1 // SPDX-License-Identifier: GPL-2.0-or-later
3 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
4 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
6 Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de>
7 Copyright (C) 2010 Intel Corporation,
8 David Woodhouse <dwmw2@infradead.org>
13 * Supports the following Intel I/O Controller Hubs (ICH):
16 * region SMBus Block proc. block
17 * Chip name PCI ID size PEC buffer call read
18 * ---------------------------------------------------------------------------
19 * 82801AA (ICH) 0x2413 16 no no no no
20 * 82801AB (ICH0) 0x2423 16 no no no no
21 * 82801BA (ICH2) 0x2443 16 no no no no
22 * 82801CA (ICH3) 0x2483 32 soft no no no
23 * 82801DB (ICH4) 0x24c3 32 hard yes no no
24 * 82801E (ICH5) 0x24d3 32 hard yes yes yes
25 * 6300ESB 0x25a4 32 hard yes yes yes
26 * 82801F (ICH6) 0x266a 32 hard yes yes yes
27 * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
28 * 82801G (ICH7) 0x27da 32 hard yes yes yes
29 * 82801H (ICH8) 0x283e 32 hard yes yes yes
30 * 82801I (ICH9) 0x2930 32 hard yes yes yes
31 * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
32 * ICH10 0x3a30 32 hard yes yes yes
33 * ICH10 0x3a60 32 hard yes yes yes
34 * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
35 * 6 Series (PCH) 0x1c22 32 hard yes yes yes
36 * Patsburg (PCH) 0x1d22 32 hard yes yes yes
37 * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
38 * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
39 * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
40 * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
41 * Panther Point (PCH) 0x1e22 32 hard yes yes yes
42 * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
43 * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
44 * Avoton (SOC) 0x1f3c 32 hard yes yes yes
45 * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
46 * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
47 * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
48 * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
49 * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
50 * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
51 * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
52 * BayTrail (SOC) 0x0f12 32 hard yes yes yes
53 * Braswell (SOC) 0x2292 32 hard yes yes yes
54 * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
55 * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
56 * DNV (SOC) 0x19df 32 hard yes yes yes
57 * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
58 * Broxton (SOC) 0x5ad4 32 hard yes yes yes
59 * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
60 * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
61 * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes
62 * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes
63 * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
64 * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
65 * Cedar Fork (PCH) 0x18df 32 hard yes yes yes
66 * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes
67 * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes
68 * Comet Lake (PCH) 0x02a3 32 hard yes yes yes
69 * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes
70 * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
71 * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
72 * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes
73 * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
74 * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
75 * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes
76 * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes
77 * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes
78 * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes
79 * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes
80 * Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes
81 * Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes
83 * Features supported by this driver:
87 * Block process call transaction yes
88 * I2C block read transaction yes (doesn't use the block buffer)
90 * SMBus Host Notify yes
91 * Interrupt processing yes
93 * See the file Documentation/i2c/busses/i2c-i801.rst for details.
96 #define DRV_NAME "i801_smbus"
98 #include <linux/interrupt.h>
99 #include <linux/module.h>
100 #include <linux/pci.h>
101 #include <linux/kernel.h>
102 #include <linux/stddef.h>
103 #include <linux/delay.h>
104 #include <linux/ioport.h>
105 #include <linux/init.h>
106 #include <linux/i2c.h>
107 #include <linux/i2c-smbus.h>
108 #include <linux/acpi.h>
109 #include <linux/io.h>
110 #include <linux/dmi.h>
111 #include <linux/slab.h>
112 #include <linux/string.h>
113 #include <linux/completion.h>
114 #include <linux/err.h>
115 #include <linux/platform_device.h>
116 #include <linux/platform_data/itco_wdt.h>
117 #include <linux/platform_data/x86/p2sb.h>
118 #include <linux/pm_runtime.h>
119 #include <linux/mutex.h>
121 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
122 #include <linux/gpio/machine.h>
123 #include <linux/platform_data/i2c-mux-gpio.h>
126 /* I801 SMBus address offsets */
127 #define SMBHSTSTS(p) (0 + (p)->smba)
128 #define SMBHSTCNT(p) (2 + (p)->smba)
129 #define SMBHSTCMD(p) (3 + (p)->smba)
130 #define SMBHSTADD(p) (4 + (p)->smba)
131 #define SMBHSTDAT0(p) (5 + (p)->smba)
132 #define SMBHSTDAT1(p) (6 + (p)->smba)
133 #define SMBBLKDAT(p) (7 + (p)->smba)
134 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
135 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
136 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
137 #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */
138 #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */
139 #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */
141 /* PCI Address Constants */
143 #define SMBHSTCFG 0x040
144 #define TCOBASE 0x050
147 #define SBREG_SMBCTRL 0xc6000c
148 #define SBREG_SMBCTRL_DNV 0xcf000c
150 /* Host configuration bits for SMBHSTCFG */
151 #define SMBHSTCFG_HST_EN BIT(0)
152 #define SMBHSTCFG_SMB_SMI_EN BIT(1)
153 #define SMBHSTCFG_I2C_EN BIT(2)
154 #define SMBHSTCFG_SPD_WD BIT(4)
156 /* TCO configuration bits for TCOCTL */
157 #define TCOCTL_EN BIT(8)
159 /* Auxiliary status register bits, ICH4+ only */
160 #define SMBAUXSTS_CRCE BIT(0)
161 #define SMBAUXSTS_STCO BIT(1)
163 /* Auxiliary control register bits, ICH4+ only */
164 #define SMBAUXCTL_CRC BIT(0)
165 #define SMBAUXCTL_E32B BIT(1)
167 /* I801 command constants */
168 #define I801_QUICK 0x00
169 #define I801_BYTE 0x04
170 #define I801_BYTE_DATA 0x08
171 #define I801_WORD_DATA 0x0C
172 #define I801_PROC_CALL 0x10
173 #define I801_BLOCK_DATA 0x14
174 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
175 #define I801_BLOCK_PROC_CALL 0x1C
177 /* I801 Host Control register bits */
178 #define SMBHSTCNT_INTREN BIT(0)
179 #define SMBHSTCNT_KILL BIT(1)
180 #define SMBHSTCNT_LAST_BYTE BIT(5)
181 #define SMBHSTCNT_START BIT(6)
182 #define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */
184 /* I801 Hosts Status register bits */
185 #define SMBHSTSTS_BYTE_DONE BIT(7)
186 #define SMBHSTSTS_INUSE_STS BIT(6)
187 #define SMBHSTSTS_SMBALERT_STS BIT(5)
188 #define SMBHSTSTS_FAILED BIT(4)
189 #define SMBHSTSTS_BUS_ERR BIT(3)
