drivers/i2c/busses/i2c-s3c2410.c

   1 /* linux/drivers/i2c/busses/i2c-s3c2410.c
   2  *
   3  * Copyright (C) 2004,2005,2009 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2410 I2C Controller
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25
  26 #include <linux/i2c.h>
  27 #include <linux/init.h>
  28 #include <linux/time.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/delay.h>
  31 #include <linux/errno.h>
  32 #include <linux/err.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/pm_runtime.h>
  35 #include <linux/clk.h>
  36 #include <linux/cpufreq.h>
  37 #include <linux/slab.h>
  38 #include <linux/io.h>
  39 #include <linux/of.h>
  40 #include <linux/of_gpio.h>
  41 #include <linux/pinctrl/consumer.h>
  42
  43 #include <asm/irq.h>
  44
  45 #include <linux/platform_data/i2c-s3c2410.h>
  46
  47 /* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
  48
  49 #define S3C2410_IICCON                  0x00
  50 #define S3C2410_IICSTAT                 0x04
  51 #define S3C2410_IICADD                  0x08
  52 #define S3C2410_IICDS                   0x0C
  53 #define S3C2440_IICLC                   0x10
  54
  55 #define S3C2410_IICCON_ACKEN            (1 << 7)
  56 #define S3C2410_IICCON_TXDIV_16         (0 << 6)
  57 #define S3C2410_IICCON_TXDIV_512        (1 << 6)
  58 #define S3C2410_IICCON_IRQEN            (1 << 5)
  59 #define S3C2410_IICCON_IRQPEND          (1 << 4)
  60 #define S3C2410_IICCON_SCALE(x)         ((x) & 0xf)
  61 #define S3C2410_IICCON_SCALEMASK        (0xf)
  62
  63 #define S3C2410_IICSTAT_MASTER_RX       (2 << 6)
  64 #define S3C2410_IICSTAT_MASTER_TX       (3 << 6)
  65 #define S3C2410_IICSTAT_SLAVE_RX        (0 << 6)
  66 #define S3C2410_IICSTAT_SLAVE_TX        (1 << 6)
  67 #define S3C2410_IICSTAT_MODEMASK        (3 << 6)
  68
  69 #define S3C2410_IICSTAT_START           (1 << 5)
  70 #define S3C2410_IICSTAT_BUSBUSY         (1 << 5)
  71 #define S3C2410_IICSTAT_TXRXEN          (1 << 4)
  72 #define S3C2410_IICSTAT_ARBITR          (1 << 3)
  73 #define S3C2410_IICSTAT_ASSLAVE         (1 << 2)
  74 #define S3C2410_IICSTAT_ADDR0           (1 << 1)
  75 #define S3C2410_IICSTAT_LASTBIT         (1 << 0)
  76
  77 #define S3C2410_IICLC_SDA_DELAY0        (0 << 0)
  78 #define S3C2410_IICLC_SDA_DELAY5        (1 << 0)
  79 #define S3C2410_IICLC_SDA_DELAY10       (2 << 0)
  80 #define S3C2410_IICLC_SDA_DELAY15       (3 << 0)
  81 #define S3C2410_IICLC_SDA_DELAY_MASK    (3 << 0)
  82
  83 #define S3C2410_IICLC_FILTER_ON         (1 << 2)
  84
  85 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
  86 #define QUIRK_S3C2440           (1 << 0)
  87 #define QUIRK_HDMIPHY           (1 << 1)
  88 #define QUIRK_NO_GPIO           (1 << 2)
  89 #define QUIRK_POLL              (1 << 3)
  90
  91 /* Max time to wait for bus to become idle after a xfer (in us) */
  92 #define S3C2410_IDLE_TIMEOUT    5000
  93
  94 /* i2c controller state */
  95 enum s3c24xx_i2c_state {
  96         STATE_IDLE,
  97         STATE_START,
  98         STATE_READ,
  99         STATE_WRITE,
 100         STATE_STOP
 101 };
 102
 103 struct s3c24xx_i2c {
 104         wait_queue_head_t       wait;
 105         kernel_ulong_t          quirks;
 106         unsigned int            suspended:1;
 107
 108         struct i2c_msg          *msg;
 109         unsigned int            msg_num;
 110         unsigned int            msg_idx;
 111         unsigned int            msg_ptr;
 112
 113         unsigned int            tx_setup;
 114         unsigned int            irq;
 115
 116         enum s3c24xx_i2c_state  state;
 117         unsigned long           clkrate;
 118
 119         void __iomem            *regs;
 120         struct clk              *clk;
 121         struct device           *dev;
 122         struct i2c_adapter      adap;
 123
 124         struct s3c2410_platform_i2c     *pdata;
 125         int                     gpios[2];
 126         struct pinctrl          *pctrl;
 127 #if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
 128         struct notifier_block   freq_transition;
 129 #endif
 130 };
 131
 132 static struct platform_device_id s3c24xx_driver_ids[] = {
 133         {
 134                 .name           = "s3c2410-i2c",
 135                 .driver_data    = 0,
 136         }, {
 137                 .name           = "s3c2440-i2c",
 138                 .driver_data    = QUIRK_S3C2440,
 139         }, {
 140                 .name           = "s3c2440-hdmiphy-i2c",
 141                 .driver_data    = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
 142         }, { },
 143 };
 144 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 145
 146 static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
 147
 148 #ifdef CONFIG_OF
 149 static const struct of_device_id s3c24xx_i2c_match[] = {
 150         { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
 151         { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
 152         { .compatible = "samsung,s3c2440-hdmiphy-i2c",
 153           .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
 154         { .compatible = "samsung,exynos5440-i2c",
 155           .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
 156         { .compatible = "samsung,exynos5-sata-phy-i2c",
 157           .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
 158         {},
 159 };
 160 MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
 161 #endif
 162
 163 /* s3c24xx_get_device_quirks
 164  *
 165  * Get controller type either from device tree or platform device variant.
