drivers/idle/i7300_idle.c

   1 /*
   2  * (C) Copyright 2008 Intel Corporation
   3  * Authors:
   4  * Andy Henroid <andrew.d.henroid@intel.com>
   5  * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
   6  */
   7
   8 /*
   9  * Save DIMM power on Intel 7300-based platforms when all CPUs/cores
  10  * are idle, using the DIMM thermal throttling capability.
  11  *
  12  * This driver depends on the Intel integrated DMA controller (I/O AT).
  13  * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
  14  * this driver should work cooperatively.
  15  */
  16
  17 /* #define DEBUG */
  18
  19 #include <linux/module.h>
  20 #include <linux/pci.h>
  21 #include <linux/gfp.h>
  22 #include <linux/sched.h>
  23 #include <linux/notifier.h>
  24 #include <linux/cpumask.h>
  25 #include <linux/ktime.h>
  26 #include <linux/delay.h>
  27 #include <linux/debugfs.h>
  28 #include <linux/stop_machine.h>
  29 #include <linux/i7300_idle.h>
  30
  31 #include <asm/idle.h>
  32
  33 #include "../dma/ioat/hw.h"
  34 #include "../dma/ioat/registers.h"
  35
  36 #define I7300_IDLE_DRIVER_VERSION       "1.55"
  37 #define I7300_PRINT                     "i7300_idle:"
  38
  39 #define MAX_STOP_RETRIES        10
  40
  41 static int debug;
  42 module_param_named(debug, debug, uint, 0644);
  43 MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
  44
  45 static int forceload;
  46 module_param_named(forceload, forceload, uint, 0644);
  47 MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
  48
  49 #define dprintk(fmt, arg...) \
  50         do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
  51
  52 /*
  53  * Value to set THRTLOW to when initiating throttling
  54  *  0 = No throttling
  55  *  1 = Throttle when > 4 activations per eval window (Maximum throttling)
  56  *  2 = Throttle when > 8 activations
  57  *  168 = Throttle when > 672 activations (Minimum throttling)
  58  */
  59 #define MAX_THROTTLE_LOW_LIMIT          168
  60 static uint throttle_low_limit = 1;
  61 module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
  62 MODULE_PARM_DESC(throttle_low_limit,
  63                 "Value for THRTLOWLM activation field "
  64                 "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
  65
  66 /*
  67  * simple invocation and duration statistics
  68  */
  69 static unsigned long total_starts;
  70 static unsigned long total_us;
  71
  72 #ifdef DEBUG
  73 static unsigned long past_skip;
  74 #endif
  75
  76 static struct pci_dev *fbd_dev;
  77
  78 static spinlock_t i7300_idle_lock;
  79 static int i7300_idle_active;
  80
  81 static u8 i7300_idle_thrtctl_saved;
  82 static u8 i7300_idle_thrtlow_saved;
  83 static u32 i7300_idle_mc_saved;
  84
  85 static cpumask_var_t idle_cpumask;
  86 static ktime_t start_ktime;
  87 static unsigned long avg_idle_us;
  88
  89 static struct dentry *debugfs_dir;
  90
  91 /* Begin: I/O AT Helper routines */
  92
  93 #define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
  94 /* Snoop control (disable snoops when coherency is not important) */
  95 #define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
  96 #define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
  97
  98 static struct pci_dev *ioat_dev;
  99 static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */
 100 static unsigned long ioat_desc_phys;
 101 static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */
 102 static u8 *ioat_chanbase;
 103
 104 /* Start I/O AT memory copy */
 105 static int i7300_idle_ioat_start(void)
 106 {
 107         u32 err;
 108         /* Clear error (due to circular descriptor pointer) */
 109         err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET);
 110         if (err)
 111                 writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET);
 112
 113         writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 114         return 0;
 115 }
 116
 117 /* Stop I/O AT memory copy */
 118 static void i7300_idle_ioat_stop(void)
 119 {
 120         int i;
 121         u64 sts;
 122
 123         for (i = 0; i < MAX_STOP_RETRIES; i++) {
 124                 writeb(IOAT_CHANCMD_RESET,
 125                         ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 126
 127                 udelay(10);
 128
 129                 sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 130                         IOAT_CHANSTS_STATUS;
 131
 132                 if (sts != IOAT_CHANSTS_ACTIVE)
 133                         break;
