drivers/leds/leds-lp50xx.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 // TI LP50XX LED chip family driver
   3 // Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/
   4
   5 #include <linux/gpio/consumer.h>
   6 #include <linux/i2c.h>
   7 #include <linux/init.h>
   8 #include <linux/leds.h>
   9 #include <linux/mod_devicetable.h>
  10 #include <linux/module.h>
  11 #include <linux/mutex.h>
  12 #include <linux/regmap.h>
  13 #include <linux/regulator/consumer.h>
  14 #include <linux/slab.h>
  15 #include <uapi/linux/uleds.h>
  16
  17 #include <linux/led-class-multicolor.h>
  18
  19 #include "leds.h"
  20
  21 #define LP50XX_DEV_CFG0         0x00
  22 #define LP50XX_DEV_CFG1         0x01
  23 #define LP50XX_LED_CFG0         0x02
  24
  25 /* LP5009 and LP5012 registers */
  26 #define LP5012_BNK_BRT          0x03
  27 #define LP5012_BNKA_CLR         0x04
  28 #define LP5012_BNKB_CLR         0x05
  29 #define LP5012_BNKC_CLR         0x06
  30 #define LP5012_LED0_BRT         0x07
  31 #define LP5012_OUT0_CLR         0x0b
  32 #define LP5012_RESET            0x17
  33
  34 /* LP5018 and LP5024 registers */
  35 #define LP5024_BNK_BRT          0x03
  36 #define LP5024_BNKA_CLR         0x04
  37 #define LP5024_BNKB_CLR         0x05
  38 #define LP5024_BNKC_CLR         0x06
  39 #define LP5024_LED0_BRT         0x07
  40 #define LP5024_OUT0_CLR         0x0f
  41 #define LP5024_RESET            0x27
  42
  43 /* LP5030 and LP5036 registers */
  44 #define LP5036_LED_CFG1         0x03
  45 #define LP5036_BNK_BRT          0x04
  46 #define LP5036_BNKA_CLR         0x05
  47 #define LP5036_BNKB_CLR         0x06
  48 #define LP5036_BNKC_CLR         0x07
  49 #define LP5036_LED0_BRT         0x08
  50 #define LP5036_OUT0_CLR         0x14
  51 #define LP5036_RESET            0x38
  52
  53 #define LP50XX_SW_RESET         0xff
  54 #define LP50XX_CHIP_EN          BIT(6)
  55
  56 /* There are 3 LED outputs per bank */
  57 #define LP50XX_LEDS_PER_MODULE  3
  58
  59 #define LP5009_MAX_LED_MODULES  2
  60 #define LP5012_MAX_LED_MODULES  4
  61 #define LP5018_MAX_LED_MODULES  6
  62 #define LP5024_MAX_LED_MODULES  8
  63 #define LP5030_MAX_LED_MODULES  10
  64 #define LP5036_MAX_LED_MODULES  12
  65
  66 static const struct reg_default lp5012_reg_defs[] = {
  67         {LP50XX_DEV_CFG0, 0x0},
  68         {LP50XX_DEV_CFG1, 0x3c},
  69         {LP50XX_LED_CFG0, 0x0},
  70         {LP5012_BNK_BRT, 0xff},
  71         {LP5012_BNKA_CLR, 0x0f},
  72         {LP5012_BNKB_CLR, 0x0f},
  73         {LP5012_BNKC_CLR, 0x0f},
  74         {LP5012_LED0_BRT, 0x0f},
  75         /* LEDX_BRT registers are all 0xff for defaults */
  76         {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff},
  77         {LP5012_OUT0_CLR, 0x0f},
  78         /* OUTX_CLR registers are all 0x0 for defaults */
  79         {0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00},
  80         {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, {0x15, 0x00},
  81         {0x16, 0x00},
  82         {LP5012_RESET, 0x00}
  83 };
  84
  85 static const struct reg_default lp5024_reg_defs[] = {
  86         {LP50XX_DEV_CFG0, 0x0},
  87         {LP50XX_DEV_CFG1, 0x3c},
  88         {LP50XX_LED_CFG0, 0x0},
  89         {LP5024_BNK_BRT, 0xff},
  90         {LP5024_BNKA_CLR, 0x0f},
  91         {LP5024_BNKB_CLR, 0x0f},
  92         {LP5024_BNKC_CLR, 0x0f},
  93         {LP5024_LED0_BRT, 0x0f},
  94         /* LEDX_BRT registers are all 0xff for defaults */
  95         {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
  96         {0x0d, 0xff}, {0x0e, 0xff},
  97         {LP5024_OUT0_CLR, 0x0f},
  98         /* OUTX_CLR registers are all 0x0 for defaults */
  99         {0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},