 166 */
 167
 168 static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
 169 {
 170         if (pdev->dev.of_node) {
 171                 const struct of_device_id *match;
 172                 match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
 173                 return (kernel_ulong_t)match->data;
 174         }
 175
 176         return platform_get_device_id(pdev)->driver_data;
 177 }
 178
 179 /* s3c24xx_i2c_master_complete
 180  *
 181  * complete the message and wake up the caller, using the given return code,
 182  * or zero to mean ok.
 183 */
 184
 185 static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 186 {
 187         dev_dbg(i2c->dev, "master_complete %d\n", ret);
 188
 189         i2c->msg_ptr = 0;
 190         i2c->msg = NULL;
 191         i2c->msg_idx++;
 192         i2c->msg_num = 0;
 193         if (ret)
 194                 i2c->msg_idx = ret;
 195
 196         if (!(i2c->quirks & QUIRK_POLL))
 197                 wake_up(&i2c->wait);
 198 }
 199
 200 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
 201 {
 202         unsigned long tmp;
 203
 204         tmp = readl(i2c->regs + S3C2410_IICCON);
 205         writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 206 }
 207
 208 static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
 209 {
 210         unsigned long tmp;
 211
 212         tmp = readl(i2c->regs + S3C2410_IICCON);
 213         writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 214 }
 215
 216 /* irq enable/disable functions */
 217
 218 static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
 219 {
 220         unsigned long tmp;
 221
 222         tmp = readl(i2c->regs + S3C2410_IICCON);
 223         writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 224 }
 225
 226 static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 227 {
 228         unsigned long tmp;
 229
 230         tmp = readl(i2c->regs + S3C2410_IICCON);
 231         writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 232 }
 233
 234 static bool is_ack(struct s3c24xx_i2c *i2c)
 235 {
 236         int tries;
 237
 238         for (tries = 50; tries; --tries) {
 239                 if (readl(i2c->regs + S3C2410_IICCON)
 240                         & S3C2410_IICCON_IRQPEND) {
 241                         if (!(readl(i2c->regs + S3C2410_IICSTAT)
 242                                 & S3C2410_IICSTAT_LASTBIT))
 243                                 return true;
 244                 }
 245                 usleep_range(1000, 2000);
 246         }
 247         dev_err(i2c->dev, "ack was not recieved\n");
 248         return false;
 249 }
 250
 251 /* s3c24xx_i2c_message_start
 252  *
 253  * put the start of a message onto the bus
 254 */
 255
 256 static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 257                                       struct i2c_msg *msg)
 258 {
 259         unsigned int addr = (msg->addr & 0x7f) << 1;
 260         unsigned long stat;
 261         unsigned long iiccon;
 262
 263         stat = 0;
 264         stat |=  S3C2410_IICSTAT_TXRXEN;
 265
 266         if (msg->flags & I2C_M_RD) {
 267                 stat |= S3C2410_IICSTAT_MASTER_RX;
 268                 addr |= 1;
 269         } else
 270                 stat |= S3C2410_IICSTAT_MASTER_TX;
 271
 272         if (msg->flags & I2C_M_REV_DIR_ADDR)
 273                 addr ^= 1;
 274
 275         /* todo - check for whether ack wanted or not */
 276         s3c24xx_i2c_enable_ack(i2c);
 277
 278         iiccon = readl(i2c->regs + S3C2410_IICCON);
 279         writel(stat, i2c->regs + S3C2410_IICSTAT);
 280
 281         dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
 282         writeb(addr, i2c->regs + S3C2410_IICDS);
 283
 284         /* delay here to ensure the data byte has gotten onto the bus
 285          * before the transaction is started */
 286
 287         ndelay(i2c->tx_setup);
 288
 289         dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
 290         writel(iiccon, i2c->regs + S3C2410_IICCON);
 291
 292         stat |= S3C2410_IICSTAT_START;
 293         writel(stat, i2c->regs + S3C2410_IICSTAT);
 294
 295         if (i2c->quirks & QUIRK_POLL) {
 296                 while ((i2c->msg_num != 0) && is_ack(i2c)) {
 297                         i2c_s3c_irq_nextbyte(i2c, stat);
 298                         stat = readl(i2c->regs + S3C2410_IICSTAT);
 299
 300                         if (stat & S3C2410_IICSTAT_ARBITR)
 301                                 dev_err(i2c->dev, "deal with arbitration loss\n");
 302                 }
 303         }
 304 }
 305
 306 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
 307 {
 308         unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 309
 310         dev_dbg(i2c->dev, "STOP\n");
 311
 312         /*
 313          * The datasheet says that the STOP sequence should be:
 314          *  1) I2CSTAT.5 = 0    - Clear BUSY (or 'generate STOP')
 315          *  2) I2CCON.4 = 0     - Clear IRQPEND
 316          *  3) Wait until the stop condition takes effect.
