2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_ATMEL_MXT_T37
119 bool "Support T37 Diagnostic Data"
120 depends on TOUCHSCREEN_ATMEL_MXT
121 depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
122 select VIDEOBUF2_VMALLOC
124 Say Y here if you want support to output data from the T37
125 Diagnostic Data object using a V4L device.
127 config TOUCHSCREEN_AUO_PIXCIR
128 tristate "AUO in-cell touchscreen using Pixcir ICs"
130 depends on GPIOLIB || COMPILE_TEST
132 Say Y here if you have a AUO display with in-cell touchscreen
137 To compile this driver as a module, choose M here: the
138 module will be called auo-pixcir-ts.
140 config TOUCHSCREEN_BU21013
141 tristate "BU21013 based touch panel controllers"
144 Say Y here if you have a bu21013 touchscreen connected to
149 To compile this driver as a module, choose M here: the
150 module will be called bu21013_ts.
152 config TOUCHSCREEN_CHIPONE_ICN8318
153 tristate "chipone icn8318 touchscreen controller"
154 depends on GPIOLIB || COMPILE_TEST
158 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
162 To compile this driver as a module, choose M here: the
163 module will be called chipone_icn8318.
165 config TOUCHSCREEN_CY8CTMG110
166 tristate "cy8ctmg110 touchscreen"
168 depends on GPIOLIB || COMPILE_TEST
170 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
175 To compile this driver as a module, choose M here: the
176 module will be called cy8ctmg110_ts.
178 config TOUCHSCREEN_CYTTSP_CORE
179 tristate "Cypress TTSP touchscreen"
181 Say Y here if you have a touchscreen using controller from
182 the Cypress TrueTouch(tm) Standard Product family connected
183 to your system. You will also need to select appropriate
184 bus connection below.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_core.
191 config TOUCHSCREEN_CYTTSP_I2C
192 tristate "support I2C bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
195 Say Y here if the touchscreen is connected via I2C bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_i2c.
200 config TOUCHSCREEN_CYTTSP_SPI
201 tristate "support SPI bus connection"
202 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
204 Say Y here if the touchscreen is connected via SPI bus.
206 To compile this driver as a module, choose M here: the
207 module will be called cyttsp_spi.
209 config TOUCHSCREEN_CYTTSP4_CORE
210 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
212 Core driver for Cypress TrueTouch(tm) Standard Product
213 Generation4 touchscreen controllers.
215 Say Y here if you have a Cypress Gen4 touchscreen.
219 To compile this driver as a module, choose M here.
221 config TOUCHSCREEN_CYTTSP4_I2C
222 tristate "support I2C bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
225 Say Y here if the touchscreen is connected via I2C bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_i2c.
230 config TOUCHSCREEN_CYTTSP4_SPI
231 tristate "support SPI bus connection"
232 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
234 Say Y here if the touchscreen is connected via SPI bus.
236 To compile this driver as a module, choose M here: the
237 module will be called cyttsp4_spi.
239 config TOUCHSCREEN_DA9034
240 tristate "Touchscreen support for Dialog Semiconductor DA9034"
241 depends on PMIC_DA903X
244 Say Y here to enable the support for the touchscreen found
245 on Dialog Semiconductor DA9034 PMIC.
249 To compile this driver as a module, choose M here: the
250 module will be called da9034-ts.
252 config TOUCHSCREEN_DA9052
253 tristate "Dialog DA9052/DA9053 TSI"
254 depends on PMIC_DA9052
256 Say Y here to support the touchscreen found on Dialog Semiconductor
257 DA9052-BC and DA9053-AA/Bx PMICs.
261 To compile this driver as a module, choose M here: the
262 module will be called da9052_tsi.
264 config TOUCHSCREEN_DYNAPRO
265 tristate "Dynapro serial touchscreen"
268 Say Y here if you have a Dynapro serial touchscreen connected to
273 To compile this driver as a module, choose M here: the
274 module will be called dynapro.
276 config TOUCHSCREEN_HAMPSHIRE
277 tristate "Hampshire serial touchscreen"
280 Say Y here if you have a Hampshire serial touchscreen connected to
285 To compile this driver as a module, choose M here: the
286 module will be called hampshire.
