1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * raid10.c : Multiple Devices driver for Linux
5 * Copyright (C) 2000-2004 Neil Brown
7 * RAID-10 support for md.
9 * Base on code in raid1.c. See raid1.c for further copyright information.
12 #include <linux/slab.h>
13 #include <linux/delay.h>
14 #include <linux/blkdev.h>
15 #include <linux/module.h>
16 #include <linux/seq_file.h>
17 #include <linux/ratelimit.h>
18 #include <linux/kthread.h>
19 #include <linux/raid/md_p.h>
20 #include <trace/events/block.h>
24 #include "md-bitmap.h"
27 * RAID10 provides a combination of RAID0 and RAID1 functionality.
28 * The layout of data is defined by
31 * near_copies (stored in low byte of layout)
32 * far_copies (stored in second byte of layout)
33 * far_offset (stored in bit 16 of layout )
34 * use_far_sets (stored in bit 17 of layout )
35 * use_far_sets_bugfixed (stored in bit 18 of layout )
37 * The data to be stored is divided into chunks using chunksize. Each device
38 * is divided into far_copies sections. In each section, chunks are laid out
39 * in a style similar to raid0, but near_copies copies of each chunk is stored
40 * (each on a different drive). The starting device for each section is offset
41 * near_copies from the starting device of the previous section. Thus there
42 * are (near_copies * far_copies) of each chunk, and each is on a different
43 * drive. near_copies and far_copies must be at least one, and their product
44 * is at most raid_disks.
46 * If far_offset is true, then the far_copies are handled a bit differently.
47 * The copies are still in different stripes, but instead of being very far
48 * apart on disk, there are adjacent stripes.
50 * The far and offset algorithms are handled slightly differently if
51 * 'use_far_sets' is true. In this case, the array's devices are grouped into
52 * sets that are (near_copies * far_copies) in size. The far copied stripes
53 * are still shifted by 'near_copies' devices, but this shifting stays confined
54 * to the set rather than the entire array. This is done to improve the number
55 * of device combinations that can fail without causing the array to fail.
56 * Example 'far' algorithm w/o 'use_far_sets' (each letter represents a chunk
61 * Example 'far' algorithm w/ 'use_far_sets' enabled (sets illustrated w/ []'s):
62 * [A B] [C D] [A B] [C D E]
63 * |...| |...| |...| | ... |
64 * [B A] [D C] [B A] [E C D]
67 static void allow_barrier(struct r10conf *conf);
68 static void lower_barrier(struct r10conf *conf);
69 static int _enough(struct r10conf *conf, int previous, int ignore);
70 static int enough(struct r10conf *conf, int ignore);
71 static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
73 static void reshape_request_write(struct mddev *mddev, struct r10bio *r10_bio);
74 static void end_reshape_write(struct bio *bio);
75 static void end_reshape(struct r10conf *conf);
77 #define raid10_log(md, fmt, args...) \
78 do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid10 " fmt, ##args); } while (0)
83 * for resync bio, r10bio pointer can be retrieved from the per-bio
84 * 'struct resync_pages'.
86 static inline struct r10bio *get_resync_r10bio(struct bio *bio)
88 return get_resync_pages(bio)->raid_bio;
91 static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
93 struct r10conf *conf = data;
94 int size = offsetof(struct r10bio, devs[conf->copies]);
96 /* allocate a r10bio with room for raid_disks entries in the
98 return kzalloc(size, gfp_flags);
101 #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
102 /* amount of memory to reserve for resync requests */
103 #define RESYNC_WINDOW (1024*1024)
104 /* maximum number of concurrent requests, memory permitting */
105 #define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
106 #define CLUSTER_RESYNC_WINDOW (32 * RESYNC_WINDOW)
107 #define CLUSTER_RESYNC_WINDOW_SECTORS (CLUSTER_RESYNC_WINDOW >> 9)
110 * When performing a resync, we need to read and compare, so
111 * we need as many pages are there are copies.
112 * When performing a recovery, we need 2 bios, one for read,
113 * one for write (we recover only one drive per r10buf)
116 static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data)
118 struct r10conf *conf = data;
119 struct r10bio *r10_bio;
122 int nalloc, nalloc_rp;
123 struct resync_pages *rps;
125 r10_bio = r10bio_pool_alloc(gfp_flags, conf);
129 if (test_bit(MD_RECOVERY_SYNC, &conf->mddev->recovery) ||
130 test_bit(MD_RECOVERY_RESHAPE, &conf->mddev->recovery))
131 nalloc = conf->copies; /* resync */
133 nalloc = 2; /* recovery */
135 /* allocate once for all bios */
136 if (!conf->have_replacement)
139 nalloc_rp = nalloc * 2;
140 rps = kmalloc_array(nalloc_rp, sizeof(struct resync_pages), gfp_flags);
142 goto out_free_r10bio;
147 for (j = nalloc ; j-- ; ) {
148 bio = bio_kmalloc(gfp_flags, RESYNC_PAGES);
151 r10_bio->devs[j].bio = bio;
152 if (!conf->have_replacement)
154 bio = bio_kmalloc(gfp_flags, RESYNC_PAGES);
157 r10_bio->devs[j].repl_bio = bio;
160 * Allocate RESYNC_PAGES data pages and attach them
163 for (j = 0; j < nalloc; j++) {
164 struct bio *rbio = r10_bio->devs[j].repl_bio;
165 struct resync_pages *rp, *rp_repl;
169 rp_repl = &rps[nalloc + j];
171 bio = r10_bio->devs[j].bio;
173 if (!j || test_bit(MD_RECOVERY_SYNC,
174 &conf->mddev->recovery)) {
175 if (resync_alloc_pages(rp, gfp_flags))
178 memcpy(rp, &rps[0], sizeof(*rp));
179 resync_get_all_pages(rp);
182 rp->raid_bio = r10_bio;
183 bio->bi_private = rp;
185 memcpy(rp_repl, rp, sizeof(*rp));
186 rbio->bi_private = rp_repl;
194 resync_free_pages(&rps[j * 2]);
198 for ( ; j < nalloc; j++) {
199 if (r10_bio->devs[j].bio)
200 bio_put(r10_bio->devs[j].bio);
201 if (r10_bio->devs[j].repl_bio)
202 bio_put(r10_bio->devs[j].repl_bio);
206 rbio_pool_free(r10_bio, conf);
210 static void r10buf_pool_free(void *__r10_bio, void *data)
212 struct r10conf *conf = data;
213 struct r10bio *r10bio = __r10_bio;
215 struct resync_pages *rp = NULL;
217 for (j = conf->copies; j--; ) {
218 struct bio *bio = r10bio->devs[j].bio;
221 rp = get_resync_pages(bio);
222 resync_free_pages(rp);
226 bio = r10bio->devs[j].repl_bio;
231 /* resync pages array stored in the 1st bio's .bi_private */
234 rbio_pool_free(r10bio, conf);
237 static void put_all_bios(struct r10conf *conf, struct r10bio *r10_bio)
241 for (i = 0; i < conf->copies; i++) {
242 struct bio **bio = & r10_bio->devs[i].bio;
243 if (!BIO_SPECIAL(*bio))
246 bio = &r10_bio->devs[i].repl_bio;
247 if (r10_bio->read_slot < 0 && !BIO_SPECIAL(*bio))
253 static void free_r10bio(struct r10bio *r10_bio)
255 struct r10conf *conf = r10_bio->mddev->private;
257 put_all_bios(conf, r10_bio);
258 mempool_free(r10_bio, &conf->r10bio_pool);
261 static void put_buf(struct r10bio *r10_bio)
263 struct r10conf *conf = r10_bio->mddev->private;
265 mempool_free(r10_bio, &conf->r10buf_pool);
270 static void reschedule_retry(struct r10bio *r10_bio)
273 struct mddev *mddev = r10_bio->mddev;
274 struct r10conf *conf = mddev->private;
276 spin_lock_irqsave(&conf->device_lock, flags);
277 list_add(&r10_bio->retry_list, &conf->retry_list);
279 spin_unlock_irqrestore(&conf->device_lock, flags);
281 /* wake up frozen array... */
282 wake_up(&conf->wait_barrier);
284 md_wakeup_thread(mddev->thread);
288 * raid_end_bio_io() is called when we have finished servicing a mirrored
289 * operation and are ready to return a success/failure code to the buffer
292 static void raid_end_bio_io(struct r10bio *r10_bio)
294 struct bio *bio = r10_bio->master_bio;
295 struct r10conf *conf = r10_bio->mddev->private;
297 if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
298 bio->bi_status = BLK_STS_IOERR;
302 * Wake up any possible resync thread that waits for the device
307 free_r10bio(r10_bio);
311 * Update disk head position estimator based on IRQ completion info.
313 static inline void update_head_pos(int slot, struct r10bio *r10_bio)
315 struct r10conf *conf = r10_bio->mddev->private;
317 conf->mirrors[r10_bio->devs[slot].devnum].head_position =
318 r10_bio->devs[slot].addr + (r10_bio->sectors);
322 * Find the disk number which triggered given bio
324 static int find_bio_disk(struct r10conf *conf, struct r10bio *r10_bio,
325 struct bio *bio, int *slotp, int *replp)
330 for (slot = 0; slot < conf->copies; slot++) {
331 if (r10_bio->devs[slot].bio == bio)
333 if (r10_bio->devs[slot].repl_bio == bio) {
339 BUG_ON(slot == conf->copies);
340 update_head_pos(slot, r10_bio);
346 return r10_bio->devs[slot].devnum;
349 static void raid10_end_read_request(struct bio *bio)
351 int uptodate = !bio->bi_status;
352 struct r10bio *r10_bio = bio->bi_private;
354 struct md_rdev *rdev;
355 struct r10conf *conf = r10_bio->mddev->private;
357 slot = r10_bio->read_slot;
358 rdev = r10_bio->devs[slot].rdev;
360 * this branch is our 'one mirror IO has finished' event handler:
362 update_head_pos(slot, r10_bio);
366 * Set R10BIO_Uptodate in our master bio, so that
367 * we will return a good error code to the higher
368 * levels even if IO on some other mirrored buffer fails.
370 * The 'master' represents the composite IO operation to
371 * user-side. So if something waits for IO, then it will
372 * wait for the 'master' bio.
374 set_bit(R10BIO_Uptodate, &r10_bio->state);
376 /* If all other devices that store this block have
377 * failed, we want to return the error upwards rather
378 * than fail the last device. Here we redefine
379 * "uptodate" to mean "Don't want to retry"
381 if (!_enough(conf, test_bit(R10BIO_Previous, &r10_bio->state),
386 raid_end_bio_io(r10_bio);
387 rdev_dec_pending(rdev, conf->mddev);
390 * oops, read error - keep the refcount on the rdev
392 char b[BDEVNAME_SIZE];
393 pr_err_ratelimited("md/raid10:%s: %s: rescheduling sector %llu\n",
395 bdevname(rdev->bdev, b),
396 (unsigned long long)r10_bio->sector);
397 set_bit(R10BIO_ReadError, &r10_bio->state);
398 reschedule_retry(r10_bio);
402 static void close_write(struct r10bio *r10_bio)
404 /* clear the bitmap if all writes complete successfully */
405 md_bitmap_endwrite(r10_bio->mddev->bitmap, r10_bio->sector,
407 !test_bit(R10BIO_Degraded, &r10_bio->state),
409 md_write_end(r10_bio->mddev);
412 static void one_write_done(struct r10bio *r10_bio)
414 if (atomic_dec_and_test(&r10_bio->remaining)) {
415 if (test_bit(R10BIO_WriteError, &r10_bio->state))
416 reschedule_retry(r10_bio);
418 close_write(r10_bio);
419 if (test_bit(R10BIO_MadeGood, &r10_bio->state))
420 reschedule_retry(r10_bio);
422 raid_end_bio_io(r10_bio);
427 static void raid10_end_write_request(struct bio *bio)
429 struct r10bio *r10_bio = bio->bi_private;
432 struct r10conf *conf = r10_bio->mddev->private;
434 struct md_rdev *rdev = NULL;
435 struct bio *to_put = NULL;
438 discard_error = bio->bi_status && bio_op(bio) == REQ_OP_DISCARD;
440 dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
443 rdev = conf->mirrors[dev].replacement;
447 rdev = conf->mirrors[dev].rdev;
450 * this branch is our 'one mirror IO has finished' event handler:
452 if (bio->bi_status && !discard_error) {
454 /* Never record new bad blocks to replacement,
457 md_error(rdev->mddev, rdev);
459 set_bit(WriteErrorSeen, &rdev->flags);
460 if (!test_and_set_bit(WantReplacement, &rdev->flags))
461 set_bit(MD_RECOVERY_NEEDED,
462 &rdev->mddev->recovery);
465 if (test_bit(FailFast, &rdev->flags) &&
466 (bio->bi_opf & MD_FAILFAST)) {
467 md_error(rdev->mddev, rdev);
471 * When the device is faulty, it is not necessary to
472 * handle write error.
473 * For failfast, this is the only remaining device,
474 * We need to retry the write without FailFast.
476 if (!test_bit(Faulty, &rdev->flags))
477 set_bit(R10BIO_WriteError, &r10_bio->state);
479 r10_bio->devs[slot].bio = NULL;
486 * Set R10BIO_Uptodate in our master bio, so that
487 * we will return a good error code for to the higher
488 * levels even if IO on some other mirrored buffer fails.
490 * The 'master' represents the composite IO operation to
491 * user-side. So if something waits for IO, then it will
492 * wait for the 'master' bio.
498 * Do not set R10BIO_Uptodate if the current device is
499 * rebuilding or Faulty. This is because we cannot use
500 * such device for properly reading the data back (we could
501 * potentially use it, if the current write would have felt
502 * before rdev->recovery_offset, but for simplicity we don't
505 if (test_bit(In_sync, &rdev->flags) &&
506 !test_bit(Faulty, &rdev->flags))
507 set_bit(R10BIO_Uptodate, &r10_bio->state);
509 /* Maybe we can clear some bad blocks. */
510 if (is_badblock(rdev,
511 r10_bio->devs[slot].addr,
513 &first_bad, &bad_sectors) && !discard_error) {
516 r10_bio->devs[slot].repl_bio = IO_MADE_GOOD;
518 r10_bio->devs[slot].bio = IO_MADE_GOOD;
520 set_bit(R10BIO_MadeGood, &r10_bio->state);
526 * Let's see if all mirrored write operations have finished
529 one_write_done(r10_bio);
531 rdev_dec_pending(rdev, conf->mddev);
537 * RAID10 layout manager
538 * As well as the chunksize and raid_disks count, there are two
539 * parameters: near_copies and far_copies.
540 * near_copies * far_copies must be <= raid_disks.
541 * Normally one of these will be 1.
542 * If both are 1, we get raid0.
543 * If near_copies == raid_disks, we get raid1.
545 * Chunks are laid out in raid0 style with near_copies copies of the
546 * first chunk, followed by near_copies copies of the next chunk and
548 * If far_copies > 1, then after 1/far_copies of the array has been assigned
549 * as described above, we start again with a device offset of near_copies.
550 * So we effectively have another copy of the whole array further down all
551 * the drives, but with blocks on different drives.
552 * With this layout, and block is never stored twice on the one device.
554 * raid10_find_phys finds the sector offset of a given virtual sector
555 * on each device that it is on.
557 * raid10_find_virt does the reverse mapping, from a device and a
558 * sector offset to a virtual address
561 static void __raid10_find_phys(struct geom *geo, struct r10bio *r10bio)
569 int last_far_set_start, last_far_set_size;
571 last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
572 last_far_set_start *= geo->far_set_size;
574 last_far_set_size = geo->far_set_size;
575 last_far_set_size += (geo->raid_disks % geo->far_set_size);
577 /* now calculate first sector/dev */
578 chunk = r10bio->sector >> geo->chunk_shift;
579 sector = r10bio->sector & geo->chunk_mask;
581 chunk *= geo->near_copies;
583 dev = sector_div(stripe, geo->raid_disks);
585 stripe *= geo->far_copies;
587 sector += stripe << geo->chunk_shift;
589 /* and calculate all the others */
590 for (n = 0; n < geo->near_copies; n++) {
594 r10bio->devs[slot].devnum = d;
595 r10bio->devs[slot].addr = s;
598 for (f = 1; f < geo->far_copies; f++) {
599 set = d / geo->far_set_size;
600 d += geo->near_copies;
602 if ((geo->raid_disks % geo->far_set_size) &&
603 (d > last_far_set_start)) {
604 d -= last_far_set_start;
605 d %= last_far_set_size;
606 d += last_far_set_start;
608 d %= geo->far_set_size;
609 d += geo->far_set_size * set;
612 r10bio->devs[slot].devnum = d;
613 r10bio->devs[slot].addr = s;
617 if (dev >= geo->raid_disks) {
619 sector += (geo->chunk_mask + 1);
624 static void raid10_find_phys(struct r10conf *conf, struct r10bio *r10bio)
626 struct geom *geo = &conf->geo;
628 if (conf->reshape_progress != MaxSector &&
629 ((r10bio->sector >= conf->reshape_progress) !=
630 conf->mddev->reshape_backwards)) {
631 set_bit(R10BIO_Previous, &r10bio->state);
634 clear_bit(R10BIO_Previous, &r10bio->state);
636 __raid10_find_phys(geo, r10bio);
639 static sector_t raid10_find_virt(struct r10conf *conf, sector_t sector, int dev)
641 sector_t offset, chunk, vchunk;
642 /* Never use conf->prev as this is only called during resync
643 * or recovery, so reshape isn't happening
645 struct geom *geo = &conf->geo;
646 int far_set_start = (dev / geo->far_set_size) * geo->far_set_size;
647 int far_set_size = geo->far_set_size;
648 int last_far_set_start;
650 if (geo->raid_disks % geo->far_set_size) {
651 last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
652 last_far_set_start *= geo->far_set_size;
654 if (dev >= last_far_set_start) {
655 far_set_size = geo->far_set_size;
656 far_set_size += (geo->raid_disks % geo->far_set_size);
657 far_set_start = last_far_set_start;
661 offset = sector & geo->chunk_mask;
662 if (geo->far_offset) {
664 chunk = sector >> geo->chunk_shift;
665 fc = sector_div(chunk, geo->far_copies);
666 dev -= fc * geo->near_copies;
667 if (dev < far_set_start)
670 while (sector >= geo->stride) {
671 sector -= geo->stride;
672 if (dev < (geo->near_copies + far_set_start))
673 dev += far_set_size - geo->near_copies;
675 dev -= geo->near_copies;
677 chunk = sector >> geo->chunk_shift;
679 vchunk = chunk * geo->raid_disks + dev;
680 sector_div(vchunk, geo->near_copies);
681 return (vchunk << geo->chunk_shift) + offset;
685 * This routine returns the disk from which the requested read should
686 * be done. There is a per-array 'next expected sequential IO' sector
687 * number - if this matches on the next IO then we use the last disk.
