2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_88PM860X
15 tristate "Marvell 88PM860x touchscreen"
16 depends on MFD_88PM860X
18 Say Y here if you have a 88PM860x PMIC and want to enable
19 support for the built-in touchscreen.
23 To compile this driver as a module, choose M here: the
24 module will be called 88pm860x-ts.
26 config TOUCHSCREEN_ADS7846
27 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29 depends on HWMON = n || HWMON
31 Say Y here if you have a touchscreen interface using the
32 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
33 and your board-specific setup code includes that in its
36 If HWMON is selected, and the driver is told the reference voltage
37 on your board, you will also get hwmon interfaces for the voltage
38 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40 If unsure, say N (but it's safe to say "Y").
42 To compile this driver as a module, choose M here: the
43 module will be called ads7846.
45 config TOUCHSCREEN_AD7877
46 tristate "AD7877 based touchscreens"
49 Say Y here if you have a touchscreen interface using the
50 AD7877 controller, and your board-specific initialization
51 code includes that in its table of SPI devices.
53 If unsure, say N (but it's safe to say "Y").
55 To compile this driver as a module, choose M here: the
56 module will be called ad7877.
58 config TOUCHSCREEN_AD7879
59 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61 Say Y here if you want to support a touchscreen interface using
62 the AD7879-1/AD7889-1 controller.
64 You should select a bus connection too.
66 To compile this driver as a module, choose M here: the
67 module will be called ad7879.
69 config TOUCHSCREEN_AD7879_I2C
70 tristate "support I2C bus connection"
71 depends on TOUCHSCREEN_AD7879 && I2C
73 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
75 To compile this driver as a module, choose M here: the
76 module will be called ad7879-i2c.
78 config TOUCHSCREEN_AD7879_SPI
79 tristate "support SPI bus connection"
80 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
82 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
84 If unsure, say N (but it's safe to say "Y").
86 To compile this driver as a module, choose M here: the
87 module will be called ad7879-spi.
89 config TOUCHSCREEN_ATMEL_MXT
90 tristate "Atmel mXT I2C Touchscreen"
93 Say Y here if you have Atmel mXT series I2C touchscreen,
94 such as AT42QT602240/ATMXT224, connected to your system.
98 To compile this driver as a module, choose M here: the
99 module will be called atmel_mxt_ts.
101 config TOUCHSCREEN_AUO_PIXCIR
102 tristate "AUO in-cell touchscreen using Pixcir ICs"
106 Say Y here if you have a AUO display with in-cell touchscreen
111 To compile this driver as a module, choose M here: the
112 module will be called auo-pixcir-ts.
114 config TOUCHSCREEN_BITSY
115 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
116 depends on SA1100_BITSY
119 Say Y here if you have the h3600 (Bitsy) touchscreen.
123 To compile this driver as a module, choose M here: the
124 module will be called h3600_ts_input.
126 config TOUCHSCREEN_BU21013
127 tristate "BU21013 based touch panel controllers"
130 Say Y here if you have a bu21013 touchscreen connected to
135 To compile this driver as a module, choose M here: the
136 module will be called bu21013_ts.
138 config TOUCHSCREEN_CY8CTMG110
139 tristate "cy8ctmg110 touchscreen"
143 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
148 To compile this driver as a module, choose M here: the
149 module will be called cy8ctmg110_ts.
151 config TOUCHSCREEN_CYTTSP_CORE
152 tristate "Cypress TTSP touchscreen"
154 Say Y here if you have a touchscreen using controller from
155 the Cypress TrueTouch(tm) Standard Product family connected
156 to your system. You will also need to select appropriate
157 bus connection below.
161 To compile this driver as a module, choose M here: the
162 module will be called cyttsp_core.
164 config TOUCHSCREEN_CYTTSP_I2C
165 tristate "support I2C bus connection"
166 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
168 Say Y here if the touchscreen is connected via I2C bus.
170 To compile this driver as a module, choose M here: the
171 module will be called cyttsp_i2c.
173 config TOUCHSCREEN_CYTTSP_SPI
174 tristate "support SPI bus connection"
175 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
177 Say Y here if the touchscreen is connected via SPI bus.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_spi.
182 config TOUCHSCREEN_DA9034
183 tristate "Touchscreen support for Dialog Semiconductor DA9034"
184 depends on PMIC_DA903X
187 Say Y here to enable the support for the touchscreen found
188 on Dialog Semiconductor DA9034 PMIC.
192 To compile this driver as a module, choose M here: the
193 module will be called da9034-ts.