190 #define SMBHSTSTS_DEV_ERR BIT(2)
191 #define SMBHSTSTS_INTR BIT(1)
192 #define SMBHSTSTS_HOST_BUSY BIT(0)
194 /* Host Notify Status register bits */
195 #define SMBSLVSTS_HST_NTFY_STS BIT(0)
197 /* Host Notify Command register bits */
198 #define SMBSLVCMD_SMBALERT_DISABLE BIT(2)
199 #define SMBSLVCMD_HST_NTFY_INTREN BIT(0)
201 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
204 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
207 /* Older devices have their ID defined in <linux/pci_ids.h> */
208 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3
209 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3
210 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
211 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
212 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
213 #define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
214 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
215 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
216 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
217 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
218 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
219 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
220 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
221 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
222 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
223 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
224 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
225 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
226 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
227 #define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3
228 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
229 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
230 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
231 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
232 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
233 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
234 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
235 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23
236 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
237 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22
238 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_PCH_S_SMBUS 0x7f23
239 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
240 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
241 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
242 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
243 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
244 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
245 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
246 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
247 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
248 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3
249 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3
250 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
251 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
252 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
253 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
254 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
255 #define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3
256 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_SOC_S_SMBUS 0xae22
258 struct i801_mux_config {
263 unsigned gpios[2]; /* Relative to gpio_chip->base */
268 struct i2c_adapter adapter;
270 unsigned char original_hstcfg;
271 unsigned char original_hstcnt;
272 unsigned char original_slvcmd;
273 struct pci_dev *pci_dev;
274 unsigned int features;
277 struct completion done;
280 /* Command state used by isr for byte-by-byte block transactions */
287 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
288 const struct i801_mux_config *mux_drvdata;
289 struct platform_device *mux_pdev;
290 struct gpiod_lookup_table *lookup;
292 struct platform_device *tco_pdev;
295 * If set to true the host controller registers are reserved for
296 * ACPI AML use. Protected by acpi_lock.
299 struct mutex acpi_lock;
302 #define FEATURE_SMBUS_PEC BIT(0)
303 #define FEATURE_BLOCK_BUFFER BIT(1)
304 #define FEATURE_BLOCK_PROC BIT(2)
305 #define FEATURE_I2C_BLOCK_READ BIT(3)
306 #define FEATURE_IRQ BIT(4)
307 #define FEATURE_HOST_NOTIFY BIT(5)
308 /* Not really a feature, but it's convenient to handle it as such */
309 #define FEATURE_IDF BIT(15)
310 #define FEATURE_TCO_SPT BIT(16)
311 #define FEATURE_TCO_CNL BIT(17)
313 static const char *i801_feature_names[] = {
316 "Block process call",
322 static unsigned int disable_features;
323 module_param(disable_features, uint, S_IRUGO | S_IWUSR);
324 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
325 "\t\t 0x01 disable SMBus PEC\n"
326 "\t\t 0x02 disable the block buffer\n"
327 "\t\t 0x08 disable the I2C block read functionality\n"
328 "\t\t 0x10 don't use interrupts\n"
329 "\t\t 0x20 disable SMBus Host Notify ");
331 /* Make sure the SMBus host is ready to start transmitting.
332 Return 0 if it is, -EBUSY if it is not. */
333 static int i801_check_pre(struct i801_priv *priv)
337 status = inb_p(SMBHSTSTS(priv));
338 if (status & SMBHSTSTS_HOST_BUSY) {
339 pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n");
343 status &= STATUS_FLAGS;
345 pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status);
346 outb_p(status, SMBHSTSTS(priv));
350 * Clear CRC status if needed.
351 * During normal operation, i801_check_post() takes care
352 * of it after every operation. We do it here only in case
353 * the hardware was already in this state when the driver
356 if (priv->features & FEATURE_SMBUS_PEC) {
357 status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
359 pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status);
360 outb_p(status, SMBAUXSTS(priv));
367 static int i801_check_post(struct i801_priv *priv, int status)
372 * If the SMBus is still busy, we give up
374 if (unlikely(status < 0)) {
375 dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
376 /* try to stop the current command */
377 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
378 outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
379 usleep_range(1000, 2000);
380 outb_p(0, SMBHSTCNT(priv));
382 /* Check if it worked */
383 status = inb_p(SMBHSTSTS(priv));
384 if ((status & SMBHSTSTS_HOST_BUSY) ||
385 !(status & SMBHSTSTS_FAILED))
386 dev_err(&priv->pci_dev->dev,
387 "Failed terminating the transaction\n");
391 if (status & SMBHSTSTS_FAILED) {
393 dev_err(&priv->pci_dev->dev, "Transaction failed\n");
395 if (status & SMBHSTSTS_DEV_ERR) {
397 * This may be a PEC error, check and clear it.
399 * AUXSTS is handled differently from HSTSTS.
400 * For HSTSTS, i801_isr() or i801_wait_intr()
401 * has already cleared the error bits in hardware,
402 * and we are passed a copy of the original value
404 * For AUXSTS, the hardware register is left
405 * for us to handle here.
406 * This is asymmetric, slightly iffy, but safe,
407 * since all this code is serialized and the CRCE
408 * bit is harmless as long as it's cleared before
409 * the next operation.