 134
 135         }
 136
 137         if (i == MAX_STOP_RETRIES) {
 138                 dprintk("failed to stop I/O AT after %d retries\n",
 139                         MAX_STOP_RETRIES);
 140         }
 141 }
 142
 143 /* Test I/O AT by copying 1024 byte from 2k to 1k */
 144 static int __init i7300_idle_ioat_selftest(u8 *ctl,
 145                 struct ioat_dma_descriptor *desc, unsigned long desc_phys)
 146 {
 147         u64 chan_sts;
 148
 149         memset(desc, 0, 2048);
 150         memset((u8 *) desc + 2048, 0xab, 1024);
 151
 152         desc[0].size = 1024;
 153         desc[0].ctl = 0;
 154         desc[0].src_addr = desc_phys + 2048;
 155         desc[0].dst_addr = desc_phys + 1024;
 156         desc[0].next = 0;
 157
 158         writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 159         writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 160
 161         udelay(1000);
 162
 163         chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 164                         IOAT_CHANSTS_STATUS;
 165
 166         if (chan_sts != IOAT_CHANSTS_DONE) {
 167                 /* Not complete, reset the channel */
 168                 writeb(IOAT_CHANCMD_RESET,
 169                        ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 170                 return -1;
 171         }
 172
 173         if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab ||
 174             *(u32 *) ((u8 *) desc + 2044) != 0xabababab) {
 175                 dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
 176                         *(u32 *) ((u8 *) desc + 2048),
 177                         *(u32 *) ((u8 *) desc + 1024),
 178                         *(u32 *) ((u8 *) desc + 3072));
 179                 return -1;
 180         }
 181         return 0;
 182 }
 183
 184 static struct device dummy_dma_dev = {
 185         .init_name = "fallback device",
 186         .coherent_dma_mask = DMA_BIT_MASK(64),
 187         .dma_mask = &dummy_dma_dev.coherent_dma_mask,
 188 };
 189
 190 /* Setup and initialize I/O AT */
 191 /* This driver needs I/O AT as the throttling takes effect only when there is
 192  * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
 193  * go idle and memory is throttled.
 194  */
 195 static int __init i7300_idle_ioat_init(void)
 196 {
 197         u8 ver, chan_count, ioat_chan;
 198         u16 chan_ctl;
 199
 200         ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0),
 201                                             pci_resource_len(ioat_dev, 0));
 202
 203         if (!ioat_iomap) {
 204                 printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n");
 205                 goto err_ret;
 206         }
 207
 208         ver = readb(ioat_iomap + IOAT_VER_OFFSET);
 209         if (ver != IOAT_VER_1_2) {
 210                 printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n",
 211                         ver >> 4, ver & 0xf);
 212                 goto err_unmap;
 213         }
 214
 215         chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET);
 216         if (!chan_count) {
 217                 printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels "
 218                         "(%u)\n",
 219                         chan_count);
 220                 goto err_unmap;
 221         }
 222
 223         ioat_chan = chan_count - 1;
 224         ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan);
 225
 226         chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 227         if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) {
 228                 printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan);
 229                 goto err_unmap;
 230         }
 231
 232         writew(IOAT_CHANCTRL_CHANNEL_IN_USE,
 233                 ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 234
 235         ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent(
 236                         &dummy_dma_dev, 4096,
 237                         (dma_addr_t *)&ioat_desc_phys, GFP_KERNEL);
 238         if (!ioat_desc) {
 239                 printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n");
 240                 goto err_mark_unused;
 241         }
 242
 243         writel(ioat_desc_phys & 0xffffffffUL,
 244                ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW);
 245         writel(ioat_desc_phys >> 32,
 246                ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH);
 247
