ARRAY_SIZE(iqs624_sub_devs),
 869                 .prod_num       = IQS624_PROD_NUM,
 870                 .sw_num         = 0x0B,
 871                 .interval       = IQS624_INTERVAL_NUM,
 872                 .interval_div   = 3,
 873                 .fw_name        = "iqs624.bin",
 874                 .event_regs     = &iqs624_event_regs[IQS62X_UI_PROX],
 875         },
 876         {
 877                 .dev_name       = "iqs625",
 878                 .sub_devs       = iqs625_sub_devs,
 879                 .num_sub_devs   = ARRAY_SIZE(iqs625_sub_devs),
 880                 .prod_num       = IQS625_PROD_NUM,
 881                 .sw_num         = 0x0B,
 882                 .interval       = IQS625_INTERVAL_NUM,
 883                 .interval_div   = 10,
 884                 .fw_name        = "iqs625.bin",
 885                 .event_regs     = &iqs625_event_regs[IQS62X_UI_PROX],
 886         },
 887 };
 888
 889 static const struct regmap_config iqs62x_regmap_config = {
 890         .reg_bits = 8,
 891         .val_bits = 8,
 892         .max_register = IQS62X_MAX_REG,
 893 };
 894
 895 static int iqs62x_probe(struct i2c_client *client)
 896 {
 897         struct iqs62x_core *iqs62x;
 898         struct iqs62x_info info;
 899         unsigned int val;
 900         int ret, i, j;
 901         const char *fw_name = NULL;
 902
 903         iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL);
 904         if (!iqs62x)
 905                 return -ENOMEM;
 906
 907         i2c_set_clientdata(client, iqs62x);
 908         iqs62x->client = client;
 909
 910         BLOCKING_INIT_NOTIFIER_HEAD(&iqs62x->nh);
 911         INIT_LIST_HEAD(&iqs62x->fw_blk_head);
 912
 913         init_completion(&iqs62x->ati_done);
 914         init_completion(&iqs62x->fw_done);
 915
 916         iqs62x->regmap = devm_regmap_init_i2c(client, &iqs62x_regmap_config);
 917         if (IS_ERR(iqs62x->regmap)) {
 918                 ret = PTR_ERR(iqs62x->regmap);
 919                 dev_err(&client->dev, "Failed to initialize register map: %d\n",
 920                         ret);
 921                 return ret;
 922         }
 923
 924         ret = regmap_raw_read(iqs62x->regmap, IQS62X_PROD_NUM, &info,
 925                               sizeof(info));
 926         if (ret)
 927                 return ret;
 928
 929         /*
 930          * The following sequence validates the device's product and software
 931          * numbers. It then determines if the device is factory-calibrated by
 932          * checking for nonzero values in the device's designated calibration
 933          * registers (if applicable). Depending on the device, the absence of
 934          * calibration data indicates a reduced feature set or invalid device.
 935          *
 936          * For devices given in both calibrated and uncalibrated versions, the
 937          * calibrated version (e.g. IQS620AT) appears first in the iqs62x_devs
 938          * array. The uncalibrated version (e.g. IQS620A) appears next and has
 939          * the same product and software numbers, but no calibration registers
 940          * are specified.
 941          */
 942         for (i = 0; i < ARRAY_SIZE(iqs62x_devs); i++) {
 943                 if (info.prod_num != iqs62x_devs[i].prod_num)
 944                         continue;
 945
 946                 iqs62x->dev_desc = &iqs62x_devs[i];
 947
 948                 if (info.sw_num < iqs62x->dev_desc->sw_num)
 949                         continue;
 950
 951                 iqs62x->sw_num = info.sw_num;
 952                 iqs62x->hw_num = info.hw_num;
 953
 954                 /*
 955                  * Read each of the device's designated calibration registers,
 956                  * if any, and exit from the inner loop early if any are equal
 957                  * to zero (indicating the device is uncalibrated). This could
 958                  * be acceptable depending on the device (e.g. IQS620A instead
 959                  * of IQS620AT).