 100         {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
 101         {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
 102         {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
 103         {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00},
 104         {LP5024_RESET, 0x00}
 105 };
 106
 107 static const struct reg_default lp5036_reg_defs[] = {
 108         {LP50XX_DEV_CFG0, 0x0},
 109         {LP50XX_DEV_CFG1, 0x3c},
 110         {LP50XX_LED_CFG0, 0x0},
 111         {LP5036_LED_CFG1, 0x0},
 112         {LP5036_BNK_BRT, 0xff},
 113         {LP5036_BNKA_CLR, 0x0f},
 114         {LP5036_BNKB_CLR, 0x0f},
 115         {LP5036_BNKC_CLR, 0x0f},
 116         {LP5036_LED0_BRT, 0x0f},
 117         /* LEDX_BRT registers are all 0xff for defaults */
 118         {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
 119         {0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff},
 120         {0x12, 0xff}, {0x13, 0xff},
 121         {LP5036_OUT0_CLR, 0x0f},
 122         /* OUTX_CLR registers are all 0x0 for defaults */
 123         {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
 124         {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
 125         {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
 126         {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
 127         {0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00},
 128         {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00},
 129         {0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00},
 130         {LP5036_RESET, 0x00}
 131 };
 132
 133 static const struct regmap_config lp5012_regmap_config = {
 134         .reg_bits = 8,
 135         .val_bits = 8,
 136
 137         .max_register = LP5012_RESET,
 138         .reg_defaults = lp5012_reg_defs,
 139         .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
 140         .cache_type = REGCACHE_FLAT,
 141 };
 142
 143 static const struct regmap_config lp5024_regmap_config = {
 144         .reg_bits = 8,
 145         .val_bits = 8,
 146
 147         .max_register = LP5024_RESET,
 148         .reg_defaults = lp5024_reg_defs,
 149         .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
 150         .cache_type = REGCACHE_FLAT,
 151 };
 152
 153 static const struct regmap_config lp5036_regmap_config = {
 154         .reg_bits = 8,
 155         .val_bits = 8,
 156
 157         .max_register = LP5036_RESET,
 158         .reg_defaults = lp5036_reg_defs,
 159         .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
 160         .cache_type = REGCACHE_FLAT,
 161 };
 162
 163 enum lp50xx_model {
 164         LP5009,
 165         LP5012,
 166         LP5018,
 167         LP5024,
 168         LP5030,
 169         LP5036,
 170 };
 171
 172 /**
 173  * struct lp50xx_chip_info -
 174  * @lp50xx_regmap_config: regmap register configuration
 175  * @model_id: LED device model
 176  * @max_modules: total number of supported LED modules
 177  * @num_leds: number of LED outputs available on the device
 178  * @led_brightness0_reg: first brightness register of the device
 179  * @mix_out0_reg: first color mix register of the device
 180  * @bank_brt_reg: bank brightness register
 181  * @bank_mix_reg: color mix register
 182  * @reset_reg: device reset register
 183  */
 184 struct lp50xx_chip_info {
 185         const struct regmap_config *lp50xx_regmap_config;
 186         int model_id;
 187         u8 max_modules;
 188         u8 num_leds;
 189         u8 led_brightness0_reg;
 190         u8 mix_out0_reg;
 191         u8 bank_brt_reg;
 192         u8 bank_mix_reg;
 193         u8 reset_reg;
 194 };
 195
 196 static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
 197         [LP5009] = {
