drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/module.h>
  29 #include <linux/input.h>
  30 #include <linux/i2c.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/vgaarb.h>
  34 #include <drm/drm_edid.h>
  35 #include <drm/drmP.h>
  36 #include "intel_drv.h"
  37 #include <drm/i915_drm.h>
  38 #include "i915_drv.h"
  39 #include "i915_trace.h"
  40 #include <drm/drm_dp_helper.h>
  41 #include <drm/drm_crtc_helper.h>
  42 #include <linux/dma_remapping.h>
  43
  44 static void intel_increase_pllclock(struct drm_crtc *crtc);
  45 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
  46
  47 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
  48                                 struct intel_crtc_config *pipe_config);
  49 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
  50                                    struct intel_crtc_config *pipe_config);
  51
  52 static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
  53                           int x, int y, struct drm_framebuffer *old_fb);
  54
  55
  56 typedef struct {
  57         int     min, max;
  58 } intel_range_t;
  59
  60 typedef struct {
  61         int     dot_limit;
  62         int     p2_slow, p2_fast;
  63 } intel_p2_t;
  64
  65 typedef struct intel_limit intel_limit_t;
  66 struct intel_limit {
  67         intel_range_t   dot, vco, n, m, m1, m2, p, p1;
  68         intel_p2_t          p2;
  69 };
  70
  71 int
  72 intel_pch_rawclk(struct drm_device *dev)
  73 {
  74         struct drm_i915_private *dev_priv = dev->dev_private;
  75
  76         WARN_ON(!HAS_PCH_SPLIT(dev));
  77
  78         return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
  79 }
  80
  81 static inline u32 /* units of 100MHz */
  82 intel_fdi_link_freq(struct drm_device *dev)
  83 {
  84         if (IS_GEN5(dev)) {
  85                 struct drm_i915_private *dev_priv = dev->dev_private;
  86                 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
  87         } else
  88                 return 27;
  89 }
  90
  91 static const intel_limit_t intel_limits_i8xx_dac = {
  92         .dot = { .min = 25000, .max = 350000 },
  93         .vco = { .min = 930000, .max = 1400000 },
  94         .n = { .min = 3, .max = 16 },
  95         .m = { .min = 96, .max = 140 },
  96         .m1 = { .min = 18, .max = 26 },
  97         .m2 = { .min = 6, .max = 16 },
  98         .p = { .min = 4, .max = 128 },
  99         .p1 = { .min = 2, .max = 33 },
 100         .p2 = { .dot_limit = 165000,
 101                 .p2_slow = 4, .p2_fast = 2 },
 102 };
 103
 104 static const intel_limit_t intel_limits_i8xx_dvo = {
 105         .dot = { .min = 25000, .max = 350000 },
 106         .vco = { .min = 930000, .max = 1400000 },
 107         .n = { .min = 3, .max = 16 },
 108         .m = { .min = 96, .max = 140 },
 109         .m1 = { .min = 18, .max = 26 },
 110         .m2 = { .min = 6, .max = 16 },
 111         .p = { .min = 4, .max = 128 },
 112         .p1 = { .min = 2, .max = 33 },
 113         .p2 = { .dot_limit = 165000,
 114                 .p2_slow = 4, .p2_fast = 4 },
 115 };
 116
 117 static const intel_limit_t intel_limits_i8xx_lvds = {
 118         .dot = { .min = 25000, .max = 350000 },
 119         .vco = { .min = 930000, .max = 1400000 },
 120         .n = { .min = 3, .max = 16 },
 121         .m = { .min = 96, .max = 140 },
 122         .m1 = { .min = 18, .max = 26 },
 123         .m2 = { .min = 6, .max = 16 },
 124         .p = { .min = 4, .max = 128 },
 125         .p1 = { .min = 1, .max = 6 },
 126         .p2 = { .dot_limit = 165000,
 127                 .p2_slow = 14, .p2_fast = 7 },
 128 };
 129
 130 static const intel_limit_t intel_limits_i9xx_sdvo = {
 131         .dot = { .min = 20000, .max = 400000 },
 132         .vco = { .min = 1400000, .max = 2800000 },
 133         .n = { .min = 1, .max = 6 },
 134         .m = { .min = 70, .max = 120 },
 135         .m1 = { .min = 8, .max = 18 },
 136         .m2 = { .min = 3, .max = 7 },
 137         .p = { .min = 5, .max = 80 },
 138         .p1 = { .min = 1, .max = 8 },
 139         .p2 = { .dot_limit = 200000,
 140                 .p2_slow = 10, .p2_fast = 5 },
 141 };
 142
 143 static const intel_limit_t intel_limits_i9xx_lvds = {
 144         .dot = { .min = 20000, .max = 400000 },
 145         .vco = { .min = 1400000, .max = 2800000 },
 146         .n = { .min = 1, .max = 6 },
 147         .m = { .min = 70, .max = 120 },
 148         .m1 = { .min = 8, .max = 18 },
 149         .m2 = { .min = 3, .max = 7 },
 150         .p = { .min = 7, .max = 98 },
 151         .p1 = { .min = 1, .max = 8 },
 152         .p2 = { .dot_limit = 112000,
 153                 .p2_slow = 14, .p2_fast = 7 },
 154 };
 155
 156
 157 static const intel_limit_t intel_limits_g4x_sdvo = {
 158         .dot = { .min = 25000, .max = 270000 },
 159         .vco = { .min = 1750000, .max = 3500000},
 160         .n = { .min = 1, .max = 4 },
 161         .m = { .min = 104, .max = 138 },
 162         .m1 = { .min = 17, .max = 23 },
 163         .m2 = { .min = 5, .max = 11 },
 164         .p = { .min = 10, .max = 30 },
 165         .p1 = { .min = 1, .max = 3},
 166         .p2 = { .dot_limit = 270000,
 167                 .p2_slow = 10,
 168                 .p2_fast = 10
 169         },
 170 };
 171
 172 static const intel_limit_t intel_limits_g4x_hdmi = {
 173         .dot = { .min = 22000, .max = 400000 },
 174         .vco = { .min = 1750000, .max = 3500000},
 175         .n = { .min = 1, .max = 4 },
 176         .m = { .min = 104, .max = 138 },
 177         .m1 = { .min = 16, .max = 23 },
 178         .m2 = { .min = 5, .max = 11 },
 179         .p = { .min = 5, .max = 80 },
 180         .p1 = { .min = 1, .max = 8},
 181         .p2 = { .dot_limit = 165000,
 182                 .p2_slow = 10, .p2_fast = 5 },
 183 };
 184
 185 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 186         .dot = { .min = 20000, .max = 115000 },
 187         .vco = { .min = 1750000, .max = 3500000 },
 188         .n = { .min = 1, .max = 3 },
 189         .m = { .min = 104, .max = 138 },
 190         .m1 = { .min = 17, .max = 23 },
 191         .m2 = { .min = 5, .max = 11 },
 192         .p = { .min = 28, .max = 112 },
 193         .p1 = { .min = 2, .max = 8 },
 194         .p2 = { .dot_limit = 0,
 195                 .p2_slow = 14, .p2_fast = 14
 196         },
 197 };
 198
 199 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 200         .dot = { .min = 80000, .max = 224000 },
 201         .vco = { .min = 1750000, .max = 3500000 },
 202         .n = { .min = 1, .max = 3 },
 203         .m = { .min = 104, .max = 138 },
 204         .m1 = { .min = 17, .max = 23 },
 205         .m2 = { .min = 5, .max = 11 },
 206         .p = { .min = 14, .max = 42 },
 207         .p1 = { .min = 2, .max = 6 },
 208         .p2 = { .dot_limit = 0,
 209                 .p2_slow = 7, .p2_fast = 7
 210         },
 211 };
 212
 213 static const intel_limit_t intel_limits_pineview_sdvo = {
 214         .dot = { .min = 20000, .max = 400000},
 215         .vco = { .min = 1700000, .max = 3500000 },
 216         /* Pineview's Ncounter is a ring counter */
 217         .n = { .min = 3, .max = 6 },
 218         .m = { .min = 2, .max = 256 },
 219         /* Pineview only has one combined m divider, which we treat as m2. */
 220         .m1 = { .min = 0, .max = 0 },
 221         .m2 = { .min = 0, .max = 254 },
 222         .p = { .min = 5, .max = 80 },
 223         .p1 = { .min = 1, .max = 8 },
 224         .p2 = { .dot_limit = 200000,
 225                 .p2_slow = 10, .p2_fast = 5 },
 226 };
 227
 228 static const intel_limit_t intel_limits_pineview_lvds = {
 229         .dot = { .min = 20000, .max = 400000 },
 230         .vco = { .min = 1700000, .max = 3500000 },
 231         .n = { .min = 3, .max = 6 },
 232         .m = { .min = 2, .max = 256 },
 233         .m1 = { .min = 0, .max = 0 },
 234         .m2 = { .min = 0, .max = 254 },
 235         .p = { .min = 7, .max = 112 },
 236         .p1 = { .min = 1, .max = 8 },
 237         .p2 = { .dot_limit = 112000,
 238                 .p2_slow = 14, .p2_fast = 14 },
 239 };
 240
 241 /* Ironlake / Sandybridge
 242  *
 243  * We calculate clock using (register_value + 2) for N/M1/M2, so here
 244  * the range value for them is (actual_value - 2).
 245  */
 246 static const intel_limit_t intel_limits_ironlake_dac = {
 247         .dot = { .min = 25000, .max = 350000 },
 248         .vco = { .min = 1760000, .max = 3510000 },
 249         .n = { .min = 1, .max = 5 },
 250         .m = { .min = 79, .max = 127 },
 251         .m1 = { .min = 12, .max = 22 },
 252         .m2 = { .min = 5, .max = 9 },
 253         .p = { .min = 5, .max = 80 },
 254         .p1 = { .min = 1, .max = 8 },
 255         .p2 = { .dot_limit = 225000,
 256                 .p2_slow = 10, .p2_fast = 5 },
 257 };
 258
 259 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 260         .dot = { .min = 25000, .max = 350000 },
 261         .vco = { .min = 1760000, .max = 3510000 },
 262         .n = { .min = 1, .max = 3 },
 263         .m = { .min = 79, .max = 118 },
 264         .m1 = { .min = 12, .max = 22 },
 265         .m2 = { .min = 5, .max = 9 },
 266         .p = { .min = 28, .max = 112 },
 267         .p1 = { .min = 2, .max = 8 },
 268         .p2 = { .dot_limit = 225000,
 269                 .p2_slow = 14, .p2_fast = 14 },
 270 };
 271
 272 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 273         .dot = { .min = 25000, .max = 350000 },
 274         .vco = { .min = 1760000, .max = 3510000 },
 275         .n = { .min = 1, .max = 3 },
 276         .m = { .min = 79, .max = 127 },
 277         .m1 = { .min = 12, .max = 22 },
 278         .m2 = { .min = 5, .max = 9 },
 279         .p = { .min = 14, .max = 56 },
 280         .p1 = { .min = 2, .max = 8 },
 281         .p2 = { .dot_limit = 225000,
 282                 .p2_slow = 7, .p2_fast = 7 },
 283 };
 284
 285 /* LVDS 100mhz refclk limits. */
 286 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 287         .dot = { .min = 25000, .max = 350000 },
 288         .vco = { .min = 1760000, .max = 3510000 },
 289         .n = { .min = 1, .max = 2 },
 290         .m = { .min = 79, .max = 126 },
 291         .m1 = { .min = 12, .max = 22 },
 292         .m2 = { .min = 5, .max = 9 },
 293         .p = { .min = 28, .max = 112 },
 294         .p1 = { .min = 2, .max = 8 },
 295         .p2 = { .dot_limit = 225000,
 296                 .p2_slow = 14, .p2_fast = 14 },
 297 };
 298
 299 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 300         .dot = { .min = 25000, .max = 350000 },
 301         .vco = { .min = 1760000, .max = 3510000 },
 302         .n = { .min = 1, .max = 3 },
 303         .m = { .min = 79, .max = 126 },
 304         .m1 = { .min = 12, .max = 22 },
 305         .m2 = { .min = 5, .max = 9 },
 306         .p = { .min = 14, .max = 42 },
 307         .p1 = { .min = 2, .max = 6 },
 308         .p2 = { .dot_limit = 225000,
 309                 .p2_slow = 7, .p2_fast = 7 },
 310 };
 311
 312 static const intel_limit_t intel_limits_vlv = {
 313          /*
 314           * These are the data rate limits (measured in fast clocks)
 315           * since those are the strictest limits we have. The fast
 316           * clock and actual rate limits are more relaxed, so checking
 317           * them would make no difference.
 318           */
 319         .dot = { .min = 25000 * 5, .max = 270000 * 5 },
 320         .vco = { .min = 4000000, .max = 6000000 },
 321         .n = { .min = 1, .max = 7 },
 322         .m1 = { .min = 2, .max = 3 },
 323         .m2 = { .min = 11, .max = 156 },
 324         .p1 = { .min = 2, .max = 3 },
 325         .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
 326 };
 327
 328 static void vlv_clock(int refclk, intel_clock_t *clock)
 329 {
 330         clock->m = clock->m1 * clock->m2;
 331         clock->p = clock->p1 * clock->p2;
 332         if (WARN_ON(clock->n == 0 || clock->p == 0))
 333                 return;
 334         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
 335         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 336 }
 337
 338 /**
 339  * Returns whether any output on the specified pipe is of the specified type
 340  */
 341 static bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
 342 {
 343         struct drm_device *dev = crtc->dev;
 344         struct intel_encoder *encoder;
 345
 346         for_each_encoder_on_crtc(dev, crtc, encoder)
 347                 if (encoder->type == type)
 348                         return true;
 349
 350         return false;
 351 }
 352
 353 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 354                                                 int refclk)
 355 {
 356         struct drm_device *dev = crtc->dev;
 357         const intel_limit_t *limit;
 358
 359         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 360                 if (intel_is_dual_link_lvds(dev)) {
 361                         if (refclk == 100000)
 362                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 363                         else
 364                                 limit = &intel_limits_ironlake_dual_lvds;
 365                 } else {
 366                         if (refclk == 100000)
 367                                 limit = &intel_limits_ironlake_single_lvds_100m;
 368                         else
 369                                 limit = &intel_limits_ironlake_single_lvds;
 370                 }
 371         } else
 372                 limit = &intel_limits_ironlake_dac;
 373
 374         return limit;
 375 }
 376
 377 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 378 {
 379         struct drm_device *dev = crtc->dev;
 380         const intel_limit_t *limit;
 381
 382         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 383                 if (intel_is_dual_link_lvds(dev))
 384                         limit = &intel_limits_g4x_dual_channel_lvds;
 385                 else
 386                         limit = &intel_limits_g4x_single_channel_lvds;
 387         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 388                    intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
 389                 limit = &intel_limits_g4x_hdmi;
 390         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 391                 limit = &intel_limits_g4x_sdvo;
 392         } else /* The option is for other outputs */
 393                 limit = &intel_limits_i9xx_sdvo;
 394
 395         return limit;
 396 }
 397
 398 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 399 {
 400         struct drm_device *dev = crtc->dev;
 401         const intel_limit_t *limit;
 402
 403         if (HAS_PCH_SPLIT(dev))
 404                 limit = intel_ironlake_limit(crtc, refclk);
 405         else if (IS_G4X(dev)) {
 406                 limit = intel_g4x_limit(crtc);
 407         } else if (IS_PINEVIEW(dev)) {
 408                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 409                         limit = &intel_limits_pineview_lvds;
 410                 else
 411                         limit = &intel_limits_pineview_sdvo;
 412         } else if (IS_VALLEYVIEW(dev)) {
 413                 limit = &intel_limits_vlv;
 414         } else if (!IS_GEN2(dev)) {
 415                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 416                         limit = &intel_limits_i9xx_lvds;
 417                 else
 418                         limit = &intel_limits_i9xx_sdvo;
 419         } else {
 420                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 421                         limit = &intel_limits_i8xx_lvds;
 422                 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
 423                         limit = &intel_limits_i8xx_dvo;
 424                 else
 425                         limit = &intel_limits_i8xx_dac;
 426         }
 427         return limit;
 428 }
 429
 430 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 431 static void pineview_clock(int refclk, intel_clock_t *clock)
 432 {
 433         clock->m = clock->m2 + 2;
 434         clock->p = clock->p1 * clock->p2;
 435         if (WARN_ON(clock->n == 0 || clock->p == 0))
 436                 return;
 437         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
 438         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 439 }
 440
 441 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
 442 {
 443         return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
 444 }
 445
 446 static void i9xx_clock(int refclk, intel_clock_t *clock)
 447 {
 448         clock->m = i9xx_dpll_compute_m(clock);
 449         clock->p = clock->p1 * clock->p2;
 450         if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
 451                 return;
 452         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
 453         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 454 }
 455
 456 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 457 /**
 458  * Returns whether the given set of divisors are valid for a given refclk with
 459  * the given connectors.
 460  */
 461
 462 static bool intel_PLL_is_valid(struct drm_device *dev,
 463                                const intel_limit_t *limit,
 464                                const intel_clock_t *clock)
 465 {
 466         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 467                 INTELPllInvalid("n out of range\n");
 468         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 469                 INTELPllInvalid("p1 out of range\n");
 470         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 471                 INTELPllInvalid("m2 out of range\n");
 472         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 473                 INTELPllInvalid("m1 out of range\n");
 474
 475         if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
 476                 if (clock->m1 <= clock->m2)
 477                         INTELPllInvalid("m1 <= m2\n");
 478
 479         if (!IS_VALLEYVIEW(dev)) {
 480                 if (clock->p < limit->p.min || limit->p.max < clock->p)
 481                         INTELPllInvalid("p out of range\n");
 482                 if (clock->m < limit->m.min || limit->m.max < clock->m)
 483                         INTELPllInvalid("m out of range\n");
 484         }
 485
 486         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 487                 INTELPllInvalid("vco out of range\n");
 488         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 489          * connector, etc., rather than just a single range.
 490          */
 491         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 492                 INTELPllInvalid("dot out of range\n");
 493
 494         return true;
 495 }
 496
 497 static bool
 498 i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 499                     int target, int refclk, intel_clock_t *match_clock,
 500                     intel_clock_t *best_clock)
 501 {
 502         struct drm_device *dev = crtc->dev;
 503         intel_clock_t clock;
 504         int err = target;
 505
 506         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 507                 /*
 508                  * For LVDS just rely on its current settings for dual-channel.
 509                  * We haven't figured out how to reliably set up different
 510                  * single/dual channel state, if we even can.
 511                  */
 512                 if (intel_is_dual_link_lvds(dev))
 513                         clock.p2 = limit->p2.p2_fast;
 514                 else
 515                         clock.p2 = limit->p2.p2_slow;
 516         } else {
 517                 if (target < limit->p2.dot_limit)
 518                         clock.p2 = limit->p2.p2_slow;
 519                 else
 520                         clock.p2 = limit->p2.p2_fast;
 521         }
 522
 523         memset(best_clock, 0, sizeof(*best_clock));
 524
 525         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 526              clock.m1++) {
 527                 for (clock.m2 = limit->m2.min;
 528                      clock.m2 <= limit->m2.max; clock.m2++) {
 529                         if (clock.m2 >= clock.m1)
 530                                 break;
 531                         for (clock.n = limit->n.min;
 532                              clock.n <= limit->n.max; clock.n++) {
 533                                 for (clock.p1 = limit->p1.min;
 534                                         clock.p1 <= limit->p1.max; clock.p1++) {
 535                                         int this_err;
 536
 537                                         i9xx_clock(refclk, &clock);
 538                                         if (!intel_PLL_is_valid(dev, limit,
 539                                                                 &clock))
 540                                                 continue;
 541                                         if (match_clock &&
 542                                             clock.p != match_clock->p)
 543                                                 continue;
 544
 545                                         this_err = abs(clock.dot - target);
 546                                         if (this_err < err) {
 547                                                 *best_clock = clock;
 548                                                 err = this_err;
 549                                         }
 550                                 }
 551                         }
 552                 }
 553         }
 554
 555         return (err != target);
 556 }
 557
 558 static bool
 559 pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 560                    int target, int refclk, intel_clock_t *match_clock,
 561                    intel_clock_t *best_clock)
 562 {
 563         struct drm_device *dev = crtc->dev;
 564         intel_clock_t clock;
 565         int err = target;
 566
 567         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 568                 /*
 569                  * For LVDS just rely on its current settings for dual-channel.
 570                  * We haven't figured out how to reliably set up different
 571                  * single/dual channel state, if we even can.
 572                  */
 573                 if (intel_is_dual_link_lvds(dev))
 574                         clock.p2 = limit->p2.p2_fast;
 575                 else
 576                         clock.p2 = limit->p2.p2_slow;
 577         } else {
 578                 if (target < limit->p2.dot_limit)
 579                         clock.p2 = limit->p2.p2_slow;
 580                 else
 581                         clock.p2 = limit->p2.p2_fast;
 582         }
 583
 584         memset(best_clock, 0, sizeof(*best_clock));
 585
 586         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 587              clock.m1++) {
 588                 for (clock.m2 = limit->m2.min;
 589                      clock.m2 <= limit->m2.max; clock.m2++) {
 590                         for (clock.n = limit->n.min;
 591                              clock.n <= limit->n.max; clock.n++) {
 592                                 for (clock.p1 = limit->p1.min;
 593                                         clock.p1 <= limit->p1.max; clock.p1++) {
 594                                         int this_err;
 595
 596                                         pineview_clock(refclk, &clock);
 597                                         if (!intel_PLL_is_valid(dev, limit,
 598                                                                 &clock))
 599                                                 continue;
 600                                         if (match_clock &&
 601                                             clock.p != match_clock->p)
 602                                                 continue;
 603
 604                                         this_err = abs(clock.dot - target);
 605                                         if (this_err < err) {
 606                                                 *best_clock = clock;
 607                                                 err = this_err;
 608                                         }
 609                                 }
 610                         }
 611                 }
 612         }
 613
 614         return (err != target);
 615 }
 616
 617 static bool
 618 g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 619                    int target, int refclk, intel_clock_t *match_clock,
 620                    intel_clock_t *best_clock)
 621 {
 622         struct drm_device *dev = crtc->dev;
 623         intel_clock_t clock;
 624         int max_n;
 625         bool found;
 626         /* approximately equals target * 0.00585 */
 627         int err_most = (target >> 8) + (target >> 9);
 628         found = false;
 629
 630         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 631                 if (intel_is_dual_link_lvds(dev))
 632                         clock.p2 = limit->p2.p2_fast;
 633                 else
 634                         clock.p2 = limit->p2.p2_slow;
 635         } else {
 636                 if (target < limit->p2.dot_limit)
 637                         clock.p2 = limit->p2.p2_slow;
 638                 else
 639                         clock.p2 = limit->p2.p2_fast;
 640         }
 641
 642         memset(best_clock, 0, sizeof(*best_clock));
 643         max_n = limit->n.max;
 644         /* based on hardware requirement, prefer smaller n to precision */
 645         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 646                 /* based on hardware requirement, prefere larger m1,m2 */
 647                 for (clock.m1 = limit->m1.max;
 648                      clock.m1 >= limit->m1.min; clock.m1--) {
 649                         for (clock.m2 = limit->m2.max;
 650                              clock.m2 >= limit->m2.min; clock.m2--) {
 651                                 for (clock.p1 = limit->p1.max;
 652                                      clock.p1 >= limit->p1.min; clock.p1--) {
 653                                         int this_err;
 654
 655                                         i9xx_clock(refclk, &clock);
 656                                         if (!intel_PLL_is_valid(dev, limit,
 657                                                                 &clock))
 658                                                 continue;
 659
 660                                         this_err = abs(clock.dot - target);
 661                                         if (this_err < err_most) {
 662                                                 *best_clock = clock;
 663                                                 err_most = this_err;
 664                                                 max_n = clock.n;
 665                                                 found = true;
 666                                         }
 667                                 }
 668                         }
 669                 }
 670         }
 671         return found;
 672 }
 673
 674 static bool
 675 vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 676                    int target, int refclk, intel_clock_t *match_clock,
 677                    intel_clock_t *best_clock)
 678 {
 679         struct drm_device *dev = crtc->dev;
 680         intel_clock_t clock;
 681         unsigned int bestppm = 1000000;
 682         /* min update 19.2 MHz */
 683         int max_n = min(limit->n.max, refclk / 19200);
 684         bool found = false;
 685
 686         target *= 5; /* fast clock */
 687
 688         memset(best_clock, 0, sizeof(*best_clock));
 689
 690         /* based on hardware requirement, prefer smaller n to precision */
 691         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 692                 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
 693                         for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
 694                              clock.p2 -= clock.p2 > 10 ? 2 : 1) {
 695                                 clock.p = clock.p1 * clock.p2;
 696                                 /* based on hardware requirement, prefer bigger m1,m2 values */
 697                                 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
 698                                         unsigned int ppm, diff;
 699
 700                                         clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
 701                                                                      refclk * clock.m1);
 702
 703                                         vlv_clock(refclk, &clock);
 704
 705                                         if (!intel_PLL_is_valid(dev, limit,
 706                                                                 &clock))
 707                                                 continue;
 708
 709                                         diff = abs(clock.dot - target);
 710                                         ppm = div_u64(1000000ULL * diff, target);
 711
 712                                         if (ppm < 100 && clock.p > best_clock->p) {
 713                                                 bestppm = 0;
 714                                                 *best_clock = clock;
 715                                                 found = true;
 716                                         }
 717
 718                                         if (bestppm >= 10 && ppm < bestppm - 10) {
 719                                                 bestppm = ppm;
 720                                                 *best_clock = clock;
 721                                                 found = true;
 722                                         }
 723                                 }
 724                         }
 725                 }
 726         }
 727
 728         return found;
 729 }
 730
 731 bool intel_crtc_active(struct drm_crtc *crtc)
 732 {
 733         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 734
 735         /* Be paranoid as we can arrive here with only partial
 736          * state retrieved from the hardware during setup.