688 * There is also a per-disk 'last know head position' sector that is
689 * maintained from IRQ contexts, both the normal and the resync IO
690 * completion handlers update this position correctly. If there is no
691 * perfect sequential match then we pick the disk whose head is closest.
693 * If there are 2 mirrors in the same 2 devices, performance degrades
694 * because position is mirror, not device based.
696 * The rdev for the device selected will have nr_pending incremented.
700 * FIXME: possibly should rethink readbalancing and do it differently
701 * depending on near_copies / far_copies geometry.
703 static struct md_rdev *read_balance(struct r10conf *conf,
704 struct r10bio *r10_bio,
707 const sector_t this_sector = r10_bio->sector;
709 int sectors = r10_bio->sectors;
710 int best_good_sectors;
711 sector_t new_distance, best_dist;
712 struct md_rdev *best_dist_rdev, *best_pending_rdev, *rdev = NULL;
714 int best_dist_slot, best_pending_slot;
715 bool has_nonrot_disk = false;
716 unsigned int min_pending;
717 struct geom *geo = &conf->geo;
719 raid10_find_phys(conf, r10_bio);
722 min_pending = UINT_MAX;
723 best_dist_rdev = NULL;
724 best_pending_rdev = NULL;
725 best_dist = MaxSector;
726 best_good_sectors = 0;
728 clear_bit(R10BIO_FailFast, &r10_bio->state);
730 * Check if we can balance. We can balance on the whole
731 * device if no resync is going on (recovery is ok), or below
732 * the resync window. We take the first readable disk when
733 * above the resync window.
735 if ((conf->mddev->recovery_cp < MaxSector
736 && (this_sector + sectors >= conf->next_resync)) ||
737 (mddev_is_clustered(conf->mddev) &&
738 md_cluster_ops->area_resyncing(conf->mddev, READ, this_sector,
739 this_sector + sectors)))
742 for (slot = 0; slot < conf->copies ; slot++) {
746 unsigned int pending;
749 if (r10_bio->devs[slot].bio == IO_BLOCKED)
751 disk = r10_bio->devs[slot].devnum;
752 rdev = rcu_dereference(conf->mirrors[disk].replacement);
753 if (rdev == NULL || test_bit(Faulty, &rdev->flags) ||
754 r10_bio->devs[slot].addr + sectors > rdev->recovery_offset)
755 rdev = rcu_dereference(conf->mirrors[disk].rdev);
757 test_bit(Faulty, &rdev->flags))
759 if (!test_bit(In_sync, &rdev->flags) &&
760 r10_bio->devs[slot].addr + sectors > rdev->recovery_offset)
763 dev_sector = r10_bio->devs[slot].addr;
764 if (is_badblock(rdev, dev_sector, sectors,
765 &first_bad, &bad_sectors)) {
766 if (best_dist < MaxSector)
767 /* Already have a better slot */
769 if (first_bad <= dev_sector) {
770 /* Cannot read here. If this is the
771 * 'primary' device, then we must not read
772 * beyond 'bad_sectors' from another device.
774 bad_sectors -= (dev_sector - first_bad);
775 if (!do_balance && sectors > bad_sectors)
776 sectors = bad_sectors;
777 if (best_good_sectors > sectors)
778 best_good_sectors = sectors;
780 sector_t good_sectors =
781 first_bad - dev_sector;
782 if (good_sectors > best_good_sectors) {
783 best_good_sectors = good_sectors;
784 best_dist_slot = slot;
785 best_dist_rdev = rdev;
788 /* Must read from here */
793 best_good_sectors = sectors;
798 nonrot = blk_queue_nonrot(bdev_get_queue(rdev->bdev));
799 has_nonrot_disk |= nonrot;
800 pending = atomic_read(&rdev->nr_pending);
801 if (min_pending > pending && nonrot) {
802 min_pending = pending;
803 best_pending_slot = slot;
804 best_pending_rdev = rdev;
807 if (best_dist_slot >= 0)
808 /* At least 2 disks to choose from so failfast is OK */
809 set_bit(R10BIO_FailFast, &r10_bio->state);
810 /* This optimisation is debatable, and completely destroys
811 * sequential read speed for 'far copies' arrays. So only
812 * keep it for 'near' arrays, and review those later.
814 if (geo->near_copies > 1 && !pending)
817 /* for far > 1 always use the lowest address */
818 else if (geo->far_copies > 1)
819 new_distance = r10_bio->devs[slot].addr;
821 new_distance = abs(r10_bio->devs[slot].addr -
822 conf->mirrors[disk].head_position);
824 if (new_distance < best_dist) {
825 best_dist = new_distance;
826 best_dist_slot = slot;
827 best_dist_rdev = rdev;
830 if (slot >= conf->copies) {
831 if (has_nonrot_disk) {
832 slot = best_pending_slot;
833 rdev = best_pending_rdev;
835 slot = best_dist_slot;
836 rdev = best_dist_rdev;
841 atomic_inc(&rdev->nr_pending);
842 r10_bio->read_slot = slot;
846 *max_sectors = best_good_sectors;
851 static int raid10_congested(struct mddev *mddev, int bits)
853 struct r10conf *conf = mddev->private;
856 if ((bits & (1 << WB_async_congested)) &&
857 conf->pending_count >= max_queued_requests)
862 (i < conf->geo.raid_disks || i < conf->prev.raid_disks)
865 struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
866 if (rdev && !test_bit(Faulty, &rdev->flags)) {
867 struct request_queue *q = bdev_get_queue(rdev->bdev);
869 ret |= bdi_congested(q->backing_dev_info, bits);
876 static void flush_pending_writes(struct r10conf *conf)
878 /* Any writes that have been queued but are awaiting
879 * bitmap updates get flushed here.
881 spin_lock_irq(&conf->device_lock);
883 if (conf->pending_bio_list.head) {
884 struct blk_plug plug;
887 bio = bio_list_get(&conf->pending_bio_list);
888 conf->pending_count = 0;
889 spin_unlock_irq(&conf->device_lock);
892 * As this is called in a wait_event() loop (see freeze_array),
893 * current->state might be TASK_UNINTERRUPTIBLE which will
894 * cause a warning when we prepare to wait again. As it is
895 * rare that this path is taken, it is perfectly safe to force
896 * us to go around the wait_event() loop again, so the warning
897 * is a false-positive. Silence the warning by resetting
900 __set_current_state(TASK_RUNNING);
902 blk_start_plug(&plug);
903 /* flush any pending bitmap writes to disk
904 * before proceeding w/ I/O */
905 md_bitmap_unplug(conf->mddev->bitmap);
906 wake_up(&conf->wait_barrier);
908 while (bio) { /* submit pending writes */
909 struct bio *next = bio->bi_next;
910 struct md_rdev *rdev = (void*)bio->bi_disk;
912 bio_set_dev(bio, rdev->bdev);
913 if (test_bit(Faulty, &rdev->flags)) {
915 } else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
916 !blk_queue_discard(bio->bi_disk->queue)))
920 generic_make_request(bio);
923 blk_finish_plug(&plug);
925 spin_unlock_irq(&conf->device_lock);
929 * Sometimes we need to suspend IO while we do something else,
930 * either some resync/recovery, or reconfigure the array.
931 * To do this we raise a 'barrier'.
932 * The 'barrier' is a counter that can be raised multiple times
933 * to count how many activities are happening which preclude
935 * We can only raise the barrier if there is no pending IO.
936 * i.e. if nr_pending == 0.
937 * We choose only to raise the barrier if no-one is waiting for the
938 * barrier to go down. This means that as soon as an IO request
939 * is ready, no other operations which require a barrier will start
940 * until the IO request has had a chance.
942 * So: regular IO calls 'wait_barrier'. When that returns there
943 * is no backgroup IO happening, It must arrange to call
944 * allow_barrier when it has finished its IO.
945 * backgroup IO calls must call raise_barrier. Once that returns
946 * there is no normal IO happeing. It must arrange to call
947 * lower_barrier when the particular background IO completes.
950 static void raise_barrier(struct r10conf *conf, int force)
952 BUG_ON(force && !conf->barrier);
953 spin_lock_irq(&conf->resync_lock);
955 /* Wait until no block IO is waiting (unless 'force') */
956 wait_event_lock_irq(conf->wait_barrier, force || !conf->nr_waiting,
959 /* block any new IO from starting */
962 /* Now wait for all pending IO to complete */
963 wait_event_lock_irq(conf->wait_barrier,
964 !atomic_read(&conf->nr_pending) && conf->barrier < RESYNC_DEPTH,
967 spin_unlock_irq(&conf->resync_lock);
970 static void lower_barrier(struct r10conf *conf)
973 spin_lock_irqsave(&conf->resync_lock, flags);
975 spin_unlock_irqrestore(&conf->resync_lock, flags);
976 wake_up(&conf->wait_barrier);
979 static void wait_barrier(struct r10conf *conf)
981 spin_lock_irq(&conf->resync_lock);
984 /* Wait for the barrier to drop.
985 * However if there are already pending
986 * requests (preventing the barrier from
987 * rising completely), and the
988 * pre-process bio queue isn't empty,
989 * then don't wait, as we need to empty
990 * that queue to get the nr_pending
993 raid10_log(conf->mddev, "wait barrier");
994 wait_event_lock_irq(conf->wait_barrier,
996 (atomic_read(&conf->nr_pending) &&
998 (!bio_list_empty(¤t->bio_list[0]) ||
999 !bio_list_empty(¤t->bio_list[1]))),
1002 if (!conf->nr_waiting)
1003 wake_up(&conf->wait_barrier);
1005 atomic_inc(&conf->nr_pending);
1006 spin_unlock_irq(&conf->resync_lock);
1009 static void allow_barrier(struct r10conf *conf)
1011 if ((atomic_dec_and_test(&conf->nr_pending)) ||
1012 (conf->array_freeze_pending))
1013 wake_up(&conf->wait_barrier);
1016 static void freeze_array(struct r10conf *conf, int extra)
1018 /* stop syncio and normal IO and wait for everything to
1020 * We increment barrier and nr_waiting, and then
1021 * wait until nr_pending match nr_queued+extra
1022 * This is called in the context of one normal IO request
1023 * that has failed. Thus any sync request that might be pending
1024 * will be blocked by nr_pending, and we need to wait for
1025 * pending IO requests to complete or be queued for re-try.
1026 * Thus the number queued (nr_queued) plus this request (extra)
1027 * must match the number of pending IOs (nr_pending) before
1030 spin_lock_irq(&conf->resync_lock);
1031 conf->array_freeze_pending++;
1034 wait_event_lock_irq_cmd(conf->wait_barrier,
1035 atomic_read(&conf->nr_pending) == conf->nr_queued+extra,
1037 flush_pending_writes(conf));
1039 conf->array_freeze_pending--;
1040 spin_unlock_irq(&conf->resync_lock);
1043 static void unfreeze_array(struct r10conf *conf)
1045 /* reverse the effect of the freeze */
1046 spin_lock_irq(&conf->resync_lock);
1049 wake_up(&conf->wait_barrier);
1050 spin_unlock_irq(&conf->resync_lock);
1053 static sector_t choose_data_offset(struct r10bio *r10_bio,
1054 struct md_rdev *rdev)
1056 if (!test_bit(MD_RECOVERY_RESHAPE, &rdev->mddev->recovery) ||
1057 test_bit(R10BIO_Previous, &r10_bio->state))
1058 return rdev->data_offset;
1060 return rdev->new_data_offset;
1063 struct raid10_plug_cb {
1064 struct blk_plug_cb cb;
1065 struct bio_list pending;
1069 static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
1071 struct raid10_plug_cb *plug = container_of(cb, struct raid10_plug_cb,
1073 struct mddev *mddev = plug->cb.data;
1074 struct r10conf *conf = mddev->private;
1077 if (from_schedule || current->bio_list) {
1078 spin_lock_irq(&conf->device_lock);
1079 bio_list_merge(&conf->pending_bio_list, &plug->pending);
1080 conf->pending_count += plug->pending_cnt;
1081 spin_unlock_irq(&conf->device_lock);
1082 wake_up(&conf->wait_barrier);
1083 md_wakeup_thread(mddev->thread);
1088 /* we aren't scheduling, so we can do the write-out directly. */
1089 bio = bio_list_get(&plug->pending);
1090 md_bitmap_unplug(mddev->bitmap);
1091 wake_up(&conf->wait_barrier);
1093 while (bio) { /* submit pending writes */
1094 struct bio *next = bio->bi_next;
1095 struct md_rdev *rdev = (void*)bio->bi_disk;
1096 bio->bi_next = NULL;
1097 bio_set_dev(bio, rdev->bdev);
1098 if (test_bit(Faulty, &rdev->flags)) {
1100 } else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
1101 !blk_queue_discard(bio->bi_disk->queue)))
1102 /* Just ignore it */
1105 generic_make_request(bio);
1112 * 1. Register the new request and wait if the reconstruction thread has put
1113 * up a bar for new requests. Continue immediately if no resync is active
1115 * 2. If IO spans the reshape position. Need to wait for reshape to pass.
1117 static void regular_request_wait(struct mddev *mddev, struct r10conf *conf,
1118 struct bio *bio, sector_t sectors)
1121 while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
1122 bio->bi_iter.bi_sector < conf->reshape_progress &&
1123 bio->bi_iter.bi_sector + sectors > conf->reshape_progress) {
1124 raid10_log(conf->mddev, "wait reshape");
1125 allow_barrier(conf);
1126 wait_event(conf->wait_barrier,
1127 conf->reshape_progress <= bio->bi_iter.bi_sector ||
1128 conf->reshape_progress >= bio->bi_iter.bi_sector +
1134 static void raid10_read_request(struct mddev *mddev, struct bio *bio,
1135 struct r10bio *r10_bio)
1137 struct r10conf *conf = mddev->private;
1138 struct bio *read_bio;
1139 const int op = bio_op(bio);
1140 const unsigned long do_sync = (bio->bi_opf & REQ_SYNC);
1142 struct md_rdev *rdev;
1143 char b[BDEVNAME_SIZE];
1144 int slot = r10_bio->read_slot;
1145 struct md_rdev *err_rdev = NULL;
1146 gfp_t gfp = GFP_NOIO;
1148 if (r10_bio->devs[slot].rdev) {
1150 * This is an error retry, but we cannot
1151 * safely dereference the rdev in the r10_bio,
1152 * we must use the one in conf.
1153 * If it has already been disconnected (unlikely)
1154 * we lose the device name in error messages.
1158 * As we are blocking raid10, it is a little safer to
1161 gfp = GFP_NOIO | __GFP_HIGH;
1164 disk = r10_bio->devs[slot].devnum;
1165 err_rdev = rcu_dereference(conf->mirrors[disk].rdev);
1167 bdevname(err_rdev->bdev, b);
1170 /* This never gets dereferenced */
1171 err_rdev = r10_bio->devs[slot].rdev;
1176 regular_request_wait(mddev, conf, bio, r10_bio->sectors);
1177 rdev = read_balance(conf, r10_bio, &max_sectors);
1180 pr_crit_ratelimited("md/raid10:%s: %s: unrecoverable I/O read error for block %llu\n",
1182 (unsigned long long)r10_bio->sector);
1184 raid_end_bio_io(r10_bio);
1188 pr_err_ratelimited("md/raid10:%s: %s: redirecting sector %llu to another mirror\n",
1190 bdevname(rdev->bdev, b),
1191 (unsigned long long)r10_bio->sector);
1192 if (max_sectors < bio_sectors(bio)) {
1193 struct bio *split = bio_split(bio, max_sectors,
1194 gfp, &conf->bio_split);
1195 bio_chain(split, bio);
1196 allow_barrier(conf);
1197 generic_make_request(bio);
1200 r10_bio->master_bio = bio;
1201 r10_bio->sectors = max_sectors;
1203 slot = r10_bio->read_slot;
1205 read_bio = bio_clone_fast(bio, gfp, &mddev->bio_set);
1207 r10_bio->devs[slot].bio = read_bio;
1208 r10_bio->devs[slot].rdev = rdev;
1210 read_bio->bi_iter.bi_sector = r10_bio->devs[slot].addr +
1211 choose_data_offset(r10_bio, rdev);
1212 bio_set_dev(read_bio, rdev->bdev);
1213 read_bio->bi_end_io = raid10_end_read_request;
1214 bio_set_op_attrs(read_bio, op, do_sync);
1215 if (test_bit(FailFast, &rdev->flags) &&
1216 test_bit(R10BIO_FailFast, &r10_bio->state))
1217 read_bio->bi_opf |= MD_FAILFAST;
1218 read_bio->bi_private = r10_bio;
1221 trace_block_bio_remap(read_bio->bi_disk->queue,
1222 read_bio, disk_devt(mddev->gendisk),
1224 generic_make_request(read_bio);
1228 static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
1229 struct bio *bio, bool replacement,
1232 const int op = bio_op(bio);
1233 const unsigned long do_sync = (bio->bi_opf & REQ_SYNC);
1234 const unsigned long do_fua = (bio->bi_opf & REQ_FUA);
1235 unsigned long flags;
1236 struct blk_plug_cb *cb;
1237 struct raid10_plug_cb *plug = NULL;
1238 struct r10conf *conf = mddev->private;
1239 struct md_rdev *rdev;
1240 int devnum = r10_bio->devs[n_copy].devnum;
1244 rdev = conf->mirrors[devnum].replacement;
1246 /* Replacement just got moved to main 'rdev' */
1248 rdev = conf->mirrors[devnum].rdev;
1251 rdev = conf->mirrors[devnum].rdev;
1253 mbio = bio_clone_fast(bio, GFP_NOIO, &mddev->bio_set);
1255 r10_bio->devs[n_copy].repl_bio = mbio;
1257 r10_bio->devs[n_copy].bio = mbio;
1259 mbio->bi_iter.bi_sector = (r10_bio->devs[n_copy].addr +
1260 choose_data_offset(r10_bio, rdev));
1261 bio_set_dev(mbio, rdev->bdev);
1262 mbio->bi_end_io = raid10_end_write_request;
1263 bio_set_op_attrs(mbio, op, do_sync | do_fua);
1264 if (!replacement && test_bit(FailFast,
1265 &conf->mirrors[devnum].rdev->flags)
1266 && enough(conf, devnum))
1267 mbio->bi_opf |= MD_FAILFAST;
1268 mbio->bi_private = r10_bio;
1270 if (conf->mddev->gendisk)
1271 trace_block_bio_remap(mbio->bi_disk->queue,
1272 mbio, disk_devt(conf->mddev->gendisk),
1274 /* flush_pending_writes() needs access to the rdev so...*/
1275 mbio->bi_disk = (void *)rdev;
1277 atomic_inc(&r10_bio->remaining);
1279 cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
1281 plug = container_of(cb, struct raid10_plug_cb, cb);
1285 bio_list_add(&plug->pending, mbio);
1286 plug->pending_cnt++;
1288 spin_lock_irqsave(&conf->device_lock, flags);
1289 bio_list_add(&conf->pending_bio_list, mbio);
1290 conf->pending_count++;
1291 spin_unlock_irqrestore(&conf->device_lock, flags);
1292 md_wakeup_thread(mddev->thread);
1296 static void raid10_write_request(struct mddev *mddev, struct bio *bio,
1297 struct r10bio *r10_bio)
1299 struct r10conf *conf = mddev->private;
1301 struct md_rdev *blocked_rdev;
1305 if ((mddev_is_clustered(mddev) &&
1306 md_cluster_ops->area_resyncing(mddev, WRITE,
1307 bio->bi_iter.bi_sector,
1308 bio_end_sector(bio)))) {
1311 prepare_to_wait(&conf->wait_barrier,
1313 if (!md_cluster_ops->area_resyncing(mddev, WRITE,
1314 bio->bi_iter.bi_sector, bio_end_sector(bio)))
1318 finish_wait(&conf->wait_barrier, &w);
1321 sectors = r10_bio->sectors;
1322 regular_request_wait(mddev, conf, bio, sectors);
1323 if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
1324 (mddev->reshape_backwards
1325 ? (bio->bi_iter.bi_sector < conf->reshape_safe &&
1326 bio->bi_iter.bi_sector + sectors > conf->reshape_progress)
1327 : (bio->bi_iter.bi_sector + sectors > conf->reshape_safe &&
1328 bio->bi_iter.bi_sector < conf->reshape_progress))) {
1329 /* Need to update reshape_position in metadata */
1330 mddev->reshape_position = conf->reshape_progress;
1331 set_mask_bits(&mddev->sb_flags, 0,
1332 BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
1333 md_wakeup_thread(mddev->thread);
1334 raid10_log(conf->mddev, "wait reshape metadata");
1335 wait_event(mddev->sb_wait,
1336 !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
1338 conf->reshape_safe = mddev->reshape_position;
1341 if (conf->pending_count >= max_queued_requests) {
1342 md_wakeup_thread(mddev->thread);
1343 raid10_log(mddev, "wait queued");
1344 wait_event(conf->wait_barrier,
1345 conf->pending_count < max_queued_requests);
1347 /* first select target devices under rcu_lock and
1348 * inc refcount on their rdev. Record them by setting
1350 * If there are known/acknowledged bad blocks on any device
1351 * on which we have seen a write error, we want to avoid
1352 * writing to those blocks. This potentially requires several
1353 * writes to write around the bad blocks. Each set of writes
1354 * gets its own r10_bio with a set of bios attached.