195 config TOUCHSCREEN_DA9052
196 tristate "Dialog DA9052/DA9053 TSI"
197 depends on PMIC_DA9052
199 Say Y here to support the touchscreen found on Dialog Semiconductor
200 DA9052-BC and DA9053-AA/Bx PMICs.
204 To compile this driver as a module, choose M here: the
205 module will be called da9052_tsi.
207 config TOUCHSCREEN_DYNAPRO
208 tristate "Dynapro serial touchscreen"
211 Say Y here if you have a Dynapro serial touchscreen connected to
216 To compile this driver as a module, choose M here: the
217 module will be called dynapro.
219 config TOUCHSCREEN_HAMPSHIRE
220 tristate "Hampshire serial touchscreen"
223 Say Y here if you have a Hampshire serial touchscreen connected to
228 To compile this driver as a module, choose M here: the
229 module will be called hampshire.
231 config TOUCHSCREEN_EETI
232 tristate "EETI touchscreen panel support"
235 Say Y here to enable support for I2C connected EETI touch panels.
237 To compile this driver as a module, choose M here: the
238 module will be called eeti_ts.
240 config TOUCHSCREEN_EGALAX
241 tristate "EETI eGalax multi-touch panel support"
244 Say Y here to enable support for I2C connected EETI
245 eGalax multi-touch panels.
247 To compile this driver as a module, choose M here: the
248 module will be called egalax_ts.
250 config TOUCHSCREEN_FUJITSU
251 tristate "Fujitsu serial touchscreen"
254 Say Y here if you have the Fujitsu touchscreen (such as one
255 installed in Lifebook P series laptop) connected to your
260 To compile this driver as a module, choose M here: the
261 module will be called fujitsu-ts.
263 config TOUCHSCREEN_ILI210X
264 tristate "Ilitek ILI210X based touchscreen"
267 Say Y here if you have a ILI210X based touchscreen
268 controller. This driver supports models ILI2102,
269 ILI2102s, ILI2103, ILI2103s and ILI2105.
270 Such kind of chipsets can be found in Amazon Kindle Fire
275 To compile this driver as a module, choose M here: the
276 module will be called ili210x.
278 config TOUCHSCREEN_S3C2410
279 tristate "Samsung S3C2410/generic touchscreen input driver"
280 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
283 Say Y here if you have the s3c2410 touchscreen.
287 To compile this driver as a module, choose M here: the
288 module will be called s3c2410_ts.
290 config TOUCHSCREEN_GUNZE
291 tristate "Gunze AHL-51S touchscreen"
294 Say Y here if you have the Gunze AHL-51 touchscreen connected to
299 To compile this driver as a module, choose M here: the
300 module will be called gunze.
302 config TOUCHSCREEN_ELO
303 tristate "Elo serial touchscreens"
306 Say Y here if you have an Elo serial touchscreen connected to
311 To compile this driver as a module, choose M here: the
312 module will be called elo.
314 config TOUCHSCREEN_WACOM_W8001
315 tristate "Wacom W8001 penabled serial touchscreen"
318 Say Y here if you have an Wacom W8001 penabled serial touchscreen
319 connected to your system.
323 To compile this driver as a module, choose M here: the
324 module will be called wacom_w8001.
326 config TOUCHSCREEN_WACOM_I2C
327 tristate "Wacom Tablet support (I2C)"
330 Say Y here if you want to use the I2C version of the Wacom
335 To compile this driver as a module, choose M here: the module
336 will be called wacom_i2c.
338 config TOUCHSCREEN_LPC32XX
339 tristate "LPC32XX touchscreen controller"
340 depends on ARCH_LPC32XX
342 Say Y here if you have a LPC32XX device and want
343 to support the built-in touchscreen.
345 To compile this driver as a module, choose M here: the
346 module will be called lpc32xx_ts.
348 config TOUCHSCREEN_MAX11801
349 tristate "MAX11801 based touchscreens"
352 Say Y here if you have a MAX11801 based touchscreen
357 To compile this driver as a module, choose M here: the
358 module will be called max11801_ts.
360 config TOUCHSCREEN_MCS5000
361 tristate "MELFAS MCS-5000 touchscreen"
364 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
369 To compile this driver as a module, choose M here: the
370 module will be called mcs5000_ts.
372 config TOUCHSCREEN_MTOUCH
373 tristate "MicroTouch serial touchscreens"
376 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
381 To compile this driver as a module, choose M here: the
382 module will be called mtouch.
384 config TOUCHSCREEN_INEXIO
385 tristate "iNexio serial touchscreens"
388 Say Y here if you have an iNexio serial touchscreen connected to
393 To compile this driver as a module, choose M here: the
394 module will be called inexio.
