drivers/hwmon/smm665.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Driver for SMM665 Power Controller / Monitor
   4  *
   5  * Copyright (C) 2010 Ericsson AB.
   6  *
   7  * This driver should also work for SMM465, SMM764, and SMM766, but is untested
   8  * for those chips. Only monitoring functionality is implemented.
   9  *
  10  * Datasheets:
  11  * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
  12  * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/init.h>
  18 #include <linux/err.h>
  19 #include <linux/slab.h>
  20 #include <linux/i2c.h>
  21 #include <linux/hwmon.h>
  22 #include <linux/hwmon-sysfs.h>
  23 #include <linux/delay.h>
  24 #include <linux/jiffies.h>
  25
  26 /* Internal reference voltage (VREF, x 1000 */
  27 #define SMM665_VREF_ADC_X1000   1250
  28
  29 /* module parameters */
  30 static int vref = SMM665_VREF_ADC_X1000;
  31 module_param(vref, int, 0);
  32 MODULE_PARM_DESC(vref, "Reference voltage in mV");
  33
  34 enum chips { smm465, smm665, smm665c, smm764, smm766 };
  35
  36 /*
  37  * ADC channel addresses
  38  */
  39 #define SMM665_MISC16_ADC_DATA_A        0x00
  40 #define SMM665_MISC16_ADC_DATA_B        0x01
  41 #define SMM665_MISC16_ADC_DATA_C        0x02
  42 #define SMM665_MISC16_ADC_DATA_D        0x03
  43 #define SMM665_MISC16_ADC_DATA_E        0x04
  44 #define SMM665_MISC16_ADC_DATA_F        0x05
  45 #define SMM665_MISC16_ADC_DATA_VDD      0x06
  46 #define SMM665_MISC16_ADC_DATA_12V      0x07
  47 #define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08
  48 #define SMM665_MISC16_ADC_DATA_AIN1     0x09
  49 #define SMM665_MISC16_ADC_DATA_AIN2     0x0a
  50
  51 /*
  52  * Command registers
  53  */
  54 #define SMM665_MISC8_CMD_STS            0x80
  55 #define SMM665_MISC8_STATUS1            0x81
  56 #define SMM665_MISC8_STATUSS2           0x82
  57 #define SMM665_MISC8_IO_POLARITY        0x83
  58 #define SMM665_MISC8_PUP_POLARITY       0x84
  59 #define SMM665_MISC8_ADOC_STATUS1       0x85
  60 #define SMM665_MISC8_ADOC_STATUS2       0x86
  61 #define SMM665_MISC8_WRITE_PROT         0x87
  62 #define SMM665_MISC8_STS_TRACK          0x88
  63
  64 /*
  65  * Configuration registers and register groups
  66  */
  67 #define SMM665_ADOC_ENABLE              0x0d
  68 #define SMM665_LIMIT_BASE               0x80    /* First limit register */
  69
  70 /*
  71  * Limit register bit masks
  72  */
  73 #define SMM665_TRIGGER_RST              0x8000
  74 #define SMM665_TRIGGER_HEALTHY          0x4000
  75 #define SMM665_TRIGGER_POWEROFF         0x2000
  76 #define SMM665_TRIGGER_SHUTDOWN         0x1000
  77 #define SMM665_ADC_MASK                 0x03ff
  78
  79 #define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \
  80                                         | SMM665_TRIGGER_POWEROFF \
  81                                         | SMM665_TRIGGER_SHUTDOWN))
  82 /*
  83  * Fault register bit definitions
  84  * Values are merged from status registers 1/2,
  85  * with status register 1 providing the upper 8 bits.
  86  */
  87 #define SMM665_FAULT_A          0x0001
  88 #define SMM665_FAULT_B          0x0002
  89 #define SMM665_FAULT_C          0x0004
  90 #define SMM665_FAULT_D          0x0008
  91 #define SMM665_FAULT_E          0x0010
  92 #define SMM665_FAULT_F          0x0020
  93 #define SMM665_FAULT_VDD        0x0040
  94 #define SMM665_FAULT_12V        0x0080
  95 #define SMM665_FAULT_TEMP       0x0100
  96 #define SMM665_FAULT_AIN1       0x0200
  97 #define SMM665_FAULT_AIN2       0x0400
  98
  99 /*
 100  * I2C Register addresses
 101  *
 102  * The configuration register needs to be the configured base register.