 198                 .model_id = LP5009,
 199                 .max_modules = LP5009_MAX_LED_MODULES,
 200                 .num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 201                 .led_brightness0_reg = LP5012_LED0_BRT,
 202                 .mix_out0_reg = LP5012_OUT0_CLR,
 203                 .bank_brt_reg = LP5012_BNK_BRT,
 204                 .bank_mix_reg = LP5012_BNKA_CLR,
 205                 .reset_reg = LP5012_RESET,
 206                 .lp50xx_regmap_config = &lp5012_regmap_config,
 207         },
 208         [LP5012] = {
 209                 .model_id = LP5012,
 210                 .max_modules = LP5012_MAX_LED_MODULES,
 211                 .num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 212                 .led_brightness0_reg = LP5012_LED0_BRT,
 213                 .mix_out0_reg = LP5012_OUT0_CLR,
 214                 .bank_brt_reg = LP5012_BNK_BRT,
 215                 .bank_mix_reg = LP5012_BNKA_CLR,
 216                 .reset_reg = LP5012_RESET,
 217                 .lp50xx_regmap_config = &lp5012_regmap_config,
 218         },
 219         [LP5018] = {
 220                 .model_id = LP5018,
 221                 .max_modules = LP5018_MAX_LED_MODULES,
 222                 .num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 223                 .led_brightness0_reg = LP5024_LED0_BRT,
 224                 .mix_out0_reg = LP5024_OUT0_CLR,
 225                 .bank_brt_reg = LP5024_BNK_BRT,
 226                 .bank_mix_reg = LP5024_BNKA_CLR,
 227                 .reset_reg = LP5024_RESET,
 228                 .lp50xx_regmap_config = &lp5024_regmap_config,
 229         },
 230         [LP5024] = {
 231                 .model_id = LP5024,
 232                 .max_modules = LP5024_MAX_LED_MODULES,
 233                 .num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 234                 .led_brightness0_reg = LP5024_LED0_BRT,
 235                 .mix_out0_reg = LP5024_OUT0_CLR,
 236                 .bank_brt_reg = LP5024_BNK_BRT,
 237                 .bank_mix_reg = LP5024_BNKA_CLR,
 238                 .reset_reg = LP5024_RESET,
 239                 .lp50xx_regmap_config = &lp5024_regmap_config,
 240         },
 241         [LP5030] = {
 242                 .model_id = LP5030,
 243                 .max_modules = LP5030_MAX_LED_MODULES,
 244                 .num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 245                 .led_brightness0_reg = LP5036_LED0_BRT,
 246                 .mix_out0_reg = LP5036_OUT0_CLR,
 247                 .bank_brt_reg = LP5036_BNK_BRT,
 248                 .bank_mix_reg = LP5036_BNKA_CLR,
 249                 .reset_reg = LP5036_RESET,
 250                 .lp50xx_regmap_config = &lp5036_regmap_config,
 251         },
 252         [LP5036] = {
 253                 .model_id = LP5036,
 254                 .max_modules = LP5036_MAX_LED_MODULES,
 255                 .num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
 256                 .led_brightness0_reg = LP5036_LED0_BRT,
 257                 .mix_out0_reg = LP5036_OUT0_CLR,
 258                 .bank_brt_reg = LP5036_BNK_BRT,
 259                 .bank_mix_reg = LP5036_BNKA_CLR,
 260                 .reset_reg = LP5036_RESET,
 261                 .lp50xx_regmap_config = &lp5036_regmap_config,
 262         },
 263 };
 264
 265 struct lp50xx_led {
 266         struct led_classdev_mc mc_cdev;
 267         struct lp50xx *priv;
 268         unsigned long bank_modules;
 269         u8 ctrl_bank_enabled;
 270         int led_number;
 271 };
 272
 273 /**
 274  * struct lp50xx -
 275  * @enable_gpio: hardware enable gpio
 276  * @regulator: LED supply regulator pointer
 277  * @client: pointer to the I2C client
 278  * @regmap: device register map
