drivers/ide/sgiioc4.c

   1 /*
   2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
   3  * Copyright (C) 2008-2009 MontaVista Software, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License
   7  * as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it would be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12  *
  13  * You should have received a copy of the GNU General Public
  14  * License along with this program; if not, write the Free Software
  15  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  16  *
  17  * For further information regarding this notice, see:
  18  *
  19  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/types.h>
  24 #include <linux/pci.h>
  25 #include <linux/delay.h>
  26 #include <linux/init.h>
  27 #include <linux/kernel.h>
  28 #include <linux/ioport.h>
  29 #include <linux/blkdev.h>
  30 #include <linux/scatterlist.h>
  31 #include <linux/ioc4.h>
  32 #include <linux/io.h>
  33 #include <linux/ide.h>
  34
  35 #define DRV_NAME "SGIIOC4"
  36
  37 /* IOC4 Specific Definitions */
  38 #define IOC4_CMD_OFFSET         0x100
  39 #define IOC4_CTRL_OFFSET        0x120
  40 #define IOC4_DMA_OFFSET         0x140
  41 #define IOC4_INTR_OFFSET        0x0
  42
  43 #define IOC4_TIMING             0x00
  44 #define IOC4_DMA_PTR_L          0x01
  45 #define IOC4_DMA_PTR_H          0x02
  46 #define IOC4_DMA_ADDR_L         0x03
  47 #define IOC4_DMA_ADDR_H         0x04
  48 #define IOC4_BC_DEV             0x05
  49 #define IOC4_BC_MEM             0x06
  50 #define IOC4_DMA_CTRL           0x07
  51 #define IOC4_DMA_END_ADDR       0x08
  52
  53 /* Bits in the IOC4 Control/Status Register */
  54 #define IOC4_S_DMA_START        0x01
  55 #define IOC4_S_DMA_STOP         0x02
  56 #define IOC4_S_DMA_DIR          0x04
  57 #define IOC4_S_DMA_ACTIVE       0x08
  58 #define IOC4_S_DMA_ERROR        0x10
  59 #define IOC4_ATA_MEMERR         0x02
  60
  61 /* Read/Write Directions */
  62 #define IOC4_DMA_WRITE          0x04
  63 #define IOC4_DMA_READ           0x00
  64
  65 /* Interrupt Register Offsets */
  66 #define IOC4_INTR_REG           0x03
  67 #define IOC4_INTR_SET           0x05
  68 #define IOC4_INTR_CLEAR         0x07
  69
  70 #define IOC4_IDE_CACHELINE_SIZE 128
  71 #define IOC4_CMD_CTL_BLK_SIZE   0x20
  72 #define IOC4_SUPPORTED_FIRMWARE_REV 46
  73
  74 struct ioc4_dma_regs {
  75         u32 timing_reg0;
  76         u32 timing_reg1;
  77         u32 low_mem_ptr;
  78         u32 high_mem_ptr;
  79         u32 low_mem_addr;
  80         u32 high_mem_addr;
  81         u32 dev_byte_count;
  82         u32 mem_byte_count;
  83         u32 status;
  84 };
  85
  86 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
  87 /* IOC4 has only 1 IDE channel */
  88 #define IOC4_PRD_BYTES          16
  89 #define IOC4_PRD_ENTRIES        (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
  90
  91
  92 static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
  93                                     unsigned long data_port,
  94                                     unsigned long ctrl_port,
  95                                     unsigned long irq_port)
  96 {
  97         unsigned long reg = data_port;
  98         int i;
  99
 100         /* Registers are word (32 bit) aligned */
 101         for (i = 0; i <= 7; i++)
 102                 hw->io_ports_array[i] = reg + i * 4;
 103
 104         hw->io_ports.ctl_addr = ctrl_port;
 105         hw->io_ports.irq_addr = irq_port;
 106 }
 107
 108 static int sgiioc4_checkirq(ide_hwif_t *hwif)
 109 {
 110         unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
 111
 112         if (readl((void __iomem *)intr_addr) & 0x03)
 113                 return 1;
 114
 115         return 0;
 116 }
 117
 118 static u8 sgiioc4_read_status(ide_hwif_t *);
 119
 120 static int sgiioc4_clearirq(ide_drive_t *drive)
 121 {
 122         u32 intr_reg;
 123         ide_hwif_t *hwif = drive->hwif;
 124         struct ide_io_ports *io_ports = &hwif->io_ports;
 125         unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
 126
 127         /* Code to check for PCI error conditions */
 128         intr_reg = readl((void __iomem *)other_ir);
 129         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 130                 /*
 131                  * Using sgiioc4_read_status to read the Status register has a
 132                  * side effect of clearing the interrupt.  The first read should
 133                  * clear it if it is set.  The second read should return
 134                  * a "clear" status if it got cleared.  If not, then spin
 135                  * for a bit trying to clear it.