 737          *
 738          * We can ditch the adjusted_mode.crtc_clock check as soon
 739          * as Haswell has gained clock readout/fastboot support.
 740          *
 741          * We can ditch the crtc->fb check as soon as we can
 742          * properly reconstruct framebuffers.
 743          */
 744         return intel_crtc->active && crtc->fb &&
 745                 intel_crtc->config.adjusted_mode.crtc_clock;
 746 }
 747
 748 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 749                                              enum pipe pipe)
 750 {
 751         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 752         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 753
 754         return intel_crtc->config.cpu_transcoder;
 755 }
 756
 757 static void g4x_wait_for_vblank(struct drm_device *dev, int pipe)
 758 {
 759         struct drm_i915_private *dev_priv = dev->dev_private;
 760         u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe);
 761
 762         frame = I915_READ(frame_reg);
 763
 764         if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
 765                 DRM_DEBUG_KMS("vblank wait timed out\n");
 766 }
 767
 768 /**
 769  * intel_wait_for_vblank - wait for vblank on a given pipe
 770  * @dev: drm device
 771  * @pipe: pipe to wait for
 772  *
 773  * Wait for vblank to occur on a given pipe.  Needed for various bits of
 774  * mode setting code.
 775  */
 776 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 777 {
 778         struct drm_i915_private *dev_priv = dev->dev_private;
 779         int pipestat_reg = PIPESTAT(pipe);
 780
 781         if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
 782                 g4x_wait_for_vblank(dev, pipe);
 783                 return;
 784         }
 785
 786         /* Clear existing vblank status. Note this will clear any other
 787          * sticky status fields as well.
 788          *
 789          * This races with i915_driver_irq_handler() with the result
 790          * that either function could miss a vblank event.  Here it is not
 791          * fatal, as we will either wait upon the next vblank interrupt or
 792          * timeout.  Generally speaking intel_wait_for_vblank() is only
 793          * called during modeset at which time the GPU should be idle and
 794          * should *not* be performing page flips and thus not waiting on
 795          * vblanks...
 796          * Currently, the result of us stealing a vblank from the irq
 797          * handler is that a single frame will be skipped during swapbuffers.
 798          */
 799         I915_WRITE(pipestat_reg,
 800                    I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
 801
 802         /* Wait for vblank interrupt bit to set */
 803         if (wait_for(I915_READ(pipestat_reg) &
 804                      PIPE_VBLANK_INTERRUPT_STATUS,
 805                      50))
 806                 DRM_DEBUG_KMS("vblank wait timed out\n");
 807 }
 808
 809 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
 810 {
 811         struct drm_i915_private *dev_priv = dev->dev_private;
 812         u32 reg = PIPEDSL(pipe);
 813         u32 line1, line2;
 814         u32 line_mask;
 815
 816         if (IS_GEN2(dev))
 817                 line_mask = DSL_LINEMASK_GEN2;
 818         else
 819                 line_mask = DSL_LINEMASK_GEN3;
 820
 821         line1 = I915_READ(reg) & line_mask;
 822         mdelay(5);
 823         line2 = I915_READ(reg) & line_mask;
 824
 825         return line1 == line2;
 826 }
 827
 828 /*
 829  * intel_wait_for_pipe_off - wait for pipe to turn off
 830  * @dev: drm device
 831  * @pipe: pipe to wait for
 832  *
 833  * After disabling a pipe, we can't wait for vblank in the usual way,
 834  * spinning on the vblank interrupt status bit, since we won't actually
 835  * see an interrupt when the pipe is disabled.
 836  *
 837  * On Gen4 and above:
 838  *   wait for the pipe register state bit to turn off
 839  *
 840  * Otherwise:
 841  *   wait for the display line value to settle (it usually
 842  *   ends up stopping at the start of the next frame).
 843  *
 844  */
 845 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 846 {
 847         struct drm_i915_private *dev_priv = dev->dev_private;
 848         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 849                                                                       pipe);
 850
 851         if (INTEL_INFO(dev)->gen >= 4) {
 852                 int reg = PIPECONF(cpu_transcoder);
 853
 854                 /* Wait for the Pipe State to go off */
 855                 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
 856                              100))
 857                         WARN(1, "pipe_off wait timed out\n");
 858         } else {
 859                 /* Wait for the display line to settle */
 860                 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
 861                         WARN(1, "pipe_off wait timed out\n");
 862         }
 863 }
 864
 865 /*
 866  * ibx_digital_port_connected - is the specified port connected?
 867  * @dev_priv: i915 private structure
 868  * @port: the port to test
 869  *
 870  * Returns true if @port is connected, false otherwise.
 871  */
 872 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
 873                                 struct intel_digital_port *port)
 874 {
 875         u32 bit;
 876
 877         if (HAS_PCH_IBX(dev_priv->dev)) {
 878                 switch(port->port) {
 879                 case PORT_B:
 880                         bit = SDE_PORTB_HOTPLUG;
 881                         break;
 882                 case PORT_C:
 883                         bit = SDE_PORTC_HOTPLUG;
 884                         break;
 885                 case PORT_D:
 886                         bit = SDE_PORTD_HOTPLUG;
 887                         break;
 888                 default:
 889                         return true;
 890                 }
 891         } else {
 892                 switch(port->port) {
 893                 case PORT_B:
 894                         bit = SDE_PORTB_HOTPLUG_CPT;
 895                         break;
 896                 case PORT_C:
 897                         bit = SDE_PORTC_HOTPLUG_CPT;
 898                         break;
 899                 case PORT_D:
 900                         bit = SDE_PORTD_HOTPLUG_CPT;
 901                         break;
 902                 default:
 903                         return true;
 904                 }
 905         }
 906
 907         return I915_READ(SDEISR) & bit;
 908 }
 909
 910 static const char *state_string(bool enabled)
 911 {
 912         return enabled ? "on" : "off";
 913 }
 914
 915 /* Only for pre-ILK configs */
 916 void assert_pll(struct drm_i915_private *dev_priv,
 917                 enum pipe pipe, bool state)
 918 {
 919         int reg;
 920         u32 val;
 921         bool cur_state;
 922
 923         reg = DPLL(pipe);
 924         val = I915_READ(reg);
 925         cur_state = !!(val & DPLL_VCO_ENABLE);
 926         WARN(cur_state != state,
 927              "PLL state assertion failure (expected %s, current %s)\n",
 928              state_string(state), state_string(cur_state));
 929 }
 930
 931 /* XXX: the dsi pll is shared between MIPI DSI ports */
 932 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
 933 {
 934         u32 val;
 935         bool cur_state;
 936
 937         mutex_lock(&dev_priv->dpio_lock);
 938         val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
 939         mutex_unlock(&dev_priv->dpio_lock);
 940
 941         cur_state = val & DSI_PLL_VCO_EN;
 942         WARN(cur_state != state,
 943              "DSI PLL state assertion failure (expected %s, current %s)\n",
 944              state_string(state), state_string(cur_state));
 945 }
 946 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
 947 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
 948
 949 struct intel_shared_dpll *
 950 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
 951 {
 952         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
 953
 954         if (crtc->config.shared_dpll < 0)
 955                 return NULL;
 956
 957         return &dev_priv->shared_dplls[crtc->config.shared_dpll];
 958 }
 959
 960 /* For ILK+ */
 961 void assert_shared_dpll(struct drm_i915_private *dev_priv,
 962                         struct intel_shared_dpll *pll,
 963                         bool state)
 964 {
 965         bool cur_state;
 966         struct intel_dpll_hw_state hw_state;
 967
 968         if (HAS_PCH_LPT(dev_priv->dev)) {
 969                 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
 970                 return;
 971         }
 972
 973         if (WARN (!pll,
 974                   "asserting DPLL %s with no DPLL\n", state_string(state)))
 975                 return;
 976
 977         cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
 978         WARN(cur_state != state,
 979              "%s assertion failure (expected %s, current %s)\n",
 980              pll->name, state_string(state), state_string(cur_state));
 981 }
 982
 983 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 984                           enum pipe pipe, bool state)
 985 {
 986         int reg;
 987         u32 val;
 988         bool cur_state;
 989         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 990                                                                       pipe);
 991
 992         if (HAS_DDI(dev_priv->dev)) {
 993                 /* DDI does not have a specific FDI_TX register */
 994                 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
 995                 val = I915_READ(reg);
 996                 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
 997         } else {
 998                 reg = FDI_TX_CTL(pipe);
 999                 val = I915_READ(reg);
1000                 cur_state = !!(val & FDI_TX_ENABLE);
1001         }
1002         WARN(cur_state != state,
1003              "FDI TX state assertion failure (expected %s, current %s)\n",
1004              state_string(state), state_string(cur_state));
1005 }
1006 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1007 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1008
1009 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1010                           enum pipe pipe, bool state)
1011 {
1012         int reg;
1013         u32 val;
1014         bool cur_state;
1015
1016         reg = FDI_RX_CTL(pipe);
1017         val = I915_READ(reg);
1018         cur_state = !!(val & FDI_RX_ENABLE);
1019         WARN(cur_state != state,
1020              "FDI RX state assertion failure (expected %s, current %s)\n",
1021              state_string(state), state_string(cur_state));
1022 }
1023 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1024 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1025
1026 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1027                                       enum pipe pipe)
1028 {
1029         int reg;
1030         u32 val;
1031
1032         /* ILK FDI PLL is always enabled */
1033         if (dev_priv->info->gen == 5)
1034                 return;
1035
1036         /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1037         if (HAS_DDI(dev_priv->dev))
1038                 return;
1039
1040         reg = FDI_TX_CTL(pipe);
1041         val = I915_READ(reg);
1042         WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1043 }
1044
1045 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1046                        enum pipe pipe, bool state)
1047 {
1048         int reg;
1049         u32 val;
1050         bool cur_state;
1051
1052         reg = FDI_RX_CTL(pipe);
1053         val = I915_READ(reg);
1054         cur_state = !!(val & FDI_RX_PLL_ENABLE);
1055         WARN(cur_state != state,
1056              "FDI RX PLL assertion failure (expected %s, current %s)\n",
1057              state_string(state), state_string(cur_state));
1058 }
1059
1060 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1061                                   enum pipe pipe)
1062 {
1063         int pp_reg, lvds_reg;
1064         u32 val;
1065         enum pipe panel_pipe = PIPE_A;
1066         bool locked = true;
1067
1068         if (HAS_PCH_SPLIT(dev_priv->dev)) {
1069                 pp_reg = PCH_PP_CONTROL;
1070                 lvds_reg = PCH_LVDS;
1071         } else {
1072                 pp_reg = PP_CONTROL;
1073                 lvds_reg = LVDS;
1074         }
1075
1076         val = I915_READ(pp_reg);
1077         if (!(val & PANEL_POWER_ON) ||
1078             ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1079                 locked = false;
1080
1081         if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1082                 panel_pipe = PIPE_B;
1083
1084         WARN(panel_pipe == pipe && locked,
1085              "panel assertion failure, pipe %c regs locked\n",
1086              pipe_name(pipe));
1087 }
1088
1089 static void assert_cursor(struct drm_i915_private *dev_priv,
1090                           enum pipe pipe, bool state)
1091 {
1092         struct drm_device *dev = dev_priv->dev;
1093         bool cur_state;
1094
1095         if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
1096                 cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
1097         else if (IS_845G(dev) || IS_I865G(dev))
1098                 cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
1099         else
1100                 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1101
1102         WARN(cur_state != state,
1103              "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1104              pipe_name(pipe), state_string(state), state_string(cur_state));
1105 }
1106 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1107 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1108
1109 void assert_pipe(struct drm_i915_private *dev_priv,
1110                  enum pipe pipe, bool state)
1111 {
1112         int reg;
1113         u32 val;
1114         bool cur_state;
1115         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1116                                                                       pipe);
1117
1118         /* if we need the pipe A quirk it must be always on */
1119         if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1120                 state = true;
1121
1122         if (!intel_display_power_enabled(dev_priv->dev,
1123                                 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1124                 cur_state = false;
1125         } else {
1126                 reg = PIPECONF(cpu_transcoder);
1127                 val = I915_READ(reg);
1128                 cur_state = !!(val & PIPECONF_ENABLE);
1129         }
1130
1131         WARN(cur_state != state,
1132              "pipe %c assertion failure (expected %s, current %s)\n",
1133              pipe_name(pipe), state_string(state), state_string(cur_state));
1134 }
1135
1136 static void assert_plane(struct drm_i915_private *dev_priv,
1137                          enum plane plane, bool state)
1138 {
1139         int reg;
1140         u32 val;
1141         bool cur_state;
1142
1143         reg = DSPCNTR(plane);
1144         val = I915_READ(reg);
1145         cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1146         WARN(cur_state != state,
1147              "plane %c assertion failure (expected %s, current %s)\n",
1148              plane_name(plane), state_string(state), state_string(cur_state));
1149 }
1150
1151 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1152 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1153
1154 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1155                                    enum pipe pipe)
1156 {
1157         struct drm_device *dev = dev_priv->dev;
1158         int reg, i;
1159         u32 val;
1160         int cur_pipe;
1161
1162         /* Primary planes are fixed to pipes on gen4+ */
1163         if (INTEL_INFO(dev)->gen >= 4) {
1164                 reg = DSPCNTR(pipe);
1165                 val = I915_READ(reg);
1166                 WARN((val & DISPLAY_PLANE_ENABLE),
1167                      "plane %c assertion failure, should be disabled but not\n",
1168                      plane_name(pipe));
1169                 return;
1170         }
1171
1172         /* Need to check both planes against the pipe */
1173         for_each_pipe(i) {
1174                 reg = DSPCNTR(i);
1175                 val = I915_READ(reg);
1176                 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1177                         DISPPLANE_SEL_PIPE_SHIFT;
1178                 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1179                      "plane %c assertion failure, should be off on pipe %c but is still active\n",
1180                      plane_name(i), pipe_name(pipe));
1181         }
1182 }
1183
1184 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1185                                     enum pipe pipe)
1186 {
1187         struct drm_device *dev = dev_priv->dev;
1188         int reg, i;
1189         u32 val;
1190
1191         if (IS_VALLEYVIEW(dev)) {
1192                 for (i = 0; i < dev_priv->num_plane; i++) {
1193                         reg = SPCNTR(pipe, i);
1194                         val = I915_READ(reg);
1195                         WARN((val & SP_ENABLE),
1196                              "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1197                              sprite_name(pipe, i), pipe_name(pipe));
1198                 }
1199         } else if (INTEL_INFO(dev)->gen >= 7) {
1200                 reg = SPRCTL(pipe);
1201                 val = I915_READ(reg);
1202                 WARN((val & SPRITE_ENABLE),
1203                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1204                      plane_name(pipe), pipe_name(pipe));
1205         } else if (INTEL_INFO(dev)->gen >= 5) {
1206                 reg = DVSCNTR(pipe);
1207                 val = I915_READ(reg);
1208                 WARN((val & DVS_ENABLE),
1209                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1210                      plane_name(pipe), pipe_name(pipe));
1211         }
1212 }
1213
1214 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1215 {
1216         u32 val;
1217         bool enabled;
1218
1219         if (HAS_PCH_LPT(dev_priv->dev)) {
1220                 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1221                 return;
1222         }
1223
1224         val = I915_READ(PCH_DREF_CONTROL);
1225         enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1226                             DREF_SUPERSPREAD_SOURCE_MASK));
1227         WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1228 }
1229
1230 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1231                                            enum pipe pipe)
1232 {
1233         int reg;
1234         u32 val;
1235         bool enabled;
1236
1237         reg = PCH_TRANSCONF(pipe);
1238         val = I915_READ(reg);
1239         enabled = !!(val & TRANS_ENABLE);
1240         WARN(enabled,
1241              "transcoder assertion failed, should be off on pipe %c but is still active\n",
1242              pipe_name(pipe));
1243 }
1244
1245 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1246                             enum pipe pipe, u32 port_sel, u32 val)
1247 {
1248         if ((val & DP_PORT_EN) == 0)
1249                 return false;
1250
1251         if (HAS_PCH_CPT(dev_priv->dev)) {
1252                 u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1253                 u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1254                 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1255                         return false;
1256         } else {
1257                 if ((val & DP_PIPE_MASK) != (pipe << 30))
1258                         return false;
1259         }
1260         return true;
1261 }
1262
1263 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1264                               enum pipe pipe, u32 val)
1265 {
1266         if ((val & SDVO_ENABLE) == 0)
1267                 return false;
1268
1269         if (HAS_PCH_CPT(dev_priv->dev)) {
1270                 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1271                         return false;
1272         } else {
1273                 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1274                         return false;
1275         }
1276         return true;
1277 }
1278
1279 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1280                               enum pipe pipe, u32 val)
1281 {
1282         if ((val & LVDS_PORT_EN) == 0)
1283                 return false;
1284
1285         if (HAS_PCH_CPT(dev_priv->dev)) {
1286                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1287                         return false;
1288         } else {
1289                 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1290                         return false;
1291         }
1292         return true;
1293 }
1294
1295 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1296                               enum pipe pipe, u32 val)
1297 {
1298         if ((val & ADPA_DAC_ENABLE) == 0)
1299                 return false;
1300         if (HAS_PCH_CPT(dev_priv->dev)) {
1301                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1302                         return false;
1303         } else {
1304                 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1305                         return false;
1306         }
1307         return true;
1308 }
1309
1310 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1311                                    enum pipe pipe, int reg, u32 port_sel)
1312 {
1313         u32 val = I915_READ(reg);
1314         WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1315              "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1316              reg, pipe_name(pipe));
1317
1318         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1319              && (val & DP_PIPEB_SELECT),
1320              "IBX PCH dp port still using transcoder B\n");
1321 }
1322
1323 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1324                                      enum pipe pipe, int reg)
1325 {
1326         u32 val = I915_READ(reg);
1327         WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1328              "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1329              reg, pipe_name(pipe));
1330
1331         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1332              && (val & SDVO_PIPE_B_SELECT),
1333              "IBX PCH hdmi port still using transcoder B\n");
1334 }
1335
1336 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1337                                       enum pipe pipe)
1338 {
1339         int reg;
1340         u32 val;
1341
1342         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1343         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1344         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1345
1346         reg = PCH_ADPA;
1347         val = I915_READ(reg);
1348         WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1349              "PCH VGA enabled on transcoder %c, should be disabled\n",
1350              pipe_name(pipe));
1351
1352         reg = PCH_LVDS;
1353         val = I915_READ(reg);
1354         WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1355              "PCH LVDS enabled on transcoder %c, should be disabled\n",
1356              pipe_name(pipe));
1357
1358         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1359         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1360         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1361 }
1362
1363 static void intel_init_dpio(struct drm_device *dev)
1364 {
1365         struct drm_i915_private *dev_priv = dev->dev_private;
1366
1367         if (!IS_VALLEYVIEW(dev))
1368                 return;
1369
1370         /* Enable the CRI clock source so we can get at the display */
1371         I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
1372                    DPLL_INTEGRATED_CRI_CLK_VLV);
1373
1374         DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
1375         /*
1376          * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
1377          *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
1378          *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
1379          *   b. The other bits such as sfr settings / modesel may all be set
1380          *      to 0.
1381          *
1382          * This should only be done on init and resume from S3 with both
1383          * PLLs disabled, or we risk losing DPIO and PLL synchronization.
1384          */
1385         I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
1386 }
1387
1388 static void vlv_enable_pll(struct intel_crtc *crtc)
1389 {
1390         struct drm_device *dev = crtc->base.dev;
1391         struct drm_i915_private *dev_priv = dev->dev_private;
1392         int reg = DPLL(crtc->pipe);
1393         u32 dpll = crtc->config.dpll_hw_state.dpll;
1394
1395         assert_pipe_disabled(dev_priv, crtc->pipe);
1396
1397         /* No really, not for ILK+ */
1398         BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
1399
1400         /* PLL is protected by panel, make sure we can write it */
1401         if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1402                 assert_panel_unlocked(dev_priv, crtc->pipe);
1403
1404         I915_WRITE(reg, dpll);
1405         POSTING_READ(reg);
1406         udelay(150);
1407
1408         if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1409                 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1410
1411         I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
1412         POSTING_READ(DPLL_MD(crtc->pipe));
1413
1414         /* We do this three times for luck */
1415         I915_WRITE(reg, dpll);
1416         POSTING_READ(reg);
1417         udelay(150); /* wait for warmup */
1418         I915_WRITE(reg, dpll);
1419         POSTING_READ(reg);
1420         udelay(150); /* wait for warmup */
1421         I915_WRITE(reg, dpll);
1422         POSTING_READ(reg);
1423         udelay(150); /* wait for warmup */
1424 }
1425
1426 static void i9xx_enable_pll(struct intel_crtc *crtc)
1427 {
1428         struct drm_device *dev = crtc->base.dev;
1429         struct drm_i915_private *dev_priv = dev->dev_private;
1430         int reg = DPLL(crtc->pipe);
1431         u32 dpll = crtc->config.dpll_hw_state.dpll;
1432
1433         assert_pipe_disabled(dev_priv, crtc->pipe);
1434
1435         /* No really, not for ILK+ */
1436         BUG_ON(dev_priv->info->gen >= 5);
1437
1438         /* PLL is protected by panel, make sure we can write it */
1439         if (IS_MOBILE(dev) && !IS_I830(dev))
1440                 assert_panel_unlocked(dev_priv, crtc->pipe);
1441
1442         I915_WRITE(reg, dpll);
1443
1444         /* Wait for the clocks to stabilize. */
1445         POSTING_READ(reg);
1446         udelay(150);
1447
1448         if (INTEL_INFO(dev)->gen >= 4) {
1449                 I915_WRITE(DPLL_MD(crtc->pipe),
1450                            crtc->config.dpll_hw_state.dpll_md);
1451         } else {
1452                 /* The pixel multiplier can only be updated once the
1453                  * DPLL is enabled and the clocks are stable.