 279  * @dev: pointer to the devices device struct
 280  * @lock: lock for reading/writing the device
 281  * @chip_info: chip specific information (ie num_leds)
 282  * @num_of_banked_leds: holds the number of banked LEDs
 283  * @leds: array of LED strings
 284  */
 285 struct lp50xx {
 286         struct gpio_desc *enable_gpio;
 287         struct regulator *regulator;
 288         struct i2c_client *client;
 289         struct regmap *regmap;
 290         struct device *dev;
 291         struct mutex lock;
 292         const struct lp50xx_chip_info *chip_info;
 293         int num_of_banked_leds;
 294
 295         /* This needs to be at the end of the struct */
 296         struct lp50xx_led leds[];
 297 };
 298
 299 static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
 300 {
 301         return container_of(mc_cdev, struct lp50xx_led, mc_cdev);
 302 }
 303
 304 static int lp50xx_brightness_set(struct led_classdev *cdev,
 305                              enum led_brightness brightness)
 306 {
 307         struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev);
 308         struct lp50xx_led *led = mcled_cdev_to_led(mc_dev);
 309         const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
 310         u8 led_offset, reg_val;
 311         int ret = 0;
 312         int i;
 313
 314         mutex_lock(&led->priv->lock);
 315         if (led->ctrl_bank_enabled)
 316                 reg_val = led_chip->bank_brt_reg;
 317         else
 318                 reg_val = led_chip->led_brightness0_reg +
 319                           led->led_number;
 320
 321         ret = regmap_write(led->priv->regmap, reg_val, brightness);
 322         if (ret) {
 323                 dev_err(led->priv->dev,
 324                         "Cannot write brightness value %d\n", ret);
 325                 goto out;
 326         }
 327
 328         for (i = 0; i < led->mc_cdev.num_colors; i++) {
 329                 if (led->ctrl_bank_enabled) {
 330                         reg_val = led_chip->bank_mix_reg + i;
 331                 } else {
 332                         led_offset = (led->led_number * 3) + i;
 333                         reg_val = led_chip->mix_out0_reg + led_offset;
 334                 }
 335
 336                 ret = regmap_write(led->priv->regmap, reg_val,
 337                                    mc_dev->subled_info[i].intensity);
 338                 if (ret) {
 339                         dev_err(led->priv->dev,
 340                                 "Cannot write intensity value %d\n", ret);
 341                         goto out;
 342                 }
 343         }
 344 out:
 345         mutex_unlock(&led->priv->lock);
 346         return ret;
 347 }
 348
 349 static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
 350 {
 351         u8 led_config_lo, led_config_hi;
 352         u32 bank_enable_mask = 0;
 353         int ret;
 354         int i;
 355
 356         for (i = 0; i < priv->chip_info->max_modules; i++) {
 357                 if (led_banks[i])
 358                         bank_enable_mask |= (1 << led_banks[i]);
 359         }
 360
 361         led_config_lo = bank_enable_mask;
 362         led_config_hi = bank_enable_mask >> 8;
 363
 364         ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
 365         if (ret)
 366                 return ret;
 367
 368         if (priv->chip_info->model_id >= LP5030)
 369                 ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi);
 370
 371         return ret;
 372 }
 373
 374 static int lp50xx_reset(struct lp50xx *priv)
 375 {
 376         return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET);
 377 }
 378
 379 static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable)
 380 {
 381         int ret;