 317          *  4*) I2CSTAT.4 = 0   - Clear TXRXEN
 318          *
 319          * Where, step "4*" is only for buses with the "HDMIPHY" quirk.
 320          *
 321          * However, after much experimentation, it appears that:
 322          * a) normal buses automatically clear BUSY and transition from
 323          *    Master->Slave when they complete generating a STOP condition.
 324          *    Therefore, step (3) can be done in doxfer() by polling I2CCON.4
 325          *    after starting the STOP generation here.
 326          * b) HDMIPHY bus does neither, so there is no way to do step 3.
 327          *    There is no indication when this bus has finished generating
 328          *    STOP.
 329          *
 330          * In fact, we have found that as soon as the IRQPEND bit is cleared in
 331          * step 2, the HDMIPHY bus generates the STOP condition, and then
 332          * immediately starts transferring another data byte, even though the
 333          * bus is supposedly stopped.  This is presumably because the bus is
 334          * still in "Master" mode, and its BUSY bit is still set.
 335          *
 336          * To avoid these extra post-STOP transactions on HDMI phy devices, we
 337          * just disable Serial Output on the bus (I2CSTAT.4 = 0) directly,
 338          * instead of first generating a proper STOP condition.  This should
 339          * float SDA & SCK terminating the transfer.  Subsequent transfers
 340          *  start with a proper START condition, and proceed normally.
 341          *
 342          * The HDMIPHY bus is an internal bus that always has exactly two
 343          * devices, the host as Master and the HDMIPHY device as the slave.
 344          * Skipping the STOP condition has been tested on this bus and works.
 345          */
 346         if (i2c->quirks & QUIRK_HDMIPHY) {
 347                 /* Stop driving the I2C pins */
 348                 iicstat &= ~S3C2410_IICSTAT_TXRXEN;
 349         } else {
 350                 /* stop the transfer */
 351                 iicstat &= ~S3C2410_IICSTAT_START;
 352         }
 353         writel(iicstat, i2c->regs + S3C2410_IICSTAT);
 354
 355         i2c->state = STATE_STOP;
 356
 357         s3c24xx_i2c_master_complete(i2c, ret);
 358         s3c24xx_i2c_disable_irq(i2c);
 359 }
 360
 361 /* helper functions to determine the current state in the set of
 362  * messages we are sending */
 363
 364 /* is_lastmsg()
 365  *
 366  * returns TRUE if the current message is the last in the set
 367 */
 368
 369 static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
 370 {
 371         return i2c->msg_idx >= (i2c->msg_num - 1);
 372 }
 373
 374 /* is_msglast
 375  *
 376  * returns TRUE if we this is the last byte in the current message
 377 */
 378
 379 static inline int is_msglast(struct s3c24xx_i2c *i2c)
 380 {
 381         /* msg->len is always 1 for the first byte of smbus block read.
 382          * Actual length will be read from slave. More bytes will be
 383          * read according to the length then. */
 384         if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
 385                 return 0;
 386
 387         return i2c->msg_ptr == i2c->msg->len-1;
 388 }
 389
 390 /* is_msgend
 391  *
 392  * returns TRUE if we reached the end of the current message
 393 */
 394
 395 static inline int is_msgend(struct s3c24xx_i2c *i2c)
 396 {
 397         return i2c->msg_ptr >= i2c->msg->len;
 398 }
 399
 400 /* i2c_s3c_irq_nextbyte
 401  *
 402  * process an interrupt and work out what to do
 403  */
 404
 405 static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 406 {
 407         unsigned long tmp;
 408         unsigned char byte;
 409         int ret = 0;
 410
 411         switch (i2c->state) {
 412
 413         case STATE_IDLE:
 414                 dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
 415                 goto out;
 416
 417         case STATE_STOP:
 418                 dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
 419                 s3c24xx_i2c_disable_irq(i2c);
 420                 goto out_ack;
 421
 422         case STATE_START:
 423                 /* last thing we did was send a start condition on the
 424                  * bus, or started a new i2c message
 425                  */
 426
 427                 if (iicstat & S3C2410_IICSTAT_LASTBIT &&
 428                     !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 429                         /* ack was not received... */
 430
 431                         dev_dbg(i2c->dev, "ack was not received\n");
 432                         s3c24xx_i2c_stop(i2c, -ENXIO);
 433                         goto out_ack;
 434                 }
 435
 436                 if (i2c->msg->flags & I2C_M_RD)
 437                         i2c->state = STATE_READ;
 438                 else
 439                         i2c->state = STATE_WRITE;
 440
 441                 /* terminate the transfer if there is nothing to do
 442                  * as this is used by the i2c probe to find devices. */
 443
 444                 if (is_lastmsg(i2c) && i2c->msg->len == 0) {
 445                         s3c24xx_i2c_stop(i2c, 0);
 446                         goto out_ack;
 447                 }
 448
 449                 if (i2c->state == STATE_READ)
 450                         goto prepare_read;
 451
 452                 /* fall through to the write state, as we will need to
 453                  * send a byte as well */
 454
 455         case STATE_WRITE:
 456                 /* we are writing data to the device... check for the
 457                  * end of the message, and if so, work out what to do
 458                  */
 459
 460                 if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 461                         if (iicstat & S3C2410_IICSTAT_LASTBIT) {
 462                                 dev_dbg(i2c->dev, "WRITE: No Ack\n");
 463
 464                                 s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
