Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
[platform/kernel/linux-starfive.git] / drivers / mailbox / Kconfig
1 menuconfig MAILBOX
2         bool "Mailbox Hardware Support"
3         help
4           Mailbox is a framework to control hardware communication between
5           on-chip processors through queued messages and interrupt driven
6           signals. Say Y if your platform supports hardware mailboxes.
7
8 if MAILBOX
9
10 config ARM_MHU
11         tristate "ARM MHU Mailbox"
12         depends on ARM_AMBA
13         help
14           Say Y here if you want to build the ARM MHU controller driver.
15           The controller has 3 mailbox channels, the last of which can be
16           used in Secure mode only.
17
18 config PLATFORM_MHU
19         tristate "Platform MHU Mailbox"
20         depends on OF
21         depends on HAS_IOMEM
22         help
23           Say Y here if you want to build a platform specific variant MHU
24           controller driver.
25           The controller has a maximum of 3 mailbox channels, the last of
26           which can be used in Secure mode only.
27
28 config PL320_MBOX
29         bool "ARM PL320 Mailbox"
30         depends on ARM_AMBA
31         help
32           An implementation of the ARM PL320 Interprocessor Communication
33           Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
34           send short messages between Highbank's A9 cores and the EnergyCore
35           Management Engine, primarily for cpufreq. Say Y here if you want
36           to use the PL320 IPCM support.
37
38 config OMAP2PLUS_MBOX
39         tristate "OMAP2+ Mailbox framework support"
40         depends on ARCH_OMAP2PLUS
41         help
42           Mailbox implementation for OMAP family chips with hardware for
43           interprocessor communication involving DSP, IVA1.0 and IVA2 in
44           OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
45           want to use OMAP2+ Mailbox framework support.
46
47 config OMAP_MBOX_KFIFO_SIZE
48         int "Mailbox kfifo default buffer size (bytes)"
49         depends on OMAP2PLUS_MBOX
50         default 256
51         help
52           Specify the default size of mailbox's kfifo buffers (bytes).
53           This can also be changed at runtime (via the mbox_kfifo_size
54           module parameter).
55
56 config ROCKCHIP_MBOX
57         bool "Rockchip Soc Intergrated Mailbox Support"
58         depends on ARCH_ROCKCHIP || COMPILE_TEST
59         help
60           This driver provides support for inter-processor communication
61           between CPU cores and MCU processor on Some Rockchip SOCs.
62           Please check it that the Soc you use have Mailbox hardware.
63           Say Y here if you want to use the Rockchip Mailbox support.
64
65 config PCC
66         bool "Platform Communication Channel Driver"
67         depends on ACPI
68         default n
69         help
70           ACPI 5.0+ spec defines a generic mode of communication
71           between the OS and a platform such as the BMC. This medium
72           (PCC) is typically used by CPPC (ACPI CPU Performance management),
73           RAS (ACPI reliability protocol) and MPST (ACPI Memory power
74           states). Select this driver if your platform implements the
75           PCC clients mentioned above.
76
77 config ALTERA_MBOX
78         tristate "Altera Mailbox"
79         depends on HAS_IOMEM
80         help
81           An implementation of the Altera Mailbox soft core. It is used
82           to send message between processors. Say Y here if you want to use the
83           Altera mailbox support.
84
85 config BCM2835_MBOX
86         tristate "BCM2835 Mailbox"
87         depends on ARCH_BCM2835
88         help
89           An implementation of the BCM2385 Mailbox.  It is used to invoke
90           the services of the Videocore. Say Y here if you want to use the
91           BCM2835 Mailbox.
92
93 config STI_MBOX
94         tristate "STI Mailbox framework support"
95         depends on ARCH_STI && OF
96         help
97           Mailbox implementation for STMicroelectonics family chips with
98           hardware for interprocessor communication.
99
100 config TI_MESSAGE_MANAGER
101         tristate "Texas Instruments Message Manager Driver"
102         depends on ARCH_KEYSTONE
103         help
104           An implementation of Message Manager slave driver for Keystone
105           architecture SoCs from Texas Instruments. Message Manager is a
106           communication entity found on few of Texas Instrument's keystone
107           architecture SoCs. These may be used for communication between
108           multiple processors within the SoC. Select this driver if your
109           platform has support for the hardware block.
110
111 config HI3660_MBOX
112         tristate "Hi3660 Mailbox"
113         depends on ARCH_HISI && OF
114         help
115           An implementation of the hi3660 mailbox. It is used to send message
116           between application processors and other processors/MCU/DSP. Select
117           Y here if you want to use Hi3660 mailbox controller.
118
119 config HI6220_MBOX
120         tristate "Hi6220 Mailbox"
121         depends on ARCH_HISI
122         help
123           An implementation of the hi6220 mailbox. It is used to send message
124           between application processors and MCU. Say Y here if you want to
125           build Hi6220 mailbox controller driver.
126
127 config MAILBOX_TEST
128         tristate "Mailbox Test Client"
129         depends on OF
130         depends on HAS_IOMEM
131         help
132           Test client to help with testing new Controller driver
133           implementations.
134
135 config QCOM_APCS_IPC
136         tristate "Qualcomm APCS IPC driver"
137         depends on ARCH_QCOM || COMPILE_TEST
138         help
139           Say y here to enable support for the APCS IPC mailbox driver,
140           providing an interface for invoking the inter-process communication
141           signals from the application processor to other masters.
142
143 config TEGRA_HSP_MBOX
144         bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
145         depends on ARCH_TEGRA
146         help
147           The Tegra HSP driver is used for the interprocessor communication
148           between different remote processors and host processors on Tegra186
149           and later SoCs. Say Y here if you want to have this support.
150           If unsure say N.
151
152 config XGENE_SLIMPRO_MBOX
153         tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
154         depends on ARCH_XGENE
155         help
156           An implementation of the APM X-Gene Interprocessor Communication
157           Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
158           It is used to send short messages between ARM64-bit cores and
159           the SLIMpro Management Engine, primarily for PM. Say Y here if you
160           want to use the APM X-Gene SLIMpro IPCM support.
161
162 config BCM_PDC_MBOX
163         tristate "Broadcom FlexSparx DMA Mailbox"
164         depends on ARCH_BCM_IPROC || COMPILE_TEST
165         depends on HAS_DMA
166         help
167           Mailbox implementation for the Broadcom FlexSparx DMA ring manager,
168           which provides access to various offload engines on Broadcom
169           SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2.
170
171 config BCM_FLEXRM_MBOX
172         tristate "Broadcom FlexRM Mailbox"
173         depends on ARM64
174         depends on ARCH_BCM_IPROC || COMPILE_TEST
175         depends on HAS_DMA
176         select GENERIC_MSI_IRQ_DOMAIN
177         default m if ARCH_BCM_IPROC
178         help
179           Mailbox implementation of the Broadcom FlexRM ring manager,
180           which provides access to various offload engines on Broadcom
181           SoCs. Say Y here if you want to use the Broadcom FlexRM.
182 endif