1 /* ------------------------------------------------------------------------- */
2 /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */
3 /* ------------------------------------------------------------------------- */
4 /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
5 * <Peter dot Milne at D hyphen TACQ dot com>
7 * With acknowledgements to i2c-algo-ibm_ocp.c by
8 * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
10 * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
12 * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
14 * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
15 * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
17 * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
19 * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
20 * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
21 * - Make it work with IXP46x chips
22 * - Cleanup function names, coding style, etc
24 * - writing to slave address causes latchup on iop331.
25 * fix: driver refuses to address self.
27 * This program is free software; you can redistribute it and/or modify
28 * it under the terms of the GNU General Public License as published by
29 * the Free Software Foundation, version 2.
32 #include <linux/interrupt.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/delay.h>
36 #include <linux/slab.h>
37 #include <linux/init.h>
38 #include <linux/errno.h>
39 #include <linux/platform_device.h>
40 #include <linux/i2c.h>
42 #include <linux/gpio.h>
44 #include "i2c-iop3xx.h"
46 /* global unit counter */
49 static inline unsigned char
50 iic_cook_addr(struct i2c_msg *msg)
54 addr = (msg->addr << 1);
56 if (msg->flags & I2C_M_RD)
63 iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
65 /* Follows devman 9.3 */
66 __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
67 __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
68 __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
72 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
74 u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
77 * Every time unit enable is asserted, GPOD needs to be cleared
78 * on IOP3XX to avoid data corruption on the bus.
80 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
81 if (iop3xx_adap->id == 0) {
89 /* NB SR bits not same position as CR IE bits :-( */
90 iop3xx_adap->SR_enabled =
91 IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
92 IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
94 cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
95 IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE;
97 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
101 iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
103 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
105 cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
106 IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
108 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
112 * NB: the handler has to clear the source of the interrupt!
113 * Then it passes the SR flags of interest to BH via adap data
116 iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
118 struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
119 u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
121 if ((sr &= iop3xx_adap->SR_enabled)) {
122 __raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET);
123 iop3xx_adap->SR_received |= sr;
124 wake_up_interruptible(&iop3xx_adap->waitq);
129 /* check all error conditions, clear them , report most important */
131 iop3xx_i2c_error(u32 sr)
135 if ((sr & IOP3XX_ISR_BERRD)) {
136 if ( !rc ) rc = -I2C_ERR_BERR;
138 if ((sr & IOP3XX_ISR_ALD)) {
139 if ( !rc ) rc = -I2C_ERR_ALD;
145 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
150 spin_lock_irqsave(&iop3xx_adap->lock, flags);
151 sr = iop3xx_adap->SR_received;
152 iop3xx_adap->SR_received = 0;
153 spin_unlock_irqrestore(&iop3xx_adap->lock, flags);
159 * sleep until interrupted, then recover and analyse the SR
162 typedef int (* compare_func)(unsigned test, unsigned mask);
163 /* returns 1 on correct comparison */
166 iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
167 unsigned flags, unsigned* status,
168 compare_func compare)
176 interrupted = wait_event_interruptible_timeout (
178 (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
181 if ((rc = iop3xx_i2c_error(sr)) < 0) {
184 } else if (!interrupted) {
196 * Concrete compare_funcs
199 all_bits_clear(unsigned test, unsigned mask)
201 return (test & mask) == 0;
205 any_bits_set(unsigned test, unsigned mask)
207 return (test & mask) != 0;
211 iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
213 return iop3xx_i2c_wait_event(
215 IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
216 status, any_bits_set);
220 iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
222 return iop3xx_i2c_wait_event(
224 IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
225 status, any_bits_set);
229 iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
231 return iop3xx_i2c_wait_event(
232 iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
236 iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
239 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
243 /* avoid writing to my slave address (hangs on 80331),
244 * forbidden in Intel developer manual
246 if (msg->addr == MYSAR) {
250 __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
252 cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
253 cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
255 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
256 rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
262 iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
265 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
269 __raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET);
270 cr &= ~IOP3XX_ICR_MSTART;
272 cr |= IOP3XX_ICR_MSTOP;
274 cr &= ~IOP3XX_ICR_MSTOP;
276 cr |= IOP3XX_ICR_TBYTE;
277 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
278 rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
284 iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
287 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
291 cr &= ~IOP3XX_ICR_MSTART;
294 cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK;
296 cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
298 cr |= IOP3XX_ICR_TBYTE;
299 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
301 rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status);
303 *byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET);
309 iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
311 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
315 for (ii = 0; rc == 0 && ii != count; ++ii)
316 rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
321 iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
323 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
327 for (ii = 0; rc == 0 && ii != count; ++ii)
328 rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
334 * Description: This function implements combined transactions. Combined
335 * transactions consist of combinations of reading and writing blocks of data.
