1 # SPDX-License-Identifier: GPL-2.0-only
2 config LEDS_GPIO_REGISTER
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
12 Say Y to enable Linux LED support. This allows control of supported
13 LEDs from both userspace and optionally, by kernel events (triggers).
18 tristate "LED Class Support"
20 This option enables the LED sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say Y.
23 config LEDS_CLASS_FLASH
24 tristate "LED Flash Class Support"
27 This option enables the flash LED sysfs class in /sys/class/leds.
28 It wraps LED Class and adds flash LEDs specific sysfs attributes
29 and kernel internal API to it. You'll need this to provide support
30 for the flash related features of a LED device. It can be built
33 config LEDS_CLASS_MULTICOLOR
34 tristate "LED Multicolor Class Support"
37 This option enables the multicolor LED sysfs class in /sys/class/leds.
38 It wraps LED class and adds multicolor LED specific sysfs attributes
39 and kernel internal API to it. You'll need this to provide support
40 for multicolor LEDs that are grouped together. This class is not
41 intended for single color LEDs. It can be built as a module.
43 config LEDS_BRIGHTNESS_HW_CHANGED
44 bool "LED Class brightness_hw_changed attribute support"
47 This option enables support for the brightness_hw_changed attribute
48 for LED sysfs class devices under /sys/class/leds.
50 See Documentation/ABI/testing/sysfs-class-led for details.
55 tristate "LED Support for Marvell 88PM860x PMIC"
57 depends on MFD_88PM860X
59 This option enables support for on-chip LED drivers found on Marvell
60 Semiconductor 88PM8606 PMIC.
63 tristate "LED support for Panasonic AN30259A"
64 depends on LEDS_CLASS && I2C && OF
66 This option enables support for the AN30259A 3-channel
69 To compile this driver as a module, choose M here: the module
70 will be called leds-an30259a.
73 tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
77 This driver makes the PC Engines APU1 front panel LEDs
78 accessible from userspace programs through the LED subsystem.
80 If you're looking for APU2/3, use the pcengines-apu2 driver.
81 (symbol CONFIG_PCENGINES_APU2)
83 To compile this driver as a module, choose M here: the
84 module will be called leds-apu.
87 tristate "Dell Wyse 3020 status LED support"
89 depends on (MACH_MMP3_DT && MFD_ENE_KB3930) || COMPILE_TEST
91 This driver adds support for controlling the front panel status
92 LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
95 Say Y to if your machine is a Dell Wyse 3020 thin client.
98 tristate "LED support for Awinic AW20036/AW20054/AW20072"
102 This option enables support for the AW20036/AW20054/AW20072 LED driver.
103 It is a 3x12/6x9/6x12 matrix LED driver programmed via
104 an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
105 3 pattern controllers for auto breathing or group dimming control.
107 To compile this driver as a module, choose M here: the module
108 will be called leds-aw200xx.
111 tristate "LED support for Awinic AW2013"
112 depends on LEDS_CLASS && I2C && OF
114 This option enables support for the AW2013 3-channel
117 To compile this driver as a module, choose M here: the module
118 will be called leds-aw2013.
121 tristate "LED Support for Broadcom BCM6328"
122 depends on LEDS_CLASS
126 This option enables support for LEDs connected to the BCM6328
127 LED HW controller accessed via MMIO registers.
130 tristate "LED Support for Broadcom BCM6358"
131 depends on LEDS_CLASS
135 This option enables support for LEDs connected to the BCM6358
136 LED HW controller accessed via MMIO registers.
138 config LEDS_CHT_WCOVE
139 tristate "LED support for Intel Cherry Trail Whiskey Cove PMIC"
140 depends on LEDS_CLASS
141 depends on INTEL_SOC_PMIC_CHTWC
143 This option enables support for charger and general purpose LEDs
144 connected to the Intel Cherrytrail Whiskey Cove PMIC.
146 To compile this driver as a module, choose M here: the module
147 will be called leds-cht-wcove.
150 tristate "LED Support for Motorola CPCAP"
151 depends on LEDS_CLASS
155 This option enables support for LEDs offered by Motorola's
158 config LEDS_CR0014114
159 tristate "LED Support for Crane CR0014114"
160 depends on LEDS_CLASS
164 This option enables support for CR0014114 LED Board which
165 is widely used in vending machines produced by
166 Crane Merchandising Systems.
168 To compile this driver as a module, choose M here: the module
169 will be called leds-cr0014114.