288 config TOUCHSCREEN_EETI
289 tristate "EETI touchscreen panel support"
292 Say Y here to enable support for I2C connected EETI touch panels.
294 To compile this driver as a module, choose M here: the
295 module will be called eeti_ts.
297 config TOUCHSCREEN_EGALAX
298 tristate "EETI eGalax multi-touch panel support"
301 Say Y here to enable support for I2C connected EETI
302 eGalax multi-touch panels.
304 To compile this driver as a module, choose M here: the
305 module will be called egalax_ts.
307 config TOUCHSCREEN_EGALAX_SERIAL
308 tristate "EETI eGalax serial touchscreen"
311 Say Y here to enable support for serial connected EETI
314 To compile this driver as a module, choose M here: the
315 module will be called egalax_ts_serial.
317 config TOUCHSCREEN_FUJITSU
318 tristate "Fujitsu serial touchscreen"
321 Say Y here if you have the Fujitsu touchscreen (such as one
322 installed in Lifebook P series laptop) connected to your
327 To compile this driver as a module, choose M here: the
328 module will be called fujitsu-ts.
330 config TOUCHSCREEN_GOODIX
331 tristate "Goodix I2C touchscreen"
333 depends on GPIOLIB || COMPILE_TEST
335 Say Y here if you have the Goodix touchscreen (such as one
336 installed in Onda v975w tablets) connected to your
337 system. It also supports 5-finger chip models, which can be
338 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
342 To compile this driver as a module, choose M here: the
343 module will be called goodix.
345 config TOUCHSCREEN_ILI210X
346 tristate "Ilitek ILI210X based touchscreen"
349 Say Y here if you have a ILI210X based touchscreen
350 controller. This driver supports models ILI2102,
351 ILI2102s, ILI2103, ILI2103s and ILI2105.
352 Such kind of chipsets can be found in Amazon Kindle Fire
357 To compile this driver as a module, choose M here: the
358 module will be called ili210x.
360 config TOUCHSCREEN_IPROC
361 tristate "IPROC touch panel driver support"
362 depends on ARCH_BCM_IPROC || COMPILE_TEST
364 Say Y here if you want to add support for the IPROC touch
365 controller to your system.
369 To compile this driver as a module, choose M here: the
370 module will be called bcm_iproc_tsc.
372 config TOUCHSCREEN_S3C2410
373 tristate "Samsung S3C2410/generic touchscreen input driver"
374 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
377 Say Y here if you have the s3c2410 touchscreen.
381 To compile this driver as a module, choose M here: the
382 module will be called s3c2410_ts.
384 config TOUCHSCREEN_GUNZE
385 tristate "Gunze AHL-51S touchscreen"
388 Say Y here if you have the Gunze AHL-51 touchscreen connected to
393 To compile this driver as a module, choose M here: the
394 module will be called gunze.
396 config TOUCHSCREEN_EKTF2127
397 tristate "Elan eKTF2127 I2C touchscreen"
400 Say Y here if you have an Elan eKTF2127 touchscreen
401 connected to your system.
405 To compile this driver as a module, choose M here: the
406 module will be called ektf2127.
408 config TOUCHSCREEN_ELAN
409 tristate "Elan eKTH I2C touchscreen"
412 Say Y here if you have an Elan eKTH I2C touchscreen
413 connected to your system.
417 To compile this driver as a module, choose M here: the
418 module will be called elants_i2c.
420 config TOUCHSCREEN_ELO
421 tristate "Elo serial touchscreens"
424 Say Y here if you have an Elo serial touchscreen connected to
429 To compile this driver as a module, choose M here: the
430 module will be called elo.
432 config TOUCHSCREEN_WACOM_W8001
433 tristate "Wacom W8001 penabled serial touchscreen"
436 Say Y here if you have an Wacom W8001 penabled serial touchscreen
437 connected to your system.
441 To compile this driver as a module, choose M here: the
442 module will be called wacom_w8001.
444 config TOUCHSCREEN_WACOM_I2C
445 tristate "Wacom Tablet support (I2C)"
448 Say Y here if you want to use the I2C version of the Wacom
453 To compile this driver as a module, choose M here: the module
454 will be called wacom_i2c.
