drivers/i2c/s3c24x0_i2c.c

   1 /*
   2  * (C) Copyright 2002
   3  * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /* This code should work for both the S3C2400 and the S3C2410
  25  * as they seem to have the same I2C controller inside.
  26  * The different address mapping is handled by the s3c24xx.h files below.
  27  */
  28
  29 #include <common.h>
  30 #include <fdtdec.h>
  31 #if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
  32 #include <asm/arch/clk.h>
  33 #include <asm/arch/cpu.h>
  34 #include <asm/arch/pinmux.h>
  35 #else
  36 #include <asm/arch/s3c24x0_cpu.h>
  37 #endif
  38 #include <asm/io.h>
  39 #include <i2c.h>
  40 #include "s3c24x0_i2c.h"
  41
  42 #ifdef CONFIG_HARD_I2C
  43
  44 #define I2C_WRITE       0
  45 #define I2C_READ        1
  46
  47 #define I2C_OK          0
  48 #define I2C_NOK         1
  49 #define I2C_NACK        2
  50 #define I2C_NOK_LA      3       /* Lost arbitration */
  51 #define I2C_NOK_TOUT    4       /* time out */
  52
  53 #define I2CSTAT_BSY     0x20    /* Busy bit */
  54 #define I2CSTAT_NACK    0x01    /* Nack bit */
  55 #define I2CCON_ACKGEN   0x80    /* Acknowledge generation */
  56 #define I2CCON_IRPND    0x10    /* Interrupt pending bit */
  57 #define I2C_MODE_MT     0xC0    /* Master Transmit Mode */
  58 #define I2C_MODE_MR     0x80    /* Master Receive Mode */
  59 #define I2C_START_STOP  0x20    /* START / STOP */
  60 #define I2C_TXRX_ENA    0x10    /* I2C Tx/Rx enable */
  61
  62 #define I2C_TIMEOUT 1           /* 1 second */
  63
  64
  65 /*
  66  * For SPL boot some boards need i2c before SDRAM is initialised so force
  67  * variables to live in SRAM
  68  */
  69 static unsigned int g_current_bus __attribute__((section(".data")));
  70 #ifdef CONFIG_OF_CONTROL
  71 static int i2c_busses __attribute__((section(".data")));
  72 static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
  73                         __attribute__((section(".data")));
  74 #endif
  75
  76 #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
  77 static int GetI2CSDA(void)
  78 {
  79         struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
  80
  81 #ifdef CONFIG_S3C2410
  82         return (readl(&gpio->gpedat) & 0x8000) >> 15;
  83 #endif
  84 #ifdef CONFIG_S3C2400
  85         return (readl(&gpio->pgdat) & 0x0020) >> 5;
  86 #endif
  87 }
  88
  89 static void SetI2CSCL(int x)
  90 {
  91         struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
  92
  93 #ifdef CONFIG_S3C2410
  94         writel((readl(&gpio->gpedat) & ~0x4000) |
  95                                         (x & 1) << 14, &gpio->gpedat);
  96 #endif
  97 #ifdef CONFIG_S3C2400
  98         writel((readl(&gpio->pgdat) & ~0x0040) | (x & 1) << 6, &gpio->pgdat);
  99 #endif
 100 }
 101 #endif
 102
 103 static int WaitForXfer(struct s3c24x0_i2c *i2c)
 104 {
 105         int i;
 106
 107         i = I2C_TIMEOUT * 10000;
 108         while (!(readl(&i2c->iiccon) & I2CCON_IRPND) && (i > 0)) {
 109                 udelay(100);
 110                 i--;
 111         }
 112
 113         return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
 114 }
 115
 116 static int IsACK(struct s3c24x0_i2c *i2c)
 117 {
 118         return !(readl(&i2c->iicstat) & I2CSTAT_NACK);
 119 }
 120
 121 static void ReadWriteByte(struct s3c24x0_i2c *i2c)
 122 {
 123         writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
 124 }
 125
 126 static struct s3c24x0_i2c *get_base_i2c(void)
 127 {
 128 #ifdef CONFIG_EXYNOS4
 129         struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
 130                                                         + (EXYNOS4_I2C_SPACING
 131                                                         * g_current_bus));
 132         return i2c;
 133 #elif defined CONFIG_EXYNOS5
 134         struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
 135                                                         + (EXYNOS5_I2C_SPACING
 136                                                         * g_current_bus));
 137         return i2c;
 138 #else
 139         return s3c24x0_get_base_i2c();
 140 #endif
 141 }
 142