171 config LEDS_EL15203000
172 tristate "LED Support for Crane EL15203000"
173 depends on LEDS_CLASS
177 This option enables support for EL15203000 LED Board
178 (aka RED LED board) which is widely used in coffee vending
179 machines produced by Crane Merchandising Systems.
181 To compile this driver as a module, choose M here: the module
182 will be called leds-el15203000.
184 config LEDS_TURRIS_OMNIA
185 tristate "LED support for CZ.NIC's Turris Omnia"
186 depends on LEDS_CLASS_MULTICOLOR
188 depends on MACH_ARMADA_38X || COMPILE_TEST
191 This option enables basic support for the LEDs found on the front
192 side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
196 tristate "LCD Backlight driver for LM3530"
197 depends on LEDS_CLASS
200 This option enables support for the LCD backlight using
201 LM3530 ambient light sensor chip. This ALS chip can be
202 controlled manually or using PWM input or using ambient
206 tristate "LCD Backlight driver for LM3532"
208 depends on LEDS_CLASS
211 This option enables support for the LCD backlight using
212 LM3532 ambient light sensor chip. This ALS chip can be
213 controlled manually or using PWM input or using ambient
217 tristate "LED support for LM3533"
218 depends on LEDS_CLASS
219 depends on MFD_LM3533
221 This option enables support for the LEDs on National Semiconductor /
222 TI LM3533 Lighting Power chips.
224 The LEDs can be controlled directly, through PWM input, or by the
225 ambient-light-sensor interface. The chip supports
226 hardware-accelerated blinking with maximum on and off periods of 9.8
227 and 77 seconds respectively.
230 tristate "LED support for LM3642 Chip"
231 depends on LEDS_CLASS && I2C
234 This option enables support for LEDs connected to LM3642.
235 The LM3642 is a 4MHz fixed-frequency synchronous boost
236 converter plus 1.5A constant current driver for a high-current
240 tristate "LED support for LM3692x Chips"
241 depends on LEDS_CLASS && I2C && OF
244 This option enables support for the TI LM3692x family
245 of white LED string drivers used for backlighting.
248 tristate "LED Support for Locomo device"
249 depends on LEDS_CLASS
250 depends on SHARP_LOCOMO
252 This option enables support for the LEDs on Sharp Locomo.
253 Zaurus models SL-5500 and SL-5600.
255 config LEDS_MIKROTIK_RB532
256 tristate "LED Support for Mikrotik Routerboard 532"
257 depends on LEDS_CLASS
258 depends on MIKROTIK_RB532
260 This option enables support for the so called "User LED" of
261 Mikrotik's Routerboard 532.
264 tristate "LED Support for Mediatek MT6323 PMIC"
265 depends on LEDS_CLASS
266 depends on MFD_MT6397
268 This option enables support for on-chip LED drivers found on
269 Mediatek MT6323 PMIC.
272 tristate "LED Support for Soekris net48xx series Error LED"
273 depends on LEDS_CLASS
274 depends on SCx200_GPIO
276 This option enables support for the Soekris net4801 and net4826 error
280 tristate "LED Support for the WRAP series LEDs"
281 depends on LEDS_CLASS
282 depends on SCx200_GPIO
284 This option enables support for the PCEngines WRAP programmable LEDs.
286 config LEDS_COBALT_QUBE
287 tristate "LED Support for the Cobalt Qube series front LED"
288 depends on LEDS_CLASS
289 depends on MIPS_COBALT || COMPILE_TEST
291 This option enables support for the front LED on Cobalt Qube series
293 config LEDS_COBALT_RAQ
294 bool "LED Support for the Cobalt Raq series"
295 depends on LEDS_CLASS=y && (MIPS_COBALT || COMPILE_TEST)
298 This option enables support for the Cobalt Raq series LEDs.
301 tristate "LED support for SunFire servers."
