1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
4 * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
7 * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
8 * - Reworked tuneproc, set_drive, misc mods to prep for mainline
9 * - Work was sponsored by CIS (M) Sdn Bhd.
10 * Ported to Kernel 2.6.11 on June 26, 2005 by
11 * Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
12 * Alexander Kiausch <alex.kiausch@t-online.de>
13 * Originally developed by AMD for 2.4/2.6
15 * Development of this chipset driver was funded
16 * by the nice folks at National Semiconductor/AMD.
19 * CS5535 documentation available from AMD
22 #include <linux/module.h>
23 #include <linux/pci.h>
24 #include <linux/ide.h>
26 #define DRV_NAME "cs5535"
28 #define MSR_ATAC_BASE 0x51300000
29 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
30 #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
31 #define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
32 #define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
33 #define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
34 #define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
35 #define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
36 #define ATAC_RESET (MSR_ATAC_BASE+0x10)
37 #define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
38 #define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
39 #define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
40 #define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
41 #define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
42 #define ATAC_BM0_CMD_PRIM 0x00
43 #define ATAC_BM0_STS_PRIM 0x02
44 #define ATAC_BM0_PRD 0x04
45 #define CS5535_CABLE_DETECT 0x48
47 /* Format I PIO settings. We separate out cmd and data for safer timings */
49 static unsigned int cs5535_pio_cmd_timings[5] =
50 { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
51 static unsigned int cs5535_pio_dta_timings[5] =
52 { 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
54 static unsigned int cs5535_mwdma_timings[3] =
55 { 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
57 static unsigned int cs5535_udma_timings[5] =
58 { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
60 /* Macros to check if the register is the reset value - reset value is an
61 invalid timing and indicates the register has not been set previously */
63 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
64 #define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
67 * cs5535_set_speed - Configure the chipset to the new speed
68 * @drive: Drive to set up
69 * @speed: desired speed
71 * cs5535_set_speed() configures the chipset to a new speed.
73 static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
76 u8 unit = drive->dn & 1;
78 /* Set the PIO timings */
79 if (speed < XFER_SW_DMA_0) {
80 ide_drive_t *pair = ide_get_pair_dev(drive);
83 cmd = pioa = speed - XFER_PIO_0;
86 u8 piob = pair->pio_mode - XFER_PIO_0;
92 /* Write the speed of the current drive */
93 reg = (cs5535_pio_cmd_timings[cmd] << 16) |
94 cs5535_pio_dta_timings[pioa];
95 wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
97 /* And if nessesary - change the speed of the other drive */
98 rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
100 if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
101 cs5535_pio_cmd_timings[cmd]) {
103 reg |= cs5535_pio_cmd_timings[cmd] << 16;
104 wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
107 /* Set bit 31 of the DMA register for PIO format 1 timings */
108 rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
109 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
110 reg | 0x80000000UL, 0);
112 rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
114 reg &= 0x80000000UL; /* Preserve the PIO format bit */
116 if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
117 reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
118 else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
119 reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
123 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
128 * cs5535_set_dma_mode - set host controller for DMA mode
132 * Programs the chipset for DMA mode.
135 static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
137 cs5535_set_speed(drive, drive->dma_mode);
141 * cs5535_set_pio_mode - set host controller for PIO mode
145 * A callback from the upper layers for PIO-only tuning.
148 static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
150 cs5535_set_speed(drive, drive->pio_mode);
153 static u8 cs5535_cable_detect(ide_hwif_t *hwif)
155 struct pci_dev *dev = to_pci_dev(hwif->dev);
158 /* if a 80 wire cable was detected */
159 pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
161 return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
164 static const struct ide_port_ops cs5535_port_ops = {
165 .set_pio_mode = cs5535_set_pio_mode,
166 .set_dma_mode = cs5535_set_dma_mode,
167 .cable_detect = cs5535_cable_detect,
170 static const struct ide_port_info cs5535_chipset = {
172 .port_ops = &cs5535_port_ops,
173 .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
174 .pio_mask = ATA_PIO4,
175 .mwdma_mask = ATA_MWDMA2,
176 .udma_mask = ATA_UDMA4,
179 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
181 return ide_pci_init_one(dev, &cs5535_chipset, NULL);
184 static const struct pci_device_id cs5535_pci_tbl[] = {
185 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
186 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
190 MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
192 static struct pci_driver cs5535_pci_driver = {
193 .name = "CS5535_IDE",
194 .id_table = cs5535_pci_tbl,
195 .probe = cs5535_init_one,
196 .remove = ide_pci_remove,
197 .suspend = ide_pci_suspend,
198 .resume = ide_pci_resume,
201 static int __init cs5535_ide_init(void)
203 return ide_pci_register_driver(&cs5535_pci_driver);
206 static void __exit cs5535_ide_exit(void)
208 pci_unregister_driver(&cs5535_pci_driver);
211 module_init(cs5535_ide_init);
212 module_exit(cs5535_ide_exit);
214 MODULE_AUTHOR("AMD");
215 MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
216 MODULE_LICENSE("GPL");