2 # I2C subsystem configuration
10 This is a stand-in for an option to enable I2C support. In fact this
11 simply enables building of the I2C directory for U-Boot. The actual
12 I2C feature is enabled by DM_I2C (for driver model) and
13 the #define CONFIG_SYS_I2C_LEGACY (for the legacy I2C stack).
15 So at present there is no need to ever disable this option.
19 Enable support for the I2C (Inter-Integrated Circuit) bus in U-Boot.
20 I2C works with a clock and data line which can be driven by a
21 one or more masters or slaves. It is a fairly complex bus but is
22 widely used as it only needs two lines for communication. Speeds of
23 400kbps are typical but up to 3.4Mbps is supported by some
24 hardware. Enable this option to build the drivers in drivers/i2c as
25 part of a U-Boot build.
30 bool "Enable Driver Model for I2C drivers"
33 Enable driver model for I2C. The I2C uclass interface: probe, read,
34 write and speed, is implemented with the bus drivers operations,
35 which provide methods for bus setting and data transfer. Each chip
36 device (bus child) info is kept as parent plat. The interface
37 is defined in include/i2c.h.
40 bool "Enable Driver Model for I2C drivers in SPL"
41 depends on SPL_DM && DM_I2C
44 Enable driver model for I2C. The I2C uclass interface: probe, read,
45 write and speed, is implemented with the bus drivers operations,
46 which provide methods for bus setting and data transfer. Each chip
47 device (bus child) info is kept as parent platdata. The interface
48 is defined in include/i2c.h.
51 bool "Enable Driver Model for I2C drivers in TPL"
52 depends on TPL_DM && DM_I2C
54 Enable driver model for I2C. The I2C uclass interface: probe, read,
55 write and speed, is implemented with the bus drivers operations,
56 which provide methods for bus setting and data transfer. Each chip
57 device (bus child) info is kept as parent platdata. The interface
58 is defined in include/i2c.h.
61 bool "Enable Driver Model for I2C drivers in VPL"
62 depends on VPL_DM && DM_I2C
65 Enable driver model for I2C. The I2C uclass interface: probe, read,
66 write and speed, is implemented with the bus drivers operations,
67 which provide methods for bus setting and data transfer. Each chip
68 device (bus child) info is kept as parent platdata. The interface
69 is defined in include/i2c.h.
72 bool "Enable legacy I2C subsystem and drivers"
75 Enable the legacy I2C subsystem and drivers. While this is
76 deprecated in U-Boot itself, this can be useful in some situations
79 config SPL_SYS_I2C_LEGACY
80 bool "Enable legacy I2C subsystem and drivers in SPL"
81 depends on SUPPORT_SPL && !SPL_DM_I2C
83 Enable the legacy I2C subsystem and drivers in SPL. This is useful
84 in some size constrained situations.
86 config TPL_SYS_I2C_LEGACY
87 bool "Enable legacy I2C subsystem and drivers in TPL"
88 depends on SUPPORT_TPL && !SPL_DM_I2C
90 Enable the legacy I2C subsystem and drivers in TPL. This is useful
91 in some size constrained situations.
93 config SYS_I2C_EARLY_INIT
94 bool "Enable legacy I2C subsystem early in boot"
95 depends on BOARD_EARLY_INIT_F && SPL_SYS_I2C_LEGACY && SYS_I2C_MXC
97 Add the function prototype for i2c_early_init_f which is called in
100 config I2C_CROS_EC_TUNNEL
101 tristate "Chrome OS EC tunnel I2C bus"
104 This provides an I2C bus that will tunnel i2c commands through to
105 the other side of the Chrome OS EC to the I2C bus connected there.
106 This will work whatever the interface used to talk to the EC (SPI,
107 I2C or LPC). Some Chromebooks use this when the hardware design
108 does not allow direct access to the main PMIC from the AP.
110 config I2C_CROS_EC_LDO
111 bool "Provide access to LDOs on the Chrome OS EC"
114 On many Chromebooks the main PMIC is inaccessible to the AP. This is
115 often dealt with by using an I2C pass-through interface provided by
116 the EC. On some unfortunate models (e.g. Spring) the pass-through
117 is not available, and an LDO message is available instead. This
118 option enables a driver which provides very basic access to those
119 regulators, via the EC. We implement this as an I2C bus which
120 emulates just the TPS65090 messages we know about. This is done to
121 avoid duplicating the logic in the TPS65090 regulator driver for
122 enabling/disabling an LDO.