302 depends on LEDS_CLASS
306 This option enables support for the Left, Middle, and Right
307 LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
309 config LEDS_IPAQ_MICRO
310 tristate "LED Support for the Compaq iPAQ h3xxx"
311 depends on LEDS_CLASS
312 depends on MFD_IPAQ_MICRO
314 Choose this option if you want to use the notification LED on
315 Compaq/HP iPAQ h3100 and h3600.
318 tristate "LED Support for the HP Jornada 6xx"
319 depends on LEDS_CLASS
322 This option enables LED support for the handheld
323 HP Jornada 620/660/680/690.
326 tristate "LED driver for PCA9532 dimmer"
327 depends on LEDS_CLASS
328 depends on I2C && INPUT
330 This option enables support for NXP pca9532
331 LED controller. It is generally only useful
334 config LEDS_PCA9532_GPIO
335 bool "Enable GPIO support for PCA9532"
336 depends on LEDS_PCA9532
339 Allow unused pins on PCA9532 to be used as gpio.
341 To use a pin as gpio pca9532_type in pca9532_platform data needs to
342 set to PCA9532_TYPE_GPIO.
345 tristate "LED Support for GPIO connected LEDs"
346 depends on LEDS_CLASS
347 depends on GPIOLIB || COMPILE_TEST
349 This option enables support for the LEDs connected to GPIO
350 outputs. To be useful the particular board must have LEDs
351 and they must be connected to the GPIO lines. The LEDs must be
352 defined as platform devices and/or OpenFirmware platform devices.
353 The code to use these bindings can be selected below.
356 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
357 depends on LEDS_CLASS
360 This option enables support for LEDs connected to the National
361 Semiconductor LP3944 Lighting Management Unit (LMU) also known as
364 To compile this driver as a module, choose M here: the
365 module will be called leds-lp3944.
368 tristate "LED Support for TI LP3952 2 channel LED driver"
369 depends on LEDS_CLASS
374 This option enables support for LEDs connected to the Texas
375 Instruments LP3952 LED driver.
377 To compile this driver as a module, choose M here: the
378 module will be called leds-lp3952.
381 tristate "LED Support for TI LP5036/30/24/18/12/09 LED driver chip"
382 depends on LEDS_CLASS && REGMAP_I2C
383 depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
385 If you say yes here you get support for the Texas Instruments
386 LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
388 To compile this driver as a module, choose M here: the
389 module will be called leds-lp50xx.
391 config LEDS_LP55XX_COMMON
392 tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
393 depends on LEDS_CLASS
394 depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
398 select FW_LOADER_USER_HELPER
400 This option supports common operations for LP5521/5523/55231/5562/8501
404 tristate "LED Support for N.S. LP5521 LED driver chip"
405 depends on LEDS_CLASS && I2C
406 depends on LEDS_LP55XX_COMMON
408 If you say yes here you get support for the National Semiconductor
409 LP5521 LED driver. It is 3 channel chip with programmable engines.
410 Driver provides direct control via LED class and interface for
411 programming the engines.
414 tristate "LED Support for TI/National LP5523/55231 LED driver chip"
415 depends on LEDS_CLASS && I2C
416 depends on LEDS_LP55XX_COMMON
418 If you say yes here you get support for TI/National Semiconductor
419 LP5523/55231 LED driver.
420 It is 9 channel chip with programmable engines.
421 Driver provides direct control via LED class and interface for
422 programming the engines.
425 tristate "LED Support for TI LP5562 LED driver chip"
426 depends on LEDS_CLASS && I2C
427 depends on LEDS_LP55XX_COMMON
429 If you say yes here you get support for TI LP5562 LED driver.
430 It is 4 channels chip with programmable engines.
431 Driver provides direct control via LED class and interface for
432 programming the engines.
435 tristate "LED Support for TI LP8501 LED driver chip"
436 depends on LEDS_CLASS && I2C
437 depends on LEDS_LP55XX_COMMON
439 If you say yes here you get support for TI LP8501 LED driver.
440 It is 9 channel chip with programmable engines.
441 Driver provides direct control via LED class and interface for
442 programming the engines.
443 It is similar as LP5523, but output power selection is available.
444 And register layout and engine program schemes are different.
447 tristate "LED support for the TI LP8788 PMIC"
448 depends on LEDS_CLASS
449 depends on MFD_LP8788
451 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
454 tristate "LED support for the TI LP8860 4 channel LED driver"
455 depends on LEDS_CLASS && I2C && OF
458 If you say yes here you get support for the TI LP8860 4 channel
460 This option enables support for the display cluster LEDs
461 on the LP8860 4 channel LED driver using the I2C communication
464 config LEDS_CLEVO_MAIL
465 tristate "Mail LED on Clevo notebook"
466 depends on LEDS_CLASS && BROKEN
467 depends on X86 && SERIO_I8042 && DMI
469 This driver makes the mail LED accessible from userspace
470 programs through the LEDs subsystem. This LED has three
471 known modes: off, blink at 0.5Hz and blink at 1Hz.