 465                                 goto out_ack;
 466                         }
 467                 }
 468
 469  retry_write:
 470
 471                 if (!is_msgend(i2c)) {
 472                         byte = i2c->msg->buf[i2c->msg_ptr++];
 473                         writeb(byte, i2c->regs + S3C2410_IICDS);
 474
 475                         /* delay after writing the byte to allow the
 476                          * data setup time on the bus, as writing the
 477                          * data to the register causes the first bit
 478                          * to appear on SDA, and SCL will change as
 479                          * soon as the interrupt is acknowledged */
 480
 481                         ndelay(i2c->tx_setup);
 482
 483                 } else if (!is_lastmsg(i2c)) {
 484                         /* we need to go to the next i2c message */
 485
 486                         dev_dbg(i2c->dev, "WRITE: Next Message\n");
 487
 488                         i2c->msg_ptr = 0;
 489                         i2c->msg_idx++;
 490                         i2c->msg++;
 491
 492                         /* check to see if we need to do another message */
 493                         if (i2c->msg->flags & I2C_M_NOSTART) {
 494
 495                                 if (i2c->msg->flags & I2C_M_RD) {
 496                                         /* cannot do this, the controller
 497                                          * forces us to send a new START
 498                                          * when we change direction */
 499
 500                                         s3c24xx_i2c_stop(i2c, -EINVAL);
 501                                 }
 502
 503                                 goto retry_write;
 504                         } else {
 505                                 /* send the new start */
 506                                 s3c24xx_i2c_message_start(i2c, i2c->msg);
 507                                 i2c->state = STATE_START;
 508                         }
 509
 510                 } else {
 511                         /* send stop */
 512
 513                         s3c24xx_i2c_stop(i2c, 0);
 514                 }
 515                 break;
 516
 517         case STATE_READ:
 518                 /* we have a byte of data in the data register, do
 519                  * something with it, and then work out whether we are
 520                  * going to do any more read/write
 521                  */
 522
 523                 byte = readb(i2c->regs + S3C2410_IICDS);
 524                 i2c->msg->buf[i2c->msg_ptr++] = byte;
 525
 526                 /* Add actual length to read for smbus block read */
 527                 if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
 528                         i2c->msg->len += byte;
 529  prepare_read:
 530                 if (is_msglast(i2c)) {
 531                         /* last byte of buffer */
 532
 533                         if (is_lastmsg(i2c))
 534                                 s3c24xx_i2c_disable_ack(i2c);
 535
 536                 } else if (is_msgend(i2c)) {
 537                         /* ok, we've read the entire buffer, see if there
 538                          * is anything else we need to do */
 539
 540                         if (is_lastmsg(i2c)) {
 541                                 /* last message, send stop and complete */
 542                                 dev_dbg(i2c->dev, "READ: Send Stop\n");
 543
 544                                 s3c24xx_i2c_stop(i2c, 0);
 545                         } else {
 546                                 /* go to the next transfer */
 547                                 dev_dbg(i2c->dev, "READ: Next Transfer\n");
 548
 549                                 i2c->msg_ptr = 0;
 550                                 i2c->msg_idx++;
 551                                 i2c->msg++;
 552                         }
 553                 }
 554
 555                 break;
 556         }
 557
 558         /* acknowlegde the IRQ and get back on with the work */
 559
 560  out_ack:
 561         tmp = readl(i2c->regs + S3C2410_IICCON);
 562         tmp &= ~S3C2410_IICCON_IRQPEND;
 563         writel(tmp, i2c->regs + S3C2410_IICCON);
 564  out:
 565         return ret;
 566 }
 567
 568 /* s3c24xx_i2c_irq
 569  *
 570  * top level IRQ servicing routine
 571 */
 572
 573 static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 574 {
 575         struct s3c24xx_i2c *i2c = dev_id;
 576         unsigned long status;
 577         unsigned long tmp;
 578
 579         status = readl(i2c->regs + S3C2410_IICSTAT);
 580
 581         if (status & S3C2410_IICSTAT_ARBITR) {
 582                 /* deal with arbitration loss */
 583                 dev_err(i2c->dev, "deal with arbitration loss\n");
 584         }
 585
 586         if (i2c->state == STATE_IDLE) {
 587                 dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
 588
 589                 tmp = readl(i2c->regs + S3C2410_IICCON);
 590                 tmp &= ~S3C2410_IICCON_IRQPEND;
 591                 writel(tmp, i2c->regs +  S3C2410_IICCON);
 592                 goto out;
 593         }
 594
 595         /* pretty much this leaves us with the fact that we've
 596          * transmitted or received whatever byte we last sent */
 597
 598         i2c_s3c_irq_nextbyte(i2c, status);
 599
 600  out:
 601         return IRQ_HANDLED;
 602 }
 603
 604
 605 /* s3c24xx_i2c_set_master
 606  *
 607  * get the i2c bus for a master transaction
 608 */
 609
 610 static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 611 {
 612         unsigned long iicstat;
 613         int timeout = 400;
 614
 615         while (timeout-- > 0) {
 616                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 617
 618                 if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
 619                         return 0;
 620
 621                 msleep(1);
 622         }
 623
 624         return -ETIMEDOUT;
 625 }
 626
 627 /* s3c24xx_i2c_wait_idle
 628  *
 629  * wait for the i2c bus to become idle.
