drivers/hwmon/tmp513.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Driver for Texas Instruments TMP512, TMP513 power monitor chips
   4  *
   5  * TMP513:
   6  * Thermal/Power Management with Triple Remote and
   7  * Local Temperature Sensor and Current Shunt Monitor
   8  * Datasheet: https://www.ti.com/lit/gpn/tmp513
   9  *
  10  * TMP512:
  11  * Thermal/Power Management with Dual Remote
  12  *      and Local Temperature Sensor and Current Shunt Monitor
  13  * Datasheet: https://www.ti.com/lit/gpn/tmp512
  14  *
  15  * Copyright (C) 2019 Eric Tremblay <etremblay@distech-controls.com>
  16  *
  17  * This program is free software; you can redistribute it and/or modify
  18  * it under the terms of the GNU General Public License as published by
  19  * the Free Software Foundation; version 2 of the License.
  20  */
  21
  22 #include <linux/err.h>
  23 #include <linux/hwmon.h>
  24 #include <linux/i2c.h>
  25 #include <linux/init.h>
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28 #include <linux/regmap.h>
  29 #include <linux/slab.h>
  30 #include <linux/util_macros.h>
  31
  32 // Common register definition
  33 #define TMP51X_SHUNT_CONFIG             0x00
  34 #define TMP51X_TEMP_CONFIG              0x01
  35 #define TMP51X_STATUS                   0x02
  36 #define TMP51X_SMBUS_ALERT              0x03
  37 #define TMP51X_SHUNT_CURRENT_RESULT     0x04
  38 #define TMP51X_BUS_VOLTAGE_RESULT       0x05
  39 #define TMP51X_POWER_RESULT             0x06
  40 #define TMP51X_BUS_CURRENT_RESULT       0x07
  41 #define TMP51X_LOCAL_TEMP_RESULT        0x08
  42 #define TMP51X_REMOTE_TEMP_RESULT_1     0x09
  43 #define TMP51X_REMOTE_TEMP_RESULT_2     0x0A
  44 #define TMP51X_SHUNT_CURRENT_H_LIMIT    0x0C
  45 #define TMP51X_SHUNT_CURRENT_L_LIMIT    0x0D
  46 #define TMP51X_BUS_VOLTAGE_H_LIMIT      0x0E
  47 #define TMP51X_BUS_VOLTAGE_L_LIMIT      0x0F
  48 #define TMP51X_POWER_LIMIT              0x10
  49 #define TMP51X_LOCAL_TEMP_LIMIT 0x11
  50 #define TMP51X_REMOTE_TEMP_LIMIT_1      0x12
  51 #define TMP51X_REMOTE_TEMP_LIMIT_2      0x13
  52 #define TMP51X_SHUNT_CALIBRATION        0x15
  53 #define TMP51X_N_FACTOR_AND_HYST_1      0x16
  54 #define TMP51X_N_FACTOR_2               0x17
  55 #define TMP51X_MAN_ID_REG               0xFE
  56 #define TMP51X_DEVICE_ID_REG            0xFF
  57
  58 // TMP513 specific register definition
  59 #define TMP513_REMOTE_TEMP_RESULT_3     0x0B
  60 #define TMP513_REMOTE_TEMP_LIMIT_3      0x14
  61 #define TMP513_N_FACTOR_3               0x18
  62
  63 // Common attrs, and NULL
  64 #define TMP51X_MANUFACTURER_ID          0x55FF
  65
  66 #define TMP512_DEVICE_ID                0x22FF
  67 #define TMP513_DEVICE_ID                0x23FF
  68
  69 // Default config
  70 #define TMP51X_SHUNT_CONFIG_DEFAULT     0x399F
  71 #define TMP51X_SHUNT_VALUE_DEFAULT      1000
  72 #define TMP51X_VBUS_RANGE_DEFAULT       TMP51X_VBUS_RANGE_32V
  73 #define TMP51X_PGA_DEFAULT              8
  74 #define TMP51X_MAX_REGISTER_ADDR        0xFF
  75
  76 #define TMP512_TEMP_CONFIG_DEFAULT      0xBF80
  77 #define TMP513_TEMP_CONFIG_DEFAULT      0xFF80
  78
  79 // Mask and shift
  80 #define CURRENT_SENSE_VOLTAGE_320_MASK  0x1800
  81 #define CURRENT_SENSE_VOLTAGE_160_MASK  0x1000
  82 #define CURRENT_SENSE_VOLTAGE_80_MASK   0x0800
  83 #define CURRENT_SENSE_VOLTAGE_40_MASK   0
  84
  85 #define TMP51X_BUS_VOLTAGE_MASK         0x2000
  86 #define TMP51X_NFACTOR_MASK             0xFF00
  87 #define TMP51X_HYST_MASK                0x00FF
  88
