Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
[platform/kernel/linux-rpi.git] / drivers / iio / humidity / hid-sensor-humidity.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HID Sensors Driver
4  * Copyright (c) 2017, Intel Corporation.
5  */
6 #include <linux/device.h>
7 #include <linux/hid-sensor-hub.h>
8 #include <linux/iio/buffer.h>
9 #include <linux/iio/iio.h>
10 #include <linux/module.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/platform_device.h>
13
14 #include "hid-sensor-trigger.h"
15
16 struct hid_humidity_state {
17         struct hid_sensor_common common_attributes;
18         struct hid_sensor_hub_attribute_info humidity_attr;
19         struct {
20                 s32 humidity_data;
21                 u64 timestamp __aligned(8);
22         } scan;
23         int scale_pre_decml;
24         int scale_post_decml;
25         int scale_precision;
26         int value_offset;
27 };
28
29 static const u32 humidity_sensitivity_addresses[] = {
30         HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
31 };
32
33 /* Channel definitions */
34 static const struct iio_chan_spec humidity_channels[] = {
35         {
36                 .type = IIO_HUMIDITYRELATIVE,
37                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
38                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
39                         BIT(IIO_CHAN_INFO_SCALE) |
40                         BIT(IIO_CHAN_INFO_SAMP_FREQ) |
41                         BIT(IIO_CHAN_INFO_HYSTERESIS),
42         },
43         IIO_CHAN_SOFT_TIMESTAMP(1)
44 };
45
46 /* Adjust channel real bits based on report descriptor */
47 static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
48                                         int channel, int size)
49 {
50         channels[channel].scan_type.sign = 's';
51         /* Real storage bits will change based on the report desc. */
52         channels[channel].scan_type.realbits = size * 8;
53         /* Maximum size of a sample to capture is s32 */
54         channels[channel].scan_type.storagebits = sizeof(s32) * 8;
55 }
56
57 static int humidity_read_raw(struct iio_dev *indio_dev,
58                                 struct iio_chan_spec const *chan,
59                                 int *val, int *val2, long mask)
60 {
61         struct hid_humidity_state *humid_st = iio_priv(indio_dev);
62
63         switch (mask) {
64         case IIO_CHAN_INFO_RAW:
65                 if (chan->type != IIO_HUMIDITYRELATIVE)
66                         return -EINVAL;
67                 hid_sensor_power_state(&humid_st->common_attributes, true);
68                 *val = sensor_hub_input_attr_get_raw_value(
69                                 humid_st->common_attributes.hsdev,
70                                 HID_USAGE_SENSOR_HUMIDITY,
71                                 HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
72                                 humid_st->humidity_attr.report_id,
73                                 SENSOR_HUB_SYNC,
74                                 humid_st->humidity_attr.logical_minimum < 0);
75                 hid_sensor_power_state(&humid_st->common_attributes, false);
76
77                 return IIO_VAL_INT;
78
79         case IIO_CHAN_INFO_SCALE:
80                 *val = humid_st->scale_pre_decml;
81                 *val2 = humid_st->scale_post_decml;
82
83                 return humid_st->scale_precision;
84
85         case IIO_CHAN_INFO_OFFSET:
86                 *val = humid_st->value_offset;
87
88                 return IIO_VAL_INT;
89
90         case IIO_CHAN_INFO_SAMP_FREQ:
91                 return hid_sensor_read_samp_freq_value(
92                                 &humid_st->common_attributes, val, val2);
93
94         case IIO_CHAN_INFO_HYSTERESIS:
95                 return hid_sensor_read_raw_hyst_value(
96                                 &humid_st->common_attributes, val, val2);
97
98         default:
99                 return -EINVAL;
100         }
101 }
102
103 static int humidity_write_raw(struct iio_dev *indio_dev,
104                                 struct iio_chan_spec const *chan,
105                                 int val, int val2, long mask)
106 {
107         struct hid_humidity_state *humid_st = iio_priv(indio_dev);
108
109         switch (mask) {
110         case IIO_CHAN_INFO_SAMP_FREQ:
111                 return hid_sensor_write_samp_freq_value(
112                                 &humid_st->common_attributes, val, val2);
113
114         case IIO_CHAN_INFO_HYSTERESIS:
115                 return hid_sensor_write_raw_hyst_value(
116                                 &humid_st->common_attributes, val, val2);
117
118         default:
119                 return -EINVAL;
120         }
121 }
122
123 static const struct iio_info humidity_info = {
124         .read_raw = &humidity_read_raw,
125         .write_raw = &humidity_write_raw,
126 };
127
128 /* Callback handler to send event after all samples are received and captured */
129 static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
130                                 unsigned int usage_id, void *pdev)
131 {
132         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
133         struct hid_humidity_state *humid_st = iio_priv(indio_dev);
134
135         if (atomic_read(&humid_st->common_attributes.data_ready))
136                 iio_push_to_buffers_with_timestamp(indio_dev, &humid_st->scan,
137                                                    iio_get_time_ns(indio_dev));
138
139         return 0;
140 }
141
142 /* Capture samples in local storage */
143 static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
144                                 unsigned int usage_id, size_t raw_len,
145                                 char *raw_data, void *pdev)
146 {
147         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
148         struct hid_humidity_state *humid_st = iio_priv(indio_dev);