1357 r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
1358 raid10_find_phys(conf, r10_bio);
1360 blocked_rdev = NULL;
1362 max_sectors = r10_bio->sectors;
1364 for (i = 0; i < conf->copies; i++) {
1365 int d = r10_bio->devs[i].devnum;
1366 struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
1367 struct md_rdev *rrdev = rcu_dereference(
1368 conf->mirrors[d].replacement);
1371 if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
1372 atomic_inc(&rdev->nr_pending);
1373 blocked_rdev = rdev;
1376 if (rrdev && unlikely(test_bit(Blocked, &rrdev->flags))) {
1377 atomic_inc(&rrdev->nr_pending);
1378 blocked_rdev = rrdev;
1381 if (rdev && (test_bit(Faulty, &rdev->flags)))
1383 if (rrdev && (test_bit(Faulty, &rrdev->flags)))
1386 r10_bio->devs[i].bio = NULL;
1387 r10_bio->devs[i].repl_bio = NULL;
1389 if (!rdev && !rrdev) {
1390 set_bit(R10BIO_Degraded, &r10_bio->state);
1393 if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
1395 sector_t dev_sector = r10_bio->devs[i].addr;
1399 is_bad = is_badblock(rdev, dev_sector, max_sectors,
1400 &first_bad, &bad_sectors);
1402 /* Mustn't write here until the bad block
1405 atomic_inc(&rdev->nr_pending);
1406 set_bit(BlockedBadBlocks, &rdev->flags);
1407 blocked_rdev = rdev;
1410 if (is_bad && first_bad <= dev_sector) {
1411 /* Cannot write here at all */
1412 bad_sectors -= (dev_sector - first_bad);
1413 if (bad_sectors < max_sectors)
1414 /* Mustn't write more than bad_sectors
1415 * to other devices yet
1417 max_sectors = bad_sectors;
1418 /* We don't set R10BIO_Degraded as that
1419 * only applies if the disk is missing,
1420 * so it might be re-added, and we want to
1421 * know to recover this chunk.
1422 * In this case the device is here, and the
1423 * fact that this chunk is not in-sync is
1424 * recorded in the bad block log.
1429 int good_sectors = first_bad - dev_sector;
1430 if (good_sectors < max_sectors)
1431 max_sectors = good_sectors;
1435 r10_bio->devs[i].bio = bio;
1436 atomic_inc(&rdev->nr_pending);
1439 r10_bio->devs[i].repl_bio = bio;
1440 atomic_inc(&rrdev->nr_pending);
1445 if (unlikely(blocked_rdev)) {
1446 /* Have to wait for this device to get unblocked, then retry */
1450 for (j = 0; j < i; j++) {
1451 if (r10_bio->devs[j].bio) {
1452 d = r10_bio->devs[j].devnum;
1453 rdev_dec_pending(conf->mirrors[d].rdev, mddev);
1455 if (r10_bio->devs[j].repl_bio) {
1456 struct md_rdev *rdev;
1457 d = r10_bio->devs[j].devnum;
1458 rdev = conf->mirrors[d].replacement;
1460 /* Race with remove_disk */
1462 rdev = conf->mirrors[d].rdev;
1464 rdev_dec_pending(rdev, mddev);
1467 allow_barrier(conf);
1468 raid10_log(conf->mddev, "wait rdev %d blocked", blocked_rdev->raid_disk);
1469 md_wait_for_blocked_rdev(blocked_rdev, mddev);
1474 if (max_sectors < r10_bio->sectors)
1475 r10_bio->sectors = max_sectors;
1477 if (r10_bio->sectors < bio_sectors(bio)) {
1478 struct bio *split = bio_split(bio, r10_bio->sectors,
1479 GFP_NOIO, &conf->bio_split);
1480 bio_chain(split, bio);
1481 allow_barrier(conf);
1482 generic_make_request(bio);
1485 r10_bio->master_bio = bio;
1488 atomic_set(&r10_bio->remaining, 1);
1489 md_bitmap_startwrite(mddev->bitmap, r10_bio->sector, r10_bio->sectors, 0);
1491 for (i = 0; i < conf->copies; i++) {
1492 if (r10_bio->devs[i].bio)
1493 raid10_write_one_disk(mddev, r10_bio, bio, false, i);
1494 if (r10_bio->devs[i].repl_bio)
1495 raid10_write_one_disk(mddev, r10_bio, bio, true, i);
1497 one_write_done(r10_bio);
1500 static void __make_request(struct mddev *mddev, struct bio *bio, int sectors)
1502 struct r10conf *conf = mddev->private;
1503 struct r10bio *r10_bio;
1505 r10_bio = mempool_alloc(&conf->r10bio_pool, GFP_NOIO);
1507 r10_bio->master_bio = bio;
1508 r10_bio->sectors = sectors;
1510 r10_bio->mddev = mddev;
1511 r10_bio->sector = bio->bi_iter.bi_sector;
1513 memset(r10_bio->devs, 0, sizeof(r10_bio->devs[0]) * conf->copies);
1515 if (bio_data_dir(bio) == READ)
1516 raid10_read_request(mddev, bio, r10_bio);
1518 raid10_write_request(mddev, bio, r10_bio);
1521 static bool raid10_make_request(struct mddev *mddev, struct bio *bio)
1523 struct r10conf *conf = mddev->private;
1524 sector_t chunk_mask = (conf->geo.chunk_mask & conf->prev.chunk_mask);
1525 int chunk_sects = chunk_mask + 1;
1526 int sectors = bio_sectors(bio);
1528 if (unlikely(bio->bi_opf & REQ_PREFLUSH)) {
1529 md_flush_request(mddev, bio);
1533 if (!md_write_start(mddev, bio))
1537 * If this request crosses a chunk boundary, we need to split
1540 if (unlikely((bio->bi_iter.bi_sector & chunk_mask) +
1541 sectors > chunk_sects
1542 && (conf->geo.near_copies < conf->geo.raid_disks
1543 || conf->prev.near_copies <
1544 conf->prev.raid_disks)))
1545 sectors = chunk_sects -
1546 (bio->bi_iter.bi_sector &
1548 __make_request(mddev, bio, sectors);
1550 /* In case raid10d snuck in to freeze_array */
1551 wake_up(&conf->wait_barrier);
1555 static void raid10_status(struct seq_file *seq, struct mddev *mddev)
1557 struct r10conf *conf = mddev->private;
1560 if (conf->geo.near_copies < conf->geo.raid_disks)
1561 seq_printf(seq, " %dK chunks", mddev->chunk_sectors / 2);
1562 if (conf->geo.near_copies > 1)
1563 seq_printf(seq, " %d near-copies", conf->geo.near_copies);
1564 if (conf->geo.far_copies > 1) {
1565 if (conf->geo.far_offset)
1566 seq_printf(seq, " %d offset-copies", conf->geo.far_copies);
1568 seq_printf(seq, " %d far-copies", conf->geo.far_copies);
1569 if (conf->geo.far_set_size != conf->geo.raid_disks)
1570 seq_printf(seq, " %d devices per set", conf->geo.far_set_size);
1572 seq_printf(seq, " [%d/%d] [", conf->geo.raid_disks,
1573 conf->geo.raid_disks - mddev->degraded);
1575 for (i = 0; i < conf->geo.raid_disks; i++) {
1576 struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
1577 seq_printf(seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
1580 seq_printf(seq, "]");
1583 /* check if there are enough drives for
1584 * every block to appear on atleast one.
1585 * Don't consider the device numbered 'ignore'
1586 * as we might be about to remove it.
1588 static int _enough(struct r10conf *conf, int previous, int ignore)
1594 disks = conf->prev.raid_disks;
1595 ncopies = conf->prev.near_copies;
1597 disks = conf->geo.raid_disks;
1598 ncopies = conf->geo.near_copies;
1603 int n = conf->copies;
1607 struct md_rdev *rdev;
1608 if (this != ignore &&
1609 (rdev = rcu_dereference(conf->mirrors[this].rdev)) &&
1610 test_bit(In_sync, &rdev->flags))
1612 this = (this+1) % disks;
1616 first = (first + ncopies) % disks;
1617 } while (first != 0);
1624 static int enough(struct r10conf *conf, int ignore)
1626 /* when calling 'enough', both 'prev' and 'geo' must
1628 * This is ensured if ->reconfig_mutex or ->device_lock
1631 return _enough(conf, 0, ignore) &&
1632 _enough(conf, 1, ignore);
1635 static void raid10_error(struct mddev *mddev, struct md_rdev *rdev)
1637 char b[BDEVNAME_SIZE];
1638 struct r10conf *conf = mddev->private;
1639 unsigned long flags;
1642 * If it is not operational, then we have already marked it as dead
1643 * else if it is the last working disks with "fail_last_dev == false",
1644 * ignore the error, let the next level up know.
1645 * else mark the drive as failed
1647 spin_lock_irqsave(&conf->device_lock, flags);
1648 if (test_bit(In_sync, &rdev->flags) && !mddev->fail_last_dev
1649 && !enough(conf, rdev->raid_disk)) {
1651 * Don't fail the drive, just return an IO error.
1653 spin_unlock_irqrestore(&conf->device_lock, flags);
1656 if (test_and_clear_bit(In_sync, &rdev->flags))
1659 * If recovery is running, make sure it aborts.
1661 set_bit(MD_RECOVERY_INTR, &mddev->recovery);
1662 set_bit(Blocked, &rdev->flags);
1663 set_bit(Faulty, &rdev->flags);
1664 set_mask_bits(&mddev->sb_flags, 0,
1665 BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
1666 spin_unlock_irqrestore(&conf->device_lock, flags);
1667 pr_crit("md/raid10:%s: Disk failure on %s, disabling device.\n"
1668 "md/raid10:%s: Operation continuing on %d devices.\n",
1669 mdname(mddev), bdevname(rdev->bdev, b),
1670 mdname(mddev), conf->geo.raid_disks - mddev->degraded);
1673 static void print_conf(struct r10conf *conf)
1676 struct md_rdev *rdev;
1678 pr_debug("RAID10 conf printout:\n");
1680 pr_debug("(!conf)\n");
1683 pr_debug(" --- wd:%d rd:%d\n", conf->geo.raid_disks - conf->mddev->degraded,
1684 conf->geo.raid_disks);
1686 /* This is only called with ->reconfix_mutex held, so
1687 * rcu protection of rdev is not needed */
1688 for (i = 0; i < conf->geo.raid_disks; i++) {
1689 char b[BDEVNAME_SIZE];
1690 rdev = conf->mirrors[i].rdev;
1692 pr_debug(" disk %d, wo:%d, o:%d, dev:%s\n",
1693 i, !test_bit(In_sync, &rdev->flags),
1694 !test_bit(Faulty, &rdev->flags),
1695 bdevname(rdev->bdev,b));
1699 static void close_sync(struct r10conf *conf)
1702 allow_barrier(conf);
1704 mempool_exit(&conf->r10buf_pool);
1707 static int raid10_spare_active(struct mddev *mddev)
1710 struct r10conf *conf = mddev->private;
1711 struct raid10_info *tmp;
1713 unsigned long flags;
1716 * Find all non-in_sync disks within the RAID10 configuration
1717 * and mark them in_sync
1719 for (i = 0; i < conf->geo.raid_disks; i++) {
1720 tmp = conf->mirrors + i;
1721 if (tmp->replacement
1722 && tmp->replacement->recovery_offset == MaxSector
1723 && !test_bit(Faulty, &tmp->replacement->flags)
1724 && !test_and_set_bit(In_sync, &tmp->replacement->flags)) {
1725 /* Replacement has just become active */
1727 || !test_and_clear_bit(In_sync, &tmp->rdev->flags))
1730 /* Replaced device not technically faulty,
1731 * but we need to be sure it gets removed
1732 * and never re-added.
1734 set_bit(Faulty, &tmp->rdev->flags);
1735 sysfs_notify_dirent_safe(
1736 tmp->rdev->sysfs_state);
1738 sysfs_notify_dirent_safe(tmp->replacement->sysfs_state);
1739 } else if (tmp->rdev
1740 && tmp->rdev->recovery_offset == MaxSector
1741 && !test_bit(Faulty, &tmp->rdev->flags)
1742 && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
1744 sysfs_notify_dirent_safe(tmp->rdev->sysfs_state);
1747 spin_lock_irqsave(&conf->device_lock, flags);
1748 mddev->degraded -= count;
1749 spin_unlock_irqrestore(&conf->device_lock, flags);
1755 static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev)
1757 struct r10conf *conf = mddev->private;
1761 int last = conf->geo.raid_disks - 1;
1763 if (mddev->recovery_cp < MaxSector)
1764 /* only hot-add to in-sync arrays, as recovery is
1765 * very different from resync
1768 if (rdev->saved_raid_disk < 0 && !_enough(conf, 1, -1))
1771 if (md_integrity_add_rdev(rdev, mddev))
1774 if (rdev->raid_disk >= 0)
1775 first = last = rdev->raid_disk;
1777 if (rdev->saved_raid_disk >= first &&
1778 rdev->saved_raid_disk < conf->geo.raid_disks &&
1779 conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
1780 mirror = rdev->saved_raid_disk;
1783 for ( ; mirror <= last ; mirror++) {
1784 struct raid10_info *p = &conf->mirrors[mirror];
1785 if (p->recovery_disabled == mddev->recovery_disabled)
1788 if (!test_bit(WantReplacement, &p->rdev->flags) ||
1789 p->replacement != NULL)
1791 clear_bit(In_sync, &rdev->flags);
1792 set_bit(Replacement, &rdev->flags);
1793 rdev->raid_disk = mirror;
1796 disk_stack_limits(mddev->gendisk, rdev->bdev,
1797 rdev->data_offset << 9);
1799 rcu_assign_pointer(p->replacement, rdev);
1804 disk_stack_limits(mddev->gendisk, rdev->bdev,
1805 rdev->data_offset << 9);
1807 p->head_position = 0;
1808 p->recovery_disabled = mddev->recovery_disabled - 1;
1809 rdev->raid_disk = mirror;
1811 if (rdev->saved_raid_disk != mirror)
1813 rcu_assign_pointer(p->rdev, rdev);
1816 if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev)))
1817 blk_queue_flag_set(QUEUE_FLAG_DISCARD, mddev->queue);
1823 static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
1825 struct r10conf *conf = mddev->private;
1827 int number = rdev->raid_disk;
1828 struct md_rdev **rdevp;
1829 struct raid10_info *p = conf->mirrors + number;
1832 if (rdev == p->rdev)
1834 else if (rdev == p->replacement)
1835 rdevp = &p->replacement;
1839 if (test_bit(In_sync, &rdev->flags) ||
1840 atomic_read(&rdev->nr_pending)) {
1844 /* Only remove non-faulty devices if recovery
1847 if (!test_bit(Faulty, &rdev->flags) &&
1848 mddev->recovery_disabled != p->recovery_disabled &&
1849 (!p->replacement || p->replacement == rdev) &&
1850 number < conf->geo.raid_disks &&
1856 if (!test_bit(RemoveSynchronized, &rdev->flags)) {
1858 if (atomic_read(&rdev->nr_pending)) {
1859 /* lost the race, try later */
1865 if (p->replacement) {
1866 /* We must have just cleared 'rdev' */
1867 p->rdev = p->replacement;
1868 clear_bit(Replacement, &p->replacement->flags);
1869 smp_mb(); /* Make sure other CPUs may see both as identical
1870 * but will never see neither -- if they are careful.