  89 #define TMP51X_BUS_VOLTAGE_SHIFT        3
  90 #define TMP51X_TEMP_SHIFT               3
  91
  92 // Alarms
  93 #define TMP51X_SHUNT_CURRENT_H_LIMIT_POS        15
  94 #define TMP51X_SHUNT_CURRENT_L_LIMIT_POS        14
  95 #define TMP51X_BUS_VOLTAGE_H_LIMIT_POS          13
  96 #define TMP51X_BUS_VOLTAGE_L_LIMIT_POS          12
  97 #define TMP51X_POWER_LIMIT_POS                  11
  98 #define TMP51X_LOCAL_TEMP_LIMIT_POS             10
  99 #define TMP51X_REMOTE_TEMP_LIMIT_1_POS          9
 100 #define TMP51X_REMOTE_TEMP_LIMIT_2_POS          8
 101 #define TMP513_REMOTE_TEMP_LIMIT_3_POS          7
 102
 103 #define TMP51X_VBUS_RANGE_32V           32000000
 104 #define TMP51X_VBUS_RANGE_16V           16000000
 105
 106 // Max and Min value
 107 #define MAX_BUS_VOLTAGE_32_LIMIT        32764
 108 #define MAX_BUS_VOLTAGE_16_LIMIT        16382
 109
 110 // Max possible value is -256 to +256 but datasheet indicated -40 to 125.
 111 #define MAX_TEMP_LIMIT                  125000
 112 #define MIN_TEMP_LIMIT                  -40000
 113
 114 #define MAX_TEMP_HYST                   127500
 115
 116 static const u8 TMP51X_TEMP_INPUT[4] = {
 117         TMP51X_LOCAL_TEMP_RESULT,
 118         TMP51X_REMOTE_TEMP_RESULT_1,
 119         TMP51X_REMOTE_TEMP_RESULT_2,
 120         TMP513_REMOTE_TEMP_RESULT_3
 121 };
 122
 123 static const u8 TMP51X_TEMP_CRIT[4] = {
 124         TMP51X_LOCAL_TEMP_LIMIT,
 125         TMP51X_REMOTE_TEMP_LIMIT_1,
 126         TMP51X_REMOTE_TEMP_LIMIT_2,
 127         TMP513_REMOTE_TEMP_LIMIT_3
 128 };
 129
 130 static const u8 TMP51X_TEMP_CRIT_ALARM[4] = {
 131         TMP51X_LOCAL_TEMP_LIMIT_POS,
 132         TMP51X_REMOTE_TEMP_LIMIT_1_POS,
 133         TMP51X_REMOTE_TEMP_LIMIT_2_POS,
 134         TMP513_REMOTE_TEMP_LIMIT_3_POS
 135 };
 136
 137 static const u8 TMP51X_TEMP_CRIT_HYST[4] = {
 138         TMP51X_N_FACTOR_AND_HYST_1,
 139         TMP51X_N_FACTOR_AND_HYST_1,
 140         TMP51X_N_FACTOR_AND_HYST_1,
 141         TMP51X_N_FACTOR_AND_HYST_1
 142 };
 143
 144 static const u8 TMP51X_CURR_INPUT[2] = {
 145         TMP51X_SHUNT_CURRENT_RESULT,
 146         TMP51X_BUS_CURRENT_RESULT
 147 };
 148
 149 static struct regmap_config tmp51x_regmap_config = {
 150         .reg_bits = 8,
 151         .val_bits = 16,
 152         .max_register = TMP51X_MAX_REGISTER_ADDR,
 153 };
 154
 155 enum tmp51x_ids {
 156         tmp512, tmp513
 157 };
 158
 159 struct tmp51x_data {
 160         u16 shunt_config;
 161         u16 pga_gain;
 162         u32 vbus_range_uvolt;
 163
 164         u16 temp_config;
 165         u32 nfactor[3];
 166
 167         u32 shunt_uohms;
 168
 169         u32 curr_lsb_ua;
 170         u32 pwr_lsb_uw;
 171
 172         enum tmp51x_ids id;
 173         struct regmap *regmap;
 174 };
 175
 176 // Set the shift based on the gain 8=4, 4=3, 2=2, 1=1
 177 static inline u8 tmp51x_get_pga_shift(struct tmp51x_data *data)
 178 {
 179         return 5 - ffs(data->pga_gain);
 180 }
 181
 182 static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos,
 183                             unsigned int regval, long *val)
 184 {
 185         switch (reg) {
 186         case TMP51X_STATUS:
 187                 *val = (regval >> pos) & 1;
 188                 break;
 189         case TMP51X_SHUNT_CURRENT_RESULT:
 190         case TMP51X_SHUNT_CURRENT_H_LIMIT:
 191         case TMP51X_SHUNT_CURRENT_L_LIMIT:
 192                 /*
 193                  * The valus is read in voltage in the chip but reported as
 194                  * current to the user.