411 if ((priv->features & FEATURE_SMBUS_PEC) &&
412 (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
413 outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
415 dev_dbg(&priv->pci_dev->dev, "PEC error\n");
418 dev_dbg(&priv->pci_dev->dev, "No response\n");
421 if (status & SMBHSTSTS_BUS_ERR) {
423 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
429 /* Wait for BUSY being cleared and either INTR or an error flag being set */
430 static int i801_wait_intr(struct i801_priv *priv)
432 unsigned long timeout = jiffies + priv->adapter.timeout;
436 usleep_range(250, 500);
437 status = inb_p(SMBHSTSTS(priv));
438 busy = status & SMBHSTSTS_HOST_BUSY;
439 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
441 return status & STATUS_ERROR_FLAGS;
442 } while (time_is_after_eq_jiffies(timeout));
447 /* Wait for either BYTE_DONE or an error flag being set */
448 static int i801_wait_byte_done(struct i801_priv *priv)
450 unsigned long timeout = jiffies + priv->adapter.timeout;
454 usleep_range(250, 500);
455 status = inb_p(SMBHSTSTS(priv));
456 if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE))
457 return status & STATUS_ERROR_FLAGS;
458 } while (time_is_after_eq_jiffies(timeout));
463 static int i801_transaction(struct i801_priv *priv, int xact)
465 unsigned long result;
466 const struct i2c_adapter *adap = &priv->adapter;
468 if (priv->features & FEATURE_IRQ) {
469 reinit_completion(&priv->done);
470 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
472 result = wait_for_completion_timeout(&priv->done, adap->timeout);
473 return result ? priv->status : -ETIMEDOUT;
476 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
478 return i801_wait_intr(priv);
481 static int i801_block_transaction_by_block(struct i801_priv *priv,
482 union i2c_smbus_data *data,
483 char read_write, int command)
485 int i, len, status, xact;
488 case I2C_SMBUS_BLOCK_PROC_CALL:
489 xact = I801_BLOCK_PROC_CALL;
491 case I2C_SMBUS_BLOCK_DATA:
492 xact = I801_BLOCK_DATA;
498 /* Set block buffer mode */
499 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
501 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
503 if (read_write == I2C_SMBUS_WRITE) {
504 len = data->block[0];
505 outb_p(len, SMBHSTDAT0(priv));
506 for (i = 0; i < len; i++)
507 outb_p(data->block[i+1], SMBBLKDAT(priv));
510 status = i801_transaction(priv, xact);
514 if (read_write == I2C_SMBUS_READ ||
515 command == I2C_SMBUS_BLOCK_PROC_CALL) {
516 len = inb_p(SMBHSTDAT0(priv));
517 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
522 data->block[0] = len;
523 for (i = 0; i < len; i++)
524 data->block[i + 1] = inb_p(SMBBLKDAT(priv));
527 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_E32B, SMBAUXCTL(priv));
531 static void i801_isr_byte_done(struct i801_priv *priv)
534 /* For SMBus block reads, length is received with first byte */
535 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
536 (priv->count == 0)) {
537 priv->len = inb_p(SMBHSTDAT0(priv));
538 if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
539 dev_err(&priv->pci_dev->dev,
540 "Illegal SMBus block read size %d\n",
543 priv->len = I2C_SMBUS_BLOCK_MAX;
545 priv->data[-1] = priv->len;
549 if (priv->count < priv->len)
550 priv->data[priv->count++] = inb(SMBBLKDAT(priv));
552 dev_dbg(&priv->pci_dev->dev,
553 "Discarding extra byte on block read\n");
555 /* Set LAST_BYTE for last byte of read transaction */
556 if (priv->count == priv->len - 1)
557 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
559 } else if (priv->count < priv->len - 1) {
560 /* Write next byte, except for IRQ after last byte */
561 outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
565 static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
569 addr = inb_p(SMBNTFDADD(priv)) >> 1;
572 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
573 * always returns 0. Our current implementation doesn't provide
574 * data, so we just ignore it.
576 i2c_handle_smbus_host_notify(&priv->adapter, addr);
578 /* clear Host Notify bit and return */
579 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
584 * There are three kinds of interrupts:
586 * 1) i801 signals transaction completion with one of these interrupts:
588 * DEV_ERR - Invalid command, NAK or communication timeout
589 * BUS_ERR - SMI# transaction collision
590 * FAILED - transaction was canceled due to a KILL request
591 * When any of these occur, update ->status and signal completion.
593 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
594 * occurs for each byte of a byte-by-byte to prepare the next byte.
596 * 3) Host Notify interrupts
598 static irqreturn_t i801_isr(int irq, void *dev_id)
600 struct i801_priv *priv = dev_id;
604 /* Confirm this is our interrupt */
605 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
606 if (!(pcists & PCI_STATUS_INTERRUPT))
609 if (priv->features & FEATURE_HOST_NOTIFY) {
610 status = inb_p(SMBSLVSTS(priv));
611 if (status & SMBSLVSTS_HST_NTFY_STS)
612 return i801_host_notify_isr(priv);
615 status = inb_p(SMBHSTSTS(priv));
616 if ((status & (SMBHSTSTS_BYTE_DONE | STATUS_ERROR_FLAGS)) == SMBHSTSTS_BYTE_DONE)
617 i801_isr_byte_done(priv);
620 * Clear IRQ sources: SMB_ALERT status is set after signal assertion
621 * independently of the interrupt generation being blocked or not
622 * so clear it always when the status is set.