 143 static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
 144 {
 145         ulong freq, pres = 16, div;
 146 #if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
 147         freq = get_i2c_clk();
 148 #else
 149         freq = get_PCLK();
 150 #endif
 151         /* calculate prescaler and divisor values */
 152         if ((freq / pres / (16 + 1)) > speed)
 153                 /* set prescaler to 512 */
 154                 pres = 512;
 155
 156         div = 0;
 157         while ((freq / pres / (div + 1)) > speed)
 158                 div++;
 159
 160         /* set prescaler, divisor according to freq, also set ACKGEN, IRQ */
 161         writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon);
 162
 163         /* init to SLAVE REVEIVE and set slaveaddr */
 164         writel(0, &i2c->iicstat);
 165         writel(slaveadd, &i2c->iicadd);
 166         /* program Master Transmit (and implicit STOP) */
 167         writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
 168 }
 169
 170 /*
 171  * MULTI BUS I2C support
 172  */
 173
 174 #ifdef CONFIG_I2C_MULTI_BUS
 175 int i2c_set_bus_num(unsigned int bus)
 176 {
 177         struct s3c24x0_i2c *i2c;
 178
 179         if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
 180                 debug("Bad bus: %d\n", bus);
 181                 return -1;
 182         }
 183
 184         g_current_bus = bus;
 185         i2c = get_base_i2c();
 186         i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 187
 188         return 0;
 189 }
 190
 191 unsigned int i2c_get_bus_num(void)
 192 {
 193         return g_current_bus;
 194 }
 195 #endif
 196
 197 void i2c_init(int speed, int slaveadd)
 198 {
 199         struct s3c24x0_i2c *i2c;
 200 #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
 201         struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 202 #endif
 203         int i;
 204
 205         /* By default i2c channel 0 is the current bus */
 206         g_current_bus = 0;
 207         i2c = get_base_i2c();
 208
 209         /* wait for some time to give previous transfer a chance to finish */
 210         i = I2C_TIMEOUT * 1000;
 211         while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) {
 212                 udelay(1000);
 213                 i--;
 214         }
 215
 216 #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
 217         if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
 218 #ifdef CONFIG_S3C2410
 219                 ulong old_gpecon = readl(&gpio->gpecon);
 220 #endif
 221 #ifdef CONFIG_S3C2400
 222                 ulong old_gpecon = readl(&gpio->pgcon);
 223 #endif
 224                 /* bus still busy probably by (most) previously interrupted
 225                    transfer */
 226
 227 #ifdef CONFIG_S3C2410
 228                 /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
 229                 writel((readl(&gpio->gpecon) & ~0xF0000000) | 0x10000000,
 230                        &gpio->gpecon);
 231 #endif
 232 #ifdef CONFIG_S3C2400
 233                 /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
 234                 writel((readl(&gpio->pgcon) & ~0x00003c00) | 0x00001000,
 235                        &gpio->pgcon);
 236 #endif
 237
 238                 /* toggle I2CSCL until bus idle */
 239                 SetI2CSCL(0);
 240                 udelay(1000);
 241                 i = 10;
 242                 while ((i > 0) && (GetI2CSDA() != 1)) {
 243                         SetI2CSCL(1);
 244                         udelay(1000);
 245                         SetI2CSCL(0);
 246                         udelay(1000);
 247                         i--;
 248                 }
 249                 SetI2CSCL(1);
 250                 udelay(1000);
 251
 252                 /* restore pin functions */
 253 #ifdef CONFIG_S3C2410
 254                 writel(old_gpecon, &gpio->gpecon);
 255 #endif
 256 #ifdef CONFIG_S3C2400
 257                 writel(old_gpecon, &gpio->pgcon);
 258 #endif
 259         }
 260 #endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */
 261         i2c_ch_init(i2c, speed, slaveadd);
 262 }
 263
 264 /*
 265  * cmd_type is 0 for write, 1 for read.