 136                  */
 137                 u8 stat = sgiioc4_read_status(hwif);
 138                 int count = 0;
 139
 140                 stat = sgiioc4_read_status(hwif);
 141                 while ((stat & ATA_BUSY) && (count++ < 100)) {
 142                         udelay(1);
 143                         stat = sgiioc4_read_status(hwif);
 144                 }
 145
 146                 if (intr_reg & 0x02) {
 147                         struct pci_dev *dev = to_pci_dev(hwif->dev);
 148                         /* Error when transferring DMA data on PCI bus */
 149                         u32 pci_err_addr_low, pci_err_addr_high,
 150                             pci_stat_cmd_reg;
 151
 152                         pci_err_addr_low =
 153                                 readl((void __iomem *)io_ports->irq_addr);
 154                         pci_err_addr_high =
 155                                 readl((void __iomem *)(io_ports->irq_addr + 4));
 156                         pci_read_config_dword(dev, PCI_COMMAND,
 157                                               &pci_stat_cmd_reg);
 158                         printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
 159                                "status-cmd reg is 0x%x\n",
 160                                __func__, drive->name, pci_stat_cmd_reg);
 161                         printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
 162                                __func__, drive->name,
 163                                pci_err_addr_high, pci_err_addr_low);
 164                         /* Clear the PCI Error indicator */
 165                         pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
 166                 }
 167
 168                 /* Clear the Interrupt, Error bits on the IOC4 */
 169                 writel(0x03, (void __iomem *)other_ir);
 170
 171                 intr_reg = readl((void __iomem *)other_ir);
 172         }
 173
 174         return intr_reg & 3;
 175 }
 176
 177 static void sgiioc4_dma_start(ide_drive_t *drive)
 178 {
 179         ide_hwif_t *hwif = drive->hwif;
 180         unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
 181         unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
 182         unsigned int temp_reg = reg | IOC4_S_DMA_START;
 183
 184         writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 185 }
 186
 187 static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 188 {
 189         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 190         u32     ioc4_dma;
 191         int     count;
 192
 193         count = 0;
 194         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 195         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
 196                 udelay(1);
 197                 ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 198         }
 199         return ioc4_dma;
 200 }
 201
 202 /* Stops the IOC4 DMA Engine */
 203 static int sgiioc4_dma_end(ide_drive_t *drive)
 204 {
 205         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
 206         ide_hwif_t *hwif = drive->hwif;
 207         unsigned long dma_base = hwif->dma_base;
 208         int dma_stat = 0;
 209         unsigned long *ending_dma = ide_get_hwifdata(hwif);
 210
 211         writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
 212
 213         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 214
 215         if (ioc4_dma & IOC4_S_DMA_STOP) {
 216                 printk(KERN_ERR
 217                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
 218                        "ioc4_dma_reg 0x%x\n",
 219                        __func__, drive->name, ioc4_dma);
 220                 dma_stat = 1;
 221         }
 222
 223         /*
 224          * The IOC4 will DMA 1's to the ending DMA area to indicate that
 225          * previous data DMA is complete.  This is necessary because of relaxed
 226          * ordering between register reads and DMA writes on the Altix.