 103  * The command/status register address is derived from it.
 104  */
 105 #define SMM665_REGMASK          0x78
 106 #define SMM665_CMDREG_BASE      0x48
 107 #define SMM665_CONFREG_BASE     0x50
 108
 109 /*
 110  *  Equations given by chip manufacturer to calculate voltage/temperature values
 111  *  vref = Reference voltage on VREF_ADC pin (module parameter)
 112  *  adc  = 10bit ADC value read back from registers
 113  */
 114
 115 /* Voltage A-F and VDD */
 116 #define SMM665_VMON_ADC_TO_VOLTS(adc)  ((adc) * vref / 256)
 117
 118 /* Voltage 12VIN */
 119 #define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256)
 120
 121 /* Voltage AIN1, AIN2 */
 122 #define SMM665_AIN_ADC_TO_VOLTS(adc)   ((adc) * vref / 512)
 123
 124 /* Temp Sensor */
 125 #define SMM665_TEMP_ADC_TO_CELSIUS(adc) (((adc) <= 511) ?                  \
 126                                          ((int)(adc) * 1000 / 4) :         \
 127                                          (((int)(adc) - 0x400) * 1000 / 4))
 128
 129 #define SMM665_NUM_ADC          11
 130
 131 /*
 132  * Chip dependent ADC conversion time, in uS
 133  */
 134 #define SMM665_ADC_WAIT_SMM665  70
 135 #define SMM665_ADC_WAIT_SMM766  185
 136
 137 struct smm665_data {
 138         enum chips type;
 139         int conversion_time;            /* ADC conversion time */
 140         struct i2c_client *client;
 141         struct mutex update_lock;
 142         bool valid;
 143         unsigned long last_updated;     /* in jiffies */
 144         u16 adc[SMM665_NUM_ADC];        /* adc values (raw) */
 145         u16 faults;                     /* fault status */
 146         /* The following values are in mV */
 147         int critical_min_limit[SMM665_NUM_ADC];
 148         int alarm_min_limit[SMM665_NUM_ADC];
 149         int critical_max_limit[SMM665_NUM_ADC];
 150         int alarm_max_limit[SMM665_NUM_ADC];
 151         struct i2c_client *cmdreg;
 152 };
 153
 154 /*
 155  * smm665_read16()
 156  *
 157  * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>.
 158  */
 159 static int smm665_read16(struct i2c_client *client, int reg)
 160 {
 161         int rv, val;
 162
 163         rv = i2c_smbus_read_byte_data(client, reg);
 164         if (rv < 0)
 165                 return rv;
 166         val = rv << 8;
 167         rv = i2c_smbus_read_byte_data(client, reg + 1);
 168         if (rv < 0)
 169                 return rv;
 170         val |= rv;
 171         return val;
 172 }
 173
 174 /*
 175  * Read adc value.
 176  */
 177 static int smm665_read_adc(struct smm665_data *data, int adc)
 178 {
 179         struct i2c_client *client = data->cmdreg;
 180         int rv;
 181         int radc;
 182
 183         /*
 184          * Algorithm for reading ADC, per SMM665 datasheet
 185          *
 186          *  {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]}
 187          * [wait conversion time]
 188          *  {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]}
 189          *
 190          * To implement the first part of this exchange,
 191          * do a full read transaction and expect a failure/Nack.
 192          * This sets up the address pointer on the SMM665
 193          * and starts the ADC conversion.
 194          * Then do a two-byte read transaction.
 195          */
 196         rv = i2c_smbus_read_byte_data(client, adc << 3);
 197         if (rv != -ENXIO) {
 198                 /*
 199                  * We expect ENXIO to reflect NACK
 200                  * (per Documentation/i2c/fault-codes.rst).
 201                  * Everything else is an error.
 202                  */
 203                 dev_dbg(&client->dev,
 204                         "Unexpected return code %d when setting ADC index", rv);
 205                 return (rv < 0) ? rv : -EIO;
 206         }
 207
 208         udelay(data->conversion_time);
 209
 210         /*
 211          * Now read two bytes.
 212          *
 213          * Neither i2c_smbus_read_byte() nor
 214          * i2c_smbus_read_block_data() worked here,
 215          * so use i2c_smbus_read_word_swapped() instead.
 216          * We could also try to use i2c_master_recv(),
 217          * but that is not always supported.