124 config I2C_SET_DEFAULT_BUS_NUM
125 bool "Set default I2C bus number"
128 Set default number of I2C bus to be accessed. This option provides
129 behaviour similar to old (i.e. pre DM) I2C bus driver.
131 config I2C_DEFAULT_BUS_NUMBER
132 hex "I2C default bus number"
133 depends on I2C_SET_DEFAULT_BUS_NUM
136 Number of default I2C bus to use
139 bool "Enable Driver Model for software emulated I2C bus driver"
140 depends on DM_I2C && DM_GPIO
142 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
143 configuration is given by the device tree. Kernel-style device tree
144 bindings are supported.
145 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
147 config SPL_DM_I2C_GPIO
148 bool "Enable Driver Model for software emulated I2C bus driver in SPL"
149 depends on SPL_DM && DM_I2C_GPIO && SPL_DM_GPIO && SPL_GPIO
152 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
153 configuration is given by the device tree. Kernel-style device tree
154 bindings are supported.
155 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
158 bool "Atmel I2C driver"
159 depends on DM_I2C && ARCH_AT91
161 Add support for the Atmel I2C driver. A serious problem is that there
162 is no documented way to issue repeated START conditions for more than
163 two messages, as needed to support combined I2C messages. Use the
164 i2c-gpio driver unless your system can cope with this limitation.
165 Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
168 bool "Broadcom I2C driver"
172 Add support for Broadcom I2C driver.
173 Say yes here to to enable the Broadco I2C driver.
176 bool "Freescale I2C bus driver"
178 Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
181 if SYS_I2C_FSL && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
182 config SYS_FSL_I2C_OFFSET
183 hex "Offset from the IMMR of the address of the first I2C controller"
185 config SYS_FSL_HAS_I2C2_OFFSET
186 bool "Support a second I2C controller"
188 config SYS_FSL_I2C2_OFFSET
189 hex "Offset from the IMMR of the address of the second I2C controller"
190 depends on SYS_FSL_HAS_I2C2_OFFSET
192 config SYS_FSL_HAS_I2C3_OFFSET
193 bool "Support a third I2C controller"
195 config SYS_FSL_I2C3_OFFSET
196 hex "Offset from the IMMR of the address of the third I2C controller"
197 depends on SYS_FSL_HAS_I2C3_OFFSET
199 config SYS_FSL_HAS_I2C4_OFFSET
200 bool "Support a fourth I2C controller"
202 config SYS_FSL_I2C4_OFFSET
203 hex "Offset from the IMMR of the address of the fourth I2C controller"
204 depends on SYS_FSL_HAS_I2C4_OFFSET
207 config SYS_I2C_CADENCE
208 tristate "Cadence I2C Controller"
211 Say yes here to select Cadence I2C Host Controller. This controller is
212 e.g. used by Xilinx Zynq.
215 tristate "Cortina-Access I2C Controller"
216 depends on DM_I2C && CORTINA_PLATFORM
218 Add support for the Cortina Access I2C host controller.
219 Say yes here to select Cortina-Access I2C Host Controller.
221 config SYS_I2C_DAVINCI
222 bool "Davinci I2C Controller"
223 depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
225 Say yes here to add support for Davinci and Keystone I2C controller
228 bool "Designware I2C Controller"
230 Say yes here to select the Designware I2C Host Controller. This
231 controller is used in various SoCs, e.g. the ST SPEAr, Altera
232 SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
234 config SYS_I2C_AST2600
235 bool "AST2600 I2C Controller"
236 depends on DM_I2C && ARCH_ASPEED
238 Say yes here to select AST2600 I2C Host Controller. The driver
239 support AST2600 I2C new mode register. This I2C controller supports:
240 _Standard-mode (up to 100 kHz)
241 _Fast-mode (up to 400 kHz)
242 _Fast-mode Plus (up to 1 MHz)
244 config SYS_I2C_ASPEED
245 bool "Aspeed I2C Controller"
246 depends on DM_I2C && ARCH_ASPEED
248 Say yes here to select Aspeed I2C Host Controller. The driver
249 supports AST2500 and AST2400 controllers, but is very limited.
250 Only single master mode is supported and only byte-by-byte
251 synchronous reads and writes are supported, no Pool Buffers or DMA.
