2 * IDE ATAPI floppy driver.
4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
8 * This driver supports the following IDE floppy drives:
10 * LS-120/240 SuperDisk
12 * Iomega PC Card Clik!/PocketZip
14 * For a historical changelog see
15 * Documentation/ide/ChangeLog.ide-floppy.1996-2002
18 #include <linux/types.h>
19 #include <linux/string.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/timer.h>
24 #include <linux/interrupt.h>
25 #include <linux/major.h>
26 #include <linux/errno.h>
27 #include <linux/genhd.h>
28 #include <linux/slab.h>
29 #include <linux/cdrom.h>
30 #include <linux/ide.h>
31 #include <linux/hdreg.h>
32 #include <linux/bitops.h>
33 #include <linux/mutex.h>
34 #include <linux/scatterlist.h>
36 #include <scsi/scsi_ioctl.h>
38 #include <asm/byteorder.h>
39 #include <linux/irq.h>
40 #include <linux/uaccess.h>
42 #include <asm/unaligned.h>
44 #include "ide-floppy.h"
47 * After each failed packet command we issue a request sense command and retry
48 * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
50 #define IDEFLOPPY_MAX_PC_RETRIES 3
52 /* format capacities descriptor codes */
53 #define CAPACITY_INVALID 0x00
54 #define CAPACITY_UNFORMATTED 0x01
55 #define CAPACITY_CURRENT 0x02
56 #define CAPACITY_NO_CARTRIDGE 0x03
59 * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
60 * was apparently being deasserted before the unit was ready to receive data.
62 #define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
64 static void idefloppy_update_buffers(ide_drive_t *drive,
65 struct ide_atapi_pc *pc)
67 struct request *rq = pc->rq;
68 struct bio *bio = rq->bio;
70 while ((bio = rq->bio) != NULL)
71 ide_end_request(drive, 1, 0);
74 static int ide_floppy_callback(ide_drive_t *drive, int dsc)
76 struct ide_disk_obj *floppy = drive->driver_data;
77 struct ide_atapi_pc *pc = drive->pc;
78 struct request *rq = pc->rq;
79 int uptodate = pc->error ? 0 : 1;
81 ide_debug_log(IDE_DBG_FUNC, "enter");
83 if (drive->failed_pc == pc)
84 drive->failed_pc = NULL;
86 if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
87 (rq && blk_pc_request(rq)))
88 uptodate = 1; /* FIXME */
89 else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
93 floppy->sense_key = buf[2] & 0x0F;
94 floppy->asc = buf[12];
95 floppy->ascq = buf[13];
96 floppy->progress_indication = buf[15] & 0x80 ?
97 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
100 ide_debug_log(IDE_DBG_PC, "pc = %x",
101 drive->failed_pc->c[0]);
103 ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
104 "ascq = %x", floppy->sense_key,
105 floppy->asc, floppy->ascq);
107 printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
108 "Aborting request!\n");
111 if (blk_special_request(rq))
112 rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
117 static void ide_floppy_report_error(struct ide_disk_obj *floppy,
118 struct ide_atapi_pc *pc)
120 /* supress error messages resulting from Medium not present */
121 if (floppy->sense_key == 0x02 &&
122 floppy->asc == 0x3a &&
123 floppy->ascq == 0x00)
126 printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
127 "asc = %2x, ascq = %2x\n",
128 floppy->drive->name, pc->c[0], floppy->sense_key,
129 floppy->asc, floppy->ascq);
133 static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
134 struct ide_atapi_pc *pc)
136 struct ide_disk_obj *floppy = drive->driver_data;
138 if (drive->failed_pc == NULL &&
139 pc->c[0] != GPCMD_REQUEST_SENSE)
140 drive->failed_pc = pc;
142 /* Set the current packet command */
145 if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
146 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
147 ide_floppy_report_error(floppy, pc);
149 pc->error = IDE_DRV_ERROR_GENERAL;
151 drive->failed_pc = NULL;
152 drive->pc_callback(drive, 0);
156 ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
160 return ide_issue_pc(drive);
163 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
166 pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
172 /* A mode sense command is used to "sense" floppy parameters. */
173 void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
175 u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
178 pc->c[0] = GPCMD_MODE_SENSE_10;
180 pc->c[2] = page_code;
183 case IDEFLOPPY_CAPABILITIES_PAGE:
186 case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
190 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
192 put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
193 pc->req_xfer = length;
196 static void idefloppy_create_rw_cmd(ide_drive_t *drive,
197 struct ide_atapi_pc *pc, struct request *rq,
198 unsigned long sector)
200 struct ide_disk_obj *floppy = drive->driver_data;
201 int block = sector / floppy->bs_factor;
202 int blocks = rq->nr_sectors / floppy->bs_factor;
203 int cmd = rq_data_dir(rq);
205 ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
208 pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
209 put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
210 put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
212 memcpy(rq->cmd, pc->c, 12);
216 if (rq->cmd_flags & REQ_RW)
217 pc->flags |= PC_FLAG_WRITING;
219 pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
220 pc->flags |= PC_FLAG_DMA_OK;
223 static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
224 struct ide_atapi_pc *pc, struct request *rq)
227 memcpy(pc->c, rq->cmd, sizeof(pc->c));
230 if (rq->data_len && rq_data_dir(rq) == WRITE)
231 pc->flags |= PC_FLAG_WRITING;
234 pc->flags |= PC_FLAG_DMA_OK;
236 * possibly problematic, doesn't look like ide-floppy correctly
237 * handled scattered requests if dma fails...