1454                  *
1455                  * So write it again.
1456                  */
1457                 I915_WRITE(reg, dpll);
1458         }
1459
1460         /* We do this three times for luck */
1461         I915_WRITE(reg, dpll);
1462         POSTING_READ(reg);
1463         udelay(150); /* wait for warmup */
1464         I915_WRITE(reg, dpll);
1465         POSTING_READ(reg);
1466         udelay(150); /* wait for warmup */
1467         I915_WRITE(reg, dpll);
1468         POSTING_READ(reg);
1469         udelay(150); /* wait for warmup */
1470 }
1471
1472 /**
1473  * i9xx_disable_pll - disable a PLL
1474  * @dev_priv: i915 private structure
1475  * @pipe: pipe PLL to disable
1476  *
1477  * Disable the PLL for @pipe, making sure the pipe is off first.
1478  *
1479  * Note!  This is for pre-ILK only.
1480  */
1481 static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1482 {
1483         /* Don't disable pipe A or pipe A PLLs if needed */
1484         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1485                 return;
1486
1487         /* Make sure the pipe isn't still relying on us */
1488         assert_pipe_disabled(dev_priv, pipe);
1489
1490         I915_WRITE(DPLL(pipe), 0);
1491         POSTING_READ(DPLL(pipe));
1492 }
1493
1494 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1495 {
1496         u32 val = 0;
1497
1498         /* Make sure the pipe isn't still relying on us */
1499         assert_pipe_disabled(dev_priv, pipe);
1500
1501         /* Leave integrated clock source enabled */
1502         if (pipe == PIPE_B)
1503                 val = DPLL_INTEGRATED_CRI_CLK_VLV;
1504         I915_WRITE(DPLL(pipe), val);
1505         POSTING_READ(DPLL(pipe));
1506 }
1507
1508 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1509                 struct intel_digital_port *dport)
1510 {
1511         u32 port_mask;
1512
1513         switch (dport->port) {
1514         case PORT_B:
1515                 port_mask = DPLL_PORTB_READY_MASK;
1516                 break;
1517         case PORT_C:
1518                 port_mask = DPLL_PORTC_READY_MASK;
1519                 break;
1520         default:
1521                 BUG();
1522         }
1523
1524         if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
1525                 WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
1526                      port_name(dport->port), I915_READ(DPLL(0)));
1527 }
1528
1529 /**
1530  * ironlake_enable_shared_dpll - enable PCH PLL
1531  * @dev_priv: i915 private structure
1532  * @pipe: pipe PLL to enable
1533  *
1534  * The PCH PLL needs to be enabled before the PCH transcoder, since it
1535  * drives the transcoder clock.
1536  */
1537 static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
1538 {
1539         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1540         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1541
1542         /* PCH PLLs only available on ILK, SNB and IVB */
1543         BUG_ON(dev_priv->info->gen < 5);
1544         if (WARN_ON(pll == NULL))
1545                 return;
1546
1547         if (WARN_ON(pll->refcount == 0))
1548                 return;
1549
1550         DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
1551                       pll->name, pll->active, pll->on,
1552                       crtc->base.base.id);
1553
1554         if (pll->active++) {
1555                 WARN_ON(!pll->on);
1556                 assert_shared_dpll_enabled(dev_priv, pll);
1557                 return;
1558         }
1559         WARN_ON(pll->on);
1560
1561         DRM_DEBUG_KMS("enabling %s\n", pll->name);
1562         pll->enable(dev_priv, pll);
1563         pll->on = true;
1564 }
1565
1566 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1567 {
1568         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1569         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1570
1571         /* PCH only available on ILK+ */
1572         BUG_ON(dev_priv->info->gen < 5);
1573         if (WARN_ON(pll == NULL))
1574                return;
1575
1576         if (WARN_ON(pll->refcount == 0))
1577                 return;
1578
1579         DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1580                       pll->name, pll->active, pll->on,
1581                       crtc->base.base.id);
1582
1583         if (WARN_ON(pll->active == 0)) {
1584                 assert_shared_dpll_disabled(dev_priv, pll);
1585                 return;
1586         }
1587
1588         assert_shared_dpll_enabled(dev_priv, pll);
1589         WARN_ON(!pll->on);
1590         if (--pll->active)
1591                 return;
1592
1593         DRM_DEBUG_KMS("disabling %s\n", pll->name);
1594         pll->disable(dev_priv, pll);
1595         pll->on = false;
1596 }
1597
1598 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1599                                            enum pipe pipe)
1600 {
1601         struct drm_device *dev = dev_priv->dev;
1602         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1603         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1604         uint32_t reg, val, pipeconf_val;
1605
1606         /* PCH only available on ILK+ */
1607         BUG_ON(dev_priv->info->gen < 5);
1608
1609         /* Make sure PCH DPLL is enabled */
1610         assert_shared_dpll_enabled(dev_priv,
1611                                    intel_crtc_to_shared_dpll(intel_crtc));
1612
1613         /* FDI must be feeding us bits for PCH ports */
1614         assert_fdi_tx_enabled(dev_priv, pipe);
1615         assert_fdi_rx_enabled(dev_priv, pipe);
1616
1617         if (HAS_PCH_CPT(dev)) {
1618                 /* Workaround: Set the timing override bit before enabling the
1619                  * pch transcoder. */
1620                 reg = TRANS_CHICKEN2(pipe);
1621                 val = I915_READ(reg);
1622                 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1623                 I915_WRITE(reg, val);
1624         }
1625
1626         reg = PCH_TRANSCONF(pipe);
1627         val = I915_READ(reg);
1628         pipeconf_val = I915_READ(PIPECONF(pipe));
1629
1630         if (HAS_PCH_IBX(dev_priv->dev)) {
1631                 /*
1632                  * make the BPC in transcoder be consistent with
1633                  * that in pipeconf reg.
1634                  */
1635                 val &= ~PIPECONF_BPC_MASK;
1636                 val |= pipeconf_val & PIPECONF_BPC_MASK;
1637         }
1638
1639         val &= ~TRANS_INTERLACE_MASK;
1640         if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1641                 if (HAS_PCH_IBX(dev_priv->dev) &&
1642                     intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1643                         val |= TRANS_LEGACY_INTERLACED_ILK;
1644                 else
1645                         val |= TRANS_INTERLACED;
1646         else
1647                 val |= TRANS_PROGRESSIVE;
1648
1649         I915_WRITE(reg, val | TRANS_ENABLE);
1650         if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1651                 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1652 }
1653
1654 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1655                                       enum transcoder cpu_transcoder)
1656 {
1657         u32 val, pipeconf_val;
1658
1659         /* PCH only available on ILK+ */
1660         BUG_ON(dev_priv->info->gen < 5);
1661
1662         /* FDI must be feeding us bits for PCH ports */
1663         assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1664         assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1665
1666         /* Workaround: set timing override bit. */
1667         val = I915_READ(_TRANSA_CHICKEN2);
1668         val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1669         I915_WRITE(_TRANSA_CHICKEN2, val);
1670
1671         val = TRANS_ENABLE;
1672         pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1673
1674         if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1675             PIPECONF_INTERLACED_ILK)
1676                 val |= TRANS_INTERLACED;
1677         else
1678                 val |= TRANS_PROGRESSIVE;
1679
1680         I915_WRITE(LPT_TRANSCONF, val);
1681         if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1682                 DRM_ERROR("Failed to enable PCH transcoder\n");
1683 }
1684
1685 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1686                                             enum pipe pipe)
1687 {
1688         struct drm_device *dev = dev_priv->dev;
1689         uint32_t reg, val;
1690
1691         /* FDI relies on the transcoder */
1692         assert_fdi_tx_disabled(dev_priv, pipe);
1693         assert_fdi_rx_disabled(dev_priv, pipe);
1694
1695         /* Ports must be off as well */
1696         assert_pch_ports_disabled(dev_priv, pipe);
1697
1698         reg = PCH_TRANSCONF(pipe);
1699         val = I915_READ(reg);
1700         val &= ~TRANS_ENABLE;
1701         I915_WRITE(reg, val);
1702         /* wait for PCH transcoder off, transcoder state */
1703         if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1704                 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1705
1706         if (!HAS_PCH_IBX(dev)) {
1707                 /* Workaround: Clear the timing override chicken bit again. */
1708                 reg = TRANS_CHICKEN2(pipe);
1709                 val = I915_READ(reg);
1710                 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1711                 I915_WRITE(reg, val);
1712         }
1713 }
1714
1715 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1716 {
1717         u32 val;
1718
1719         val = I915_READ(LPT_TRANSCONF);
1720         val &= ~TRANS_ENABLE;
1721         I915_WRITE(LPT_TRANSCONF, val);
1722         /* wait for PCH transcoder off, transcoder state */
1723         if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1724                 DRM_ERROR("Failed to disable PCH transcoder\n");
1725
1726         /* Workaround: clear timing override bit. */
1727         val = I915_READ(_TRANSA_CHICKEN2);
1728         val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1729         I915_WRITE(_TRANSA_CHICKEN2, val);
1730 }
1731
1732 /**
1733  * intel_enable_pipe - enable a pipe, asserting requirements
1734  * @dev_priv: i915 private structure
1735  * @pipe: pipe to enable
1736  * @pch_port: on ILK+, is this pipe driving a PCH port or not
1737  *
1738  * Enable @pipe, making sure that various hardware specific requirements
1739  * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1740  *
1741  * @pipe should be %PIPE_A or %PIPE_B.
1742  *
1743  * Will wait until the pipe is actually running (i.e. first vblank) before
1744  * returning.
1745  */
1746 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1747                               bool pch_port, bool dsi)
1748 {
1749         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1750                                                                       pipe);
1751         enum pipe pch_transcoder;
1752         int reg;
1753         u32 val;
1754
1755         assert_planes_disabled(dev_priv, pipe);
1756         assert_cursor_disabled(dev_priv, pipe);
1757         assert_sprites_disabled(dev_priv, pipe);
1758
1759         if (HAS_PCH_LPT(dev_priv->dev))
1760                 pch_transcoder = TRANSCODER_A;
1761         else
1762                 pch_transcoder = pipe;
1763
1764         /*
1765          * A pipe without a PLL won't actually be able to drive bits from
1766          * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
1767          * need the check.
1768          */
1769         if (!HAS_PCH_SPLIT(dev_priv->dev))
1770                 if (dsi)
1771                         assert_dsi_pll_enabled(dev_priv);
1772                 else
1773                         assert_pll_enabled(dev_priv, pipe);
1774         else {
1775                 if (pch_port) {
1776                         /* if driving the PCH, we need FDI enabled */
1777                         assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1778                         assert_fdi_tx_pll_enabled(dev_priv,
1779                                                   (enum pipe) cpu_transcoder);
1780                 }
1781                 /* FIXME: assert CPU port conditions for SNB+ */
1782         }
1783
1784         reg = PIPECONF(cpu_transcoder);
1785         val = I915_READ(reg);
1786         if (val & PIPECONF_ENABLE)
1787                 return;
1788
1789         I915_WRITE(reg, val | PIPECONF_ENABLE);
1790         intel_wait_for_vblank(dev_priv->dev, pipe);
1791 }
1792
1793 /**
1794  * intel_disable_pipe - disable a pipe, asserting requirements
1795  * @dev_priv: i915 private structure
1796  * @pipe: pipe to disable
1797  *
1798  * Disable @pipe, making sure that various hardware specific requirements
1799  * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1800  *
1801  * @pipe should be %PIPE_A or %PIPE_B.
1802  *
1803  * Will wait until the pipe has shut down before returning.
1804  */
1805 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1806                                enum pipe pipe)
1807 {
1808         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1809                                                                       pipe);
1810         int reg;
1811         u32 val;
1812
1813         /*
1814          * Make sure planes won't keep trying to pump pixels to us,
1815          * or we might hang the display.
1816          */
1817         assert_planes_disabled(dev_priv, pipe);
1818         assert_cursor_disabled(dev_priv, pipe);
1819         assert_sprites_disabled(dev_priv, pipe);
1820
1821         /* Don't disable pipe A or pipe A PLLs if needed */
1822         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1823                 return;
1824
1825         reg = PIPECONF(cpu_transcoder);
1826         val = I915_READ(reg);
1827         if ((val & PIPECONF_ENABLE) == 0)
1828                 return;
1829
1830         I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1831         intel_wait_for_pipe_off(dev_priv->dev, pipe);
1832 }
1833
1834 /*
1835  * Plane regs are double buffered, going from enabled->disabled needs a
1836  * trigger in order to latch.  The display address reg provides this.
1837  */
1838 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
1839                                enum plane plane)
1840 {
1841         u32 reg = dev_priv->info->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
1842
1843         I915_WRITE(reg, I915_READ(reg));
1844         POSTING_READ(reg);
1845 }
1846
1847 /**
1848  * intel_enable_primary_plane - enable the primary plane on a given pipe
1849  * @dev_priv: i915 private structure
1850  * @plane: plane to enable
1851  * @pipe: pipe being fed
1852  *
1853  * Enable @plane on @pipe, making sure that @pipe is running first.
1854  */
1855 static void intel_enable_primary_plane(struct drm_i915_private *dev_priv,
1856                                        enum plane plane, enum pipe pipe)
1857 {
1858         struct intel_crtc *intel_crtc =
1859                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1860         int reg;
1861         u32 val;
1862
1863         /* If the pipe isn't enabled, we can't pump pixels and may hang */
1864         assert_pipe_enabled(dev_priv, pipe);
1865
1866         WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n");
1867
1868         intel_crtc->primary_enabled = true;
1869
1870         reg = DSPCNTR(plane);
1871         val = I915_READ(reg);
1872         if (val & DISPLAY_PLANE_ENABLE)
1873                 return;
1874
1875         I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1876         intel_flush_primary_plane(dev_priv, plane);
1877         intel_wait_for_vblank(dev_priv->dev, pipe);
1878 }
1879
1880 /**
1881  * intel_disable_primary_plane - disable the primary plane
1882  * @dev_priv: i915 private structure
1883  * @plane: plane to disable
1884  * @pipe: pipe consuming the data
1885  *
1886  * Disable @plane; should be an independent operation.
1887  */
1888 static void intel_disable_primary_plane(struct drm_i915_private *dev_priv,
1889                                         enum plane plane, enum pipe pipe)
1890 {
1891         struct intel_crtc *intel_crtc =
1892                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1893         int reg;
1894         u32 val;
1895
1896         WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n");
1897
1898         intel_crtc->primary_enabled = false;
1899
1900         reg = DSPCNTR(plane);
1901         val = I915_READ(reg);
1902         if ((val & DISPLAY_PLANE_ENABLE) == 0)
1903                 return;
1904
1905         I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1906         intel_flush_primary_plane(dev_priv, plane);
1907         intel_wait_for_vblank(dev_priv->dev, pipe);
1908 }
1909
1910 static bool need_vtd_wa(struct drm_device *dev)
1911 {
1912 #ifdef CONFIG_INTEL_IOMMU
1913         if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1914                 return true;
1915 #endif
1916         return false;
1917 }
1918
1919 int
1920 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1921                            struct drm_i915_gem_object *obj,
1922                            struct intel_ring_buffer *pipelined)
1923 {
1924         struct drm_i915_private *dev_priv = dev->dev_private;
1925         u32 alignment;
1926         int ret;
1927
1928         switch (obj->tiling_mode) {
1929         case I915_TILING_NONE:
1930                 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1931                         alignment = 128 * 1024;
1932                 else if (INTEL_INFO(dev)->gen >= 4)
1933                         alignment = 4 * 1024;
1934                 else
1935                         alignment = 64 * 1024;
1936                 break;
1937         case I915_TILING_X:
1938                 /* pin() will align the object as required by fence */
1939                 alignment = 0;
1940                 break;
1941         case I915_TILING_Y:
1942                 WARN(1, "Y tiled bo slipped through, driver bug!\n");
1943                 return -EINVAL;
1944         default:
1945                 BUG();
1946         }
1947
1948         /* Note that the w/a also requires 64 PTE of padding following the
1949          * bo. We currently fill all unused PTE with the shadow page and so
1950          * we should always have valid PTE following the scanout preventing
1951          * the VT-d warning.
1952          */
1953         if (need_vtd_wa(dev) && alignment < 256 * 1024)
1954                 alignment = 256 * 1024;
1955
1956         dev_priv->mm.interruptible = false;
1957         ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1958         if (ret)
1959                 goto err_interruptible;
1960
1961         /* Install a fence for tiled scan-out. Pre-i965 always needs a
1962          * fence, whereas 965+ only requires a fence if using
1963          * framebuffer compression.  For simplicity, we always install
1964          * a fence as the cost is not that onerous.
1965          */
1966         ret = i915_gem_object_get_fence(obj);
1967         if (ret)
1968                 goto err_unpin;
1969
1970         i915_gem_object_pin_fence(obj);
1971
1972         dev_priv->mm.interruptible = true;
1973         return 0;
1974
1975 err_unpin:
1976         i915_gem_object_unpin_from_display_plane(obj);
1977 err_interruptible:
1978         dev_priv->mm.interruptible = true;
1979         return ret;
1980 }
1981
1982 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1983 {
1984         i915_gem_object_unpin_fence(obj);
1985         i915_gem_object_unpin_from_display_plane(obj);
1986 }
1987
1988 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
1989  * is assumed to be a power-of-two. */
1990 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
1991                                              unsigned int tiling_mode,
1992                                              unsigned int cpp,
1993                                              unsigned int pitch)
1994 {
1995         if (tiling_mode != I915_TILING_NONE) {
1996                 unsigned int tile_rows, tiles;
1997
1998                 tile_rows = *y / 8;
1999                 *y %= 8;
2000
2001                 tiles = *x / (512/cpp);
2002                 *x %= 512/cpp;
2003
2004                 return tile_rows * pitch * 8 + tiles * 4096;
2005         } else {
2006                 unsigned int offset;
2007
2008                 offset = *y * pitch + *x * cpp;
2009                 *y = 0;
2010                 *x = (offset & 4095) / cpp;
2011                 return offset & -4096;
2012         }
2013 }
2014
2015 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2016                              int x, int y)
2017 {
2018         struct drm_device *dev = crtc->dev;
2019         struct drm_i915_private *dev_priv = dev->dev_private;
2020         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2021         struct intel_framebuffer *intel_fb;
2022         struct drm_i915_gem_object *obj;
2023         int plane = intel_crtc->plane;
2024         unsigned long linear_offset;
2025         u32 dspcntr;
2026         u32 reg;
2027
2028         switch (plane) {
2029         case 0:
2030         case 1:
2031                 break;
2032         default:
2033                 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2034                 return -EINVAL;
2035         }
2036
2037         intel_fb = to_intel_framebuffer(fb);
2038         obj = intel_fb->obj;
2039
2040         reg = DSPCNTR(plane);
2041         dspcntr = I915_READ(reg);
2042         /* Mask out pixel format bits in case we change it */
2043         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2044         switch (fb->pixel_format) {
2045         case DRM_FORMAT_C8:
2046                 dspcntr |= DISPPLANE_8BPP;
2047                 break;
2048         case DRM_FORMAT_XRGB1555:
2049         case DRM_FORMAT_ARGB1555:
2050                 dspcntr |= DISPPLANE_BGRX555;
2051                 break;
2052         case DRM_FORMAT_RGB565:
2053                 dspcntr |= DISPPLANE_BGRX565;
2054                 break;
2055         case DRM_FORMAT_XRGB8888:
2056         case DRM_FORMAT_ARGB8888:
2057                 dspcntr |= DISPPLANE_BGRX888;
2058                 break;
2059         case DRM_FORMAT_XBGR8888:
2060         case DRM_FORMAT_ABGR8888:
2061                 dspcntr |= DISPPLANE_RGBX888;
2062                 break;
2063         case DRM_FORMAT_XRGB2101010:
2064         case DRM_FORMAT_ARGB2101010:
2065                 dspcntr |= DISPPLANE_BGRX101010;
2066                 break;
2067         case DRM_FORMAT_XBGR2101010:
2068         case DRM_FORMAT_ABGR2101010:
2069                 dspcntr |= DISPPLANE_RGBX101010;
2070                 break;
2071         default:
2072                 BUG();
2073         }
2074
2075         if (INTEL_INFO(dev)->gen >= 4) {
2076                 if (obj->tiling_mode != I915_TILING_NONE)
2077                         dspcntr |= DISPPLANE_TILED;
2078                 else
2079                         dspcntr &= ~DISPPLANE_TILED;
2080         }
2081
2082         if (IS_G4X(dev))
2083                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2084
2085         I915_WRITE(reg, dspcntr);
2086
2087         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2088
2089         if (INTEL_INFO(dev)->gen >= 4) {
2090                 intel_crtc->dspaddr_offset =
2091                         intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2092                                                        fb->bits_per_pixel / 8,
2093                                                        fb->pitches[0]);
2094                 linear_offset -= intel_crtc->dspaddr_offset;
2095         } else {
2096                 intel_crtc->dspaddr_offset = linear_offset;
2097         }
2098
2099         DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2100                       i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2101                       fb->pitches[0]);
2102         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2103         if (INTEL_INFO(dev)->gen >= 4) {
2104                 I915_MODIFY_DISPBASE(DSPSURF(plane),
2105                                      i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2106                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2107                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2108         } else
2109                 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2110         POSTING_READ(reg);
2111
2112         return 0;
2113 }
2114
2115 static int ironlake_update_plane(struct drm_crtc *crtc,
2116                                  struct drm_framebuffer *fb, int x, int y)
2117 {
2118         struct drm_device *dev = crtc->dev;
2119         struct drm_i915_private *dev_priv = dev->dev_private;
2120         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2121         struct intel_framebuffer *intel_fb;
2122         struct drm_i915_gem_object *obj;
2123         int plane = intel_crtc->plane;
2124         unsigned long linear_offset;
2125         u32 dspcntr;
2126         u32 reg;
2127
2128         switch (plane) {
2129         case 0:
2130         case 1:
2131         case 2:
2132                 break;
2133         default:
2134                 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2135                 return -EINVAL;
2136         }
2137
2138         intel_fb = to_intel_framebuffer(fb);
2139         obj = intel_fb->obj;
2140
2141         reg = DSPCNTR(plane);
2142         dspcntr = I915_READ(reg);
2143         /* Mask out pixel format bits in case we change it */
2144         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2145         switch (fb->pixel_format) {
2146         case DRM_FORMAT_C8:
2147                 dspcntr |= DISPPLANE_8BPP;
2148                 break;
2149         case DRM_FORMAT_RGB565:
2150                 dspcntr |= DISPPLANE_BGRX565;
2151                 break;
2152         case DRM_FORMAT_XRGB8888:
2153         case DRM_FORMAT_ARGB8888:
2154                 dspcntr |= DISPPLANE_BGRX888;
2155                 break;
2156         case DRM_FORMAT_XBGR8888:
2157         case DRM_FORMAT_ABGR8888:
2158                 dspcntr |= DISPPLANE_RGBX888;
2159                 break;
2160         case DRM_FORMAT_XRGB2101010:
2161         case DRM_FORMAT_ARGB2101010:
2162                 dspcntr |= DISPPLANE_BGRX101010;
2163                 break;
2164         case DRM_FORMAT_XBGR2101010:
2165         case DRM_FORMAT_ABGR2101010:
2166                 dspcntr |= DISPPLANE_RGBX101010;
2167                 break;
2168         default:
2169                 BUG();
2170         }
2171
2172         if (obj->tiling_mode != I915_TILING_NONE)
2173                 dspcntr |= DISPPLANE_TILED;
2174         else
2175                 dspcntr &= ~DISPPLANE_TILED;
2176
2177         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2178                 dspcntr &= ~DISPPLANE_TRICKLE_FEED_DISABLE;
2179         else
2180                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2181
2182         I915_WRITE(reg, dspcntr);
2183
2184         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2185         intel_crtc->dspaddr_offset =
2186                 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2187                                                fb->bits_per_pixel / 8,
2188                                                fb->pitches[0]);
2189         linear_offset -= intel_crtc->dspaddr_offset;
2190
2191         DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2192                       i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2193                       fb->pitches[0]);
2194         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2195         I915_MODIFY_DISPBASE(DSPSURF(plane),
2196                              i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2197         if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2198                 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2199         } else {
2200                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2201                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2202         }
2203         POSTING_READ(reg);
2204
2205         return 0;
2206 }
2207
2208 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2209 static int
2210 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2211                            int x, int y, enum mode_set_atomic state)
2212 {
2213         struct drm_device *dev = crtc->dev;
2214         struct drm_i915_private *dev_priv = dev->dev_private;
2215
2216         if (dev_priv->display.disable_fbc)
2217                 dev_priv->display.disable_fbc(dev);
2218         intel_increase_pllclock(crtc);
2219
2220         return dev_priv->display.update_plane(crtc, fb, x, y);
2221 }
2222
2223 void intel_display_handle_reset(struct drm_device *dev)
2224 {
2225         struct drm_i915_private *dev_priv = dev->dev_private;
2226         struct drm_crtc *crtc;
2227
2228         /*
2229          * Flips in the rings have been nuked by the reset,
2230          * so complete all pending flips so that user space
2231          * will get its events and not get stuck.