 630 */
 631
 632 static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
 633 {
 634         unsigned long iicstat;
 635         ktime_t start, now;
 636         unsigned long delay;
 637         int spins;
 638
 639         /* ensure the stop has been through the bus */
 640
 641         dev_dbg(i2c->dev, "waiting for bus idle\n");
 642
 643         start = now = ktime_get();
 644
 645         /*
 646          * Most of the time, the bus is already idle within a few usec of the
 647          * end of a transaction.  However, really slow i2c devices can stretch
 648          * the clock, delaying STOP generation.
 649          *
 650          * On slower SoCs this typically happens within a very small number of
 651          * instructions so busy wait briefly to avoid scheduling overhead.
 652          */
 653         spins = 3;
 654         iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 655         while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
 656                 cpu_relax();
 657                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 658         }
 659
 660         /*
 661          * If we do get an appreciable delay as a compromise between idle
 662          * detection latency for the normal, fast case, and system load in the
 663          * slow device case, use an exponential back off in the polling loop,
 664          * up to 1/10th of the total timeout, then continue to poll at a
 665          * constant rate up to the timeout.
 666          */
 667         delay = 1;
 668         while ((iicstat & S3C2410_IICSTAT_START) &&
 669                ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
 670                 usleep_range(delay, 2 * delay);
 671                 if (delay < S3C2410_IDLE_TIMEOUT / 10)
 672                         delay <<= 1;
 673                 now = ktime_get();
 674                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 675         }
 676
 677         if (iicstat & S3C2410_IICSTAT_START)
 678                 dev_warn(i2c->dev, "timeout waiting for bus idle\n");
 679 }
 680
 681 /* s3c24xx_i2c_doxfer
 682  *
 683  * this starts an i2c transfer
 684 */
 685
 686 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 687                               struct i2c_msg *msgs, int num)
 688 {
 689         unsigned long timeout;
 690         int ret;
 691
 692         if (i2c->suspended)
 693                 return -EIO;
 694
 695         ret = s3c24xx_i2c_set_master(i2c);
 696         if (ret != 0) {
 697                 dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
 698                 ret = -EAGAIN;
 699                 goto out;
 700         }
 701
 702         i2c->msg     = msgs;
 703         i2c->msg_num = num;
 704         i2c->msg_ptr = 0;
 705         i2c->msg_idx = 0;
 706         i2c->state   = STATE_START;
 707
 708         s3c24xx_i2c_enable_irq(i2c);
 709         s3c24xx_i2c_message_start(i2c, msgs);
 710
 711         if (i2c->quirks & QUIRK_POLL) {
 712                 ret = i2c->msg_idx;
 713
 714                 if (ret != num)
 715                         dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
 716
 717                 goto out;
 718         }
 719
 720         timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 721
 722         ret = i2c->msg_idx;
 723
 724         /* having these next two as dev_err() makes life very
 725          * noisy when doing an i2cdetect */
 726
 727         if (timeout == 0)
 728                 dev_dbg(i2c->dev, "timeout\n");
 729         else if (ret != num)
 730                 dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
 731
 732         /* For QUIRK_HDMIPHY, bus is already disabled */
 733         if (i2c->quirks & QUIRK_HDMIPHY)
 734                 goto out;
 735
 736         s3c24xx_i2c_wait_idle(i2c);
 737
 738  out:
 739         return ret;
 740 }
 741
 742 /* s3c24xx_i2c_xfer
 743  *
 744  * first port of call from the i2c bus code when an message needs
 745  * transferring across the i2c bus.