473 The driver supports two kinds of interface: using ledtrig-timer
474 or through /sys/class/leds/clevo::mail/brightness. As this LED
475 cannot change its brightness it blinks instead. The brightness
476 value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
479 This module can drive the mail LED for the following notebooks:
484 Clevo D400V/D470V (not tested, but might work)
486 Clevo M5x0N (not tested, but might work)
487 Positivo Mobile (Clevo M5x0V)
489 If your model is not listed here you can try the "nodetect"
492 To compile this driver as a module, choose M here: the
493 module will be called leds-clevo-mail.
496 tristate "LED Support for PCA955x I2C chips"
497 depends on LEDS_CLASS
500 This option enables support for LEDs connected to PCA955x
501 LED driver chips accessed via the I2C bus. Supported
502 devices include PCA9550, PCA9551, PCA9552, and PCA9553.
504 config LEDS_PCA955X_GPIO
505 bool "Enable GPIO support for PCA955X"
506 depends on LEDS_PCA955X
509 Allow unused pins on PCA955X to be used as gpio.
511 To use a pin as gpio the pin type should be set to
512 PCA955X_TYPE_GPIO in the device tree.
516 tristate "LED support for PCA963x I2C chip"
517 depends on LEDS_CLASS
520 This option enables support for LEDs connected to the PCA963x
521 LED driver chip accessed via the I2C bus. Supported
522 devices include PCA9633 and PCA9634
524 config LEDS_WM831X_STATUS
525 tristate "LED support for status LEDs on WM831x PMICs"
526 depends on LEDS_CLASS
527 depends on MFD_WM831X
529 This option enables support for the status LEDs of the WM831x
533 tristate "LED Support for WM8350 AudioPlus PMIC"
534 depends on LEDS_CLASS
535 depends on MFD_WM8350
537 This option enables support for LEDs driven by the Wolfson
538 Microelectronics WM8350 AudioPlus PMIC.
541 tristate "LED Support for DA9030/DA9034 PMIC"
542 depends on LEDS_CLASS
543 depends on PMIC_DA903X
545 This option enables support for on-chip LED drivers found
546 on Dialog Semiconductor DA9030/DA9034 PMICs.
549 tristate "Dialog DA9052/DA9053 LEDS"
550 depends on LEDS_CLASS
551 depends on PMIC_DA9052
553 This option enables support for on-chip LED drivers found
554 on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
556 config LEDS_DAC124S085
557 tristate "LED Support for DAC124S085 SPI DAC"
558 depends on LEDS_CLASS
561 This option enables support for DAC124S085 SPI DAC from NatSemi,
562 which can be used to control up to four LEDs.
565 tristate "PWM driven LED Support"
566 depends on LEDS_CLASS
569 This option enables support for pwm driven LEDs
571 config LEDS_REGULATOR
572 tristate "REGULATOR driven LED support"
573 depends on LEDS_CLASS
576 This option enables support for regulator driven LEDs.
578 config LEDS_BD2606MVV
579 tristate "LED driver for BD2606MVV"
580 depends on LEDS_CLASS
584 This option enables support for BD2606MVV LED driver chips
585 accessed via the I2C bus. It supports setting brightness, with
586 the limitiation that there are groups of two channels sharing
587 a brightness setting, but not the on/off setting.
589 To compile this driver as a module, choose M here: the module will
590 be called leds-bd2606mvv.
593 tristate "LED driver for BD2802 RGB LED"
594 depends on LEDS_CLASS
597 This option enables support for BD2802GU RGB LED driver chips
598 accessed via the I2C bus.
600 config LEDS_INTEL_SS4200
601 tristate "LED driver for Intel NAS SS4200 series"
602 depends on LEDS_CLASS
603 depends on PCI && DMI
606 This option enables support for the Intel SS4200 series of
607 Network Attached Storage servers. You may control the hard
608 drive or power LEDs on the front panel. Using this driver
609 can stop the front LED from blinking after startup.
