1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) STMicroelectronics SA 2014
4 * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
8 #include <linux/component.h>
9 #include <linux/debugfs.h>
10 #include <linux/module.h>
11 #include <linux/of_gpio.h>
12 #include <linux/platform_device.h>
14 #include <drm/drm_atomic_helper.h>
15 #include <drm/drm_bridge.h>
16 #include <drm/drm_device.h>
17 #include <drm/drm_panel.h>
18 #include <drm/drm_print.h>
19 #include <drm/drm_probe_helper.h>
21 #include "sti_awg_utils.h"
23 #include "sti_mixer.h"
26 #define DVO_AWG_DIGSYNC_CTRL 0x0000
27 #define DVO_DOF_CFG 0x0004
28 #define DVO_LUT_PROG_LOW 0x0008
29 #define DVO_LUT_PROG_MID 0x000C
30 #define DVO_LUT_PROG_HIGH 0x0010
31 #define DVO_DIGSYNC_INSTR_I 0x0100
33 #define DVO_AWG_CTRL_EN BIT(0)
34 #define DVO_AWG_FRAME_BASED_SYNC BIT(2)
36 #define DVO_DOF_EN_LOWBYTE BIT(0)
37 #define DVO_DOF_EN_MIDBYTE BIT(1)
38 #define DVO_DOF_EN_HIGHBYTE BIT(2)
39 #define DVO_DOF_EN BIT(6)
40 #define DVO_DOF_MOD_COUNT_SHIFT 8
42 #define DVO_LUT_ZERO 0
44 #define DVO_LUT_Y_G_DEL 2
45 #define DVO_LUT_CB_B 3
46 #define DVO_LUT_CB_B_DEL 4
47 #define DVO_LUT_CR_R 5
48 #define DVO_LUT_CR_R_DEL 6
49 #define DVO_LUT_HOLD 7
57 struct awg_code_generation_params *fw_gen_params,
58 struct awg_timing *timing);
61 static struct dvo_config rgb_24bit_de_cfg = {
62 .flags = (0L << DVO_DOF_MOD_COUNT_SHIFT),
63 .lowbyte = DVO_LUT_CR_R,
64 .midbyte = DVO_LUT_Y_G,
65 .highbyte = DVO_LUT_CB_B,
66 .awg_fwgen_fct = sti_awg_generate_code_data_enable_mode,
70 * STI digital video output structure
73 * @drm_dev: pointer to drm device
74 * @mode: current display mode selected
75 * @regs: dvo registers
76 * @clk_pix: pixel clock for dvo
78 * @clk_main_parent: dvo parent clock if main path used
79 * @clk_aux_parent: dvo parent clock if aux path used
80 * @panel_node: panel node reference from device tree
81 * @panel: reference to the panel connected to the dvo
82 * @enabled: true if dvo is enabled else false
83 * @encoder: drm_encoder it is bound
87 struct drm_device *drm_dev;
88 struct drm_display_mode mode;
92 struct clk *clk_main_parent;
93 struct clk *clk_aux_parent;
94 struct device_node *panel_node;
95 struct drm_panel *panel;
96 struct dvo_config *config;
98 struct drm_encoder *encoder;
99 struct drm_bridge *bridge;
102 struct sti_dvo_connector {
103 struct drm_connector drm_connector;
104 struct drm_encoder *encoder;
108 #define to_sti_dvo_connector(x) \
109 container_of(x, struct sti_dvo_connector, drm_connector)
111 #define BLANKING_LEVEL 16
112 static int dvo_awg_generate_code(struct sti_dvo *dvo, u8 *ram_size, u32 *ram_code)
114 struct drm_display_mode *mode = &dvo->mode;
115 struct dvo_config *config = dvo->config;
116 struct awg_code_generation_params fw_gen_params;
117 struct awg_timing timing;
119 fw_gen_params.ram_code = ram_code;
120 fw_gen_params.instruction_offset = 0;
122 timing.total_lines = mode->vtotal;
123 timing.active_lines = mode->vdisplay;
124 timing.blanking_lines = mode->vsync_start - mode->vdisplay;
125 timing.trailing_lines = mode->vtotal - mode->vsync_start;
126 timing.total_pixels = mode->htotal;
127 timing.active_pixels = mode->hdisplay;
128 timing.blanking_pixels = mode->hsync_start - mode->hdisplay;
129 timing.trailing_pixels = mode->htotal - mode->hsync_start;
130 timing.blanking_level = BLANKING_LEVEL;
132 if (config->awg_fwgen_fct(&fw_gen_params, &timing)) {
133 DRM_ERROR("AWG firmware not properly generated\n");
137 *ram_size = fw_gen_params.instruction_offset;
142 /* Configure AWG, writing instructions
144 * @dvo: pointer to DVO structure
145 * @awg_ram_code: pointer to AWG instructions table
146 * @nb: nb of AWG instructions
148 static void dvo_awg_configure(struct sti_dvo *dvo, u32 *awg_ram_code, int nb)
152 DRM_DEBUG_DRIVER("\n");
154 for (i = 0; i < nb; i++)
155 writel(awg_ram_code[i],
156 dvo->regs + DVO_DIGSYNC_INSTR_I + i * 4);
157 for (i = nb; i < AWG_MAX_INST; i++)
158 writel(0, dvo->regs + DVO_DIGSYNC_INSTR_I + i * 4);
160 writel(DVO_AWG_CTRL_EN, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
163 #define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \
164 readl(dvo->regs + reg))
166 static void dvo_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
171 seq_puts(s, " DVO AWG microcode:");
172 for (i = 0; i < AWG_MAX_INST; i++) {
174 seq_printf(s, "\n %04X:", i);
175 seq_printf(s, " %04X", readl(reg + i * 4));
179 static int dvo_dbg_show(struct seq_file *s, void *data)
181 struct drm_info_node *node = s->private;
182 struct sti_dvo *dvo = (struct sti_dvo *)node->info_ent->data;
184 seq_printf(s, "DVO: (vaddr = 0x%p)", dvo->regs);
185 DBGFS_DUMP(DVO_AWG_DIGSYNC_CTRL);
186 DBGFS_DUMP(DVO_DOF_CFG);
187 DBGFS_DUMP(DVO_LUT_PROG_LOW);
188 DBGFS_DUMP(DVO_LUT_PROG_MID);
189 DBGFS_DUMP(DVO_LUT_PROG_HIGH);
190 dvo_dbg_awg_microcode(s, dvo->regs + DVO_DIGSYNC_INSTR_I);
195 static struct drm_info_list dvo_debugfs_files[] = {
196 { "dvo", dvo_dbg_show, 0, NULL },
199 static void dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
203 for (i = 0; i < ARRAY_SIZE(dvo_debugfs_files); i++)
204 dvo_debugfs_files[i].data = dvo;
206 drm_debugfs_create_files(dvo_debugfs_files,
207 ARRAY_SIZE(dvo_debugfs_files),
208 minor->debugfs_root, minor);
211 static void sti_dvo_disable(struct drm_bridge *bridge)
213 struct sti_dvo *dvo = bridge->driver_private;
218 DRM_DEBUG_DRIVER("\n");
220 if (dvo->config->awg_fwgen_fct)
221 writel(0x00000000, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
223 writel(0x00000000, dvo->regs + DVO_DOF_CFG);
225 drm_panel_disable(dvo->panel);
227 /* Disable/unprepare dvo clock */
228 clk_disable_unprepare(dvo->clk_pix);
229 clk_disable_unprepare(dvo->clk);
231 dvo->enabled = false;
234 static void sti_dvo_pre_enable(struct drm_bridge *bridge)
236 struct sti_dvo *dvo = bridge->driver_private;
237 struct dvo_config *config = dvo->config;
240 DRM_DEBUG_DRIVER("\n");
245 /* Make sure DVO is disabled */
246 writel(0x00000000, dvo->regs + DVO_DOF_CFG);
247 writel(0x00000000, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
249 if (config->awg_fwgen_fct) {
251 u32 awg_ram_code[AWG_MAX_INST];
253 if (!dvo_awg_generate_code(dvo, &nb_instr, awg_ram_code))
254 dvo_awg_configure(dvo, awg_ram_code, nb_instr);
259 /* Prepare/enable clocks */
260 if (clk_prepare_enable(dvo->clk_pix))
261 DRM_ERROR("Failed to prepare/enable dvo_pix clk\n");
262 if (clk_prepare_enable(dvo->clk))
263 DRM_ERROR("Failed to prepare/enable dvo clk\n");
265 drm_panel_enable(dvo->panel);
268 writel(config->lowbyte, dvo->regs + DVO_LUT_PROG_LOW);
269 writel(config->midbyte, dvo->regs + DVO_LUT_PROG_MID);
270 writel(config->highbyte, dvo->regs + DVO_LUT_PROG_HIGH);
272 /* Digital output formatter config */
273 val = (config->flags | DVO_DOF_EN);
274 writel(val, dvo->regs + DVO_DOF_CFG);
279 static void sti_dvo_set_mode(struct drm_bridge *bridge,
280 const struct drm_display_mode *mode,
281 const struct drm_display_mode *adjusted_mode)
283 struct sti_dvo *dvo = bridge->driver_private;
284 struct sti_mixer *mixer = to_sti_mixer(dvo->encoder->crtc);
285 int rate = mode->clock * 1000;
289 DRM_DEBUG_DRIVER("\n");
291 memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
293 /* According to the path used (main or aux), the dvo clocks should
294 * have a different parent clock. */
295 if (mixer->id == STI_MIXER_MAIN)
296 clkp = dvo->clk_main_parent;
298 clkp = dvo->clk_aux_parent;
301 clk_set_parent(dvo->clk_pix, clkp);
302 clk_set_parent(dvo->clk, clkp);
305 /* DVO clocks = compositor clock */
306 ret = clk_set_rate(dvo->clk_pix, rate);
308 DRM_ERROR("Cannot set rate (%dHz) for dvo_pix clk\n", rate);
312 ret = clk_set_rate(dvo->clk, rate);
314 DRM_ERROR("Cannot set rate (%dHz) for dvo clk\n", rate);
318 /* For now, we only support 24bit data enable (DE) synchro format */
319 dvo->config = &rgb_24bit_de_cfg;
322 static void sti_dvo_bridge_nope(struct drm_bridge *bridge)
327 static const struct drm_bridge_funcs sti_dvo_bridge_funcs = {
328 .pre_enable = sti_dvo_pre_enable,
329 .enable = sti_dvo_bridge_nope,
330 .disable = sti_dvo_disable,
331 .post_disable = sti_dvo_bridge_nope,
332 .mode_set = sti_dvo_set_mode,
335 static int sti_dvo_connector_get_modes(struct drm_connector *connector)
337 struct sti_dvo_connector *dvo_connector
338 = to_sti_dvo_connector(connector);
339 struct sti_dvo *dvo = dvo_connector->dvo;
342 return drm_panel_get_modes(dvo->panel, connector);
347 #define CLK_TOLERANCE_HZ 50
349 static int sti_dvo_connector_mode_valid(struct drm_connector *connector,
350 struct drm_display_mode *mode)
352 int target = mode->clock * 1000;
353 int target_min = target - CLK_TOLERANCE_HZ;
354 int target_max = target + CLK_TOLERANCE_HZ;
356 struct sti_dvo_connector *dvo_connector
357 = to_sti_dvo_connector(connector);
358 struct sti_dvo *dvo = dvo_connector->dvo;
360 result = clk_round_rate(dvo->clk_pix, target);
362 DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n",
365 if ((result < target_min) || (result > target_max)) {
366 DRM_DEBUG_DRIVER("dvo pixclk=%d not supported\n", target);
374 struct drm_connector_helper_funcs sti_dvo_connector_helper_funcs = {
375 .get_modes = sti_dvo_connector_get_modes,
376 .mode_valid = sti_dvo_connector_mode_valid,
379 static enum drm_connector_status
380 sti_dvo_connector_detect(struct drm_connector *connector, bool force)
382 struct sti_dvo_connector *dvo_connector
383 = to_sti_dvo_connector(connector);
384 struct sti_dvo *dvo = dvo_connector->dvo;
386 DRM_DEBUG_DRIVER("\n");
389 dvo->panel = of_drm_find_panel(dvo->panel_node);
390 if (IS_ERR(dvo->panel))
395 return connector_status_connected;
397 return connector_status_disconnected;
400 static int sti_dvo_late_register(struct drm_connector *connector)
402 struct sti_dvo_connector *dvo_connector
403 = to_sti_dvo_connector(connector);
404 struct sti_dvo *dvo = dvo_connector->dvo;
406 dvo_debugfs_init(dvo, dvo->drm_dev->primary);
411 static const struct drm_connector_funcs sti_dvo_connector_funcs = {
412 .fill_modes = drm_helper_probe_single_connector_modes,
413 .detect = sti_dvo_connector_detect,
414 .destroy = drm_connector_cleanup,
415 .reset = drm_atomic_helper_connector_reset,
416 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
417 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
418 .late_register = sti_dvo_late_register,
421 static struct drm_encoder *sti_dvo_find_encoder(struct drm_device *dev)
423 struct drm_encoder *encoder;
425 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
426 if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
433 static int sti_dvo_bind(struct device *dev, struct device *master, void *data)
435 struct sti_dvo *dvo = dev_get_drvdata(dev);
436 struct drm_device *drm_dev = data;
437 struct drm_encoder *encoder;
438 struct sti_dvo_connector *connector;
439 struct drm_connector *drm_connector;
440 struct drm_bridge *bridge;
443 /* Set the drm device handle */
444 dvo->drm_dev = drm_dev;
446 encoder = sti_dvo_find_encoder(drm_dev);
450 connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
454 connector->dvo = dvo;
456 bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
460 bridge->driver_private = dvo;
461 bridge->funcs = &sti_dvo_bridge_funcs;
462 bridge->of_node = dvo->dev.of_node;
463 drm_bridge_add(bridge);
465 err = drm_bridge_attach(encoder, bridge, NULL, 0);
469 dvo->bridge = bridge;
470 connector->encoder = encoder;
471 dvo->encoder = encoder;
473 drm_connector = (struct drm_connector *)connector;
475 drm_connector->polled = DRM_CONNECTOR_POLL_HPD;
477 drm_connector_init(drm_dev, drm_connector,
478 &sti_dvo_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
479 drm_connector_helper_add(drm_connector,
480 &sti_dvo_connector_helper_funcs);
482 err = drm_connector_attach_encoder(drm_connector, encoder);
484 DRM_ERROR("Failed to attach a connector to a encoder\n");
491 drm_bridge_remove(bridge);
495 static void sti_dvo_unbind(struct device *dev,
496 struct device *master, void *data)
498 struct sti_dvo *dvo = dev_get_drvdata(dev);
500 drm_bridge_remove(dvo->bridge);
503 static const struct component_ops sti_dvo_ops = {
504 .bind = sti_dvo_bind,
505 .unbind = sti_dvo_unbind,
508 static int sti_dvo_probe(struct platform_device *pdev)
510 struct device *dev = &pdev->dev;
512 struct resource *res;
513 struct device_node *np = dev->of_node;
515 DRM_INFO("%s\n", __func__);
517 dvo = devm_kzalloc(dev, sizeof(*dvo), GFP_KERNEL);
519 DRM_ERROR("Failed to allocate memory for DVO\n");
523 dvo->dev = pdev->dev;
525 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dvo-reg");
527 DRM_ERROR("Invalid dvo resource\n");
530 dvo->regs = devm_ioremap(dev, res->start,
535 dvo->clk_pix = devm_clk_get(dev, "dvo_pix");
536 if (IS_ERR(dvo->clk_pix)) {
537 DRM_ERROR("Cannot get dvo_pix clock\n");
538 return PTR_ERR(dvo->clk_pix);
541 dvo->clk = devm_clk_get(dev, "dvo");
542 if (IS_ERR(dvo->clk)) {
543 DRM_ERROR("Cannot get dvo clock\n");
544 return PTR_ERR(dvo->clk);
547 dvo->clk_main_parent = devm_clk_get(dev, "main_parent");
548 if (IS_ERR(dvo->clk_main_parent)) {
549 DRM_DEBUG_DRIVER("Cannot get main_parent clock\n");
550 dvo->clk_main_parent = NULL;
553 dvo->clk_aux_parent = devm_clk_get(dev, "aux_parent");
554 if (IS_ERR(dvo->clk_aux_parent)) {
555 DRM_DEBUG_DRIVER("Cannot get aux_parent clock\n");
556 dvo->clk_aux_parent = NULL;
559 dvo->panel_node = of_parse_phandle(np, "sti,panel", 0);
560 if (!dvo->panel_node)
561 DRM_ERROR("No panel associated to the dvo output\n");
562 of_node_put(dvo->panel_node);
564 platform_set_drvdata(pdev, dvo);
566 return component_add(&pdev->dev, &sti_dvo_ops);
569 static int sti_dvo_remove(struct platform_device *pdev)
571 component_del(&pdev->dev, &sti_dvo_ops);
575 static const struct of_device_id dvo_of_match[] = {
576 { .compatible = "st,stih407-dvo", },
579 MODULE_DEVICE_TABLE(of, dvo_of_match);
581 struct platform_driver sti_dvo_driver = {
584 .owner = THIS_MODULE,
585 .of_match_table = dvo_of_match,
587 .probe = sti_dvo_probe,
588 .remove = sti_dvo_remove,
591 MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
592 MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
593 MODULE_LICENSE("GPL");