1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_BOE_HIMAX8279D
41 tristate "Boe Himax8279d panel"
43 depends on DRM_MIPI_DSI
44 depends on BACKLIGHT_CLASS_DEVICE
46 Say Y here if you want to enable support for Boe Himax8279d
47 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
48 24 bit RGB per pixel. It provides a MIPI DSI interface to
49 the host and has a built-in LED backlight.
51 config DRM_PANEL_BOE_TV101WUM_NL6
52 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
54 depends on DRM_MIPI_DSI
55 depends on BACKLIGHT_CLASS_DEVICE
57 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
58 45NA WUXGA PANEL DSI Video Mode panel
60 config DRM_PANEL_DSI_CM
61 tristate "Generic DSI command mode panels"
63 depends on DRM_MIPI_DSI
64 depends on BACKLIGHT_CLASS_DEVICE
66 DRM panel driver for DSI command mode panels with support for
67 embedded and external backlights.
70 tristate "Generic LVDS panel driver"
72 depends on BACKLIGHT_CLASS_DEVICE
73 select VIDEOMODE_HELPERS
75 This driver supports LVDS panels that don't require device-specific
76 handling of power supplies or control signals. It implements automatic
77 backlight handling if the panel is attached to a backlight controller.
79 config DRM_PANEL_SIMPLE
80 tristate "support for simple panels"
82 depends on BACKLIGHT_CLASS_DEVICE
84 select VIDEOMODE_HELPERS
87 DRM panel driver for dumb panels that need at most a regulator and
88 a GPIO to be powered up. Optionally a backlight can be attached so
89 that it can be automatically turned off when the panel goes into a
92 config DRM_PANEL_ELIDA_KD35T133
93 tristate "Elida KD35T133 panel driver"
95 depends on DRM_MIPI_DSI
96 depends on BACKLIGHT_CLASS_DEVICE
98 Say Y here if you want to enable support for the Elida
99 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
102 config DRM_PANEL_FEIXIN_K101_IM2BA02
103 tristate "Feixin K101 IM2BA02 panel"
105 depends on DRM_MIPI_DSI
106 depends on BACKLIGHT_CLASS_DEVICE
108 Say Y here if you want to enable support for the Feixin K101 IM2BA02
109 4-lane 800x1280 MIPI DSI panel.
111 config DRM_PANEL_FEIYANG_FY07024DI26A30D
112 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
114 depends on DRM_MIPI_DSI
115 depends on BACKLIGHT_CLASS_DEVICE
117 Say Y if you want to enable support for panels based on the
118 Feiyang FY07024DI26A30-D MIPI-DSI interface.
120 config DRM_PANEL_ILITEK_IL9322
121 tristate "Ilitek ILI9322 320x240 QVGA panels"
125 Say Y here if you want to enable support for Ilitek IL9322
126 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
128 config DRM_PANEL_ILITEK_ILI9341
129 tristate "Ilitek ILI9341 240x320 QVGA panels"
131 depends on DRM_KMS_HELPER
132 depends on DRM_KMS_CMA_HELPER
133 depends on BACKLIGHT_CLASS_DEVICE
136 Say Y here if you want to enable support for Ilitek IL9341
137 QVGA (240x320) RGB panels. support serial & parallel rgb
140 config DRM_PANEL_ILITEK_ILI9881C
141 tristate "Ilitek ILI9881C-based panels"
143 depends on DRM_MIPI_DSI
144 depends on BACKLIGHT_CLASS_DEVICE
146 Say Y if you want to enable support for panels based on the
147 Ilitek ILI9881c controller.
149 config DRM_PANEL_INNOLUX_EJ030NA
150 tristate "Innolux EJ030NA 320x480 LCD panel"
154 Say Y here to enable support for the Innolux/Chimei EJ030NA
155 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
156 and LDK handheld gaming consoles.