 382
 383         ret = gpiod_direction_output(priv->enable_gpio, enable_disable);
 384         if (ret)
 385                 return ret;
 386
 387         if (enable_disable)
 388                 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
 389         else
 390                 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0);
 391
 392 }
 393
 394 static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
 395                              struct lp50xx_led *led, int num_leds)
 396 {
 397         u32 led_banks[LP5036_MAX_LED_MODULES] = {0};
 398         int led_number;
 399         int ret;
 400
 401         if (num_leds > 1) {
 402                 if (num_leds > priv->chip_info->max_modules) {
 403                         dev_err(priv->dev, "reg property is invalid\n");
 404                         return -EINVAL;
 405                 }
 406
 407                 priv->num_of_banked_leds = num_leds;
 408
 409                 ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds);
 410                 if (ret) {
 411                         dev_err(priv->dev, "reg property is missing\n");
 412                         return ret;
 413                 }
 414
 415                 ret = lp50xx_set_banks(priv, led_banks);
 416                 if (ret) {
 417                         dev_err(priv->dev, "Cannot setup banked LEDs\n");
 418                         return ret;
 419                 }
 420
 421                 led->ctrl_bank_enabled = 1;
 422         } else {
 423                 ret = fwnode_property_read_u32(child, "reg", &led_number);
 424                 if (ret) {
 425                         dev_err(priv->dev, "led reg property missing\n");
 426                         return ret;
 427                 }
 428
 429                 if (led_number > priv->chip_info->num_leds) {
 430                         dev_err(priv->dev, "led-sources property is invalid\n");
 431                         return -EINVAL;
 432                 }
 433
 434                 led->led_number = led_number;
 435         }
 436
 437         return 0;
 438 }
 439
 440 static int lp50xx_probe_dt(struct lp50xx *priv)
 441 {
 442         struct fwnode_handle *child = NULL;
 443         struct fwnode_handle *led_node = NULL;
 444         struct led_init_data init_data = {};
 445         struct led_classdev *led_cdev;
 446         struct mc_subled *mc_led_info;
 447         struct lp50xx_led *led;
 448         int ret = -EINVAL;
 449         int num_colors;
 450         u32 color_id;
 451         int i = 0;
 452
 453         priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW);
 454         if (IS_ERR(priv->enable_gpio))
 455                 return dev_err_probe(priv->dev, PTR_ERR(priv->enable_gpio),
 456                                      "Failed to get enable GPIO\n");
 457
 458         priv->regulator = devm_regulator_get(priv->dev, "vled");
 459         if (IS_ERR(priv->regulator))
 460                 priv->regulator = NULL;
 461
 462         device_for_each_child_node(priv->dev, child) {
 463                 led = &priv->leds[i];
 464                 ret = fwnode_property_count_u32(child, "reg");
 465                 if (ret < 0) {
 466                         dev_err(priv->dev, "reg property is invalid\n");
 467                         goto child_out;
 468                 }
 469
 470                 ret = lp50xx_probe_leds(child, priv, led, ret);
 471                 if (ret)
 472                         goto child_out;
 473
 474                 init_data.fwnode = child;
 475                 num_colors = 0;
 476
 477                 /*
 478                  * There are only 3 LEDs per module otherwise they should be
 479                  * banked which also is presented as 3 LEDs.
