2 * Streamzap Remote Control driver
4 * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
5 * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
7 * This driver was based on the work of Greg Wickham and Adrian
8 * Dewhurst. It was substantially rewritten to support correct signal
9 * gaps and now maintains a delay buffer, which is used to present
10 * consistent timing behaviour to user space applications. Without the
11 * delay buffer an ugly hack would be required in lircd, which can
12 * cause sluggish signal decoding in certain situations.
14 * Ported to in-kernel ir-core interface by Jarod Wilson
16 * This driver is based on the USB skeleton driver packaged with the
17 * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
34 #include <linux/device.h>
35 #include <linux/module.h>
36 #include <linux/slab.h>
37 #include <linux/usb.h>
38 #include <linux/usb/input.h>
39 #include <media/rc-core.h>
41 #define DRIVER_VERSION "1.61"
42 #define DRIVER_NAME "streamzap"
43 #define DRIVER_DESC "Streamzap Remote Control driver"
45 #ifdef CONFIG_USB_DEBUG
46 static bool debug = 1;
51 #define USB_STREAMZAP_VENDOR_ID 0x0e9c
52 #define USB_STREAMZAP_PRODUCT_ID 0x0000
54 /* table of devices that work with this driver */
55 static struct usb_device_id streamzap_table[] = {
56 /* Streamzap Remote Control */
57 { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
58 /* Terminating entry */
62 MODULE_DEVICE_TABLE(usb, streamzap_table);
64 #define SZ_PULSE_MASK 0xf0
65 #define SZ_SPACE_MASK 0x0f
66 #define SZ_TIMEOUT 0xff
67 #define SZ_RESOLUTION 256
69 /* number of samples buffered */
70 #define SZ_BUF_LEN 128
72 /* from ir-rc5-sz-decoder.c */
73 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
74 #define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder")
76 #define load_rc5_sz_decode() {}
79 enum StreamzapDecoderState {
86 /* structure to hold our device specific stuff */
91 /* core device info */
95 struct usb_device *usbdev;
96 struct usb_interface *interface;
97 struct usb_endpoint_descriptor *endpoint;
101 unsigned char *buf_in;
103 unsigned int buf_in_len;
105 /* track what state we're in */
106 enum StreamzapDecoderState decoder_state;
107 /* tracks whether we are currently receiving some signal */
109 /* sum of signal lengths received since signal start */
111 /* start time of signal; necessary for gap tracking */
112 struct timeval signal_last;
113 struct timeval signal_start;
114 bool timeout_enabled;
121 /* local function prototypes */
122 static int streamzap_probe(struct usb_interface *interface,
123 const struct usb_device_id *id);
124 static void streamzap_disconnect(struct usb_interface *interface);
125 static void streamzap_callback(struct urb *urb);
126 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
127 static int streamzap_resume(struct usb_interface *intf);
129 /* usb specific object needed to register this driver with the usb subsystem */
130 static struct usb_driver streamzap_driver = {
132 .probe = streamzap_probe,
133 .disconnect = streamzap_disconnect,
134 .suspend = streamzap_suspend,
135 .resume = streamzap_resume,
136 .id_table = streamzap_table,
139 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
141 dev_dbg(sz->dev, "Storing %s with duration %u us\n",
142 (rawir.pulse ? "pulse" : "space"), rawir.duration);
143 ir_raw_event_store_with_filter(sz->rdev, &rawir);
146 static void sz_push_full_pulse(struct streamzap_ir *sz,
149 DEFINE_IR_RAW_EVENT(rawir);
154 sz->signal_last = sz->signal_start;
155 do_gettimeofday(&sz->signal_start);
157 deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
160 /* really long time */
161 rawir.duration = IR_MAX_DURATION;
163 rawir.duration = (int)(deltv * 1000000 +
164 sz->signal_start.tv_usec -
165 sz->signal_last.tv_usec);
166 rawir.duration -= sz->sum;
167 rawir.duration = US_TO_NS(rawir.duration);
168 rawir.duration &= IR_MAX_DURATION;