396 config TOUCHSCREEN_INTEL_MID
397 tristate "Intel MID platform resistive touchscreen"
398 depends on INTEL_SCU_IPC
400 Say Y here if you have a Intel MID based touchscreen in
405 To compile this driver as a module, choose M here: the
406 module will be called intel_mid_touch.
408 config TOUCHSCREEN_MK712
409 tristate "ICS MicroClock MK712 touchscreen"
411 Say Y here if you have the ICS MicroClock MK712 touchscreen
412 controller chip in your system.
416 To compile this driver as a module, choose M here: the
417 module will be called mk712.
419 config TOUCHSCREEN_HP600
420 tristate "HP Jornada 6xx touchscreen"
421 depends on SH_HP6XX && SH_ADC
423 Say Y here if you have a HP Jornada 620/660/680/690 and want to
424 support the built-in touchscreen.
426 To compile this driver as a module, choose M here: the
427 module will be called hp680_ts_input.
429 config TOUCHSCREEN_HP7XX
430 tristate "HP Jornada 7xx touchscreen"
431 depends on SA1100_JORNADA720_SSP
433 Say Y here if you have a HP Jornada 710/720/728 and want
434 to support the built-in touchscreen.
436 To compile this driver as a module, choose M here: the
437 module will be called jornada720_ts.
439 config TOUCHSCREEN_HTCPEN
440 tristate "HTC Shift X9500 touchscreen"
443 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
444 Clio / Shangrila and want to support the built-in touchscreen.
448 To compile this driver as a module, choose M here: the
449 module will be called htcpen.
451 config TOUCHSCREEN_PENMOUNT
452 tristate "Penmount serial touchscreen"
455 Say Y here if you have a Penmount serial touchscreen connected to
460 To compile this driver as a module, choose M here: the
461 module will be called penmount.
463 config TOUCHSCREEN_MIGOR
464 tristate "Renesas MIGO-R touchscreen"
465 depends on SH_MIGOR && I2C
467 Say Y here to enable MIGO-R touchscreen support.
471 To compile this driver as a module, choose M here: the
472 module will be called migor_ts.
474 config TOUCHSCREEN_TNETV107X
475 tristate "TI TNETV107X touchscreen support"
476 depends on ARCH_DAVINCI_TNETV107X
478 Say Y here if you want to use the TNETV107X touchscreen.
480 To compile this driver as a module, choose M here: the
481 module will be called tnetv107x-ts.
483 config TOUCHSCREEN_TOUCHRIGHT
484 tristate "Touchright serial touchscreen"
487 Say Y here if you have a Touchright serial touchscreen connected to
492 To compile this driver as a module, choose M here: the
493 module will be called touchright.
495 config TOUCHSCREEN_TOUCHWIN
496 tristate "Touchwin serial touchscreen"
499 Say Y here if you have a Touchwin serial touchscreen connected to
504 To compile this driver as a module, choose M here: the
505 module will be called touchwin.
507 config TOUCHSCREEN_TI_TSCADC
508 tristate "TI Touchscreen Interface"
509 depends on ARCH_OMAP2PLUS
511 Say Y here if you have 4/5/8 wire touchscreen controller
512 to be connected to the ADC controller on your TI AM335x SoC.
516 To compile this driver as a module, choose M here: the
517 module will be called ti_tscadc.
519 config TOUCHSCREEN_ATMEL_TSADCC
520 tristate "Atmel Touchscreen Interface"
523 Say Y here if you have a 4-wire touchscreen connected to the
524 ADC Controller on your Atmel SoC.
528 To compile this driver as a module, choose M here: the
529 module will be called atmel_tsadcc.
531 config TOUCHSCREEN_UCB1400
532 tristate "Philips UCB1400 touchscreen"
534 depends on UCB1400_CORE
536 This enables support for the Philips UCB1400 touchscreen interface.
537 The UCB1400 is an AC97 audio codec. The touchscreen interface
538 will be initialized only after the ALSA subsystem has been
539 brought up and the UCB1400 detected. You therefore have to
540 configure ALSA support as well (either built-in or modular,
541 independently of whether this driver is itself built-in or
542 modular) for this driver to work.
544 To compile this driver as a module, choose M here: the
545 module will be called ucb1400_ts.
547 config TOUCHSCREEN_PIXCIR
548 tristate "PIXCIR I2C touchscreens"
551 Say Y here if you have a pixcir i2c touchscreen
556 To compile this driver as a module, choose M here: the
557 module will be called pixcir_i2c_ts.