2232          *
2233          * Also update the base address of all primary
2234          * planes to the the last fb to make sure we're
2235          * showing the correct fb after a reset.
2236          *
2237          * Need to make two loops over the crtcs so that we
2238          * don't try to grab a crtc mutex before the
2239          * pending_flip_queue really got woken up.
2240          */
2241
2242         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2243                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2244                 enum plane plane = intel_crtc->plane;
2245
2246                 intel_prepare_page_flip(dev, plane);
2247                 intel_finish_page_flip_plane(dev, plane);
2248         }
2249
2250         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2251                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2252
2253                 mutex_lock(&crtc->mutex);
2254                 /*
2255                  * FIXME: Once we have proper support for primary planes (and
2256                  * disabling them without disabling the entire crtc) allow again
2257                  * a NULL crtc->fb.
2258                  */
2259                 if (intel_crtc->active && crtc->fb)
2260                         dev_priv->display.update_plane(crtc, crtc->fb,
2261                                                        crtc->x, crtc->y);
2262                 mutex_unlock(&crtc->mutex);
2263         }
2264 }
2265
2266 static int
2267 intel_finish_fb(struct drm_framebuffer *old_fb)
2268 {
2269         struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2270         struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2271         bool was_interruptible = dev_priv->mm.interruptible;
2272         int ret;
2273
2274         /* Big Hammer, we also need to ensure that any pending
2275          * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2276          * current scanout is retired before unpinning the old
2277          * framebuffer.
2278          *
2279          * This should only fail upon a hung GPU, in which case we
2280          * can safely continue.
2281          */
2282         dev_priv->mm.interruptible = false;
2283         ret = i915_gem_object_finish_gpu(obj);
2284         dev_priv->mm.interruptible = was_interruptible;
2285
2286         return ret;
2287 }
2288
2289 static void intel_crtc_update_sarea_pos(struct drm_crtc *crtc, int x, int y)
2290 {
2291         struct drm_device *dev = crtc->dev;
2292         struct drm_i915_master_private *master_priv;
2293         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2294
2295         if (!dev->primary->master)
2296                 return;
2297
2298         master_priv = dev->primary->master->driver_priv;
2299         if (!master_priv->sarea_priv)
2300                 return;
2301
2302         switch (intel_crtc->pipe) {
2303         case 0:
2304                 master_priv->sarea_priv->pipeA_x = x;
2305                 master_priv->sarea_priv->pipeA_y = y;
2306                 break;
2307         case 1:
2308                 master_priv->sarea_priv->pipeB_x = x;
2309                 master_priv->sarea_priv->pipeB_y = y;
2310                 break;
2311         default:
2312                 break;
2313         }
2314 }
2315
2316 static int
2317 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2318                     struct drm_framebuffer *fb)
2319 {
2320         struct drm_device *dev = crtc->dev;
2321         struct drm_i915_private *dev_priv = dev->dev_private;
2322         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2323         struct drm_framebuffer *old_fb;
2324         int ret;
2325
2326         /* no fb bound */
2327         if (!fb) {
2328                 DRM_ERROR("No FB bound\n");
2329                 return 0;
2330         }
2331
2332         if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2333                 DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
2334                           plane_name(intel_crtc->plane),
2335                           INTEL_INFO(dev)->num_pipes);
2336                 return -EINVAL;
2337         }
2338
2339         mutex_lock(&dev->struct_mutex);
2340         ret = intel_pin_and_fence_fb_obj(dev,
2341                                          to_intel_framebuffer(fb)->obj,
2342                                          NULL);
2343         if (ret != 0) {
2344                 mutex_unlock(&dev->struct_mutex);
2345                 DRM_ERROR("pin & fence failed\n");
2346                 return ret;
2347         }
2348
2349         /*
2350          * Update pipe size and adjust fitter if needed: the reason for this is
2351          * that in compute_mode_changes we check the native mode (not the pfit
2352          * mode) to see if we can flip rather than do a full mode set. In the
2353          * fastboot case, we'll flip, but if we don't update the pipesrc and
2354          * pfit state, we'll end up with a big fb scanned out into the wrong
2355          * sized surface.
2356          *
2357          * To fix this properly, we need to hoist the checks up into
2358          * compute_mode_changes (or above), check the actual pfit state and
2359          * whether the platform allows pfit disable with pipe active, and only
2360          * then update the pipesrc and pfit state, even on the flip path.
2361          */
2362         if (i915_fastboot) {
2363                 const struct drm_display_mode *adjusted_mode =
2364                         &intel_crtc->config.adjusted_mode;
2365
2366                 I915_WRITE(PIPESRC(intel_crtc->pipe),
2367                            ((adjusted_mode->crtc_hdisplay - 1) << 16) |
2368                            (adjusted_mode->crtc_vdisplay - 1));
2369                 if (!intel_crtc->config.pch_pfit.enabled &&
2370                     (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
2371                      intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2372                         I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
2373                         I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0);
2374                         I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0);
2375                 }
2376         }
2377
2378         ret = dev_priv->display.update_plane(crtc, fb, x, y);
2379         if (ret) {
2380                 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2381                 mutex_unlock(&dev->struct_mutex);
2382                 DRM_ERROR("failed to update base address\n");
2383                 return ret;
2384         }
2385
2386         old_fb = crtc->fb;
2387         crtc->fb = fb;
2388         crtc->x = x;
2389         crtc->y = y;
2390
2391         if (old_fb) {
2392                 if (intel_crtc->active && old_fb != fb)
2393                         intel_wait_for_vblank(dev, intel_crtc->pipe);
2394                 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2395         }
2396
2397         intel_update_fbc(dev);
2398         intel_edp_psr_update(dev);
2399         mutex_unlock(&dev->struct_mutex);
2400
2401         intel_crtc_update_sarea_pos(crtc, x, y);
2402
2403         return 0;
2404 }
2405
2406 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2407 {
2408         struct drm_device *dev = crtc->dev;
2409         struct drm_i915_private *dev_priv = dev->dev_private;
2410         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2411         int pipe = intel_crtc->pipe;
2412         u32 reg, temp;
2413
2414         /* enable normal train */
2415         reg = FDI_TX_CTL(pipe);
2416         temp = I915_READ(reg);
2417         if (IS_IVYBRIDGE(dev)) {
2418                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2419                 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2420         } else {
2421                 temp &= ~FDI_LINK_TRAIN_NONE;
2422                 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2423         }
2424         I915_WRITE(reg, temp);
2425
2426         reg = FDI_RX_CTL(pipe);
2427         temp = I915_READ(reg);
2428         if (HAS_PCH_CPT(dev)) {
2429                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2430                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2431         } else {
2432                 temp &= ~FDI_LINK_TRAIN_NONE;
2433                 temp |= FDI_LINK_TRAIN_NONE;
2434         }
2435         I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2436
2437         /* wait one idle pattern time */
2438         POSTING_READ(reg);
2439         udelay(1000);
2440
2441         /* IVB wants error correction enabled */
2442         if (IS_IVYBRIDGE(dev))
2443                 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2444                            FDI_FE_ERRC_ENABLE);
2445 }
2446
2447 static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
2448 {
2449         return crtc->base.enabled && crtc->active &&
2450                 crtc->config.has_pch_encoder;
2451 }
2452
2453 static void ivb_modeset_global_resources(struct drm_device *dev)
2454 {
2455         struct drm_i915_private *dev_priv = dev->dev_private;
2456         struct intel_crtc *pipe_B_crtc =
2457                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2458         struct intel_crtc *pipe_C_crtc =
2459                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2460         uint32_t temp;
2461
2462         /*
2463          * When everything is off disable fdi C so that we could enable fdi B
2464          * with all lanes. Note that we don't care about enabled pipes without
2465          * an enabled pch encoder.
2466          */
2467         if (!pipe_has_enabled_pch(pipe_B_crtc) &&
2468             !pipe_has_enabled_pch(pipe_C_crtc)) {
2469                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2470                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2471
2472                 temp = I915_READ(SOUTH_CHICKEN1);
2473                 temp &= ~FDI_BC_BIFURCATION_SELECT;
2474                 DRM_DEBUG_KMS("disabling fdi C rx\n");
2475                 I915_WRITE(SOUTH_CHICKEN1, temp);
2476         }
2477 }
2478
2479 /* The FDI link training functions for ILK/Ibexpeak. */
2480 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2481 {
2482         struct drm_device *dev = crtc->dev;
2483         struct drm_i915_private *dev_priv = dev->dev_private;
2484         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2485         int pipe = intel_crtc->pipe;
2486         int plane = intel_crtc->plane;
2487         u32 reg, temp, tries;
2488
2489         /* FDI needs bits from pipe & plane first */
2490         assert_pipe_enabled(dev_priv, pipe);
2491         assert_plane_enabled(dev_priv, plane);
2492
2493         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2494            for train result */
2495         reg = FDI_RX_IMR(pipe);
2496         temp = I915_READ(reg);
2497         temp &= ~FDI_RX_SYMBOL_LOCK;
2498         temp &= ~FDI_RX_BIT_LOCK;
2499         I915_WRITE(reg, temp);
2500         I915_READ(reg);
2501         udelay(150);
2502
2503         /* enable CPU FDI TX and PCH FDI RX */
2504         reg = FDI_TX_CTL(pipe);
2505         temp = I915_READ(reg);
2506         temp &= ~FDI_DP_PORT_WIDTH_MASK;
2507         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2508         temp &= ~FDI_LINK_TRAIN_NONE;
2509         temp |= FDI_LINK_TRAIN_PATTERN_1;
2510         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2511
2512         reg = FDI_RX_CTL(pipe);
2513         temp = I915_READ(reg);
2514         temp &= ~FDI_LINK_TRAIN_NONE;
2515         temp |= FDI_LINK_TRAIN_PATTERN_1;
2516         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2517
2518         POSTING_READ(reg);
2519         udelay(150);
2520
2521         /* Ironlake workaround, enable clock pointer after FDI enable*/
2522         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2523         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2524                    FDI_RX_PHASE_SYNC_POINTER_EN);
2525
2526         reg = FDI_RX_IIR(pipe);
2527         for (tries = 0; tries < 5; tries++) {
2528                 temp = I915_READ(reg);
2529                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2530
2531                 if ((temp & FDI_RX_BIT_LOCK)) {
2532                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2533                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2534                         break;
2535                 }
2536         }
2537         if (tries == 5)
2538                 DRM_ERROR("FDI train 1 fail!\n");
2539
2540         /* Train 2 */
2541         reg = FDI_TX_CTL(pipe);
2542         temp = I915_READ(reg);
2543         temp &= ~FDI_LINK_TRAIN_NONE;
2544         temp |= FDI_LINK_TRAIN_PATTERN_2;
2545         I915_WRITE(reg, temp);
2546
2547         reg = FDI_RX_CTL(pipe);
2548         temp = I915_READ(reg);
2549         temp &= ~FDI_LINK_TRAIN_NONE;
2550         temp |= FDI_LINK_TRAIN_PATTERN_2;
2551         I915_WRITE(reg, temp);
2552
2553         POSTING_READ(reg);
2554         udelay(150);
2555
2556         reg = FDI_RX_IIR(pipe);
2557         for (tries = 0; tries < 5; tries++) {
2558                 temp = I915_READ(reg);
2559                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2560
2561                 if (temp & FDI_RX_SYMBOL_LOCK) {
2562                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2563                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2564                         break;
2565                 }
2566         }
2567         if (tries == 5)
2568                 DRM_ERROR("FDI train 2 fail!\n");
2569
2570         DRM_DEBUG_KMS("FDI train done\n");
2571
2572 }
2573
2574 static const int snb_b_fdi_train_param[] = {
2575         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2576         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2577         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2578         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2579 };
2580
2581 /* The FDI link training functions for SNB/Cougarpoint. */
2582 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2583 {
2584         struct drm_device *dev = crtc->dev;
2585         struct drm_i915_private *dev_priv = dev->dev_private;
2586         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2587         int pipe = intel_crtc->pipe;
2588         u32 reg, temp, i, retry;
2589
2590         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2591            for train result */
2592         reg = FDI_RX_IMR(pipe);
2593         temp = I915_READ(reg);
2594         temp &= ~FDI_RX_SYMBOL_LOCK;
2595         temp &= ~FDI_RX_BIT_LOCK;
2596         I915_WRITE(reg, temp);
2597
2598         POSTING_READ(reg);
2599         udelay(150);
2600
2601         /* enable CPU FDI TX and PCH FDI RX */
2602         reg = FDI_TX_CTL(pipe);
2603         temp = I915_READ(reg);
2604         temp &= ~FDI_DP_PORT_WIDTH_MASK;
2605         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2606         temp &= ~FDI_LINK_TRAIN_NONE;
2607         temp |= FDI_LINK_TRAIN_PATTERN_1;
2608         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2609         /* SNB-B */
2610         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2611         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2612
2613         I915_WRITE(FDI_RX_MISC(pipe),
2614                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2615
2616         reg = FDI_RX_CTL(pipe);
2617         temp = I915_READ(reg);
2618         if (HAS_PCH_CPT(dev)) {
2619                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2620                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2621         } else {
2622                 temp &= ~FDI_LINK_TRAIN_NONE;
2623                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2624         }
2625         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2626
2627         POSTING_READ(reg);
2628         udelay(150);
2629
2630         for (i = 0; i < 4; i++) {
2631                 reg = FDI_TX_CTL(pipe);
2632                 temp = I915_READ(reg);
2633                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2634                 temp |= snb_b_fdi_train_param[i];
2635                 I915_WRITE(reg, temp);
2636
2637                 POSTING_READ(reg);
2638                 udelay(500);
2639
2640                 for (retry = 0; retry < 5; retry++) {
2641                         reg = FDI_RX_IIR(pipe);
2642                         temp = I915_READ(reg);
2643                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2644                         if (temp & FDI_RX_BIT_LOCK) {
2645                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2646                                 DRM_DEBUG_KMS("FDI train 1 done.\n");
2647                                 break;
2648                         }
2649                         udelay(50);
2650                 }
2651                 if (retry < 5)
2652                         break;
2653         }
2654         if (i == 4)
2655                 DRM_ERROR("FDI train 1 fail!\n");
2656
2657         /* Train 2 */
2658         reg = FDI_TX_CTL(pipe);
2659         temp = I915_READ(reg);
2660         temp &= ~FDI_LINK_TRAIN_NONE;
2661         temp |= FDI_LINK_TRAIN_PATTERN_2;
2662         if (IS_GEN6(dev)) {
2663                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2664                 /* SNB-B */
2665                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2666         }
2667         I915_WRITE(reg, temp);
2668
2669         reg = FDI_RX_CTL(pipe);
2670         temp = I915_READ(reg);
2671         if (HAS_PCH_CPT(dev)) {
2672                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2673                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2674         } else {
2675                 temp &= ~FDI_LINK_TRAIN_NONE;
2676                 temp |= FDI_LINK_TRAIN_PATTERN_2;
2677         }
2678         I915_WRITE(reg, temp);
2679
2680         POSTING_READ(reg);
2681         udelay(150);
2682
2683         for (i = 0; i < 4; i++) {
2684                 reg = FDI_TX_CTL(pipe);
2685                 temp = I915_READ(reg);
2686                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2687                 temp |= snb_b_fdi_train_param[i];
2688                 I915_WRITE(reg, temp);
2689
2690                 POSTING_READ(reg);
2691                 udelay(500);
2692
2693                 for (retry = 0; retry < 5; retry++) {
2694                         reg = FDI_RX_IIR(pipe);
2695                         temp = I915_READ(reg);
2696                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2697                         if (temp & FDI_RX_SYMBOL_LOCK) {
2698                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2699                                 DRM_DEBUG_KMS("FDI train 2 done.\n");
2700                                 break;
2701                         }
2702                         udelay(50);
2703                 }
2704                 if (retry < 5)
2705                         break;
2706         }
2707         if (i == 4)
2708                 DRM_ERROR("FDI train 2 fail!\n");
2709
2710         DRM_DEBUG_KMS("FDI train done.\n");
2711 }
2712
2713 /* Manual link training for Ivy Bridge A0 parts */
2714 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2715 {
2716         struct drm_device *dev = crtc->dev;
2717         struct drm_i915_private *dev_priv = dev->dev_private;
2718         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2719         int pipe = intel_crtc->pipe;
2720         u32 reg, temp, i, j;
2721
2722         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2723            for train result */
2724         reg = FDI_RX_IMR(pipe);
2725         temp = I915_READ(reg);
2726         temp &= ~FDI_RX_SYMBOL_LOCK;
2727         temp &= ~FDI_RX_BIT_LOCK;
2728         I915_WRITE(reg, temp);
2729
2730         POSTING_READ(reg);
2731         udelay(150);
2732
2733         DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2734                       I915_READ(FDI_RX_IIR(pipe)));
2735
2736         /* Try each vswing and preemphasis setting twice before moving on */
2737         for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
2738                 /* disable first in case we need to retry */
2739                 reg = FDI_TX_CTL(pipe);
2740                 temp = I915_READ(reg);
2741                 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2742                 temp &= ~FDI_TX_ENABLE;
2743                 I915_WRITE(reg, temp);
2744
2745                 reg = FDI_RX_CTL(pipe);
2746                 temp = I915_READ(reg);
2747                 temp &= ~FDI_LINK_TRAIN_AUTO;
2748                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2749                 temp &= ~FDI_RX_ENABLE;
2750                 I915_WRITE(reg, temp);
2751
2752                 /* enable CPU FDI TX and PCH FDI RX */
2753                 reg = FDI_TX_CTL(pipe);
2754                 temp = I915_READ(reg);
2755                 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2756                 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2757                 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2758                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2759                 temp |= snb_b_fdi_train_param[j/2];
2760                 temp |= FDI_COMPOSITE_SYNC;
2761                 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2762
2763                 I915_WRITE(FDI_RX_MISC(pipe),
2764                            FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2765
2766                 reg = FDI_RX_CTL(pipe);
2767                 temp = I915_READ(reg);
2768                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2769                 temp |= FDI_COMPOSITE_SYNC;
2770                 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2771
2772                 POSTING_READ(reg);
2773                 udelay(1); /* should be 0.5us */
2774
2775                 for (i = 0; i < 4; i++) {
2776                         reg = FDI_RX_IIR(pipe);
2777                         temp = I915_READ(reg);
2778                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2779
2780                         if (temp & FDI_RX_BIT_LOCK ||
2781                             (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2782                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2783                                 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
2784                                               i);
2785                                 break;
2786                         }
2787                         udelay(1); /* should be 0.5us */
2788                 }
2789                 if (i == 4) {
2790                         DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
2791                         continue;
2792                 }
2793
2794                 /* Train 2 */
2795                 reg = FDI_TX_CTL(pipe);
2796                 temp = I915_READ(reg);
2797                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2798                 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2799                 I915_WRITE(reg, temp);
2800
2801                 reg = FDI_RX_CTL(pipe);
2802                 temp = I915_READ(reg);
2803                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2804                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2805                 I915_WRITE(reg, temp);
2806
2807                 POSTING_READ(reg);
2808                 udelay(2); /* should be 1.5us */
2809
2810                 for (i = 0; i < 4; i++) {
2811                         reg = FDI_RX_IIR(pipe);
2812                         temp = I915_READ(reg);
2813                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2814
2815                         if (temp & FDI_RX_SYMBOL_LOCK ||
2816                             (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
2817                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2818                                 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
2819                                               i);
2820                                 goto train_done;
2821                         }
2822                         udelay(2); /* should be 1.5us */
2823                 }
2824                 if (i == 4)
2825                         DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
2826         }
2827
2828 train_done:
2829         DRM_DEBUG_KMS("FDI train done.\n");
2830 }
2831
2832 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2833 {
2834         struct drm_device *dev = intel_crtc->base.dev;
2835         struct drm_i915_private *dev_priv = dev->dev_private;
2836         int pipe = intel_crtc->pipe;
2837         u32 reg, temp;
2838
2839
2840         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2841         reg = FDI_RX_CTL(pipe);
2842         temp = I915_READ(reg);
2843         temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
2844         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2845         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2846         I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2847
2848         POSTING_READ(reg);
2849         udelay(200);
2850
2851         /* Switch from Rawclk to PCDclk */
2852         temp = I915_READ(reg);
2853         I915_WRITE(reg, temp | FDI_PCDCLK);
2854
2855         POSTING_READ(reg);
2856         udelay(200);
2857
2858         /* Enable CPU FDI TX PLL, always on for Ironlake */
2859         reg = FDI_TX_CTL(pipe);
2860         temp = I915_READ(reg);
2861         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2862                 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2863
2864                 POSTING_READ(reg);
2865                 udelay(100);
2866         }
2867 }
2868
2869 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2870 {
2871         struct drm_device *dev = intel_crtc->base.dev;
2872         struct drm_i915_private *dev_priv = dev->dev_private;
2873         int pipe = intel_crtc->pipe;
2874         u32 reg, temp;
2875
2876         /* Switch from PCDclk to Rawclk */
2877         reg = FDI_RX_CTL(pipe);
2878         temp = I915_READ(reg);
2879         I915_WRITE(reg, temp & ~FDI_PCDCLK);
2880
2881         /* Disable CPU FDI TX PLL */
2882         reg = FDI_TX_CTL(pipe);
2883         temp = I915_READ(reg);
2884         I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2885
2886         POSTING_READ(reg);
2887         udelay(100);
2888
2889         reg = FDI_RX_CTL(pipe);
2890         temp = I915_READ(reg);
2891         I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2892
2893         /* Wait for the clocks to turn off. */
2894         POSTING_READ(reg);
2895         udelay(100);
2896 }
2897
2898 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2899 {
2900         struct drm_device *dev = crtc->dev;
2901         struct drm_i915_private *dev_priv = dev->dev_private;
2902         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2903         int pipe = intel_crtc->pipe;
2904         u32 reg, temp;
2905
2906         /* disable CPU FDI tx and PCH FDI rx */
2907         reg = FDI_TX_CTL(pipe);
2908         temp = I915_READ(reg);
2909         I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2910         POSTING_READ(reg);
2911
2912         reg = FDI_RX_CTL(pipe);
2913         temp = I915_READ(reg);
2914         temp &= ~(0x7 << 16);
2915         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2916         I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2917
2918         POSTING_READ(reg);
2919         udelay(100);
2920
2921         /* Ironlake workaround, disable clock pointer after downing FDI */
2922         if (HAS_PCH_IBX(dev)) {
2923                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2924         }
2925
2926         /* still set train pattern 1 */
2927         reg = FDI_TX_CTL(pipe);
2928         temp = I915_READ(reg);
2929         temp &= ~FDI_LINK_TRAIN_NONE;
2930         temp |= FDI_LINK_TRAIN_PATTERN_1;
2931         I915_WRITE(reg, temp);
2932
2933         reg = FDI_RX_CTL(pipe);
2934         temp = I915_READ(reg);
2935         if (HAS_PCH_CPT(dev)) {
2936                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2937                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2938         } else {
2939                 temp &= ~FDI_LINK_TRAIN_NONE;
2940                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2941         }
2942         /* BPC in FDI rx is consistent with that in PIPECONF */
2943         temp &= ~(0x07 << 16);
2944         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2945         I915_WRITE(reg, temp);
2946
2947         POSTING_READ(reg);
2948         udelay(100);
2949 }
2950
2951 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2952 {
2953         struct drm_device *dev = crtc->dev;
2954         struct drm_i915_private *dev_priv = dev->dev_private;
2955         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2956         unsigned long flags;
2957         bool pending;
2958
2959         if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2960             intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2961                 return false;
2962
2963         spin_lock_irqsave(&dev->event_lock, flags);
2964         pending = to_intel_crtc(crtc)->unpin_work != NULL;
2965         spin_unlock_irqrestore(&dev->event_lock, flags);
2966
2967         return pending;
2968 }
2969
2970 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2971 {
2972         struct drm_device *dev = crtc->dev;
2973         struct drm_i915_private *dev_priv = dev->dev_private;
2974
2975         if (crtc->fb == NULL)
2976                 return;
2977
2978         WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
2979
2980         wait_event(dev_priv->pending_flip_queue,
2981                    !intel_crtc_has_pending_flip(crtc));
2982
2983         mutex_lock(&dev->struct_mutex);
2984         intel_finish_fb(crtc->fb);
2985         mutex_unlock(&dev->struct_mutex);
2986 }
2987
2988 /* Program iCLKIP clock to the desired frequency */
2989 static void lpt_program_iclkip(struct drm_crtc *crtc)
2990 {
2991         struct drm_device *dev = crtc->dev;
2992         struct drm_i915_private *dev_priv = dev->dev_private;
2993         int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
2994         u32 divsel, phaseinc, auxdiv, phasedir = 0;
2995         u32 temp;
2996
2997         mutex_lock(&dev_priv->dpio_lock);
2998
2999         /* It is necessary to ungate the pixclk gate prior to programming
3000          * the divisors, and gate it back when it is done.