 480                  */
 481                 mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE,
 482                                            sizeof(*mc_led_info), GFP_KERNEL);
 483                 if (!mc_led_info) {
 484                         ret = -ENOMEM;
 485                         goto child_out;
 486                 }
 487
 488                 fwnode_for_each_child_node(child, led_node) {
 489                         ret = fwnode_property_read_u32(led_node, "color",
 490                                                        &color_id);
 491                         if (ret) {
 492                                 fwnode_handle_put(led_node);
 493                                 dev_err(priv->dev, "Cannot read color\n");
 494                                 goto child_out;
 495                         }
 496
 497                         mc_led_info[num_colors].color_index = color_id;
 498                         num_colors++;
 499                 }
 500
 501                 led->priv = priv;
 502                 led->mc_cdev.num_colors = num_colors;
 503                 led->mc_cdev.subled_info = mc_led_info;
 504                 led_cdev = &led->mc_cdev.led_cdev;
 505                 led_cdev->brightness_set_blocking = lp50xx_brightness_set;
 506
 507                 ret = devm_led_classdev_multicolor_register_ext(priv->dev,
 508                                                        &led->mc_cdev,
 509                                                        &init_data);
 510                 if (ret) {
 511                         dev_err(priv->dev, "led register err: %d\n", ret);
 512                         goto child_out;
 513                 }
 514                 i++;
 515         }
 516
 517         return 0;
 518
 519 child_out:
 520         fwnode_handle_put(child);
 521         return ret;
 522 }
 523
 524 static int lp50xx_probe(struct i2c_client *client)
 525 {
 526         struct lp50xx *led;
 527         int count;
 528         int ret;
 529
 530         count = device_get_child_node_count(&client->dev);
 531         if (!count) {
 532                 dev_err(&client->dev, "LEDs are not defined in device tree!");
 533                 return -ENODEV;
 534         }
 535
 536         led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
 537                            GFP_KERNEL);
 538         if (!led)
 539                 return -ENOMEM;
 540
 541         mutex_init(&led->lock);
 542         led->client = client;
 543         led->dev = &client->dev;
 544         led->chip_info = device_get_match_data(&client->dev);
 545         i2c_set_clientdata(client, led);
 546         led->regmap = devm_regmap_init_i2c(client,
 547                                         led->chip_info->lp50xx_regmap_config);
 548         if (IS_ERR(led->regmap)) {
 549                 ret = PTR_ERR(led->regmap);
 550                 dev_err(&client->dev, "Failed to allocate register map: %d\n",
 551                         ret);
 552                 return ret;
 553         }
 554
 555         ret = lp50xx_reset(led);
 556         if (ret)
 557                 return ret;
 558
 559         ret = lp50xx_enable_disable(led, 1);
 560         if (ret)
 561                 return ret;
 562
 563         return lp50xx_probe_dt(led);
 564 }
 565
 566 static void lp50xx_remove(struct i2c_client *client)
 567 {
 568         struct lp50xx *led = i2c_get_clientdata(client);
 569         int ret;
 570
 571         ret = lp50xx_enable_disable(led, 0);
 572         if (ret)
 573                 dev_err(led->dev, "Failed to disable chip\n");
 574
 575         if (led->regulator) {
 576                 ret = regulator_disable(led->regulator);
 577                 if (ret)
 578                         dev_err(led->dev, "Failed to disable regulator\n");
 579         }
 580
 581         mutex_destroy(&led->lock);
 582 }
 583
 584 static const struct i2c_device_id lp50xx_id[] = {
 585         { "lp5009", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5009] },
 586         { "lp5012", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5012] },
 587         { "lp5018", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5018] },
 588         { "lp5024", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5024] },
 589         { "lp5030", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5030] },
 590         { "lp5036", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5036] },
 591         { }
 592 };
 593 MODULE_DEVICE_TABLE(i2c, lp50xx_id);
 594
 595 static const struct of_device_id of_lp50xx_leds_match[] = {
 596         { .compatible = "ti,lp5009", .data = &lp50xx_chip_info_tbl[LP5009] },
 597         { .compatible = "ti,lp5012", .data = &lp50xx_chip_info_tbl[LP5012] },
 598         { .compatible = "ti,lp5018", .data = &lp50xx_chip_info_tbl[LP5018] },
 599         { .compatible = "ti,lp5024", .data = &lp50xx_chip_info_tbl[LP5024] },
 600         { .compatible = "ti,lp5030", .data = &lp50xx_chip_info_tbl[LP5030] },
 601         { .compatible = "ti,lp5036", .data = &lp50xx_chip_info_tbl[LP5036] },
 602         {}
 603 };
 604 MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
 605
 606 static struct i2c_driver lp50xx_driver = {
 607         .driver = {
 608                 .name   = "lp50xx",
 609                 .of_match_table = of_lp50xx_leds_match,
 610         },
 611         .probe_new      = lp50xx_probe,
 612         .remove         = lp50xx_remove,
 613         .id_table       = lp50xx_id,
 614 };
 615 module_i2c_driver(lp50xx_driver);
 616
 617 MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
 618 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
 619 MODULE_LICENSE("GPL v2");