 218          */
 219         rv = i2c_smbus_read_word_swapped(client, 0);
 220         if (rv < 0) {
 221                 dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
 222                 return rv;
 223         }
 224         /*
 225          * Validate/verify readback adc channel (in bit 11..14).
 226          */
 227         radc = (rv >> 11) & 0x0f;
 228         if (radc != adc) {
 229                 dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
 230                         adc, radc);
 231                 return -EIO;
 232         }
 233
 234         return rv & SMM665_ADC_MASK;
 235 }
 236
 237 static struct smm665_data *smm665_update_device(struct device *dev)
 238 {
 239         struct smm665_data *data = dev_get_drvdata(dev);
 240         struct i2c_client *client = data->client;
 241         struct smm665_data *ret = data;
 242
 243         mutex_lock(&data->update_lock);
 244
 245         if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 246                 int i, val;
 247
 248                 /*
 249                  * read status registers
 250                  */
 251                 val = smm665_read16(client, SMM665_MISC8_STATUS1);
 252                 if (unlikely(val < 0)) {
 253                         ret = ERR_PTR(val);
 254                         goto abort;
 255                 }
 256                 data->faults = val;
 257
 258                 /* Read adc registers */
 259                 for (i = 0; i < SMM665_NUM_ADC; i++) {
 260                         val = smm665_read_adc(data, i);
 261                         if (unlikely(val < 0)) {
 262                                 ret = ERR_PTR(val);
 263                                 goto abort;
 264                         }
 265                         data->adc[i] = val;
 266                 }
 267                 data->last_updated = jiffies;
 268                 data->valid = true;
 269         }
 270 abort:
 271         mutex_unlock(&data->update_lock);
 272         return ret;
 273 }
 274
 275 /* Return converted value from given adc */
 276 static int smm665_convert(u16 adcval, int index)
 277 {
 278         int val = 0;
 279
 280         switch (index) {
 281         case SMM665_MISC16_ADC_DATA_12V:
 282                 val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
 283                 break;
 284
 285         case SMM665_MISC16_ADC_DATA_VDD:
 286         case SMM665_MISC16_ADC_DATA_A:
 287         case SMM665_MISC16_ADC_DATA_B:
 288         case SMM665_MISC16_ADC_DATA_C:
 289         case SMM665_MISC16_ADC_DATA_D:
 290         case SMM665_MISC16_ADC_DATA_E:
 291         case SMM665_MISC16_ADC_DATA_F:
 292                 val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
 293                 break;
 294
 295         case SMM665_MISC16_ADC_DATA_AIN1:
 296         case SMM665_MISC16_ADC_DATA_AIN2:
 297                 val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
 298                 break;
 299
 300         case SMM665_MISC16_ADC_DATA_INT_TEMP:
 301                 val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK);
 302                 break;
 303
 304         default:
 305                 /* If we get here, the developer messed up */
 306                 WARN_ON_ONCE(1);
 307                 break;
 308         }
 309
 310         return val;
 311 }
 312
 313 static int smm665_get_min(struct device *dev, int index)
 314 {
 315         struct smm665_data *data = dev_get_drvdata(dev);
 316
 317         return data->alarm_min_limit[index];
 318 }
 319
 320 static int smm665_get_max(struct device *dev, int index)
 321 {
 322         struct smm665_data *data = dev_get_drvdata(dev);
 323
 324         return data->alarm_max_limit[index];
 325 }
 326
 327 static int smm665_get_lcrit(struct device *dev, int index)
 328 {
 329         struct smm665_data *data = dev_get_drvdata(dev);
 330
 331         return data->critical_min_limit[index];
 332 }
 333
 334 static int smm665_get_crit(struct device *dev, int index)
 335 {
 336         struct smm665_data *data = dev_get_drvdata(dev);
 337
 338         return data->critical_max_limit[index];
 339 }
 340
 341 static ssize_t smm665_show_crit_alarm(struct device *dev,
 342                                       struct device_attribute *da, char *buf)
 343 {
 344         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 345         struct smm665_data *data = smm665_update_device(dev);
 346         int val = 0;
 347
 348         if (IS_ERR(data))
 349                 return PTR_ERR(data);
 350
 351         if (data->faults & (1 << attr->index))
 352                 val = 1;
 353
 354         return sysfs_emit(buf, "%d\n", val);
 355 }
 356
 357 static ssize_t smm665_show_input(struct device *dev,
 358                                  struct device_attribute *da, char *buf)
 359 {
 360         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 361         struct smm665_data *data = smm665_update_device(dev);
 362         int adc = attr->index;
 363         int val;
 364
 365         if (IS_ERR(data))
 366                 return PTR_ERR(data);
 367
 368         val = smm665_convert(data->adc[adc], adc);
 369         return sysfs_emit(buf, "%d\n", val);
 370 }
 371
 372 #define SMM665_SHOW(what) \
 373 static ssize_t smm665_show_##what(struct device *dev, \
 374                                     struct device_attribute *da, char *buf) \
 375 { \
 376         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 377         const int val = smm665_get_##what(dev, attr->index); \
 378         return snprintf(buf, PAGE_SIZE, "%d\n", val); \
 379 }
 380
 381 SMM665_SHOW(min);
 382 SMM665_SHOW(max);
 383 SMM665_SHOW(lcrit);
 384 SMM665_SHOW(crit);
 385
 386 /*
 387  * These macros are used below in constructing device attribute objects
 388  * for use with sysfs_create_group() to make a sysfs device file
 389  * for each register.
 390  */
 391
 392 #define SMM665_ATTR(name, type, cmd_idx) \
 393         static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \
 394                                   smm665_show_##type, NULL, cmd_idx)
 395
 396 /* Construct a sensor_device_attribute structure for each register */
 397
 398 /* Input voltages */
 399 SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V);
 400 SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD);
 401 SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A);
 402 SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B);
 403 SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C);
 404 SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D);
 405 SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E);
 406 SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F);
 407 SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1);
 408 SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2);
 409
 410 /* Input voltages min */
 411 SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V);
 412 SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD);
 413 SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A);
 414 SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B);
 415 SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C);
 416 SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D);
 417 SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E);
 418 SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F);
 419 SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1);
 420 SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2);
 421
 422 /* Input voltages max */
 423 SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V);
 424 SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD);
 425 SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A);
 426 SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B);
 427 SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C);
 428 SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D);
 429 SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E);
 430 SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F);
 431 SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1);
 432 SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2);
 433
 434 /* Input voltages lcrit */
 435 SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V);
 436 SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD);
 437 SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A);
 438 SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B);
 439 SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C);
 440 SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D);
 441 SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E);
 442 SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F);
 443 SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1);
 444 SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2);
 445
 446 /* Input voltages crit */
 447 SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V);
 448 SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD);
 449 SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A);
 450 SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B);
 451 SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C);
 452 SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D);
 453 SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E);
 454 SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F);
 455 SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1);
 456 SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2);
 457
 458 /* critical alarms */
 459 SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V);
 460 SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD);
 461 SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A);
 462 SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B);
 463 SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C);
 464 SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D);
 465 SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E);
 466 SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F);
 467 SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1);
 468 SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2);
 469
 470 /* Temperature */
 471 SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP);
 472 SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP);
 473 SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP);
 474 SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP);
 475 SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP);
 476 SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP);
 477
 478 /*
 479  * Finally, construct an array of pointers to members of the above objects,
 480  * as required for sysfs_create_group()
 481  */
 482 static struct attribute *smm665_attrs[] = {
 483         &sensor_dev_attr_in1_input.dev_attr.attr,
 484         &sensor_dev_attr_in1_min.dev_attr.attr,
 485         &sensor_dev_attr_in1_max.dev_attr.attr,
 486         &sensor_dev_attr_in1_lcrit.dev_attr.attr,
 487         &sensor_dev_attr_in1_crit.dev_attr.attr,
 488         &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
 489
 490         &sensor_dev_attr_in2_input.dev_attr.attr,
 491         &sensor_dev_attr_in2_min.dev_attr.attr,
 492         &sensor_dev_attr_in2_max.dev_attr.attr,
 493         &sensor_dev_attr_in2_lcrit.dev_attr.attr,
 494         &sensor_dev_attr_in2_crit.dev_attr.attr,
 495         &sensor_dev_attr_in2_crit_alarm.dev_attr.attr,
 496
 497         &sensor_dev_attr_in3_input.dev_attr.attr,
 498         &sensor_dev_attr_in3_min.dev_attr.attr,
 499         &sensor_dev_attr_in3_max.dev_attr.attr,
 500         &sensor_dev_attr_in3_lcrit.dev_attr.attr,
 501         &sensor_dev_attr_in3_crit.dev_attr.attr,
 502         &sensor_dev_attr_in3_crit_alarm.dev_attr.attr,
 503
 504         &sensor_dev_attr_in4_input.dev_attr.attr,
 505         &sensor_dev_attr_in4_min.dev_attr.attr,
 506         &sensor_dev_attr_in4_max.dev_attr.attr,
 507         &sensor_dev_attr_in4_lcrit.dev_attr.attr,
 508         &sensor_dev_attr_in4_crit.dev_attr.attr,
 509         &sensor_dev_attr_in4_crit_alarm.dev_attr.attr,
 510
 511         &sensor_dev_attr_in5_input.dev_attr.attr,
 512         &sensor_dev_attr_in5_min.dev_attr.attr,
 513         &sensor_dev_attr_in5_max.dev_attr.attr,
 514         &sensor_dev_attr_in5_lcrit.dev_attr.attr,
 515         &sensor_dev_attr_in5_crit.dev_attr.attr,
 516         &sensor_dev_attr_in5_crit_alarm.dev_attr.attr,
 517
 518         &sensor_dev_attr_in6_input.dev_attr.attr,
 519         &sensor_dev_attr_in6_min.dev_attr.attr,
 520         &sensor_dev_attr_in6_max.dev_attr.attr,
 521         &sensor_dev_attr_in6_lcrit.dev_attr.attr,
 522         &sensor_dev_attr_in6_crit.dev_attr.attr,
 523         &sensor_dev_attr_in6_crit_alarm.dev_attr.attr,
 524
 525         &sensor_dev_attr_in7_input.dev_attr.attr,
 526         &sensor_dev_attr_in7_min.dev_attr.attr,
 527         &sensor_dev_attr_in7_max.dev_attr.attr,
 528         &sensor_dev_attr_in7_lcrit.dev_attr.attr,
 529         &sensor_dev_attr_in7_crit.dev_attr.attr,
 530         &sensor_dev_attr_in7_crit_alarm.dev_attr.attr,
 531
 532         &sensor_dev_attr_in8_input.dev_attr.attr,
 533         &sensor_dev_attr_in8_min.dev_attr.attr,
 534         &sensor_dev_attr_in8_max.dev_attr.attr,
 535         &sensor_dev_attr_in8_lcrit.dev_attr.attr,
 536         &sensor_dev_attr_in8_crit.dev_attr.attr,
 537         &sensor_dev_attr_in8_crit_alarm.dev_attr.attr,
 538
 539         &sensor_dev_attr_in9_input.dev_attr.attr,
 540         &sensor_dev_attr_in9_min.dev_attr.attr,
 541         &sensor_dev_attr_in9_max.dev_attr.attr,
 542         &sensor_dev_attr_in9_lcrit.dev_attr.attr,
 543         &sensor_dev_attr_in9_crit.dev_attr.attr,
 544         &sensor_dev_attr_in9_crit_alarm.dev_attr.attr,
 545
 546         &sensor_dev_attr_in10_input.dev_attr.attr,
 547         &sensor_dev_attr_in10_min.dev_attr.attr,
 548         &sensor_dev_attr_in10_max.dev_attr.attr,
 549         &sensor_dev_attr_in10_lcrit.dev_attr.attr,
 550         &sensor_dev_attr_in10_crit.dev_attr.attr,
 551         &sensor_dev_attr_in10_crit_alarm.dev_attr.attr,
 552
 553         &sensor_dev_attr_temp1_input.dev_attr.attr,
 554         &sensor_dev_attr_temp1_min.dev_attr.attr,
 555         &sensor_dev_attr_temp1_max.dev_attr.attr,
 556         &sensor_dev_attr_temp1_lcrit.dev_attr.attr,
 557         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 558         &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 559
 560         NULL,
 561 };
 562
 563 ATTRIBUTE_GROUPS(smm665);
 564
 565 static const struct i2c_device_id smm665_id[];
 566
 567 static int smm665_probe(struct i2c_client *client)
 568 {
 569         struct i2c_adapter *adapter = client->adapter;
 570         struct smm665_data *data;
 571         struct device *hwmon_dev;
 572         int i, ret;
 573
 574         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 575                                      | I2C_FUNC_SMBUS_WORD_DATA))
 576                 return -ENODEV;
 577
 578         if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0)
 579                 return -ENODEV;
 580
 581         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 582         if (!data)
 583                 return -ENOMEM;
 584
 585         i2c_set_clientdata(client, data);
 586         mutex_init(&data->update_lock);
 587
 588         data->client = client;
 589         data->type = i2c_match_id(smm665_id, client)->driver_data;
 590         data->cmdreg = i2c_new_dummy_device(adapter, (client->addr & ~SMM665_REGMASK)
 591                                      | SMM665_CMDREG_BASE);
 592         if (IS_ERR(data->cmdreg))
 593                 return PTR_ERR(data->cmdreg);
 594
 595         switch (data->type) {
 596         case smm465:
 597         case smm665:
 598                 data->conversion_time = SMM665_ADC_WAIT_SMM665;
 599                 break;
 600         case smm665c:
 601         case smm764:
 602         case smm766:
 603                 data->conversion_time = SMM665_ADC_WAIT_SMM766;
 604                 break;
 605         }
 606
 607         ret = -ENODEV;
 608         if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0)
 609                 goto out_unregister;
 610
 611         /*
 612          * Read limits.
 613          *
 614          * Limit registers start with register SMM665_LIMIT_BASE.
 615          * Each channel uses 8 registers, providing four limit values
 616          * per channel. Each limit value requires two registers, with the
 617          * high byte in the first register and the low byte in the second
 618          * register. The first two limits are under limit values, followed
 619          * by two over limit values.
 620          *
 621          * Limit register order matches the ADC register order, so we use
 622          * ADC register defines throughout the code to index limit registers.
 623          *
 624          * We save the first retrieved value both as "critical" and "alarm"
 625          * value. The second value overwrites either the critical or the
 626          * alarm value, depending on its configuration. This ensures that both
 627          * critical and alarm values are initialized, even if both registers are
 628          * configured as critical or non-critical.
 629          */
 630         for (i = 0; i < SMM665_NUM_ADC; i++) {
 631                 int val;
 632
 633                 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8);
 634                 if (unlikely(val < 0))
 635                         goto out_unregister;
 636                 data->critical_min_limit[i] = data->alarm_min_limit[i]
 637                   = smm665_convert(val, i);
 638                 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2);
 639                 if (unlikely(val < 0))
 640                         goto out_unregister;
 641                 if (smm665_is_critical(val))
 642                         data->critical_min_limit[i] = smm665_convert(val, i);
 643                 else
 644                         data->alarm_min_limit[i] = smm665_convert(val, i);
 645                 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4);
 646                 if (unlikely(val < 0))
 647                         goto out_unregister;
 648                 data->critical_max_limit[i] = data->alarm_max_limit[i]
 649                   = smm665_convert(val, i);
 650                 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6);
 651                 if (unlikely(val < 0))
 652                         goto out_unregister;
 653                 if (smm665_is_critical(val))
 654                         data->critical_max_limit[i] = smm665_convert(val, i);
 655                 else
 656                         data->alarm_max_limit[i] = smm665_convert(val, i);
 657         }
 658
 659         hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
 660                                                            client->name, data,
 661                                                            smm665_groups);
 662         if (IS_ERR(hwmon_dev)) {
 663                 ret = PTR_ERR(hwmon_dev);
 664                 goto out_unregister;
 665         }
 666
 667         return 0;
 668
 669 out_unregister:
 670         i2c_unregister_device(data->cmdreg);
 671         return ret;
 672 }
 673
 674 static void smm665_remove(struct i2c_client *client)
 675 {
 676         struct smm665_data *data = i2c_get_clientdata(client);
 677
 678         i2c_unregister_device(data->cmdreg);
 679 }
 680
 681 static const struct i2c_device_id smm665_id[] = {
 682         {"smm465", smm465},
 683         {"smm665", smm665},
 684         {"smm665c", smm665c},
 685         {"smm764", smm764},
 686         {"smm766", smm766},
 687         {}
 688 };
 689
 690 MODULE_DEVICE_TABLE(i2c, smm665_id);
 691
 692 /* This is the driver that will be inserted */
 693 static struct i2c_driver smm665_driver = {
 694         .driver = {
 695                    .name = "smm665",
 696                    },
 697         .probe_new = smm665_probe,
 698         .remove = smm665_remove,
 699         .id_table = smm665_id,
 700 };
 701
 702 module_i2c_driver(smm665_driver);
 703
 704 MODULE_AUTHOR("Guenter Roeck");
 705 MODULE_DESCRIPTION("SMM665 driver");
 706 MODULE_LICENSE("GPL");