3001          */
3002         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3003
3004         /* Disable SSCCTL */
3005         intel_sbi_write(dev_priv, SBI_SSCCTL6,
3006                         intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3007                                 SBI_SSCCTL_DISABLE,
3008                         SBI_ICLK);
3009
3010         /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3011         if (clock == 20000) {
3012                 auxdiv = 1;
3013                 divsel = 0x41;
3014                 phaseinc = 0x20;
3015         } else {
3016                 /* The iCLK virtual clock root frequency is in MHz,
3017                  * but the adjusted_mode->crtc_clock in in KHz. To get the
3018                  * divisors, it is necessary to divide one by another, so we
3019                  * convert the virtual clock precision to KHz here for higher
3020                  * precision.
3021                  */
3022                 u32 iclk_virtual_root_freq = 172800 * 1000;
3023                 u32 iclk_pi_range = 64;
3024                 u32 desired_divisor, msb_divisor_value, pi_value;
3025
3026                 desired_divisor = (iclk_virtual_root_freq / clock);
3027                 msb_divisor_value = desired_divisor / iclk_pi_range;
3028                 pi_value = desired_divisor % iclk_pi_range;
3029
3030                 auxdiv = 0;
3031                 divsel = msb_divisor_value - 2;
3032                 phaseinc = pi_value;
3033         }
3034
3035         /* This should not happen with any sane values */
3036         WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3037                 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3038         WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3039                 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3040
3041         DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3042                         clock,
3043                         auxdiv,
3044                         divsel,
3045                         phasedir,
3046                         phaseinc);
3047
3048         /* Program SSCDIVINTPHASE6 */
3049         temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3050         temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3051         temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3052         temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3053         temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3054         temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3055         temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3056         intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3057
3058         /* Program SSCAUXDIV */
3059         temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3060         temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3061         temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3062         intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3063
3064         /* Enable modulator and associated divider */
3065         temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3066         temp &= ~SBI_SSCCTL_DISABLE;
3067         intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3068
3069         /* Wait for initialization time */
3070         udelay(24);
3071
3072         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3073
3074         mutex_unlock(&dev_priv->dpio_lock);
3075 }
3076
3077 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3078                                                 enum pipe pch_transcoder)
3079 {
3080         struct drm_device *dev = crtc->base.dev;
3081         struct drm_i915_private *dev_priv = dev->dev_private;
3082         enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
3083
3084         I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
3085                    I915_READ(HTOTAL(cpu_transcoder)));
3086         I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
3087                    I915_READ(HBLANK(cpu_transcoder)));
3088         I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
3089                    I915_READ(HSYNC(cpu_transcoder)));
3090
3091         I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
3092                    I915_READ(VTOTAL(cpu_transcoder)));
3093         I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
3094                    I915_READ(VBLANK(cpu_transcoder)));
3095         I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
3096                    I915_READ(VSYNC(cpu_transcoder)));
3097         I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
3098                    I915_READ(VSYNCSHIFT(cpu_transcoder)));
3099 }
3100
3101 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
3102 {
3103         struct drm_i915_private *dev_priv = dev->dev_private;
3104         uint32_t temp;
3105
3106         temp = I915_READ(SOUTH_CHICKEN1);
3107         if (temp & FDI_BC_BIFURCATION_SELECT)
3108                 return;
3109
3110         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
3111         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
3112
3113         temp |= FDI_BC_BIFURCATION_SELECT;
3114         DRM_DEBUG_KMS("enabling fdi C rx\n");
3115         I915_WRITE(SOUTH_CHICKEN1, temp);
3116         POSTING_READ(SOUTH_CHICKEN1);
3117 }
3118
3119 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
3120 {
3121         struct drm_device *dev = intel_crtc->base.dev;
3122         struct drm_i915_private *dev_priv = dev->dev_private;
3123
3124         switch (intel_crtc->pipe) {
3125         case PIPE_A:
3126                 break;
3127         case PIPE_B:
3128                 if (intel_crtc->config.fdi_lanes > 2)
3129                         WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
3130                 else
3131                         cpt_enable_fdi_bc_bifurcation(dev);
3132
3133                 break;
3134         case PIPE_C:
3135                 cpt_enable_fdi_bc_bifurcation(dev);
3136
3137                 break;
3138         default:
3139                 BUG();
3140         }
3141 }
3142
3143 /*
3144  * Enable PCH resources required for PCH ports:
3145  *   - PCH PLLs
3146  *   - FDI training & RX/TX
3147  *   - update transcoder timings
3148  *   - DP transcoding bits
3149  *   - transcoder
3150  */
3151 static void ironlake_pch_enable(struct drm_crtc *crtc)
3152 {
3153         struct drm_device *dev = crtc->dev;
3154         struct drm_i915_private *dev_priv = dev->dev_private;
3155         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3156         int pipe = intel_crtc->pipe;
3157         u32 reg, temp;
3158
3159         assert_pch_transcoder_disabled(dev_priv, pipe);
3160
3161         if (IS_IVYBRIDGE(dev))
3162                 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
3163
3164         /* Write the TU size bits before fdi link training, so that error
3165          * detection works. */
3166         I915_WRITE(FDI_RX_TUSIZE1(pipe),
3167                    I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3168
3169         /* For PCH output, training FDI link */
3170         dev_priv->display.fdi_link_train(crtc);
3171
3172         /* We need to program the right clock selection before writing the pixel
3173          * mutliplier into the DPLL. */
3174         if (HAS_PCH_CPT(dev)) {
3175                 u32 sel;
3176
3177                 temp = I915_READ(PCH_DPLL_SEL);
3178                 temp |= TRANS_DPLL_ENABLE(pipe);
3179                 sel = TRANS_DPLLB_SEL(pipe);
3180                 if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B)
3181                         temp |= sel;
3182                 else
3183                         temp &= ~sel;
3184                 I915_WRITE(PCH_DPLL_SEL, temp);
3185         }
3186
3187         /* XXX: pch pll's can be enabled any time before we enable the PCH
3188          * transcoder, and we actually should do this to not upset any PCH
3189          * transcoder that already use the clock when we share it.
3190          *
3191          * Note that enable_shared_dpll tries to do the right thing, but
3192          * get_shared_dpll unconditionally resets the pll - we need that to have
3193          * the right LVDS enable sequence. */
3194         ironlake_enable_shared_dpll(intel_crtc);
3195
3196         /* set transcoder timing, panel must allow it */
3197         assert_panel_unlocked(dev_priv, pipe);
3198         ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
3199
3200         intel_fdi_normal_train(crtc);
3201
3202         /* For PCH DP, enable TRANS_DP_CTL */
3203         if (HAS_PCH_CPT(dev) &&
3204             (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3205              intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3206                 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3207                 reg = TRANS_DP_CTL(pipe);
3208                 temp = I915_READ(reg);
3209                 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3210                           TRANS_DP_SYNC_MASK |
3211                           TRANS_DP_BPC_MASK);
3212                 temp |= (TRANS_DP_OUTPUT_ENABLE |
3213                          TRANS_DP_ENH_FRAMING);
3214                 temp |= bpc << 9; /* same format but at 11:9 */
3215
3216                 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3217                         temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3218                 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3219                         temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3220
3221                 switch (intel_trans_dp_port_sel(crtc)) {
3222                 case PCH_DP_B:
3223                         temp |= TRANS_DP_PORT_SEL_B;
3224                         break;
3225                 case PCH_DP_C:
3226                         temp |= TRANS_DP_PORT_SEL_C;
3227                         break;
3228                 case PCH_DP_D:
3229                         temp |= TRANS_DP_PORT_SEL_D;
3230                         break;
3231                 default:
3232                         BUG();
3233                 }
3234
3235                 I915_WRITE(reg, temp);
3236         }
3237
3238         ironlake_enable_pch_transcoder(dev_priv, pipe);
3239 }
3240
3241 static void lpt_pch_enable(struct drm_crtc *crtc)
3242 {
3243         struct drm_device *dev = crtc->dev;
3244         struct drm_i915_private *dev_priv = dev->dev_private;
3245         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3246         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3247
3248         assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
3249
3250         lpt_program_iclkip(crtc);
3251
3252         /* Set transcoder timing. */
3253         ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
3254
3255         lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3256 }
3257
3258 static void intel_put_shared_dpll(struct intel_crtc *crtc)
3259 {
3260         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3261
3262         if (pll == NULL)
3263                 return;
3264
3265         if (pll->refcount == 0) {
3266                 WARN(1, "bad %s refcount\n", pll->name);
3267                 return;
3268         }
3269
3270         if (--pll->refcount == 0) {
3271                 WARN_ON(pll->on);
3272                 WARN_ON(pll->active);
3273         }
3274
3275         crtc->config.shared_dpll = DPLL_ID_PRIVATE;
3276 }
3277
3278 static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
3279 {
3280         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3281         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3282         enum intel_dpll_id i;
3283
3284         if (pll) {
3285                 DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
3286                               crtc->base.base.id, pll->name);
3287                 intel_put_shared_dpll(crtc);
3288         }
3289
3290         if (HAS_PCH_IBX(dev_priv->dev)) {
3291                 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3292                 i = (enum intel_dpll_id) crtc->pipe;
3293                 pll = &dev_priv->shared_dplls[i];
3294
3295                 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
3296                               crtc->base.base.id, pll->name);
3297
3298                 goto found;
3299         }
3300
3301         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3302                 pll = &dev_priv->shared_dplls[i];
3303
3304                 /* Only want to check enabled timings first */
3305                 if (pll->refcount == 0)
3306                         continue;
3307
3308                 if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state,
3309                            sizeof(pll->hw_state)) == 0) {
3310                         DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
3311                                       crtc->base.base.id,
3312                                       pll->name, pll->refcount, pll->active);
3313
3314                         goto found;
3315                 }
3316         }
3317
3318         /* Ok no matching timings, maybe there's a free one? */
3319         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3320                 pll = &dev_priv->shared_dplls[i];
3321                 if (pll->refcount == 0) {
3322                         DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
3323                                       crtc->base.base.id, pll->name);
3324                         goto found;
3325                 }
3326         }
3327
3328         return NULL;
3329
3330 found:
3331         crtc->config.shared_dpll = i;
3332         DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
3333                          pipe_name(crtc->pipe));
3334
3335         if (pll->active == 0) {
3336                 memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
3337                        sizeof(pll->hw_state));
3338
3339                 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
3340                 WARN_ON(pll->on);
3341                 assert_shared_dpll_disabled(dev_priv, pll);
3342
3343                 pll->mode_set(dev_priv, pll);
3344         }
3345         pll->refcount++;
3346
3347         return pll;
3348 }
3349
3350 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
3351 {
3352         struct drm_i915_private *dev_priv = dev->dev_private;
3353         int dslreg = PIPEDSL(pipe);
3354         u32 temp;
3355
3356         temp = I915_READ(dslreg);
3357         udelay(500);
3358         if (wait_for(I915_READ(dslreg) != temp, 5)) {
3359                 if (wait_for(I915_READ(dslreg) != temp, 5))
3360                         DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
3361         }
3362 }
3363
3364 static void ironlake_pfit_enable(struct intel_crtc *crtc)
3365 {
3366         struct drm_device *dev = crtc->base.dev;
3367         struct drm_i915_private *dev_priv = dev->dev_private;
3368         int pipe = crtc->pipe;
3369
3370         if (crtc->config.pch_pfit.enabled) {
3371                 /* Force use of hard-coded filter coefficients
3372                  * as some pre-programmed values are broken,
3373                  * e.g. x201.
3374                  */
3375                 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
3376                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3377                                                  PF_PIPE_SEL_IVB(pipe));
3378                 else
3379                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3380                 I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
3381                 I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
3382         }
3383 }
3384
3385 static void intel_enable_planes(struct drm_crtc *crtc)
3386 {
3387         struct drm_device *dev = crtc->dev;
3388         enum pipe pipe = to_intel_crtc(crtc)->pipe;
3389         struct intel_plane *intel_plane;
3390
3391         list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3392                 if (intel_plane->pipe == pipe)
3393                         intel_plane_restore(&intel_plane->base);
3394 }
3395
3396 static void intel_disable_planes(struct drm_crtc *crtc)
3397 {
3398         struct drm_device *dev = crtc->dev;
3399         enum pipe pipe = to_intel_crtc(crtc)->pipe;
3400         struct intel_plane *intel_plane;
3401
3402         list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3403                 if (intel_plane->pipe == pipe)
3404                         intel_plane_disable(&intel_plane->base);
3405 }
3406
3407 void hsw_enable_ips(struct intel_crtc *crtc)
3408 {
3409         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3410
3411         if (!crtc->config.ips_enabled)
3412                 return;
3413
3414         /* We can only enable IPS after we enable a plane and wait for a vblank.
3415          * We guarantee that the plane is enabled by calling intel_enable_ips
3416          * only after intel_enable_plane. And intel_enable_plane already waits
3417          * for a vblank, so all we need to do here is to enable the IPS bit. */
3418         assert_plane_enabled(dev_priv, crtc->plane);
3419         if (IS_BROADWELL(crtc->base.dev)) {
3420                 mutex_lock(&dev_priv->rps.hw_lock);
3421                 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
3422                 mutex_unlock(&dev_priv->rps.hw_lock);
3423                 /* Quoting Art Runyan: "its not safe to expect any particular
3424                  * value in IPS_CTL bit 31 after enabling IPS through the
3425                  * mailbox." Therefore we need to defer waiting on the state
3426                  * change.
3427                  * TODO: need to fix this for state checker
3428                  */
3429         } else {
3430                 I915_WRITE(IPS_CTL, IPS_ENABLE);
3431                 /* The bit only becomes 1 in the next vblank, so this wait here
3432                  * is essentially intel_wait_for_vblank. If we don't have this
3433                  * and don't wait for vblanks until the end of crtc_enable, then
3434                  * the HW state readout code will complain that the expected
3435                  * IPS_CTL value is not the one we read. */
3436                 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
3437                         DRM_ERROR("Timed out waiting for IPS enable\n");
3438         }
3439 }
3440
3441 void hsw_disable_ips(struct intel_crtc *crtc)
3442 {
3443         struct drm_device *dev = crtc->base.dev;
3444         struct drm_i915_private *dev_priv = dev->dev_private;
3445
3446         if (!crtc->config.ips_enabled)
3447                 return;
3448
3449         assert_plane_enabled(dev_priv, crtc->plane);
3450         if (IS_BROADWELL(crtc->base.dev)) {
3451                 mutex_lock(&dev_priv->rps.hw_lock);
3452                 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
3453                 mutex_unlock(&dev_priv->rps.hw_lock);
3454         } else
3455                 I915_WRITE(IPS_CTL, 0);
3456         POSTING_READ(IPS_CTL);
3457
3458         /* We need to wait for a vblank before we can disable the plane. */
3459         intel_wait_for_vblank(dev, crtc->pipe);
3460 }
3461
3462 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3463 static void intel_crtc_load_lut(struct drm_crtc *crtc)
3464 {
3465         struct drm_device *dev = crtc->dev;
3466         struct drm_i915_private *dev_priv = dev->dev_private;
3467         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3468         enum pipe pipe = intel_crtc->pipe;
3469         int palreg = PALETTE(pipe);
3470         int i;
3471         bool reenable_ips = false;
3472
3473         /* The clocks have to be on to load the palette. */
3474         if (!crtc->enabled || !intel_crtc->active)
3475                 return;
3476
3477         if (!HAS_PCH_SPLIT(dev_priv->dev)) {
3478                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
3479                         assert_dsi_pll_enabled(dev_priv);
3480                 else
3481                         assert_pll_enabled(dev_priv, pipe);
3482         }
3483
3484         /* use legacy palette for Ironlake */
3485         if (HAS_PCH_SPLIT(dev))
3486                 palreg = LGC_PALETTE(pipe);
3487
3488         /* Workaround : Do not read or write the pipe palette/gamma data while
3489          * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
3490          */
3491         if (intel_crtc->config.ips_enabled &&
3492             ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
3493              GAMMA_MODE_MODE_SPLIT)) {
3494                 hsw_disable_ips(intel_crtc);
3495                 reenable_ips = true;
3496         }
3497
3498         for (i = 0; i < 256; i++) {
3499                 I915_WRITE(palreg + 4 * i,
3500                            (intel_crtc->lut_r[i] << 16) |
3501                            (intel_crtc->lut_g[i] << 8) |
3502                            intel_crtc->lut_b[i]);
3503         }
3504
3505         if (reenable_ips)
3506                 hsw_enable_ips(intel_crtc);
3507 }
3508
3509 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3510 {
3511         struct drm_device *dev = crtc->dev;
3512         struct drm_i915_private *dev_priv = dev->dev_private;
3513         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3514         struct intel_encoder *encoder;
3515         int pipe = intel_crtc->pipe;
3516         int plane = intel_crtc->plane;
3517
3518         WARN_ON(!crtc->enabled);
3519
3520         if (intel_crtc->active)
3521                 return;
3522
3523         intel_crtc->active = true;
3524
3525         intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3526         intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3527
3528         for_each_encoder_on_crtc(dev, crtc, encoder)
3529                 if (encoder->pre_enable)
3530                         encoder->pre_enable(encoder);
3531
3532         if (intel_crtc->config.has_pch_encoder) {
3533                 /* Note: FDI PLL enabling _must_ be done before we enable the
3534                  * cpu pipes, hence this is separate from all the other fdi/pch
3535                  * enabling. */
3536                 ironlake_fdi_pll_enable(intel_crtc);
3537         } else {
3538                 assert_fdi_tx_disabled(dev_priv, pipe);
3539                 assert_fdi_rx_disabled(dev_priv, pipe);
3540         }
3541
3542         ironlake_pfit_enable(intel_crtc);
3543
3544         /*
3545          * On ILK+ LUT must be loaded before the pipe is running but with
3546          * clocks enabled
3547          */
3548         intel_crtc_load_lut(crtc);
3549
3550         intel_update_watermarks(crtc);
3551         intel_enable_pipe(dev_priv, pipe,
3552                           intel_crtc->config.has_pch_encoder, false);
3553         intel_enable_primary_plane(dev_priv, plane, pipe);
3554         intel_enable_planes(crtc);
3555         intel_crtc_update_cursor(crtc, true);
3556
3557         if (intel_crtc->config.has_pch_encoder)
3558                 ironlake_pch_enable(crtc);
3559
3560         mutex_lock(&dev->struct_mutex);
3561         intel_update_fbc(dev);
3562         mutex_unlock(&dev->struct_mutex);
3563
3564         for_each_encoder_on_crtc(dev, crtc, encoder)
3565                 encoder->enable(encoder);
3566
3567         if (HAS_PCH_CPT(dev))
3568                 cpt_verify_modeset(dev, intel_crtc->pipe);
3569
3570         /*
3571          * There seems to be a race in PCH platform hw (at least on some
3572          * outputs) where an enabled pipe still completes any pageflip right
3573          * away (as if the pipe is off) instead of waiting for vblank. As soon
3574          * as the first vblank happend, everything works as expected. Hence just
3575          * wait for one vblank before returning to avoid strange things
3576          * happening.