612 tristate "LED driver for LT3593 controllers"
613 depends on LEDS_CLASS
614 depends on GPIOLIB || COMPILE_TEST
616 This option enables support for LEDs driven by a Linear Technology
617 LT3593 controller. This controller uses a special one-wire pulse
618 coding protocol to set the brightness.
621 tristate "LED Support for ADP5520/ADP5501 PMIC"
622 depends on LEDS_CLASS
623 depends on PMIC_ADP5520
625 This option enables support for on-chip LED drivers found
626 on Analog Devices ADP5520/ADP5501 PMICs.
628 To compile this driver as a module, choose M here: the module will
629 be called leds-adp5520.
632 tristate "LED Support for MC13XXX PMIC"
633 depends on LEDS_CLASS
634 depends on MFD_MC13XXX
636 This option enables support for on-chip LED drivers found
637 on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
640 tristate "LED support for Network Space v2 GPIO LEDs"
641 depends on LEDS_CLASS
642 depends on MACH_KIRKWOOD || MACH_ARMADA_370 || COMPILE_TEST
645 This option enables support for the dual-GPIO LEDs found on the
646 following LaCie/Seagate boards:
648 Network Space v2 (and parents: Max, Mini)
651 n090401 (Seagate NAS 4-Bay)
654 tristate "LED support for Big Network series LEDs"
655 depends on LEDS_CLASS
656 depends on MACH_KIRKWOOD || COMPILE_TEST
660 This option enables support for LEDs found on the LaCie 2Big
661 and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
662 controlled through a GPIO extension bus.
665 tristate "LED Support for TCA6507 I2C chip"
666 depends on LEDS_CLASS && I2C
668 This option enables support for LEDs connected to TC6507
669 LED driver chips accessed via the I2C bus.
670 Driver support brightness control and hardware-assisted blinking.
673 tristate "LED driver for TLC59108 and TLC59116 controllers"
674 depends on LEDS_CLASS && I2C
677 This option enables support for Texas Instruments TLC59108
678 and TLC59116 LED controllers.
681 tristate "LED support for Maxim MAX77650 PMIC"
682 depends on LEDS_CLASS && MFD_MAX77650
684 LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
687 tristate "LED support for MAX8997 PMIC"
688 depends on LEDS_CLASS && MFD_MAX8997
690 This option enables support for on-chip LED drivers on
694 tristate "LED support for LM3554 and LM3556 chips"
695 depends on LEDS_CLASS && I2C
698 This option enables support for LEDs connected to LM3554
699 and LM3556. It includes Torch, Flash and Indicator functions.
702 tristate "LED support for the Bachmann OT200"
703 depends on LEDS_CLASS && HAS_IOPORT && (X86_32 || COMPILE_TEST)
705 This option enables support for the LEDs on the Bachmann OT200.
706 Say Y to enable LEDs on the Bachmann OT200.
708 config LEDS_MENF21BMC
709 tristate "LED support for the MEN 14F021P00 BMC"
710 depends on LEDS_CLASS && MFD_MENF21BMC
712 Say Y here to include support for the MEN 14F021P00 BMC LEDs.
714 This driver can also be built as a module. If so the module
715 will be called leds-menf21bmc.
717 config LEDS_IS31FL319X
718 tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
719 depends on LEDS_CLASS && I2C
722 This option enables support for LEDs connected to ISSI IS31FL319x
723 fancy LED driver chips accessed via the I2C bus.
724 Driver supports individual PWM brightness control for each channel.
726 This driver can also be built as a module. If so the module will be
727 called leds-is31fl319x.
729 config LEDS_IS31FL32XX
730 tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
731 depends on LEDS_CLASS && I2C && OF
733 Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
734 LED controllers. They are I2C devices with multiple constant-current
735 channels, each with independent 256-level PWM control.
737 config LEDS_SC27XX_BLTC
738 tristate "LED support for the SC27xx breathing light controller"
739 depends on LEDS_CLASS && MFD_SC27XX_PMIC
742 Say Y here to include support for the SC27xx breathing light controller
745 This driver can also be built as a module. If so the module will be
746 called leds-sc27xx-bltc.
748 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
751 tristate "LED support for the BlinkM I2C RGB LED"
752 depends on LEDS_CLASS
755 This option enables support for the BlinkM RGB LED connected
756 through I2C. Say Y to enable support for the BlinkM LED.
