1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com>
11 #define I2C_TIMEOUT_MS 100
13 /* Control register fields */
14 #define REG_CTRL_START BIT(0)
15 #define REG_CTRL_ACK_IGNORE BIT(1)
16 #define REG_CTRL_STATUS BIT(2)
17 #define REG_CTRL_ERROR BIT(3)
18 #define REG_CTRL_CLKDIV_SHIFT 12
19 #define REG_CTRL_CLKDIV_MASK GENMASK(21, 12)
20 #define REG_CTRL_CLKDIVEXT_SHIFT 28
21 #define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, 28)
26 TOKEN_SLAVE_ADDR_WRITE,
27 TOKEN_SLAVE_ADDR_READ,
44 struct meson_i2c_data {
45 unsigned char div_factor;
49 const struct meson_i2c_data *data;
51 struct i2c_regs *regs;
52 struct i2c_msg *msg; /* Current I2C message */
53 bool last; /* Whether the message is the last */
54 uint count; /* Number of bytes in the current transfer */
55 uint pos; /* Position of current transfer in message */
56 u32 tokens[2]; /* Sequence of tokens to be written */
57 uint num_tokens; /* Number of tokens to be written */
60 static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
67 static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
69 if (i2c->num_tokens < 8)
70 i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4);
72 i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4);
78 * Retrieve data for the current transfer (which can be at most 8
79 * bytes) from the device internal buffer.
81 static void meson_i2c_get_data(struct meson_i2c *i2c, u8 *buf, int len)
86 rdata0 = readl(&i2c->regs->tok_rdata0);
87 rdata1 = readl(&i2c->regs->tok_rdata1);
89 debug("meson i2c: read data %08x %08x len %d\n", rdata0, rdata1, len);
91 for (i = 0; i < min(4, len); i++)
92 *buf++ = (rdata0 >> i * 8) & 0xff;
94 for (i = 4; i < min(8, len); i++)
95 *buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
99 * Write data for the current transfer (which can be at most 8 bytes)
100 * to the device internal buffer.
102 static void meson_i2c_put_data(struct meson_i2c *i2c, u8 *buf, int len)
104 u32 wdata0 = 0, wdata1 = 0;
107 for (i = 0; i < min(4, len); i++)
108 wdata0 |= *buf++ << (i * 8);
110 for (i = 4; i < min(8, len); i++)
111 wdata1 |= *buf++ << ((i - 4) * 8);
113 writel(wdata0, &i2c->regs->tok_wdata0);
114 writel(wdata1, &i2c->regs->tok_wdata1);
116 debug("meson i2c: write data %08x %08x len %d\n", wdata0, wdata1, len);
120 * Prepare the next transfer: pick the next 8 bytes in the remaining
121 * part of message and write tokens and data (if needed) to the
124 static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
126 bool write = !(i2c->msg->flags & I2C_M_RD);
129 i2c->count = min(i2c->msg->len - i2c->pos, 8u);
131 for (i = 0; i + 1 < i2c->count; i++)
132 meson_i2c_add_token(i2c, TOKEN_DATA);
135 if (write || i2c->pos + i2c->count < i2c->msg->len)
136 meson_i2c_add_token(i2c, TOKEN_DATA);
138 meson_i2c_add_token(i2c, TOKEN_DATA_LAST);
142 meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
144 if (i2c->last && i2c->pos + i2c->count >= i2c->msg->len)
145 meson_i2c_add_token(i2c, TOKEN_STOP);
147 writel(i2c->tokens[0], &i2c->regs->tok_list0);
148 writel(i2c->tokens[1], &i2c->regs->tok_list1);
151 static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
155 token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ :
156 TOKEN_SLAVE_ADDR_WRITE;
158 writel(msg->addr << 1, &i2c->regs->slave_addr);
159 meson_i2c_add_token(i2c, TOKEN_START);
160 meson_i2c_add_token(i2c, token);
163 static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
168 debug("meson i2c: %s addr %u len %u\n",
169 (msg->flags & I2C_M_RD) ? "read" : "write",
170 msg->addr, msg->len);
177 meson_i2c_reset_tokens(i2c);
178 meson_i2c_do_start(i2c, msg);
181 meson_i2c_prepare_xfer(i2c);
183 /* start the transfer */
184 setbits_le32(&i2c->regs->ctrl, REG_CTRL_START);
185 start = get_timer(0);
186 while (readl(&i2c->regs->ctrl) & REG_CTRL_STATUS) {
187 if (get_timer(start) > I2C_TIMEOUT_MS) {
188 clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START);
189 debug("meson i2c: timeout\n");
194 meson_i2c_reset_tokens(i2c);
195 clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START);
197 if (readl(&i2c->regs->ctrl) & REG_CTRL_ERROR) {
198 debug("meson i2c: error\n");
202 if ((msg->flags & I2C_M_RD) && i2c->count) {
203 meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos,
206 i2c->pos += i2c->count;
207 } while (i2c->pos < msg->len);
212 static int meson_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
215 struct meson_i2c *i2c = dev_get_priv(bus);
218 for (i = 0; i < nmsgs; i++) {
219 ret = meson_i2c_xfer_msg(i2c, msg + i, i == nmsgs - 1);
227 static int meson_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
229 struct meson_i2c *i2c = dev_get_priv(bus);
233 clk_rate = clk_get_rate(&i2c->clk);
234 if (IS_ERR_VALUE(clk_rate))
237 div = DIV_ROUND_UP(clk_rate, speed * i2c->data->div_factor);
239 /* clock divider has 12 bits */
240 if (div >= (1 << 12)) {
241 debug("meson i2c: requested bus frequency too low\n");
245 clrsetbits_le32(&i2c->regs->ctrl, REG_CTRL_CLKDIV_MASK,
246 (div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT);
248 clrsetbits_le32(&i2c->regs->ctrl, REG_CTRL_CLKDIVEXT_MASK,
249 (div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
251 debug("meson i2c: set clk %u, src %lu, div %u\n", speed, clk_rate, div);
256 static int meson_i2c_probe(struct udevice *bus)
258 struct meson_i2c *i2c = dev_get_priv(bus);
261 i2c->data = (const struct meson_i2c_data *)dev_get_driver_data(bus);
263 ret = clk_get_by_index(bus, 0, &i2c->clk);
267 ret = clk_enable(&i2c->clk);
271 i2c->regs = dev_read_addr_ptr(bus);
272 clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START);
277 static const struct dm_i2c_ops meson_i2c_ops = {
278 .xfer = meson_i2c_xfer,
279 .set_bus_speed = meson_i2c_set_bus_speed,
282 static const struct meson_i2c_data i2c_meson6_data = {
286 static const struct meson_i2c_data i2c_gxbb_data = {
290 static const struct meson_i2c_data i2c_axg_data = {
294 static const struct udevice_id meson_i2c_ids[] = {
295 {.compatible = "amlogic,meson6-i2c", .data = (ulong)&i2c_meson6_data},
296 {.compatible = "amlogic,meson-gx-i2c", .data = (ulong)&i2c_gxbb_data},
297 {.compatible = "amlogic,meson-gxbb-i2c", .data = (ulong)&i2c_gxbb_data},
298 {.compatible = "amlogic,meson-axg-i2c", .data = (ulong)&i2c_axg_data},
302 U_BOOT_DRIVER(i2c_meson) = {
305 .of_match = meson_i2c_ids,
306 .probe = meson_i2c_probe,
307 .priv_auto_alloc_size = sizeof(struct meson_i2c),
308 .ops = &meson_i2c_ops,