 227          */
 228         while ((cnt++ < 200) && (!valid)) {
 229                 for (num = 0; num < 16; num++) {
 230                         if (ending_dma[num]) {
 231                                 valid = 1;
 232                                 break;
 233                         }
 234                 }
 235                 udelay(1);
 236         }
 237         if (!valid) {
 238                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
 239                        drive->name);
 240                 dma_stat = 1;
 241         }
 242
 243         bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
 244         bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
 245
 246         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
 247                 if (bc_dev > bc_mem + 8) {
 248                         printk(KERN_ERR
 249                                "%s(%s): WARNING!! byte_count_dev %d "
 250                                "!= byte_count_mem %d\n",
 251                                __func__, drive->name, bc_dev, bc_mem);
 252                 }
 253         }
 254
 255         return dma_stat;
 256 }
 257
 258 static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 259 {
 260 }
 261
 262 /* Returns 1 if DMA IRQ issued, 0 otherwise */
 263 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
 264 {
 265         return sgiioc4_checkirq(drive->hwif);
 266 }
 267
 268 static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
 269 {
 270         if (!on)
 271                 sgiioc4_clearirq(drive);
 272 }
 273
 274 static void sgiioc4_resetproc(ide_drive_t *drive)
 275 {
 276         struct ide_cmd *cmd = &drive->hwif->cmd;
 277
 278         sgiioc4_dma_end(drive);
 279         ide_dma_unmap_sg(drive, cmd);
 280         sgiioc4_clearirq(drive);
 281 }
 282
 283 static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
 284 {
 285         sgiioc4_resetproc(drive);
 286
 287         ide_dma_lost_irq(drive);
 288 }
 289
 290 static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 291 {
 292         unsigned long port = hwif->io_ports.status_addr;
 293         u8 reg = (u8) readb((void __iomem *) port);
 294
 295         if (!(reg & ATA_BUSY)) {        /* Not busy... check for interrupt */
 296                 unsigned long other_ir = port - 0x110;
 297                 unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 298
 299                 /* Clear the Interrupt, Error bits on the IOC4 */
 300                 if (intr_reg & 0x03) {
 301                         writel(0x03, (void __iomem *) other_ir);
 302                         intr_reg = (u32) readl((void __iomem *) other_ir);
 303                 }
 304         }
 305
 306         return reg;
 307 }
 308
 309 /* Creates a DMA map for the scatter-gather list entries */
 310 static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 311 {
 312         struct pci_dev *dev = to_pci_dev(hwif->dev);
 313         unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 314         int num_ports = sizeof(struct ioc4_dma_regs);
 315         void *pad;
 316
 317         printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
 318
 319         if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
 320                 printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
 321                        "already in use\n", __func__, hwif->name,
 322                        dma_base, dma_base + num_ports - 1);
 323                 return -1;
 324         }
 325
 326         hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
 327                          IOC4_DMA_OFFSET;
 328
 329         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 330
 331         hwif->prd_max_nents = IOC4_PRD_ENTRIES;
 332         hwif->prd_ent_size = IOC4_PRD_BYTES;
 333
 334         if (ide_allocate_dma_engine(hwif))
 335                 goto dma_pci_alloc_failure;
 336
 337         pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
 338                                    (dma_addr_t *)&hwif->extra_base);
 339         if (pad) {
 340                 ide_set_hwifdata(hwif, pad);
 341                 return 0;
 342         }
 343
 344         ide_release_dma_engine(hwif);
 345
 346         printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
 347                __func__, hwif->name);
 348         printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
 349
 350 dma_pci_alloc_failure:
 351         release_mem_region(dma_base, num_ports);
 352
 353         return -1;
 354 }
 355
 356 /* Initializes the IOC4 DMA Engine */
 357 static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
 358 {
 359         u32 ioc4_dma;
 360         ide_hwif_t *hwif = drive->hwif;
 361         unsigned long dma_base = hwif->dma_base;
 362         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 363         u32 dma_addr, ending_dma_addr;
 364
 365         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 366
 367         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
 368                 printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
 369                        "transfer was still active\n", __func__, drive->name);
 370                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 371                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 372