177 rawir.duration = ((int) value) * SZ_RESOLUTION;
178 rawir.duration += SZ_RESOLUTION / 2;
179 sz->sum += rawir.duration;
180 rawir.duration = US_TO_NS(rawir.duration);
181 rawir.duration &= IR_MAX_DURATION;
185 static void sz_push_half_pulse(struct streamzap_ir *sz,
188 sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
191 static void sz_push_full_space(struct streamzap_ir *sz,
194 DEFINE_IR_RAW_EVENT(rawir);
197 rawir.duration = ((int) value) * SZ_RESOLUTION;
198 rawir.duration += SZ_RESOLUTION / 2;
199 sz->sum += rawir.duration;
200 rawir.duration = US_TO_NS(rawir.duration);
204 static void sz_push_half_space(struct streamzap_ir *sz,
207 sz_push_full_space(sz, value & SZ_SPACE_MASK);
211 * streamzap_callback - usb IRQ handler callback
213 * This procedure is invoked on reception of data from
216 static void streamzap_callback(struct urb *urb)
218 struct streamzap_ir *sz;
226 len = urb->actual_length;
228 switch (urb->status) {
233 * this urb is terminated, clean up.
234 * sz might already be invalid at this point
236 dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
242 dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
243 for (i = 0; i < len; i++) {
244 dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
245 i, (unsigned char)sz->buf_in[i]);
246 switch (sz->decoder_state) {
248 if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
250 sz->decoder_state = FullPulse;
252 } else if ((sz->buf_in[i] & SZ_SPACE_MASK)
254 sz_push_half_pulse(sz, sz->buf_in[i]);
255 sz->decoder_state = FullSpace;
258 sz_push_half_pulse(sz, sz->buf_in[i]);
259 sz_push_half_space(sz, sz->buf_in[i]);
263 sz_push_full_pulse(sz, sz->buf_in[i]);
264 sz->decoder_state = IgnorePulse;
267 if (sz->buf_in[i] == SZ_TIMEOUT) {
268 DEFINE_IR_RAW_EVENT(rawir);
271 rawir.duration = sz->rdev->timeout;
273 if (sz->timeout_enabled)
275 ir_raw_event_handle(sz->rdev);
276 ir_raw_event_reset(sz->rdev);
278 sz_push_full_space(sz, sz->buf_in[i]);
280 sz->decoder_state = PulseSpace;
283 if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
285 sz->decoder_state = FullSpace;
288 sz_push_half_space(sz, sz->buf_in[i]);
289 sz->decoder_state = PulseSpace;
294 ir_raw_event_handle(sz->rdev);
295 usb_submit_urb(urb, GFP_ATOMIC);
300 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
303 struct device *dev = sz->dev;
306 rdev = rc_allocate_device();
308 dev_err(dev, "remote dev allocation failed\n");
312 snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
313 "Receiver (%04x:%04x)",
314 le16_to_cpu(sz->usbdev->descriptor.idVendor),
315 le16_to_cpu(sz->usbdev->descriptor.idProduct));
316 usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
317 strlcat(sz->phys, "/input0", sizeof(sz->phys));
319 rdev->input_name = sz->name;
320 rdev->input_phys = sz->phys;
321 usb_to_input_id(sz->usbdev, &rdev->input_id);
322 rdev->dev.parent = dev;
324 rdev->driver_type = RC_DRIVER_IR_RAW;
325 rdev->allowed_protos = RC_BIT_ALL;
326 rdev->driver_name = DRIVER_NAME;
327 rdev->map_name = RC_MAP_STREAMZAP;
329 ret = rc_register_device(rdev);
331 dev_err(dev, "remote input device register failed\n");
338 rc_free_device(rdev);
345 * Called by usb-core to associated with a candidate device
346 * On any failure the return value is the ERROR
347 * On success return 0
349 static int streamzap_probe(struct usb_interface *intf,
350 const struct usb_device_id *id)
352 struct usb_device *usbdev = interface_to_usbdev(intf);
353 struct usb_host_interface *iface_host;
354 struct streamzap_ir *sz = NULL;
355 char buf[63], name[128] = "";
356 int retval = -ENOMEM;
359 /* Allocate space for device driver specific data */
360 sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
365 sz->interface = intf;
367 /* Check to ensure endpoint information matches requirements */
368 iface_host = intf->cur_altsetting;
370 if (iface_host->desc.bNumEndpoints != 1) {
