1 // SPDX-License-Identifier: GPL-2.0-only
3 * LED driver for TI lp3952 controller
5 * Copyright (C) 2016, DAQRI, LLC.
6 * Author: Tony Makkiel <tony.makkiel@daqri.com>
9 #include <linux/delay.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/i2c.h>
13 #include <linux/kernel.h>
14 #include <linux/leds.h>
15 #include <linux/leds-lp3952.h>
16 #include <linux/module.h>
17 #include <linux/notifier.h>
18 #include <linux/platform_device.h>
20 #include <linux/reboot.h>
21 #include <linux/regmap.h>
23 static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val)
26 struct lp3952_led_array *priv = i2c_get_clientdata(client);
28 ret = regmap_write(priv->regmap, reg, val);
31 dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
32 __func__, reg, val, ret);
36 static void lp3952_on_off(struct lp3952_led_array *priv,
37 enum lp3952_leds led_id, bool on)
41 dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on);
44 if (led_id == LP3952_LED_ALL)
45 val = LP3952_LED_MASK_ALL;
47 ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val,
50 dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret);
54 * Using Imax to control brightness. There are 4 possible
55 * setting 25, 50, 75 and 100 % of Imax. Possible values are
56 * values 0-4. 0 meaning turn off.
58 static int lp3952_set_brightness(struct led_classdev *cdev,
59 enum led_brightness value)
61 unsigned int reg, shift_val;
62 struct lp3952_ctrl_hdl *led = container_of(cdev,
63 struct lp3952_ctrl_hdl,
65 struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv;
67 dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value,
70 if (value == LED_OFF) {
71 lp3952_on_off(priv, led->channel, false);
75 if (led->channel > LP3952_RED_1) {
76 dev_err(cdev->dev, " %s Invalid LED requested", __func__);
80 if (led->channel >= LP3952_BLUE_1) {
81 reg = LP3952_REG_RGB1_MAX_I_CTRL;
82 shift_val = (led->channel - LP3952_BLUE_1) * 2;
84 reg = LP3952_REG_RGB2_MAX_I_CTRL;
85 shift_val = led->channel * 2;
88 /* Enable the LED in case it is not enabled already */
89 lp3952_on_off(priv, led->channel, true);
91 return regmap_update_bits(priv->regmap, reg, 3 << shift_val,
92 --value << shift_val);
95 static int lp3952_get_label(struct device *dev, const char *label, char *dest)
100 ret = device_property_read_string(dev, label, &str);
104 strncpy(dest, str, LP3952_LABEL_MAX_LEN);
108 static int lp3952_register_led_classdev(struct lp3952_led_array *priv)
110 int i, acpi_ret, ret = -ENODEV;
111 static const char *led_name_hdl[LP3952_LED_ALL] = {
120 for (i = 0; i < LP3952_LED_ALL; i++) {
121 acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i],
126 priv->leds[i].cdev.name = priv->leds[i].name;
127 priv->leds[i].cdev.brightness = LED_OFF;
128 priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX;
129 priv->leds[i].cdev.brightness_set_blocking =
130 lp3952_set_brightness;
131 priv->leds[i].channel = i;
132 priv->leds[i].priv = priv;
134 ret = devm_led_classdev_register(&priv->client->dev,
135 &priv->leds[i].cdev);
137 dev_err(&priv->client->dev,
138 "couldn't register LED %s\n",
139 priv->leds[i].cdev.name);
146 static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
147 u8 cmd_index, u8 r, u8 g, u8 b,
148 enum lp3952_tt tt, enum lp3952_cet cet)
151 struct ptrn_gen_cmd line = {
163 if (cmd_index >= LP3952_CMD_REG_COUNT)
166 ret = lp3952_register_write(priv->client,
167 LP3952_REG_CMD_0 + cmd_index * 2,
172 return lp3952_register_write(priv->client,
173 LP3952_REG_CMD_0 + cmd_index * 2 + 1,
177 static int lp3952_configure(struct lp3952_led_array *priv)
181 /* Disable any LEDs on from any previous conf. */
182 ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0);
186 /* enable rgb patter, loop */
187 ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL,
188 LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN);
192 /* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
193 ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
194 LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR);
198 /* Set Cmd1 for RGB intensity,cmd and transition time */
199 return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
203 static const struct regmap_config lp3952_regmap = {
206 .max_register = REG_MAX,
207 .cache_type = REGCACHE_RBTREE,
210 static int lp3952_probe(struct i2c_client *client,
211 const struct i2c_device_id *id)
214 struct lp3952_led_array *priv;
216 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
220 priv->client = client;
222 priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst",
224 if (IS_ERR(priv->enable_gpio)) {
225 status = PTR_ERR(priv->enable_gpio);
226 dev_err(&client->dev, "Failed to enable gpio: %d\n", status);
230 priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
231 if (IS_ERR(priv->regmap)) {
232 int err = PTR_ERR(priv->regmap);
234 dev_err(&client->dev, "Failed to allocate register map: %d\n",
239 i2c_set_clientdata(client, priv);
241 status = lp3952_configure(priv);
243 dev_err(&client->dev, "Probe failed. Device not found (%d)\n",
248 status = lp3952_register_led_classdev(priv);
250 dev_err(&client->dev, "Unable to register led_classdev: %d\n",
258 static void lp3952_remove(struct i2c_client *client)
260 struct lp3952_led_array *priv;
262 priv = i2c_get_clientdata(client);
263 lp3952_on_off(priv, LP3952_LED_ALL, false);
264 gpiod_set_value(priv->enable_gpio, 0);
267 static const struct i2c_device_id lp3952_id[] = {
271 MODULE_DEVICE_TABLE(i2c, lp3952_id);
273 static struct i2c_driver lp3952_i2c_driver = {
277 .probe = lp3952_probe,
278 .remove = lp3952_remove,
279 .id_table = lp3952_id,
282 module_i2c_driver(lp3952_i2c_driver);
284 MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>");
285 MODULE_DESCRIPTION("lp3952 I2C LED controller driver");
286 MODULE_LICENSE("GPL v2");