158 config DRM_PANEL_INNOLUX_P079ZCA
159 tristate "Innolux P079ZCA panel"
161 depends on DRM_MIPI_DSI
162 depends on BACKLIGHT_CLASS_DEVICE
164 Say Y here if you want to enable support for Innolux P079ZCA
165 TFT-LCD modules. The panel has a 1024x768 resolution and uses
166 24 bit RGB per pixel. It provides a MIPI DSI interface to
167 the host and has a built-in LED backlight.
169 config DRM_PANEL_JADARD_JD9365DA_H3
170 tristate "Jadard JD9365DA-H3 WUXGA DSI panel"
172 depends on DRM_MIPI_DSI
173 depends on BACKLIGHT_CLASS_DEVICE
175 Say Y here if you want to enable support for Jadard JD9365DA-H3
176 WUXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
177 800RGBx1280 dots at maximum.
179 config DRM_PANEL_JDI_LT070ME05000
180 tristate "JDI LT070ME05000 WUXGA DSI panel"
182 depends on DRM_MIPI_DSI
183 depends on BACKLIGHT_CLASS_DEVICE
185 Say Y here if you want to enable support for JDI DSI video mode
186 panel as found in Google Nexus 7 (2013) devices.
187 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
190 config DRM_PANEL_KHADAS_TS050
191 tristate "Khadas TS050 panel"
193 depends on DRM_MIPI_DSI
194 depends on BACKLIGHT_CLASS_DEVICE
196 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
197 panel module. The panel has a 1080x1920 resolution and uses
198 24 bit RGB per pixel. It provides a MIPI DSI interface to
199 the host, a built-in LED backlight and touch controller.
201 config DRM_PANEL_KINGDISPLAY_KD097D04
202 tristate "Kingdisplay kd097d04 panel"
204 depends on DRM_MIPI_DSI
205 depends on BACKLIGHT_CLASS_DEVICE
207 Say Y here if you want to enable support for Kingdisplay kd097d04
208 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
209 24 bit RGB per pixel. It provides a MIPI DSI interface to
210 the host and has a built-in LED backlight.
212 config DRM_PANEL_LEADTEK_LTK050H3146W
213 tristate "Leadtek LTK050H3146W panel"
215 depends on DRM_MIPI_DSI
216 depends on BACKLIGHT_CLASS_DEVICE
218 Say Y here if you want to enable support for Leadtek LTK050H3146W
219 TFT-LCD modules. The panel has a 720x1280 resolution and uses
220 24 bit RGB per pixel. It provides a MIPI DSI interface to
221 the host and has a built-in LED backlight.
223 config DRM_PANEL_LEADTEK_LTK500HD1829
224 tristate "Leadtek LTK500HD1829 panel"
226 depends on DRM_MIPI_DSI
227 depends on BACKLIGHT_CLASS_DEVICE
229 Say Y here if you want to enable support for Kingdisplay kd097d04
230 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
231 24 bit RGB per pixel. It provides a MIPI DSI interface to
232 the host and has a built-in LED backlight.
234 config DRM_PANEL_SAMSUNG_LD9040
235 tristate "Samsung LD9040 RGB/SPI panel"
237 select VIDEOMODE_HELPERS
239 config DRM_PANEL_LG_LB035Q02
240 tristate "LG LB035Q024573 RGB panel"
241 depends on GPIOLIB && OF && SPI
243 Say Y here if you want to enable support for the LB035Q02 RGB panel
244 (found on the Gumstix Overo Palo35 board). To compile this driver as
245 a module, choose M here.
247 config DRM_PANEL_LG_LG4573
248 tristate "LG4573 RGB/SPI panel"
250 select VIDEOMODE_HELPERS
252 Say Y here if you want to enable support for LG4573 RGB panel.
253 To compile this driver as a module, choose M here.
255 config DRM_PANEL_NEC_NL8048HL11
256 tristate "NEC NL8048HL11 RGB panel"
257 depends on GPIOLIB && OF && SPI
259 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
260 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
261 as a module, choose M here.