371 dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
372 __func__, iface_host->desc.bNumEndpoints);
377 sz->endpoint = &(iface_host->endpoint[0].desc);
378 if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
380 dev_err(&intf->dev, "%s: endpoint doesn't match input device "
381 "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
386 if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
387 != USB_ENDPOINT_XFER_INT) {
388 dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
389 "02%02x\n", __func__, sz->endpoint->bmAttributes);
394 pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
395 maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
398 dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
404 /* Allocate the USB buffer and IRQ URB */
405 sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
409 sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
413 sz->dev = &intf->dev;
414 sz->buf_in_len = maxp;
416 if (usbdev->descriptor.iManufacturer
417 && usb_string(usbdev, usbdev->descriptor.iManufacturer,
418 buf, sizeof(buf)) > 0)
419 strlcpy(name, buf, sizeof(name));
421 if (usbdev->descriptor.iProduct
422 && usb_string(usbdev, usbdev->descriptor.iProduct,
423 buf, sizeof(buf)) > 0)
424 snprintf(name + strlen(name), sizeof(name) - strlen(name),
427 sz->rdev = streamzap_init_rc_dev(sz);
432 sz->decoder_state = PulseSpace;
433 /* FIXME: don't yet have a way to set this */
434 sz->timeout_enabled = true;
435 sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
436 IR_MAX_DURATION) | 0x03000000);
438 /* not yet supported, depends on patches from maxim */
439 /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
440 sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
441 sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
444 do_gettimeofday(&sz->signal_start);
446 /* Complete final initialisations */
447 usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
448 maxp, (usb_complete_t)streamzap_callback,
449 sz, sz->endpoint->bInterval);
450 sz->urb_in->transfer_dma = sz->dma_in;
451 sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
453 usb_set_intfdata(intf, sz);
455 if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
456 dev_err(sz->dev, "urb submit failed\n");
458 dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
459 usbdev->bus->busnum, usbdev->devnum);
461 /* Load the streamzap not-quite-rc5 decoder too */
462 load_rc5_sz_decode();
467 usb_free_urb(sz->urb_in);
469 usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
477 * streamzap_disconnect
479 * Called by the usb core when the device is removed from the system.
481 * This routine guarantees that the driver will not submit any more urbs
482 * by clearing dev->usbdev. It is also supposed to terminate any currently
483 * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
484 * does not provide any way to do this.
486 static void streamzap_disconnect(struct usb_interface *interface)
488 struct streamzap_ir *sz = usb_get_intfdata(interface);
489 struct usb_device *usbdev = interface_to_usbdev(interface);
491 usb_set_intfdata(interface, NULL);
497 rc_unregister_device(sz->rdev);
498 usb_kill_urb(sz->urb_in);
499 usb_free_urb(sz->urb_in);
500 usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
505 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
507 struct streamzap_ir *sz = usb_get_intfdata(intf);
509 usb_kill_urb(sz->urb_in);
514 static int streamzap_resume(struct usb_interface *intf)
516 struct streamzap_ir *sz = usb_get_intfdata(intf);
518 if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
519 dev_err(sz->dev, "Error sumbiting urb\n");
526 module_usb_driver(streamzap_driver);
528 MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
529 MODULE_DESCRIPTION(DRIVER_DESC);
530 MODULE_LICENSE("GPL");
532 module_param(debug, bool, S_IRUGO | S_IWUSR);
533 MODULE_PARM_DESC(debug, "Enable debugging messages");