 266  *
 267  * addr_len can take any value from 0-255, it is only limited
 268  * by the char, we could make it larger if needed. If it is
 269  * 0 we skip the address write cycle.
 270  */
 271 static int i2c_transfer(struct s3c24x0_i2c *i2c,
 272                         unsigned char cmd_type,
 273                         unsigned char chip,
 274                         unsigned char addr[],
 275                         unsigned char addr_len,
 276                         unsigned char data[],
 277                         unsigned short data_len)
 278 {
 279         int i, result;
 280
 281         if (data == 0 || data_len == 0) {
 282                 /*Don't support data transfer of no length or to address 0 */
 283                 debug("i2c_transfer: bad call\n");
 284                 return I2C_NOK;
 285         }
 286
 287         /* Check I2C bus idle */
 288         i = I2C_TIMEOUT * 1000;
 289         while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) {
 290                 udelay(1000);
 291                 i--;
 292         }
 293
 294         if (readl(&i2c->iicstat) & I2CSTAT_BSY)
 295                 return I2C_NOK_TOUT;
 296
 297         writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon);
 298         result = I2C_OK;
 299
 300         switch (cmd_type) {
 301         case I2C_WRITE:
 302                 if (addr && addr_len) {
 303                         writel(chip, &i2c->iicds);
 304                         /* send START */
 305                         writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
 306                                &i2c->iicstat);
 307                         i = 0;
 308                         while ((i < addr_len) && (result == I2C_OK)) {
 309                                 result = WaitForXfer(i2c);
 310                                 writel(addr[i], &i2c->iicds);
 311                                 ReadWriteByte(i2c);
 312                                 i++;
 313                         }
 314                         i = 0;
 315                         while ((i < data_len) && (result == I2C_OK)) {
 316                                 result = WaitForXfer(i2c);
 317                                 writel(data[i], &i2c->iicds);
 318                                 ReadWriteByte(i2c);
 319                                 i++;
 320                         }
 321                 } else {
 322                         writel(chip, &i2c->iicds);
 323                         /* send START */
 324                         writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
 325                                &i2c->iicstat);
 326                         i = 0;
 327                         while ((i < data_len) && (result == I2C_OK)) {
 328                                 result = WaitForXfer(i2c);
 329                                 writel(data[i], &i2c->iicds);
 330                                 ReadWriteByte(i2c);
 331                                 i++;
 332                         }
 333                 }
 334
 335                 if (result == I2C_OK)
 336                         result = WaitForXfer(i2c);
 337
 338                 /* send STOP */
 339                 writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
 340                 ReadWriteByte(i2c);
 341                 break;
 342
 343         case I2C_READ:
 344                 if (addr && addr_len) {
 345                         writel(chip, &i2c->iicds);
 346                         /* send START */
 347                         writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
 348                                 &i2c->iicstat);
 349                         result = WaitForXfer(i2c);
 350                         if (IsACK(i2c)) {
 351                                 i = 0;
 352                                 while ((i < addr_len) && (result == I2C_OK)) {
 353                                         writel(addr[i], &i2c->iicds);
 354                                         ReadWriteByte(i2c);
 355                                         result = WaitForXfer(i2c);
 356                                         i++;
 357                                 }
 358
 359                                 writel(chip, &i2c->iicds);
 360                                 /* resend START */
 361                                 writel(I2C_MODE_MR | I2C_TXRX_ENA |
 362                                        I2C_START_STOP, &i2c->iicstat);