 195                  * 2's complement number shifted by one to four depending
 196                  * on the pga gain setting. 1lsb = 10uV
 197                  */
 198                 *val = sign_extend32(regval, 17 - tmp51x_get_pga_shift(data));
 199                 *val = DIV_ROUND_CLOSEST(*val * 10000, data->shunt_uohms);
 200                 break;
 201         case TMP51X_BUS_VOLTAGE_RESULT:
 202         case TMP51X_BUS_VOLTAGE_H_LIMIT:
 203         case TMP51X_BUS_VOLTAGE_L_LIMIT:
 204                 // 1lsb = 4mV
 205                 *val = (regval >> TMP51X_BUS_VOLTAGE_SHIFT) * 4;
 206                 break;
 207         case TMP51X_POWER_RESULT:
 208         case TMP51X_POWER_LIMIT:
 209                 // Power = (current * BusVoltage) / 5000
 210                 *val = regval * data->pwr_lsb_uw;
 211                 break;
 212         case TMP51X_BUS_CURRENT_RESULT:
 213                 // Current = (ShuntVoltage * CalibrationRegister) / 4096
 214                 *val = sign_extend32(regval, 16) * data->curr_lsb_ua;
 215                 *val = DIV_ROUND_CLOSEST(*val, 1000);
 216                 break;
 217         case TMP51X_LOCAL_TEMP_RESULT:
 218         case TMP51X_REMOTE_TEMP_RESULT_1:
 219         case TMP51X_REMOTE_TEMP_RESULT_2:
 220         case TMP513_REMOTE_TEMP_RESULT_3:
 221         case TMP51X_LOCAL_TEMP_LIMIT:
 222         case TMP51X_REMOTE_TEMP_LIMIT_1:
 223         case TMP51X_REMOTE_TEMP_LIMIT_2:
 224         case TMP513_REMOTE_TEMP_LIMIT_3:
 225                 // 1lsb = 0.0625 degrees centigrade
 226                 *val = sign_extend32(regval, 16) >> TMP51X_TEMP_SHIFT;
 227                 *val = DIV_ROUND_CLOSEST(*val * 625, 10);
 228                 break;
 229         case TMP51X_N_FACTOR_AND_HYST_1:
 230                 // 1lsb = 0.5 degrees centigrade
 231                 *val = (regval & TMP51X_HYST_MASK) * 500;
 232                 break;
 233         default:
 234                 // Programmer goofed
 235                 WARN_ON_ONCE(1);
 236                 *val = 0;
 237                 return -EOPNOTSUPP;
 238         }
 239
 240         return 0;
 241 }
 242
 243 static int tmp51x_set_value(struct tmp51x_data *data, u8 reg, long val)
 244 {
 245         int regval, max_val;
 246         u32 mask = 0;
 247
 248         switch (reg) {
 249         case TMP51X_SHUNT_CURRENT_H_LIMIT:
 250         case TMP51X_SHUNT_CURRENT_L_LIMIT:
 251                 /*
 252                  * The user enter current value and we convert it to
 253                  * voltage. 1lsb = 10uV
 254                  */
 255                 val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10000);
 256                 max_val = U16_MAX >> tmp51x_get_pga_shift(data);
 257                 regval = clamp_val(val, -max_val, max_val);
 258                 break;
 259         case TMP51X_BUS_VOLTAGE_H_LIMIT:
 260         case TMP51X_BUS_VOLTAGE_L_LIMIT:
 261                 // 1lsb = 4mV
 262                 max_val = (data->vbus_range_uvolt == TMP51X_VBUS_RANGE_32V) ?