456 config TOUCHSCREEN_LPC32XX
457 tristate "LPC32XX touchscreen controller"
458 depends on ARCH_LPC32XX
460 Say Y here if you have a LPC32XX device and want
461 to support the built-in touchscreen.
463 To compile this driver as a module, choose M here: the
464 module will be called lpc32xx_ts.
466 config TOUCHSCREEN_MAX11801
467 tristate "MAX11801 based touchscreens"
470 Say Y here if you have a MAX11801 based touchscreen
475 To compile this driver as a module, choose M here: the
476 module will be called max11801_ts.
478 config TOUCHSCREEN_MCS5000
479 tristate "MELFAS MCS-5000 touchscreen"
482 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
487 To compile this driver as a module, choose M here: the
488 module will be called mcs5000_ts.
490 config TOUCHSCREEN_MMS114
491 tristate "MELFAS MMS114 touchscreen"
494 Say Y here if you have the MELFAS MMS114 touchscreen controller
499 To compile this driver as a module, choose M here: the
500 module will be called mms114.
502 config TOUCHSCREEN_MELFAS_MIP4
503 tristate "MELFAS MIP4 Touchscreen"
506 Say Y here if you have a MELFAS MIP4 Touchscreen device.
510 To compile this driver as a module, choose M here:
511 the module will be called melfas_mip4.
513 config TOUCHSCREEN_MTOUCH
514 tristate "MicroTouch serial touchscreens"
517 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
522 To compile this driver as a module, choose M here: the
523 module will be called mtouch.
525 config TOUCHSCREEN_IMX6UL_TSC
526 tristate "Freescale i.MX6UL touchscreen controller"
527 depends on (OF && GPIOLIB) || COMPILE_TEST
529 Say Y here if you have a Freescale i.MX6UL, and want to
530 use the internal touchscreen controller.
534 To compile this driver as a module, choose M here: the
535 module will be called imx6ul_tsc.
537 config TOUCHSCREEN_INEXIO
538 tristate "iNexio serial touchscreens"
541 Say Y here if you have an iNexio serial touchscreen connected to
546 To compile this driver as a module, choose M here: the
547 module will be called inexio.
549 config TOUCHSCREEN_MK712
550 tristate "ICS MicroClock MK712 touchscreen"
552 Say Y here if you have the ICS MicroClock MK712 touchscreen
553 controller chip in your system.
557 To compile this driver as a module, choose M here: the
558 module will be called mk712.
560 config TOUCHSCREEN_HP600
561 tristate "HP Jornada 6xx touchscreen"
562 depends on SH_HP6XX && SH_ADC
564 Say Y here if you have a HP Jornada 620/660/680/690 and want to
565 support the built-in touchscreen.
567 To compile this driver as a module, choose M here: the
568 module will be called hp680_ts_input.
570 config TOUCHSCREEN_HP7XX
571 tristate "HP Jornada 7xx touchscreen"
572 depends on SA1100_JORNADA720_SSP
574 Say Y here if you have a HP Jornada 710/720/728 and want
575 to support the built-in touchscreen.
577 To compile this driver as a module, choose M here: the
578 module will be called jornada720_ts.
580 config TOUCHSCREEN_IPAQ_MICRO
581 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
582 depends on MFD_IPAQ_MICRO
584 Say Y here to enable support for the touchscreen attached to
585 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
589 To compile this driver as a module, choose M here: the
590 module will be called ipaq-micro-ts.
592 config TOUCHSCREEN_HTCPEN
593 tristate "HTC Shift X9500 touchscreen"
596 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
597 Clio / Shangrila and want to support the built-in touchscreen.
601 To compile this driver as a module, choose M here: the
602 module will be called htcpen.
604 config TOUCHSCREEN_PENMOUNT
605 tristate "Penmount serial touchscreen"
608 Say Y here if you have a Penmount serial touchscreen connected to
613 To compile this driver as a module, choose M here: the
614 module will be called penmount.
616 config TOUCHSCREEN_EDT_FT5X06
617 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
620 Say Y here if you have an EDT "Polytouch" touchscreen based
621 on the FocalTech FT5x06 family of controllers connected to
626 To compile this driver as a module, choose M here: the
627 module will be called edt-ft5x06.