624 status &= STATUS_FLAGS | SMBHSTSTS_SMBALERT_STS;
625 outb_p(status, SMBHSTSTS(priv));
627 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
629 priv->status = status & STATUS_ERROR_FLAGS;
630 complete(&priv->done);
637 * For "byte-by-byte" block transactions:
638 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
639 * I2C read uses cmd=I801_I2C_BLOCK_DATA
641 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
642 union i2c_smbus_data *data,
643 char read_write, int command)
648 unsigned long result;
649 const struct i2c_adapter *adap = &priv->adapter;
651 if (command == I2C_SMBUS_BLOCK_PROC_CALL)
654 len = data->block[0];
656 if (read_write == I2C_SMBUS_WRITE) {
657 outb_p(len, SMBHSTDAT0(priv));
658 outb_p(data->block[1], SMBBLKDAT(priv));
661 if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
662 read_write == I2C_SMBUS_READ)
663 smbcmd = I801_I2C_BLOCK_DATA;
665 smbcmd = I801_BLOCK_DATA;
667 if (priv->features & FEATURE_IRQ) {
668 priv->is_read = (read_write == I2C_SMBUS_READ);
669 if (len == 1 && priv->is_read)
670 smbcmd |= SMBHSTCNT_LAST_BYTE;
671 priv->cmd = smbcmd | SMBHSTCNT_INTREN;
674 priv->data = &data->block[1];
676 reinit_completion(&priv->done);
677 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
678 result = wait_for_completion_timeout(&priv->done, adap->timeout);
679 return result ? priv->status : -ETIMEDOUT;
682 for (i = 1; i <= len; i++) {
683 if (i == len && read_write == I2C_SMBUS_READ)
684 smbcmd |= SMBHSTCNT_LAST_BYTE;
685 outb_p(smbcmd, SMBHSTCNT(priv));
688 outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
691 status = i801_wait_byte_done(priv);
695 if (i == 1 && read_write == I2C_SMBUS_READ
696 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
697 len = inb_p(SMBHSTDAT0(priv));
698 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
699 dev_err(&priv->pci_dev->dev,
700 "Illegal SMBus block read size %d\n",
703 while (inb_p(SMBHSTSTS(priv)) &
705 outb_p(SMBHSTSTS_BYTE_DONE,
707 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
710 data->block[0] = len;
713 /* Retrieve/store value in SMBBLKDAT */
714 if (read_write == I2C_SMBUS_READ)
715 data->block[i] = inb_p(SMBBLKDAT(priv));
716 if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
717 outb_p(data->block[i+1], SMBBLKDAT(priv));
719 /* signals SMBBLKDAT ready */
720 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
723 return i801_wait_intr(priv);
726 static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write)
728 outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv));
731 /* Single value transaction function */
732 static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
733 u8 addr, u8 hstcmd, char read_write, int command)
738 case I2C_SMBUS_QUICK:
739 i801_set_hstadd(priv, addr, read_write);
743 i801_set_hstadd(priv, addr, read_write);
744 if (read_write == I2C_SMBUS_WRITE)
745 outb_p(hstcmd, SMBHSTCMD(priv));
748 case I2C_SMBUS_BYTE_DATA:
749 i801_set_hstadd(priv, addr, read_write);
750 if (read_write == I2C_SMBUS_WRITE)
751 outb_p(data->byte, SMBHSTDAT0(priv));
752 outb_p(hstcmd, SMBHSTCMD(priv));
753 xact = I801_BYTE_DATA;
755 case I2C_SMBUS_WORD_DATA:
756 i801_set_hstadd(priv, addr, read_write);
757 if (read_write == I2C_SMBUS_WRITE) {
758 outb_p(data->word & 0xff, SMBHSTDAT0(priv));
759 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
761 outb_p(hstcmd, SMBHSTCMD(priv));
762 xact = I801_WORD_DATA;
764 case I2C_SMBUS_PROC_CALL:
765 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
766 outb_p(data->word & 0xff, SMBHSTDAT0(priv));
767 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
768 outb_p(hstcmd, SMBHSTCMD(priv));
769 read_write = I2C_SMBUS_READ;
770 xact = I801_PROC_CALL;
773 pci_err(priv->pci_dev, "Unsupported transaction %d\n", command);
777 ret = i801_transaction(priv, xact);
778 if (ret || read_write == I2C_SMBUS_WRITE)
783 case I2C_SMBUS_BYTE_DATA:
784 data->byte = inb_p(SMBHSTDAT0(priv));
786 case I2C_SMBUS_WORD_DATA:
787 case I2C_SMBUS_PROC_CALL:
788 data->word = inb_p(SMBHSTDAT0(priv)) +
789 (inb_p(SMBHSTDAT1(priv)) << 8);
796 /* Block transaction function */
797 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
798 u8 addr, u8 hstcmd, char read_write, int command)
803 if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
804 data->block[0] = I2C_SMBUS_BLOCK_MAX;
805 else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
809 case I2C_SMBUS_BLOCK_DATA:
810 i801_set_hstadd(priv, addr, read_write);
811 outb_p(hstcmd, SMBHSTCMD(priv));
813 case I2C_SMBUS_I2C_BLOCK_DATA:
815 * NB: page 240 of ICH5 datasheet shows that the R/#W
816 * bit should be cleared here, even when reading.
817 * However if SPD Write Disable is set (Lynx Point and later),
818 * the read will fail if we don't set the R/#W bit.
820 i801_set_hstadd(priv, addr,
821 priv->original_hstcfg & SMBHSTCFG_SPD_WD ?