 263                         MAX_BUS_VOLTAGE_32_LIMIT : MAX_BUS_VOLTAGE_16_LIMIT;
 264
 265                 val = clamp_val(DIV_ROUND_CLOSEST(val, 4), 0, max_val);
 266                 regval = val << TMP51X_BUS_VOLTAGE_SHIFT;
 267                 break;
 268         case TMP51X_POWER_LIMIT:
 269                 regval = clamp_val(DIV_ROUND_CLOSEST(val, data->pwr_lsb_uw), 0,
 270                                    U16_MAX);
 271                 break;
 272         case TMP51X_LOCAL_TEMP_LIMIT:
 273         case TMP51X_REMOTE_TEMP_LIMIT_1:
 274         case TMP51X_REMOTE_TEMP_LIMIT_2:
 275         case TMP513_REMOTE_TEMP_LIMIT_3:
 276                 // 1lsb = 0.0625 degrees centigrade
 277                 val = clamp_val(val, MIN_TEMP_LIMIT, MAX_TEMP_LIMIT);
 278                 regval = DIV_ROUND_CLOSEST(val * 10, 625) << TMP51X_TEMP_SHIFT;
 279                 break;
 280         case TMP51X_N_FACTOR_AND_HYST_1:
 281                 // 1lsb = 0.5 degrees centigrade
 282                 val = clamp_val(val, 0, MAX_TEMP_HYST);
 283                 regval = DIV_ROUND_CLOSEST(val, 500);
 284                 mask = TMP51X_HYST_MASK;
 285                 break;
 286         default:
 287                 // Programmer goofed
 288                 WARN_ON_ONCE(1);
 289                 return -EOPNOTSUPP;
 290         }
 291
 292         if (mask == 0)
 293                 return regmap_write(data->regmap, reg, regval);
 294         else
 295                 return regmap_update_bits(data->regmap, reg, mask, regval);
 296 }
 297
 298 static u8 tmp51x_get_reg(enum hwmon_sensor_types type, u32 attr, int channel)
 299 {
 300         switch (type) {
 301         case hwmon_temp:
 302                 switch (attr) {
 303                 case hwmon_temp_input:
 304                         return TMP51X_TEMP_INPUT[channel];
 305                 case hwmon_temp_crit_alarm:
 306                         return TMP51X_STATUS;
 307                 case hwmon_temp_crit:
 308                         return TMP51X_TEMP_CRIT[channel];
 309                 case hwmon_temp_crit_hyst:
 310                         return TMP51X_TEMP_CRIT_HYST[channel];
 311                 }
 312                 break;
 313         case hwmon_in:
 314                 switch (attr) {
 315                 case hwmon_in_input:
 316                         return TMP51X_BUS_VOLTAGE_RESULT;
 317                 case hwmon_in_lcrit_alarm:
 318                 case hwmon_in_crit_alarm:
 319                         return TMP51X_STATUS;
 320                 case hwmon_in_lcrit:
 321                         return TMP51X_BUS_VOLTAGE_L_LIMIT;
 322                 case hwmon_in_crit:
 323                         return TMP51X_BUS_VOLTAGE_H_LIMIT;
 324                 }
 325                 break;
 326         case hwmon_curr:
 327                 switch (attr) {
 328                 case hwmon_curr_input:
 329                         return TMP51X_CURR_INPUT[channel];
 330                 case hwmon_curr_lcrit_alarm:
 331                 case hwmon_curr_crit_alarm:
 332                         return TMP51X_STATUS;
 333                 case hwmon_curr_lcrit:
 334                         return TMP51X_SHUNT_CURRENT_L_LIMIT;
 335                 case hwmon_curr_crit:
 336                         return TMP51X_SHUNT_CURRENT_H_LIMIT;
 337                 }
 338                 break;
 339         case hwmon_power:
 340                 switch (attr) {
 341                 case hwmon_power_input:
 342                         return TMP51X_POWER_RESULT;
 343                 case hwmon_power_crit_alarm:
 344                         return TMP51X_STATUS;
 345                 case hwmon_power_crit:
 346                         return TMP51X_POWER_LIMIT;
 347                 }
 348                 break;
 349         default:
 350                 break;
 351         }
 352
 353         return 0;
 354 }
 355
 356 static u8 tmp51x_get_status_pos(enum hwmon_sensor_types type, u32 attr,