 746 */
 747
 748 static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 749                         struct i2c_msg *msgs, int num)
 750 {
 751         struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
 752         int retry;
 753         int ret;
 754
 755         pm_runtime_get_sync(&adap->dev);
 756         clk_prepare_enable(i2c->clk);
 757
 758         for (retry = 0; retry < adap->retries; retry++) {
 759
 760                 ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 761
 762                 if (ret != -EAGAIN) {
 763                         clk_disable_unprepare(i2c->clk);
 764                         pm_runtime_put(&adap->dev);
 765                         return ret;
 766                 }
 767
 768                 dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
 769
 770                 udelay(100);
 771         }
 772
 773         clk_disable_unprepare(i2c->clk);
 774         pm_runtime_put(&adap->dev);
 775         return -EREMOTEIO;
 776 }
 777
 778 /* declare our i2c functionality */
 779 static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
 780 {
 781         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART |
 782                 I2C_FUNC_PROTOCOL_MANGLING;
 783 }
 784
 785 /* i2c bus registration info */
 786
 787 static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
 788         .master_xfer            = s3c24xx_i2c_xfer,
 789         .functionality          = s3c24xx_i2c_func,
 790 };
 791
 792 /* s3c24xx_i2c_calcdivisor
 793  *
 794  * return the divisor settings for a given frequency
 795 */
 796
 797 static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
 798                                    unsigned int *div1, unsigned int *divs)
 799 {
 800         unsigned int calc_divs = clkin / wanted;
 801         unsigned int calc_div1;
 802
 803         if (calc_divs > (16*16))
 804                 calc_div1 = 512;
 805         else
 806                 calc_div1 = 16;
 807
 808         calc_divs += calc_div1-1;
 809         calc_divs /= calc_div1;
 810
 811         if (calc_divs == 0)
 812                 calc_divs = 1;
 813         if (calc_divs > 17)
 814                 calc_divs = 17;
 815
 816         *divs = calc_divs;
 817         *div1 = calc_div1;
 818
 819         return clkin / (calc_divs * calc_div1);
 820 }
 821
 822 /* s3c24xx_i2c_clockrate
 823  *
 824  * work out a divisor for the user requested frequency setting,
 825  * either by the requested frequency, or scanning the acceptable
 826  * range of frequencies until something is found
 827 */
 828
 829 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 830 {
 831         struct s3c2410_platform_i2c *pdata = i2c->pdata;
 832         unsigned long clkin = clk_get_rate(i2c->clk);
 833         unsigned int divs, div1;
 834         unsigned long target_frequency;
 835         u32 iiccon;
 836         int freq;
 837
 838         i2c->clkrate = clkin;
 839         clkin /= 1000;          /* clkin now in KHz */
 840
 841         dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
 842
 843         target_frequency = pdata->frequency ? pdata->frequency : 100000;
 844
 845         target_frequency /= 1000; /* Target frequency now in KHz */
 846
 847         freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
 848
 849         if (freq > target_frequency) {
 850                 dev_err(i2c->dev,
 851                         "Unable to achieve desired frequency %luKHz."   \
 852                         " Lowest achievable %dKHz\n", target_frequency, freq);
 853                 return -EINVAL;
 854         }
 855
 856         *got = freq;
 857
 858         iiccon = readl(i2c->regs + S3C2410_IICCON);
 859         iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
 860         iiccon |= (divs-1);
 861
 862         if (div1 == 512)
 863                 iiccon |= S3C2410_IICCON_TXDIV_512;
 864
 865         if (i2c->quirks & QUIRK_POLL)
 866                 iiccon |= S3C2410_IICCON_SCALE(2);
 867
 868         writel(iiccon, i2c->regs + S3C2410_IICCON);
 869
 870         if (i2c->quirks & QUIRK_S3C2440) {
 871                 unsigned long sda_delay;
 872
 873                 if (pdata->sda_delay) {
 874                         sda_delay = clkin * pdata->sda_delay;
 875                         sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
 876                         sda_delay = DIV_ROUND_UP(sda_delay, 5);
 877                         if (sda_delay > 3)
 878                                 sda_delay = 3;
 879                         sda_delay |= S3C2410_IICLC_FILTER_ON;
 880                 } else
 881                         sda_delay = 0;
 882
 883                 dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
 884                 writel(sda_delay, i2c->regs + S3C2440_IICLC);
 885         }
 886
 887         return 0;
 888 }
 889
 890 #if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
 891
 892 #define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
 893
 894 static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
 895                                           unsigned long val, void *data)
 896 {
 897         struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
 898         unsigned int got;
 899         int delta_f;
 900         int ret;
 901
 902         delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
 903
 904         /* if we're post-change and the input clock has slowed down
 905          * or at pre-change and the clock is about to speed up, then
 906          * adjust our clock rate. <0 is slow, >0 speedup.