1872 p->replacement = NULL;
1875 clear_bit(WantReplacement, &rdev->flags);
1876 err = md_integrity_register(mddev);
1884 static void __end_sync_read(struct r10bio *r10_bio, struct bio *bio, int d)
1886 struct r10conf *conf = r10_bio->mddev->private;
1888 if (!bio->bi_status)
1889 set_bit(R10BIO_Uptodate, &r10_bio->state);
1891 /* The write handler will notice the lack of
1892 * R10BIO_Uptodate and record any errors etc
1894 atomic_add(r10_bio->sectors,
1895 &conf->mirrors[d].rdev->corrected_errors);
1897 /* for reconstruct, we always reschedule after a read.
1898 * for resync, only after all reads
1900 rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
1901 if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
1902 atomic_dec_and_test(&r10_bio->remaining)) {
1903 /* we have read all the blocks,
1904 * do the comparison in process context in raid10d
1906 reschedule_retry(r10_bio);
1910 static void end_sync_read(struct bio *bio)
1912 struct r10bio *r10_bio = get_resync_r10bio(bio);
1913 struct r10conf *conf = r10_bio->mddev->private;
1914 int d = find_bio_disk(conf, r10_bio, bio, NULL, NULL);
1916 __end_sync_read(r10_bio, bio, d);
1919 static void end_reshape_read(struct bio *bio)
1921 /* reshape read bio isn't allocated from r10buf_pool */
1922 struct r10bio *r10_bio = bio->bi_private;
1924 __end_sync_read(r10_bio, bio, r10_bio->read_slot);
1927 static void end_sync_request(struct r10bio *r10_bio)
1929 struct mddev *mddev = r10_bio->mddev;
1931 while (atomic_dec_and_test(&r10_bio->remaining)) {
1932 if (r10_bio->master_bio == NULL) {
1933 /* the primary of several recovery bios */
1934 sector_t s = r10_bio->sectors;
1935 if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
1936 test_bit(R10BIO_WriteError, &r10_bio->state))
1937 reschedule_retry(r10_bio);
1940 md_done_sync(mddev, s, 1);
1943 struct r10bio *r10_bio2 = (struct r10bio *)r10_bio->master_bio;
1944 if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
1945 test_bit(R10BIO_WriteError, &r10_bio->state))
1946 reschedule_retry(r10_bio);
1954 static void end_sync_write(struct bio *bio)
1956 struct r10bio *r10_bio = get_resync_r10bio(bio);
1957 struct mddev *mddev = r10_bio->mddev;
1958 struct r10conf *conf = mddev->private;
1964 struct md_rdev *rdev = NULL;
1966 d = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
1968 rdev = conf->mirrors[d].replacement;
1970 rdev = conf->mirrors[d].rdev;
1972 if (bio->bi_status) {
1974 md_error(mddev, rdev);
1976 set_bit(WriteErrorSeen, &rdev->flags);
1977 if (!test_and_set_bit(WantReplacement, &rdev->flags))
1978 set_bit(MD_RECOVERY_NEEDED,
1979 &rdev->mddev->recovery);
1980 set_bit(R10BIO_WriteError, &r10_bio->state);
1982 } else if (is_badblock(rdev,
1983 r10_bio->devs[slot].addr,
1985 &first_bad, &bad_sectors))
1986 set_bit(R10BIO_MadeGood, &r10_bio->state);
1988 rdev_dec_pending(rdev, mddev);
1990 end_sync_request(r10_bio);
1994 * Note: sync and recover and handled very differently for raid10
1995 * This code is for resync.
1996 * For resync, we read through virtual addresses and read all blocks.
1997 * If there is any error, we schedule a write. The lowest numbered
1998 * drive is authoritative.
1999 * However requests come for physical address, so we need to map.
2000 * For every physical address there are raid_disks/copies virtual addresses,
2001 * which is always are least one, but is not necessarly an integer.
2002 * This means that a physical address can span multiple chunks, so we may
2003 * have to submit multiple io requests for a single sync request.
2006 * We check if all blocks are in-sync and only write to blocks that
2009 static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio)
2011 struct r10conf *conf = mddev->private;
2013 struct bio *tbio, *fbio;
2015 struct page **tpages, **fpages;
2017 atomic_set(&r10_bio->remaining, 1);
2019 /* find the first device with a block */
2020 for (i=0; i<conf->copies; i++)
2021 if (!r10_bio->devs[i].bio->bi_status)
2024 if (i == conf->copies)
2028 fbio = r10_bio->devs[i].bio;
2029 fbio->bi_iter.bi_size = r10_bio->sectors << 9;
2030 fbio->bi_iter.bi_idx = 0;
2031 fpages = get_resync_pages(fbio)->pages;
2033 vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9);
2034 /* now find blocks with errors */
2035 for (i=0 ; i < conf->copies ; i++) {
2037 struct md_rdev *rdev;
2038 struct resync_pages *rp;
2040 tbio = r10_bio->devs[i].bio;
2042 if (tbio->bi_end_io != end_sync_read)
2047 tpages = get_resync_pages(tbio)->pages;
2048 d = r10_bio->devs[i].devnum;
2049 rdev = conf->mirrors[d].rdev;
2050 if (!r10_bio->devs[i].bio->bi_status) {
2051 /* We know that the bi_io_vec layout is the same for
2052 * both 'first' and 'i', so we just compare them.
2053 * All vec entries are PAGE_SIZE;
2055 int sectors = r10_bio->sectors;
2056 for (j = 0; j < vcnt; j++) {
2057 int len = PAGE_SIZE;
2058 if (sectors < (len / 512))
2059 len = sectors * 512;
2060 if (memcmp(page_address(fpages[j]),
2061 page_address(tpages[j]),
2068 atomic64_add(r10_bio->sectors, &mddev->resync_mismatches);
2069 if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
2070 /* Don't fix anything. */
2072 } else if (test_bit(FailFast, &rdev->flags)) {
2073 /* Just give up on this device */
2074 md_error(rdev->mddev, rdev);
2077 /* Ok, we need to write this bio, either to correct an
2078 * inconsistency or to correct an unreadable block.
2079 * First we need to fixup bv_offset, bv_len and
2080 * bi_vecs, as the read request might have corrupted these
2082 rp = get_resync_pages(tbio);
2085 md_bio_reset_resync_pages(tbio, rp, fbio->bi_iter.bi_size);
2087 rp->raid_bio = r10_bio;
2088 tbio->bi_private = rp;
2089 tbio->bi_iter.bi_sector = r10_bio->devs[i].addr;
2090 tbio->bi_end_io = end_sync_write;
2091 bio_set_op_attrs(tbio, REQ_OP_WRITE, 0);
2093 bio_copy_data(tbio, fbio);
2095 atomic_inc(&conf->mirrors[d].rdev->nr_pending);
2096 atomic_inc(&r10_bio->remaining);
2097 md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(tbio));
2099 if (test_bit(FailFast, &conf->mirrors[d].rdev->flags))
2100 tbio->bi_opf |= MD_FAILFAST;
2101 tbio->bi_iter.bi_sector += conf->mirrors[d].rdev->data_offset;
2102 bio_set_dev(tbio, conf->mirrors[d].rdev->bdev);
2103 generic_make_request(tbio);
2106 /* Now write out to any replacement devices
2109 for (i = 0; i < conf->copies; i++) {
2112 tbio = r10_bio->devs[i].repl_bio;
2113 if (!tbio || !tbio->bi_end_io)
2115 if (r10_bio->devs[i].bio->bi_end_io != end_sync_write
2116 && r10_bio->devs[i].bio != fbio)
2117 bio_copy_data(tbio, fbio);
2118 d = r10_bio->devs[i].devnum;
2119 atomic_inc(&r10_bio->remaining);
2120 md_sync_acct(conf->mirrors[d].replacement->bdev,
2122 generic_make_request(tbio);
2126 if (atomic_dec_and_test(&r10_bio->remaining)) {
2127 md_done_sync(mddev, r10_bio->sectors, 1);
2133 * Now for the recovery code.
2134 * Recovery happens across physical sectors.
2135 * We recover all non-is_sync drives by finding the virtual address of
2136 * each, and then choose a working drive that also has that virt address.
2137 * There is a separate r10_bio for each non-in_sync drive.
2138 * Only the first two slots are in use. The first for reading,
2139 * The second for writing.
2142 static void fix_recovery_read_error(struct r10bio *r10_bio)
2144 /* We got a read error during recovery.
2145 * We repeat the read in smaller page-sized sections.
2146 * If a read succeeds, write it to the new device or record
2147 * a bad block if we cannot.
2148 * If a read fails, record a bad block on both old and
2151 struct mddev *mddev = r10_bio->mddev;
2152 struct r10conf *conf = mddev->private;
2153 struct bio *bio = r10_bio->devs[0].bio;
2155 int sectors = r10_bio->sectors;
2157 int dr = r10_bio->devs[0].devnum;
2158 int dw = r10_bio->devs[1].devnum;
2159 struct page **pages = get_resync_pages(bio)->pages;
2163 struct md_rdev *rdev;
2167 if (s > (PAGE_SIZE>>9))
2170 rdev = conf->mirrors[dr].rdev;
2171 addr = r10_bio->devs[0].addr + sect,
2172 ok = sync_page_io(rdev,
2176 REQ_OP_READ, 0, false);
2178 rdev = conf->mirrors[dw].rdev;
2179 addr = r10_bio->devs[1].addr + sect;
2180 ok = sync_page_io(rdev,
2184 REQ_OP_WRITE, 0, false);
2186 set_bit(WriteErrorSeen, &rdev->flags);
2187 if (!test_and_set_bit(WantReplacement,
2189 set_bit(MD_RECOVERY_NEEDED,
2190 &rdev->mddev->recovery);
2194 /* We don't worry if we cannot set a bad block -
2195 * it really is bad so there is no loss in not
2198 rdev_set_badblocks(rdev, addr, s, 0);
2200 if (rdev != conf->mirrors[dw].rdev) {
2201 /* need bad block on destination too */
2202 struct md_rdev *rdev2 = conf->mirrors[dw].rdev;
2203 addr = r10_bio->devs[1].addr + sect;
2204 ok = rdev_set_badblocks(rdev2, addr, s, 0);
2206 /* just abort the recovery */
2207 pr_notice("md/raid10:%s: recovery aborted due to read error\n",
2210 conf->mirrors[dw].recovery_disabled
2211 = mddev->recovery_disabled;
2212 set_bit(MD_RECOVERY_INTR,
2225 static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio)
2227 struct r10conf *conf = mddev->private;
2229 struct bio *wbio, *wbio2;
2231 if (!test_bit(R10BIO_Uptodate, &r10_bio->state)) {
2232 fix_recovery_read_error(r10_bio);
2233 end_sync_request(r10_bio);
2238 * share the pages with the first bio
2239 * and submit the write request
2241 d = r10_bio->devs[1].devnum;
2242 wbio = r10_bio->devs[1].bio;
2243 wbio2 = r10_bio->devs[1].repl_bio;
2244 /* Need to test wbio2->bi_end_io before we call
2245 * generic_make_request as if the former is NULL,
2246 * the latter is free to free wbio2.
2248 if (wbio2 && !wbio2->bi_end_io)
2250 if (wbio->bi_end_io) {
2251 atomic_inc(&conf->mirrors[d].rdev->nr_pending);
2252 md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(wbio));
2253 generic_make_request(wbio);
2256 atomic_inc(&conf->mirrors[d].replacement->nr_pending);
2257 md_sync_acct(conf->mirrors[d].replacement->bdev,
2258 bio_sectors(wbio2));
2259 generic_make_request(wbio2);
2264 * Used by fix_read_error() to decay the per rdev read_errors.
2265 * We halve the read error count for every hour that has elapsed
2266 * since the last recorded read error.
2269 static void check_decay_read_errors(struct mddev *mddev, struct md_rdev *rdev)
2272 unsigned long hours_since_last;
2273 unsigned int read_errors = atomic_read(&rdev->read_errors);
2275 cur_time_mon = ktime_get_seconds();
2277 if (rdev->last_read_error == 0) {
2278 /* first time we've seen a read error */
2279 rdev->last_read_error = cur_time_mon;
2283 hours_since_last = (long)(cur_time_mon -
2284 rdev->last_read_error) / 3600;
2286 rdev->last_read_error = cur_time_mon;
2289 * if hours_since_last is > the number of bits in read_errors
2290 * just set read errors to 0. We do this to avoid
2291 * overflowing the shift of read_errors by hours_since_last.
2293 if (hours_since_last >= 8 * sizeof(read_errors))
2294 atomic_set(&rdev->read_errors, 0);
2296 atomic_set(&rdev->read_errors, read_errors >> hours_since_last);
2299 static int r10_sync_page_io(struct md_rdev *rdev, sector_t sector,
2300 int sectors, struct page *page, int rw)
2305 if (is_badblock(rdev, sector, sectors, &first_bad, &bad_sectors)
2306 && (rw == READ || test_bit(WriteErrorSeen, &rdev->flags)))
2308 if (sync_page_io(rdev, sector, sectors << 9, page, rw, 0, false))
2312 set_bit(WriteErrorSeen, &rdev->flags);
2313 if (!test_and_set_bit(WantReplacement, &rdev->flags))
2314 set_bit(MD_RECOVERY_NEEDED,
2315 &rdev->mddev->recovery);
2317 /* need to record an error - either for the block or the device */
2318 if (!rdev_set_badblocks(rdev, sector, sectors, 0))
2319 md_error(rdev->mddev, rdev);
2324 * This is a kernel thread which:
2326 * 1. Retries failed read operations on working mirrors.
2327 * 2. Updates the raid superblock when problems encounter.
2328 * 3. Performs writes following reads for array synchronising.
2331 static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10bio *r10_bio)
2333 int sect = 0; /* Offset from r10_bio->sector */
2334 int sectors = r10_bio->sectors;
2335 struct md_rdev *rdev;
2336 int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
2337 int d = r10_bio->devs[r10_bio->read_slot].devnum;
2339 /* still own a reference to this rdev, so it cannot
2340 * have been cleared recently.
2342 rdev = conf->mirrors[d].rdev;
2344 if (test_bit(Faulty, &rdev->flags))
2345 /* drive has already been failed, just ignore any
2346 more fix_read_error() attempts */
2349 check_decay_read_errors(mddev, rdev);
2350 atomic_inc(&rdev->read_errors);
2351 if (atomic_read(&rdev->read_errors) > max_read_errors) {
2352 char b[BDEVNAME_SIZE];
2353 bdevname(rdev->bdev, b);
2355 pr_notice("md/raid10:%s: %s: Raid device exceeded read_error threshold [cur %d:max %d]\n",
2357 atomic_read(&rdev->read_errors), max_read_errors);
2358 pr_notice("md/raid10:%s: %s: Failing raid device\n",
2360 md_error(mddev, rdev);
2361 r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
2367 int sl = r10_bio->read_slot;
2371 if (s > (PAGE_SIZE>>9))
2379 d = r10_bio->devs[sl].devnum;
2380 rdev = rcu_dereference(conf->mirrors[d].rdev);
2382 test_bit(In_sync, &rdev->flags) &&
2383 !test_bit(Faulty, &rdev->flags) &&
2384 is_badblock(rdev, r10_bio->devs[sl].addr + sect, s,
2385 &first_bad, &bad_sectors) == 0) {
2386 atomic_inc(&rdev->nr_pending);
2388 success = sync_page_io(rdev,
2389 r10_bio->devs[sl].addr +
2393 REQ_OP_READ, 0, false);
2394 rdev_dec_pending(rdev, mddev);
2400 if (sl == conf->copies)
2402 } while (!success && sl != r10_bio->read_slot);
2406 /* Cannot read from anywhere, just mark the block
2407 * as bad on the first device to discourage future
2410 int dn = r10_bio->devs[r10_bio->read_slot].devnum;
2411 rdev = conf->mirrors[dn].rdev;
2413 if (!rdev_set_badblocks(
2415 r10_bio->devs[r10_bio->read_slot].addr
2418 md_error(mddev, rdev);
2419 r10_bio->devs[r10_bio->read_slot].bio
2426 /* write it back and re-read */
2428 while (sl != r10_bio->read_slot) {
2429 char b[BDEVNAME_SIZE];
2434 d = r10_bio->devs[sl].devnum;
2435 rdev = rcu_dereference(conf->mirrors[d].rdev);
2437 test_bit(Faulty, &rdev->flags) ||
2438 !test_bit(In_sync, &rdev->flags))
2441 atomic_inc(&rdev->nr_pending);
2443 if (r10_sync_page_io(rdev,
2444 r10_bio->devs[sl].addr +
2446 s, conf->tmppage, WRITE)
2448 /* Well, this device is dead */
2449 pr_notice("md/raid10:%s: read correction write failed (%d sectors at %llu on %s)\n",
2451 (unsigned long long)(
2453 choose_data_offset(r10_bio,
2455 bdevname(rdev->bdev, b));
2456 pr_notice("md/raid10:%s: %s: failing drive\n",
2458 bdevname(rdev->bdev, b));
2460 rdev_dec_pending(rdev, mddev);
2464 while (sl != r10_bio->read_slot) {
2465 char b[BDEVNAME_SIZE];
2470 d = r10_bio->devs[sl].devnum;
2471 rdev = rcu_dereference(conf->mirrors[d].rdev);
2473 test_bit(Faulty, &rdev->flags) ||
2474 !test_bit(In_sync, &rdev->flags))
2477 atomic_inc(&rdev->nr_pending);
2479 switch (r10_sync_page_io(rdev,
2480 r10_bio->devs[sl].addr +
2485 /* Well, this device is dead */
2486 pr_notice("md/raid10:%s: unable to read back corrected sectors (%d sectors at %llu on %s)\n",
2488 (unsigned long long)(
2490 choose_data_offset(r10_bio, rdev)),
2491 bdevname(rdev->bdev, b));
2492 pr_notice("md/raid10:%s: %s: failing drive\n",
2494 bdevname(rdev->bdev, b));
2497 pr_info("md/raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
2499 (unsigned long long)(
2501 choose_data_offset(r10_bio, rdev)),
2502 bdevname(rdev->bdev, b));
2503 atomic_add(s, &rdev->corrected_errors);
2506 rdev_dec_pending(rdev, mddev);
2516 static int narrow_write_error(struct r10bio *r10_bio, int i)
2518 struct bio *bio = r10_bio->master_bio;
2519 struct mddev *mddev = r10_bio->mddev;
2520 struct r10conf *conf = mddev->private;
2521 struct md_rdev *rdev = conf->mirrors[r10_bio->devs[i].devnum].rdev;
2522 /* bio has the data to be written to slot 'i' where
2523 * we just recently had a write error.