254 bool "Intel I2C/SMBUS driver"
257 Add support for the Intel SMBUS driver. So far this driver is just
258 a stub which perhaps some basic init. There is no implementation of
259 the I2C API meaning that any I2C operations will immediately fail
262 config SYS_I2C_IMX_LPI2C
263 bool "NXP i.MX LPI2C driver"
265 Add support for the NXP i.MX LPI2C driver.
267 config SYS_I2C_LPC32XX
268 bool "LPC32XX I2C driver"
269 depends on ARCH_LPC32XX
271 Enable support for the LPC32xx I2C driver.
274 bool "Amlogic Meson I2C driver"
275 depends on DM_I2C && ARCH_MESON
277 Add support for the I2C controller available in Amlogic Meson
278 SoCs. The controller supports programmable bus speed including
279 standard (100kbits/s) and fast (400kbit/s) speed and allows the
280 software to define a flexible format of the bit streams. It has an
281 internal buffer holding up to 8 bytes for transfers and supports
282 both 7-bit and 10-bit addresses.
285 bool "MediaTek I2C driver"
287 This selects the MediaTek Integrated Inter Circuit bus driver.
288 The I2C bus adapter is the base for some other I2C client,
290 If you want to use MediaTek I2C interface, say Y here.
293 config SYS_I2C_MICROCHIP
294 bool "Microchip I2C driver"
296 Add support for the Microchip I2C driver. This is operating on
297 standard mode up to 100 kbits/s and fast mode up to 400 kbits/s.
300 bool "NXP MXC I2C driver"
302 Add support for the NXP I2C driver. This supports up to four bus
303 channels and operating on standard mode up to 100 kbits/s and fast
304 mode up to 400 kbits/s.
306 if SYS_I2C_MXC && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
307 config SYS_I2C_MXC_I2C1
310 Add support for NXP MXC I2C Controller 1.
311 Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
313 config SYS_I2C_MXC_I2C2
316 Add support for NXP MXC I2C Controller 2.
317 Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
319 config SYS_I2C_MXC_I2C3
322 Add support for NXP MXC I2C Controller 3.
323 Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
325 config SYS_I2C_MXC_I2C4
328 Add support for NXP MXC I2C Controller 4.
329 Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
331 config SYS_I2C_MXC_I2C5
334 Add support for NXP MXC I2C Controller 5.
335 Required for SoCs which have I2C MXC controller 5 eg LX2160A
337 config SYS_I2C_MXC_I2C6
340 Add support for NXP MXC I2C Controller 6.
341 Required for SoCs which have I2C MXC controller 6 eg LX2160A
343 config SYS_I2C_MXC_I2C7
346 Add support for NXP MXC I2C Controller 7.
347 Required for SoCs which have I2C MXC controller 7 eg LX2160A
349 config SYS_I2C_MXC_I2C8
352 Add support for NXP MXC I2C Controller 8.
353 Required for SoCs which have I2C MXC controller 8 eg LX2160A
357 config SYS_MXC_I2C1_SPEED
358 int "I2C Channel 1 speed"
359 default 40000000 if TARGET_LS2080A_EMU
362 MXC I2C Channel 1 speed
364 config SYS_MXC_I2C1_SLAVE
372 config SYS_MXC_I2C2_SPEED
373 int "I2C Channel 2 speed"
374 default 40000000 if TARGET_LS2080A_EMU
377 MXC I2C Channel 2 speed
379 config SYS_MXC_I2C2_SLAVE
387 config SYS_MXC_I2C3_SPEED
388 int "I2C Channel 3 speed"
391 MXC I2C Channel 3 speed
393 config SYS_MXC_I2C3_SLAVE
401 config SYS_MXC_I2C4_SPEED
402 int "I2C Channel 4 speed"
405 MXC I2C Channel 4 speed
407 config SYS_MXC_I2C4_SLAVE
415 config SYS_MXC_I2C5_SPEED
416 int "I2C Channel 5 speed"
419 MXC I2C Channel 5 speed
421 config SYS_MXC_I2C5_SLAVE
429 config SYS_MXC_I2C6_SPEED
430 int "I2C Channel 6 speed"
433 MXC I2C Channel 6 speed
435 config SYS_MXC_I2C6_SLAVE
443 config SYS_MXC_I2C7_SPEED
444 int "I2C Channel 7 speed"
447 MXC I2C Channel 7 speed
449 config SYS_MXC_I2C7_SLAVE
457 config SYS_MXC_I2C8_SPEED
458 int "I2C Channel 8 speed"
461 MXC I2C Channel 8 speed
463 config SYS_MXC_I2C8_SLAVE
470 config SYS_I2C_NEXELL
471 bool "Nexell I2C driver"
474 Add support for the Nexell I2C driver. This is used with various
475 Nexell parts such as S5Pxx18 series SoCs. All chips
476 have several I2C ports and all are provided, controlled by the
480 bool "Nuvoton NPCM I2C driver"