 907          */
 908
 909         if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
 910             (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
 911                 i2c_lock_adapter(&i2c->adap);
 912                 ret = s3c24xx_i2c_clockrate(i2c, &got);
 913                 i2c_unlock_adapter(&i2c->adap);
 914
 915                 if (ret < 0)
 916                         dev_err(i2c->dev, "cannot find frequency\n");
 917                 else
 918                         dev_info(i2c->dev, "setting freq %d\n", got);
 919         }
 920
 921         return 0;
 922 }
 923
 924 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 925 {
 926         i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
 927
 928         return cpufreq_register_notifier(&i2c->freq_transition,
 929                                          CPUFREQ_TRANSITION_NOTIFIER);
 930 }
 931
 932 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 933 {
 934         cpufreq_unregister_notifier(&i2c->freq_transition,
 935                                     CPUFREQ_TRANSITION_NOTIFIER);
 936 }
 937
 938 #else
 939 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 940 {
 941         return 0;
 942 }
 943
 944 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 945 {
 946 }
 947 #endif
 948
 949 #ifdef CONFIG_OF
 950 static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 951 {
 952         int idx, gpio, ret;
 953
 954         if (i2c->quirks & QUIRK_NO_GPIO)
 955                 return 0;
 956
 957         for (idx = 0; idx < 2; idx++) {
 958                 gpio = of_get_gpio(i2c->dev->of_node, idx);
 959                 if (!gpio_is_valid(gpio)) {
 960                         dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
 961                         goto free_gpio;
 962                 }
 963                 i2c->gpios[idx] = gpio;
 964
 965                 ret = gpio_request(gpio, "i2c-bus");
 966                 if (ret) {
 967                         dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
 968                         goto free_gpio;
 969                 }
 970         }
 971         return 0;
 972
 973 free_gpio:
 974         while (--idx >= 0)
 975                 gpio_free(i2c->gpios[idx]);
 976         return -EINVAL;
 977 }
 978
 979 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 980 {
 981         unsigned int idx;
 982
 983         if (i2c->quirks & QUIRK_NO_GPIO)
 984                 return;
 985
 986         for (idx = 0; idx < 2; idx++)
 987                 gpio_free(i2c->gpios[idx]);
 988 }
 989 #else
 990 static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 991 {
 992         return 0;
 993 }
 994
 995 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 996 {
 997 }
 998 #endif
 999
1000 /* s3c24xx_i2c_init
1001  *
1002  * initialise the controller, set the IO lines and frequency
1003 */
1004
1005 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
1006 {
1007         unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
1008         struct s3c2410_platform_i2c *pdata;
1009         unsigned int freq;
1010
1011         /* get the plafrom data */
1012
1013         pdata = i2c->pdata;
1014
1015         /* write slave address */
1016
1017         writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
1018
1019         dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
1020
1021         writel(iicon, i2c->regs + S3C2410_IICCON);
1022
1023         /* we need to work out the divisors for the clock... */
1024
1025         if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
1026                 writel(0, i2c->regs + S3C2410_IICCON);
1027                 dev_err(i2c->dev, "cannot meet bus frequency required\n");
1028                 return -EINVAL;
1029         }
1030
1031         /* todo - check that the i2c lines aren't being dragged anywhere */
1032
1033         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
1034         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
1035
1036         return 0;
1037 }
1038
1039 #ifdef CONFIG_OF
1040 /* s3c24xx_i2c_parse_dt
1041  *
1042  * Parse the device tree node and retreive the platform data.
1043 */
1044
1045 static void
1046 s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
1047 {
1048         struct s3c2410_platform_i2c *pdata = i2c->pdata;
1049
1050         if (!np)
1051                 return;
1052
1053         pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
1054         of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
1055         of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
1056         of_property_read_u32(np, "samsung,i2c-max-bus-freq",
1057                                 (u32 *)&pdata->frequency);
1058 }
1059 #else
1060 static void
1061 s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
1062 {
1063         return;
1064 }
1065 #endif
1066
1067 /* s3c24xx_i2c_probe
1068  *
1069  * called by the bus driver when a suitable device is found
1070 */
1071
1072 static int s3c24xx_i2c_probe(struct platform_device *pdev)
1073 {
1074         struct s3c24xx_i2c *i2c;
1075         struct s3c2410_platform_i2c *pdata = NULL;
1076         struct resource *res;
1077         int ret;
1078
1079         if (!pdev->dev.of_node) {
1080                 pdata = dev_get_platdata(&pdev->dev);
1081                 if (!pdata) {
1082                         dev_err(&pdev->dev, "no platform data\n");
1083                         return -EINVAL;
1084                 }
1085         }
1086
1087         i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL);
1088         if (!i2c)
1089                 return -ENOMEM;
1090
1091         i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1092         if (!i2c->pdata)
1093                 return -ENOMEM;
1094
1095         i2c->quirks = s3c24xx_get_device_quirks(pdev);
1096         if (pdata)
1097                 memcpy(i2c->pdata, pdata, sizeof(*pdata));
1098         else
1099                 s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
1100
1101         strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
1102         i2c->adap.owner   = THIS_MODULE;
1103         i2c->adap.algo    = &s3c24xx_i2c_algorithm;
1104         i2c->adap.retries = 2;
1105         i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