239 pc->req_xfer = pc->buf_size = rq->data_len;
242 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
243 struct request *rq, sector_t block)
245 struct ide_disk_obj *floppy = drive->driver_data;
246 ide_hwif_t *hwif = drive->hwif;
247 struct ide_cmd *cmd = &hwif->cmd;
248 struct ide_atapi_pc *pc;
250 if (drive->debug_mask & IDE_DBG_RQ)
251 blk_dump_rq_flags(rq, (rq->rq_disk
252 ? rq->rq_disk->disk_name
255 if (rq->errors >= ERROR_MAX) {
256 if (drive->failed_pc) {
257 ide_floppy_report_error(floppy, drive->failed_pc);
258 drive->failed_pc = NULL;
260 printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
262 if (blk_special_request(rq)) {
263 rq->errors = IDE_DRV_ERROR_GENERAL;
264 ide_complete_rq(drive, 0);
269 if (blk_fs_request(rq)) {
270 if (((long)rq->sector % floppy->bs_factor) ||
271 (rq->nr_sectors % floppy->bs_factor)) {
272 printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
276 pc = &floppy->queued_pc;
277 idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
278 } else if (blk_special_request(rq)) {
279 pc = (struct ide_atapi_pc *) rq->buffer;
280 } else if (blk_pc_request(rq)) {
281 pc = &floppy->queued_pc;
282 idefloppy_blockpc_cmd(floppy, pc, rq);
284 blk_dump_rq_flags(rq, PFX "unsupported command in queue");
288 if (blk_fs_request(rq) || pc->req_xfer) {
289 ide_init_sg_cmd(cmd, rq->nr_sectors);
290 ide_map_sg(drive, rq);
293 pc->sg = hwif->sg_table;
294 pc->sg_cnt = cmd->sg_nents;
298 return idefloppy_issue_pc(drive, pc);
300 drive->failed_pc = NULL;
301 ide_end_request(drive, 0, 0);
306 * Look at the flexible disk page parameters. We ignore the CHS capacity
307 * parameters and use the LBA parameters instead.
309 static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
310 struct ide_atapi_pc *pc)
312 struct ide_disk_obj *floppy = drive->driver_data;
313 struct gendisk *disk = floppy->disk;
315 int capacity, lba_capacity;
316 u16 transfer_rate, sector_size, cyls, rpm;
319 ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
321 if (ide_queue_pc_tail(drive, disk, pc)) {
322 printk(KERN_ERR PFX "Can't get flexible disk page params\n");
326 if (pc->buf[3] & 0x80)
327 drive->dev_flags |= IDE_DFLAG_WP;
329 drive->dev_flags &= ~IDE_DFLAG_WP;
331 set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
335 transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
336 sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
337 cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
338 rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
339 heads = pc->buf[8 + 4];
340 sectors = pc->buf[8 + 5];
342 capacity = cyls * heads * sectors * sector_size;
344 if (memcmp(page, &floppy->flexible_disk_page, 32))
345 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
346 "%d sector size, %d rpm\n",
347 drive->name, capacity / 1024, cyls, heads,
348 sectors, transfer_rate / 8, sector_size, rpm);
350 memcpy(&floppy->flexible_disk_page, page, 32);
351 drive->bios_cyl = cyls;
352 drive->bios_head = heads;
353 drive->bios_sect = sectors;
354 lba_capacity = floppy->blocks * floppy->block_size;
356 if (capacity < lba_capacity) {
357 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
358 "bytes, but the drive only handles %d\n",
359 drive->name, lba_capacity, capacity);
360 floppy->blocks = floppy->block_size ?