3577          */
3578         intel_wait_for_vblank(dev, intel_crtc->pipe);
3579 }
3580
3581 /* IPS only exists on ULT machines and is tied to pipe A. */
3582 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
3583 {
3584         return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
3585 }
3586
3587 static void haswell_crtc_enable_planes(struct drm_crtc *crtc)
3588 {
3589         struct drm_device *dev = crtc->dev;
3590         struct drm_i915_private *dev_priv = dev->dev_private;
3591         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3592         int pipe = intel_crtc->pipe;
3593         int plane = intel_crtc->plane;
3594
3595         intel_enable_primary_plane(dev_priv, plane, pipe);
3596         intel_enable_planes(crtc);
3597         intel_crtc_update_cursor(crtc, true);
3598
3599         hsw_enable_ips(intel_crtc);
3600
3601         mutex_lock(&dev->struct_mutex);
3602         intel_update_fbc(dev);
3603         mutex_unlock(&dev->struct_mutex);
3604 }
3605
3606 static void haswell_crtc_disable_planes(struct drm_crtc *crtc)
3607 {
3608         struct drm_device *dev = crtc->dev;
3609         struct drm_i915_private *dev_priv = dev->dev_private;
3610         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3611         int pipe = intel_crtc->pipe;
3612         int plane = intel_crtc->plane;
3613
3614         intel_crtc_wait_for_pending_flips(crtc);
3615         drm_vblank_off(dev, pipe);
3616
3617         /* FBC must be disabled before disabling the plane on HSW. */
3618         if (dev_priv->fbc.plane == plane)
3619                 intel_disable_fbc(dev);
3620
3621         hsw_disable_ips(intel_crtc);
3622
3623         intel_crtc_update_cursor(crtc, false);
3624         intel_disable_planes(crtc);
3625         intel_disable_primary_plane(dev_priv, plane, pipe);
3626 }
3627
3628 /*
3629  * This implements the workaround described in the "notes" section of the mode
3630  * set sequence documentation. When going from no pipes or single pipe to
3631  * multiple pipes, and planes are enabled after the pipe, we need to wait at
3632  * least 2 vblanks on the first pipe before enabling planes on the second pipe.
3633  */
3634 static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
3635 {
3636         struct drm_device *dev = crtc->base.dev;
3637         struct intel_crtc *crtc_it, *other_active_crtc = NULL;
3638
3639         /* We want to get the other_active_crtc only if there's only 1 other
3640          * active crtc. */
3641         list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) {
3642                 if (!crtc_it->active || crtc_it == crtc)
3643                         continue;
3644
3645                 if (other_active_crtc)
3646                         return;
3647
3648                 other_active_crtc = crtc_it;
3649         }
3650         if (!other_active_crtc)
3651                 return;
3652
3653         intel_wait_for_vblank(dev, other_active_crtc->pipe);
3654         intel_wait_for_vblank(dev, other_active_crtc->pipe);
3655 }
3656
3657 static void haswell_crtc_enable(struct drm_crtc *crtc)
3658 {
3659         struct drm_device *dev = crtc->dev;
3660         struct drm_i915_private *dev_priv = dev->dev_private;
3661         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3662         struct intel_encoder *encoder;
3663         int pipe = intel_crtc->pipe;
3664
3665         WARN_ON(!crtc->enabled);
3666
3667         if (intel_crtc->active)
3668                 return;
3669
3670         intel_crtc->active = true;
3671
3672         intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3673         if (intel_crtc->config.has_pch_encoder)
3674                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3675
3676         if (intel_crtc->config.has_pch_encoder)
3677                 dev_priv->display.fdi_link_train(crtc);
3678
3679         for_each_encoder_on_crtc(dev, crtc, encoder)
3680                 if (encoder->pre_enable)
3681                         encoder->pre_enable(encoder);
3682
3683         intel_ddi_enable_pipe_clock(intel_crtc);
3684
3685         ironlake_pfit_enable(intel_crtc);
3686
3687         /*
3688          * On ILK+ LUT must be loaded before the pipe is running but with
3689          * clocks enabled
3690          */
3691         intel_crtc_load_lut(crtc);
3692
3693         intel_ddi_set_pipe_settings(crtc);
3694         intel_ddi_enable_transcoder_func(crtc);
3695
3696         intel_update_watermarks(crtc);
3697         intel_enable_pipe(dev_priv, pipe,
3698                           intel_crtc->config.has_pch_encoder, false);
3699
3700         if (intel_crtc->config.has_pch_encoder)
3701                 lpt_pch_enable(crtc);
3702
3703         for_each_encoder_on_crtc(dev, crtc, encoder) {
3704                 encoder->enable(encoder);
3705                 intel_opregion_notify_encoder(encoder, true);
3706         }
3707
3708         /* If we change the relative order between pipe/planes enabling, we need
3709          * to change the workaround. */
3710         haswell_mode_set_planes_workaround(intel_crtc);
3711         haswell_crtc_enable_planes(crtc);
3712
3713         /*
3714          * There seems to be a race in PCH platform hw (at least on some
3715          * outputs) where an enabled pipe still completes any pageflip right
3716          * away (as if the pipe is off) instead of waiting for vblank. As soon
3717          * as the first vblank happend, everything works as expected. Hence just
3718          * wait for one vblank before returning to avoid strange things
3719          * happening.
3720          */
3721         intel_wait_for_vblank(dev, intel_crtc->pipe);
3722 }
3723
3724 static void ironlake_pfit_disable(struct intel_crtc *crtc)
3725 {
3726         struct drm_device *dev = crtc->base.dev;
3727         struct drm_i915_private *dev_priv = dev->dev_private;
3728         int pipe = crtc->pipe;
3729
3730         /* To avoid upsetting the power well on haswell only disable the pfit if
3731          * it's in use. The hw state code will make sure we get this right. */
3732         if (crtc->config.pch_pfit.enabled) {
3733                 I915_WRITE(PF_CTL(pipe), 0);
3734                 I915_WRITE(PF_WIN_POS(pipe), 0);
3735                 I915_WRITE(PF_WIN_SZ(pipe), 0);
3736         }
3737 }
3738
3739 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3740 {
3741         struct drm_device *dev = crtc->dev;
3742         struct drm_i915_private *dev_priv = dev->dev_private;
3743         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3744         struct intel_encoder *encoder;
3745         int pipe = intel_crtc->pipe;
3746         int plane = intel_crtc->plane;
3747         u32 reg, temp;
3748
3749
3750         if (!intel_crtc->active)
3751                 return;
3752
3753         for_each_encoder_on_crtc(dev, crtc, encoder)
3754                 encoder->disable(encoder);
3755
3756         intel_crtc_wait_for_pending_flips(crtc);
3757         drm_vblank_off(dev, pipe);
3758
3759         if (dev_priv->fbc.plane == plane)
3760                 intel_disable_fbc(dev);
3761
3762         intel_crtc_update_cursor(crtc, false);
3763         intel_disable_planes(crtc);
3764         intel_disable_primary_plane(dev_priv, plane, pipe);
3765
3766         if (intel_crtc->config.has_pch_encoder)
3767                 intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
3768
3769         intel_disable_pipe(dev_priv, pipe);
3770
3771         ironlake_pfit_disable(intel_crtc);
3772
3773         for_each_encoder_on_crtc(dev, crtc, encoder)
3774                 if (encoder->post_disable)
3775                         encoder->post_disable(encoder);
3776
3777         if (intel_crtc->config.has_pch_encoder) {
3778                 ironlake_fdi_disable(crtc);
3779
3780                 ironlake_disable_pch_transcoder(dev_priv, pipe);
3781                 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3782
3783                 if (HAS_PCH_CPT(dev)) {
3784                         /* disable TRANS_DP_CTL */
3785                         reg = TRANS_DP_CTL(pipe);
3786                         temp = I915_READ(reg);
3787                         temp &= ~(TRANS_DP_OUTPUT_ENABLE |
3788                                   TRANS_DP_PORT_SEL_MASK);
3789                         temp |= TRANS_DP_PORT_SEL_NONE;
3790                         I915_WRITE(reg, temp);
3791
3792                         /* disable DPLL_SEL */
3793                         temp = I915_READ(PCH_DPLL_SEL);
3794                         temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
3795                         I915_WRITE(PCH_DPLL_SEL, temp);
3796                 }
3797
3798                 /* disable PCH DPLL */
3799                 intel_disable_shared_dpll(intel_crtc);
3800
3801                 ironlake_fdi_pll_disable(intel_crtc);
3802         }
3803
3804         intel_crtc->active = false;
3805         intel_update_watermarks(crtc);
3806
3807         mutex_lock(&dev->struct_mutex);
3808         intel_update_fbc(dev);
3809         mutex_unlock(&dev->struct_mutex);
3810 }
3811
3812 static void haswell_crtc_disable(struct drm_crtc *crtc)
3813 {
3814         struct drm_device *dev = crtc->dev;
3815         struct drm_i915_private *dev_priv = dev->dev_private;
3816         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3817         struct intel_encoder *encoder;
3818         int pipe = intel_crtc->pipe;
3819         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3820
3821         if (!intel_crtc->active)
3822                 return;
3823
3824         haswell_crtc_disable_planes(crtc);
3825
3826         for_each_encoder_on_crtc(dev, crtc, encoder) {
3827                 intel_opregion_notify_encoder(encoder, false);
3828                 encoder->disable(encoder);
3829         }
3830
3831         if (intel_crtc->config.has_pch_encoder)
3832                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false);
3833         intel_disable_pipe(dev_priv, pipe);
3834
3835         intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3836
3837         ironlake_pfit_disable(intel_crtc);
3838
3839         intel_ddi_disable_pipe_clock(intel_crtc);
3840
3841         for_each_encoder_on_crtc(dev, crtc, encoder)
3842                 if (encoder->post_disable)
3843                         encoder->post_disable(encoder);
3844
3845         if (intel_crtc->config.has_pch_encoder) {
3846                 lpt_disable_pch_transcoder(dev_priv);
3847                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3848                 intel_ddi_fdi_disable(crtc);
3849         }
3850
3851         intel_crtc->active = false;
3852         intel_update_watermarks(crtc);
3853
3854         mutex_lock(&dev->struct_mutex);
3855         intel_update_fbc(dev);
3856         mutex_unlock(&dev->struct_mutex);
3857 }
3858
3859 static void ironlake_crtc_off(struct drm_crtc *crtc)
3860 {
3861         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3862         intel_put_shared_dpll(intel_crtc);
3863 }
3864
3865 static void haswell_crtc_off(struct drm_crtc *crtc)
3866 {
3867         intel_ddi_put_crtc_pll(crtc);
3868 }
3869
3870 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3871 {
3872         if (!enable && intel_crtc->overlay) {
3873                 struct drm_device *dev = intel_crtc->base.dev;
3874                 struct drm_i915_private *dev_priv = dev->dev_private;
3875
3876                 mutex_lock(&dev->struct_mutex);
3877                 dev_priv->mm.interruptible = false;
3878                 (void) intel_overlay_switch_off(intel_crtc->overlay);
3879                 dev_priv->mm.interruptible = true;
3880                 mutex_unlock(&dev->struct_mutex);
3881         }
3882
3883         /* Let userspace switch the overlay on again. In most cases userspace
3884          * has to recompute where to put it anyway.
3885          */
3886 }
3887
3888 /**
3889  * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
3890  * cursor plane briefly if not already running after enabling the display
3891  * plane.
3892  * This workaround avoids occasional blank screens when self refresh is
3893  * enabled.
3894  */
3895 static void
3896 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
3897 {
3898         u32 cntl = I915_READ(CURCNTR(pipe));
3899
3900         if ((cntl & CURSOR_MODE) == 0) {
3901                 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
3902
3903                 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
3904                 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
3905                 intel_wait_for_vblank(dev_priv->dev, pipe);
3906                 I915_WRITE(CURCNTR(pipe), cntl);
3907                 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
3908                 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
3909         }
3910 }
3911
3912 static void i9xx_pfit_enable(struct intel_crtc *crtc)
3913 {
3914         struct drm_device *dev = crtc->base.dev;
3915         struct drm_i915_private *dev_priv = dev->dev_private;
3916         struct intel_crtc_config *pipe_config = &crtc->config;
3917
3918         if (!crtc->config.gmch_pfit.control)
3919                 return;
3920
3921         /*
3922          * The panel fitter should only be adjusted whilst the pipe is disabled,
3923          * according to register description and PRM.
3924          */
3925         WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
3926         assert_pipe_disabled(dev_priv, crtc->pipe);
3927
3928         I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
3929         I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
3930
3931         /* Border color in case we don't scale up to the full screen. Black by
3932          * default, change to something else for debugging. */
3933         I915_WRITE(BCLRPAT(crtc->pipe), 0);
3934 }
3935
3936 int valleyview_get_vco(struct drm_i915_private *dev_priv)
3937 {
3938         int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
3939
3940         /* Obtain SKU information */
3941         mutex_lock(&dev_priv->dpio_lock);
3942         hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
3943                 CCK_FUSE_HPLL_FREQ_MASK;
3944         mutex_unlock(&dev_priv->dpio_lock);
3945
3946         return vco_freq[hpll_freq];
3947 }
3948
3949 /* Adjust CDclk dividers to allow high res or save power if possible */
3950 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
3951 {
3952         struct drm_i915_private *dev_priv = dev->dev_private;
3953         u32 val, cmd;
3954
3955         if (cdclk >= 320) /* jump to highest voltage for 400MHz too */
3956                 cmd = 2;
3957         else if (cdclk == 266)
3958                 cmd = 1;
3959         else
3960                 cmd = 0;
3961
3962         mutex_lock(&dev_priv->rps.hw_lock);
3963         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
3964         val &= ~DSPFREQGUAR_MASK;
3965         val |= (cmd << DSPFREQGUAR_SHIFT);
3966         vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
3967         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
3968                       DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
3969                      50)) {
3970                 DRM_ERROR("timed out waiting for CDclk change\n");
3971         }
3972         mutex_unlock(&dev_priv->rps.hw_lock);
3973
3974         if (cdclk == 400) {
3975                 u32 divider, vco;
3976
3977                 vco = valleyview_get_vco(dev_priv);
3978                 divider = ((vco << 1) / cdclk) - 1;
3979
3980                 mutex_lock(&dev_priv->dpio_lock);
3981                 /* adjust cdclk divider */
3982                 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
3983                 val &= ~0xf;
3984                 val |= divider;
3985                 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
3986                 mutex_unlock(&dev_priv->dpio_lock);
3987         }
3988
3989         mutex_lock(&dev_priv->dpio_lock);
3990         /* adjust self-refresh exit latency value */
3991         val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
3992         val &= ~0x7f;
3993
3994         /*
3995          * For high bandwidth configs, we set a higher latency in the bunit
3996          * so that the core display fetch happens in time to avoid underruns.
3997          */
3998         if (cdclk == 400)
3999                 val |= 4500 / 250; /* 4.5 usec */
4000         else
4001                 val |= 3000 / 250; /* 3.0 usec */
4002         vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
4003         mutex_unlock(&dev_priv->dpio_lock);
4004
4005         /* Since we changed the CDclk, we need to update the GMBUSFREQ too */
4006         intel_i2c_reset(dev);
4007 }
4008
4009 static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv)
4010 {
4011         int cur_cdclk, vco;
4012         int divider;
4013
4014         vco = valleyview_get_vco(dev_priv);
4015
4016         mutex_lock(&dev_priv->dpio_lock);
4017         divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4018         mutex_unlock(&dev_priv->dpio_lock);
4019
4020         divider &= 0xf;
4021
4022         cur_cdclk = (vco << 1) / (divider + 1);
4023
4024         return cur_cdclk;
4025 }
4026
4027 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
4028                                  int max_pixclk)
4029 {
4030         int cur_cdclk;
4031
4032         cur_cdclk = valleyview_cur_cdclk(dev_priv);
4033
4034         /*
4035          * Really only a few cases to deal with, as only 4 CDclks are supported:
4036          *   200MHz
4037          *   267MHz
4038          *   320MHz
4039          *   400MHz
4040          * So we check to see whether we're above 90% of the lower bin and
4041          * adjust if needed.
4042          */
4043         if (max_pixclk > 288000) {
4044                 return 400;
4045         } else if (max_pixclk > 240000) {
4046                 return 320;
4047         } else
4048                 return 266;
4049         /* Looks like the 200MHz CDclk freq doesn't work on some configs */
4050 }
4051
4052 static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv,
4053                                  unsigned modeset_pipes,
4054                                  struct intel_crtc_config *pipe_config)
4055 {
4056         struct drm_device *dev = dev_priv->dev;
4057         struct intel_crtc *intel_crtc;
4058         int max_pixclk = 0;
4059
4060         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4061                             base.head) {
4062                 if (modeset_pipes & (1 << intel_crtc->pipe))
4063                         max_pixclk = max(max_pixclk,
4064                                          pipe_config->adjusted_mode.crtc_clock);
4065                 else if (intel_crtc->base.enabled)
4066                         max_pixclk = max(max_pixclk,
4067                                          intel_crtc->config.adjusted_mode.crtc_clock);
4068         }
4069
4070         return max_pixclk;
4071 }
4072
4073 static void valleyview_modeset_global_pipes(struct drm_device *dev,
4074                                             unsigned *prepare_pipes,
4075                                             unsigned modeset_pipes,
4076                                             struct intel_crtc_config *pipe_config)
4077 {
4078         struct drm_i915_private *dev_priv = dev->dev_private;
4079         struct intel_crtc *intel_crtc;
4080         int max_pixclk = intel_mode_max_pixclk(dev_priv, modeset_pipes,
4081                                                pipe_config);
4082         int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4083
4084         if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk)
4085                 return;
4086
4087         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4088                             base.head)
4089                 if (intel_crtc->base.enabled)
4090                         *prepare_pipes |= (1 << intel_crtc->pipe);
4091 }
4092
4093 static void valleyview_modeset_global_resources(struct drm_device *dev)
4094 {
4095         struct drm_i915_private *dev_priv = dev->dev_private;
4096         int max_pixclk = intel_mode_max_pixclk(dev_priv, 0, NULL);
4097         int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4098         int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
4099
4100         if (req_cdclk != cur_cdclk)
4101                 valleyview_set_cdclk(dev, req_cdclk);
4102 }
4103
4104 static void valleyview_crtc_enable(struct drm_crtc *crtc)
4105 {
4106         struct drm_device *dev = crtc->dev;
4107         struct drm_i915_private *dev_priv = dev->dev_private;
4108         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4109         struct intel_encoder *encoder;
4110         int pipe = intel_crtc->pipe;
4111         int plane = intel_crtc->plane;
4112         bool is_dsi;
4113
4114         WARN_ON(!crtc->enabled);
4115
4116         if (intel_crtc->active)
4117                 return;
4118
4119         intel_crtc->active = true;
4120
4121         for_each_encoder_on_crtc(dev, crtc, encoder)
4122                 if (encoder->pre_pll_enable)
4123                         encoder->pre_pll_enable(encoder);
4124
4125         is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
4126
4127         if (!is_dsi)
4128                 vlv_enable_pll(intel_crtc);
4129
4130         for_each_encoder_on_crtc(dev, crtc, encoder)
4131                 if (encoder->pre_enable)
4132                         encoder->pre_enable(encoder);
4133
4134         i9xx_pfit_enable(intel_crtc);
4135
4136         intel_crtc_load_lut(crtc);
4137
4138         intel_update_watermarks(crtc);
4139         intel_enable_pipe(dev_priv, pipe, false, is_dsi);
4140         intel_enable_primary_plane(dev_priv, plane, pipe);
4141         intel_enable_planes(crtc);
4142         intel_crtc_update_cursor(crtc, true);
4143
4144         intel_update_fbc(dev);
4145
4146         for_each_encoder_on_crtc(dev, crtc, encoder)
4147                 encoder->enable(encoder);
4148 }
4149
4150 static void i9xx_crtc_enable(struct drm_crtc *crtc)
4151 {
4152         struct drm_device *dev = crtc->dev;
4153         struct drm_i915_private *dev_priv = dev->dev_private;
4154         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4155         struct intel_encoder *encoder;
4156         int pipe = intel_crtc->pipe;
4157         int plane = intel_crtc->plane;
4158
4159         WARN_ON(!crtc->enabled);
4160
4161         if (intel_crtc->active)
4162                 return;
4163
4164         intel_crtc->active = true;
4165
4166         for_each_encoder_on_crtc(dev, crtc, encoder)
4167                 if (encoder->pre_enable)
4168                         encoder->pre_enable(encoder);
4169
4170         i9xx_enable_pll(intel_crtc);
4171
4172         i9xx_pfit_enable(intel_crtc);
4173
4174         intel_crtc_load_lut(crtc);
4175
4176         intel_update_watermarks(crtc);
4177         intel_enable_pipe(dev_priv, pipe, false, false);
4178         intel_enable_primary_plane(dev_priv, plane, pipe);
4179         intel_enable_planes(crtc);
4180         /* The fixup needs to happen before cursor is enabled */
4181         if (IS_G4X(dev))
4182                 g4x_fixup_plane(dev_priv, pipe);
4183         intel_crtc_update_cursor(crtc, true);
4184
4185         /* Give the overlay scaler a chance to enable if it's on this pipe */
4186         intel_crtc_dpms_overlay(intel_crtc, true);
4187
4188         intel_update_fbc(dev);
4189
4190         for_each_encoder_on_crtc(dev, crtc, encoder)
4191                 encoder->enable(encoder);
4192 }
4193
4194 static void i9xx_pfit_disable(struct intel_crtc *crtc)
4195 {
4196         struct drm_device *dev = crtc->base.dev;
4197         struct drm_i915_private *dev_priv = dev->dev_private;
4198
4199         if (!crtc->config.gmch_pfit.control)
4200                 return;
4201
4202         assert_pipe_disabled(dev_priv, crtc->pipe);
4203
4204         DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
4205                          I915_READ(PFIT_CONTROL));
4206         I915_WRITE(PFIT_CONTROL, 0);
4207 }
4208
4209 static void i9xx_crtc_disable(struct drm_crtc *crtc)
4210 {
4211         struct drm_device *dev = crtc->dev;
4212         struct drm_i915_private *dev_priv = dev->dev_private;
4213         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4214         struct intel_encoder *encoder;
4215         int pipe = intel_crtc->pipe;
4216         int plane = intel_crtc->plane;
4217
4218         if (!intel_crtc->active)
4219                 return;
4220
4221         for_each_encoder_on_crtc(dev, crtc, encoder)
4222                 encoder->disable(encoder);
4223
4224         /* Give the overlay scaler a chance to disable if it's on this pipe */
4225         intel_crtc_wait_for_pending_flips(crtc);
4226         drm_vblank_off(dev, pipe);
4227
4228         if (dev_priv->fbc.plane == plane)
4229                 intel_disable_fbc(dev);
4230
4231         intel_crtc_dpms_overlay(intel_crtc, false);
4232         intel_crtc_update_cursor(crtc, false);
4233         intel_disable_planes(crtc);
4234         intel_disable_primary_plane(dev_priv, plane, pipe);
4235
4236         intel_disable_pipe(dev_priv, pipe);
4237
4238         i9xx_pfit_disable(intel_crtc);
4239
4240         for_each_encoder_on_crtc(dev, crtc, encoder)
4241                 if (encoder->post_disable)
4242                         encoder->post_disable(encoder);
4243
4244         if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
4245                 vlv_disable_pll(dev_priv, pipe);
4246         else if (!IS_VALLEYVIEW(dev))
4247                 i9xx_disable_pll(dev_priv, pipe);
4248
4249         intel_crtc->active = false;
4250         intel_update_watermarks(crtc);
4251
4252         intel_update_fbc(dev);
4253 }
4254
4255 static void i9xx_crtc_off(struct drm_crtc *crtc)
4256 {
4257 }
4258
4259 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
4260                                     bool enabled)
4261 {
4262         struct drm_device *dev = crtc->dev;
4263         struct drm_i915_master_private *master_priv;
4264         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4265         int pipe = intel_crtc->pipe;
4266
4267         if (!dev->primary->master)
4268                 return;
4269
4270         master_priv = dev->primary->master->driver_priv;
4271         if (!master_priv->sarea_priv)
4272                 return;
4273
4274         switch (pipe) {
4275         case 0:
4276                 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
4277                 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
4278                 break;
4279         case 1:
4280                 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
4281                 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
4282                 break;
4283         default:
4284                 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
4285                 break;
4286         }
4287 }
4288
4289 /**
4290  * Sets the power management mode of the pipe and plane.