482 Support for Nuvoton I2C controller driver.
484 config SYS_I2C_OCORES
485 bool "ocores I2C driver"
488 Add support for ocores I2C controller. For details see
489 https://opencores.org/projects/i2c
491 config SYS_I2C_OMAP24XX
492 bool "TI OMAP2+ I2C driver"
493 depends on ARCH_OMAP2PLUS || ARCH_K3
495 Add support for the OMAP2+ I2C driver.
497 config SYS_I2C_RCAR_I2C
498 bool "Renesas RCar I2C driver"
499 depends on (RCAR_GEN2 || RCAR_GEN3) && DM_I2C
501 Support for Renesas RCar I2C controller.
503 config SYS_I2C_RCAR_IIC
504 bool "Renesas RCar Gen3 IIC driver"
505 depends on (RCAR_GEN2 || RCAR_GEN3) && DM_I2C
507 Support for Renesas RCar Gen3 IIC controller.
509 config SYS_I2C_ROCKCHIP
510 bool "Rockchip I2C driver"
513 Add support for the Rockchip I2C driver. This is used with various
514 Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
515 have several I2C ports and all are provided, controlled by the
518 config SYS_I2C_SANDBOX
519 bool "Sandbox I2C driver"
520 depends on SANDBOX && DM_I2C
523 Enable I2C support for sandbox. This is an emulation of a real I2C
524 bus. Devices can be attached to the bus using the device tree
525 which specifies the driver to use. See sandbox.dts as an example.
527 config SPL_SYS_I2C_SANDBOX
528 bool "Sandbox I2C driver (SPL)"
529 depends on SPL && SANDBOX && DM_I2C
532 Enable I2C support for sandbox. This is an emulation of a real I2C
533 bus. Devices can be attached to the bus using the device tree
534 which specifies the driver to use. See sandbox.dts as an example.
537 bool "Legacy SuperH I2C interface"
538 depends on ARCH_RMOBILE && SYS_I2C_LEGACY
540 Enable the legacy SuperH I2C interface.
543 config SYS_I2C_SH_NUM_CONTROLLERS
547 config SYS_I2C_SH_BASE0
551 config SYS_I2C_SH_BASE1
555 config SYS_I2C_SH_BASE2
559 config SYS_I2C_SH_BASE3
563 config SYS_I2C_SH_BASE4
571 config SH_I2C_DATA_HIGH
575 config SH_I2C_DATA_LOW
585 bool "Legacy software I2C interface"
587 Enable the legacy software defined I2C interface
589 config SYS_I2C_SOFT_SPEED
590 int "Software I2C bus speed"
591 depends on SYS_I2C_SOFT
594 Speed of the software I2C bus
596 config SYS_I2C_SOFT_SLAVE
597 hex "Software I2C slave address"
598 depends on SYS_I2C_SOFT
601 Slave address of the software I2C bus
603 config SYS_I2C_OCTEON
604 bool "Octeon II/III/TX/TX2 I2C driver"
605 depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C
608 Add support for the Marvell Octeon I2C driver. This is used with
609 various Octeon parts such as Octeon II/III and OcteonTX/TX2. All
610 chips have several I2C ports and all are provided, controlled by
614 bool "Qualcomm QUP I2C controller"
615 depends on ARCH_SNAPDRAGON
617 Support for Qualcomm QUP I2C controller based on Qualcomm Universal
618 Peripherals (QUP) engine. The QUP engine is an advanced high
619 performance slave port that provides a common data path (an output
620 FIFO and an input FIFO) for I2C and SPI interfaces. The I2C/SPI QUP
621 controller is publicly documented in the Snapdragon 410E (APQ8016E)
622 Technical Reference Manual, chapter "6.1 Qualcomm Universal
623 Peripherals Engine (QUP)".
625 config SYS_I2C_S3C24X0
626 bool "Samsung I2C driver"