 357                                 int channel)
 358 {
 359         switch (type) {
 360         case hwmon_temp:
 361                 switch (attr) {
 362                 case hwmon_temp_crit_alarm:
 363                         return TMP51X_TEMP_CRIT_ALARM[channel];
 364                 }
 365                 break;
 366         case hwmon_in:
 367                 switch (attr) {
 368                 case hwmon_in_lcrit_alarm:
 369                         return TMP51X_BUS_VOLTAGE_L_LIMIT_POS;
 370                 case hwmon_in_crit_alarm:
 371                         return TMP51X_BUS_VOLTAGE_H_LIMIT_POS;
 372                 }
 373                 break;
 374         case hwmon_curr:
 375                 switch (attr) {
 376                 case hwmon_curr_lcrit_alarm:
 377                         return TMP51X_SHUNT_CURRENT_L_LIMIT_POS;
 378                 case hwmon_curr_crit_alarm:
 379                         return TMP51X_SHUNT_CURRENT_H_LIMIT_POS;
 380                 }
 381                 break;
 382         case hwmon_power:
 383                 switch (attr) {
 384                 case hwmon_power_crit_alarm:
 385                         return TMP51X_POWER_LIMIT_POS;
 386                 }
 387                 break;
 388         default:
 389                 break;
 390         }
 391
 392         return 0;
 393 }
 394
 395 static int tmp51x_read(struct device *dev, enum hwmon_sensor_types type,
 396                        u32 attr, int channel, long *val)
 397 {
 398         struct tmp51x_data *data = dev_get_drvdata(dev);
 399         int ret;
 400         u32 regval;
 401         u8 pos = 0, reg = 0;
 402
 403         reg = tmp51x_get_reg(type, attr, channel);
 404         if (reg == 0)
 405                 return -EOPNOTSUPP;
 406
 407         if (reg == TMP51X_STATUS)
 408                 pos = tmp51x_get_status_pos(type, attr, channel);
 409
 410         ret = regmap_read(data->regmap, reg, &regval);
 411         if (ret < 0)
 412                 return ret;
 413
 414         return tmp51x_get_value(data, reg, pos, regval, val);
 415 }
 416
 417 static int tmp51x_write(struct device *dev, enum hwmon_sensor_types type,
 418                         u32 attr, int channel, long val)
 419 {
 420         u8 reg = 0;
 421
 422         reg = tmp51x_get_reg(type, attr, channel);
 423         if (reg == 0)
 424                 return -EOPNOTSUPP;
 425
 426         return tmp51x_set_value(dev_get_drvdata(dev), reg, val);
 427 }
 428
 429 static umode_t tmp51x_is_visible(const void *_data,
 430                                  enum hwmon_sensor_types type, u32 attr,
 431                                  int channel)
 432 {
 433         const struct tmp51x_data *data = _data;
 434
 435         switch (type) {
 436         case hwmon_temp:
 437                 if (data->id == tmp512 && channel == 3)
 438                         return 0;
 439                 switch (attr) {
 440                 case hwmon_temp_input:
 441                 case hwmon_temp_crit_alarm:
 442                         return 0444;
 443                 case hwmon_temp_crit:
 444                         return 0644;
 445                 case hwmon_temp_crit_hyst:
 446                         if (channel == 0)
 447                                 return 0644;
 448                         return 0444;
 449                 }
 450                 break;
 451         case hwmon_in:
 452                 switch (attr) {
 453                 case hwmon_in_input:
 454                 case hwmon_in_lcrit_alarm:
 455                 case hwmon_in_crit_alarm:
 456                         return 0444;
 457                 case hwmon_in_lcrit:
 458                 case hwmon_in_crit:
 459                         return 0644;
 460                 }
 461                 break;
 462         case hwmon_curr:
 463                 if (!data->shunt_uohms)
 464                         return 0;
 465
 466                 switch (attr) {
 467                 case hwmon_curr_input:
 468                 case hwmon_curr_lcrit_alarm:
 469                 case hwmon_curr_crit_alarm:
 470                         return 0444;
 471                 case hwmon_curr_lcrit:
 472                 case hwmon_curr_crit:
 473                         return 0644;
 474                 }
 475                 break;
 476         case hwmon_power:
 477                 if (!data->shunt_uohms)
 478                         return 0;
 479
 480                 switch (attr) {
 481                 case hwmon_power_input:
 482                 case hwmon_power_crit_alarm:
 483                         return 0444;
 484                 case hwmon_power_crit:
 485                         return 0644;
 486                 }
 487                 break;
 488         default:
 489                 break;
 490         }
 491         return 0;
 492 }
 493
 494 static const struct hwmon_channel_info * const tmp51x_info[] = {
 495         HWMON_CHANNEL_INFO(temp,
 496                            HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
 497                            HWMON_T_CRIT_HYST,
 498                            HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
 499                            HWMON_T_CRIT_HYST,
 500                            HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
 501                            HWMON_T_CRIT_HYST,
 502                            HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
 503                            HWMON_T_CRIT_HYST),
 504         HWMON_CHANNEL_INFO(in,
 505                            HWMON_I_INPUT | HWMON_I_LCRIT | HWMON_I_LCRIT_ALARM |
 506                            HWMON_I_CRIT | HWMON_I_CRIT_ALARM),
 507         HWMON_CHANNEL_INFO(curr,
 508                            HWMON_C_INPUT | HWMON_C_LCRIT | HWMON_C_LCRIT_ALARM |
 509                            HWMON_C_CRIT | HWMON_C_CRIT_ALARM,
 510                            HWMON_C_INPUT),
 511         HWMON_CHANNEL_INFO(power,
 512                            HWMON_P_INPUT | HWMON_P_CRIT | HWMON_P_CRIT_ALARM),
 513         NULL
 514 };
 515
 516 static const struct hwmon_ops tmp51x_hwmon_ops = {
 517         .is_visible = tmp51x_is_visible,
 518         .read = tmp51x_read,
 519         .write = tmp51x_write,
 520 };
 521
 522 static const struct hwmon_chip_info tmp51x_chip_info = {
 523         .ops = &tmp51x_hwmon_ops,
 524         .info = tmp51x_info,
 525 };
 526
 527 /*
 528  * Calibrate the tmp51x following the datasheet method
 529  */
 530 static int tmp51x_calibrate(struct tmp51x_data *data)
 531 {
 532         int vshunt_max = data->pga_gain * 40;
 533         u64 max_curr_ma;
 534         u32 div;
 535
 536         /*
 537          * If shunt_uohms is equal to 0, the calibration should be set to 0.
 538          * The consequence will be that the current and power measurement engine
 539          * of the sensor will not work. Temperature and voltage sensing will
 540          * continue to work.
 541          */
 542         if (data->shunt_uohms == 0)
 543                 return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION, 0);
 544
 545         max_curr_ma = DIV_ROUND_CLOSEST_ULL(vshunt_max * 1000 * 1000,
 546                                             data->shunt_uohms);
 547
 548         /*
 549          * Calculate the minimal bit resolution for the current and the power.
 550          * Those values will be used during register interpretation.
 551          */
 552         data->curr_lsb_ua = DIV_ROUND_CLOSEST_ULL(max_curr_ma * 1000, 32767);
 553         data->pwr_lsb_uw = 20 * data->curr_lsb_ua;
 554
 555         div = DIV_ROUND_CLOSEST_ULL(data->curr_lsb_ua * data->shunt_uohms,
 556                                     1000 * 1000);
 557
 558         return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION,
 559                             DIV_ROUND_CLOSEST(40960, div));
 560 }
 561
 562 /*
 563  * Initialize the configuration and calibration registers.