2524 * We repeatedly clone the bio and trim down to one block,
2525 * then try the write. Where the write fails we record
2527 * It is conceivable that the bio doesn't exactly align with
2528 * blocks. We must handle this.
2530 * We currently own a reference to the rdev.
2536 int sect_to_write = r10_bio->sectors;
2539 if (rdev->badblocks.shift < 0)
2542 block_sectors = roundup(1 << rdev->badblocks.shift,
2543 bdev_logical_block_size(rdev->bdev) >> 9);
2544 sector = r10_bio->sector;
2545 sectors = ((r10_bio->sector + block_sectors)
2546 & ~(sector_t)(block_sectors - 1))
2549 while (sect_to_write) {
2552 if (sectors > sect_to_write)
2553 sectors = sect_to_write;
2554 /* Write at 'sector' for 'sectors' */
2555 wbio = bio_clone_fast(bio, GFP_NOIO, &mddev->bio_set);
2556 bio_trim(wbio, sector - bio->bi_iter.bi_sector, sectors);
2557 wsector = r10_bio->devs[i].addr + (sector - r10_bio->sector);
2558 wbio->bi_iter.bi_sector = wsector +
2559 choose_data_offset(r10_bio, rdev);
2560 bio_set_dev(wbio, rdev->bdev);
2561 bio_set_op_attrs(wbio, REQ_OP_WRITE, 0);
2563 if (submit_bio_wait(wbio) < 0)
2565 ok = rdev_set_badblocks(rdev, wsector,
2570 sect_to_write -= sectors;
2572 sectors = block_sectors;
2577 static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
2579 int slot = r10_bio->read_slot;
2581 struct r10conf *conf = mddev->private;
2582 struct md_rdev *rdev = r10_bio->devs[slot].rdev;
2584 /* we got a read error. Maybe the drive is bad. Maybe just
2585 * the block and we can fix it.
2586 * We freeze all other IO, and try reading the block from
2587 * other devices. When we find one, we re-write
2588 * and check it that fixes the read error.
2589 * This is all done synchronously while the array is
2592 bio = r10_bio->devs[slot].bio;
2594 r10_bio->devs[slot].bio = NULL;
2597 r10_bio->devs[slot].bio = IO_BLOCKED;
2598 else if (!test_bit(FailFast, &rdev->flags)) {
2599 freeze_array(conf, 1);
2600 fix_read_error(conf, mddev, r10_bio);
2601 unfreeze_array(conf);
2603 md_error(mddev, rdev);
2605 rdev_dec_pending(rdev, mddev);
2606 allow_barrier(conf);
2608 raid10_read_request(mddev, r10_bio->master_bio, r10_bio);
2611 static void handle_write_completed(struct r10conf *conf, struct r10bio *r10_bio)
2613 /* Some sort of write request has finished and it
2614 * succeeded in writing where we thought there was a
2615 * bad block. So forget the bad block.
2616 * Or possibly if failed and we need to record
2620 struct md_rdev *rdev;
2622 if (test_bit(R10BIO_IsSync, &r10_bio->state) ||
2623 test_bit(R10BIO_IsRecover, &r10_bio->state)) {
2624 for (m = 0; m < conf->copies; m++) {
2625 int dev = r10_bio->devs[m].devnum;
2626 rdev = conf->mirrors[dev].rdev;
2627 if (r10_bio->devs[m].bio == NULL ||
2628 r10_bio->devs[m].bio->bi_end_io == NULL)
2630 if (!r10_bio->devs[m].bio->bi_status) {
2631 rdev_clear_badblocks(
2633 r10_bio->devs[m].addr,
2634 r10_bio->sectors, 0);
2636 if (!rdev_set_badblocks(
2638 r10_bio->devs[m].addr,
2639 r10_bio->sectors, 0))
2640 md_error(conf->mddev, rdev);
2642 rdev = conf->mirrors[dev].replacement;
2643 if (r10_bio->devs[m].repl_bio == NULL ||
2644 r10_bio->devs[m].repl_bio->bi_end_io == NULL)
2647 if (!r10_bio->devs[m].repl_bio->bi_status) {
2648 rdev_clear_badblocks(
2650 r10_bio->devs[m].addr,
2651 r10_bio->sectors, 0);
2653 if (!rdev_set_badblocks(
2655 r10_bio->devs[m].addr,
2656 r10_bio->sectors, 0))
2657 md_error(conf->mddev, rdev);
2663 for (m = 0; m < conf->copies; m++) {
2664 int dev = r10_bio->devs[m].devnum;
2665 struct bio *bio = r10_bio->devs[m].bio;
2666 rdev = conf->mirrors[dev].rdev;
2667 if (bio == IO_MADE_GOOD) {
2668 rdev_clear_badblocks(
2670 r10_bio->devs[m].addr,
2671 r10_bio->sectors, 0);
2672 rdev_dec_pending(rdev, conf->mddev);
2673 } else if (bio != NULL && bio->bi_status) {
2675 if (!narrow_write_error(r10_bio, m)) {
2676 md_error(conf->mddev, rdev);
2677 set_bit(R10BIO_Degraded,
2680 rdev_dec_pending(rdev, conf->mddev);
2682 bio = r10_bio->devs[m].repl_bio;
2683 rdev = conf->mirrors[dev].replacement;
2684 if (rdev && bio == IO_MADE_GOOD) {
2685 rdev_clear_badblocks(
2687 r10_bio->devs[m].addr,
2688 r10_bio->sectors, 0);
2689 rdev_dec_pending(rdev, conf->mddev);
2693 spin_lock_irq(&conf->device_lock);
2694 list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
2696 spin_unlock_irq(&conf->device_lock);
2698 * In case freeze_array() is waiting for condition
2699 * nr_pending == nr_queued + extra to be true.
2701 wake_up(&conf->wait_barrier);
2702 md_wakeup_thread(conf->mddev->thread);
2704 if (test_bit(R10BIO_WriteError,
2706 close_write(r10_bio);
2707 raid_end_bio_io(r10_bio);
2712 static void raid10d(struct md_thread *thread)
2714 struct mddev *mddev = thread->mddev;
2715 struct r10bio *r10_bio;
2716 unsigned long flags;
2717 struct r10conf *conf = mddev->private;
2718 struct list_head *head = &conf->retry_list;
2719 struct blk_plug plug;
2721 md_check_recovery(mddev);
2723 if (!list_empty_careful(&conf->bio_end_io_list) &&
2724 !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
2726 spin_lock_irqsave(&conf->device_lock, flags);
2727 if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
2728 while (!list_empty(&conf->bio_end_io_list)) {
2729 list_move(conf->bio_end_io_list.prev, &tmp);
2733 spin_unlock_irqrestore(&conf->device_lock, flags);
2734 while (!list_empty(&tmp)) {
2735 r10_bio = list_first_entry(&tmp, struct r10bio,
2737 list_del(&r10_bio->retry_list);
2738 if (mddev->degraded)
2739 set_bit(R10BIO_Degraded, &r10_bio->state);
2741 if (test_bit(R10BIO_WriteError,
2743 close_write(r10_bio);
2744 raid_end_bio_io(r10_bio);
2748 blk_start_plug(&plug);
2751 flush_pending_writes(conf);
2753 spin_lock_irqsave(&conf->device_lock, flags);
2754 if (list_empty(head)) {
2755 spin_unlock_irqrestore(&conf->device_lock, flags);
2758 r10_bio = list_entry(head->prev, struct r10bio, retry_list);
2759 list_del(head->prev);
2761 spin_unlock_irqrestore(&conf->device_lock, flags);
2763 mddev = r10_bio->mddev;
2764 conf = mddev->private;
2765 if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
2766 test_bit(R10BIO_WriteError, &r10_bio->state))
2767 handle_write_completed(conf, r10_bio);
2768 else if (test_bit(R10BIO_IsReshape, &r10_bio->state))
2769 reshape_request_write(mddev, r10_bio);
2770 else if (test_bit(R10BIO_IsSync, &r10_bio->state))
2771 sync_request_write(mddev, r10_bio);
2772 else if (test_bit(R10BIO_IsRecover, &r10_bio->state))
2773 recovery_request_write(mddev, r10_bio);
2774 else if (test_bit(R10BIO_ReadError, &r10_bio->state))
2775 handle_read_error(mddev, r10_bio);
2780 if (mddev->sb_flags & ~(1<<MD_SB_CHANGE_PENDING))
2781 md_check_recovery(mddev);
2783 blk_finish_plug(&plug);
2786 static int init_resync(struct r10conf *conf)
2790 buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
2791 BUG_ON(mempool_initialized(&conf->r10buf_pool));
2792 conf->have_replacement = 0;
2793 for (i = 0; i < conf->geo.raid_disks; i++)
2794 if (conf->mirrors[i].replacement)
2795 conf->have_replacement = 1;
2796 ret = mempool_init(&conf->r10buf_pool, buffs,
2797 r10buf_pool_alloc, r10buf_pool_free, conf);
2800 conf->next_resync = 0;
2804 static struct r10bio *raid10_alloc_init_r10buf(struct r10conf *conf)
2806 struct r10bio *r10bio = mempool_alloc(&conf->r10buf_pool, GFP_NOIO);
2807 struct rsync_pages *rp;
2812 if (test_bit(MD_RECOVERY_SYNC, &conf->mddev->recovery) ||
2813 test_bit(MD_RECOVERY_RESHAPE, &conf->mddev->recovery))
2814 nalloc = conf->copies; /* resync */
2816 nalloc = 2; /* recovery */
2818 for (i = 0; i < nalloc; i++) {
2819 bio = r10bio->devs[i].bio;
2820 rp = bio->bi_private;
2822 bio->bi_private = rp;
2823 bio = r10bio->devs[i].repl_bio;
2825 rp = bio->bi_private;
2827 bio->bi_private = rp;
2834 * Set cluster_sync_high since we need other nodes to add the
2835 * range [cluster_sync_low, cluster_sync_high] to suspend list.
2837 static void raid10_set_cluster_sync_high(struct r10conf *conf)
2839 sector_t window_size;
2840 int extra_chunk, chunks;
2843 * First, here we define "stripe" as a unit which across
2844 * all member devices one time, so we get chunks by use
2845 * raid_disks / near_copies. Otherwise, if near_copies is
2846 * close to raid_disks, then resync window could increases
2847 * linearly with the increase of raid_disks, which means
2848 * we will suspend a really large IO window while it is not
2849 * necessary. If raid_disks is not divisible by near_copies,
2850 * an extra chunk is needed to ensure the whole "stripe" is
2854 chunks = conf->geo.raid_disks / conf->geo.near_copies;
2855 if (conf->geo.raid_disks % conf->geo.near_copies == 0)
2859 window_size = (chunks + extra_chunk) * conf->mddev->chunk_sectors;
2862 * At least use a 32M window to align with raid1's resync window
2864 window_size = (CLUSTER_RESYNC_WINDOW_SECTORS > window_size) ?
2865 CLUSTER_RESYNC_WINDOW_SECTORS : window_size;
2867 conf->cluster_sync_high = conf->cluster_sync_low + window_size;
2871 * perform a "sync" on one "block"
2873 * We need to make sure that no normal I/O request - particularly write
2874 * requests - conflict with active sync requests.
2876 * This is achieved by tracking pending requests and a 'barrier' concept
2877 * that can be installed to exclude normal IO requests.
2879 * Resync and recovery are handled very differently.
2880 * We differentiate by looking at MD_RECOVERY_SYNC in mddev->recovery.
2882 * For resync, we iterate over virtual addresses, read all copies,
2883 * and update if there are differences. If only one copy is live,
2885 * For recovery, we iterate over physical addresses, read a good
2886 * value for each non-in_sync drive, and over-write.
2888 * So, for recovery we may have several outstanding complex requests for a
2889 * given address, one for each out-of-sync device. We model this by allocating
2890 * a number of r10_bio structures, one for each out-of-sync device.
2891 * As we setup these structures, we collect all bio's together into a list
2892 * which we then process collectively to add pages, and then process again
2893 * to pass to generic_make_request.
2895 * The r10_bio structures are linked using a borrowed master_bio pointer.
2896 * This link is counted in ->remaining. When the r10_bio that points to NULL
2897 * has its remaining count decremented to 0, the whole complex operation
2902 static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
2905 struct r10conf *conf = mddev->private;
2906 struct r10bio *r10_bio;
2907 struct bio *biolist = NULL, *bio;
2908 sector_t max_sector, nr_sectors;
2911 sector_t sync_blocks;
2912 sector_t sectors_skipped = 0;
2913 int chunks_skipped = 0;
2914 sector_t chunk_mask = conf->geo.chunk_mask;
2917 if (!mempool_initialized(&conf->r10buf_pool))
2918 if (init_resync(conf))
2922 * Allow skipping a full rebuild for incremental assembly
2923 * of a clean array, like RAID1 does.
2925 if (mddev->bitmap == NULL &&
2926 mddev->recovery_cp == MaxSector &&
2927 mddev->reshape_position == MaxSector &&
2928 !test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
2929 !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
2930 !test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
2931 conf->fullsync == 0) {
2933 return mddev->dev_sectors - sector_nr;
2937 max_sector = mddev->dev_sectors;
2938 if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
2939 test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
2940 max_sector = mddev->resync_max_sectors;
2941 if (sector_nr >= max_sector) {
2942 conf->cluster_sync_low = 0;
2943 conf->cluster_sync_high = 0;
2945 /* If we aborted, we need to abort the
2946 * sync on the 'current' bitmap chucks (there can
2947 * be several when recovering multiple devices).
2948 * as we may have started syncing it but not finished.
2949 * We can find the current address in
2950 * mddev->curr_resync, but for recovery,
2951 * we need to convert that to several
2952 * virtual addresses.
2954 if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
2960 if (mddev->curr_resync < max_sector) { /* aborted */
2961 if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
2962 md_bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
2964 else for (i = 0; i < conf->geo.raid_disks; i++) {
2966 raid10_find_virt(conf, mddev->curr_resync, i);
2967 md_bitmap_end_sync(mddev->bitmap, sect,
2971 /* completed sync */
2972 if ((!mddev->bitmap || conf->fullsync)
2973 && conf->have_replacement
2974 && test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
2975 /* Completed a full sync so the replacements
2976 * are now fully recovered.
2979 for (i = 0; i < conf->geo.raid_disks; i++) {
2980 struct md_rdev *rdev =
2981 rcu_dereference(conf->mirrors[i].replacement);
2983 rdev->recovery_offset = MaxSector;
2989 md_bitmap_close_sync(mddev->bitmap);
2992 return sectors_skipped;
2995 if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
2996 return reshape_request(mddev, sector_nr, skipped);
2998 if (chunks_skipped >= conf->geo.raid_disks) {
2999 /* if there has been nothing to do on any drive,
3000 * then there is nothing to do at all..
3003 return (max_sector - sector_nr) + sectors_skipped;
3006 if (max_sector > mddev->resync_max)
3007 max_sector = mddev->resync_max; /* Don't do IO beyond here */
3009 /* make sure whole request will fit in a chunk - if chunks
3012 if (conf->geo.near_copies < conf->geo.raid_disks &&
3013 max_sector > (sector_nr | chunk_mask))
3014 max_sector = (sector_nr | chunk_mask) + 1;
3017 * If there is non-resync activity waiting for a turn, then let it
3018 * though before starting on this new sync request.
3020 if (conf->nr_waiting)
3021 schedule_timeout_uninterruptible(1);
3023 /* Again, very different code for resync and recovery.
3024 * Both must result in an r10bio with a list of bios that
3025 * have bi_end_io, bi_sector, bi_disk set,
3026 * and bi_private set to the r10bio.
3027 * For recovery, we may actually create several r10bios
3028 * with 2 bios in each, that correspond to the bios in the main one.
3029 * In this case, the subordinate r10bios link back through a
3030 * borrowed master_bio pointer, and the counter in the master
3031 * includes a ref from each subordinate.
3033 /* First, we decide what to do and set ->bi_end_io
3034 * To end_sync_read if we want to read, and
3035 * end_sync_write if we will want to write.
3038 max_sync = RESYNC_PAGES << (PAGE_SHIFT-9);
3039 if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
3040 /* recovery... the complicated one */
3044 for (i = 0 ; i < conf->geo.raid_disks; i++) {
3050 int need_recover = 0;
3051 int need_replace = 0;
3052 struct raid10_info *mirror = &conf->mirrors[i];
3053 struct md_rdev *mrdev, *mreplace;
3056 mrdev = rcu_dereference(mirror->rdev);
3057 mreplace = rcu_dereference(mirror->replacement);
3059 if (mrdev != NULL &&
3060 !test_bit(Faulty, &mrdev->flags) &&
3061 !test_bit(In_sync, &mrdev->flags))
3063 if (mreplace != NULL &&
3064 !test_bit(Faulty, &mreplace->flags))
3067 if (!need_recover && !need_replace) {
3073 /* want to reconstruct this device */
3075 sect = raid10_find_virt(conf, sector_nr, i);
3076 if (sect >= mddev->resync_max_sectors) {
3077 /* last stripe is not complete - don't
3078 * try to recover this sector.