 248         if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) {
 249                 printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n");
 250                 goto err_free;
 251         }
 252
 253         /* Setup circular I/O AT descriptor chain */
 254         ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL;
 255         ioat_desc[0].src_addr = ioat_desc_phys + 2048;
 256         ioat_desc[0].dst_addr = ioat_desc_phys + 3072;
 257         ioat_desc[0].size = 128;
 258         ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor);
 259
 260         ioat_desc[1].ctl = ioat_desc[0].ctl;
 261         ioat_desc[1].src_addr = ioat_desc[0].src_addr;
 262         ioat_desc[1].dst_addr = ioat_desc[0].dst_addr;
 263         ioat_desc[1].size = ioat_desc[0].size;
 264         ioat_desc[1].next = ioat_desc_phys;
 265
 266         return 0;
 267
 268 err_free:
 269         dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
 270 err_mark_unused:
 271         writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 272 err_unmap:
 273         iounmap(ioat_iomap);
 274 err_ret:
 275         return -ENODEV;
 276 }
 277
 278 /* Cleanup I/O AT */
 279 static void __exit i7300_idle_ioat_exit(void)
 280 {
 281         int i;
 282         u64 chan_sts;
 283
 284         i7300_idle_ioat_stop();
 285
 286         /* Wait for a while for the channel to halt before releasing */
 287         for (i = 0; i < MAX_STOP_RETRIES; i++) {
 288                 writeb(IOAT_CHANCMD_RESET,
 289                        ioat_chanbase + IOAT1_CHANCMD_OFFSET);
 290
 291                 chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 292                         IOAT_CHANSTS_STATUS;
 293
 294                 if (chan_sts != IOAT_CHANSTS_ACTIVE) {
 295                         writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
 296                         break;
 297                 }
 298                 udelay(1000);
 299         }
 300
 301         chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
 302                         IOAT_CHANSTS_STATUS;
 303
 304         /*
 305          * We tried to reset multiple times. If IO A/T channel is still active
 306          * flag an error and return without cleanup. Memory leak is better
 307          * than random corruption in that extreme error situation.
 308          */
 309         if (chan_sts == IOAT_CHANSTS_ACTIVE) {
 310                 printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
 311                         " Not freeing resources\n");
 312                 return;
 313         }
 314
 315         dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
 316         iounmap(ioat_iomap);
 317 }
 318
 319 /* End: I/O AT Helper routines */
 320
 321 #define DIMM_THRTLOW 0x64
 322 #define DIMM_THRTCTL 0x67
 323 #define DIMM_THRTCTL_THRMHUNT (1UL << 0)
 324 #define DIMM_MC 0x40
 325 #define DIMM_GTW_MODE (1UL << 17)
 326 #define DIMM_GBLACT 0x60
 327
 328 /*
 329  * Keep track of an exponential-decaying average of recent idle durations.
 330  * The latest duration gets DURATION_WEIGHT_PCT percentage weight
 331  * in this average, with the old average getting the remaining weight.
 332  *
 333  * High weights emphasize recent history, low weights include long history.
 334  */
 335 #define DURATION_WEIGHT_PCT 55
 336
 337 /*
 338  * When the decaying average of recent durations or the predicted duration
 339  * of the next timer interrupt is shorter than duration_threshold, the
 340  * driver will decline to throttle.
 341  */
 342 #define DURATION_THRESHOLD_US 100
 343
 344
 345 /* Store DIMM thermal throttle configuration */
 346 static int i7300_idle_thrt_save(void)
 347 {
 348         u32 new_mc_val;
 349         u8 gblactlm;
 350
 351         pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved);
 352         pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved);
 353         pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved);
 354         /*
 355          * Make sure we have Global Throttling Window Mode set to have a
 356          * "short" window. This (mostly) works around an issue where
 357          * throttling persists until the end of the global throttling window
 358          * size. On the tested system, this was resulting in a maximum of
 359          * 64 ms to exit throttling (average 32 ms). The actual numbers
 360          * depends on system frequencies. Setting the short window reduces
 361          * this by a factor of 4096.