559 config TOUCHSCREEN_WM831X
560 tristate "Support for WM831x touchscreen controllers"
561 depends on MFD_WM831X
563 This enables support for the touchscreen controller on the WM831x
566 To compile this driver as a module, choose M here: the
567 module will be called wm831x-ts.
569 config TOUCHSCREEN_WM97XX
570 tristate "Support for WM97xx AC97 touchscreen controllers"
573 Say Y here if you have a Wolfson Microelectronics WM97xx
574 touchscreen connected to your system. Note that this option
575 only enables core driver, you will also need to select
576 support for appropriate chip below.
580 To compile this driver as a module, choose M here: the
581 module will be called wm97xx-ts.
583 config TOUCHSCREEN_WM9705
584 bool "WM9705 Touchscreen interface support"
585 depends on TOUCHSCREEN_WM97XX
588 Say Y here to enable support for the Wolfson Microelectronics
589 WM9705 touchscreen controller.
591 config TOUCHSCREEN_WM9712
592 bool "WM9712 Touchscreen interface support"
593 depends on TOUCHSCREEN_WM97XX
596 Say Y here to enable support for the Wolfson Microelectronics
597 WM9712 touchscreen controller.
599 config TOUCHSCREEN_WM9713
600 bool "WM9713 Touchscreen interface support"
601 depends on TOUCHSCREEN_WM97XX
604 Say Y here to enable support for the Wolfson Microelectronics
605 WM9713 touchscreen controller.
607 config TOUCHSCREEN_WM97XX_ATMEL
608 tristate "WM97xx Atmel accelerated touch"
609 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
611 Say Y here for support for streaming mode with WM97xx touchscreens
612 on Atmel AT91 or AVR32 systems with an AC97C module.
614 Be aware that this will use channel B in the controller for
615 streaming data, this must not conflict with other AC97C drivers.
619 To compile this driver as a module, choose M here: the module will
620 be called atmel-wm97xx.
622 config TOUCHSCREEN_WM97XX_MAINSTONE
623 tristate "WM97xx Mainstone/Palm accelerated touch"
624 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
626 Say Y here for support for streaming mode with WM97xx touchscreens
627 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
631 To compile this driver as a module, choose M here: the
632 module will be called mainstone-wm97xx.
634 config TOUCHSCREEN_WM97XX_ZYLONITE
635 tristate "Zylonite accelerated touch"
636 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
637 select TOUCHSCREEN_WM9713
639 Say Y here for support for streaming mode with the touchscreen
644 To compile this driver as a module, choose M here: the
645 module will be called zylonite-wm97xx.
647 config TOUCHSCREEN_USB_COMPOSITE
648 tristate "USB Touchscreen Driver"
649 depends on USB_ARCH_HAS_HCD
652 USB Touchscreen driver for:
653 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
654 - PanJit TouchSet USB
655 - 3M MicroTouch USB (EX II series)
657 - some other eTurboTouch
660 - IRTOUCHSYSTEMS/UNITOP
662 - GoTop Super_Q2/GogoPen/PenPower tablets
663 - JASTEC USB Touch Controller/DigiTech DTR-02U
664 - Zytronic controllers
665 - Elo TouchSystems 2700 IntelliTouch
666 - EasyTouch USB Touch Controller from Data Modul
667 - e2i (Mimo monitors)
669 Have a look at <http://linux.chapter7.ch/touchkit/> for
670 a usage description and the required user-space stuff.
672 To compile this driver as a module, choose M here: the
673 module will be called usbtouchscreen.
675 config TOUCHSCREEN_MC13783
676 tristate "Freescale MC13783 touchscreen input driver"
677 depends on MFD_MC13783
679 Say Y here if you have an Freescale MC13783 PMIC on your
680 board and want to use its touchscreen
684 To compile this driver as a module, choose M here: the
685 module will be called mc13783_ts.