629 config TOUCHSCREEN_MIGOR
630 tristate "Renesas MIGO-R touchscreen"
631 depends on (SH_MIGOR || COMPILE_TEST) && I2C
633 Say Y here to enable MIGO-R touchscreen support.
637 To compile this driver as a module, choose M here: the
638 module will be called migor_ts.
640 config TOUCHSCREEN_TOUCHRIGHT
641 tristate "Touchright serial touchscreen"
644 Say Y here if you have a Touchright serial touchscreen connected to
649 To compile this driver as a module, choose M here: the
650 module will be called touchright.
652 config TOUCHSCREEN_TOUCHWIN
653 tristate "Touchwin serial touchscreen"
656 Say Y here if you have a Touchwin serial touchscreen connected to
661 To compile this driver as a module, choose M here: the
662 module will be called touchwin.
664 config TOUCHSCREEN_TI_AM335X_TSC
665 tristate "TI Touchscreen Interface"
666 depends on MFD_TI_AM335X_TSCADC
668 Say Y here if you have 4/5/8 wire touchscreen controller
669 to be connected to the ADC controller on your TI AM335x SoC.
673 To compile this driver as a module, choose M here: the
674 module will be called ti_am335x_tsc.
676 config TOUCHSCREEN_UCB1400
677 tristate "Philips UCB1400 touchscreen"
679 depends on UCB1400_CORE
681 This enables support for the Philips UCB1400 touchscreen interface.
682 The UCB1400 is an AC97 audio codec. The touchscreen interface
683 will be initialized only after the ALSA subsystem has been
684 brought up and the UCB1400 detected. You therefore have to
685 configure ALSA support as well (either built-in or modular,
686 independently of whether this driver is itself built-in or
687 modular) for this driver to work.
689 To compile this driver as a module, choose M here: the
690 module will be called ucb1400_ts.
692 config TOUCHSCREEN_PIXCIR
693 tristate "PIXCIR I2C touchscreens"
696 Say Y here if you have a pixcir i2c touchscreen
701 To compile this driver as a module, choose M here: the
702 module will be called pixcir_i2c_ts.
704 config TOUCHSCREEN_WDT87XX_I2C
705 tristate "Weida HiTech I2C touchscreen"
708 Say Y here if you have a Weida WDT87XX I2C touchscreen
709 connected to your system.
713 To compile this driver as a module, choose M here: the
714 module will be called wdt87xx_i2c.
716 config TOUCHSCREEN_WM831X
717 tristate "Support for WM831x touchscreen controllers"
718 depends on MFD_WM831X
720 This enables support for the touchscreen controller on the WM831x
723 To compile this driver as a module, choose M here: the
724 module will be called wm831x-ts.
726 config TOUCHSCREEN_WM97XX
727 tristate "Support for WM97xx AC97 touchscreen controllers"
730 Say Y here if you have a Wolfson Microelectronics WM97xx
731 touchscreen connected to your system. Note that this option
732 only enables core driver, you will also need to select
733 support for appropriate chip below.
737 To compile this driver as a module, choose M here: the
738 module will be called wm97xx-ts.
740 config TOUCHSCREEN_WM9705
741 bool "WM9705 Touchscreen interface support"
742 depends on TOUCHSCREEN_WM97XX
745 Say Y here to enable support for the Wolfson Microelectronics
746 WM9705 touchscreen controller.
748 config TOUCHSCREEN_WM9712
749 bool "WM9712 Touchscreen interface support"
750 depends on TOUCHSCREEN_WM97XX
753 Say Y here to enable support for the Wolfson Microelectronics
754 WM9712 touchscreen controller.
756 config TOUCHSCREEN_WM9713
757 bool "WM9713 Touchscreen interface support"
758 depends on TOUCHSCREEN_WM97XX
761 Say Y here to enable support for the Wolfson Microelectronics
762 WM9713 touchscreen controller.
764 config TOUCHSCREEN_WM97XX_ATMEL
765 tristate "WM97xx Atmel accelerated touch"
766 depends on TOUCHSCREEN_WM97XX && AVR32
768 Say Y here for support for streaming mode with WM97xx touchscreens
769 on Atmel AT91 or AVR32 systems with an AC97C module.
