3 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
5 * SPDX-License-Identifier: GPL-2.0+
12 u32 ic_con; /* 0x00 */
13 u32 ic_tar; /* 0x04 */
14 u32 ic_sar; /* 0x08 */
15 u32 ic_hs_maddr; /* 0x0c */
16 u32 ic_cmd_data; /* 0x10 */
17 u32 ic_ss_scl_hcnt; /* 0x14 */
18 u32 ic_ss_scl_lcnt; /* 0x18 */
19 u32 ic_fs_scl_hcnt; /* 0x1c */
20 u32 ic_fs_scl_lcnt; /* 0x20 */
21 u32 ic_hs_scl_hcnt; /* 0x24 */
22 u32 ic_hs_scl_lcnt; /* 0x28 */
23 u32 ic_intr_stat; /* 0x2c */
24 u32 ic_intr_mask; /* 0x30 */
25 u32 ic_raw_intr_stat; /* 0x34 */
26 u32 ic_rx_tl; /* 0x38 */
27 u32 ic_tx_tl; /* 0x3c */
28 u32 ic_clr_intr; /* 0x40 */
29 u32 ic_clr_rx_under; /* 0x44 */
30 u32 ic_clr_rx_over; /* 0x48 */
31 u32 ic_clr_tx_over; /* 0x4c */
32 u32 ic_clr_rd_req; /* 0x50 */
33 u32 ic_clr_tx_abrt; /* 0x54 */
34 u32 ic_clr_rx_done; /* 0x58 */
35 u32 ic_clr_activity; /* 0x5c */
36 u32 ic_clr_stop_det; /* 0x60 */
37 u32 ic_clr_start_det; /* 0x64 */
38 u32 ic_clr_gen_call; /* 0x68 */
39 u32 ic_enable; /* 0x6c */
40 u32 ic_status; /* 0x70 */
41 u32 ic_txflr; /* 0x74 */
42 u32 ic_rxflr; /* 0x78 */
43 u32 ic_sda_hold; /* 0x7c */
44 u32 ic_tx_abrt_source; /* 0x80 */
45 u8 res1[0x18]; /* 0x84 */
46 u32 ic_enable_status; /* 0x9c */
52 #define NANO_TO_MICRO 1000
54 /* High and low times in different speed modes (in ns) */
55 #define MIN_SS_SCL_HIGHTIME 4000
56 #define MIN_SS_SCL_LOWTIME 4700
57 #define MIN_FS_SCL_HIGHTIME 600
58 #define MIN_FS_SCL_LOWTIME 1300
59 #define MIN_HS_SCL_HIGHTIME 60
60 #define MIN_HS_SCL_LOWTIME 160
62 /* Worst case timeout for 1 byte is kept as 2ms */
63 #define I2C_BYTE_TO (CONFIG_SYS_HZ/500)
64 #define I2C_STOPDET_TO (CONFIG_SYS_HZ/500)
65 #define I2C_BYTE_TO_BB (I2C_BYTE_TO * 16)
67 /* i2c control register definitions */
68 #define IC_CON_SD 0x0040
69 #define IC_CON_RE 0x0020
70 #define IC_CON_10BITADDRMASTER 0x0010
71 #define IC_CON_10BITADDR_SLAVE 0x0008
72 #define IC_CON_SPD_MSK 0x0006
73 #define IC_CON_SPD_SS 0x0002
74 #define IC_CON_SPD_FS 0x0004
75 #define IC_CON_SPD_HS 0x0006
76 #define IC_CON_MM 0x0001
78 /* i2c target address register definitions */
79 #define TAR_ADDR 0x0050
81 /* i2c slave address register definitions */
82 #define IC_SLAVE_ADDR 0x0002
84 /* i2c data buffer and command register definitions */
86 #define IC_STOP 0x0200
88 /* i2c interrupt status register definitions */
89 #define IC_GEN_CALL 0x0800
90 #define IC_START_DET 0x0400
91 #define IC_STOP_DET 0x0200
92 #define IC_ACTIVITY 0x0100
93 #define IC_RX_DONE 0x0080
94 #define IC_TX_ABRT 0x0040
95 #define IC_RD_REQ 0x0020
96 #define IC_TX_EMPTY 0x0010
97 #define IC_TX_OVER 0x0008
98 #define IC_RX_FULL 0x0004
99 #define IC_RX_OVER 0x0002
100 #define IC_RX_UNDER 0x0001
102 /* fifo threshold register definitions */
111 #define IC_RX_TL IC_TL0
112 #define IC_TX_TL IC_TL0
114 /* i2c enable register definitions */
115 #define IC_ENABLE_0B 0x0001
117 /* i2c status register definitions */
118 #define IC_STATUS_SA 0x0040
119 #define IC_STATUS_MA 0x0020
120 #define IC_STATUS_RFF 0x0010
121 #define IC_STATUS_RFNE 0x0008
122 #define IC_STATUS_TFE 0x0004
123 #define IC_STATUS_TFNF 0x0002
124 #define IC_STATUS_ACT 0x0001
126 /* Speed Selection */
127 #define IC_SPEED_MODE_STANDARD 1
128 #define IC_SPEED_MODE_FAST 2
129 #define IC_SPEED_MODE_MAX 3
131 #define I2C_MAX_SPEED 3400000
132 #define I2C_FAST_SPEED 400000
133 #define I2C_STANDARD_SPEED 100000
135 #endif /* __DW_I2C_H_ */