1106         i2c->tx_setup     = 50;
1107
1108         init_waitqueue_head(&i2c->wait);
1109
1110         /* find the clock and enable it */
1111
1112         i2c->dev = &pdev->dev;
1113         i2c->clk = devm_clk_get(&pdev->dev, "i2c");
1114         if (IS_ERR(i2c->clk)) {
1115                 dev_err(&pdev->dev, "cannot get clock\n");
1116                 return -ENOENT;
1117         }
1118
1119         dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
1120
1121
1122         /* map the registers */
1123
1124         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1125         i2c->regs = devm_ioremap_resource(&pdev->dev, res);
1126
1127         if (IS_ERR(i2c->regs))
1128                 return PTR_ERR(i2c->regs);
1129
1130         dev_dbg(&pdev->dev, "registers %p (%p)\n",
1131                 i2c->regs, res);
1132
1133         /* setup info block for the i2c core */
1134
1135         i2c->adap.algo_data = i2c;
1136         i2c->adap.dev.parent = &pdev->dev;
1137
1138         i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
1139
1140         /* inititalise the i2c gpio lines */
1141
1142         if (i2c->pdata->cfg_gpio) {
1143                 i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
1144         } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
1145                 return -EINVAL;
1146         }
1147
1148         /* initialise the i2c controller */
1149
1150         clk_prepare_enable(i2c->clk);
1151         ret = s3c24xx_i2c_init(i2c);
1152         clk_disable_unprepare(i2c->clk);
1153         if (ret != 0) {
1154                 dev_err(&pdev->dev, "I2C controller init failed\n");
1155                 return ret;
1156         }
1157         /* find the IRQ for this unit (note, this relies on the init call to
1158          * ensure no current IRQs pending
1159          */
1160
1161         if (!(i2c->quirks & QUIRK_POLL)) {
1162                 i2c->irq = ret = platform_get_irq(pdev, 0);
1163                 if (ret <= 0) {
1164                         dev_err(&pdev->dev, "cannot find IRQ\n");
1165                         return ret;
1166                 }
1167
1168         ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
1169                                 dev_name(&pdev->dev), i2c);
1170
1171                 if (ret != 0) {
1172                         dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
1173                         return ret;
1174                 }
1175         }
1176
1177         ret = s3c24xx_i2c_register_cpufreq(i2c);
1178         if (ret < 0) {
1179                 dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
1180                 return ret;
1181         }
1182
1183         /* Note, previous versions of the driver used i2c_add_adapter()
1184          * to add the bus at any number. We now pass the bus number via
1185          * the platform data, so if unset it will now default to always
1186          * being bus 0.
1187          */
1188
1189         i2c->adap.nr = i2c->pdata->bus_num;
1190         i2c->adap.dev.of_node = pdev->dev.of_node;
1191
1192         ret = i2c_add_numbered_adapter(&i2c->adap);
1193         if (ret < 0) {
1194                 dev_err(&pdev->dev, "failed to add bus to i2c core\n");
1195                 s3c24xx_i2c_deregister_cpufreq(i2c);
1196                 return ret;
1197         }
1198
1199         platform_set_drvdata(pdev, i2c);
1200
1201         pm_runtime_enable(&pdev->dev);
1202         pm_runtime_enable(&i2c->adap.dev);
1203
1204         dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
1205         return 0;
1206 }
1207
1208 /* s3c24xx_i2c_remove
1209  *
1210  * called when device is removed from the bus
1211 */
1212
1213 static int s3c24xx_i2c_remove(struct platform_device *pdev)
1214 {
1215         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
1216
1217         pm_runtime_disable(&i2c->adap.dev);
1218         pm_runtime_disable(&pdev->dev);
1219
1220         s3c24xx_i2c_deregister_cpufreq(i2c);
1221
1222         i2c_del_adapter(&i2c->adap);
1223
1224         if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
1225                 s3c24xx_i2c_dt_gpio_free(i2c);
1226
1227         return 0;
1228 }
1229
1230 #ifdef CONFIG_PM_SLEEP
1231 static int s3c24xx_i2c_suspend_noirq(struct device *dev)
1232 {
1233         struct platform_device *pdev = to_platform_device(dev);
1234         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
1235
1236         i2c->suspended = 1;
1237
1238         return 0;
1239 }
1240
1241 static int s3c24xx_i2c_resume(struct device *dev)
1242 {
1243         struct platform_device *pdev = to_platform_device(dev);
1244         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
1245
1246         clk_prepare_enable(i2c->clk);
1247         s3c24xx_i2c_init(i2c);
1248         clk_disable_unprepare(i2c->clk);
1249         i2c->suspended = 0;
1250
1251         return 0;
1252 }
1253 #endif
1254
1255 #ifdef CONFIG_PM
1256 static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
1257 #ifdef CONFIG_PM_SLEEP
1258         .suspend_noirq = s3c24xx_i2c_suspend_noirq,
1259         .resume = s3c24xx_i2c_resume,
1260 #endif
1261 };
1262
1263 #define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
1264 #else
1265 #define S3C24XX_DEV_PM_OPS NULL
1266 #endif
1267
1268 /* device driver for platform bus bits */
1269
1270 static struct platform_driver s3c24xx_i2c_driver = {
1271         .probe          = s3c24xx_i2c_probe,
1272         .remove         = s3c24xx_i2c_remove,
1273         .id_table       = s3c24xx_driver_ids,
1274         .driver         = {
1275                 .owner  = THIS_MODULE,
1276                 .name   = "s3c-i2c",
1277                 .pm     = S3C24XX_DEV_PM_OPS,
1278                 .of_match_table = of_match_ptr(s3c24xx_i2c_match),
1279         },
1280 };
1281
1282 static int __init i2c_adap_s3c_init(void)
1283 {
1284         return platform_driver_register(&s3c24xx_i2c_driver);
1285 }
1286 subsys_initcall(i2c_adap_s3c_init);
1287
1288 static void __exit i2c_adap_s3c_exit(void)
1289 {
1290         platform_driver_unregister(&s3c24xx_i2c_driver);
1291 }
1292 module_exit(i2c_adap_s3c_exit);
1293
1294 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
1295 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
1296 MODULE_LICENSE("GPL");