687 config TOUCHSCREEN_USB_EGALAX
689 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
690 depends on TOUCHSCREEN_USB_COMPOSITE
692 config TOUCHSCREEN_USB_PANJIT
694 bool "PanJit device support" if EXPERT
695 depends on TOUCHSCREEN_USB_COMPOSITE
697 config TOUCHSCREEN_USB_3M
699 bool "3M/Microtouch EX II series device support" if EXPERT
700 depends on TOUCHSCREEN_USB_COMPOSITE
702 config TOUCHSCREEN_USB_ITM
704 bool "ITM device support" if EXPERT
705 depends on TOUCHSCREEN_USB_COMPOSITE
707 config TOUCHSCREEN_USB_ETURBO
709 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
710 depends on TOUCHSCREEN_USB_COMPOSITE
712 config TOUCHSCREEN_USB_GUNZE
714 bool "Gunze AHL61 device support" if EXPERT
715 depends on TOUCHSCREEN_USB_COMPOSITE
717 config TOUCHSCREEN_USB_DMC_TSC10
719 bool "DMC TSC-10/25 device support" if EXPERT
720 depends on TOUCHSCREEN_USB_COMPOSITE
722 config TOUCHSCREEN_USB_IRTOUCH
724 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
725 depends on TOUCHSCREEN_USB_COMPOSITE
727 config TOUCHSCREEN_USB_IDEALTEK
729 bool "IdealTEK URTC1000 device support" if EXPERT
730 depends on TOUCHSCREEN_USB_COMPOSITE
732 config TOUCHSCREEN_USB_GENERAL_TOUCH
734 bool "GeneralTouch Touchscreen device support" if EXPERT
735 depends on TOUCHSCREEN_USB_COMPOSITE
737 config TOUCHSCREEN_USB_GOTOP
739 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
740 depends on TOUCHSCREEN_USB_COMPOSITE
742 config TOUCHSCREEN_USB_JASTEC
744 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
745 depends on TOUCHSCREEN_USB_COMPOSITE
747 config TOUCHSCREEN_USB_ELO
749 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
750 depends on TOUCHSCREEN_USB_COMPOSITE
752 config TOUCHSCREEN_USB_E2I
754 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
755 depends on TOUCHSCREEN_USB_COMPOSITE
757 config TOUCHSCREEN_USB_ZYTRONIC
759 bool "Zytronic controller" if EXPERT
760 depends on TOUCHSCREEN_USB_COMPOSITE
762 config TOUCHSCREEN_USB_ETT_TC45USB
764 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
765 depends on TOUCHSCREEN_USB_COMPOSITE
767 config TOUCHSCREEN_USB_NEXIO
769 bool "NEXIO/iNexio device support" if EXPERT
770 depends on TOUCHSCREEN_USB_COMPOSITE
772 config TOUCHSCREEN_USB_EASYTOUCH
774 bool "EasyTouch USB Touch controller device support" if EMBEDDED
775 depends on TOUCHSCREEN_USB_COMPOSITE
777 Say Y here if you have an EasyTouch USB Touch controller.
780 config TOUCHSCREEN_TOUCHIT213
781 tristate "Sahara TouchIT-213 touchscreen"
784 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
788 To compile this driver as a module, choose M here: the
789 module will be called touchit213.
791 config TOUCHSCREEN_TSC_SERIO
792 tristate "TSC-10/25/40 serial touchscreen support"
795 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
800 To compile this driver as a module, choose M here: the
801 module will be called tsc40.
803 config TOUCHSCREEN_TSC2005
804 tristate "TSC2005 based touchscreens"
805 depends on SPI_MASTER && GENERIC_HARDIRQS
807 Say Y here if you have a TSC2005 based touchscreen.
811 To compile this driver as a module, choose M here: the
812 module will be called tsc2005.
814 config TOUCHSCREEN_TSC2007
815 tristate "TSC2007 based touchscreens"
818 Say Y here if you have a TSC2007 based touchscreen.
822 To compile this driver as a module, choose M here: the
823 module will be called tsc2007.
825 config TOUCHSCREEN_W90X900
826 tristate "W90P910 touchscreen driver"
829 Say Y here if you have a W90P910 based touchscreen.
831 To compile this driver as a module, choose M here: the
832 module will be called w90p910_ts.
834 config TOUCHSCREEN_PCAP
835 tristate "Motorola PCAP touchscreen"
838 Say Y here if you have a Motorola EZX telephone and
839 want to enable support for the built-in touchscreen.
841 To compile this driver as a module, choose M here: the
842 module will be called pcap_ts.
844 config TOUCHSCREEN_ST1232
845 tristate "Sitronix ST1232 touchscreen controllers"
848 Say Y here if you want to support Sitronix ST1232
849 touchscreen controller.
853 To compile this driver as a module, choose M here: the
854 module will be called st1232_ts.
856 config TOUCHSCREEN_STMPE
857 tristate "STMicroelectronics STMPE touchscreens"
860 Say Y here if you want support for STMicroelectronics
861 STMPE touchscreen controllers.
863 To compile this driver as a module, choose M here: the
864 module will be called stmpe-ts.
866 config TOUCHSCREEN_TPS6507X
867 tristate "TPS6507x based touchscreens"
870 Say Y here if you have a TPS6507x based touchscreen
875 To compile this driver as a module, choose M here: the
876 module will be called tps6507x_ts.