3083 if (mreplace && test_bit(Faulty, &mreplace->flags))
3085 /* Unless we are doing a full sync, or a replacement
3086 * we only need to recover the block if it is set in
3089 must_sync = md_bitmap_start_sync(mddev->bitmap, sect,
3091 if (sync_blocks < max_sync)
3092 max_sync = sync_blocks;
3096 /* yep, skip the sync_blocks here, but don't assume
3097 * that there will never be anything to do here
3099 chunks_skipped = -1;
3103 atomic_inc(&mrdev->nr_pending);
3105 atomic_inc(&mreplace->nr_pending);
3108 r10_bio = raid10_alloc_init_r10buf(conf);
3110 raise_barrier(conf, rb2 != NULL);
3111 atomic_set(&r10_bio->remaining, 0);
3113 r10_bio->master_bio = (struct bio*)rb2;
3115 atomic_inc(&rb2->remaining);
3116 r10_bio->mddev = mddev;
3117 set_bit(R10BIO_IsRecover, &r10_bio->state);
3118 r10_bio->sector = sect;
3120 raid10_find_phys(conf, r10_bio);
3122 /* Need to check if the array will still be
3126 for (j = 0; j < conf->geo.raid_disks; j++) {
3127 struct md_rdev *rdev = rcu_dereference(
3128 conf->mirrors[j].rdev);
3129 if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
3135 must_sync = md_bitmap_start_sync(mddev->bitmap, sect,
3136 &sync_blocks, still_degraded);
3139 for (j=0; j<conf->copies;j++) {
3141 int d = r10_bio->devs[j].devnum;
3142 sector_t from_addr, to_addr;
3143 struct md_rdev *rdev =
3144 rcu_dereference(conf->mirrors[d].rdev);
3145 sector_t sector, first_bad;
3148 !test_bit(In_sync, &rdev->flags))
3150 /* This is where we read from */
3152 sector = r10_bio->devs[j].addr;
3154 if (is_badblock(rdev, sector, max_sync,
3155 &first_bad, &bad_sectors)) {
3156 if (first_bad > sector)
3157 max_sync = first_bad - sector;
3159 bad_sectors -= (sector
3161 if (max_sync > bad_sectors)
3162 max_sync = bad_sectors;
3166 bio = r10_bio->devs[0].bio;
3167 bio->bi_next = biolist;
3169 bio->bi_end_io = end_sync_read;
3170 bio_set_op_attrs(bio, REQ_OP_READ, 0);
3171 if (test_bit(FailFast, &rdev->flags))
3172 bio->bi_opf |= MD_FAILFAST;
3173 from_addr = r10_bio->devs[j].addr;
3174 bio->bi_iter.bi_sector = from_addr +
3176 bio_set_dev(bio, rdev->bdev);
3177 atomic_inc(&rdev->nr_pending);
3178 /* and we write to 'i' (if not in_sync) */
3180 for (k=0; k<conf->copies; k++)
3181 if (r10_bio->devs[k].devnum == i)
3183 BUG_ON(k == conf->copies);
3184 to_addr = r10_bio->devs[k].addr;
3185 r10_bio->devs[0].devnum = d;
3186 r10_bio->devs[0].addr = from_addr;
3187 r10_bio->devs[1].devnum = i;
3188 r10_bio->devs[1].addr = to_addr;
3191 bio = r10_bio->devs[1].bio;
3192 bio->bi_next = biolist;
3194 bio->bi_end_io = end_sync_write;
3195 bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
3196 bio->bi_iter.bi_sector = to_addr
3197 + mrdev->data_offset;
3198 bio_set_dev(bio, mrdev->bdev);
3199 atomic_inc(&r10_bio->remaining);
3201 r10_bio->devs[1].bio->bi_end_io = NULL;
3203 /* and maybe write to replacement */
3204 bio = r10_bio->devs[1].repl_bio;
3206 bio->bi_end_io = NULL;
3207 /* Note: if need_replace, then bio
3208 * cannot be NULL as r10buf_pool_alloc will
3209 * have allocated it.
3213 bio->bi_next = biolist;
3215 bio->bi_end_io = end_sync_write;
3216 bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
3217 bio->bi_iter.bi_sector = to_addr +
3218 mreplace->data_offset;
3219 bio_set_dev(bio, mreplace->bdev);
3220 atomic_inc(&r10_bio->remaining);
3224 if (j == conf->copies) {
3225 /* Cannot recover, so abort the recovery or
3226 * record a bad block */
3228 /* problem is that there are bad blocks
3229 * on other device(s)
3232 for (k = 0; k < conf->copies; k++)
3233 if (r10_bio->devs[k].devnum == i)
3235 if (!test_bit(In_sync,
3237 && !rdev_set_badblocks(
3239 r10_bio->devs[k].addr,
3243 !rdev_set_badblocks(
3245 r10_bio->devs[k].addr,
3250 if (!test_and_set_bit(MD_RECOVERY_INTR,
3252 pr_warn("md/raid10:%s: insufficient working devices for recovery.\n",
3254 mirror->recovery_disabled
3255 = mddev->recovery_disabled;
3259 atomic_dec(&rb2->remaining);
3261 rdev_dec_pending(mrdev, mddev);
3263 rdev_dec_pending(mreplace, mddev);
3266 rdev_dec_pending(mrdev, mddev);
3268 rdev_dec_pending(mreplace, mddev);
3269 if (r10_bio->devs[0].bio->bi_opf & MD_FAILFAST) {
3270 /* Only want this if there is elsewhere to
3271 * read from. 'j' is currently the first
3275 for (; j < conf->copies; j++) {
3276 int d = r10_bio->devs[j].devnum;
3277 if (conf->mirrors[d].rdev &&
3279 &conf->mirrors[d].rdev->flags))
3283 r10_bio->devs[0].bio->bi_opf
3287 if (biolist == NULL) {
3289 struct r10bio *rb2 = r10_bio;
3290 r10_bio = (struct r10bio*) rb2->master_bio;
3291 rb2->master_bio = NULL;
3297 /* resync. Schedule a read for every block at this virt offset */
3301 * Since curr_resync_completed could probably not update in
3302 * time, and we will set cluster_sync_low based on it.
3303 * Let's check against "sector_nr + 2 * RESYNC_SECTORS" for
3304 * safety reason, which ensures curr_resync_completed is
3305 * updated in bitmap_cond_end_sync.
3307 md_bitmap_cond_end_sync(mddev->bitmap, sector_nr,
3308 mddev_is_clustered(mddev) &&
3309 (sector_nr + 2 * RESYNC_SECTORS > conf->cluster_sync_high));
3311 if (!md_bitmap_start_sync(mddev->bitmap, sector_nr,
3312 &sync_blocks, mddev->degraded) &&
3313 !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED,
3314 &mddev->recovery)) {
3315 /* We can skip this block */
3317 return sync_blocks + sectors_skipped;
3319 if (sync_blocks < max_sync)
3320 max_sync = sync_blocks;
3321 r10_bio = raid10_alloc_init_r10buf(conf);
3324 r10_bio->mddev = mddev;
3325 atomic_set(&r10_bio->remaining, 0);
3326 raise_barrier(conf, 0);
3327 conf->next_resync = sector_nr;
3329 r10_bio->master_bio = NULL;
3330 r10_bio->sector = sector_nr;
3331 set_bit(R10BIO_IsSync, &r10_bio->state);
3332 raid10_find_phys(conf, r10_bio);
3333 r10_bio->sectors = (sector_nr | chunk_mask) - sector_nr + 1;
3335 for (i = 0; i < conf->copies; i++) {
3336 int d = r10_bio->devs[i].devnum;
3337 sector_t first_bad, sector;
3339 struct md_rdev *rdev;
3341 if (r10_bio->devs[i].repl_bio)
3342 r10_bio->devs[i].repl_bio->bi_end_io = NULL;
3344 bio = r10_bio->devs[i].bio;
3345 bio->bi_status = BLK_STS_IOERR;
3347 rdev = rcu_dereference(conf->mirrors[d].rdev);
3348 if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
3352 sector = r10_bio->devs[i].addr;
3353 if (is_badblock(rdev, sector, max_sync,
3354 &first_bad, &bad_sectors)) {
3355 if (first_bad > sector)
3356 max_sync = first_bad - sector;
3358 bad_sectors -= (sector - first_bad);
3359 if (max_sync > bad_sectors)
3360 max_sync = bad_sectors;
3365 atomic_inc(&rdev->nr_pending);
3366 atomic_inc(&r10_bio->remaining);
3367 bio->bi_next = biolist;
3369 bio->bi_end_io = end_sync_read;
3370 bio_set_op_attrs(bio, REQ_OP_READ, 0);
3371 if (test_bit(FailFast, &rdev->flags))
3372 bio->bi_opf |= MD_FAILFAST;
3373 bio->bi_iter.bi_sector = sector + rdev->data_offset;
3374 bio_set_dev(bio, rdev->bdev);
3377 rdev = rcu_dereference(conf->mirrors[d].replacement);
3378 if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
3382 atomic_inc(&rdev->nr_pending);
3384 /* Need to set up for writing to the replacement */
3385 bio = r10_bio->devs[i].repl_bio;
3386 bio->bi_status = BLK_STS_IOERR;
3388 sector = r10_bio->devs[i].addr;
3389 bio->bi_next = biolist;
3391 bio->bi_end_io = end_sync_write;
3392 bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
3393 if (test_bit(FailFast, &rdev->flags))
3394 bio->bi_opf |= MD_FAILFAST;
3395 bio->bi_iter.bi_sector = sector + rdev->data_offset;
3396 bio_set_dev(bio, rdev->bdev);
3402 for (i=0; i<conf->copies; i++) {
3403 int d = r10_bio->devs[i].devnum;
3404 if (r10_bio->devs[i].bio->bi_end_io)
3405 rdev_dec_pending(conf->mirrors[d].rdev,
3407 if (r10_bio->devs[i].repl_bio &&
3408 r10_bio->devs[i].repl_bio->bi_end_io)
3410 conf->mirrors[d].replacement,
3420 if (sector_nr + max_sync < max_sector)
3421 max_sector = sector_nr + max_sync;
3424 int len = PAGE_SIZE;
3425 if (sector_nr + (len>>9) > max_sector)
3426 len = (max_sector - sector_nr) << 9;
3429 for (bio= biolist ; bio ; bio=bio->bi_next) {
3430 struct resync_pages *rp = get_resync_pages(bio);
3431 page = resync_fetch_page(rp, page_idx);
3433 * won't fail because the vec table is big enough
3434 * to hold all these pages
3436 bio_add_page(bio, page, len, 0);
3438 nr_sectors += len>>9;
3439 sector_nr += len>>9;
3440 } while (++page_idx < RESYNC_PAGES);
3441 r10_bio->sectors = nr_sectors;
3443 if (mddev_is_clustered(mddev) &&
3444 test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
3445 /* It is resync not recovery */
3446 if (conf->cluster_sync_high < sector_nr + nr_sectors) {
3447 conf->cluster_sync_low = mddev->curr_resync_completed;
3448 raid10_set_cluster_sync_high(conf);
3449 /* Send resync message */
3450 md_cluster_ops->resync_info_update(mddev,
3451 conf->cluster_sync_low,
3452 conf->cluster_sync_high);
3454 } else if (mddev_is_clustered(mddev)) {
3455 /* This is recovery not resync */
3456 sector_t sect_va1, sect_va2;
3457 bool broadcast_msg = false;
3459 for (i = 0; i < conf->geo.raid_disks; i++) {
3461 * sector_nr is a device address for recovery, so we
3462 * need translate it to array address before compare
3463 * with cluster_sync_high.
3465 sect_va1 = raid10_find_virt(conf, sector_nr, i);
3467 if (conf->cluster_sync_high < sect_va1 + nr_sectors) {
3468 broadcast_msg = true;
3470 * curr_resync_completed is similar as
3471 * sector_nr, so make the translation too.
3473 sect_va2 = raid10_find_virt(conf,
3474 mddev->curr_resync_completed, i);
3476 if (conf->cluster_sync_low == 0 ||
3477 conf->cluster_sync_low > sect_va2)
3478 conf->cluster_sync_low = sect_va2;
3481 if (broadcast_msg) {
3482 raid10_set_cluster_sync_high(conf);
3483 md_cluster_ops->resync_info_update(mddev,
3484 conf->cluster_sync_low,
3485 conf->cluster_sync_high);
3491 biolist = biolist->bi_next;
3493 bio->bi_next = NULL;
3494 r10_bio = get_resync_r10bio(bio);
3495 r10_bio->sectors = nr_sectors;
3497 if (bio->bi_end_io == end_sync_read) {
3498 md_sync_acct_bio(bio, nr_sectors);
3500 generic_make_request(bio);
3504 if (sectors_skipped)
3505 /* pretend they weren't skipped, it makes
3506 * no important difference in this case
3508 md_done_sync(mddev, sectors_skipped, 1);
3510 return sectors_skipped + nr_sectors;
3512 /* There is nowhere to write, so all non-sync
3513 * drives must be failed or in resync, all drives
3514 * have a bad block, so try the next chunk...
3516 if (sector_nr + max_sync < max_sector)
3517 max_sector = sector_nr + max_sync;
3519 sectors_skipped += (max_sector - sector_nr);
3521 sector_nr = max_sector;
3526 raid10_size(struct mddev *mddev, sector_t sectors, int raid_disks)
3529 struct r10conf *conf = mddev->private;
3532 raid_disks = min(conf->geo.raid_disks,
3533 conf->prev.raid_disks);
3535 sectors = conf->dev_sectors;
3537 size = sectors >> conf->geo.chunk_shift;
3538 sector_div(size, conf->geo.far_copies);
3539 size = size * raid_disks;
3540 sector_div(size, conf->geo.near_copies);
3542 return size << conf->geo.chunk_shift;
3545 static void calc_sectors(struct r10conf *conf, sector_t size)
3547 /* Calculate the number of sectors-per-device that will
3548 * actually be used, and set conf->dev_sectors and
3552 size = size >> conf->geo.chunk_shift;
3553 sector_div(size, conf->geo.far_copies);
3554 size = size * conf->geo.raid_disks;
3555 sector_div(size, conf->geo.near_copies);
3556 /* 'size' is now the number of chunks in the array */
3557 /* calculate "used chunks per device" */
3558 size = size * conf->copies;
3560 /* We need to round up when dividing by raid_disks to
3561 * get the stride size.
3563 size = DIV_ROUND_UP_SECTOR_T(size, conf->geo.raid_disks);
3565 conf->dev_sectors = size << conf->geo.chunk_shift;
3567 if (conf->geo.far_offset)
3568 conf->geo.stride = 1 << conf->geo.chunk_shift;
3570 sector_div(size, conf->geo.far_copies);
3571 conf->geo.stride = size << conf->geo.chunk_shift;
3575 enum geo_type {geo_new, geo_old, geo_start};
3576 static int setup_geo(struct geom *geo, struct mddev *mddev, enum geo_type new)
3579 int layout, chunk, disks;
3582 layout = mddev->layout;
3583 chunk = mddev->chunk_sectors;
3584 disks = mddev->raid_disks - mddev->delta_disks;
3587 layout = mddev->new_layout;
3588 chunk = mddev->new_chunk_sectors;
3589 disks = mddev->raid_disks;
3591 default: /* avoid 'may be unused' warnings */
3592 case geo_start: /* new when starting reshape - raid_disks not
3594 layout = mddev->new_layout;
3595 chunk = mddev->new_chunk_sectors;
3596 disks = mddev->raid_disks + mddev->delta_disks;
3601 if (chunk < (PAGE_SIZE >> 9) ||
3602 !is_power_of_2(chunk))
3605 fc = (layout >> 8) & 255;
3606 fo = layout & (1<<16);
3607 geo->raid_disks = disks;
3608 geo->near_copies = nc;
3609 geo->far_copies = fc;
3610 geo->far_offset = fo;
3611 switch (layout >> 17) {
3612 case 0: /* original layout. simple but not always optimal */
3613 geo->far_set_size = disks;
3615 case 1: /* "improved" layout which was buggy. Hopefully no-one is
3616 * actually using this, but leave code here just in case.*/
3617 geo->far_set_size = disks/fc;
3618 WARN(geo->far_set_size < fc,
3619 "This RAID10 layout does not provide data safety - please backup and create new array\n");
3621 case 2: /* "improved" layout fixed to match documentation */
3622 geo->far_set_size = fc * nc;
3624 default: /* Not a valid layout */
3627 geo->chunk_mask = chunk - 1;
3628 geo->chunk_shift = ffz(~chunk);
3632 static struct r10conf *setup_conf(struct mddev *mddev)
3634 struct r10conf *conf = NULL;
3639 copies = setup_geo(&geo, mddev, geo_new);
3642 pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n",
3643 mdname(mddev), PAGE_SIZE);
3647 if (copies < 2 || copies > mddev->raid_disks) {
3648 pr_warn("md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
3649 mdname(mddev), mddev->new_layout);
3654 conf = kzalloc(sizeof(struct r10conf), GFP_KERNEL);
3658 /* FIXME calc properly */
3659 conf->mirrors = kcalloc(mddev->raid_disks + max(0, -mddev->delta_disks),
3660 sizeof(struct raid10_info),
3665 conf->tmppage = alloc_page(GFP_KERNEL);
3670 conf->copies = copies;
3671 err = mempool_init(&conf->r10bio_pool, NR_RAID_BIOS, r10bio_pool_alloc,
3672 rbio_pool_free, conf);
3676 err = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0);
3680 calc_sectors(conf, mddev->dev_sectors);
3681 if (mddev->reshape_position == MaxSector) {
3682 conf->prev = conf->geo;
3683 conf->reshape_progress = MaxSector;
3685 if (setup_geo(&conf->prev, mddev, geo_old) != conf->copies) {
3689 conf->reshape_progress = mddev->reshape_position;
3690 if (conf->prev.far_offset)
3691 conf->prev.stride = 1 << conf->prev.chunk_shift;
3693 /* far_copies must be 1 */
3694 conf->prev.stride = conf->dev_sectors;
3696 conf->reshape_safe = conf->reshape_progress;
3697 spin_lock_init(&conf->device_lock);
3698 INIT_LIST_HEAD(&conf->retry_list);
3699 INIT_LIST_HEAD(&conf->bio_end_io_list);
3701 spin_lock_init(&conf->resync_lock);
3702 init_waitqueue_head(&conf->wait_barrier);
3703 atomic_set(&conf->nr_pending, 0);
3706 conf->thread = md_register_thread(raid10d, mddev, "raid10");
3710 conf->mddev = mddev;
3715 mempool_exit(&conf->r10bio_pool);
3716 kfree(conf->mirrors);
3717 safe_put_page(conf->tmppage);
3718 bioset_exit(&conf->bio_split);
3721 return ERR_PTR(err);
3724 static int raid10_run(struct mddev *mddev)
3726 struct r10conf *conf;
3727 int i, disk_idx, chunk_size;
3728 struct raid10_info *disk;
3729 struct md_rdev *rdev;
3731 sector_t min_offset_diff = 0;
3733 bool discard_supported = false;
3735 if (mddev_init_writes_pending(mddev) < 0)
3738 if (mddev->private == NULL) {
3739 conf = setup_conf(mddev);
3741 return PTR_ERR(conf);
3742 mddev->private = conf;
3744 conf = mddev->private;
3748 if (mddev_is_clustered(conf->mddev)) {
3751 fc = (mddev->layout >> 8) & 255;
3752 fo = mddev->layout & (1<<16);
3753 if (fc > 1 || fo > 0) {
3754 pr_err("only near layout is supported by clustered"
3760 mddev->thread = conf->thread;
3761 conf->thread = NULL;
3763 chunk_size = mddev->chunk_sectors << 9;
3765 blk_queue_max_discard_sectors(mddev->queue,
3766 mddev->chunk_sectors);
3767 blk_queue_max_write_same_sectors(mddev->queue, 0);
3768 blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
3769 blk_queue_io_min(mddev->queue, chunk_size);
3770 if (conf->geo.raid_disks % conf->geo.near_copies)
3771 blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
3773 blk_queue_io_opt(mddev->queue, chunk_size *
3774 (conf->geo.raid_disks / conf->geo.near_copies));
3777 rdev_for_each(rdev, mddev) {
3780 disk_idx = rdev->raid_disk;
3783 if (disk_idx >= conf->geo.raid_disks &&
3784 disk_idx >= conf->prev.raid_disks)
3786 disk = conf->mirrors + disk_idx;
3788 if (test_bit(Replacement, &rdev->flags)) {
3789 if (disk->replacement)
3791 disk->replacement = rdev;
3797 diff = (rdev->new_data_offset - rdev->data_offset);
3798 if (!mddev->reshape_backwards)
3802 if (first || diff < min_offset_diff)
3803 min_offset_diff = diff;
3806 disk_stack_limits(mddev->gendisk, rdev->bdev,
3807 rdev->data_offset << 9);
3809 disk->head_position = 0;
3811 if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
3812 discard_supported = true;
3817 if (discard_supported)
3818 blk_queue_flag_set(QUEUE_FLAG_DISCARD,
3821 blk_queue_flag_clear(QUEUE_FLAG_DISCARD,
3824 /* need to check that every block has at least one working mirror */
3825 if (!enough(conf, -1)) {
3826 pr_err("md/raid10:%s: not enough operational mirrors.\n",
3831 if (conf->reshape_progress != MaxSector) {
3832 /* must ensure that shape change is supported */
3833 if (conf->geo.far_copies != 1 &&
3834 conf->geo.far_offset == 0)
3836 if (conf->prev.far_copies != 1 &&
3837 conf->prev.far_offset == 0)
3841 mddev->degraded = 0;
3843 i < conf->geo.raid_disks
3844 || i < conf->prev.raid_disks;
3847 disk = conf->mirrors + i;
3849 if (!disk->rdev && disk->replacement) {
3850 /* The replacement is all we have - use it */
3851 disk->rdev = disk->replacement;
3852 disk->replacement = NULL;
3853 clear_bit(Replacement, &disk->rdev->flags);
3857 !test_bit(In_sync, &disk->rdev->flags)) {
3858 disk->head_position = 0;
3861 disk->rdev->saved_raid_disk < 0)
3865 if (disk->replacement &&
3866 !test_bit(In_sync, &disk->replacement->flags) &&
3867 disk->replacement->saved_raid_disk < 0) {
3871 disk->recovery_disabled = mddev->recovery_disabled - 1;
3874 if (mddev->recovery_cp != MaxSector)
3875 pr_notice("md/raid10:%s: not clean -- starting background reconstruction\n",
3877 pr_info("md/raid10:%s: active with %d out of %d devices\n",
3878 mdname(mddev), conf->geo.raid_disks - mddev->degraded,
3879 conf->geo.raid_disks);
3881 * Ok, everything is just fine now
3883 mddev->dev_sectors = conf->dev_sectors;
3884 size = raid10_size(mddev, 0, 0);
3885 md_set_array_sectors(mddev, size);
3886 mddev->resync_max_sectors = size;
3887 set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags);
3890 int stripe = conf->geo.raid_disks *
3891 ((mddev->chunk_sectors << 9) / PAGE_SIZE);
3893 /* Calculate max read-ahead size.