822 read_write : I2C_SMBUS_WRITE);
823 if (read_write == I2C_SMBUS_READ) {
824 /* NB: page 240 of ICH5 datasheet also shows
825 * that DATA1 is the cmd field when reading
827 outb_p(hstcmd, SMBHSTDAT1(priv));
829 outb_p(hstcmd, SMBHSTCMD(priv));
831 if (read_write == I2C_SMBUS_WRITE) {
832 /* set I2C_EN bit in configuration register */
833 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
834 pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
835 hostc | SMBHSTCFG_I2C_EN);
836 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
837 dev_err(&priv->pci_dev->dev,
838 "I2C block read is unsupported!\n");
842 case I2C_SMBUS_BLOCK_PROC_CALL:
843 /* Needs to be flagged as write transaction */
844 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
845 outb_p(hstcmd, SMBHSTCMD(priv));
849 /* Experience has shown that the block buffer can only be used for
850 SMBus (not I2C) block transactions, even though the datasheet
851 doesn't mention this limitation. */
852 if ((priv->features & FEATURE_BLOCK_BUFFER) &&
853 command != I2C_SMBUS_I2C_BLOCK_DATA)
854 result = i801_block_transaction_by_block(priv, data,
858 result = i801_block_transaction_byte_by_byte(priv, data,
862 if (command == I2C_SMBUS_I2C_BLOCK_DATA
863 && read_write == I2C_SMBUS_WRITE) {
864 /* restore saved configuration register value */
865 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
870 /* Return negative errno on error. */
871 static s32 i801_access(struct i2c_adapter *adap, u16 addr,
872 unsigned short flags, char read_write, u8 command,
873 int size, union i2c_smbus_data *data)
876 struct i801_priv *priv = i2c_get_adapdata(adap);
878 mutex_lock(&priv->acpi_lock);
879 if (priv->acpi_reserved) {
880 mutex_unlock(&priv->acpi_lock);
884 pm_runtime_get_sync(&priv->pci_dev->dev);
886 ret = i801_check_pre(priv);
890 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
891 && size != I2C_SMBUS_QUICK
892 && size != I2C_SMBUS_I2C_BLOCK_DATA;
894 if (hwpec) /* enable/disable hardware PEC */
895 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
897 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
900 if (size == I2C_SMBUS_BLOCK_DATA ||
901 size == I2C_SMBUS_I2C_BLOCK_DATA ||
902 size == I2C_SMBUS_BLOCK_PROC_CALL)
903 ret = i801_block_transaction(priv, data, addr, command, read_write, size);
905 ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
907 ret = i801_check_post(priv, ret);
909 /* Some BIOSes don't like it when PEC is enabled at reboot or resume
910 * time, so we forcibly disable it after every transaction.
913 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv));
916 * Unlock the SMBus device for use by BIOS/ACPI,
917 * and clear status flags if not done already.
919 outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
921 pm_runtime_mark_last_busy(&priv->pci_dev->dev);
922 pm_runtime_put_autosuspend(&priv->pci_dev->dev);
923 mutex_unlock(&priv->acpi_lock);
928 static u32 i801_func(struct i2c_adapter *adapter)
930 struct i801_priv *priv = i2c_get_adapdata(adapter);
932 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
933 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
934 I2C_FUNC_SMBUS_PROC_CALL |
935 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
936 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
937 ((priv->features & FEATURE_BLOCK_PROC) ?
938 I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) |
939 ((priv->features & FEATURE_I2C_BLOCK_READ) ?
940 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
941 ((priv->features & FEATURE_HOST_NOTIFY) ?
942 I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
945 static void i801_enable_host_notify(struct i2c_adapter *adapter)
947 struct i801_priv *priv = i2c_get_adapdata(adapter);
949 if (!(priv->features & FEATURE_HOST_NOTIFY))
953 * Enable host notify interrupt and block the generation of interrupt
954 * from the SMB_ALERT signal because the driver does not support
957 outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
958 priv->original_slvcmd, SMBSLVCMD(priv));
960 /* clear Host Notify bit to allow a new notification */
961 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
964 static void i801_disable_host_notify(struct i801_priv *priv)
966 if (!(priv->features & FEATURE_HOST_NOTIFY))
969 outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
972 static const struct i2c_algorithm smbus_algorithm = {
973 .smbus_xfer = i801_access,
974 .functionality = i801_func,
977 #define FEATURES_ICH5 (FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ | \
978 FEATURE_IRQ | FEATURE_SMBUS_PEC | \
979 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY)
980 #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
983 static const struct pci_device_id i801_ids[] = {
984 { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) },
985 { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) },
986 { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) },
987 { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) },
988 { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) },
989 { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) },
990 { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) },
991 { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) },
992 { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) },
993 { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) },
994 { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) },
995 { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) },
996 { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) },
997 { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) },
998 { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) },
999 { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) },
1000 { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) },
1001 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) },
1002 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) },
1003 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) },
1004 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) },
1005 { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) },
1006 { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) },
1007 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) },
1008 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) },
1009 { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) },
1010 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) },
1011 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) },
1012 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) },
1013 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) },
1014 { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) },
1015 { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) },
1016 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) },
1017 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) },
1018 { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) },
1019 { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) },
1020 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1021 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1022 { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1023 { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1024 { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1025 { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) },
1026 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1027 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1028 { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1029 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1030 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1031 { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1032 { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1033 { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1034 { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1035 { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1036 { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1037 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1038 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1039 { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1040 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1041 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1042 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1043 { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1044 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1045 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1046 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1050 MODULE_DEVICE_TABLE(pci, i801_ids);
1052 #if defined CONFIG_X86 && defined CONFIG_DMI
1053 static unsigned char apanel_addr;
1055 /* Scan the system ROM for the signature "FJKEYINF" */
1056 static __init const void __iomem *bios_signature(const void __iomem *bios)
1059 const unsigned char signature[] = "FJKEYINF";
1061 for (offset = 0; offset < 0x10000; offset += 0x10) {
1062 if (check_signature(bios + offset, signature,
1063 sizeof(signature)-1))
1064 return bios + offset;
1069 static void __init input_apanel_init(void)
1072 const void __iomem *p;
1074 bios = ioremap(0xF0000, 0x10000); /* Can't fail */
1075 p = bios_signature(bios);
1077 /* just use the first address */
1078 apanel_addr = readb(p + 8 + 3) >> 1;
1083 struct dmi_onboard_device_info {
1086 unsigned short i2c_addr;
1087 const char *i2c_type;
1090 static const struct dmi_onboard_device_info dmi_devices[] = {
1091 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
1092 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
1093 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
1096 static void dmi_check_onboard_device(u8 type, const char *name,
1097 struct i2c_adapter *adap)
1100 struct i2c_board_info info;
1102 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
1103 /* & ~0x80, ignore enabled/disabled bit */
1104 if ((type & ~0x80) != dmi_devices[i].type)
1106 if (strcasecmp(name, dmi_devices[i].name))
1109 memset(&info, 0, sizeof(struct i2c_board_info));
1110 info.addr = dmi_devices[i].i2c_addr;
1111 strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
1112 i2c_new_client_device(adap, &info);
1117 /* We use our own function to check for onboard devices instead of
1118 dmi_find_device() as some buggy BIOS's have the devices we are interested
1119 in marked as disabled */
1120 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
1127 count = (dm->length - sizeof(struct dmi_header)) / 2;
1128 for (i = 0; i < count; i++) {
1129 const u8 *d = (char *)(dm + 1) + (i * 2);
1130 const char *name = ((char *) dm) + dm->length;
1137 while (s > 0 && name[0]) {
1138 name += strlen(name) + 1;
1141 if (name[0] == 0) /* Bogus string reference */
1144 dmi_check_onboard_device(type, name, adap);
1148 /* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */
1149 static const char *const acpi_smo8800_ids[] = {
1160 static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle,
1163 void **return_value)
1165 struct acpi_device_info *info;
1170 status = acpi_get_object_info(obj_handle, &info);
1171 if (ACPI_FAILURE(status))
1174 if (!(info->valid & ACPI_VALID_HID))
1175 goto smo88xx_not_found;
1177 hid = info->hardware_id.string;
1179 goto smo88xx_not_found;
1181 i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid);
1183 goto smo88xx_not_found;
1187 *return_value = NULL;
1188 return AE_CTRL_TERMINATE;
1195 static bool is_dell_system_with_lis3lv02d(void)
1197 void *err = ERR_PTR(-ENOENT);
1199 if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc."))