 373                 if (ioc4_dma & IOC4_S_DMA_STOP)
 374                         printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
 375                                "still 1\n", __func__, drive->name);
 376         }
 377
 378         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 379         if (ioc4_dma & IOC4_S_DMA_ERROR) {
 380                 printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
 381                        "previous transfer, status 0x%x\n",
 382                        __func__, drive->name, ioc4_dma);
 383                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 384                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 385
 386                 if (ioc4_dma & IOC4_S_DMA_STOP)
 387                         printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
 388                                "still 1\n", __func__, drive->name);
 389         }
 390
 391         /* Address of the Scatter Gather List */
 392         dma_addr = cpu_to_le32(hwif->dmatable_dma);
 393         writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
 394
 395         /* Address of the Ending DMA */
 396         memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 397         ending_dma_addr = cpu_to_le32(hwif->extra_base);
 398         writel(ending_dma_addr, (void __iomem *)(dma_base +
 399                                                  IOC4_DMA_END_ADDR * 4));
 400
 401         writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 402 }
 403
 404 /* IOC4 Scatter Gather list Format                                       */
 405 /* 128 Bit entries to support 64 bit addresses in the future             */
 406 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
 407 /* --------------------------------------------------------------------- */
 408 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
 409 /* --------------------------------------------------------------------- */
 410 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
 411 /* --------------------------------------------------------------------- */
 412 /* Creates the scatter gather list, DMA Table                            */
 413
 414 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 415 {
 416         ide_hwif_t *hwif = drive->hwif;
 417         unsigned int *table = hwif->dmatable_cpu;
 418         unsigned int count = 0, i = cmd->sg_nents;
 419         struct scatterlist *sg = hwif->sg_table;
 420
 421         while (i && sg_dma_len(sg)) {
 422                 dma_addr_t cur_addr;
 423                 int cur_len;
 424                 cur_addr = sg_dma_address(sg);
 425                 cur_len = sg_dma_len(sg);
 426
 427                 while (cur_len) {
 428                         if (count++ >= IOC4_PRD_ENTRIES) {
 429                                 printk(KERN_WARNING
 430                                        "%s: DMA table too small\n",
 431                                        drive->name);
 432                                 return 0;
 433                         } else {
 434                                 u32 bcount =
 435                                     0x10000 - (cur_addr & 0xffff);
 436
 437                                 if (bcount > cur_len)
 438                                         bcount = cur_len;
 439
 440                                 /*
 441                                  * Put the address, length in
 442                                  * the IOC4 dma-table format
 443                                  */
 444                                 *table = 0x0;
 445                                 table++;
 446                                 *table = cpu_to_be32(cur_addr);
 447                                 table++;
 448                                 *table = 0x0;
 449                                 table++;
 450
 451                                 *table = cpu_to_be32(bcount);
 452                                 table++;
 453
 454                                 cur_addr += bcount;
 455                                 cur_len -= bcount;
 456                         }
 457                 }
 458
 459                 sg = sg_next(sg);
 460                 i--;
 461         }
 462
 463         if (count) {
 464                 table--;
 465                 *table |= cpu_to_be32(0x80000000);
 466                 return count;
 467         }
 468
 469         return 0;               /* revert to PIO for this request */
 470 }
 471
 472 static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 473 {
 474         int ddir;
 475         u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 476
 477         if (sgiioc4_build_dmatable(drive, cmd) == 0)
 478                 /* try PIO instead of DMA */
 479                 return 1;
 480
 481         if (write)
 482                 /* Writes TO the IOC4 FROM Main Memory */
 483                 ddir = IOC4_DMA_READ;
 484         else
 485                 /* Writes FROM the IOC4 TO Main Memory */
 486                 ddir = IOC4_DMA_WRITE;
 487
 488         sgiioc4_configure_for_dma(ddir, drive);
 489
 490         return 0;
 491 }
 492
 493 static const struct ide_tp_ops sgiioc4_tp_ops = {
 494         .exec_command           = ide_exec_command,
 495         .read_status            = sgiioc4_read_status,