3894 * We need to readahead at least twice a whole stripe....
3897 stripe /= conf->geo.near_copies;
3898 if (mddev->queue->backing_dev_info->ra_pages < 2 * stripe)
3899 mddev->queue->backing_dev_info->ra_pages = 2 * stripe;
3902 if (md_integrity_register(mddev))
3905 if (conf->reshape_progress != MaxSector) {
3906 unsigned long before_length, after_length;
3908 before_length = ((1 << conf->prev.chunk_shift) *
3909 conf->prev.far_copies);
3910 after_length = ((1 << conf->geo.chunk_shift) *
3911 conf->geo.far_copies);
3913 if (max(before_length, after_length) > min_offset_diff) {
3914 /* This cannot work */
3915 pr_warn("md/raid10: offset difference not enough to continue reshape\n");
3918 conf->offset_diff = min_offset_diff;
3920 clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
3921 clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
3922 set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
3923 set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
3924 mddev->sync_thread = md_register_thread(md_do_sync, mddev,
3926 if (!mddev->sync_thread)
3933 md_unregister_thread(&mddev->thread);
3934 mempool_exit(&conf->r10bio_pool);
3935 safe_put_page(conf->tmppage);
3936 kfree(conf->mirrors);
3938 mddev->private = NULL;
3943 static void raid10_free(struct mddev *mddev, void *priv)
3945 struct r10conf *conf = priv;
3947 mempool_exit(&conf->r10bio_pool);
3948 safe_put_page(conf->tmppage);
3949 kfree(conf->mirrors);
3950 kfree(conf->mirrors_old);
3951 kfree(conf->mirrors_new);
3952 bioset_exit(&conf->bio_split);
3956 static void raid10_quiesce(struct mddev *mddev, int quiesce)
3958 struct r10conf *conf = mddev->private;
3961 raise_barrier(conf, 0);
3963 lower_barrier(conf);
3966 static int raid10_resize(struct mddev *mddev, sector_t sectors)
3968 /* Resize of 'far' arrays is not supported.
3969 * For 'near' and 'offset' arrays we can set the
3970 * number of sectors used to be an appropriate multiple
3971 * of the chunk size.
3972 * For 'offset', this is far_copies*chunksize.
3973 * For 'near' the multiplier is the LCM of
3974 * near_copies and raid_disks.
3975 * So if far_copies > 1 && !far_offset, fail.
3976 * Else find LCM(raid_disks, near_copy)*far_copies and
3977 * multiply by chunk_size. Then round to this number.
3978 * This is mostly done by raid10_size()
3980 struct r10conf *conf = mddev->private;
3981 sector_t oldsize, size;
3983 if (mddev->reshape_position != MaxSector)
3986 if (conf->geo.far_copies > 1 && !conf->geo.far_offset)
3989 oldsize = raid10_size(mddev, 0, 0);
3990 size = raid10_size(mddev, sectors, 0);
3991 if (mddev->external_size &&
3992 mddev->array_sectors > size)
3994 if (mddev->bitmap) {
3995 int ret = md_bitmap_resize(mddev->bitmap, size, 0, 0);
3999 md_set_array_sectors(mddev, size);
4000 if (sectors > mddev->dev_sectors &&
4001 mddev->recovery_cp > oldsize) {
4002 mddev->recovery_cp = oldsize;
4003 set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
4005 calc_sectors(conf, sectors);
4006 mddev->dev_sectors = conf->dev_sectors;
4007 mddev->resync_max_sectors = size;
4011 static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
4013 struct md_rdev *rdev;
4014 struct r10conf *conf;
4016 if (mddev->degraded > 0) {
4017 pr_warn("md/raid10:%s: Error: degraded raid0!\n",
4019 return ERR_PTR(-EINVAL);
4021 sector_div(size, devs);
4023 /* Set new parameters */
4024 mddev->new_level = 10;
4025 /* new layout: far_copies = 1, near_copies = 2 */
4026 mddev->new_layout = (1<<8) + 2;
4027 mddev->new_chunk_sectors = mddev->chunk_sectors;
4028 mddev->delta_disks = mddev->raid_disks;
4029 mddev->raid_disks *= 2;
4030 /* make sure it will be not marked as dirty */
4031 mddev->recovery_cp = MaxSector;
4032 mddev->dev_sectors = size;
4034 conf = setup_conf(mddev);
4035 if (!IS_ERR(conf)) {
4036 rdev_for_each(rdev, mddev)
4037 if (rdev->raid_disk >= 0) {
4038 rdev->new_raid_disk = rdev->raid_disk * 2;
4039 rdev->sectors = size;
4047 static void *raid10_takeover(struct mddev *mddev)
4049 struct r0conf *raid0_conf;
4051 /* raid10 can take over:
4052 * raid0 - providing it has only two drives
4054 if (mddev->level == 0) {
4055 /* for raid0 takeover only one zone is supported */
4056 raid0_conf = mddev->private;
4057 if (raid0_conf->nr_strip_zones > 1) {
4058 pr_warn("md/raid10:%s: cannot takeover raid 0 with more than one zone.\n",
4060 return ERR_PTR(-EINVAL);
4062 return raid10_takeover_raid0(mddev,
4063 raid0_conf->strip_zone->zone_end,
4064 raid0_conf->strip_zone->nb_dev);
4066 return ERR_PTR(-EINVAL);
4069 static int raid10_check_reshape(struct mddev *mddev)
4071 /* Called when there is a request to change
4072 * - layout (to ->new_layout)
4073 * - chunk size (to ->new_chunk_sectors)
4074 * - raid_disks (by delta_disks)
4075 * or when trying to restart a reshape that was ongoing.
4077 * We need to validate the request and possibly allocate
4078 * space if that might be an issue later.
4080 * Currently we reject any reshape of a 'far' mode array,
4081 * allow chunk size to change if new is generally acceptable,
4082 * allow raid_disks to increase, and allow
4083 * a switch between 'near' mode and 'offset' mode.
4085 struct r10conf *conf = mddev->private;
4088 if (conf->geo.far_copies != 1 && !conf->geo.far_offset)
4091 if (setup_geo(&geo, mddev, geo_start) != conf->copies)
4092 /* mustn't change number of copies */
4094 if (geo.far_copies > 1 && !geo.far_offset)
4095 /* Cannot switch to 'far' mode */
4098 if (mddev->array_sectors & geo.chunk_mask)
4099 /* not factor of array size */
4102 if (!enough(conf, -1))
4105 kfree(conf->mirrors_new);
4106 conf->mirrors_new = NULL;
4107 if (mddev->delta_disks > 0) {
4108 /* allocate new 'mirrors' list */
4110 kcalloc(mddev->raid_disks + mddev->delta_disks,
4111 sizeof(struct raid10_info),
4113 if (!conf->mirrors_new)
4120 * Need to check if array has failed when deciding whether to:
4122 * - remove non-faulty devices
4125 * This determination is simple when no reshape is happening.
4126 * However if there is a reshape, we need to carefully check
4127 * both the before and after sections.
4128 * This is because some failed devices may only affect one
4129 * of the two sections, and some non-in_sync devices may
4130 * be insync in the section most affected by failed devices.
4132 static int calc_degraded(struct r10conf *conf)
4134 int degraded, degraded2;
4139 /* 'prev' section first */
4140 for (i = 0; i < conf->prev.raid_disks; i++) {
4141 struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
4142 if (!rdev || test_bit(Faulty, &rdev->flags))
4144 else if (!test_bit(In_sync, &rdev->flags))
4145 /* When we can reduce the number of devices in
4146 * an array, this might not contribute to
4147 * 'degraded'. It does now.
4152 if (conf->geo.raid_disks == conf->prev.raid_disks)
4156 for (i = 0; i < conf->geo.raid_disks; i++) {
4157 struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
4158 if (!rdev || test_bit(Faulty, &rdev->flags))
4160 else if (!test_bit(In_sync, &rdev->flags)) {
4161 /* If reshape is increasing the number of devices,
4162 * this section has already been recovered, so
4163 * it doesn't contribute to degraded.
4166 if (conf->geo.raid_disks <= conf->prev.raid_disks)
4171 if (degraded2 > degraded)
4176 static int raid10_start_reshape(struct mddev *mddev)
4178 /* A 'reshape' has been requested. This commits
4179 * the various 'new' fields and sets MD_RECOVER_RESHAPE
4180 * This also checks if there are enough spares and adds them
4182 * We currently require enough spares to make the final
4183 * array non-degraded. We also require that the difference
4184 * between old and new data_offset - on each device - is
4185 * enough that we never risk over-writing.
4188 unsigned long before_length, after_length;
4189 sector_t min_offset_diff = 0;
4192 struct r10conf *conf = mddev->private;
4193 struct md_rdev *rdev;
4197 if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
4200 if (setup_geo(&new, mddev, geo_start) != conf->copies)
4203 before_length = ((1 << conf->prev.chunk_shift) *
4204 conf->prev.far_copies);
4205 after_length = ((1 << conf->geo.chunk_shift) *
4206 conf->geo.far_copies);
4208 rdev_for_each(rdev, mddev) {
4209 if (!test_bit(In_sync, &rdev->flags)
4210 && !test_bit(Faulty, &rdev->flags))
4212 if (rdev->raid_disk >= 0) {
4213 long long diff = (rdev->new_data_offset
4214 - rdev->data_offset);
4215 if (!mddev->reshape_backwards)
4219 if (first || diff < min_offset_diff)
4220 min_offset_diff = diff;
4225 if (max(before_length, after_length) > min_offset_diff)
4228 if (spares < mddev->delta_disks)
4231 conf->offset_diff = min_offset_diff;
4232 spin_lock_irq(&conf->device_lock);
4233 if (conf->mirrors_new) {
4234 memcpy(conf->mirrors_new, conf->mirrors,
4235 sizeof(struct raid10_info)*conf->prev.raid_disks);
4237 kfree(conf->mirrors_old);
4238 conf->mirrors_old = conf->mirrors;
4239 conf->mirrors = conf->mirrors_new;
4240 conf->mirrors_new = NULL;
4242 setup_geo(&conf->geo, mddev, geo_start);
4244 if (mddev->reshape_backwards) {
4245 sector_t size = raid10_size(mddev, 0, 0);
4246 if (size < mddev->array_sectors) {
4247 spin_unlock_irq(&conf->device_lock);
4248 pr_warn("md/raid10:%s: array size must be reduce before number of disks\n",
4252 mddev->resync_max_sectors = size;
4253 conf->reshape_progress = size;
4255 conf->reshape_progress = 0;
4256 conf->reshape_safe = conf->reshape_progress;
4257 spin_unlock_irq(&conf->device_lock);
4259 if (mddev->delta_disks && mddev->bitmap) {
4260 struct mdp_superblock_1 *sb = NULL;
4261 sector_t oldsize, newsize;
4263 oldsize = raid10_size(mddev, 0, 0);
4264 newsize = raid10_size(mddev, 0, conf->geo.raid_disks);
4266 if (!mddev_is_clustered(mddev)) {
4267 ret = md_bitmap_resize(mddev->bitmap, newsize, 0, 0);
4274 rdev_for_each(rdev, mddev) {
4275 if (rdev->raid_disk > -1 &&
4276 !test_bit(Faulty, &rdev->flags))
4277 sb = page_address(rdev->sb_page);
4281 * some node is already performing reshape, and no need to
4282 * call md_bitmap_resize again since it should be called when
4283 * receiving BITMAP_RESIZE msg
4285 if ((sb && (le32_to_cpu(sb->feature_map) &
4286 MD_FEATURE_RESHAPE_ACTIVE)) || (oldsize == newsize))
4289 ret = md_bitmap_resize(mddev->bitmap, newsize, 0, 0);
4293 ret = md_cluster_ops->resize_bitmaps(mddev, newsize, oldsize);
4295 md_bitmap_resize(mddev->bitmap, oldsize, 0, 0);
4300 if (mddev->delta_disks > 0) {
4301 rdev_for_each(rdev, mddev)
4302 if (rdev->raid_disk < 0 &&
4303 !test_bit(Faulty, &rdev->flags)) {
4304 if (raid10_add_disk(mddev, rdev) == 0) {
4305 if (rdev->raid_disk >=
4306 conf->prev.raid_disks)
4307 set_bit(In_sync, &rdev->flags);
4309 rdev->recovery_offset = 0;
4311 if (sysfs_link_rdev(mddev, rdev))
4312 /* Failure here is OK */;
4314 } else if (rdev->raid_disk >= conf->prev.raid_disks
4315 && !test_bit(Faulty, &rdev->flags)) {
4316 /* This is a spare that was manually added */
4317 set_bit(In_sync, &rdev->flags);
4320 /* When a reshape changes the number of devices,
4321 * ->degraded is measured against the larger of the
4322 * pre and post numbers.
4324 spin_lock_irq(&conf->device_lock);
4325 mddev->degraded = calc_degraded(conf);
4326 spin_unlock_irq(&conf->device_lock);
4327 mddev->raid_disks = conf->geo.raid_disks;
4328 mddev->reshape_position = conf->reshape_progress;
4329 set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
4331 clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
4332 clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
4333 clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
4334 set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
4335 set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
4337 mddev->sync_thread = md_register_thread(md_do_sync, mddev,
4339 if (!mddev->sync_thread) {
4343 conf->reshape_checkpoint = jiffies;
4344 md_wakeup_thread(mddev->sync_thread);
4345 md_new_event(mddev);
4349 mddev->recovery = 0;
4350 spin_lock_irq(&conf->device_lock);
4351 conf->geo = conf->prev;
4352 mddev->raid_disks = conf->geo.raid_disks;
4353 rdev_for_each(rdev, mddev)
4354 rdev->new_data_offset = rdev->data_offset;
4356 conf->reshape_progress = MaxSector;
4357 conf->reshape_safe = MaxSector;
4358 mddev->reshape_position = MaxSector;
4359 spin_unlock_irq(&conf->device_lock);
4363 /* Calculate the last device-address that could contain
4364 * any block from the chunk that includes the array-address 's'
4365 * and report the next address.
4366 * i.e. the address returned will be chunk-aligned and after
4367 * any data that is in the chunk containing 's'.