 564  */
 565 static int tmp51x_init(struct tmp51x_data *data)
 566 {
 567         unsigned int regval;
 568         int ret = regmap_write(data->regmap, TMP51X_SHUNT_CONFIG,
 569                                data->shunt_config);
 570         if (ret < 0)
 571                 return ret;
 572
 573         ret = regmap_write(data->regmap, TMP51X_TEMP_CONFIG, data->temp_config);
 574         if (ret < 0)
 575                 return ret;
 576
 577         // nFactor configuration
 578         ret = regmap_update_bits(data->regmap, TMP51X_N_FACTOR_AND_HYST_1,
 579                                  TMP51X_NFACTOR_MASK, data->nfactor[0] << 8);
 580         if (ret < 0)
 581                 return ret;
 582
 583         ret = regmap_write(data->regmap, TMP51X_N_FACTOR_2,
 584                            data->nfactor[1] << 8);
 585         if (ret < 0)
 586                 return ret;
 587
 588         if (data->id == tmp513) {
 589                 ret = regmap_write(data->regmap, TMP513_N_FACTOR_3,
 590                                    data->nfactor[2] << 8);
 591                 if (ret < 0)
 592                         return ret;
 593         }
 594
 595         ret = tmp51x_calibrate(data);
 596         if (ret < 0)
 597                 return ret;
 598
 599         // Read the status register before using as the datasheet propose
 600         return regmap_read(data->regmap, TMP51X_STATUS, &regval);
 601 }
 602
 603 static const struct i2c_device_id tmp51x_id[] = {
 604         { "tmp512", tmp512 },
 605         { "tmp513", tmp513 },
 606         { }
 607 };
 608 MODULE_DEVICE_TABLE(i2c, tmp51x_id);
 609
 610 static const struct of_device_id tmp51x_of_match[] = {
 611         {
 612                 .compatible = "ti,tmp512",
 613                 .data = (void *)tmp512
 614         },
 615         {
 616                 .compatible = "ti,tmp513",
 617                 .data = (void *)tmp513
 618         },
 619         { },
 620 };
 621 MODULE_DEVICE_TABLE(of, tmp51x_of_match);
 622
 623 static int tmp51x_vbus_range_to_reg(struct device *dev,
 624                                     struct tmp51x_data *data)
 625 {
 626         if (data->vbus_range_uvolt == TMP51X_VBUS_RANGE_32V) {
 627                 data->shunt_config |= TMP51X_BUS_VOLTAGE_MASK;
 628         } else if (data->vbus_range_uvolt == TMP51X_VBUS_RANGE_16V) {
 629                 data->shunt_config &= ~TMP51X_BUS_VOLTAGE_MASK;
 630         } else {
 631                 dev_err(dev, "ti,bus-range-microvolt is invalid: %u\n",
 632                         data->vbus_range_uvolt);
 633                 return -EINVAL;
 634         }
 635         return 0;
 636 }
 637
 638 static int tmp51x_pga_gain_to_reg(struct device *dev, struct tmp51x_data *data)
 639 {
 640         if (data->pga_gain == 8) {
 641                 data->shunt_config |= CURRENT_SENSE_VOLTAGE_320_MASK;
 642         } else if (data->pga_gain == 4) {
 643                 data->shunt_config |= CURRENT_SENSE_VOLTAGE_160_MASK;
 644         } else if (data->pga_gain == 2) {
 645                 data->shunt_config |= CURRENT_SENSE_VOLTAGE_80_MASK;
 646         } else if (data->pga_gain == 1) {
 647                 data->shunt_config |= CURRENT_SENSE_VOLTAGE_40_MASK;
 648         } else {
 649                 dev_err(dev, "ti,pga-gain is invalid: %u\n", data->pga_gain);
 650                 return -EINVAL;
 651         }
 652         return 0;
 653 }
 654
 655 static int tmp51x_read_properties(struct device *dev, struct tmp51x_data *data)
 656 {
 657         int ret;
 658         u32 nfactor[3];
 659         u32 val;
 660
 661         ret = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
 662         data->shunt_uohms = (ret >= 0) ? val : TMP51X_SHUNT_VALUE_DEFAULT;
 663
 664         ret = device_property_read_u32(dev, "ti,bus-range-microvolt", &val);