 496         .read_altstatus         = ide_read_altstatus,
 497         .write_devctl           = ide_write_devctl,
 498
 499         .dev_select             = ide_dev_select,
 500         .tf_load                = ide_tf_load,
 501         .tf_read                = ide_tf_read,
 502
 503         .input_data             = ide_input_data,
 504         .output_data            = ide_output_data,
 505 };
 506
 507 static const struct ide_port_ops sgiioc4_port_ops = {
 508         .set_dma_mode           = sgiioc4_set_dma_mode,
 509         /* reset DMA engine, clear IRQs */
 510         .resetproc              = sgiioc4_resetproc,
 511 };
 512
 513 static const struct ide_dma_ops sgiioc4_dma_ops = {
 514         .dma_host_set           = sgiioc4_dma_host_set,
 515         .dma_setup              = sgiioc4_dma_setup,
 516         .dma_start              = sgiioc4_dma_start,
 517         .dma_end                = sgiioc4_dma_end,
 518         .dma_test_irq           = sgiioc4_dma_test_irq,
 519         .dma_lost_irq           = sgiioc4_dma_lost_irq,
 520 };
 521
 522 static const struct ide_port_info sgiioc4_port_info = {
 523         .name                   = DRV_NAME,
 524         .chipset                = ide_pci,
 525         .init_dma               = ide_dma_sgiioc4,
 526         .tp_ops                 = &sgiioc4_tp_ops,
 527         .port_ops               = &sgiioc4_port_ops,
 528         .dma_ops                = &sgiioc4_dma_ops,
 529         .host_flags             = IDE_HFLAG_MMIO,
 530         .irq_flags              = IRQF_SHARED,
 531         .mwdma_mask             = ATA_MWDMA2_ONLY,
 532 };
 533
 534 static int sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 535 {
 536         unsigned long cmd_base, irqport;
 537         unsigned long bar0, cmd_phys_base, ctl;
 538         void __iomem *virt_base;
 539         struct ide_hw hw, *hws[] = { &hw };
 540         int rc;
 541
 542         /* Get the CmdBlk and CtrlBlk base registers */
 543         bar0 = pci_resource_start(dev, 0);
 544         virt_base = pci_ioremap_bar(dev, 0);
 545         if (virt_base == NULL) {
 546                 printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 547                                 DRV_NAME, bar0);
 548                 return -ENOMEM;
 549         }
 550         cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
 551         ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
 552         irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
 553
 554         cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 555         if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 556                                DRV_NAME) == NULL) {
 557                 printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
 558                        "already in use\n", DRV_NAME, pci_name(dev),
 559                        cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 560                 rc = -EBUSY;
 561                 goto req_mem_rgn_err;
 562         }
 563
 564         /* Initialize the IO registers */
 565         memset(&hw, 0, sizeof(hw));
 566         sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 567         hw.irq = dev->irq;
 568         hw.dev = &dev->dev;
 569
 570         /* Initialize chipset IRQ registers */
 571         writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 572
 573         rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
 574         if (!rc)
 575                 return 0;
 576
 577         release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
 578 req_mem_rgn_err:
 579         iounmap(virt_base);
 580         return rc;
 581 }
 582
 583 static unsigned int pci_init_sgiioc4(struct pci_dev *dev)
 584 {
 585         int ret;
 586
 587         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
 588                          DRV_NAME, pci_name(dev), dev->revision);
 589
 590         if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
 591                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
 592                                 "firmware is obsolete - please upgrade to "
 593                                 "revision46 or higher\n",
 594                                 DRV_NAME, pci_name(dev));
 595                 ret = -EAGAIN;
 596                 goto out;
 597         }
 598         ret = sgiioc4_ide_setup_pci_device(dev);
 599 out:
 600         return ret;
 601 }
 602
 603 int ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 604 {
 605         /*
 606          * PCI-RT does not bring out IDE connection.
 607          * Do not attach to this particular IOC4.
 608          */
 609         if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
 610                 return 0;
 611
 612         return pci_init_sgiioc4(idd->idd_pdev);
 613 }
 614
 615 static struct ioc4_submodule ioc4_ide_submodule = {
 616         .is_name = "IOC4_ide",
 617         .is_owner = THIS_MODULE,
 618         .is_probe = ioc4_ide_attach_one,
 619 };
 620
 621 static int __init ioc4_ide_init(void)
 622 {
 623         return ioc4_register_submodule(&ioc4_ide_submodule);
 624 }
 625
 626 late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
 627
 628 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 629 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 630 MODULE_LICENSE("GPL");