4291  */
4292 void intel_crtc_update_dpms(struct drm_crtc *crtc)
4293 {
4294         struct drm_device *dev = crtc->dev;
4295         struct drm_i915_private *dev_priv = dev->dev_private;
4296         struct intel_encoder *intel_encoder;
4297         bool enable = false;
4298
4299         for_each_encoder_on_crtc(dev, crtc, intel_encoder)
4300                 enable |= intel_encoder->connectors_active;
4301
4302         if (enable)
4303                 dev_priv->display.crtc_enable(crtc);
4304         else
4305                 dev_priv->display.crtc_disable(crtc);
4306
4307         intel_crtc_update_sarea(crtc, enable);
4308 }
4309
4310 static void intel_crtc_disable(struct drm_crtc *crtc)
4311 {
4312         struct drm_device *dev = crtc->dev;
4313         struct drm_connector *connector;
4314         struct drm_i915_private *dev_priv = dev->dev_private;
4315         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4316
4317         /* crtc should still be enabled when we disable it. */
4318         WARN_ON(!crtc->enabled);
4319
4320         dev_priv->display.crtc_disable(crtc);
4321         intel_crtc->eld_vld = false;
4322         intel_crtc_update_sarea(crtc, false);
4323         dev_priv->display.off(crtc);
4324
4325         assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
4326         assert_cursor_disabled(dev_priv, to_intel_crtc(crtc)->pipe);
4327         assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
4328
4329         if (crtc->fb) {
4330                 mutex_lock(&dev->struct_mutex);
4331                 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
4332                 mutex_unlock(&dev->struct_mutex);
4333                 crtc->fb = NULL;
4334         }
4335
4336         /* Update computed state. */
4337         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
4338                 if (!connector->encoder || !connector->encoder->crtc)
4339                         continue;
4340
4341                 if (connector->encoder->crtc != crtc)
4342                         continue;
4343
4344                 connector->dpms = DRM_MODE_DPMS_OFF;
4345                 to_intel_encoder(connector->encoder)->connectors_active = false;
4346         }
4347 }
4348
4349 void intel_encoder_destroy(struct drm_encoder *encoder)
4350 {
4351         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
4352
4353         drm_encoder_cleanup(encoder);
4354         kfree(intel_encoder);
4355 }
4356
4357 /* Simple dpms helper for encoders with just one connector, no cloning and only
4358  * one kind of off state. It clamps all !ON modes to fully OFF and changes the
4359  * state of the entire output pipe. */
4360 static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
4361 {
4362         if (mode == DRM_MODE_DPMS_ON) {
4363                 encoder->connectors_active = true;
4364
4365                 intel_crtc_update_dpms(encoder->base.crtc);
4366         } else {
4367                 encoder->connectors_active = false;
4368
4369                 intel_crtc_update_dpms(encoder->base.crtc);
4370         }
4371 }
4372
4373 /* Cross check the actual hw state with our own modeset state tracking (and it's
4374  * internal consistency). */
4375 static void intel_connector_check_state(struct intel_connector *connector)
4376 {
4377         if (connector->get_hw_state(connector)) {
4378                 struct intel_encoder *encoder = connector->encoder;
4379                 struct drm_crtc *crtc;
4380                 bool encoder_enabled;
4381                 enum pipe pipe;
4382
4383                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4384                               connector->base.base.id,
4385                               drm_get_connector_name(&connector->base));
4386
4387                 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
4388                      "wrong connector dpms state\n");
4389                 WARN(connector->base.encoder != &encoder->base,
4390                      "active connector not linked to encoder\n");
4391                 WARN(!encoder->connectors_active,
4392                      "encoder->connectors_active not set\n");
4393
4394                 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
4395                 WARN(!encoder_enabled, "encoder not enabled\n");
4396                 if (WARN_ON(!encoder->base.crtc))
4397                         return;
4398
4399                 crtc = encoder->base.crtc;
4400
4401                 WARN(!crtc->enabled, "crtc not enabled\n");
4402                 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
4403                 WARN(pipe != to_intel_crtc(crtc)->pipe,
4404                      "encoder active on the wrong pipe\n");
4405         }
4406 }
4407
4408 /* Even simpler default implementation, if there's really no special case to
4409  * consider. */
4410 void intel_connector_dpms(struct drm_connector *connector, int mode)
4411 {
4412         /* All the simple cases only support two dpms states. */
4413         if (mode != DRM_MODE_DPMS_ON)
4414                 mode = DRM_MODE_DPMS_OFF;
4415
4416         if (mode == connector->dpms)
4417                 return;
4418
4419         connector->dpms = mode;
4420
4421         /* Only need to change hw state when actually enabled */
4422         if (connector->encoder)
4423                 intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
4424
4425         intel_modeset_check_state(connector->dev);
4426 }
4427
4428 /* Simple connector->get_hw_state implementation for encoders that support only
4429  * one connector and no cloning and hence the encoder state determines the state
4430  * of the connector. */
4431 bool intel_connector_get_hw_state(struct intel_connector *connector)
4432 {
4433         enum pipe pipe = 0;
4434         struct intel_encoder *encoder = connector->encoder;
4435
4436         return encoder->get_hw_state(encoder, &pipe);
4437 }
4438
4439 static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
4440                                      struct intel_crtc_config *pipe_config)
4441 {
4442         struct drm_i915_private *dev_priv = dev->dev_private;
4443         struct intel_crtc *pipe_B_crtc =
4444                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
4445
4446         DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
4447                       pipe_name(pipe), pipe_config->fdi_lanes);
4448         if (pipe_config->fdi_lanes > 4) {
4449                 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
4450                               pipe_name(pipe), pipe_config->fdi_lanes);
4451                 return false;
4452         }
4453
4454         if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
4455                 if (pipe_config->fdi_lanes > 2) {
4456                         DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
4457                                       pipe_config->fdi_lanes);
4458                         return false;
4459                 } else {
4460                         return true;
4461                 }
4462         }
4463
4464         if (INTEL_INFO(dev)->num_pipes == 2)
4465                 return true;
4466
4467         /* Ivybridge 3 pipe is really complicated */
4468         switch (pipe) {
4469         case PIPE_A:
4470                 return true;
4471         case PIPE_B:
4472                 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
4473                     pipe_config->fdi_lanes > 2) {
4474                         DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4475                                       pipe_name(pipe), pipe_config->fdi_lanes);
4476                         return false;
4477                 }
4478                 return true;
4479         case PIPE_C:
4480                 if (!pipe_has_enabled_pch(pipe_B_crtc) ||
4481                     pipe_B_crtc->config.fdi_lanes <= 2) {
4482                         if (pipe_config->fdi_lanes > 2) {
4483                                 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4484                                               pipe_name(pipe), pipe_config->fdi_lanes);
4485                                 return false;
4486                         }
4487                 } else {
4488                         DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
4489                         return false;
4490                 }
4491                 return true;
4492         default:
4493                 BUG();
4494         }
4495 }
4496
4497 #define RETRY 1
4498 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
4499                                        struct intel_crtc_config *pipe_config)
4500 {
4501         struct drm_device *dev = intel_crtc->base.dev;
4502         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4503         int lane, link_bw, fdi_dotclock;
4504         bool setup_ok, needs_recompute = false;
4505
4506 retry:
4507         /* FDI is a binary signal running at ~2.7GHz, encoding
4508          * each output octet as 10 bits. The actual frequency
4509          * is stored as a divider into a 100MHz clock, and the
4510          * mode pixel clock is stored in units of 1KHz.
4511          * Hence the bw of each lane in terms of the mode signal
4512          * is:
4513          */
4514         link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4515
4516         fdi_dotclock = adjusted_mode->crtc_clock;
4517
4518         lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
4519                                            pipe_config->pipe_bpp);
4520
4521         pipe_config->fdi_lanes = lane;
4522
4523         intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
4524                                link_bw, &pipe_config->fdi_m_n);
4525
4526         setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
4527                                             intel_crtc->pipe, pipe_config);
4528         if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
4529                 pipe_config->pipe_bpp -= 2*3;
4530                 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
4531                               pipe_config->pipe_bpp);
4532                 needs_recompute = true;
4533                 pipe_config->bw_constrained = true;
4534
4535                 goto retry;
4536         }
4537
4538         if (needs_recompute)
4539                 return RETRY;
4540
4541         return setup_ok ? 0 : -EINVAL;
4542 }
4543
4544 static void hsw_compute_ips_config(struct intel_crtc *crtc,
4545                                    struct intel_crtc_config *pipe_config)
4546 {
4547         pipe_config->ips_enabled = i915_enable_ips &&
4548                                    hsw_crtc_supports_ips(crtc) &&
4549                                    pipe_config->pipe_bpp <= 24;
4550 }
4551
4552 static int intel_crtc_compute_config(struct intel_crtc *crtc,
4553                                      struct intel_crtc_config *pipe_config)
4554 {
4555         struct drm_device *dev = crtc->base.dev;
4556         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4557
4558         /* FIXME should check pixel clock limits on all platforms */
4559         if (INTEL_INFO(dev)->gen < 4) {
4560                 struct drm_i915_private *dev_priv = dev->dev_private;
4561                 int clock_limit =
4562                         dev_priv->display.get_display_clock_speed(dev);
4563
4564                 /*
4565                  * Enable pixel doubling when the dot clock
4566                  * is > 90% of the (display) core speed.
4567                  *
4568                  * GDG double wide on either pipe,
4569                  * otherwise pipe A only.
4570                  */
4571                 if ((crtc->pipe == PIPE_A || IS_I915G(dev)) &&
4572                     adjusted_mode->crtc_clock > clock_limit * 9 / 10) {
4573                         clock_limit *= 2;
4574                         pipe_config->double_wide = true;
4575                 }
4576
4577                 if (adjusted_mode->crtc_clock > clock_limit * 9 / 10)
4578                         return -EINVAL;
4579         }
4580
4581         /*
4582          * Pipe horizontal size must be even in:
4583          * - DVO ganged mode
4584          * - LVDS dual channel mode
4585          * - Double wide pipe
4586          */
4587         if ((intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4588              intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
4589                 pipe_config->pipe_src_w &= ~1;
4590
4591         /* Cantiga+ cannot handle modes with a hsync front porch of 0.
4592          * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
4593          */
4594         if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
4595                 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
4596                 return -EINVAL;
4597
4598         if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
4599                 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
4600         } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
4601                 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
4602                  * for lvds. */
4603                 pipe_config->pipe_bpp = 8*3;
4604         }
4605
4606         if (HAS_IPS(dev))
4607                 hsw_compute_ips_config(crtc, pipe_config);
4608
4609         /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old
4610          * clock survives for now. */
4611         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
4612                 pipe_config->shared_dpll = crtc->config.shared_dpll;
4613
4614         if (pipe_config->has_pch_encoder)
4615                 return ironlake_fdi_compute_config(crtc, pipe_config);
4616
4617         return 0;
4618 }
4619
4620 static int valleyview_get_display_clock_speed(struct drm_device *dev)
4621 {
4622         return 400000; /* FIXME */
4623 }
4624
4625 static int i945_get_display_clock_speed(struct drm_device *dev)
4626 {
4627         return 400000;
4628 }
4629
4630 static int i915_get_display_clock_speed(struct drm_device *dev)
4631 {
4632         return 333000;
4633 }
4634
4635 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4636 {
4637         return 200000;
4638 }
4639
4640 static int pnv_get_display_clock_speed(struct drm_device *dev)
4641 {
4642         u16 gcfgc = 0;
4643
4644         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4645
4646         switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4647         case GC_DISPLAY_CLOCK_267_MHZ_PNV:
4648                 return 267000;
4649         case GC_DISPLAY_CLOCK_333_MHZ_PNV:
4650                 return 333000;
4651         case GC_DISPLAY_CLOCK_444_MHZ_PNV:
4652                 return 444000;
4653         case GC_DISPLAY_CLOCK_200_MHZ_PNV:
4654                 return 200000;
4655         default:
4656                 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
4657         case GC_DISPLAY_CLOCK_133_MHZ_PNV:
4658                 return 133000;
4659         case GC_DISPLAY_CLOCK_167_MHZ_PNV:
4660                 return 167000;
4661         }
4662 }
4663
4664 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4665 {
4666         u16 gcfgc = 0;
4667
4668         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4669
4670         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4671                 return 133000;
4672         else {
4673                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4674                 case GC_DISPLAY_CLOCK_333_MHZ:
4675                         return 333000;
4676                 default:
4677                 case GC_DISPLAY_CLOCK_190_200_MHZ:
4678                         return 190000;
4679                 }
4680         }
4681 }
4682
4683 static int i865_get_display_clock_speed(struct drm_device *dev)
4684 {
4685         return 266000;
4686 }
4687
4688 static int i855_get_display_clock_speed(struct drm_device *dev)
4689 {
4690         u16 hpllcc = 0;
4691         /* Assume that the hardware is in the high speed state.  This
4692          * should be the default.
4693          */
4694         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4695         case GC_CLOCK_133_200:
4696         case GC_CLOCK_100_200:
4697                 return 200000;
4698         case GC_CLOCK_166_250:
4699                 return 250000;
4700         case GC_CLOCK_100_133:
4701                 return 133000;
4702         }
4703
4704         /* Shouldn't happen */
4705         return 0;
4706 }
4707
4708 static int i830_get_display_clock_speed(struct drm_device *dev)
4709 {
4710         return 133000;
4711 }
4712
4713 static void
4714 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
4715 {
4716         while (*num > DATA_LINK_M_N_MASK ||
4717                *den > DATA_LINK_M_N_MASK) {
4718                 *num >>= 1;
4719                 *den >>= 1;
4720         }
4721 }
4722
4723 static void compute_m_n(unsigned int m, unsigned int n,
4724                         uint32_t *ret_m, uint32_t *ret_n)
4725 {
4726         *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
4727         *ret_m = div_u64((uint64_t) m * *ret_n, n);
4728         intel_reduce_m_n_ratio(ret_m, ret_n);
4729 }
4730
4731 void
4732 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4733                        int pixel_clock, int link_clock,
4734                        struct intel_link_m_n *m_n)
4735 {
4736         m_n->tu = 64;
4737
4738         compute_m_n(bits_per_pixel * pixel_clock,
4739                     link_clock * nlanes * 8,
4740                     &m_n->gmch_m, &m_n->gmch_n);
4741
4742         compute_m_n(pixel_clock, link_clock,
4743                     &m_n->link_m, &m_n->link_n);
4744 }
4745
4746 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4747 {
4748         if (i915_panel_use_ssc >= 0)
4749                 return i915_panel_use_ssc != 0;
4750         return dev_priv->vbt.lvds_use_ssc
4751                 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4752 }
4753
4754 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4755 {
4756         struct drm_device *dev = crtc->dev;
4757         struct drm_i915_private *dev_priv = dev->dev_private;
4758         int refclk;
4759
4760         if (IS_VALLEYVIEW(dev)) {
4761                 refclk = 100000;
4762         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4763             intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4764                 refclk = dev_priv->vbt.lvds_ssc_freq * 1000;
4765                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4766                               refclk / 1000);
4767         } else if (!IS_GEN2(dev)) {
4768                 refclk = 96000;
4769         } else {
4770                 refclk = 48000;
4771         }
4772
4773         return refclk;
4774 }
4775
4776 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
4777 {
4778         return (1 << dpll->n) << 16 | dpll->m2;
4779 }
4780
4781 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
4782 {
4783         return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
4784 }
4785
4786 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
4787                                      intel_clock_t *reduced_clock)
4788 {
4789         struct drm_device *dev = crtc->base.dev;
4790         struct drm_i915_private *dev_priv = dev->dev_private;
4791         int pipe = crtc->pipe;
4792         u32 fp, fp2 = 0;
4793
4794         if (IS_PINEVIEW(dev)) {
4795                 fp = pnv_dpll_compute_fp(&crtc->config.dpll);
4796                 if (reduced_clock)
4797                         fp2 = pnv_dpll_compute_fp(reduced_clock);
4798         } else {
4799                 fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
4800                 if (reduced_clock)
4801                         fp2 = i9xx_dpll_compute_fp(reduced_clock);
4802         }
4803
4804         I915_WRITE(FP0(pipe), fp);
4805         crtc->config.dpll_hw_state.fp0 = fp;
4806
4807         crtc->lowfreq_avail = false;
4808         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4809             reduced_clock && i915_powersave) {
4810                 I915_WRITE(FP1(pipe), fp2);
4811                 crtc->config.dpll_hw_state.fp1 = fp2;
4812                 crtc->lowfreq_avail = true;
4813         } else {
4814                 I915_WRITE(FP1(pipe), fp);
4815                 crtc->config.dpll_hw_state.fp1 = fp;
4816         }
4817 }
4818
4819 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
4820                 pipe)
4821 {
4822         u32 reg_val;
4823
4824         /*
4825          * PLLB opamp always calibrates to max value of 0x3f, force enable it
4826          * and set it to a reasonable value instead.
4827          */
4828         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
4829         reg_val &= 0xffffff00;
4830         reg_val |= 0x00000030;
4831         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
4832
4833         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
4834         reg_val &= 0x8cffffff;
4835         reg_val = 0x8c000000;
4836         vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
4837
4838         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
4839         reg_val &= 0xffffff00;
4840         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
4841
4842         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
4843         reg_val &= 0x00ffffff;
4844         reg_val |= 0xb0000000;
4845         vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
4846 }
4847
4848 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
4849                                          struct intel_link_m_n *m_n)
4850 {
4851         struct drm_device *dev = crtc->base.dev;
4852         struct drm_i915_private *dev_priv = dev->dev_private;
4853         int pipe = crtc->pipe;
4854
4855         I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4856         I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
4857         I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
4858         I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
4859 }
4860
4861 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
4862                                          struct intel_link_m_n *m_n)
4863 {
4864         struct drm_device *dev = crtc->base.dev;
4865         struct drm_i915_private *dev_priv = dev->dev_private;
4866         int pipe = crtc->pipe;
4867         enum transcoder transcoder = crtc->config.cpu_transcoder;
4868
4869         if (INTEL_INFO(dev)->gen >= 5) {
4870                 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
4871                 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
4872                 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
4873                 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
4874         } else {
4875                 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4876                 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
4877                 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
4878                 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
4879         }
4880 }
4881
4882 static void intel_dp_set_m_n(struct intel_crtc *crtc)
4883 {
4884         if (crtc->config.has_pch_encoder)
4885                 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4886         else
4887                 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4888 }
4889
4890 static void vlv_update_pll(struct intel_crtc *crtc)
4891 {
4892         struct drm_device *dev = crtc->base.dev;
4893         struct drm_i915_private *dev_priv = dev->dev_private;
4894         int pipe = crtc->pipe;
4895         u32 dpll, mdiv;
4896         u32 bestn, bestm1, bestm2, bestp1, bestp2;
4897         u32 coreclk, reg_val, dpll_md;
4898
4899         mutex_lock(&dev_priv->dpio_lock);
4900
4901         bestn = crtc->config.dpll.n;
4902         bestm1 = crtc->config.dpll.m1;
4903         bestm2 = crtc->config.dpll.m2;
4904         bestp1 = crtc->config.dpll.p1;
4905         bestp2 = crtc->config.dpll.p2;
4906
4907         /* See eDP HDMI DPIO driver vbios notes doc */
4908
4909         /* PLL B needs special handling */
4910         if (pipe)
4911                 vlv_pllb_recal_opamp(dev_priv, pipe);
4912
4913         /* Set up Tx target for periodic Rcomp update */
4914         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
4915
4916         /* Disable target IRef on PLL */
4917         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
4918         reg_val &= 0x00ffffff;
4919         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
4920
4921         /* Disable fast lock */
4922         vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
4923
4924         /* Set idtafcrecal before PLL is enabled */
4925         mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4926         mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4927         mdiv |= ((bestn << DPIO_N_SHIFT));
4928         mdiv |= (1 << DPIO_K_SHIFT);
4929
4930         /*
4931          * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
4932          * but we don't support that).
4933          * Note: don't use the DAC post divider as it seems unstable.