 960                  */
 961                 for (j = 0; j < iqs62x->dev_desc->num_cal_regs; j++) {
 962                         ret = regmap_read(iqs62x->regmap,
 963                                           iqs62x->dev_desc->cal_regs[j], &val);
 964                         if (ret)
 965                                 return ret;
 966
 967                         if (!val)
 968                                 break;
 969                 }
 970
 971                 /*
 972                  * If the number of nonzero values read from the device equals
 973                  * the number of designated calibration registers (which could
 974                  * be zero), exit from the outer loop early to signal that the
 975                  * device's product and software numbers match a known device,
 976                  * and the device is calibrated (if applicable).
 977                  */
 978                 if (j == iqs62x->dev_desc->num_cal_regs)
 979                         break;
 980         }
 981
 982         if (!iqs62x->dev_desc) {
 983                 dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
 984                         info.prod_num);
 985                 return -EINVAL;
 986         }
 987
 988         if (!iqs62x->sw_num) {
 989                 dev_err(&client->dev, "Unrecognized software number: 0x%02X\n",
 990                         info.sw_num);
 991                 return -EINVAL;
 992         }
 993
 994         if (i == ARRAY_SIZE(iqs62x_devs)) {
 995                 dev_err(&client->dev, "Uncalibrated device\n");
 996                 return -ENODATA;
 997         }
 998
 999         device_property_read_string(&client->dev, "firmware-name", &fw_name);
1000
1001         ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
1002                                       fw_name ? : iqs62x->dev_desc->fw_name,
1003                                       &client->dev, GFP_KERNEL, iqs62x,
1004                                       iqs62x_firmware_load);
1005         if (ret)
1006                 dev_err(&client->dev, "Failed to request firmware: %d\n", ret);
1007
1008         return ret;
1009 }
1010
1011 static void iqs62x_remove(struct i2c_client *client)
1012 {
1013         struct iqs62x_core *iqs62x = i2c_get_clientdata(client);
1014
1015         wait_for_completion(&iqs62x->fw_done);
1016 }
1017
1018 static int __maybe_unused iqs62x_suspend(struct device *dev)
1019 {
1020         struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
1021         int ret;
1022
1023         wait_for_completion(&iqs62x->fw_done);
1024
1025         /*
1026          * As per the datasheet, automatic mode switching must be disabled
1027          * before the device is placed in or taken out of halt mode.
1028          */
1029         ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
1030                                  IQS62X_PWR_SETTINGS_DIS_AUTO, 0xFF);
1031         if (ret)
1032                 return ret;
1033
1034         return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
1035                                   IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
1036                                   IQS62X_PWR_SETTINGS_PWR_MODE_HALT);
1037 }
1038
1039 static int __maybe_unused iqs62x_resume(struct device *dev)
1040 {
1041         struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
1042         int ret;
1043
1044         ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
1045                                  IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
1046                                  IQS62X_PWR_SETTINGS_PWR_MODE_NORM);
1047         if (ret)
1048                 return ret;
1049
1050         return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
1051                                   IQS62X_PWR_SETTINGS_DIS_AUTO, 0);
1052 }
1053
1054 static SIMPLE_DEV_PM_OPS(iqs62x_pm, iqs62x_suspend, iqs62x_resume);
1055
1056 static const struct of_device_id iqs62x_of_match[] = {
1057         { .compatible = "azoteq,iqs620a" },
1058         { .compatible = "azoteq,iqs621" },
1059         { .compatible = "azoteq,iqs622" },
1060         { .compatible = "azoteq,iqs624" },
1061         { .compatible = "azoteq,iqs625" },
1062         { }
1063 };
1064 MODULE_DEVICE_TABLE(of, iqs62x_of_match);
1065
1066 static struct i2c_driver iqs62x_i2c_driver = {
1067         .driver = {
1068                 .name = "iqs62x",
1069                 .of_match_table = iqs62x_of_match,
1070                 .pm = &iqs62x_pm,
1071         },
1072         .probe_new = iqs62x_probe,
1073         .remove = iqs62x_remove,
1074 };
1075 module_i2c_driver(iqs62x_i2c_driver);
1076
1077 MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
1078 MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Multi-Function Sensors");
1079 MODULE_LICENSE("GPL");