771 Be aware that this will use channel B in the controller for
772 streaming data, this must not conflict with other AC97C drivers.
776 To compile this driver as a module, choose M here: the module will
777 be called atmel-wm97xx.
779 config TOUCHSCREEN_WM97XX_MAINSTONE
780 tristate "WM97xx Mainstone/Palm accelerated touch"
781 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
783 Say Y here for support for streaming mode with WM97xx touchscreens
784 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
788 To compile this driver as a module, choose M here: the
789 module will be called mainstone-wm97xx.
791 config TOUCHSCREEN_WM97XX_ZYLONITE
792 tristate "Zylonite accelerated touch"
793 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
794 select TOUCHSCREEN_WM9713
796 Say Y here for support for streaming mode with the touchscreen
801 To compile this driver as a module, choose M here: the
802 module will be called zylonite-wm97xx.
804 config TOUCHSCREEN_USB_COMPOSITE
805 tristate "USB Touchscreen Driver"
806 depends on USB_ARCH_HAS_HCD
809 USB Touchscreen driver for:
810 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
811 - PanJit TouchSet USB
812 - 3M MicroTouch USB (EX II series)
814 - some other eTurboTouch
817 - IRTOUCHSYSTEMS/UNITOP
819 - GoTop Super_Q2/GogoPen/PenPower tablets
820 - JASTEC USB Touch Controller/DigiTech DTR-02U
821 - Zytronic controllers
822 - Elo TouchSystems 2700 IntelliTouch
823 - EasyTouch USB Touch Controller from Data Modul
824 - e2i (Mimo monitors)
826 Have a look at <http://linux.chapter7.ch/touchkit/> for
827 a usage description and the required user-space stuff.
829 To compile this driver as a module, choose M here: the
830 module will be called usbtouchscreen.
832 config TOUCHSCREEN_MX25
833 tristate "Freescale i.MX25 touchscreen input driver"
834 depends on MFD_MX25_TSADC
836 Enable support for touchscreen connected to your i.MX25.
838 To compile this driver as a module, choose M here: the
839 module will be called fsl-imx25-tcq.
841 config TOUCHSCREEN_MC13783
842 tristate "Freescale MC13783 touchscreen input driver"
843 depends on MFD_MC13XXX
845 Say Y here if you have an Freescale MC13783 PMIC on your
846 board and want to use its touchscreen
850 To compile this driver as a module, choose M here: the
851 module will be called mc13783_ts.
853 config TOUCHSCREEN_USB_EGALAX
855 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
856 depends on TOUCHSCREEN_USB_COMPOSITE
858 config TOUCHSCREEN_USB_PANJIT
860 bool "PanJit device support" if EXPERT
861 depends on TOUCHSCREEN_USB_COMPOSITE
863 config TOUCHSCREEN_USB_3M
865 bool "3M/Microtouch EX II series device support" if EXPERT
866 depends on TOUCHSCREEN_USB_COMPOSITE
868 config TOUCHSCREEN_USB_ITM
870 bool "ITM device support" if EXPERT
871 depends on TOUCHSCREEN_USB_COMPOSITE
873 config TOUCHSCREEN_USB_ETURBO
875 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
876 depends on TOUCHSCREEN_USB_COMPOSITE
878 config TOUCHSCREEN_USB_GUNZE
880 bool "Gunze AHL61 device support" if EXPERT
881 depends on TOUCHSCREEN_USB_COMPOSITE
883 config TOUCHSCREEN_USB_DMC_TSC10
885 bool "DMC TSC-10/25 device support" if EXPERT
886 depends on TOUCHSCREEN_USB_COMPOSITE
888 config TOUCHSCREEN_USB_IRTOUCH
890 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
891 depends on TOUCHSCREEN_USB_COMPOSITE
893 config TOUCHSCREEN_USB_IDEALTEK
895 bool "IdealTEK URTC1000 device support" if EXPERT
896 depends on TOUCHSCREEN_USB_COMPOSITE
898 config TOUCHSCREEN_USB_GENERAL_TOUCH
900 bool "GeneralTouch Touchscreen device support" if EXPERT
901 depends on TOUCHSCREEN_USB_COMPOSITE