336 * FROM THE SAME ADDRESS
337 * Each transfer (i.e. a read or a write) is separated by a repeated start
341 iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
343 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
346 rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg);
351 if ((pmsg->flags&I2C_M_RD)) {
352 return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
354 return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
359 * master_xfer() - main read/write entry
362 iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
365 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
370 iop3xx_i2c_wait_idle(iop3xx_adap, &status);
371 iop3xx_i2c_reset(iop3xx_adap);
372 iop3xx_i2c_enable(iop3xx_adap);
374 for (im = 0; ret == 0 && im != num; im++) {
375 ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]);
378 iop3xx_i2c_transaction_cleanup(iop3xx_adap);
387 iop3xx_i2c_func(struct i2c_adapter *adap)
389 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
392 static const struct i2c_algorithm iop3xx_i2c_algo = {
393 .master_xfer = iop3xx_i2c_master_xfer,
394 .functionality = iop3xx_i2c_func,
398 iop3xx_i2c_remove(struct platform_device *pdev)
400 struct i2c_adapter *padapter = platform_get_drvdata(pdev);
401 struct i2c_algo_iop3xx_data *adapter_data =
402 (struct i2c_algo_iop3xx_data *)padapter->algo_data;
403 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
404 unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
407 * Disable the actual HW unit
409 cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
410 IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE);
411 __raw_writel(cr, adapter_data->ioaddr + CR_OFFSET);
413 iounmap(adapter_data->ioaddr);
414 release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
422 iop3xx_i2c_probe(struct platform_device *pdev)
424 struct resource *res;
426 struct i2c_adapter *new_adapter;
427 struct i2c_algo_iop3xx_data *adapter_data;
429 new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
435 adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
441 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
447 if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) {
452 /* set the adapter enumeration # */
453 adapter_data->id = i2c_id++;
455 adapter_data->ioaddr = ioremap(res->start, IOP3XX_I2C_IO_SIZE);
456 if (!adapter_data->ioaddr) {
461 irq = platform_get_irq(pdev, 0);
466 ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
467 pdev->name, adapter_data);
474 memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
475 new_adapter->owner = THIS_MODULE;
476 new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
477 new_adapter->dev.parent = &pdev->dev;
478 new_adapter->nr = pdev->id;
481 * Default values...should these come in from board code?
483 new_adapter->timeout = HZ;
484 new_adapter->algo = &iop3xx_i2c_algo;
486 init_waitqueue_head(&adapter_data->waitq);
487 spin_lock_init(&adapter_data->lock);
489 iop3xx_i2c_reset(adapter_data);
490 iop3xx_i2c_enable(adapter_data);
492 platform_set_drvdata(pdev, new_adapter);
493 new_adapter->algo_data = adapter_data;
495 i2c_add_numbered_adapter(new_adapter);
500 iounmap(adapter_data->ioaddr);
503 release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
516 static struct platform_driver iop3xx_i2c_driver = {
517 .probe = iop3xx_i2c_probe,
518 .remove = iop3xx_i2c_remove,
520 .owner = THIS_MODULE,
521 .name = "IOP3xx-I2C",
525 module_platform_driver(iop3xx_i2c_driver);
527 MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
528 MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
529 MODULE_LICENSE("GPL");
530 MODULE_ALIAS("platform:IOP3xx-I2C");