 363                         ReadWriteByte(i2c);
 364                         result = WaitForXfer(i2c);
 365                                 i = 0;
 366                                 while ((i < data_len) && (result == I2C_OK)) {
 367                                         /* disable ACK for final READ */
 368                                         if (i == data_len - 1)
 369                                                 writel(readl(&i2c->iiccon)
 370                                                         & ~I2CCON_ACKGEN,
 371                                                         &i2c->iiccon);
 372                                 ReadWriteByte(i2c);
 373                                 result = WaitForXfer(i2c);
 374                                         data[i] = readl(&i2c->iicds);
 375                                         i++;
 376                                 }
 377                         } else {
 378                                 result = I2C_NACK;
 379                         }
 380
 381                 } else {
 382                         writel(chip, &i2c->iicds);
 383                         /* send START */
 384                         writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
 385                                 &i2c->iicstat);
 386                         result = WaitForXfer(i2c);
 387
 388                         if (IsACK(i2c)) {
 389                                 i = 0;
 390                                 while ((i < data_len) && (result == I2C_OK)) {
 391                                         /* disable ACK for final READ */
 392                                         if (i == data_len - 1)
 393                                                 writel(readl(&i2c->iiccon) &
 394                                                         ~I2CCON_ACKGEN,
 395                                                         &i2c->iiccon);
 396                                         ReadWriteByte(i2c);
 397                                         result = WaitForXfer(i2c);
 398                                         data[i] = readl(&i2c->iicds);
 399                                         i++;
 400                                 }
 401                         } else {
 402                                 result = I2C_NACK;
 403                         }
 404                 }
 405
 406                 /* send STOP */
 407                 writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
 408                 ReadWriteByte(i2c);
 409                 break;
 410
 411         default:
 412                 debug("i2c_transfer: bad call\n");
 413                 result = I2C_NOK;
 414                 break;
 415         }
 416
 417         return result;
 418 }
 419
 420 int i2c_probe(uchar chip)
 421 {
 422         struct s3c24x0_i2c *i2c;
 423         uchar buf[1];
 424
 425         i2c = get_base_i2c();
 426         buf[0] = 0;
 427
 428         /*
 429          * What is needed is to send the chip address and verify that the
 430          * address was <ACK>ed (i.e. there was a chip at that address which
 431          * drove the data line low).
 432          */
 433         return i2c_transfer(i2c, I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
 434 }
 435
 436 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 437 {
 438         struct s3c24x0_i2c *i2c;
 439         uchar xaddr[4];
 440         int ret;
 441
 442         if (alen > 4) {
 443                 debug("I2C read: addr len %d not supported\n", alen);
 444                 return 1;
 445         }
 446
 447         if (alen > 0) {
 448                 xaddr[0] = (addr >> 24) & 0xFF;
 449                 xaddr[1] = (addr >> 16) & 0xFF;
 450                 xaddr[2] = (addr >> 8) & 0xFF;
 451                 xaddr[3] = addr & 0xFF;
 452         }
 453
 454 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 455         /*
 456          * EEPROM chips that implement "address overflow" are ones
 457          * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 458          * address and the extra bits end up in the "chip address"
 459          * bit slots. This makes a 24WC08 (1Kbyte) chip look like
 460          * four 256 byte chips.
 461          *
 462          * Note that we consider the length of the address field to
 463          * still be one byte because the extra address bits are
 464          * hidden in the chip address.