263 config DRM_PANEL_NOVATEK_NT35510
264 tristate "Novatek NT35510 RGB panel driver"
266 depends on DRM_MIPI_DSI
267 depends on BACKLIGHT_CLASS_DEVICE
269 Say Y here if you want to enable support for the panels built
270 around the Novatek NT35510 display controller, such as some
273 config DRM_PANEL_NOVATEK_NT36672A
274 tristate "Novatek NT36672A DSI panel"
276 depends on DRM_MIPI_DSI
277 depends on BACKLIGHT_CLASS_DEVICE
279 Say Y here if you want to enable support for the panels built
280 around the Novatek NT36672A display controller, such as some
281 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
283 config DRM_PANEL_NOVATEK_NT39016
284 tristate "Novatek NT39016 RGB/SPI panel"
286 depends on BACKLIGHT_CLASS_DEVICE
289 Say Y here if you want to enable support for the panels built
290 around the Novatek NT39016 display controller.
292 config DRM_PANEL_MANTIX_MLAF057WE51
293 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
295 depends on DRM_MIPI_DSI
296 depends on BACKLIGHT_CLASS_DEVICE
298 Say Y here if you want to enable support for the Mantix
299 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
300 has a resolution of 720x1440 pixels, a built in backlight and touch
303 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
304 tristate "Olimex LCD-OLinuXino panel"
307 depends on BACKLIGHT_CLASS_DEVICE
310 The panel is used with different sizes LCDs, from 480x272 to
311 1280x800, and 24 bit per pixel.
313 Say Y here if you want to enable support for Olimex Ltd.
316 config DRM_PANEL_ORISETECH_OTM8009A
317 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
319 depends on DRM_MIPI_DSI
320 depends on BACKLIGHT_CLASS_DEVICE
322 Say Y here if you want to enable support for Orise Technology
323 otm8009a 480x800 dsi 2dl panel.
325 config DRM_PANEL_OSD_OSD101T2587_53TS
326 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
328 depends on DRM_MIPI_DSI
329 depends on BACKLIGHT_CLASS_DEVICE
331 Say Y here if you want to enable support for One Stop Displays
332 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
334 config DRM_PANEL_PANASONIC_VVX10F034N00
335 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
337 depends on DRM_MIPI_DSI
338 depends on BACKLIGHT_CLASS_DEVICE
340 Say Y here if you want to enable support for Panasonic VVX10F034N00
341 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
344 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
345 tristate "Raspberry Pi 7-inch touchscreen panel"
346 depends on DRM_MIPI_DSI
348 Say Y here if you want to enable support for the Raspberry
349 Pi 7" Touchscreen. To compile this driver as a module,
352 config DRM_PANEL_RAYDIUM_RM67191
353 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
355 depends on DRM_MIPI_DSI
356 depends on BACKLIGHT_CLASS_DEVICE
358 Say Y here if you want to enable support for Raydium RM67191 FHD
359 (1080x1920) DSI panel.
361 config DRM_PANEL_RAYDIUM_RM68200
362 tristate "Raydium RM68200 720x1280 DSI video mode panel"
364 depends on DRM_MIPI_DSI
365 depends on BACKLIGHT_CLASS_DEVICE
367 Say Y here if you want to enable support for Raydium RM68200
368 720x1280 DSI video mode panel.
370 config DRM_PANEL_RONBO_RB070D30
371 tristate "Ronbo Electronics RB070D30 panel"
373 depends on DRM_MIPI_DSI
374 depends on BACKLIGHT_CLASS_DEVICE
376 Say Y here if you want to enable support for Ronbo Electronics
377 RB070D30 1024x600 DSI panel.
379 config DRM_PANEL_SAMSUNG_ATNA33XC20
380 tristate "Samsung ATNA33XC20 eDP panel"
382 depends on BACKLIGHT_CLASS_DEVICE
384 select DRM_DP_AUX_BUS
386 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
387 be handled by the DRM_PANEL_SIMPLE driver because its power
388 sequencing is non-standard.
