1 # SPDX-License-Identifier: GPL-2.0-only
3 # Hardware monitoring chip drivers configuration
7 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 To find out which specific driver(s) you need, use the
20 sensors-detect script from the lm_sensors package. Read
21 <file:Documentation/hwmon/userspace-tools.rst> for details.
23 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
34 Say Y here if you want the I2C chip drivers to produce a bunch of
35 debug messages to the system log. Select this if you are having
36 a problem with I2C support and want to see more of what is going
39 comment "Native drivers"
41 config SENSORS_ABITUGURU
42 tristate "Abit uGuru (rev 1 & 2)"
45 If you say yes here you get support for the sensor part of the first
46 and second revision of the Abit uGuru chip. The voltage and frequency
47 control parts of the Abit uGuru are not supported. The Abit uGuru
48 chip can be found on Abit uGuru featuring motherboards (most modern
49 Abit motherboards from before end 2005). For more info and a list
50 of which motherboards have which revision see
51 Documentation/hwmon/abituguru.rst
53 This driver can also be built as a module. If so, the module
54 will be called abituguru.
56 config SENSORS_ABITUGURU3
57 tristate "Abit uGuru (rev 3)"
60 If you say yes here you get support for the sensor part of the
61 third revision of the Abit uGuru chip. Only reading the sensors
62 and their settings is supported. The third revision of the Abit
63 uGuru chip can be found on recent Abit motherboards (since end
64 2005). For more info and a list of which motherboards have which
65 revision see Documentation/hwmon/abituguru3.rst
67 This driver can also be built as a module. If so, the module
68 will be called abituguru3.
71 tristate "Ampere's Altra SMpro hardware monitoring driver"
74 If you say yes here you get support for the thermal, voltage,
75 current and power sensors of Ampere's Altra processor family SoC
76 with SMpro co-processor.
79 tristate "Analog Devices AD7314 and compatibles"
82 If you say yes here you get support for the Analog Devices
83 AD7314, ADT7301 and ADT7302 temperature sensors.
85 This driver can also be built as a module. If so, the module
86 will be called ad7314.
89 tristate "Analog Devices AD7414"
92 If you say yes here you get support for the Analog Devices
93 AD7414 temperature monitoring chip.
95 This driver can also be built as a module. If so, the module
96 will be called ad7414.
99 tristate "Analog Devices AD7416, AD7417 and AD7418"
102 If you say yes here you get support for the Analog Devices
103 AD7416, AD7417 and AD7418 temperature monitoring chips.
105 This driver can also be built as a module. If so, the module
106 will be called ad7418.
108 config SENSORS_ADM1021
109 tristate "Analog Devices ADM1021 and compatibles"
111 depends on SENSORS_LM90=n
113 If you say yes here you get support for Analog Devices ADM1021
114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
117 This driver can also be built as a module. If so, the module
118 will be called adm1021.
120 config SENSORS_ADM1025
121 tristate "Analog Devices ADM1025 and compatibles"
125 If you say yes here you get support for Analog Devices ADM1025
126 and Philips NE1619 sensor chips.
128 This driver can also be built as a module. If so, the module
129 will be called adm1025.
131 config SENSORS_ADM1026
132 tristate "Analog Devices ADM1026 and compatibles"
136 If you say yes here you get support for Analog Devices ADM1026
139 This driver can also be built as a module. If so, the module
140 will be called adm1026.
142 config SENSORS_ADM1029
143 tristate "Analog Devices ADM1029"
146 If you say yes here you get support for Analog Devices ADM1029
148 Very rare chip, please let us know you use it.
150 This driver can also be built as a module. If so, the module
151 will be called adm1029.
153 config SENSORS_ADM1031
154 tristate "Analog Devices ADM1031 and compatibles"
157 If you say yes here you get support for Analog Devices ADM1031
158 and ADM1030 sensor chips.
160 This driver can also be built as a module. If so, the module
161 will be called adm1031.
163 config SENSORS_ADM1177
164 tristate "Analog Devices ADM1177 and compatibles"
167 If you say yes here you get support for Analog Devices ADM1177
170 This driver can also be built as a module. If so, the module
171 will be called adm1177.
173 config SENSORS_ADM9240
174 tristate "Analog Devices ADM9240 and compatibles"
178 If you say yes here you get support for Analog Devices ADM9240,
179 Dallas DS1780, National Semiconductor LM81 sensor chips.
181 This driver can also be built as a module. If so, the module
182 will be called adm9240.
184 config SENSORS_ADT7X10
188 This module contains common code shared by the ADT7310/ADT7320 and
189 ADT7410/ADT7420 temperature monitoring chip drivers.
191 If built as a module, the module will be called adt7x10.
193 config SENSORS_ADT7310
194 tristate "Analog Devices ADT7310/ADT7320"
195 depends on SPI_MASTER
196 select SENSORS_ADT7X10
198 If you say yes here you get support for the Analog Devices
199 ADT7310 and ADT7320 temperature monitoring chips.
201 This driver can also be built as a module. If so, the module
202 will be called adt7310.
204 config SENSORS_ADT7410
205 tristate "Analog Devices ADT7410/ADT7420"
207 select SENSORS_ADT7X10
209 If you say yes here you get support for the Analog Devices
210 ADT7410 and ADT7420 temperature monitoring chips.
212 This driver can also be built as a module. If so, the module
213 will be called adt7410.
215 config SENSORS_ADT7411
216 tristate "Analog Devices ADT7411"
219 If you say yes here you get support for the Analog Devices
220 ADT7411 voltage and temperature monitoring chip.
222 This driver can also be built as a module. If so, the module
223 will be called adt7411.
225 config SENSORS_ADT7462
226 tristate "Analog Devices ADT7462"
229 If you say yes here you get support for the Analog Devices
230 ADT7462 temperature monitoring chips.
232 This driver can also be built as a module. If so, the module
233 will be called adt7462.
235 config SENSORS_ADT7470
236 tristate "Analog Devices ADT7470"
239 If you say yes here you get support for the Analog Devices
240 ADT7470 temperature monitoring chips.
242 This driver can also be built as a module. If so, the module
243 will be called adt7470.
245 config SENSORS_ADT7475
246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
250 If you say yes here you get support for the Analog Devices
251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
254 This driver can also be built as a module. If so, the module
255 will be called adt7475.
258 tristate "Aosong AHT10"
261 If you say yes here, you get support for the Aosong AHT10
262 temperature and humidity sensors
264 This driver can also be built as a module. If so, the module
265 will be called aht10.
267 config SENSORS_AQUACOMPUTER_D5NEXT
268 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
272 If you say yes here you get support for sensors and fans of
273 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
274 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
275 Next sensor, where available.
277 This driver can also be built as a module. If so, the module
278 will be called aquacomputer_d5next.
281 tristate "Synaptics AS370 SoC hardware monitoring driver"
283 If you say yes here you get support for the PVT sensors of
284 the Synaptics AS370 SoC
286 This driver can also be built as a module. If so, the module
287 will be called as370-hwmon.
290 config SENSORS_ASC7621
291 tristate "Andigilog aSC7621"
294 If you say yes here you get support for the aSC7621
295 family of SMBus sensors chip found on most Intel X38, X48, X58,
296 945, 965 and 975 desktop boards. Currently supported chips:
300 This driver can also be built as a module. If so, the module
301 will be called asc7621.
303 config SENSORS_AXI_FAN_CONTROL
304 tristate "Analog Devices FAN Control HDL Core driver"
306 If you say yes here you get support for the Analog Devices
307 AXI HDL FAN monitoring core.
309 This driver can also be built as a module. If so, the module
310 will be called axi-fan-control
312 config SENSORS_K8TEMP
313 tristate "AMD Athlon64/FX or Opteron temperature sensor"
314 depends on X86 && PCI
316 If you say yes here you get support for the temperature
317 sensor(s) inside your CPU. Supported is whole AMD K8
318 microarchitecture. Please note that you will need at least
319 lm-sensors 2.10.1 for proper userspace support.
321 This driver can also be built as a module. If so, the module
322 will be called k8temp.
324 config SENSORS_K10TEMP
325 tristate "AMD Family 10h+ temperature sensor"
326 depends on X86 && PCI && AMD_NB
328 If you say yes here you get support for the temperature
329 sensor(s) inside your CPU. Supported are later revisions of
330 the AMD Family 10h and all revisions of the AMD Family 11h,
331 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
332 and 16h (Kabini/Mullins) microarchitectures.
334 This driver can also be built as a module. If so, the module
335 will be called k10temp.
337 config SENSORS_FAM15H_POWER
338 tristate "AMD Family 15h processor power"
339 depends on X86 && PCI && CPU_SUP_AMD
341 If you say yes here you get support for processor power
342 information of your AMD family 15h CPU.
344 This driver can also be built as a module. If so, the module
345 will be called fam15h_power.
347 config SENSORS_APPLESMC
348 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
349 depends on INPUT && X86
353 This driver provides support for the Apple System Management
354 Controller, which provides an accelerometer (Apple Sudden Motion
355 Sensor), light sensors, temperature sensors, keyboard backlight
356 control and fan control.
358 Only Intel-based Apple's computers are supported (MacBook Pro,
361 Data from the different sensors, keyboard backlight control and fan
362 control are accessible via sysfs.
364 This driver also provides an absolute input class device, allowing
365 the laptop to act as a pinball machine-esque joystick.
367 Say Y here if you have an applicable laptop and want to experience
368 the awesome power of applesmc.
370 config SENSORS_ARM_SCMI
371 tristate "ARM SCMI Sensors"
372 depends on ARM_SCMI_PROTOCOL
373 depends on THERMAL || !THERMAL_OF
375 This driver provides support for temperature, voltage, current
376 and power sensors available on SCMI based platforms. The actual
377 number and type of sensors exported depend on the platform.
379 This driver can also be built as a module. If so, the module
380 will be called scmi-hwmon.
382 config SENSORS_ARM_SCPI
383 tristate "ARM SCPI Sensors"
384 depends on ARM_SCPI_PROTOCOL
385 depends on THERMAL || !THERMAL_OF
387 This driver provides support for temperature, voltage, current
388 and power sensors available on ARM Ltd's SCP based platforms. The
389 actual number and type of sensors exported depend on the platform.
391 config SENSORS_ASB100
392 tristate "Asus ASB100 Bach"
393 depends on (X86 || COMPILE_TEST) && I2C
396 If you say yes here you get support for the ASB100 Bach sensor
397 chip found on some Asus mainboards.
399 This driver can also be built as a module. If so, the module
400 will be called asb100.
402 config SENSORS_ASPEED
403 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
404 depends on ARCH_ASPEED || COMPILE_TEST
405 depends on THERMAL || THERMAL=n
408 This driver provides support for ASPEED AST2400/AST2500 PWM
409 and Fan Tacho controllers.
411 This driver can also be built as a module. If so, the module
412 will be called aspeed_pwm_tacho.
415 tristate "Attansic ATXP1 VID controller"
419 If you say yes here you get support for the Attansic ATXP1 VID
422 If your board have such a chip, you are able to control your CPU
423 core and other voltages.
425 This driver can also be built as a module. If so, the module
426 will be called atxp1.
428 config SENSORS_BT1_PVT
429 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
430 depends on MIPS_BAIKAL_T1 || COMPILE_TEST
433 If you say yes here you get support for Baikal-T1 PVT sensor
434 embedded into the SoC.
436 This driver can also be built as a module. If so, the module will be
439 config SENSORS_BT1_PVT_ALARMS
440 bool "Enable Baikal-T1 PVT sensor alarms"
441 depends on SENSORS_BT1_PVT
443 Baikal-T1 PVT IP-block provides threshold registers for each
444 supported sensor. But the corresponding interrupts might be
445 generated by the thresholds comparator only in synchronization with
446 a data conversion. Additionally there is only one sensor data can
447 be converted at a time. All of these makes the interface impossible
448 to be used for the hwmon alarms implementation without periodic
449 switch between the PVT sensors. By default the data conversion is
450 performed on demand from the user-space. If this config is enabled
451 the data conversion will be periodically performed and the data will be
452 saved in the internal driver cache.
454 config SENSORS_CORSAIR_CPRO
455 tristate "Corsair Commander Pro controller"
458 If you say yes here you get support for the Corsair Commander Pro
461 This driver can also be built as a module. If so, the module
462 will be called corsair-cpro.
464 config SENSORS_CORSAIR_PSU
465 tristate "Corsair PSU HID controller"
468 If you say yes here you get support for Corsair PSUs with a HID
470 Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
471 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
474 This driver can also be built as a module. If so, the module
475 will be called corsair-psu.
477 config SENSORS_DRIVETEMP
478 tristate "Hard disk drives with temperature sensors"
479 depends on SCSI && ATA
481 If you say yes you get support for the temperature sensor on
484 This driver can also be built as a module. If so, the module
485 will be called drivetemp.
488 tristate "Dallas Semiconductor DS620"
491 If you say yes here you get support for Dallas Semiconductor
494 This driver can also be built as a module. If so, the module
495 will be called ds620.
497 config SENSORS_DS1621
498 tristate "Dallas Semiconductor DS1621 and compatibles"
501 If you say yes here you get support for Dallas Semiconductor/Maxim
502 Integrated DS1621 sensor chips and compatible models including:
504 - Dallas Semiconductor DS1625
505 - Maxim Integrated DS1631
506 - Maxim Integrated DS1721
507 - Maxim Integrated DS1731
509 This driver can also be built as a module. If so, the module
510 will be called ds1621.
512 config SENSORS_DELL_SMM
513 tristate "Dell laptop SMM BIOS hwmon driver"
517 This hwmon driver adds support for reporting temperature of different
518 sensors and controls the fans on Dell laptops via System Management
519 Mode provided by Dell BIOS.
521 When option I8K is also enabled this driver provides legacy /proc/i8k
522 userspace interface for i8kutils package.
525 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
526 depends on SENSORS_DELL_SMM
529 This option enables the legacy /proc/i8k userspace interface of the
530 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
531 version, temperatures and allows control of fan speeds of some Dell
532 laptops. Sometimes it also reports power and hotkey status.
534 This interface is required to run programs from the i8kutils package.
536 Say Y if you intend to run userspace programs that use this interface.
539 config SENSORS_DA9052_ADC
540 tristate "Dialog DA9052/DA9053 ADC"
541 depends on PMIC_DA9052
543 Say y here to support the ADC found on Dialog Semiconductor
544 DA9052-BC and DA9053-AA/Bx PMICs.
546 This driver can also be built as module. If so, the module
547 will be called da9052-hwmon.
549 config SENSORS_DA9055
550 tristate "Dialog Semiconductor DA9055 ADC"
551 depends on MFD_DA9055
553 If you say yes here you get support for ADC on the Dialog
554 Semiconductor DA9055 PMIC.
556 This driver can also be built as a module. If so, the module
557 will be called da9055-hwmon.
559 config SENSORS_I5K_AMB
560 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
563 If you say yes here you get support for FB-DIMM AMB temperature
564 monitoring chips on systems with the Intel 5000 series chipset.
566 This driver can also be built as a module. If so, the module
567 will be called i5k_amb.
569 config SENSORS_SPARX5
570 tristate "Sparx5 SoC temperature sensor"
571 depends on ARCH_SPARX5 || COMPILE_TEST
573 If you say yes here you get support for temperature monitoring
574 with the Microchip Sparx5 SoC.
576 This driver can also be built as a module. If so, the module
577 will be called sparx5-temp.
579 config SENSORS_F71805F
580 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
583 If you say yes here you get support for hardware monitoring
584 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
587 This driver can also be built as a module. If so, the module
588 will be called f71805f.
590 config SENSORS_F71882FG
591 tristate "Fintek F71882FG and compatibles"
594 If you say yes here you get support for hardware monitoring
595 features of many Fintek Super-I/O (LPC) chips. The currently
609 This driver can also be built as a module. If so, the module
610 will be called f71882fg.
612 config SENSORS_F75375S
613 tristate "Fintek F75375S/SP, F75373 and F75387"
616 If you say yes here you get support for hardware monitoring
617 features of the Fintek F75375S/SP, F75373 and F75387
619 This driver can also be built as a module. If so, the module
620 will be called f75375s.
623 tristate "Gateworks System Controller ADC"
624 depends on MFD_GATEWORKS_GSC
626 Support for the Gateworks System Controller A/D converters.
628 To compile this driver as a module, choose M here:
629 the module will be called gsc-hwmon.
631 config SENSORS_MC13783_ADC
632 tristate "Freescale MC13783/MC13892 ADC"
633 depends on MFD_MC13XXX
635 Support for the A/D converter on MC13783 and MC13892 PMIC.
637 config SENSORS_FSCHMD
638 tristate "Fujitsu Siemens Computers sensor chips"
639 depends on (X86 || COMPILE_TEST) && I2C
641 If you say yes here you get support for the following Fujitsu
642 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
643 Heimdall, Heracles, Hades and Syleus including support for the
646 This is a merged driver for FSC sensor chips replacing the fscpos,
647 fscscy and fscher drivers and adding support for several other FSC
650 This driver can also be built as a module. If so, the module
651 will be called fschmd.
653 config SENSORS_FTSTEUTATES
654 tristate "Fujitsu Technology Solutions sensor chip Teutates"
655 depends on I2C && WATCHDOG
658 If you say yes here you get support for the Fujitsu Technology
659 Solutions (FTS) sensor chip "Teutates" including support for
660 the integrated watchdog.
662 This driver can also be built as a module. If so, the module
663 will be called ftsteutates.
665 config SENSORS_GL518SM
666 tristate "Genesys Logic GL518SM"
669 If you say yes here you get support for Genesys Logic GL518SM
672 This driver can also be built as a module. If so, the module
673 will be called gl518sm.
675 config SENSORS_GL520SM
676 tristate "Genesys Logic GL520SM"
680 If you say yes here you get support for Genesys Logic GL520SM
683 This driver can also be built as a module. If so, the module
684 will be called gl520sm.
690 If you say yes here you get support for Global Mixed-mode
691 Technology Inc G760A fan speed PWM controller chips.
693 This driver can also be built as a module. If so, the module
694 will be called g760a.
697 tristate "GMT G762 and G763"
700 If you say yes here you get support for Global Mixed-mode
701 Technology Inc G762 and G763 fan speed PWM controller chips.
703 This driver can also be built as a module. If so, the module
706 config SENSORS_GPIO_FAN
709 depends on GPIOLIB || COMPILE_TEST
710 depends on THERMAL || THERMAL=n
712 If you say yes here you get support for fans connected to GPIO lines.
714 This driver can also be built as a module. If so, the module
715 will be called gpio-fan.
717 config SENSORS_GXP_FAN_CTRL
718 tristate "HPE GXP fan controller"
719 depends on ARCH_HPE_GXP || COMPILE_TEST
721 If you say yes here you get support for GXP fan control functionality.
723 The GXP controls fan function via the CPLD through the use of PWM
724 registers. This driver reports status and pwm setting of the fans.
726 config SENSORS_HIH6130
727 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
730 If you say yes here you get support for Honeywell Humidicon
731 HIH-6130 and HIH-6131 Humidicon humidity sensors.
733 This driver can also be built as a module. If so, the module
734 will be called hih6130.
736 config SENSORS_IBMAEM
737 tristate "IBM Active Energy Manager temperature/power sensors and control"
739 depends on IPMI_HANDLER
741 If you say yes here you get support for the temperature and
742 power sensors and capping hardware in various IBM System X
743 servers that support Active Energy Manager. This includes
744 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
745 and certain HC10/HS2x/LS2x/QS2x blades.
747 This driver can also be built as a module. If so, the module
748 will be called ibmaem.
750 config SENSORS_IBMPEX
751 tristate "IBM PowerExecutive temperature/power sensors"
753 depends on IPMI_HANDLER
755 If you say yes here you get support for the temperature and
756 power sensors in various IBM System X servers that support
757 PowerExecutive. So far this includes the x3350, x3550, x3650,
758 x3655, and x3755; the x3800, x3850, and x3950 models that have
759 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
761 This driver can also be built as a module. If so, the module
762 will be called ibmpex.
764 config SENSORS_IBMPOWERNV
765 tristate "IBM POWERNV platform sensors"
766 depends on PPC_POWERNV
769 If you say yes here you get support for the temperature/fan/power
770 sensors on your PowerNV platform.
772 This driver can also be built as a module. If so, the module
773 will be called ibmpowernv.
775 config SENSORS_IIO_HWMON
776 tristate "Hwmon driver that uses channels specified via iio maps"
779 This is a platform driver that in combination with a suitable
780 map allows IIO devices to provide basic hwmon functionality
781 for those channels specified in the map. This map can be provided
782 either via platform data or the device tree bindings.
785 tristate "Intel 5500/5520/X58 temperature sensor"
786 depends on X86 && PCI
788 If you say yes here you get support for the temperature
789 sensor inside the Intel 5500, 5520 and X58 chipsets.
791 This driver can also be built as a module. If so, the module
792 will be called i5500_temp.
794 config SENSORS_CORETEMP
795 tristate "Intel Core/Core2/Atom temperature sensor"
798 If you say yes here you get support for the temperature
799 sensor inside your CPU. Most of the family 6 CPUs
800 are supported. Check Documentation/hwmon/coretemp.rst for details.
803 tristate "ITE IT87xx and compatibles"
807 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
808 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
809 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
810 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
813 This driver can also be built as a module. If so, the module
817 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
821 If you say yes here, you get support for JEDEC JC42.4 compliant
822 temperature sensors, which are used on many DDR3 memory modules for
823 mobile devices and servers. Support will include, but not be limited
824 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
825 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
826 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
828 This driver can also be built as a module. If so, the module
831 config SENSORS_POWR1220
832 tristate "Lattice POWR1220 Power Monitoring"
835 If you say yes here you get access to the hardware monitoring
836 functions of the Lattice POWR1220 isp Power Supply Monitoring,
837 Sequencing and Margining Controller.
839 This driver can also be built as a module. If so, the module
840 will be called powr1220.
842 config SENSORS_LAN966X
843 tristate "Microchip LAN966x Hardware Monitoring"
844 depends on SOC_LAN966 || COMPILE_TEST
848 If you say yes here you get support for temperature monitoring
849 on the Microchip LAN966x SoC.
851 This driver can also be built as a module. If so, the module
852 will be called lan966x-hwmon.
854 config SENSORS_LINEAGE
855 tristate "Lineage Compact Power Line Power Entry Module"
858 If you say yes here you get support for the Lineage Compact Power Line
859 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
860 CP2000DC, CP2725, and others.
862 This driver can also be built as a module. If so, the module
863 will be called lineage-pem.
865 config SENSORS_LOCHNAGAR
866 tristate "Lochnagar Hardware Monitor"
867 depends on MFD_LOCHNAGAR
869 If you say yes here you get support for Lochnagar 2 temperature,
870 voltage and current sensors abilities.
872 This driver can also be built as a module. If so, the module
873 will be called lochnagar-hwmon.
875 config SENSORS_LTC2945
876 tristate "Linear Technology LTC2945"
880 If you say yes here you get support for Linear Technology LTC2945
883 This driver can also be built as a module. If so, the module will
886 config SENSORS_LTC2947
889 config SENSORS_LTC2947_I2C
890 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
893 select SENSORS_LTC2947
895 If you say yes here you get support for Linear Technology LTC2947
896 I2C High Precision Power and Energy Monitor
898 This driver can also be built as a module. If so, the module will
899 be called ltc2947-i2c.
901 config SENSORS_LTC2947_SPI
902 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
903 depends on SPI_MASTER
905 select SENSORS_LTC2947
907 If you say yes here you get support for Linear Technology LTC2947
908 SPI High Precision Power and Energy Monitor
910 This driver can also be built as a module. If so, the module will
911 be called ltc2947-spi.
913 config SENSORS_LTC2990
914 tristate "Linear Technology LTC2990"
917 If you say yes here you get support for Linear Technology LTC2990
918 I2C System Monitor. The LTC2990 supports a combination of voltage,
919 current and temperature monitoring.
921 This driver can also be built as a module. If so, the module will
924 config SENSORS_LTC2992
925 tristate "Linear Technology LTC2992"
929 If you say yes here you get support for Linear Technology LTC2992
930 I2C System Monitor. The LTC2992 measures current, voltage, and
931 power of two supplies.
933 This driver can also be built as a module. If so, the module will
936 config SENSORS_LTC4151
937 tristate "Linear Technology LTC4151"
940 If you say yes here you get support for Linear Technology LTC4151
941 High Voltage I2C Current and Voltage Monitor interface.
943 This driver can also be built as a module. If so, the module will
946 config SENSORS_LTC4215
947 tristate "Linear Technology LTC4215"
950 If you say yes here you get support for Linear Technology LTC4215
951 Hot Swap Controller I2C interface.
953 This driver can also be built as a module. If so, the module will
956 config SENSORS_LTC4222
957 tristate "Linear Technology LTC4222"
961 If you say yes here you get support for Linear Technology LTC4222
962 Dual Hot Swap Controller I2C interface.
964 This driver can also be built as a module. If so, the module will
967 config SENSORS_LTC4245
968 tristate "Linear Technology LTC4245"
971 If you say yes here you get support for Linear Technology LTC4245
972 Multiple Supply Hot Swap Controller I2C interface.
974 This driver can also be built as a module. If so, the module will
977 config SENSORS_LTC4260
978 tristate "Linear Technology LTC4260"
982 If you say yes here you get support for Linear Technology LTC4260
983 Positive Voltage Hot Swap Controller I2C interface.
985 This driver can also be built as a module. If so, the module will
988 config SENSORS_LTC4261
989 tristate "Linear Technology LTC4261"
992 If you say yes here you get support for Linear Technology LTC4261
993 Negative Voltage Hot Swap Controller I2C interface.
995 This driver can also be built as a module. If so, the module will
998 config SENSORS_LTQ_CPUTEMP
999 bool "Lantiq cpu temperature sensor driver"
1002 If you say yes here you get support for the temperature
1003 sensor inside your CPU.
1005 config SENSORS_MAX1111
1006 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
1007 depends on SPI_MASTER
1009 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
1012 This driver can also be built as a module. If so, the module
1013 will be called max1111.
1015 config SENSORS_MAX127
1016 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
1019 Say y here to support Maxim's MAX127 DAS chips.
1021 This driver can also be built as a module. If so, the module
1022 will be called max127.
1024 config SENSORS_MAX16065
1025 tristate "Maxim MAX16065 System Manager and compatibles"
1028 If you say yes here you get support for hardware monitoring
1029 capabilities of the following Maxim System Manager chips.
1037 This driver can also be built as a module. If so, the module
1038 will be called max16065.
1040 config SENSORS_MAX1619
1041 tristate "Maxim MAX1619 sensor chip"
1044 If you say yes here you get support for MAX1619 sensor chip.
1046 This driver can also be built as a module. If so, the module
1047 will be called max1619.
1049 config SENSORS_MAX1668
1050 tristate "Maxim MAX1668 and compatibles"
1053 If you say yes here you get support for MAX1668, MAX1989 and
1056 This driver can also be built as a module. If so, the module
1057 will be called max1668.
1059 config SENSORS_MAX197
1060 tristate "Maxim MAX197 and compatibles"
1062 Support for the Maxim MAX197 A/D converter.
1063 Support will include, but not be limited to, MAX197, and MAX199.
1065 This driver can also be built as a module. If so, the module
1066 will be called max197.
1068 config SENSORS_MAX31722
1069 tristate "MAX31722 temperature sensor"
1072 Support for the Maxim Integrated MAX31722/MAX31723 digital
1073 thermometers/thermostats operating over an SPI interface.
1075 This driver can also be built as a module. If so, the module
1076 will be called max31722.
1078 config SENSORS_MAX31730
1079 tristate "MAX31730 temperature sensor"
1082 Support for the Maxim Integrated MAX31730 3-Channel Remote
1085 This driver can also be built as a module. If so, the module
1086 will be called max31730.
1088 config SENSORS_MAX31760
1089 tristate "MAX31760 fan speed controller"
1093 Support for the Analog Devices MAX31760 Precision Fan-Speed
1094 Controller. MAX31760 integrates temperature sensing along with
1095 precision PWM fan control.
1097 This driver can also be built as a module. If so, the module
1098 will be called max31760.
1100 config SENSORS_MAX6620
1101 tristate "Maxim MAX6620 fan controller"
1104 If you say yes here you get support for the MAX6620
1107 This driver can also be built as a module. If so, the module
1108 will be called max6620.
1110 config SENSORS_MAX6621
1111 tristate "Maxim MAX6621 sensor chip"
1115 If you say yes here you get support for MAX6621 sensor chip.
1116 MAX6621 is a PECI-to-I2C translator provides an efficient,
1117 low-cost solution for PECI-to-SMBus/I2C protocol conversion.
1118 It allows reading the temperature from the PECI-compliant
1119 host directly from up to four PECI-enabled CPUs.
1121 This driver can also be built as a module. If so, the module
1122 will be called max6621.
1124 config SENSORS_MAX6639
1125 tristate "Maxim MAX6639 sensor chip"
1128 If you say yes here you get support for the MAX6639
1131 This driver can also be built as a module. If so, the module
1132 will be called max6639.
1134 config SENSORS_MAX6642
1135 tristate "Maxim MAX6642 sensor chip"
1137 depends on SENSORS_LM90=n
1139 If you say yes here you get support for MAX6642 sensor chip.
1140 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
1141 with Overtemperature Alarm from Maxim.
1143 This driver can also be built as a module. If so, the module
1144 will be called max6642.
1146 config SENSORS_MAX6650
1147 tristate "Maxim MAX6650 sensor chip"
1149 depends on THERMAL || THERMAL=n
1151 If you say yes here you get support for the MAX6650 / MAX6651
1154 This driver can also be built as a module. If so, the module
1155 will be called max6650.
1157 config SENSORS_MAX6697
1158 tristate "Maxim MAX6697 and compatibles"
1161 If you say yes here you get support for MAX6581, MAX6602, MAX6622,
1162 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
1163 temperature sensor chips.
1165 This driver can also be built as a module. If so, the module
1166 will be called max6697.
1168 config SENSORS_MAX31790
1169 tristate "Maxim MAX31790 sensor chip"
1172 If you say yes here you get support for 6-Channel PWM-Output
1175 This driver can also be built as a module. If so, the module
1176 will be called max31790.
1178 config SENSORS_MC34VR500
1179 tristate "NXP MC34VR500 hardware monitoring driver"
1182 If you say yes here you get support for the temperature and input
1183 voltage sensors of the NXP MC34VR500.
1185 config SENSORS_MCP3021
1186 tristate "Microchip MCP3021 and compatibles"
1189 If you say yes here you get support for MCP3021 and MCP3221.
1190 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
1191 with 12-bit resolution.
1193 This driver can also be built as a module. If so, the module
1194 will be called mcp3021.
1196 config SENSORS_MLXREG_FAN
1197 tristate "Mellanox FAN driver"
1198 depends on MELLANOX_PLATFORM
1202 This option enables support for the FAN control on the Mellanox
1203 Ethernet and InfiniBand switches. The driver can be activated by the
1204 platform device add call. Say Y to enable these. To compile this
1205 driver as a module, choose 'M' here: the module will be called
1208 config SENSORS_TC654
1209 tristate "Microchip TC654/TC655 and compatibles"
1212 If you say yes here you get support for TC654 and TC655.
1213 The TC654 and TC655 are PWM mode fan speed controllers with
1214 FanSense technology for use with brushless DC fans.
1216 This driver can also be built as a module. If so, the module
1217 will be called tc654.
1219 config SENSORS_TPS23861
1220 tristate "Texas Instruments TPS23861 PoE PSE"
1224 If you say yes here you get support for Texas Instruments
1225 TPS23861 802.3at PoE PSE chips.
1227 This driver can also be built as a module. If so, the module
1228 will be called tps23861.
1230 config SENSORS_MENF21BMC_HWMON
1231 tristate "MEN 14F021P00 BMC Hardware Monitoring"
1232 depends on MFD_MENF21BMC
1234 Say Y here to include support for the MEN 14F021P00 BMC
1235 hardware monitoring.
1237 This driver can also be built as a module. If so the module
1238 will be called menf21bmc_hwmon.
1240 config SENSORS_MR75203
1241 tristate "Moortec Semiconductor MR75203 PVT Controller"
1244 If you say yes here you get support for Moortec MR75203
1247 This driver can also be built as a module. If so, the module
1248 will be called mr75203.
1250 config SENSORS_ADCXX
1251 tristate "National Semiconductor ADCxxxSxxx"
1252 depends on SPI_MASTER
1254 If you say yes here you get support for the National Semiconductor
1255 ADC<bb><c>S<sss> chip family, where
1256 * bb is the resolution in number of bits (8, 10, 12)
1257 * c is the number of channels (1, 2, 4, 8)
1258 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
1259 kSPS and 101 for 1 MSPS)
1261 Examples : ADC081S101, ADC124S501, ...
1263 This driver can also be built as a module. If so, the module
1264 will be called adcxx.
1267 tristate "National Semiconductor LM63 and compatibles"
1270 If you say yes here you get support for the National
1271 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
1272 sensors with integrated fan control. Such chips are found
1273 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
1276 This driver can also be built as a module. If so, the module
1277 will be called lm63.
1280 tristate "National Semiconductor LM70 and compatibles"
1281 depends on SPI_MASTER
1283 If you say yes here you get support for the National Semiconductor
1284 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
1285 TMP125 digital temperature sensor chips.
1287 This driver can also be built as a module. If so, the module
1288 will be called lm70.
1291 tristate "National Semiconductor LM73"
1294 If you say yes here you get support for National Semiconductor LM73
1296 This driver can also be built as a module. If so, the module
1297 will be called lm73.
1300 tristate "National Semiconductor LM75 and compatibles"
1304 If you say yes here you get support for one common type of
1305 temperature sensor chip, with models including:
1307 - Analog Devices ADT75
1308 - Atmel (now Microchip) AT30TS74
1309 - Dallas Semiconductor DS75, DS1775 and DS7505
1310 - Global Mixed-mode Technology (GMT) G751
1311 - Maxim MAX6625 and MAX6626
1313 - National Semiconductor LM75, LM75A
1315 - ST Microelectronics STDS75
1316 - ST Microelectronics STLM75
1317 - TelCom (now Microchip) TCN75
1318 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
1321 This driver supports driver model based binding through board
1322 specific I2C device tables.
1324 It also supports the "legacy" style of driver binding. To use
1325 that with some chips which don't replicate LM75 quirks exactly,
1326 you may need the "force" module parameter.
1328 This driver can also be built as a module. If so, the module
1329 will be called lm75.
1332 tristate "National Semiconductor LM77"
1335 If you say yes here you get support for National Semiconductor LM77
1338 This driver can also be built as a module. If so, the module
1339 will be called lm77.
1342 tristate "National Semiconductor LM78 and compatibles"
1346 If you say yes here you get support for National Semiconductor LM78,
1349 This driver can also be built as a module. If so, the module
1350 will be called lm78.
1353 tristate "National Semiconductor LM80 and LM96080"
1356 If you say yes here you get support for National Semiconductor
1357 LM80 and LM96080 sensor chips.
1359 This driver can also be built as a module. If so, the module
1360 will be called lm80.
1363 tristate "National Semiconductor LM83 and compatibles"
1367 If you say yes here you get support for National Semiconductor
1368 LM82 and LM83 sensor chips.
1370 This driver can also be built as a module. If so, the module
1371 will be called lm83.
1374 tristate "National Semiconductor LM85 and compatibles"
1378 If you say yes here you get support for National Semiconductor LM85
1379 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
1380 EMC6D101, EMC6D102, and EMC6D103.
1382 This driver can also be built as a module. If so, the module
1383 will be called lm85.
1386 tristate "National Semiconductor LM87 and compatibles"
1390 If you say yes here you get support for National Semiconductor LM87
1391 and Analog Devices ADM1024 sensor chips.
1393 This driver can also be built as a module. If so, the module
1394 will be called lm87.
1397 tristate "National Semiconductor LM90 and compatibles"
1400 If you say yes here you get support for National Semiconductor LM84,
1401 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
1402 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
1403 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
1404 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
1406 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
1407 Winbond/Nuvoton W83L771W/G/AWG/ASG,
1408 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
1411 This driver can also be built as a module. If so, the module
1412 will be called lm90.
1415 tristate "National Semiconductor LM92 and compatibles"
1418 If you say yes here you get support for National Semiconductor LM92
1419 and Maxim MAX6635 sensor chips.
1421 This driver can also be built as a module. If so, the module
1422 will be called lm92.
1425 tristate "National Semiconductor LM93 and compatibles"
1429 If you say yes here you get support for National Semiconductor LM93,
1430 LM94, and compatible sensor chips.
1432 This driver can also be built as a module. If so, the module
1433 will be called lm93.
1435 config SENSORS_LM95234
1436 tristate "National Semiconductor LM95234 and compatibles"
1439 If you say yes here you get support for the LM95233 and LM95234
1440 temperature sensor chips.
1442 This driver can also be built as a module. If so, the module
1443 will be called lm95234.
1445 config SENSORS_LM95241
1446 tristate "National Semiconductor LM95241 and compatibles"
1449 If you say yes here you get support for LM95231 and LM95241 sensor
1452 This driver can also be built as a module. If so, the module
1453 will be called lm95241.
1455 config SENSORS_LM95245
1456 tristate "National Semiconductor LM95245 and compatibles"
1460 If you say yes here you get support for LM95235 and LM95245
1461 temperature sensor chips.
1463 This driver can also be built as a module. If so, the module
1464 will be called lm95245.
1466 config SENSORS_PC87360
1467 tristate "National Semiconductor PC87360 family"
1471 If you say yes here you get access to the hardware monitoring
1472 functions of the National Semiconductor PC8736x Super-I/O chips.
1473 The PC87360, PC87363 and PC87364 only have fan monitoring and
1474 control. The PC87365 and PC87366 additionally have voltage and
1475 temperature monitoring.
1477 This driver can also be built as a module. If so, the module
1478 will be called pc87360.
1480 config SENSORS_PC87427
1481 tristate "National Semiconductor PC87427"
1484 If you say yes here you get access to the hardware monitoring
1485 functions of the National Semiconductor PC87427 Super-I/O chip.
1486 The chip has two distinct logical devices, one for fan speed
1487 monitoring and control, and one for voltage and temperature
1488 monitoring. Fan speed monitoring and control are supported, as
1489 well as temperature monitoring. Voltages aren't supported yet.
1491 This driver can also be built as a module. If so, the module
1492 will be called pc87427.
1494 config SENSORS_NTC_THERMISTOR
1495 tristate "NTC thermistor support"
1497 depends on THERMAL || !THERMAL_OF
1499 This driver supports NTC thermistors sensor reading and its
1500 interpretation. The driver can also monitor the temperature and
1501 send notifications about the temperature.
1503 Currently, this driver supports
1504 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
1505 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
1506 B57891S0103 from EPCOS.
1508 This driver can also be built as a module. If so, the module
1509 will be called ntc-thermistor.
1511 config SENSORS_NCT6683
1512 tristate "Nuvoton NCT6683D"
1515 If you say yes here you get support for the hardware monitoring
1516 functionality of the Nuvoton NCT6683D eSIO chip.
1518 This driver can also be built as a module. If so, the module
1519 will be called nct6683.
1521 config SENSORS_NCT6775_CORE
1525 This module contains common code shared by the platform and
1526 i2c versions of the nct6775 driver; it is not useful on its
1529 If built as a module, the module will be called
1532 config SENSORS_NCT6775
1533 tristate "Platform driver for Nuvoton NCT6775F and compatibles"
1535 depends on ACPI || ACPI=n
1537 select SENSORS_NCT6775_CORE
1539 If you say yes here you get support for the hardware monitoring
1540 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1541 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1542 Super-I/O chips. This driver replaces the w83627ehf driver for
1543 NCT6775F and NCT6776F.
1545 This driver can also be built as a module. If so, the module
1546 will be called nct6775.
1548 config SENSORS_NCT6775_I2C
1549 tristate "I2C driver for Nuvoton NCT6775F and compatibles"
1552 select SENSORS_NCT6775_CORE
1554 If you say yes here you get support for the hardware monitoring
1555 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1556 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1557 Super-I/O chips via their I2C interface.
1559 If you're not building a kernel for a BMC, this is probably
1560 not the driver you want (see CONFIG_SENSORS_NCT6775).
1562 This driver can also be built as a module. If so, the module
1563 will be called nct6775-i2c.
1565 config SENSORS_NCT7802
1566 tristate "Nuvoton NCT7802Y"
1570 If you say yes here you get support for the Nuvoton NCT7802Y
1571 hardware monitoring chip.
1573 This driver can also be built as a module. If so, the module
1574 will be called nct7802.
1576 config SENSORS_NCT7904
1577 tristate "Nuvoton NCT7904"
1578 depends on I2C && WATCHDOG
1579 select WATCHDOG_CORE
1581 If you say yes here you get support for the Nuvoton NCT7904
1582 hardware monitoring chip, including manual fan speed control
1583 and support for the integrated watchdog.
1585 This driver can also be built as a module. If so, the module
1586 will be called nct7904.
1588 config SENSORS_NPCM7XX
1589 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
1592 This driver provides support for Nuvoton NPCM750/730/715/705 PWM
1593 and Fan controllers.
1595 This driver can also be built as a module. If so, the module
1596 will be called npcm750-pwm-fan.
1598 config SENSORS_NSA320
1599 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
1600 depends on GPIOLIB && OF
1601 depends on MACH_KIRKWOOD || COMPILE_TEST
1603 If you say yes here you get support for hardware monitoring
1604 for the ZyXEL NSA320 Media Server and other compatible devices
1605 (probably the NSA325 and some NSA310 variants).
1607 The sensor data is taken from a Holtek HT46R065 microcontroller
1608 connected to GPIO lines.
1610 This driver can also be built as a module. If so, the module
1611 will be called nsa320-hwmon.
1613 config SENSORS_NZXT_KRAKEN2
1614 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
1617 If you say yes here you get support for hardware monitoring for the
1618 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
1620 This driver can also be built as a module. If so, the module
1621 will be called nzxt-kraken2.
1623 config SENSORS_NZXT_SMART2
1624 tristate "NZXT RGB & Fan Controller/Smart Device v2"
1627 If you say yes here you get support for hardware monitoring for the
1628 NZXT RGB & Fan Controller/Smart Device v2.
1630 This driver can also be built as a module. If so, the module
1631 will be called nzxt-smart2.
1633 source "drivers/hwmon/occ/Kconfig"
1636 tristate "OneXPlayer EC fan control"
1640 If you say yes here you get support for fan readings and control over
1641 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
1642 boards are supported.
1644 Can also be built as a module. In that case it will be called oxp-sensors.
1646 config SENSORS_PCF8591
1647 tristate "Philips PCF8591 ADC/DAC"
1650 If you say yes here you get support for Philips PCF8591 4-channel
1651 ADC, 1-channel DAC chips.
1653 This driver can also be built as a module. If so, the module
1654 will be called pcf8591.
1656 These devices are hard to detect and rarely found on mainstream
1657 hardware. If unsure, say N.
1659 source "drivers/hwmon/peci/Kconfig"
1661 source "drivers/hwmon/pmbus/Kconfig"
1663 config SENSORS_PWM_FAN
1665 depends on (PWM && OF) || COMPILE_TEST
1666 depends on THERMAL || THERMAL=n
1668 If you say yes here you get support for fans connected to PWM lines.
1669 The driver uses the generic PWM interface, thus it will work on a
1672 This driver can also be built as a module. If so, the module
1673 will be called pwm-fan.
1675 config SENSORS_RASPBERRYPI_HWMON
1676 tristate "Raspberry Pi voltage monitor"
1677 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
1679 If you say yes here you get support for voltage sensor on the
1682 This driver can also be built as a module. If so, the module
1683 will be called raspberrypi-hwmon.
1685 config SENSORS_SL28CPLD
1686 tristate "Kontron sl28cpld hardware monitoring driver"
1687 depends on MFD_SL28CPLD || COMPILE_TEST
1689 If you say yes here you get support for the fan supervisor of the
1690 sl28cpld board management controller.
1692 This driver can also be built as a module. If so, the module
1693 will be called sl28cpld-hwmon.
1695 config SENSORS_SBTSI
1696 tristate "Emulated SB-TSI temperature sensor"
1699 If you say yes here you get support for emulated temperature
1700 sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
1702 This driver can also be built as a module. If so, the module will
1703 be called sbtsi_temp.
1705 config SENSORS_SBRMI
1706 tristate "Emulated SB-RMI sensor"
1709 If you say yes here you get support for emulated RMI
1710 sensors on AMD SoCs with APML interface connected to a BMC device.
1712 This driver can also be built as a module. If so, the module will
1715 config SENSORS_SHT15
1716 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1717 depends on GPIOLIB || COMPILE_TEST
1720 If you say yes here you get support for the Sensiron SHT10, SHT11,
1721 SHT15, SHT71, SHT75 humidity and temperature sensors.
1723 This driver can also be built as a module. If so, the module
1724 will be called sht15.
1726 config SENSORS_SHT21
1727 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1730 If you say yes here you get support for the Sensiron SHT21, SHT25
1731 humidity and temperature sensors.
1733 This driver can also be built as a module. If so, the module
1734 will be called sht21.
1736 config SENSORS_SHT3x
1737 tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
1741 If you say yes here you get support for the Sensiron SHT30 and SHT31
1742 humidity and temperature sensors.
1744 This driver can also be built as a module. If so, the module
1745 will be called sht3x.
1747 config SENSORS_SHT4x
1748 tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
1752 If you say yes here you get support for the Sensiron SHT40, SHT41 and
1753 SHT45 humidity and temperature sensors.
1755 This driver can also be built as a module. If so, the module
1756 will be called sht4x.
1758 config SENSORS_SHTC1
1759 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
1762 If you say yes here you get support for the Sensiron SHTC1, SHTW1,
1763 and SHTC3 humidity and temperature sensors.
1765 This driver can also be built as a module. If so, the module
1766 will be called shtc1.
1768 config SENSORS_SIS5595
1769 tristate "Silicon Integrated Systems Corp. SiS5595"
1772 If you say yes here you get support for the integrated sensors in
1773 SiS5595 South Bridges.
1775 This driver can also be built as a module. If so, the module
1776 will be called sis5595.
1778 config SENSORS_SY7636A
1779 tristate "Silergy SY7636A"
1780 depends on MFD_SY7636A
1782 If you say yes here you get support for the thermistor readout of
1783 the Silergy SY7636A PMIC.
1785 This driver can also be built as a module. If so, the module
1786 will be called sy7636a-hwmon.
1788 config SENSORS_DME1737
1789 tristate "SMSC DME1737, SCH311x and compatibles"
1790 depends on I2C && !PPC
1793 If you say yes here you get support for the hardware monitoring
1794 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1795 Asus A8000 Super-I/O chips.
1797 This driver can also be built as a module. If so, the module
1798 will be called dme1737.
1800 config SENSORS_EMC1403
1801 tristate "SMSC EMC1403/23 thermal sensor"
1805 If you say yes here you get support for the SMSC EMC1403/23
1806 temperature monitoring chip.
1808 Threshold values can be configured using sysfs.
1809 Data from the different diodes are accessible via sysfs.
1811 config SENSORS_EMC2103
1812 tristate "SMSC EMC2103"
1815 If you say yes here you get support for the temperature
1816 and fan sensors of the SMSC EMC2103 chips.
1818 This driver can also be built as a module. If so, the module
1819 will be called emc2103.
1821 config SENSORS_EMC2305
1822 tristate "Microchip EMC2305 and compatible EMC2301/2/3"
1826 If you say yes here you get support for the Microchip EMC2305
1827 fan controller chips.
1828 The Microchip EMC2305 is a fan controller for up to 5 fans.
1829 Fan rotation speeds are reported in RPM.
1831 This driver can also be built as a module. If so, the module
1832 will be called emc2305.
1834 config SENSORS_EMC6W201
1835 tristate "SMSC EMC6W201"
1838 If you say yes here you get support for the SMSC EMC6W201
1839 hardware monitoring chip.
1841 This driver can also be built as a module. If so, the module
1842 will be called emc6w201.
1844 config SENSORS_SMSC47M1
1845 tristate "SMSC LPC47M10x and compatibles"
1848 If you say yes here you get support for the integrated fan
1849 monitoring and control capabilities of the SMSC LPC47B27x,
1850 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1851 LPC47M192, LPC47M292 and LPC47M997 chips.
1853 The temperature and voltage sensor features of the LPC47M15x,
1854 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1855 driver, select also "SMSC LPC47M192 and compatibles" below for
1858 This driver can also be built as a module. If so, the module
1859 will be called smsc47m1.
1861 config SENSORS_SMSC47M192
1862 tristate "SMSC LPC47M192 and compatibles"
1866 If you say yes here you get support for the temperature and
1867 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1868 and LPC47M997 chips.
1870 The fan monitoring and control capabilities of these chips
1871 are supported by another driver, select
1872 "SMSC LPC47M10x and compatibles" above. You need both drivers
1873 if you want fan control and voltage/temperature sensor support.
1875 This driver can also be built as a module. If so, the module
1876 will be called smsc47m192.
1878 config SENSORS_SMSC47B397
1879 tristate "SMSC LPC47B397-NC"
1882 If you say yes here you get support for the SMSC LPC47B397-NC
1885 This driver can also be built as a module. If so, the module
1886 will be called smsc47b397.
1888 config SENSORS_SCH56XX_COMMON
1891 config SENSORS_SCH5627
1892 tristate "SMSC SCH5627"
1893 depends on !PPC && WATCHDOG
1894 select SENSORS_SCH56XX_COMMON
1895 select WATCHDOG_CORE
1897 If you say yes here you get support for the hardware monitoring
1898 features of the SMSC SCH5627 Super-I/O chip including support for
1899 the integrated watchdog.
1901 This driver can also be built as a module. If so, the module
1902 will be called sch5627.
1904 config SENSORS_SCH5636
1905 tristate "SMSC SCH5636"
1906 depends on !PPC && WATCHDOG
1907 select SENSORS_SCH56XX_COMMON
1908 select WATCHDOG_CORE
1910 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1911 hardware monitoring solutions, allowing motherboard manufacturers to
1912 create their own custom hwmon solution based upon the SCH5636.
1914 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1915 hwmon solution. Say yes here if you want support for the Fujitsu
1916 Theseus' hardware monitoring features including support for the
1917 integrated watchdog.
1919 This driver can also be built as a module. If so, the module
1920 will be called sch5636.
1922 config SENSORS_STTS751
1923 tristate "ST Microelectronics STTS751"
1926 If you say yes here you get support for STTS751
1927 temperature sensor chips.
1929 This driver can also be built as a module. If so, the module
1930 will be called stts751.
1932 config SENSORS_SFCTEMP
1933 tristate "Starfive JH71x0 temperature sensor"
1934 depends on ARCH_STARFIVE || COMPILE_TEST
1936 If you say yes here you get support for temperature sensor
1937 on the Starfive JH71x0 SoCs.
1939 This driver can also be built as a module. If so, the module
1940 will be called sfctemp.
1942 config SENSORS_SMM665
1943 tristate "Summit Microelectronics SMM665"
1946 If you say yes here you get support for the hardware monitoring
1947 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1948 Active DC Output Controller / Monitor.
1950 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1951 Support for those chips is untested.
1953 This driver can also be built as a module. If so, the module will
1956 config SENSORS_ADC128D818
1957 tristate "Texas Instruments ADC128D818"
1960 If you say yes here you get support for the Texas Instruments
1961 ADC128D818 System Monitor with Temperature Sensor chip.
1963 This driver can also be built as a module. If so, the module
1964 will be called adc128d818.
1966 config SENSORS_ADS7828
1967 tristate "Texas Instruments ADS7828 and compatibles"
1971 If you say yes here you get support for Texas Instruments ADS7828 and
1972 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1973 it is 8-bit on ADS7830.
1975 This driver can also be built as a module. If so, the module
1976 will be called ads7828.
1978 config SENSORS_ADS7871
1979 tristate "Texas Instruments ADS7871 A/D converter"
1982 If you say yes here you get support for TI ADS7871 & ADS7870
1984 This driver can also be built as a module. If so, the module
1985 will be called ads7871.
1987 config SENSORS_AMC6821
1988 tristate "Texas Instruments AMC6821"
1991 If you say yes here you get support for the Texas Instruments
1992 AMC6821 hardware monitoring chips.
1994 This driver can also be built as a module. If so, the module
1995 will be called amc6821.
1997 config SENSORS_INA209
1998 tristate "TI / Burr Brown INA209"
2001 If you say yes here you get support for the TI / Burr Brown INA209
2002 voltage / current / power monitor I2C interface.
2004 This driver can also be built as a module. If so, the module will
2007 config SENSORS_INA2XX
2008 tristate "Texas Instruments INA219 and compatibles"
2012 If you say yes here you get support for INA219, INA220, INA226,
2013 INA230, and INA231 power monitor chips.
2015 The INA2xx driver is configured for the default configuration of
2016 the part as described in the datasheet.
2017 Default value for Rshunt is 10 mOhms.
2018 This driver can also be built as a module. If so, the module
2019 will be called ina2xx.
2021 config SENSORS_INA238
2022 tristate "Texas Instruments INA238"
2026 If you say yes here you get support for the INA238 power monitor
2027 chip. This driver supports voltage, current, power and temperature
2028 measurements as well as alarm configuration.
2030 This driver can also be built as a module. If so, the module
2031 will be called ina238.
2033 config SENSORS_INA3221
2034 tristate "Texas Instruments INA3221 Triple Power Monitor"
2038 If you say yes here you get support for the TI INA3221 Triple Power
2041 This driver can also be built as a module. If so, the module
2042 will be called ina3221.
2045 tristate "Microchip TC74"
2048 If you say yes here you get support for Microchip TC74 single
2049 input temperature sensor chips.
2051 This driver can also be built as a module. If so, the module
2052 will be called tc74.
2054 config SENSORS_THMC50
2055 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
2058 If you say yes here you get support for Texas Instruments THMC50
2059 sensor chips and clones: the Analog Devices ADM1022.
2061 This driver can also be built as a module. If so, the module
2062 will be called thmc50.
2064 config SENSORS_TMP102
2065 tristate "Texas Instruments TMP102"
2069 If you say yes here you get support for Texas Instruments TMP102
2072 This driver can also be built as a module. If so, the module
2073 will be called tmp102.
2075 config SENSORS_TMP103
2076 tristate "Texas Instruments TMP103"
2080 If you say yes here you get support for Texas Instruments TMP103
2083 This driver can also be built as a module. If so, the module
2084 will be called tmp103.
2086 config SENSORS_TMP108
2087 tristate "Texas Instruments TMP108"
2091 If you say yes here you get support for Texas Instruments TMP108
2094 This driver can also be built as a module. If so, the module
2095 will be called tmp108.
2097 config SENSORS_TMP401
2098 tristate "Texas Instruments TMP401 and compatibles"
2102 If you say yes here you get support for Texas Instruments TMP401,
2103 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
2105 This driver can also be built as a module. If so, the module
2106 will be called tmp401.
2108 config SENSORS_TMP421
2109 tristate "Texas Instruments TMP421 and compatible"
2112 If you say yes here you get support for Texas Instruments TMP421,
2113 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
2115 This driver can also be built as a module. If so, the module
2116 will be called tmp421.
2118 config SENSORS_TMP464
2119 tristate "Texas Instruments TMP464 and compatible"
2123 If you say yes here you get support for Texas Instruments TMP464
2124 and TMP468 temperature sensor chips.
2126 This driver can also be built as a module. If so, the module
2127 will be called tmp464.
2129 config SENSORS_TMP513
2130 tristate "Texas Instruments TMP513 and compatibles"
2133 If you say yes here you get support for Texas Instruments TMP512,
2134 and TMP513 temperature and power supply sensor chips.
2136 This driver can also be built as a module. If so, the module
2137 will be called tmp513.
2139 config SENSORS_VEXPRESS
2140 tristate "Versatile Express"
2141 depends on VEXPRESS_CONFIG
2143 This driver provides support for hardware sensors available on
2144 the ARM Ltd's Versatile Express platform. It can provide wide
2145 range of information like temperature, power, energy.
2147 config SENSORS_VIA_CPUTEMP
2148 tristate "VIA CPU temperature sensor"
2152 If you say yes here you get support for the temperature
2153 sensor inside your CPU. Supported are all known variants of
2154 the VIA C7 and Nano.
2156 config SENSORS_VIA686A
2160 If you say yes here you get support for the integrated sensors in
2161 Via 686A/B South Bridges.
2163 This driver can also be built as a module. If so, the module
2164 will be called via686a.
2166 config SENSORS_VT1211
2167 tristate "VIA VT1211"
2171 If you say yes here then you get support for hardware monitoring
2172 features of the VIA VT1211 Super-I/O chip.
2174 This driver can also be built as a module. If so, the module
2175 will be called vt1211.
2177 config SENSORS_VT8231
2178 tristate "VIA VT8231"
2182 If you say yes here then you get support for the integrated sensors
2183 in the VIA VT8231 device.
2185 This driver can also be built as a module. If so, the module
2186 will be called vt8231.
2188 config SENSORS_W83773G
2189 tristate "Nuvoton W83773G"
2193 If you say yes here you get support for the Nuvoton W83773G hardware
2196 This driver can also be built as a module. If so, the module
2197 will be called w83773g.
2199 config SENSORS_W83781D
2200 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
2204 If you say yes here you get support for the Winbond W8378x series
2205 of sensor chips: the W83781D, W83782D and W83783S, and the similar
2208 This driver can also be built as a module. If so, the module
2209 will be called w83781d.
2211 config SENSORS_W83791D
2212 tristate "Winbond W83791D"
2216 If you say yes here you get support for the Winbond W83791D chip.
2218 This driver can also be built as a module. If so, the module
2219 will be called w83791d.
2221 config SENSORS_W83792D
2222 tristate "Winbond W83792D"
2225 If you say yes here you get support for the Winbond W83792D chip.
2227 This driver can also be built as a module. If so, the module
2228 will be called w83792d.
2230 config SENSORS_W83793
2231 tristate "Winbond W83793"
2235 If you say yes here you get support for the Winbond W83793
2236 hardware monitoring chip, including support for the integrated
2239 This driver can also be built as a module. If so, the module
2240 will be called w83793.
2242 config SENSORS_W83795
2243 tristate "Winbond/Nuvoton W83795G/ADG"
2246 If you say yes here you get support for the Winbond W83795G and
2247 W83795ADG hardware monitoring chip, including manual fan speed
2250 This driver can also be built as a module. If so, the module
2251 will be called w83795.
2253 config SENSORS_W83795_FANCTRL
2254 bool "Include automatic fan control support"
2255 depends on SENSORS_W83795
2257 If you say yes here, support for automatic fan speed control
2258 will be included in the driver.
2260 Please also note that this option will create sysfs attribute
2261 files which may change in the future, so you shouldn't rely
2262 on them being stable.
2264 config SENSORS_W83L785TS
2265 tristate "Winbond W83L785TS-S"
2268 If you say yes here you get support for the Winbond W83L785TS-S
2269 sensor chip, which is used on the Asus A7N8X, among other
2272 This driver can also be built as a module. If so, the module
2273 will be called w83l785ts.
2275 config SENSORS_W83L786NG
2276 tristate "Winbond W83L786NG, W83L786NR"
2279 If you say yes here you get support for the Winbond W83L786NG
2280 and W83L786NR sensor chips.
2282 This driver can also be built as a module. If so, the module
2283 will be called w83l786ng.
2285 config SENSORS_W83627HF
2286 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
2290 If you say yes here you get support for the Winbond W836X7 series
2291 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
2294 This driver can also be built as a module. If so, the module
2295 will be called w83627hf.
2297 config SENSORS_W83627EHF
2298 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
2302 If you say yes here you get support for the hardware
2303 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
2305 This driver also supports the W83627EHG, which is the lead-free
2306 version of the W83627EHF, and the W83627DHG, which is a similar
2307 chip suited for specific Intel processors that use PECI such as
2308 the Core 2 Duo. And also the W83627UHG, which is a stripped down
2309 version of the W83627DHG (as far as hardware monitoring goes.)
2311 This driver also supports Nuvoton W83667HG and W83667HG-B.
2313 This driver can also be built as a module. If so, the module
2314 will be called w83627ehf.
2316 config SENSORS_WM831X
2317 tristate "WM831x PMICs"
2318 depends on MFD_WM831X
2320 If you say yes here you get support for the hardware
2321 monitoring functionality of the Wolfson Microelectronics
2322 WM831x series of PMICs.
2324 This driver can also be built as a module. If so, the module
2325 will be called wm831x-hwmon.
2327 config SENSORS_WM8350
2328 tristate "Wolfson Microelectronics WM835x"
2329 depends on MFD_WM8350
2331 If you say yes here you get support for the hardware
2332 monitoring features of the WM835x series of PMICs.
2334 This driver can also be built as a module. If so, the module
2335 will be called wm8350-hwmon.
2337 config SENSORS_ULTRA45
2338 tristate "Sun Ultra45 PIC16F747"
2341 This driver provides support for the Ultra45 workstation environmental
2344 config SENSORS_XGENE
2345 tristate "APM X-Gene SoC hardware monitoring driver"
2346 depends on XGENE_SLIMPRO_MBOX || PCC
2348 If you say yes here you get support for the temperature
2349 and power sensors for APM X-Gene SoC.
2351 config SENSORS_INTEL_M10_BMC_HWMON
2352 tristate "Intel MAX10 BMC Hardware Monitoring"
2353 depends on MFD_INTEL_M10_BMC_CORE
2355 This driver provides support for the hardware monitoring functionality
2356 on Intel MAX10 BMC chip.
2358 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
2359 sensors monitor various telemetry data of different components on the
2360 card, e.g. board temperature, FPGA core temperature/voltage/current.
2364 comment "ACPI drivers"
2366 config SENSORS_ACPI_POWER
2367 tristate "ACPI 4.0 power meter"
2369 This driver exposes ACPI 4.0 power meters as hardware monitoring
2370 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
2373 To compile this driver as a module, choose M here:
2374 the module will be called acpi_power_meter.
2376 config SENSORS_ATK0110
2377 tristate "ASUS ATK0110"
2380 If you say yes here you get support for the ACPI hardware
2381 monitoring interface found in many ASUS motherboards. This
2382 driver will provide readings of fans, voltages and temperatures
2383 through the system firmware.
2385 This driver can also be built as a module. If so, the module
2386 will be called asus_atk0110.
2388 config SENSORS_ASUS_WMI
2389 tristate "ASUS WMI X370/X470/B450/X399"
2392 If you say yes here you get support for the ACPI hardware monitoring
2393 interface found in X370/X470/B450/X399 ASUS motherboards. This driver
2394 will provide readings of fans, voltages and temperatures through the system
2397 This driver can also be built as a module. If so, the module
2398 will be called asus_wmi_sensors.
2400 config SENSORS_ASUS_EC
2401 tristate "ASUS EC Sensors"
2404 If you say yes here you get support for the ACPI embedded controller
2405 hardware monitoring interface found in ASUS motherboards. The driver
2406 currently supports B550/X570 boards, although other ASUS boards might
2407 provide this monitoring interface as well.
2409 This driver can also be built as a module. If so, the module
2410 will be called asus_ec_sensors.