 465          */
 466         if (alen > 0)
 467                 chip |= ((addr >> (alen * 8)) &
 468                          CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 469 #endif
 470         i2c = get_base_i2c();
 471         ret = i2c_transfer(i2c, I2C_READ, chip << 1, &xaddr[4 - alen], alen,
 472                         buffer, len);
 473         if (ret != 0) {
 474                 debug("I2c read: failed %d\n", ret);
 475                 return 1;
 476         }
 477         return 0;
 478 }
 479
 480 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 481 {
 482         struct s3c24x0_i2c *i2c;
 483         uchar xaddr[4];
 484
 485         if (alen > 4) {
 486                 debug("I2C write: addr len %d not supported\n", alen);
 487                 return 1;
 488         }
 489
 490         if (alen > 0) {
 491                 xaddr[0] = (addr >> 24) & 0xFF;
 492                 xaddr[1] = (addr >> 16) & 0xFF;
 493                 xaddr[2] = (addr >> 8) & 0xFF;
 494                 xaddr[3] = addr & 0xFF;
 495         }
 496 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 497         /*
 498          * EEPROM chips that implement "address overflow" are ones
 499          * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 500          * address and the extra bits end up in the "chip address"
 501          * bit slots. This makes a 24WC08 (1Kbyte) chip look like
 502          * four 256 byte chips.
 503          *
 504          * Note that we consider the length of the address field to
 505          * still be one byte because the extra address bits are
 506          * hidden in the chip address.
 507          */
 508         if (alen > 0)
 509                 chip |= ((addr >> (alen * 8)) &
 510                          CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 511 #endif
 512         i2c = get_base_i2c();
 513         return (i2c_transfer
 514                 (i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
 515                  len) != 0);
 516 }
 517
 518 #ifdef CONFIG_OF_CONTROL
 519 void board_i2c_init(const void *blob)
 520 {
 521         int node_list[CONFIG_MAX_I2C_NUM];
 522         int count, i;
 523
 524         count = fdtdec_find_aliases_for_id(blob, "i2c",
 525                 COMPAT_SAMSUNG_S3C2440_I2C, node_list,
 526                 CONFIG_MAX_I2C_NUM);
 527
 528         for (i = 0; i < count; i++) {
 529                 struct s3c24x0_i2c_bus *bus;
 530                 int node = node_list[i];
 531
 532                 if (node <= 0)
 533                         continue;
 534                 bus = &i2c_bus[i];
 535                 bus->regs = (struct s3c24x0_i2c *)
 536                         fdtdec_get_addr(blob, node, "reg");
 537                 bus->id = pinmux_decode_periph_id(blob, node);
 538                 bus->node = node;
 539                 bus->bus_num = i2c_busses++;
 540                 exynos_pinmux_config(bus->id, 0);
 541         }
 542 }
 543
 544 static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
 545 {
 546         if (bus_idx < i2c_busses)
 547                 return &i2c_bus[bus_idx];
 548
 549         debug("Undefined bus: %d\n", bus_idx);
 550         return NULL;
 551 }
 552
 553 int i2c_get_bus_num_fdt(int node)
 554 {
 555         int i;
 556
 557         for (i = 0; i < i2c_busses; i++) {
 558                 if (node == i2c_bus[i].node)
 559                         return i;
 560         }
 561
 562         debug("%s: Can't find any matched I2C bus\n", __func__);
 563         return -1;
 564 }
 565
 566 int i2c_reset_port_fdt(const void *blob, int node)
 567 {
 568         struct s3c24x0_i2c_bus *i2c;
 569         int bus;
 570
 571         bus = i2c_get_bus_num_fdt(node);
 572         if (bus < 0) {
 573                 debug("could not get bus for node %d\n", node);
 574                 return -1;
 575         }
 576
 577         i2c = get_bus(bus);
 578         if (!i2c) {
 579                 debug("get_bus() failed for node node %d\n", node);
 580                 return -1;
 581         }
 582
 583         i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 584
 585         return 0;
 586 }
 587 #endif
 588
 589 #endif /* CONFIG_HARD_I2C */