149
150         switch (usage_id) {
151         case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY:
152                 humid_st->scan.humidity_data = *(s32 *)raw_data;
153
154                 return 0;
155         default:
156                 return -EINVAL;
157         }
158 }
159
160 /* Parse report which is specific to an usage id */
161 static int humidity_parse_report(struct platform_device *pdev,
162                                 struct hid_sensor_hub_device *hsdev,
163                                 struct iio_chan_spec *channels,
164                                 unsigned int usage_id,
165                                 struct hid_humidity_state *st)
166 {
167         int ret;
168
169         ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
170                                         usage_id,
171                                         HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
172                                         &st->humidity_attr);
173         if (ret < 0)
174                 return ret;
175
176         humidity_adjust_channel_bit_mask(channels, 0, st->humidity_attr.size);
177
178         st->scale_precision = hid_sensor_format_scale(
179                                                 HID_USAGE_SENSOR_HUMIDITY,
180                                                 &st->humidity_attr,
181                                                 &st->scale_pre_decml,
182                                                 &st->scale_post_decml);
183
184         return ret;
185 }
186
187 static struct hid_sensor_hub_callbacks humidity_callbacks = {
188         .send_event = &humidity_proc_event,
189         .capture_sample = &humidity_capture_sample,
190 };
191
192 /* Function to initialize the processing for usage id */
193 static int hid_humidity_probe(struct platform_device *pdev)
194 {
195         static const char *name = "humidity";
196         struct iio_dev *indio_dev;
197         struct hid_humidity_state *humid_st;
198         struct iio_chan_spec *humid_chans;
199         struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
200         int ret;
201
202         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*humid_st));
203         if (!indio_dev)
204                 return -ENOMEM;
205
206         humid_st = iio_priv(indio_dev);
207         humid_st->common_attributes.hsdev = hsdev;
208         humid_st->common_attributes.pdev = pdev;
209
210         ret = hid_sensor_parse_common_attributes(hsdev,
211                                         HID_USAGE_SENSOR_HUMIDITY,
212                                         &humid_st->common_attributes,
213                                         humidity_sensitivity_addresses,
214                                         ARRAY_SIZE(humidity_sensitivity_addresses));
215         if (ret)
216                 return ret;
217
218         humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
219                                         sizeof(humidity_channels), GFP_KERNEL);
220         if (!humid_chans)
221                 return -ENOMEM;
222
223         ret = humidity_parse_report(pdev, hsdev, humid_chans,
224                                 HID_USAGE_SENSOR_HUMIDITY, humid_st);
225         if (ret)
226                 return ret;
227
228         indio_dev->channels = humid_chans;
229         indio_dev->num_channels = ARRAY_SIZE(humidity_channels);
230         indio_dev->info = &humidity_info;
231         indio_dev->name = name;
232         indio_dev->modes = INDIO_DIRECT_MODE;
233
234         atomic_set(&humid_st->common_attributes.data_ready, 0);
235
236         ret = hid_sensor_setup_trigger(indio_dev, name,
237                                 &humid_st->common_attributes);
238         if (ret)
239                 return ret;
240
241         platform_set_drvdata(pdev, indio_dev);
242
243         humidity_callbacks.pdev = pdev;
244         ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
245                                         &humidity_callbacks);
246         if (ret)
247                 goto error_remove_trigger;
248
249         ret = iio_device_register(indio_dev);
250         if (ret)
251                 goto error_remove_callback;
252
253         return ret;
254
255 error_remove_callback:
256         sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
257 error_remove_trigger:
258         hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
259         return ret;
260 }
261
262 /* Function to deinitialize the processing for usage id */
263 static int hid_humidity_remove(struct platform_device *pdev)
264 {
265         struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
266         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
267         struct hid_humidity_state *humid_st = iio_priv(indio_dev);
268
269         iio_device_unregister(indio_dev);
270         sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
271         hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
272
273         return 0;
274 }
275
276 static const struct platform_device_id hid_humidity_ids[] = {
277         {
278                 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */
279                 .name = "HID-SENSOR-200032",
280         },
281         { /* sentinel */ }
282 };
283 MODULE_DEVICE_TABLE(platform, hid_humidity_ids);
284
285 static struct platform_driver hid_humidity_platform_driver = {
286         .id_table = hid_humidity_ids,
287         .driver = {
288                 .name   = KBUILD_MODNAME,
289                 .pm     = &hid_sensor_pm_ops,
290         },
291         .probe          = hid_humidity_probe,
292         .remove         = hid_humidity_remove,
293 };
294 module_platform_driver(hid_humidity_platform_driver);
295
296 MODULE_DESCRIPTION("HID Environmental humidity sensor");
297 MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>");
298 MODULE_LICENSE("GPL v2");
299 MODULE_IMPORT_NS(IIO_HID);