4369 static sector_t last_dev_address(sector_t s, struct geom *geo)
4371 s = (s | geo->chunk_mask) + 1;
4372 s >>= geo->chunk_shift;
4373 s *= geo->near_copies;
4374 s = DIV_ROUND_UP_SECTOR_T(s, geo->raid_disks);
4375 s *= geo->far_copies;
4376 s <<= geo->chunk_shift;
4380 /* Calculate the first device-address that could contain
4381 * any block from the chunk that includes the array-address 's'.
4382 * This too will be the start of a chunk
4384 static sector_t first_dev_address(sector_t s, struct geom *geo)
4386 s >>= geo->chunk_shift;
4387 s *= geo->near_copies;
4388 sector_div(s, geo->raid_disks);
4389 s *= geo->far_copies;
4390 s <<= geo->chunk_shift;
4394 static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
4397 /* We simply copy at most one chunk (smallest of old and new)
4398 * at a time, possibly less if that exceeds RESYNC_PAGES,
4399 * or we hit a bad block or something.
4400 * This might mean we pause for normal IO in the middle of
4401 * a chunk, but that is not a problem as mddev->reshape_position
4402 * can record any location.
4404 * If we will want to write to a location that isn't
4405 * yet recorded as 'safe' (i.e. in metadata on disk) then
4406 * we need to flush all reshape requests and update the metadata.
4408 * When reshaping forwards (e.g. to more devices), we interpret
4409 * 'safe' as the earliest block which might not have been copied
4410 * down yet. We divide this by previous stripe size and multiply
4411 * by previous stripe length to get lowest device offset that we
4412 * cannot write to yet.
4413 * We interpret 'sector_nr' as an address that we want to write to.
4414 * From this we use last_device_address() to find where we might
4415 * write to, and first_device_address on the 'safe' position.
4416 * If this 'next' write position is after the 'safe' position,
4417 * we must update the metadata to increase the 'safe' position.
4419 * When reshaping backwards, we round in the opposite direction
4420 * and perform the reverse test: next write position must not be
4421 * less than current safe position.
4423 * In all this the minimum difference in data offsets
4424 * (conf->offset_diff - always positive) allows a bit of slack,
4425 * so next can be after 'safe', but not by more than offset_diff
4427 * We need to prepare all the bios here before we start any IO
4428 * to ensure the size we choose is acceptable to all devices.
4429 * The means one for each copy for write-out and an extra one for
4431 * We store the read-in bio in ->master_bio and the others in
4432 * ->devs[x].bio and ->devs[x].repl_bio.
4434 struct r10conf *conf = mddev->private;
4435 struct r10bio *r10_bio;
4436 sector_t next, safe, last;
4440 struct md_rdev *rdev;
4443 struct bio *bio, *read_bio;
4444 int sectors_done = 0;
4445 struct page **pages;
4447 if (sector_nr == 0) {
4448 /* If restarting in the middle, skip the initial sectors */
4449 if (mddev->reshape_backwards &&
4450 conf->reshape_progress < raid10_size(mddev, 0, 0)) {
4451 sector_nr = (raid10_size(mddev, 0, 0)
4452 - conf->reshape_progress);
4453 } else if (!mddev->reshape_backwards &&
4454 conf->reshape_progress > 0)
4455 sector_nr = conf->reshape_progress;
4457 mddev->curr_resync_completed = sector_nr;
4458 sysfs_notify(&mddev->kobj, NULL, "sync_completed");
4464 /* We don't use sector_nr to track where we are up to
4465 * as that doesn't work well for ->reshape_backwards.
4466 * So just use ->reshape_progress.
4468 if (mddev->reshape_backwards) {
4469 /* 'next' is the earliest device address that we might
4470 * write to for this chunk in the new layout
4472 next = first_dev_address(conf->reshape_progress - 1,
4475 /* 'safe' is the last device address that we might read from
4476 * in the old layout after a restart
4478 safe = last_dev_address(conf->reshape_safe - 1,
4481 if (next + conf->offset_diff < safe)
4484 last = conf->reshape_progress - 1;
4485 sector_nr = last & ~(sector_t)(conf->geo.chunk_mask
4486 & conf->prev.chunk_mask);
4487 if (sector_nr + RESYNC_BLOCK_SIZE/512 < last)
4488 sector_nr = last + 1 - RESYNC_BLOCK_SIZE/512;
4490 /* 'next' is after the last device address that we
4491 * might write to for this chunk in the new layout
4493 next = last_dev_address(conf->reshape_progress, &conf->geo);
4495 /* 'safe' is the earliest device address that we might
4496 * read from in the old layout after a restart
4498 safe = first_dev_address(conf->reshape_safe, &conf->prev);
4500 /* Need to update metadata if 'next' might be beyond 'safe'
4501 * as that would possibly corrupt data
4503 if (next > safe + conf->offset_diff)
4506 sector_nr = conf->reshape_progress;
4507 last = sector_nr | (conf->geo.chunk_mask
4508 & conf->prev.chunk_mask);
4510 if (sector_nr + RESYNC_BLOCK_SIZE/512 <= last)
4511 last = sector_nr + RESYNC_BLOCK_SIZE/512 - 1;
4515 time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) {
4516 /* Need to update reshape_position in metadata */
4518 mddev->reshape_position = conf->reshape_progress;
4519 if (mddev->reshape_backwards)
4520 mddev->curr_resync_completed = raid10_size(mddev, 0, 0)
4521 - conf->reshape_progress;
4523 mddev->curr_resync_completed = conf->reshape_progress;
4524 conf->reshape_checkpoint = jiffies;
4525 set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
4526 md_wakeup_thread(mddev->thread);
4527 wait_event(mddev->sb_wait, mddev->sb_flags == 0 ||
4528 test_bit(MD_RECOVERY_INTR, &mddev->recovery));
4529 if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
4530 allow_barrier(conf);
4531 return sectors_done;
4533 conf->reshape_safe = mddev->reshape_position;
4534 allow_barrier(conf);
4537 raise_barrier(conf, 0);
4539 /* Now schedule reads for blocks from sector_nr to last */
4540 r10_bio = raid10_alloc_init_r10buf(conf);
4542 raise_barrier(conf, 1);
4543 atomic_set(&r10_bio->remaining, 0);
4544 r10_bio->mddev = mddev;
4545 r10_bio->sector = sector_nr;
4546 set_bit(R10BIO_IsReshape, &r10_bio->state);
4547 r10_bio->sectors = last - sector_nr + 1;
4548 rdev = read_balance(conf, r10_bio, &max_sectors);
4549 BUG_ON(!test_bit(R10BIO_Previous, &r10_bio->state));
4552 /* Cannot read from here, so need to record bad blocks
4553 * on all the target devices.
4556 mempool_free(r10_bio, &conf->r10buf_pool);
4557 set_bit(MD_RECOVERY_INTR, &mddev->recovery);
4558 return sectors_done;
4561 read_bio = bio_alloc_mddev(GFP_KERNEL, RESYNC_PAGES, mddev);
4563 bio_set_dev(read_bio, rdev->bdev);
4564 read_bio->bi_iter.bi_sector = (r10_bio->devs[r10_bio->read_slot].addr
4565 + rdev->data_offset);
4566 read_bio->bi_private = r10_bio;
4567 read_bio->bi_end_io = end_reshape_read;
4568 bio_set_op_attrs(read_bio, REQ_OP_READ, 0);
4569 read_bio->bi_flags &= (~0UL << BIO_RESET_BITS);
4570 read_bio->bi_status = 0;
4571 read_bio->bi_vcnt = 0;
4572 read_bio->bi_iter.bi_size = 0;
4573 r10_bio->master_bio = read_bio;
4574 r10_bio->read_slot = r10_bio->devs[r10_bio->read_slot].devnum;
4577 * Broadcast RESYNC message to other nodes, so all nodes would not
4578 * write to the region to avoid conflict.
4580 if (mddev_is_clustered(mddev) && conf->cluster_sync_high <= sector_nr) {
4581 struct mdp_superblock_1 *sb = NULL;
4582 int sb_reshape_pos = 0;
4584 conf->cluster_sync_low = sector_nr;
4585 conf->cluster_sync_high = sector_nr + CLUSTER_RESYNC_WINDOW_SECTORS;
4586 sb = page_address(rdev->sb_page);
4588 sb_reshape_pos = le64_to_cpu(sb->reshape_position);
4590 * Set cluster_sync_low again if next address for array
4591 * reshape is less than cluster_sync_low. Since we can't
4592 * update cluster_sync_low until it has finished reshape.
4594 if (sb_reshape_pos < conf->cluster_sync_low)
4595 conf->cluster_sync_low = sb_reshape_pos;
4598 md_cluster_ops->resync_info_update(mddev, conf->cluster_sync_low,
4599 conf->cluster_sync_high);
4602 /* Now find the locations in the new layout */
4603 __raid10_find_phys(&conf->geo, r10_bio);
4606 read_bio->bi_next = NULL;
4609 for (s = 0; s < conf->copies*2; s++) {
4611 int d = r10_bio->devs[s/2].devnum;
4612 struct md_rdev *rdev2;
4614 rdev2 = rcu_dereference(conf->mirrors[d].replacement);
4615 b = r10_bio->devs[s/2].repl_bio;
4617 rdev2 = rcu_dereference(conf->mirrors[d].rdev);
4618 b = r10_bio->devs[s/2].bio;
4620 if (!rdev2 || test_bit(Faulty, &rdev2->flags))
4623 bio_set_dev(b, rdev2->bdev);
4624 b->bi_iter.bi_sector = r10_bio->devs[s/2].addr +
4625 rdev2->new_data_offset;
4626 b->bi_end_io = end_reshape_write;
4627 bio_set_op_attrs(b, REQ_OP_WRITE, 0);
4632 /* Now add as many pages as possible to all of these bios. */
4635 pages = get_resync_pages(r10_bio->devs[0].bio)->pages;
4636 for (s = 0 ; s < max_sectors; s += PAGE_SIZE >> 9) {
4637 struct page *page = pages[s / (PAGE_SIZE >> 9)];
4638 int len = (max_sectors - s) << 9;
4639 if (len > PAGE_SIZE)
4641 for (bio = blist; bio ; bio = bio->bi_next) {
4643 * won't fail because the vec table is big enough
4644 * to hold all these pages
4646 bio_add_page(bio, page, len, 0);
4648 sector_nr += len >> 9;
4649 nr_sectors += len >> 9;
4652 r10_bio->sectors = nr_sectors;
4654 /* Now submit the read */
4655 md_sync_acct_bio(read_bio, r10_bio->sectors);
4656 atomic_inc(&r10_bio->remaining);
4657 read_bio->bi_next = NULL;
4658 generic_make_request(read_bio);
4659 sectors_done += nr_sectors;
4660 if (sector_nr <= last)
4663 lower_barrier(conf);
4665 /* Now that we have done the whole section we can
4666 * update reshape_progress
4668 if (mddev->reshape_backwards)
4669 conf->reshape_progress -= sectors_done;
4671 conf->reshape_progress += sectors_done;
4673 return sectors_done;
4676 static void end_reshape_request(struct r10bio *r10_bio);
4677 static int handle_reshape_read_error(struct mddev *mddev,
4678 struct r10bio *r10_bio);
4679 static void reshape_request_write(struct mddev *mddev, struct r10bio *r10_bio)
4681 /* Reshape read completed. Hopefully we have a block
4683 * If we got a read error then we do sync 1-page reads from
4684 * elsewhere until we find the data - or give up.
4686 struct r10conf *conf = mddev->private;
4689 if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
4690 if (handle_reshape_read_error(mddev, r10_bio) < 0) {
4691 /* Reshape has been aborted */
4692 md_done_sync(mddev, r10_bio->sectors, 0);
4696 /* We definitely have the data in the pages, schedule the
4699 atomic_set(&r10_bio->remaining, 1);
4700 for (s = 0; s < conf->copies*2; s++) {
4702 int d = r10_bio->devs[s/2].devnum;
4703 struct md_rdev *rdev;
4706 rdev = rcu_dereference(conf->mirrors[d].replacement);
4707 b = r10_bio->devs[s/2].repl_bio;
4709 rdev = rcu_dereference(conf->mirrors[d].rdev);
4710 b = r10_bio->devs[s/2].bio;
4712 if (!rdev || test_bit(Faulty, &rdev->flags)) {
4716 atomic_inc(&rdev->nr_pending);
4718 md_sync_acct_bio(b, r10_bio->sectors);
4719 atomic_inc(&r10_bio->remaining);
4721 generic_make_request(b);
4723 end_reshape_request(r10_bio);
4726 static void end_reshape(struct r10conf *conf)
4728 if (test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery))
4731 spin_lock_irq(&conf->device_lock);
4732 conf->prev = conf->geo;
4733 md_finish_reshape(conf->mddev);
4735 conf->reshape_progress = MaxSector;
4736 conf->reshape_safe = MaxSector;
4737 spin_unlock_irq(&conf->device_lock);
4739 /* read-ahead size must cover two whole stripes, which is
4740 * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
4742 if (conf->mddev->queue) {
4743 int stripe = conf->geo.raid_disks *
4744 ((conf->mddev->chunk_sectors << 9) / PAGE_SIZE);
4745 stripe /= conf->geo.near_copies;
4746 if (conf->mddev->queue->backing_dev_info->ra_pages < 2 * stripe)
4747 conf->mddev->queue->backing_dev_info->ra_pages = 2 * stripe;
4752 static void raid10_update_reshape_pos(struct mddev *mddev)
4754 struct r10conf *conf = mddev->private;
4757 md_cluster_ops->resync_info_get(mddev, &lo, &hi);
4758 if (((mddev->reshape_position <= hi) && (mddev->reshape_position >= lo))
4759 || mddev->reshape_position == MaxSector)
4760 conf->reshape_progress = mddev->reshape_position;
4765 static int handle_reshape_read_error(struct mddev *mddev,
4766 struct r10bio *r10_bio)
4768 /* Use sync reads to get the blocks from somewhere else */
4769 int sectors = r10_bio->sectors;
4770 struct r10conf *conf = mddev->private;
4771 struct r10bio *r10b;
4774 struct page **pages;
4776 r10b = kmalloc(struct_size(r10b, devs, conf->copies), GFP_NOIO);
4778 set_bit(MD_RECOVERY_INTR, &mddev->recovery);
4782 /* reshape IOs share pages from .devs[0].bio */
4783 pages = get_resync_pages(r10_bio->devs[0].bio)->pages;
4785 r10b->sector = r10_bio->sector;
4786 __raid10_find_phys(&conf->prev, r10b);
4791 int first_slot = slot;
4793 if (s > (PAGE_SIZE >> 9))
4798 int d = r10b->devs[slot].devnum;
4799 struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
4802 test_bit(Faulty, &rdev->flags) ||
4803 !test_bit(In_sync, &rdev->flags))
4806 addr = r10b->devs[slot].addr + idx * PAGE_SIZE;
4807 atomic_inc(&rdev->nr_pending);
4809 success = sync_page_io(rdev,
4813 REQ_OP_READ, 0, false);
4814 rdev_dec_pending(rdev, mddev);
4820 if (slot >= conf->copies)
4822 if (slot == first_slot)
4827 /* couldn't read this block, must give up */
4828 set_bit(MD_RECOVERY_INTR,
4840 static void end_reshape_write(struct bio *bio)
4842 struct r10bio *r10_bio = get_resync_r10bio(bio);
4843 struct mddev *mddev = r10_bio->mddev;
4844 struct r10conf *conf = mddev->private;
4848 struct md_rdev *rdev = NULL;
4850 d = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
4852 rdev = conf->mirrors[d].replacement;
4855 rdev = conf->mirrors[d].rdev;
4858 if (bio->bi_status) {
4859 /* FIXME should record badblock */
4860 md_error(mddev, rdev);
4863 rdev_dec_pending(rdev, mddev);
4864 end_reshape_request(r10_bio);
4867 static void end_reshape_request(struct r10bio *r10_bio)
4869 if (!atomic_dec_and_test(&r10_bio->remaining))
4871 md_done_sync(r10_bio->mddev, r10_bio->sectors, 1);
4872 bio_put(r10_bio->master_bio);
4876 static void raid10_finish_reshape(struct mddev *mddev)
4878 struct r10conf *conf = mddev->private;
4880 if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
4883 if (mddev->delta_disks > 0) {
4884 if (mddev->recovery_cp > mddev->resync_max_sectors) {
4885 mddev->recovery_cp = mddev->resync_max_sectors;
4886 set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
4888 mddev->resync_max_sectors = mddev->array_sectors;
4892 for (d = conf->geo.raid_disks ;
4893 d < conf->geo.raid_disks - mddev->delta_disks;
4895 struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
4897 clear_bit(In_sync, &rdev->flags);
4898 rdev = rcu_dereference(conf->mirrors[d].replacement);
4900 clear_bit(In_sync, &rdev->flags);
4904 mddev->layout = mddev->new_layout;
4905 mddev->chunk_sectors = 1 << conf->geo.chunk_shift;
4906 mddev->reshape_position = MaxSector;
4907 mddev->delta_disks = 0;
4908 mddev->reshape_backwards = 0;
4911 static struct md_personality raid10_personality =
4915 .owner = THIS_MODULE,
4916 .make_request = raid10_make_request,
4918 .free = raid10_free,
4919 .status = raid10_status,
4920 .error_handler = raid10_error,
4921 .hot_add_disk = raid10_add_disk,
4922 .hot_remove_disk= raid10_remove_disk,
4923 .spare_active = raid10_spare_active,
4924 .sync_request = raid10_sync_request,
4925 .quiesce = raid10_quiesce,
4926 .size = raid10_size,
4927 .resize = raid10_resize,
4928 .takeover = raid10_takeover,
4929 .check_reshape = raid10_check_reshape,
4930 .start_reshape = raid10_start_reshape,
4931 .finish_reshape = raid10_finish_reshape,
4932 .update_reshape_pos = raid10_update_reshape_pos,
4933 .congested = raid10_congested,
4936 static int __init raid_init(void)
4938 return register_md_personality(&raid10_personality);
4941 static void raid_exit(void)
4943 unregister_md_personality(&raid10_personality);
4946 module_init(raid_init);
4947 module_exit(raid_exit);
4948 MODULE_LICENSE("GPL");
4949 MODULE_DESCRIPTION("RAID10 (striped mirror) personality for MD");
4950 MODULE_ALIAS("md-personality-9"); /* RAID10 */
4951 MODULE_ALIAS("md-raid10");
4952 MODULE_ALIAS("md-level-10");
4954 module_param(max_queued_requests, int, S_IRUGO|S_IWUSR);