390 config DRM_PANEL_SAMSUNG_DB7430
391 tristate "Samsung DB7430-based DPI panels"
392 depends on OF && SPI && GPIOLIB
393 depends on BACKLIGHT_CLASS_DEVICE
396 Say Y here if you want to enable support for the Samsung
397 DB7430 DPI display controller used in such devices as the
398 LMS397KF04 480x800 DPI panel.
400 config DRM_PANEL_SAMSUNG_S6D16D0
401 tristate "Samsung S6D16D0 DSI video mode panel"
403 depends on DRM_MIPI_DSI
404 select VIDEOMODE_HELPERS
406 config DRM_PANEL_SAMSUNG_S6E3HA2
407 tristate "Samsung S6E3HA2 DSI video mode panel"
409 depends on DRM_MIPI_DSI
410 depends on BACKLIGHT_CLASS_DEVICE
411 select VIDEOMODE_HELPERS
413 config DRM_PANEL_SAMSUNG_S6E63J0X03
414 tristate "Samsung S6E63J0X03 DSI command mode panel"
416 depends on DRM_MIPI_DSI
417 depends on BACKLIGHT_CLASS_DEVICE
418 select VIDEOMODE_HELPERS
420 config DRM_PANEL_SAMSUNG_S6E63M0
421 tristate "Samsung S6E63M0 RGB panel"
423 depends on BACKLIGHT_CLASS_DEVICE
425 Say Y here if you want to enable support for Samsung S6E63M0
426 AMOLED LCD panel. This panel can be accessed using SPI or
429 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
430 tristate "Samsung S6E63M0 RGB SPI interface"
432 depends on DRM_PANEL_SAMSUNG_S6E63M0
433 default DRM_PANEL_SAMSUNG_S6E63M0
436 Say Y here if you want to be able to access the Samsung
437 S6E63M0 panel using SPI.
439 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
440 tristate "Samsung S6E63M0 RGB DSI interface"
441 depends on DRM_MIPI_DSI
442 depends on DRM_PANEL_SAMSUNG_S6E63M0
444 Say Y here if you want to be able to access the Samsung
445 S6E63M0 panel using DSI.
447 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
448 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
451 select VIDEOMODE_HELPERS
453 config DRM_PANEL_SAMSUNG_S6E8AA0
454 tristate "Samsung S6E8AA0 DSI video mode panel"
457 select VIDEOMODE_HELPERS
459 config DRM_PANEL_SAMSUNG_SOFEF00
460 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
462 depends on DRM_MIPI_DSI
463 depends on BACKLIGHT_CLASS_DEVICE
464 select VIDEOMODE_HELPERS
466 Say Y or M here if you want to enable support for the Samsung AMOLED
467 command mode panels found in the OnePlus 6/6T smartphones.
469 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
471 config DRM_PANEL_SEIKO_43WVF1G
472 tristate "Seiko 43WVF1G panel"
474 depends on BACKLIGHT_CLASS_DEVICE
475 select VIDEOMODE_HELPERS
477 Say Y here if you want to enable support for the Seiko
478 43WVF1G controller for 800x480 LCD panels
480 config DRM_PANEL_SHARP_LQ101R1SX01
481 tristate "Sharp LQ101R1SX01 panel"
483 depends on DRM_MIPI_DSI
484 depends on BACKLIGHT_CLASS_DEVICE
486 Say Y here if you want to enable support for Sharp LQ101R1SX01
487 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
488 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
489 the host and has a built-in LED backlight.
491 To compile this driver as a module, choose M here: the module
492 will be called panel-sharp-lq101r1sx01.
494 config DRM_PANEL_SHARP_LS037V7DW01
495 tristate "Sharp LS037V7DW01 VGA LCD panel"
496 depends on GPIOLIB && OF && REGULATOR
498 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
499 (480x640) LCD panel (found on the TI SDP3430 board).