1203 * Check that ACPI device SMO88xx is present and is functioning.
1204 * Function acpi_get_devices() already filters all ACPI devices
1205 * which are not present or are not functioning.
1206 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d
1207 * accelerometer but unfortunately ACPI does not provide any other
1208 * information (like I2C address).
1210 acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err);
1212 return !IS_ERR(err);
1216 * Accelerometer's I2C address is not specified in DMI nor ACPI,
1217 * so it is needed to define mapping table based on DMI product names.
1219 static const struct {
1220 const char *dmi_product_name;
1221 unsigned short i2c_addr;
1222 } dell_lis3lv02d_devices[] = {
1224 * Dell platform team told us that these Latitude devices have
1225 * ST microelectronics accelerometer at I2C address 0x29.
1227 { "Latitude E5250", 0x29 },
1228 { "Latitude E5450", 0x29 },
1229 { "Latitude E5550", 0x29 },
1230 { "Latitude E6440", 0x29 },
1231 { "Latitude E6440 ATG", 0x29 },
1232 { "Latitude E6540", 0x29 },
1234 * Additional individual entries were added after verification.
1236 { "Latitude 5480", 0x29 },
1237 { "Vostro V131", 0x1d },
1238 { "Vostro 5568", 0x29 },
1241 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
1243 struct i2c_board_info info;
1244 const char *dmi_product_name;
1247 dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
1248 for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
1249 if (strcmp(dmi_product_name,
1250 dell_lis3lv02d_devices[i].dmi_product_name) == 0)
1254 if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
1255 dev_warn(&priv->pci_dev->dev,
1256 "Accelerometer lis3lv02d is present on SMBus but its"
1257 " address is unknown, skipping registration\n");
1261 memset(&info, 0, sizeof(struct i2c_board_info));
1262 info.addr = dell_lis3lv02d_devices[i].i2c_addr;
1263 strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
1264 i2c_new_client_device(&priv->adapter, &info);
1267 /* Register optional slaves */
1268 static void i801_probe_optional_slaves(struct i801_priv *priv)
1270 /* Only register slaves on main SMBus channel */
1271 if (priv->features & FEATURE_IDF)
1275 struct i2c_board_info info = {
1276 .addr = apanel_addr,
1277 .type = "fujitsu_apanel",
1280 i2c_new_client_device(&priv->adapter, &info);
1283 if (dmi_name_in_vendors("FUJITSU"))
1284 dmi_walk(dmi_check_onboard_devices, &priv->adapter);
1286 if (is_dell_system_with_lis3lv02d())
1287 register_dell_lis3lv02d_i2c_device(priv);
1289 /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
1290 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
1291 if (!priv->mux_drvdata)
1293 i2c_register_spd(&priv->adapter);
1296 static void __init input_apanel_init(void) {}
1297 static void i801_probe_optional_slaves(struct i801_priv *priv) {}
1298 #endif /* CONFIG_X86 && CONFIG_DMI */
1300 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
1301 static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
1302 .gpio_chip = "gpio_ich",
1303 .values = { 0x02, 0x03 },
1305 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
1306 .gpios = { 52, 53 },
1310 static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
1311 .gpio_chip = "gpio_ich",
1312 .values = { 0x02, 0x03, 0x01 },
1314 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
1315 .gpios = { 52, 53 },
1319 static const struct dmi_system_id mux_dmi_table[] = {
1322 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1323 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
1325 .driver_data = &i801_mux_config_asus_z8_d12,
1329 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1330 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
1332 .driver_data = &i801_mux_config_asus_z8_d12,
1336 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1337 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
1339 .driver_data = &i801_mux_config_asus_z8_d12,
1343 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1344 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
1346 .driver_data = &i801_mux_config_asus_z8_d12,
1350 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1351 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
1353 .driver_data = &i801_mux_config_asus_z8_d12,
1357 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1358 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
1360 .driver_data = &i801_mux_config_asus_z8_d12,
1364 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1365 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
1367 .driver_data = &i801_mux_config_asus_z8_d18,
1371 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1372 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
1374 .driver_data = &i801_mux_config_asus_z8_d18,
1378 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1379 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
1381 .driver_data = &i801_mux_config_asus_z8_d12,
1386 /* Setup multiplexing if needed */
1387 static void i801_add_mux(struct i801_priv *priv)
1389 struct device *dev = &priv->adapter.dev;
1390 const struct i801_mux_config *mux_config;
1391 struct i2c_mux_gpio_platform_data gpio_data;
1392 struct gpiod_lookup_table *lookup;
1395 if (!priv->mux_drvdata)
1397 mux_config = priv->mux_drvdata;
1399 /* Prepare the platform data */
1400 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
1401 gpio_data.parent = priv->adapter.nr;
1402 gpio_data.values = mux_config->values;
1403 gpio_data.n_values = mux_config->n_values;
1404 gpio_data.classes = mux_config->classes;
1405 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
1407 /* Register GPIO descriptor lookup table */
1408 lookup = devm_kzalloc(dev,
1409 struct_size(lookup, table, mux_config->n_gpios + 1),
1413 lookup->dev_id = "i2c-mux-gpio";
1414 for (i = 0; i < mux_config->n_gpios; i++)
1415 lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
1416 mux_config->gpios[i], "mux", 0);
1417 gpiod_add_lookup_table(lookup);
1418 priv->lookup = lookup;
1421 * Register the mux device, we use PLATFORM_DEVID_NONE here
1422 * because since we are referring to the GPIO chip by name we are
1423 * anyways in deep trouble if there is more than one of these
1424 * devices, and there should likely only be one platform controller
1427 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
1428 PLATFORM_DEVID_NONE, &gpio_data,
1429 sizeof(struct i2c_mux_gpio_platform_data));
1430 if (IS_ERR(priv->mux_pdev)) {
1431 gpiod_remove_lookup_table(lookup);
1432 dev_err(dev, "Failed to register i2c-mux-gpio device\n");
1436 static void i801_del_mux(struct i801_priv *priv)
1438 platform_device_unregister(priv->mux_pdev);
1439 gpiod_remove_lookup_table(priv->lookup);
1442 static unsigned int i801_get_adapter_class(struct i801_priv *priv)
1444 const struct dmi_system_id *id;
1445 const struct i801_mux_config *mux_config;
1446 unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
1449 id = dmi_first_match(mux_dmi_table);
1451 /* Remove branch classes from trunk */
1452 mux_config = id->driver_data;
1453 for (i = 0; i < mux_config->n_values; i++)
1454 class &= ~mux_config->classes[i];
1456 /* Remember for later */
1457 priv->mux_drvdata = mux_config;
1463 static inline void i801_add_mux(struct i801_priv *priv) { }
1464 static inline void i801_del_mux(struct i801_priv *priv) { }
1466 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
1468 return I2C_CLASS_HWMON | I2C_CLASS_SPD;
1472 static struct platform_device *
1473 i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
1474 struct resource *tco_res)
1476 static const struct itco_wdt_platform_data pldata = {
1477 .name = "Intel PCH",
1480 struct resource *res;
1484 * We must access the NO_REBOOT bit over the Primary to Sideband
1489 ret = p2sb_bar(pci_dev->bus, 0, res);
1491 return ERR_PTR(ret);
1493 if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
1494 res->start += SBREG_SMBCTRL_DNV;
1496 res->start += SBREG_SMBCTRL;
1498 res->end = res->start + 3;
1500 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1501 tco_res, 2, &pldata, sizeof(pldata));
1504 static struct platform_device *
1505 i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
1506 struct resource *tco_res)
1508 static const struct itco_wdt_platform_data pldata = {
1509 .name = "Intel PCH",
1513 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1514 tco_res, 1, &pldata, sizeof(pldata));
1517 static void i801_add_tco(struct i801_priv *priv)
1519 struct pci_dev *pci_dev = priv->pci_dev;
1520 struct resource tco_res[2], *res;
1521 u32 tco_base, tco_ctl;
1523 /* If we have ACPI based watchdog use that instead */
1524 if (acpi_has_watchdog())
1527 if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
1530 pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
1531 pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
1532 if (!(tco_ctl & TCOCTL_EN))
1535 memset(tco_res, 0, sizeof(tco_res));
1537 * Always populate the main iTCO IO resource here. The second entry
1538 * for NO_REBOOT MMIO is filled by the SPT specific function.
1541 res->start = tco_base & ~1;
1542 res->end = res->start + 32 - 1;
1543 res->flags = IORESOURCE_IO;
1545 if (priv->features & FEATURE_TCO_CNL)
1546 priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
1548 priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
1550 if (IS_ERR(priv->tco_pdev))
1551 dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
1555 static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
1556 acpi_physical_address address)
1558 return address >= priv->smba &&
1559 address <= pci_resource_end(priv->pci_dev, SMBBAR);
1563 i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
1564 u64 *value, void *handler_context, void *region_context)
1566 struct i801_priv *priv = handler_context;
1567 struct pci_dev *pdev = priv->pci_dev;
1571 * Once BIOS AML code touches the OpRegion we warn and inhibit any
1572 * further access from the driver itself. This device is now owned
1573 * by the system firmware.
1575 mutex_lock(&priv->acpi_lock);
1577 if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
1578 priv->acpi_reserved = true;
1580 dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
1581 dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
1584 * BIOS is accessing the host controller so prevent it from
1585 * suspending automatically from now on.