903 config TOUCHSCREEN_USB_GOTOP
905 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
906 depends on TOUCHSCREEN_USB_COMPOSITE
908 config TOUCHSCREEN_USB_JASTEC
910 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
911 depends on TOUCHSCREEN_USB_COMPOSITE
913 config TOUCHSCREEN_USB_ELO
915 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
916 depends on TOUCHSCREEN_USB_COMPOSITE
918 config TOUCHSCREEN_USB_E2I
920 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
921 depends on TOUCHSCREEN_USB_COMPOSITE
923 config TOUCHSCREEN_USB_ZYTRONIC
925 bool "Zytronic controller" if EXPERT
926 depends on TOUCHSCREEN_USB_COMPOSITE
928 config TOUCHSCREEN_USB_ETT_TC45USB
930 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
931 depends on TOUCHSCREEN_USB_COMPOSITE
933 config TOUCHSCREEN_USB_NEXIO
935 bool "NEXIO/iNexio device support" if EXPERT
936 depends on TOUCHSCREEN_USB_COMPOSITE
938 config TOUCHSCREEN_USB_EASYTOUCH
940 bool "EasyTouch USB Touch controller device support" if EMBEDDED
941 depends on TOUCHSCREEN_USB_COMPOSITE
943 Say Y here if you have an EasyTouch USB Touch controller.
946 config TOUCHSCREEN_TOUCHIT213
947 tristate "Sahara TouchIT-213 touchscreen"
950 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
954 To compile this driver as a module, choose M here: the
955 module will be called touchit213.
957 config TOUCHSCREEN_TS4800
958 tristate "TS-4800 touchscreen"
959 depends on HAS_IOMEM && OF
960 depends on SOC_IMX51 || COMPILE_TEST
964 Say Y here if you have a touchscreen on a TS-4800 board.
966 On TS-4800, the touchscreen is not handled directly by Linux but by
971 To compile this driver as a module, choose M here: the
972 module will be called ts4800_ts.
974 config TOUCHSCREEN_TSC_SERIO
975 tristate "TSC-10/25/40 serial touchscreen support"
978 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
983 To compile this driver as a module, choose M here: the
984 module will be called tsc40.
986 config TOUCHSCREEN_TSC200X_CORE
989 config TOUCHSCREEN_TSC2004
990 tristate "TSC2004 based touchscreens"
993 select TOUCHSCREEN_TSC200X_CORE
995 Say Y here if you have a TSC2004 based touchscreen.
999 To compile this driver as a module, choose M here: the
1000 module will be called tsc2004.
1002 config TOUCHSCREEN_TSC2005
1003 tristate "TSC2005 based touchscreens"
1004 depends on SPI_MASTER
1006 select TOUCHSCREEN_TSC200X_CORE
1008 Say Y here if you have a TSC2005 based touchscreen.
1012 To compile this driver as a module, choose M here: the
1013 module will be called tsc2005.
1015 config TOUCHSCREEN_TSC2007
1016 tristate "TSC2007 based touchscreens"
1019 Say Y here if you have a TSC2007 based touchscreen.
1023 To compile this driver as a module, choose M here: the
1024 module will be called tsc2007.
1026 config TOUCHSCREEN_W90X900
1027 tristate "W90P910 touchscreen driver"
1028 depends on ARCH_W90X900
1030 Say Y here if you have a W90P910 based touchscreen.
1032 To compile this driver as a module, choose M here: the
1033 module will be called w90p910_ts.
1035 config TOUCHSCREEN_PCAP
1036 tristate "Motorola PCAP touchscreen"
1039 Say Y here if you have a Motorola EZX telephone and
1040 want to enable support for the built-in touchscreen.
1042 To compile this driver as a module, choose M here: the
1043 module will be called pcap_ts.
1045 config TOUCHSCREEN_RM_TS
1046 tristate "Raydium I2C Touchscreen"
1048 depends on GPIOLIB || COMPILE_TEST
1050 Say Y here if you have Raydium series I2C touchscreen,
1051 such as RM32380, connected to your system.
1055 To compile this driver as a module, choose M here: the
1056 module will be called raydium_i2c_ts.