501 config DRM_PANEL_SHARP_LS043T1LE01
502 tristate "Sharp LS043T1LE01 qHD video mode panel"
504 depends on DRM_MIPI_DSI
505 depends on BACKLIGHT_CLASS_DEVICE
507 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
508 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
510 config DRM_PANEL_SITRONIX_ST7701
511 tristate "Sitronix ST7701 panel driver"
513 depends on DRM_MIPI_DSI
514 depends on BACKLIGHT_CLASS_DEVICE
516 Say Y here if you want to enable support for the Sitronix
517 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
520 config DRM_PANEL_SITRONIX_ST7703
521 tristate "Sitronix ST7703 based MIPI touchscreen panels"
523 depends on DRM_MIPI_DSI
524 depends on BACKLIGHT_CLASS_DEVICE
526 Say Y here if you want to enable support for Sitronix ST7703 based
527 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
528 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
529 in backlight and touch controller.
530 Touch input support is provided by the goodix driver and needs to be
533 config DRM_PANEL_SITRONIX_ST7789V
534 tristate "Sitronix ST7789V panel"
536 depends on BACKLIGHT_CLASS_DEVICE
538 Say Y here if you want to enable support for the Sitronix
539 ST7789V controller for 240x320 LCD panels
541 config DRM_PANEL_SONY_ACX424AKP
542 tristate "Sony ACX424AKP DSI command mode panel"
544 depends on DRM_MIPI_DSI
545 depends on BACKLIGHT_CLASS_DEVICE
546 select VIDEOMODE_HELPERS
548 Say Y here if you want to enable the Sony ACX424 display
549 panel. This panel supports DSI in both command and video
552 config DRM_PANEL_SONY_ACX565AKM
553 tristate "Sony ACX565AKM panel"
554 depends on GPIOLIB && OF && SPI
555 depends on BACKLIGHT_CLASS_DEVICE
557 Say Y here if you want to enable support for the Sony ACX565AKM
558 800x600 3.5" panel (found on the Nokia N900).
560 config DRM_PANEL_TDO_TL070WSH30
561 tristate "TDO TL070WSH30 DSI panel"
563 depends on DRM_MIPI_DSI
564 depends on BACKLIGHT_CLASS_DEVICE
566 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
567 panel module. The panel has a 1024×600 resolution and uses
568 24 bit RGB per pixel. It provides a MIPI DSI interface to
569 the host, a built-in LED backlight and touch controller.
571 config DRM_PANEL_TPO_TD028TTEC1
572 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
574 depends on BACKLIGHT_CLASS_DEVICE
576 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
577 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
579 config DRM_PANEL_TPO_TD043MTEA1
580 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
581 depends on GPIOLIB && OF && REGULATOR && SPI
583 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
584 4.3" panel (found on the OMAP3 Pandora board).
586 config DRM_PANEL_TPO_TPG110
587 tristate "TPO TPG 800x400 panel"
588 depends on OF && SPI && GPIOLIB
589 depends on BACKLIGHT_CLASS_DEVICE
591 Say Y here if you want to enable support for TPO TPG110
592 400CH LTPS TFT LCD Single Chip Digital Driver for up to
595 config DRM_PANEL_TRULY_NT35597_WQXGA
596 tristate "Truly WQXGA"
598 depends on DRM_MIPI_DSI
600 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
603 config DRM_PANEL_VISIONOX_RM69299
604 tristate "Visionox RM69299"
606 depends on DRM_MIPI_DSI
608 Say Y here if you want to enable support for Visionox
609 RM69299 DSI Video Mode panel.
611 config DRM_PANEL_WIDECHIPS_WS2401
612 tristate "Widechips WS2401 DPI panel driver"
613 depends on SPI && GPIOLIB
614 depends on BACKLIGHT_CLASS_DEVICE
617 Say Y here if you want to enable support for the Widechips WS2401 DPI
618 480x800 display controller used in panels such as Samsung LMS380KF01.
619 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
621 config DRM_PANEL_XINPENG_XPP055C272
622 tristate "Xinpeng XPP055C272 panel driver"
624 depends on DRM_MIPI_DSI
625 depends on BACKLIGHT_CLASS_DEVICE
627 Say Y here if you want to enable support for the Xinpeng
628 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI