media: rp1: cfe: Use the MIPI_CSI2_DT_xxx defines for csi_dt
[platform/kernel/linux-rpi.git] / drivers / macintosh / windfarm_lm75_sensor.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Windfarm PowerMac thermal control. LM75 sensor
4  *
5  * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
6  *                    <benh@kernel.crashing.org>
7  */
8
9 #include <linux/types.h>
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/slab.h>
14 #include <linux/init.h>
15 #include <linux/wait.h>
16 #include <linux/i2c.h>
17 #include <linux/of.h>
18 #include <asm/machdep.h>
19 #include <asm/io.h>
20 #include <asm/sections.h>
21 #include <asm/pmac_low_i2c.h>
22
23 #include "windfarm.h"
24
25 #define VERSION "1.0"
26
27 #undef DEBUG
28
29 #ifdef DEBUG
30 #define DBG(args...)    printk(args)
31 #else
32 #define DBG(args...)    do { } while(0)
33 #endif
34
35 struct wf_lm75_sensor {
36         unsigned int            ds1775 : 1;
37         unsigned int            inited : 1;
38         struct i2c_client       *i2c;
39         struct wf_sensor        sens;
40 };
41 #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
42
43 static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
44 {
45         struct wf_lm75_sensor *lm = wf_to_lm75(sr);
46         s32 data;
47
48         if (lm->i2c == NULL)
49                 return -ENODEV;
50
51         /* Init chip if necessary */
52         if (!lm->inited) {
53                 u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
54
55                 DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
56                     sr->name, cfg);
57
58                 /* clear shutdown bit, keep other settings as left by
59                  * the firmware for now
60                  */
61                 cfg_new = cfg & ~0x01;
62                 i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
63                 lm->inited = 1;
64
65                 /* If we just powered it up, let's wait 200 ms */
66                 msleep(200);
67         }
68
69         /* Read temperature register */
70         data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
71         data <<= 8;
72         *value = data;
73
74         return 0;
75 }
76
77 static void wf_lm75_release(struct wf_sensor *sr)
78 {
79         struct wf_lm75_sensor *lm = wf_to_lm75(sr);
80
81         kfree(lm);
82 }
83
84 static const struct wf_sensor_ops wf_lm75_ops = {
85         .get_value      = wf_lm75_get,
86         .release        = wf_lm75_release,
87         .owner          = THIS_MODULE,
88 };
89
90 static int wf_lm75_probe(struct i2c_client *client)
91 {
92         const struct i2c_device_id *id = i2c_client_get_device_id(client);
93         struct wf_lm75_sensor *lm;
94         int rc, ds1775;
95         const char *name, *loc;
96
97         if (id)
98                 ds1775 = id->driver_data;
99         else
100                 ds1775 = !!of_device_get_match_data(&client->dev);
101
102         DBG("wf_lm75: creating  %s device at address 0x%02x\n",
103             ds1775 ? "ds1775" : "lm75", client->addr);
104
105         loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
106         if (!loc) {
107                 dev_warn(&client->dev, "Missing hwsensor-location property!\n");
108                 return -ENXIO;
109         }
110
111         /* Usual rant about sensor names not beeing very consistent in
112          * the device-tree, oh well ...
113          * Add more entries below as you deal with more setups
114          */
115         if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
116                 name = "hd-temp";
117         else if (!strcmp(loc, "Incoming Air Temp"))
118                 name = "incoming-air-temp";
119         else if (!strcmp(loc, "ODD Temp"))
120                 name = "optical-drive-temp";
121         else if (!strcmp(loc, "HD Temp"))
122                 name = "hard-drive-temp";
123         else if (!strcmp(loc, "PCI SLOTS"))
124                 name = "slots-temp";
125         else if (!strcmp(loc, "CPU A INLET"))
126                 name = "cpu-inlet-temp-0";
127         else if (!strcmp(loc, "CPU B INLET"))
128                 name = "cpu-inlet-temp-1";
129         else
130                 return -ENXIO;
131         
132
133         lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
134         if (lm == NULL)
135                 return -ENODEV;
136
137         lm->inited = 0;
138         lm->ds1775 = ds1775;
139         lm->i2c = client;
140         lm->sens.name = name;
141         lm->sens.ops = &wf_lm75_ops;
142         i2c_set_clientdata(client, lm);
143
144         rc = wf_register_sensor(&lm->sens);
145         if (rc)
146                 kfree(lm);
147         return rc;
148 }
149
150 static void wf_lm75_remove(struct i2c_client *client)
151 {
152         struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
153
154         /* Mark client detached */
155         lm->i2c = NULL;
156
157         /* release sensor */
158         wf_unregister_sensor(&lm->sens);
159 }
160
161 static const struct i2c_device_id wf_lm75_id[] = {
162         { "MAC,lm75", 0 },
163         { "MAC,ds1775", 1 },
164         { }
165 };
166 MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
167
168 static const struct of_device_id wf_lm75_of_id[] = {
169         { .compatible = "lm75", .data = (void *)0},
170         { .compatible = "ds1775", .data = (void *)1 },
171         { }
172 };
173 MODULE_DEVICE_TABLE(of, wf_lm75_of_id);
174
175 static struct i2c_driver wf_lm75_driver = {
176         .driver = {
177                 .name   = "wf_lm75",
178                 .of_match_table = wf_lm75_of_id,
179         },
180         .probe          = wf_lm75_probe,
181         .remove         = wf_lm75_remove,
182         .id_table       = wf_lm75_id,
183 };
184
185 module_i2c_driver(wf_lm75_driver);
186
187 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
188 MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
189 MODULE_LICENSE("GPL");
190