 362          *
 363          * We will only do this only if the system is set for
 364          * unlimited-activations while in open-loop throttling (i.e., when
 365          * Global Activation Throttle Limit is zero).
 366          */
 367         pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm);
 368         dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
 369                 i7300_idle_thrtctl_saved,
 370                 i7300_idle_thrtlow_saved);
 371         dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
 372                 i7300_idle_mc_saved,
 373                 gblactlm);
 374         if (gblactlm == 0) {
 375                 new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE;
 376                 pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val);
 377                 return 0;
 378         } else {
 379                 dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
 380                 return -ENODEV;
 381         }
 382 }
 383
 384 /* Restore DIMM thermal throttle configuration */
 385 static void i7300_idle_thrt_restore(void)
 386 {
 387         pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved);
 388         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
 389         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
 390 }
 391
 392 /* Enable DIMM thermal throttling */
 393 static void i7300_idle_start(void)
 394 {
 395         u8 new_ctl;
 396         u8 limit;
 397
 398         new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
 399         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 400
 401         limit = throttle_low_limit;
 402         if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
 403                 limit = MAX_THROTTLE_LOW_LIMIT;
 404
 405         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
 406
 407         new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT;
 408         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 409 }
 410
 411 /* Disable DIMM thermal throttling */
 412 static void i7300_idle_stop(void)
 413 {
 414         u8 new_ctl;
 415         u8 got_ctl;
 416
 417         new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
 418         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
 419
 420         pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
 421         pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
 422         pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl);
 423         WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved);
 424 }
 425
 426
 427 /*
 428  * i7300_avg_duration_check()
 429  * return 0 if the decaying average of recent idle durations is
 430  * more than DURATION_THRESHOLD_US
 431  */
 432 static int i7300_avg_duration_check(void)
 433 {
 434         if (avg_idle_us >= DURATION_THRESHOLD_US)
 435                 return 0;
 436
 437 #ifdef DEBUG
 438         past_skip++;
 439 #endif
 440         return 1;
 441 }
 442
 443 /* Idle notifier to look at idle CPUs */
 444 static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
 445                                 void *data)
 446 {
 447         unsigned long flags;
 448         ktime_t now_ktime;
 449         static ktime_t idle_begin_time;
 450         static int time_init = 1;
 451
 452         if (!throttle_low_limit)
 453                 return 0;
 454
 455         if (unlikely(time_init)) {
 456                 time_init = 0;
 457                 idle_begin_time = ktime_get();
 458         }
 459
 460         spin_lock_irqsave(&i7300_idle_lock, flags);
 461         if (val == IDLE_START) {
 462
 463                 cpumask_set_cpu(smp_processor_id(), idle_cpumask);
 464
 465                 if (cpumask_weight(idle_cpumask) != num_online_cpus())
 466                         goto end;
 467
 468                 now_ktime = ktime_get();
 469                 idle_begin_time = now_ktime;
 470
 471                 if (i7300_avg_duration_check())
 472                         goto end;
 473
 474                 i7300_idle_active = 1;
 475                 total_starts++;
 476                 start_ktime = now_ktime;
 477
 478                 i7300_idle_start();
 479                 i7300_idle_ioat_start();
 480
 481         } else if (val == IDLE_END) {
 482                 cpumask_clear_cpu(smp_processor_id(), idle_cpumask);
 483                 if (cpumask_weight(idle_cpumask) == (num_online_cpus() - 1)) {
 484                         /* First CPU coming out of idle */
 485                         u64 idle_duration_us;
 486