 665         data->vbus_range_uvolt = (ret >= 0) ? val : TMP51X_VBUS_RANGE_DEFAULT;
 666         ret = tmp51x_vbus_range_to_reg(dev, data);
 667         if (ret < 0)
 668                 return ret;
 669
 670         ret = device_property_read_u32(dev, "ti,pga-gain", &val);
 671         data->pga_gain = (ret >= 0) ? val : TMP51X_PGA_DEFAULT;
 672         ret = tmp51x_pga_gain_to_reg(dev, data);
 673         if (ret < 0)
 674                 return ret;
 675
 676         ret = device_property_read_u32_array(dev, "ti,nfactor", nfactor,
 677                                             (data->id == tmp513) ? 3 : 2);
 678         if (ret >= 0)
 679                 memcpy(data->nfactor, nfactor, (data->id == tmp513) ? 3 : 2);
 680
 681         // Check if shunt value is compatible with pga-gain
 682         if (data->shunt_uohms > data->pga_gain * 40 * 1000 * 1000) {
 683                 dev_err(dev, "shunt-resistor: %u too big for pga_gain: %u\n",
 684                         data->shunt_uohms, data->pga_gain);
 685                 return -EINVAL;
 686         }
 687
 688         return 0;
 689 }
 690
 691 static void tmp51x_use_default(struct tmp51x_data *data)
 692 {
 693         data->vbus_range_uvolt = TMP51X_VBUS_RANGE_DEFAULT;
 694         data->pga_gain = TMP51X_PGA_DEFAULT;
 695         data->shunt_uohms = TMP51X_SHUNT_VALUE_DEFAULT;
 696 }
 697
 698 static int tmp51x_configure(struct device *dev, struct tmp51x_data *data)
 699 {
 700         data->shunt_config = TMP51X_SHUNT_CONFIG_DEFAULT;
 701         data->temp_config = (data->id == tmp513) ?
 702                         TMP513_TEMP_CONFIG_DEFAULT : TMP512_TEMP_CONFIG_DEFAULT;
 703
 704         if (dev->of_node)
 705                 return tmp51x_read_properties(dev, data);
 706
 707         tmp51x_use_default(data);
 708
 709         return 0;
 710 }
 711
 712 static int tmp51x_probe(struct i2c_client *client)
 713 {
 714         struct device *dev = &client->dev;
 715         struct tmp51x_data *data;
 716         struct device *hwmon_dev;
 717         int ret;
 718
 719         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 720         if (!data)
 721                 return -ENOMEM;
 722
 723         data->id = (uintptr_t)i2c_get_match_data(client);
 724
 725         ret = tmp51x_configure(dev, data);
 726         if (ret < 0) {
 727                 dev_err(dev, "error configuring the device: %d\n", ret);
 728                 return ret;
 729         }
 730
 731         data->regmap = devm_regmap_init_i2c(client, &tmp51x_regmap_config);
 732         if (IS_ERR(data->regmap)) {
 733                 dev_err(dev, "failed to allocate register map\n");
 734                 return PTR_ERR(data->regmap);
 735         }
 736
 737         ret = tmp51x_init(data);
 738         if (ret < 0) {
 739                 dev_err(dev, "error configuring the device: %d\n", ret);
 740                 return -ENODEV;
 741         }
 742
 743         hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
 744                                                          data,
 745                                                          &tmp51x_chip_info,
 746                                                          NULL);
 747         if (IS_ERR(hwmon_dev))
 748                 return PTR_ERR(hwmon_dev);
 749
 750         dev_dbg(dev, "power monitor %s\n", client->name);
 751
 752         return 0;
 753 }
 754
 755 static struct i2c_driver tmp51x_driver = {
 756         .driver = {
 757                 .name   = "tmp51x",
 758                 .of_match_table = tmp51x_of_match,
 759         },
 760         .probe          = tmp51x_probe,
 761         .id_table       = tmp51x_id,
 762 };
 763
 764 module_i2c_driver(tmp51x_driver);
 765
 766 MODULE_AUTHOR("Eric Tremblay <etremblay@distechcontrols.com>");
 767 MODULE_DESCRIPTION("tmp51x driver");
 768 MODULE_LICENSE("GPL");