361 capacity / floppy->block_size : 0;
362 drive->capacity64 = floppy->blocks * floppy->bs_factor;
369 * Determine if a media is present in the floppy drive, and if so, its LBA
372 static int ide_floppy_get_capacity(ide_drive_t *drive)
374 struct ide_disk_obj *floppy = drive->driver_data;
375 struct gendisk *disk = floppy->disk;
376 struct ide_atapi_pc pc;
378 u8 header_len, desc_cnt;
379 int i, rc = 1, blocks, length;
382 drive->bios_head = drive->bios_sect = 0;
384 floppy->bs_factor = 1;
385 drive->capacity64 = 0;
387 ide_floppy_create_read_capacity_cmd(&pc);
388 if (ide_queue_pc_tail(drive, disk, &pc)) {
389 printk(KERN_ERR PFX "Can't get floppy parameters\n");
392 header_len = pc.buf[3];
393 cap_desc = &pc.buf[4];
394 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
396 for (i = 0; i < desc_cnt; i++) {
397 unsigned int desc_start = 4 + i*8;
399 blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
400 length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
402 ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
404 i, blocks * length / 1024,
410 * the code below is valid only for the 1st descriptor, ie i=0
413 switch (pc.buf[desc_start + 4] & 0x03) {
414 /* Clik! drive returns this instead of CAPACITY_CURRENT */
415 case CAPACITY_UNFORMATTED:
416 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
418 * If it is not a clik drive, break out
419 * (maintains previous driver behaviour)
422 case CAPACITY_CURRENT:
423 /* Normal Zip/LS-120 disks */
424 if (memcmp(cap_desc, &floppy->cap_desc, 8))
425 printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
427 drive->name, blocks * length / 1024,
429 memcpy(&floppy->cap_desc, cap_desc, 8);
431 if (!length || length % 512) {
432 printk(KERN_NOTICE PFX "%s: %d bytes block size"
433 " not supported\n", drive->name, length);
435 floppy->blocks = blocks;
436 floppy->block_size = length;
437 floppy->bs_factor = length / 512;
438 if (floppy->bs_factor != 1)
439 printk(KERN_NOTICE PFX "%s: Warning: "
440 "non 512 bytes block size not "
444 floppy->blocks * floppy->bs_factor;
448 case CAPACITY_NO_CARTRIDGE:
450 * This is a KERN_ERR so it appears on screen
451 * for the user to see
453 printk(KERN_ERR PFX "%s: No disk in drive\n",
456 case CAPACITY_INVALID:
457 printk(KERN_ERR PFX "%s: Invalid capacity for disk "
458 "in drive\n", drive->name);
461 ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
462 pc.buf[desc_start + 4] & 0x03);
465 /* Clik! disk does not support get_flexible_disk_page */
466 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
467 (void) ide_floppy_get_flexible_disk_page(drive, &pc);
472 static void ide_floppy_setup(ide_drive_t *drive)
474 struct ide_disk_obj *floppy = drive->driver_data;
477 drive->pc_callback = ide_floppy_callback;
478 drive->pc_update_buffers = idefloppy_update_buffers;
479 drive->pc_io_buffers = ide_io_buffers;
482 * We used to check revisions here. At this point however I'm giving up.
483 * Just assume they are all broken, its easier.
485 * The actual reason for the workarounds was likely a driver bug after
486 * all rather than a firmware bug, and the workaround below used to hide
487 * it. It should be fixed as of version 1.9, but to be on the safe side
488 * we'll leave the limitation below for the 2.2.x tree.
490 if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
491 drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
492 /* This value will be visible in the /proc/ide/hdx/settings */
493 drive->pc_delay = IDEFLOPPY_PC_DELAY;
494 blk_queue_max_sectors(drive->queue, 64);
498 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
499 * nasty clicking noises without it, so please don't remove this.
501 if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
502 blk_queue_max_sectors(drive->queue, 64);
503 drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
504 /* IOMEGA Clik! drives do not support lock/unlock commands */
505 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
508 (void) ide_floppy_get_capacity(drive);
510 ide_proc_register_driver(drive, floppy->driver);
512 drive->dev_flags |= IDE_DFLAG_ATTACH;
515 static void ide_floppy_flush(ide_drive_t *drive)
519 static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
523 if (ide_do_test_unit_ready(drive, disk))
524 ide_do_start_stop(drive, disk, 1);
526 ret = ide_floppy_get_capacity(drive);
528 set_capacity(disk, ide_gd_capacity(drive));
533 const struct ide_disk_ops ide_atapi_disk_ops = {
534 .check = ide_check_atapi_device,
535 .get_capacity = ide_floppy_get_capacity,
536 .setup = ide_floppy_setup,
537 .flush = ide_floppy_flush,
538 .init_media = ide_floppy_init_media,
539 .set_doorlock = ide_set_media_lock,
540 .do_request = ide_floppy_do_request,
541 .ioctl = ide_floppy_ioctl,