 487                         now_ktime = ktime_get();
 488
 489                         idle_duration_us = ktime_to_us(ktime_sub
 490                                                 (now_ktime, idle_begin_time));
 491
 492                         avg_idle_us =
 493                                 ((100 - DURATION_WEIGHT_PCT) * avg_idle_us +
 494                                  DURATION_WEIGHT_PCT * idle_duration_us) / 100;
 495
 496                         if (i7300_idle_active) {
 497                                 ktime_t idle_ktime;
 498
 499                                 idle_ktime = ktime_sub(now_ktime, start_ktime);
 500                                 total_us += ktime_to_us(idle_ktime);
 501
 502                                 i7300_idle_ioat_stop();
 503                                 i7300_idle_stop();
 504                                 i7300_idle_active = 0;
 505                         }
 506                 }
 507         }
 508 end:
 509         spin_unlock_irqrestore(&i7300_idle_lock, flags);
 510         return 0;
 511 }
 512
 513 static struct notifier_block i7300_idle_nb = {
 514         .notifier_call = i7300_idle_notifier,
 515 };
 516
 517 MODULE_DEVICE_TABLE(pci, pci_tbl);
 518
 519 int stats_open_generic(struct inode *inode, struct file *fp)
 520 {
 521         fp->private_data = inode->i_private;
 522         return 0;
 523 }
 524
 525 static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count,
 526                                 loff_t *off)
 527 {
 528         unsigned long *p = fp->private_data;
 529         char buf[32];
 530         int len;
 531
 532         len = snprintf(buf, 32, "%lu\n", *p);
 533         return simple_read_from_buffer(ubuf, count, off, buf, len);
 534 }
 535
 536 static const struct file_operations idle_fops = {
 537         .open   = stats_open_generic,
 538         .read   = stats_read_ul,
 539 };
 540
 541 struct debugfs_file_info {
 542         void *ptr;
 543         char name[32];
 544         struct dentry *file;
 545 } debugfs_file_list[] = {
 546                                 {&total_starts, "total_starts", NULL},
 547                                 {&total_us, "total_us", NULL},
 548 #ifdef DEBUG
 549                                 {&past_skip, "past_skip", NULL},
 550 #endif
 551                                 {NULL, "", NULL}
 552                         };
 553
 554 static int __init i7300_idle_init(void)
 555 {
 556         spin_lock_init(&i7300_idle_lock);
 557         total_us = 0;
 558
 559         if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
 560                 return -ENODEV;
 561
 562         if (i7300_idle_thrt_save())
 563                 return -ENODEV;
 564
 565         if (i7300_idle_ioat_init())
 566                 return -ENODEV;
 567
 568         if (!zalloc_cpumask_var(&idle_cpumask, GFP_KERNEL))
 569                 return -ENOMEM;
 570
 571         debugfs_dir = debugfs_create_dir("i7300_idle", NULL);
 572         if (debugfs_dir) {
 573                 int i = 0;
 574
 575                 while (debugfs_file_list[i].ptr != NULL) {
 576                         debugfs_file_list[i].file = debugfs_create_file(
 577                                         debugfs_file_list[i].name,
 578                                         S_IRUSR,
 579                                         debugfs_dir,
 580                                         debugfs_file_list[i].ptr,
 581                                         &idle_fops);
 582                         i++;
 583                 }
 584         }
 585
 586         idle_notifier_register(&i7300_idle_nb);
 587
 588         printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION);
 589         return 0;
 590 }
 591
 592 static void __exit i7300_idle_exit(void)
 593 {
 594         idle_notifier_unregister(&i7300_idle_nb);
 595         free_cpumask_var(idle_cpumask);
 596
 597         if (debugfs_dir) {
 598                 int i = 0;
 599
 600                 while (debugfs_file_list[i].file != NULL) {
 601                         debugfs_remove(debugfs_file_list[i].file);
 602                         i++;
 603                 }
 604
 605                 debugfs_remove(debugfs_dir);
 606         }
 607         i7300_idle_thrt_restore();
 608         i7300_idle_ioat_exit();
 609 }
 610
 611 module_init(i7300_idle_init);
 612 module_exit(i7300_idle_exit);
 613
 614 MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>");
 615 MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
 616                         I7300_IDLE_DRIVER_VERSION);
 617 MODULE_LICENSE("GPL");