1587 pm_runtime_get_sync(&pdev->dev);
1590 if ((function & ACPI_IO_MASK) == ACPI_READ)
1591 status = acpi_os_read_port(address, (u32 *)value, bits);
1593 status = acpi_os_write_port(address, (u32)*value, bits);
1595 mutex_unlock(&priv->acpi_lock);
1600 static int i801_acpi_probe(struct i801_priv *priv)
1602 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
1605 status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO,
1606 i801_acpi_io_handler, NULL, priv);
1607 if (ACPI_SUCCESS(status))
1610 return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
1613 static void i801_acpi_remove(struct i801_priv *priv)
1615 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
1617 acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
1620 static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
1621 static inline void i801_acpi_remove(struct i801_priv *priv) { }
1624 static void i801_setup_hstcfg(struct i801_priv *priv)
1626 unsigned char hstcfg = priv->original_hstcfg;
1628 hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
1629 hstcfg |= SMBHSTCFG_HST_EN;
1630 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
1633 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
1636 struct i801_priv *priv;
1638 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
1642 i2c_set_adapdata(&priv->adapter, priv);
1643 priv->adapter.owner = THIS_MODULE;
1644 priv->adapter.class = i801_get_adapter_class(priv);
1645 priv->adapter.algo = &smbus_algorithm;
1646 priv->adapter.dev.parent = &dev->dev;
1647 ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
1648 priv->adapter.retries = 3;
1649 mutex_init(&priv->acpi_lock);
1651 priv->pci_dev = dev;
1652 priv->features = id->driver_data;
1654 /* Disable features on user request */
1655 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
1656 if (priv->features & disable_features & (1 << i))
1657 dev_notice(&dev->dev, "%s disabled by user\n",
1658 i801_feature_names[i]);
1660 priv->features &= ~disable_features;
1662 /* The block process call uses block buffer mode */
1663 if (!(priv->features & FEATURE_BLOCK_BUFFER))
1664 priv->features &= ~FEATURE_BLOCK_PROC;
1666 err = pcim_enable_device(dev);
1668 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
1672 pcim_pin_device(dev);
1674 /* Determine the address of the SMBus area */
1675 priv->smba = pci_resource_start(dev, SMBBAR);
1678 "SMBus base address uninitialized, upgrade BIOS\n");
1682 if (i801_acpi_probe(priv))
1685 err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME);
1688 "Failed to request SMBus region 0x%lx-0x%Lx\n",
1690 (unsigned long long)pci_resource_end(dev, SMBBAR));
1691 i801_acpi_remove(priv);
1695 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
1696 i801_setup_hstcfg(priv);
1697 if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
1698 dev_info(&dev->dev, "Enabling SMBus device\n");
1700 if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) {
1701 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
1702 /* Disable SMBus interrupt feature if SMBus using SMI# */
1703 priv->features &= ~FEATURE_IRQ;
1705 if (priv->original_hstcfg & SMBHSTCFG_SPD_WD)
1706 dev_info(&dev->dev, "SPD Write Disable is set\n");
1708 /* Clear special mode bits */
1709 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
1710 outb_p(inb_p(SMBAUXCTL(priv)) &
1711 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
1713 /* Default timeout in interrupt mode: 200 ms */
1714 priv->adapter.timeout = HZ / 5;
1716 if (dev->irq == IRQ_NOTCONNECTED)
1717 priv->features &= ~FEATURE_IRQ;
1719 if (priv->features & FEATURE_IRQ) {
1722 /* Complain if an interrupt is already pending */
1723 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
1724 if (pcists & PCI_STATUS_INTERRUPT)
1725 dev_warn(&dev->dev, "An interrupt is pending!\n");
1728 if (priv->features & FEATURE_IRQ) {
1729 init_completion(&priv->done);
1731 err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
1732 IRQF_SHARED, DRV_NAME, priv);
1734 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
1736 priv->features &= ~FEATURE_IRQ;
1739 dev_info(&dev->dev, "SMBus using %s\n",
1740 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
1742 /* Host notification uses an interrupt */
1743 if (!(priv->features & FEATURE_IRQ))
1744 priv->features &= ~FEATURE_HOST_NOTIFY;
1746 /* Remember original Interrupt and Host Notify settings */
1747 priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
1748 if (priv->features & FEATURE_HOST_NOTIFY)
1749 priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
1753 snprintf(priv->adapter.name, sizeof(priv->adapter.name),
1754 "SMBus I801 adapter at %04lx", priv->smba);
1755 err = i2c_add_adapter(&priv->adapter);
1757 platform_device_unregister(priv->tco_pdev);
1758 i801_acpi_remove(priv);
1762 i801_enable_host_notify(&priv->adapter);
1764 i801_probe_optional_slaves(priv);
1765 /* We ignore errors - multiplexing is optional */
1768 pci_set_drvdata(dev, priv);
1770 dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
1771 pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
1772 pm_runtime_use_autosuspend(&dev->dev);
1773 pm_runtime_put_autosuspend(&dev->dev);
1774 pm_runtime_allow(&dev->dev);
1779 static void i801_remove(struct pci_dev *dev)
1781 struct i801_priv *priv = pci_get_drvdata(dev);
1783 outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
1784 i801_disable_host_notify(priv);
1786 i2c_del_adapter(&priv->adapter);
1787 i801_acpi_remove(priv);
1788 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
1790 platform_device_unregister(priv->tco_pdev);
1792 /* if acpi_reserved is set then usage_count is incremented already */
1793 if (!priv->acpi_reserved)
1794 pm_runtime_get_noresume(&dev->dev);
1797 * do not call pci_disable_device(dev) since it can cause hard hangs on
1798 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
1802 static void i801_shutdown(struct pci_dev *dev)
1804 struct i801_priv *priv = pci_get_drvdata(dev);
1806 /* Restore config registers to avoid hard hang on some systems */
1807 outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
1808 i801_disable_host_notify(priv);
1809 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
1812 static int i801_suspend(struct device *dev)
1814 struct i801_priv *priv = dev_get_drvdata(dev);
1816 outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
1817 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
1821 static int i801_resume(struct device *dev)
1823 struct i801_priv *priv = dev_get_drvdata(dev);
1825 i801_setup_hstcfg(priv);
1826 i801_enable_host_notify(&priv->adapter);
1831 static DEFINE_SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
1833 static struct pci_driver i801_driver = {
1835 .id_table = i801_ids,
1836 .probe = i801_probe,
1837 .remove = i801_remove,
1838 .shutdown = i801_shutdown,
1840 .pm = pm_sleep_ptr(&i801_pm_ops),
1841 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1845 static int __init i2c_i801_init(void)
1847 if (dmi_name_in_vendors("FUJITSU"))
1848 input_apanel_init();
1849 return pci_register_driver(&i801_driver);
1852 static void __exit i2c_i801_exit(void)
1854 pci_unregister_driver(&i801_driver);
1857 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
1858 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
1859 MODULE_DESCRIPTION("I801 SMBus driver");
1860 MODULE_LICENSE("GPL");
1862 module_init(i2c_i801_init);
1863 module_exit(i2c_i801_exit);