759 tristate "LED support for PowerNV Platform"
760 depends on LEDS_CLASS
761 depends on PPC_POWERNV
764 This option enables support for the system LEDs present on
765 PowerNV platforms. Say 'y' to enable this support in kernel.
766 To compile this driver as a module, choose 'm' here: the module
767 will be called leds-powernv.
770 bool "LED support for LEDs on system controllers"
771 depends on LEDS_CLASS=y
772 depends on MFD_SYSCON
775 This option enables support for the LEDs on syscon type
776 devices. This will only work with device tree enabled
780 tristate "LED Support for the Qualcomm PM8058 PMIC"
781 depends on MFD_PM8XXX
782 depends on LEDS_CLASS
784 Choose this option if you want to use the LED drivers in
785 the Qualcomm PM8058 PMIC.
788 tristate "LED support for the Mellanox boards"
789 depends on X86 && DMI
790 depends on LEDS_CLASS
792 This option enables support for the LEDs on the Mellanox
793 boards. Say Y to enable these.
796 tristate "LED support for the Mellanox switches management control"
797 depends on LEDS_CLASS
799 This option enables support for the LEDs on the Mellanox Ethernet and
800 InfiniBand switches. The driver can be activated by the platform device
801 device add call. Say Y to enable these. To compile this driver as a
802 module, choose 'M' here: the module will be called leds-mlxreg.
805 tristate "Userspace LED support"
806 depends on LEDS_CLASS
808 This option enables support for userspace LEDs. Say 'y' to enable this
809 support in kernel. To compile this driver as a module, choose 'm' here:
810 the module will be called uleds.
813 tristate "LED support for NI PXI NIC78bx devices"
814 depends on LEDS_CLASS
815 depends on X86 && ACPI
817 This option enables support for the User1 and User2 LEDs on NI
820 To compile this driver as a module, choose M here: the module
821 will be called leds-nic78bx.
824 tristate "LED support for SPI LED controller with a single byte"
825 depends on LEDS_CLASS
829 This option enables support for LED controller which use a single byte
830 for controlling the brightness. Currently the following controller is
831 supported: Ubiquiti airCube ISP microcontroller based LED controller.
833 config LEDS_TI_LMU_COMMON
834 tristate "LED driver for TI LMU" if COMPILE_TEST
837 Say Y to enable the LED driver for TI LMU devices.
838 This supports common features between the TI LM3532, LM3631, LM3632,
839 LM3633, LM3695 and LM3697.
842 tristate "LED driver for LM3697"
843 depends on LEDS_CLASS && I2C && OF
844 select LEDS_TI_LMU_COMMON
846 Say Y to enable the LM3697 LED driver for TI LMU devices.
847 This supports the LED device LM3697.
850 tristate "LED driver for LM36274"
851 depends on LEDS_CLASS && MFD_TI_LMU
852 select LEDS_TI_LMU_COMMON
854 Say Y to enable the LM36274 LED driver for TI LMU devices.
855 This supports the LED device LM36274.
858 tristate "LED support for TI TPS6105X"
859 depends on LEDS_CLASS
861 default y if TPS6105X
863 This driver supports TPS61050/TPS61052 LED chips.
864 It is a single boost converter primarily for white LEDs and
868 tristate "LED support for SGI Octane machines"
869 depends on LEDS_CLASS
870 depends on SGI_MFD_IOC3 || COMPILE_TEST
872 This option enables support for the Red and White LEDs of
875 To compile this driver as a module, choose M here: the module
876 will be called leds-ip30.
878 config LEDS_ACER_A500
879 tristate "Power button LED support for Acer Iconia Tab A500"
880 depends on LEDS_CLASS && MFD_ACER_A500_EC
882 This option enables support for the Power Button LED of
883 Acer Iconia Tab A500.
885 source "drivers/leds/blink/Kconfig"
887 comment "Flash and Torch LED drivers"
888 source "drivers/leds/flash/Kconfig"
890 comment "RGB LED drivers"
891 source "drivers/leds/rgb/Kconfig"
893 comment "LED Triggers"
894 source "drivers/leds/trigger/Kconfig"
896 comment "Simple LED drivers"
897 source "drivers/leds/simple/Kconfig"