627 depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && DM_I2C
629 Support for Samsung I2C controller as Samsung SoCs.
631 config SYS_I2C_STM32F7
632 bool "STMicroelectronics STM32F7 I2C support"
633 depends on (STM32F7 || STM32H7 || ARCH_STM32MP) && DM_I2C
635 Enable this option to add support for STM32 I2C controller
636 introduced with STM32F7/H7 SoCs. This I2C controller supports :
637 _ Slave and master modes
638 _ Multimaster capability
639 _ Standard-mode (up to 100 kHz)
640 _ Fast-mode (up to 400 kHz)
641 _ Fast-mode Plus (up to 1 MHz)
642 _ 7-bit and 10-bit addressing mode
643 _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
644 _ All 7-bit addresses acknowledge mode
646 _ Programmable setup and hold times
647 _ Easy to use event management
648 _ Optional clock stretching
651 config SYS_I2C_SUN6I_P2WI
652 bool "Allwinner sun6i P2WI controller"
653 depends on ARCH_SUNXI
655 Support for the P2WI (Push/Pull 2 Wire Interface) controller embedded
656 in the Allwinner A31 and A31s SOCs. This interface is used to connect
657 to specific devices like the X-Powers AXP221 PMIC.
659 config SYS_I2C_SUN8I_RSB
660 bool "Allwinner sun8i Reduced Serial Bus controller"
661 depends on ARCH_SUNXI
663 Support for Allwinner's Reduced Serial Bus (RSB) controller. This
664 controller is responsible for communicating with various RSB based
665 devices, such as X-Powers AXPxxx PMICs and AC100/AC200 CODEC ICs.
667 config SYS_I2C_SYNQUACER
668 bool "Socionext SynQuacer I2C controller"
669 depends on ARCH_SYNQUACER && DM_I2C
671 Support for Socionext Synquacer I2C controller. This I2C controller
672 will be used for RTC and LS-connector on DeveloperBox.
675 bool "NVIDIA Tegra internal I2C controller"
676 depends on ARCH_TEGRA
678 Support for NVIDIA I2C controller available in Tegra SoCs.
680 config SYS_I2C_UNIPHIER
681 bool "UniPhier I2C driver"
682 depends on ARCH_UNIPHIER && DM_I2C
685 Support for UniPhier I2C controller driver. This I2C controller
686 is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
688 config SYS_I2C_UNIPHIER_F
689 bool "UniPhier FIFO-builtin I2C driver"
690 depends on ARCH_UNIPHIER && DM_I2C
693 Support for UniPhier FIFO-builtin I2C controller driver.
694 This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
696 config SYS_I2C_VERSATILE
697 bool "Arm Ltd Versatile I2C bus driver"
698 depends on DM_I2C && TARGET_VEXPRESS64_JUNO
700 Add support for the Arm Ltd Versatile Express I2C driver. The I2C host
701 controller is present in the development boards manufactured by Arm Ltd.
704 bool "Marvell PXA (Armada 3720) I2C driver"
706 Support for PXA based I2C controller used on Armada 3720 SoC.
707 In Linux, this driver is called i2c-pxa.
709 config SYS_I2C_MVTWSI
710 bool "Marvell I2C driver"
712 Support for Marvell I2C controllers as used on the orion5x and
713 kirkwood SoC families.
715 config TEGRA186_BPMP_I2C
716 bool "Enable Tegra186 BPMP-based I2C driver"
717 depends on TEGRA186_BPMP
719 Support for Tegra I2C controllers managed by the BPMP (Boot and
720 Power Management Processor). On Tegra186, some I2C controllers are
721 directly controlled by the main CPU, whereas others are controlled
722 by the BPMP, and can only be accessed by the main CPU via IPC
723 requests to the BPMP. This driver covers the latter case.
726 hex "I2C Slave address channel (all buses)"
727 depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
730 I2C Slave address channel 0 for all buses in the legacy drivers.
731 Many boards/controllers/drivers don't support an I2C slave
732 interface so provide a default slave address for them for use in
733 common code. A real value for CONFIG_SYS_I2C_SLAVE should be
734 defined for any board which does support a slave interface and
735 this default used otherwise.
738 int "I2C Slave channel 0 speed (all buses)"
739 depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
742 I2C Slave speed channel 0 for all buses in the legacy drivers.
744 config SYS_I2C_BUS_MAX
746 depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
748 default 3 if OMAP34XX || AM33XX || AM43XX
749 default 4 if ARCH_SOCFPGA || OMAP44XX
750 default 5 if OMAP54XX
752 Define the maximum number of available I2C buses.
754 config SYS_I2C_XILINX_XIIC
755 bool "Xilinx AXI I2C driver"
758 Support for Xilinx AXI I2C controller.
761 bool "gdsys IHS I2C driver"
764 Support for gdsys IHS I2C driver on FPGA bus.
766 source "drivers/i2c/muxes/Kconfig"