1058 config TOUCHSCREEN_SILEAD
1059 tristate "Silead I2C touchscreen"
1062 Say Y here if you have the Silead touchscreen connected to
1067 To compile this driver as a module, choose M here: the
1068 module will be called silead.
1070 config TOUCHSCREEN_SIS_I2C
1071 tristate "SiS 9200 family I2C touchscreen"
1074 depends on GPIOLIB || COMPILE_TEST
1076 This enables support for SiS 9200 family over I2C based touchscreens.
1080 To compile this driver as a module, choose M here: the
1081 module will be called sis_i2c.
1083 config TOUCHSCREEN_ST1232
1084 tristate "Sitronix ST1232 touchscreen controllers"
1087 Say Y here if you want to support Sitronix ST1232
1088 touchscreen controller.
1092 To compile this driver as a module, choose M here: the
1093 module will be called st1232_ts.
1095 config TOUCHSCREEN_STMPE
1096 tristate "STMicroelectronics STMPE touchscreens"
1097 depends on MFD_STMPE
1098 depends on (OF || COMPILE_TEST)
1100 Say Y here if you want support for STMicroelectronics
1101 STMPE touchscreen controllers.
1103 To compile this driver as a module, choose M here: the
1104 module will be called stmpe-ts.
1106 config TOUCHSCREEN_SUN4I
1107 tristate "Allwinner sun4i resistive touchscreen controller support"
1108 depends on ARCH_SUNXI || COMPILE_TEST
1110 depends on THERMAL || !THERMAL_OF
1112 This selects support for the resistive touchscreen controller
1113 found on Allwinner sunxi SoCs.
1115 To compile this driver as a module, choose M here: the
1116 module will be called sun4i-ts.
1118 config TOUCHSCREEN_SUR40
1119 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1120 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1121 depends on VIDEO_V4L2
1122 select INPUT_POLLDEV
1123 select VIDEOBUF2_DMA_SG
1125 Say Y here if you want support for the Samsung SUR40 touchscreen
1126 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1128 To compile this driver as a module, choose M here: the
1129 module will be called sur40.
1131 config TOUCHSCREEN_SURFACE3_SPI
1132 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1134 depends on GPIOLIB || COMPILE_TEST
1136 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1137 controller chip as found on the Surface 3 in your system.
1141 To compile this driver as a module, choose M here: the
1142 module will be called surface3_spi.
1144 config TOUCHSCREEN_SX8654
1145 tristate "Semtech SX8654 touchscreen"
1148 Say Y here if you have a Semtech SX8654 touchscreen controller.
1152 To compile this driver as a module, choose M here: the
1153 module will be called sx8654.
1155 config TOUCHSCREEN_TPS6507X
1156 tristate "TPS6507x based touchscreens"
1158 select INPUT_POLLDEV
1160 Say Y here if you have a TPS6507x based touchscreen
1165 To compile this driver as a module, choose M here: the
1166 module will be called tps6507x_ts.
1168 config TOUCHSCREEN_ZET6223
1169 tristate "Zeitec ZET6223 touchscreen driver"
1172 Say Y here if you have a touchscreen using Zeitec ZET6223
1176 To compile this driver as a module, choose M here: the
1177 module will be called zet6223.
1179 config TOUCHSCREEN_ZFORCE
1180 tristate "Neonode zForce infrared touchscreens"
1182 depends on GPIOLIB || COMPILE_TEST
1184 Say Y here if you have a touchscreen using the zforce
1185 infraread technology from Neonode.
1189 To compile this driver as a module, choose M here: the
1190 module will be called zforce_ts.
1192 config TOUCHSCREEN_COLIBRI_VF50
1193 tristate "Toradex Colibri on board touchscreen driver"
1194 depends on IIO && VF610_ADC
1195 depends on GPIOLIB || COMPILE_TEST
1197 Say Y here if you have a Colibri VF50 and plan to use
1198 the on-board provided 4-wire touchscreen driver.
1202 To compile this driver as a module, choose M here: the
1203 module will be called colibri_vf50_ts.
1205 config TOUCHSCREEN_ROHM_BU21023
1206 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1209 Say Y here if you have a touchscreen using ROHM BU21023/24.
1213 To compile this driver as a module, choose M here: the
1214 module will be called bu21023_ts.