4934          */
4935         mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
4936         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
4937
4938         mdiv |= DPIO_ENABLE_CALIBRATION;
4939         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
4940
4941         /* Set HBR and RBR LPF coefficients */
4942         if (crtc->config.port_clock == 162000 ||
4943             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
4944             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
4945                 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
4946                                  0x009f0003);
4947         else
4948                 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
4949                                  0x00d0000f);
4950
4951         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
4952             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
4953                 /* Use SSC source */
4954                 if (!pipe)
4955                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4956                                          0x0df40000);
4957                 else
4958                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4959                                          0x0df70000);
4960         } else { /* HDMI or VGA */
4961                 /* Use bend source */
4962                 if (!pipe)
4963                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4964                                          0x0df70000);
4965                 else
4966                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4967                                          0x0df40000);
4968         }
4969
4970         coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
4971         coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
4972         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
4973             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
4974                 coreclk |= 0x01000000;
4975         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
4976
4977         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
4978
4979         /* Enable DPIO clock input */
4980         dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
4981                 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
4982         /* We should never disable this, set it here for state tracking */
4983         if (pipe == PIPE_B)
4984                 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
4985         dpll |= DPLL_VCO_ENABLE;
4986         crtc->config.dpll_hw_state.dpll = dpll;
4987
4988         dpll_md = (crtc->config.pixel_multiplier - 1)
4989                 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4990         crtc->config.dpll_hw_state.dpll_md = dpll_md;
4991
4992         if (crtc->config.has_dp_encoder)
4993                 intel_dp_set_m_n(crtc);
4994
4995         mutex_unlock(&dev_priv->dpio_lock);
4996 }
4997
4998 static void i9xx_update_pll(struct intel_crtc *crtc,
4999                             intel_clock_t *reduced_clock,
5000                             int num_connectors)
5001 {
5002         struct drm_device *dev = crtc->base.dev;
5003         struct drm_i915_private *dev_priv = dev->dev_private;
5004         u32 dpll;
5005         bool is_sdvo;
5006         struct dpll *clock = &crtc->config.dpll;
5007
5008         i9xx_update_pll_dividers(crtc, reduced_clock);
5009
5010         is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
5011                 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
5012
5013         dpll = DPLL_VGA_MODE_DIS;
5014
5015         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
5016                 dpll |= DPLLB_MODE_LVDS;
5017         else
5018                 dpll |= DPLLB_MODE_DAC_SERIAL;
5019
5020         if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5021                 dpll |= (crtc->config.pixel_multiplier - 1)
5022                         << SDVO_MULTIPLIER_SHIFT_HIRES;
5023         }
5024
5025         if (is_sdvo)
5026                 dpll |= DPLL_SDVO_HIGH_SPEED;
5027
5028         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
5029                 dpll |= DPLL_SDVO_HIGH_SPEED;
5030
5031         /* compute bitmask from p1 value */
5032         if (IS_PINEVIEW(dev))
5033                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
5034         else {
5035                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5036                 if (IS_G4X(dev) && reduced_clock)
5037                         dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5038         }
5039         switch (clock->p2) {
5040         case 5:
5041                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5042                 break;
5043         case 7:
5044                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5045                 break;
5046         case 10:
5047                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5048                 break;
5049         case 14:
5050                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5051                 break;
5052         }
5053         if (INTEL_INFO(dev)->gen >= 4)
5054                 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
5055
5056         if (crtc->config.sdvo_tv_clock)
5057                 dpll |= PLL_REF_INPUT_TVCLKINBC;
5058         else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5059                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5060                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5061         else
5062                 dpll |= PLL_REF_INPUT_DREFCLK;
5063
5064         dpll |= DPLL_VCO_ENABLE;
5065         crtc->config.dpll_hw_state.dpll = dpll;
5066
5067         if (INTEL_INFO(dev)->gen >= 4) {
5068                 u32 dpll_md = (crtc->config.pixel_multiplier - 1)
5069                         << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5070                 crtc->config.dpll_hw_state.dpll_md = dpll_md;
5071         }
5072
5073         if (crtc->config.has_dp_encoder)
5074                 intel_dp_set_m_n(crtc);
5075 }
5076
5077 static void i8xx_update_pll(struct intel_crtc *crtc,
5078                             intel_clock_t *reduced_clock,
5079                             int num_connectors)
5080 {
5081         struct drm_device *dev = crtc->base.dev;
5082         struct drm_i915_private *dev_priv = dev->dev_private;
5083         u32 dpll;
5084         struct dpll *clock = &crtc->config.dpll;
5085
5086         i9xx_update_pll_dividers(crtc, reduced_clock);
5087
5088         dpll = DPLL_VGA_MODE_DIS;
5089
5090         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
5091                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5092         } else {
5093                 if (clock->p1 == 2)
5094                         dpll |= PLL_P1_DIVIDE_BY_TWO;
5095                 else
5096                         dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5097                 if (clock->p2 == 4)
5098                         dpll |= PLL_P2_DIVIDE_BY_4;
5099         }
5100
5101         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
5102                 dpll |= DPLL_DVO_2X_MODE;
5103
5104         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5105                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5106                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5107         else
5108                 dpll |= PLL_REF_INPUT_DREFCLK;
5109
5110         dpll |= DPLL_VCO_ENABLE;
5111         crtc->config.dpll_hw_state.dpll = dpll;
5112 }
5113
5114 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
5115 {
5116         struct drm_device *dev = intel_crtc->base.dev;
5117         struct drm_i915_private *dev_priv = dev->dev_private;
5118         enum pipe pipe = intel_crtc->pipe;
5119         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
5120         struct drm_display_mode *adjusted_mode =
5121                 &intel_crtc->config.adjusted_mode;
5122         uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end;
5123
5124         /* We need to be careful not to changed the adjusted mode, for otherwise
5125          * the hw state checker will get angry at the mismatch. */
5126         crtc_vtotal = adjusted_mode->crtc_vtotal;
5127         crtc_vblank_end = adjusted_mode->crtc_vblank_end;
5128
5129         if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5130                 /* the chip adds 2 halflines automatically */
5131                 crtc_vtotal -= 1;
5132                 crtc_vblank_end -= 1;
5133                 vsyncshift = adjusted_mode->crtc_hsync_start
5134                              - adjusted_mode->crtc_htotal / 2;
5135         } else {
5136                 vsyncshift = 0;
5137         }
5138
5139         if (INTEL_INFO(dev)->gen > 3)
5140                 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
5141
5142         I915_WRITE(HTOTAL(cpu_transcoder),
5143                    (adjusted_mode->crtc_hdisplay - 1) |
5144                    ((adjusted_mode->crtc_htotal - 1) << 16));
5145         I915_WRITE(HBLANK(cpu_transcoder),
5146                    (adjusted_mode->crtc_hblank_start - 1) |
5147                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
5148         I915_WRITE(HSYNC(cpu_transcoder),
5149                    (adjusted_mode->crtc_hsync_start - 1) |
5150                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
5151
5152         I915_WRITE(VTOTAL(cpu_transcoder),
5153                    (adjusted_mode->crtc_vdisplay - 1) |
5154                    ((crtc_vtotal - 1) << 16));
5155         I915_WRITE(VBLANK(cpu_transcoder),
5156                    (adjusted_mode->crtc_vblank_start - 1) |
5157                    ((crtc_vblank_end - 1) << 16));
5158         I915_WRITE(VSYNC(cpu_transcoder),
5159                    (adjusted_mode->crtc_vsync_start - 1) |
5160                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
5161
5162         /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
5163          * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
5164          * documented on the DDI_FUNC_CTL register description, EDP Input Select
5165          * bits. */
5166         if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
5167             (pipe == PIPE_B || pipe == PIPE_C))
5168                 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
5169
5170         /* pipesrc controls the size that is scaled from, which should
5171          * always be the user's requested size.
5172          */
5173         I915_WRITE(PIPESRC(pipe),
5174                    ((intel_crtc->config.pipe_src_w - 1) << 16) |
5175                    (intel_crtc->config.pipe_src_h - 1));
5176 }
5177
5178 static void intel_get_pipe_timings(struct intel_crtc *crtc,
5179                                    struct intel_crtc_config *pipe_config)
5180 {
5181         struct drm_device *dev = crtc->base.dev;
5182         struct drm_i915_private *dev_priv = dev->dev_private;
5183         enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
5184         uint32_t tmp;
5185
5186         tmp = I915_READ(HTOTAL(cpu_transcoder));
5187         pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
5188         pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
5189         tmp = I915_READ(HBLANK(cpu_transcoder));
5190         pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
5191         pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
5192         tmp = I915_READ(HSYNC(cpu_transcoder));
5193         pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
5194         pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
5195
5196         tmp = I915_READ(VTOTAL(cpu_transcoder));
5197         pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
5198         pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
5199         tmp = I915_READ(VBLANK(cpu_transcoder));
5200         pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
5201         pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
5202         tmp = I915_READ(VSYNC(cpu_transcoder));
5203         pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
5204         pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
5205
5206         if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
5207                 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
5208                 pipe_config->adjusted_mode.crtc_vtotal += 1;
5209                 pipe_config->adjusted_mode.crtc_vblank_end += 1;
5210         }
5211
5212         tmp = I915_READ(PIPESRC(crtc->pipe));
5213         pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
5214         pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
5215
5216         pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h;
5217         pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w;
5218 }
5219
5220 static void intel_crtc_mode_from_pipe_config(struct intel_crtc *intel_crtc,
5221                                              struct intel_crtc_config *pipe_config)
5222 {
5223         struct drm_crtc *crtc = &intel_crtc->base;
5224
5225         crtc->mode.hdisplay = pipe_config->adjusted_mode.crtc_hdisplay;
5226         crtc->mode.htotal = pipe_config->adjusted_mode.crtc_htotal;
5227         crtc->mode.hsync_start = pipe_config->adjusted_mode.crtc_hsync_start;
5228         crtc->mode.hsync_end = pipe_config->adjusted_mode.crtc_hsync_end;
5229
5230         crtc->mode.vdisplay = pipe_config->adjusted_mode.crtc_vdisplay;
5231         crtc->mode.vtotal = pipe_config->adjusted_mode.crtc_vtotal;
5232         crtc->mode.vsync_start = pipe_config->adjusted_mode.crtc_vsync_start;
5233         crtc->mode.vsync_end = pipe_config->adjusted_mode.crtc_vsync_end;
5234
5235         crtc->mode.flags = pipe_config->adjusted_mode.flags;
5236
5237         crtc->mode.clock = pipe_config->adjusted_mode.crtc_clock;
5238         crtc->mode.flags |= pipe_config->adjusted_mode.flags;
5239 }
5240
5241 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
5242 {
5243         struct drm_device *dev = intel_crtc->base.dev;
5244         struct drm_i915_private *dev_priv = dev->dev_private;
5245         uint32_t pipeconf;
5246
5247         pipeconf = 0;
5248
5249         if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
5250             I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
5251                 pipeconf |= PIPECONF_ENABLE;
5252
5253         if (intel_crtc->config.double_wide)
5254                 pipeconf |= PIPECONF_DOUBLE_WIDE;
5255
5256         /* only g4x and later have fancy bpc/dither controls */
5257         if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5258                 /* Bspec claims that we can't use dithering for 30bpp pipes. */
5259                 if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
5260                         pipeconf |= PIPECONF_DITHER_EN |
5261                                     PIPECONF_DITHER_TYPE_SP;
5262
5263                 switch (intel_crtc->config.pipe_bpp) {
5264                 case 18:
5265                         pipeconf |= PIPECONF_6BPC;
5266                         break;
5267                 case 24:
5268                         pipeconf |= PIPECONF_8BPC;
5269                         break;
5270                 case 30:
5271                         pipeconf |= PIPECONF_10BPC;
5272                         break;
5273                 default:
5274                         /* Case prevented by intel_choose_pipe_bpp_dither. */
5275                         BUG();
5276                 }
5277         }
5278
5279         if (HAS_PIPE_CXSR(dev)) {
5280                 if (intel_crtc->lowfreq_avail) {
5281                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
5282                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
5283                 } else {
5284                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
5285                 }
5286         }
5287
5288         if (!IS_GEN2(dev) &&
5289             intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5290                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
5291         else
5292                 pipeconf |= PIPECONF_PROGRESSIVE;
5293
5294         if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range)
5295                 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
5296
5297         I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
5298         POSTING_READ(PIPECONF(intel_crtc->pipe));
5299 }
5300
5301 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
5302                               int x, int y,
5303                               struct drm_framebuffer *fb)
5304 {
5305         struct drm_device *dev = crtc->dev;
5306         struct drm_i915_private *dev_priv = dev->dev_private;
5307         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5308         int pipe = intel_crtc->pipe;
5309         int plane = intel_crtc->plane;
5310         int refclk, num_connectors = 0;
5311         intel_clock_t clock, reduced_clock;
5312         u32 dspcntr;
5313         bool ok, has_reduced_clock = false;
5314         bool is_lvds = false, is_dsi = false;
5315         struct intel_encoder *encoder;
5316         const intel_limit_t *limit;
5317         int ret;
5318
5319         for_each_encoder_on_crtc(dev, crtc, encoder) {
5320                 switch (encoder->type) {
5321                 case INTEL_OUTPUT_LVDS:
5322                         is_lvds = true;
5323                         break;
5324                 case INTEL_OUTPUT_DSI:
5325                         is_dsi = true;
5326                         break;
5327                 }
5328
5329                 num_connectors++;
5330         }
5331
5332         if (is_dsi)
5333                 goto skip_dpll;
5334
5335         if (!intel_crtc->config.clock_set) {
5336                 refclk = i9xx_get_refclk(crtc, num_connectors);
5337
5338                 /*
5339                  * Returns a set of divisors for the desired target clock with
5340                  * the given refclk, or FALSE.  The returned values represent
5341                  * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
5342                  * 2) / p1 / p2.
5343                  */
5344                 limit = intel_limit(crtc, refclk);
5345                 ok = dev_priv->display.find_dpll(limit, crtc,
5346                                                  intel_crtc->config.port_clock,
5347                                                  refclk, NULL, &clock);
5348                 if (!ok) {
5349                         DRM_ERROR("Couldn't find PLL settings for mode!\n");
5350                         return -EINVAL;
5351                 }
5352
5353                 if (is_lvds && dev_priv->lvds_downclock_avail) {
5354                         /*
5355                          * Ensure we match the reduced clock's P to the target
5356                          * clock.  If the clocks don't match, we can't switch
5357                          * the display clock by using the FP0/FP1. In such case
5358                          * we will disable the LVDS downclock feature.
5359                          */
5360                         has_reduced_clock =
5361                                 dev_priv->display.find_dpll(limit, crtc,
5362                                                             dev_priv->lvds_downclock,
5363                                                             refclk, &clock,
5364                                                             &reduced_clock);
5365                 }
5366                 /* Compat-code for transition, will disappear. */
5367                 intel_crtc->config.dpll.n = clock.n;
5368                 intel_crtc->config.dpll.m1 = clock.m1;
5369                 intel_crtc->config.dpll.m2 = clock.m2;
5370                 intel_crtc->config.dpll.p1 = clock.p1;
5371                 intel_crtc->config.dpll.p2 = clock.p2;
5372         }
5373
5374         if (IS_GEN2(dev)) {
5375                 i8xx_update_pll(intel_crtc,
5376                                 has_reduced_clock ? &reduced_clock : NULL,
5377                                 num_connectors);
5378         } else if (IS_VALLEYVIEW(dev)) {
5379                 vlv_update_pll(intel_crtc);
5380         } else {
5381                 i9xx_update_pll(intel_crtc,
5382                                 has_reduced_clock ? &reduced_clock : NULL,
5383                                 num_connectors);
5384         }
5385
5386 skip_dpll:
5387         /* Set up the display plane register */
5388         dspcntr = DISPPLANE_GAMMA_ENABLE;
5389
5390         if (!IS_VALLEYVIEW(dev)) {
5391                 if (pipe == 0)
5392                         dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
5393                 else
5394                         dspcntr |= DISPPLANE_SEL_PIPE_B;
5395         }
5396
5397         intel_set_pipe_timings(intel_crtc);
5398
5399         /* pipesrc and dspsize control the size that is scaled from,
5400          * which should always be the user's requested size.
5401          */
5402         I915_WRITE(DSPSIZE(plane),
5403                    ((intel_crtc->config.pipe_src_h - 1) << 16) |
5404                    (intel_crtc->config.pipe_src_w - 1));
5405         I915_WRITE(DSPPOS(plane), 0);
5406
5407         i9xx_set_pipeconf(intel_crtc);
5408
5409         I915_WRITE(DSPCNTR(plane), dspcntr);
5410         POSTING_READ(DSPCNTR(plane));
5411
5412         ret = intel_pipe_set_base(crtc, x, y, fb);
5413
5414         return ret;
5415 }
5416
5417 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
5418                                  struct intel_crtc_config *pipe_config)
5419 {
5420         struct drm_device *dev = crtc->base.dev;
5421         struct drm_i915_private *dev_priv = dev->dev_private;
5422         uint32_t tmp;
5423
5424         tmp = I915_READ(PFIT_CONTROL);
5425         if (!(tmp & PFIT_ENABLE))
5426                 return;
5427
5428         /* Check whether the pfit is attached to our pipe. */
5429         if (INTEL_INFO(dev)->gen < 4) {
5430                 if (crtc->pipe != PIPE_B)
5431                         return;
5432         } else {
5433                 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
5434                         return;
5435         }
5436
5437         pipe_config->gmch_pfit.control = tmp;
5438         pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
5439         if (INTEL_INFO(dev)->gen < 5)
5440                 pipe_config->gmch_pfit.lvds_border_bits =
5441                         I915_READ(LVDS) & LVDS_BORDER_ENABLE;
5442 }
5443
5444 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
5445                                struct intel_crtc_config *pipe_config)
5446 {
5447         struct drm_device *dev = crtc->base.dev;
5448         struct drm_i915_private *dev_priv = dev->dev_private;
5449         int pipe = pipe_config->cpu_transcoder;
5450         intel_clock_t clock;
5451         u32 mdiv;
5452         int refclk = 100000;
5453
5454         mutex_lock(&dev_priv->dpio_lock);
5455         mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
5456         mutex_unlock(&dev_priv->dpio_lock);
5457
5458         clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
5459         clock.m2 = mdiv & DPIO_M2DIV_MASK;
5460         clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
5461         clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
5462         clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
5463
5464         vlv_clock(refclk, &clock);
5465
5466         /* clock.dot is the fast clock */
5467         pipe_config->port_clock = clock.dot / 5;
5468 }
5469
5470 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
5471                                  struct intel_crtc_config *pipe_config)
5472 {
5473         struct drm_device *dev = crtc->base.dev;
5474         struct drm_i915_private *dev_priv = dev->dev_private;
5475         uint32_t tmp;
5476
5477         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
5478         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
5479
5480         tmp = I915_READ(PIPECONF(crtc->pipe));
5481         if (!(tmp & PIPECONF_ENABLE))
5482                 return false;
5483
5484         if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5485                 switch (tmp & PIPECONF_BPC_MASK) {
5486                 case PIPECONF_6BPC:
5487                         pipe_config->pipe_bpp = 18;
5488                         break;
5489                 case PIPECONF_8BPC:
5490                         pipe_config->pipe_bpp = 24;
5491                         break;
5492                 case PIPECONF_10BPC:
5493                         pipe_config->pipe_bpp = 30;
5494                         break;
5495                 default:
5496                         break;
5497                 }
5498         }
5499
5500         if (INTEL_INFO(dev)->gen < 4)
5501                 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
5502
5503         intel_get_pipe_timings(crtc, pipe_config);
5504
5505         i9xx_get_pfit_config(crtc, pipe_config);
5506
5507         if (INTEL_INFO(dev)->gen >= 4) {
5508                 tmp = I915_READ(DPLL_MD(crtc->pipe));
5509                 pipe_config->pixel_multiplier =
5510                         ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
5511                          >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
5512                 pipe_config->dpll_hw_state.dpll_md = tmp;
5513         } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5514                 tmp = I915_READ(DPLL(crtc->pipe));
5515                 pipe_config->pixel_multiplier =
5516                         ((tmp & SDVO_MULTIPLIER_MASK)
5517                          >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
5518         } else {
5519                 /* Note that on i915G/GM the pixel multiplier is in the sdvo
5520                  * port and will be fixed up in the encoder->get_config
5521                  * function. */
5522                 pipe_config->pixel_multiplier = 1;
5523         }
5524         pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
5525         if (!IS_VALLEYVIEW(dev)) {
5526                 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
5527                 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
5528         } else {
5529                 /* Mask out read-only status bits. */
5530                 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
5531                                                      DPLL_PORTC_READY_MASK |
5532                                                      DPLL_PORTB_READY_MASK);
5533         }
5534
5535         if (IS_VALLEYVIEW(dev))
5536                 vlv_crtc_clock_get(crtc, pipe_config);
5537         else
5538                 i9xx_crtc_clock_get(crtc, pipe_config);
5539
5540         return true;
5541 }
5542
5543 static void ironlake_init_pch_refclk(struct drm_device *dev)
5544 {
5545         struct drm_i915_private *dev_priv = dev->dev_private;
5546         struct drm_mode_config *mode_config = &dev->mode_config;
5547         struct intel_encoder *encoder;
5548         u32 val, final;
5549         bool has_lvds = false;
5550         bool has_cpu_edp = false;
5551         bool has_panel = false;
5552         bool has_ck505 = false;
5553         bool can_ssc = false;
5554
5555         /* We need to take the global config into account */
5556         list_for_each_entry(encoder, &mode_config->encoder_list,
5557                             base.head) {
5558                 switch (encoder->type) {
5559                 case INTEL_OUTPUT_LVDS:
5560                         has_panel = true;
5561                         has_lvds = true;
5562                         break;
5563                 case INTEL_OUTPUT_EDP:
5564                         has_panel = true;
5565                         if (enc_to_dig_port(&encoder->base)->port == PORT_A)
5566                                 has_cpu_edp = true;
5567                         break;
5568                 }
5569         }
5570
5571         if (HAS_PCH_IBX(dev)) {
5572                 has_ck505 = dev_priv->vbt.display_clock_mode;
5573                 can_ssc = has_ck505;
5574         } else {
5575                 has_ck505 = false;
5576                 can_ssc = true;
5577         }
5578
5579         DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
5580                       has_panel, has_lvds, has_ck505);
5581
5582         /* Ironlake: try to setup display ref clock before DPLL
5583          * enabling. This is only under driver's control after
5584          * PCH B stepping, previous chipset stepping should be
5585          * ignoring this setting.
5586          */
5587         val = I915_READ(PCH_DREF_CONTROL);
5588
5589         /* As we must carefully and slowly disable/enable each source in turn,
5590          * compute the final state we want first and check if we need to
5591          * make any changes at all.
5592          */
5593         final = val;
5594         final &= ~DREF_NONSPREAD_SOURCE_MASK;
5595         if (has_ck505)
5596                 final |= DREF_NONSPREAD_CK505_ENABLE;
5597         else
5598                 final |= DREF_NONSPREAD_SOURCE_ENABLE;
5599
5600         final &= ~DREF_SSC_SOURCE_MASK;
5601         final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5602         final &= ~DREF_SSC1_ENABLE;
5603
5604         if (has_panel) {
5605                 final |= DREF_SSC_SOURCE_ENABLE;
5606
5607                 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5608                         final |= DREF_SSC1_ENABLE;
5609
5610                 if (has_cpu_edp) {
5611                         if (intel_panel_use_ssc(dev_priv) && can_ssc)
5612                                 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5613                         else
5614                                 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5615                 } else
5616                         final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5617         } else {
5618                 final |= DREF_SSC_SOURCE_DISABLE;
5619                 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5620         }
5621
5622         if (final == val)
5623                 return;
5624
5625         /* Always enable nonspread source */
5626         val &= ~DREF_NONSPREAD_SOURCE_MASK;
5627
5628         if (has_ck505)
5629                 val |= DREF_NONSPREAD_CK505_ENABLE;
5630         else
5631                 val |= DREF_NONSPREAD_SOURCE_ENABLE;
5632
5633         if (has_panel) {
5634                 val &= ~DREF_SSC_SOURCE_MASK;
5635                 val |= DREF_SSC_SOURCE_ENABLE;
5636
5637                 /* SSC must be turned on before enabling the CPU output  */
5638                 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5639                         DRM_DEBUG_KMS("Using SSC on panel\n");
5640                         val |= DREF_SSC1_ENABLE;
5641                 } else
5642                         val &= ~DREF_SSC1_ENABLE;
5643
5644                 /* Get SSC going before enabling the outputs */
5645                 I915_WRITE(PCH_DREF_CONTROL, val);
5646                 POSTING_READ(PCH_DREF_CONTROL);
5647                 udelay(200);
5648
5649                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5650
5651                 /* Enable CPU source on CPU attached eDP */
5652                 if (has_cpu_edp) {
5653                         if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5654                                 DRM_DEBUG_KMS("Using SSC on eDP\n");
5655                                 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5656                         }
5657                         else
5658                                 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5659                 } else
5660                         val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5661
5662                 I915_WRITE(PCH_DREF_CONTROL, val);
5663                 POSTING_READ(PCH_DREF_CONTROL);
5664                 udelay(200);
5665         } else {
5666                 DRM_DEBUG_KMS("Disabling SSC entirely\n");
5667
5668                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5669
5670                 /* Turn off CPU output */
5671                 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5672
5673                 I915_WRITE(PCH_DREF_CONTROL, val);
5674                 POSTING_READ(PCH_DREF_CONTROL);
5675                 udelay(200);
5676
5677                 /* Turn off the SSC source */
5678                 val &= ~DREF_SSC_SOURCE_MASK;
5679                 val |= DREF_SSC_SOURCE_DISABLE;
5680
5681                 /* Turn off SSC1 */
5682                 val &= ~DREF_SSC1_ENABLE;
5683
5684                 I915_WRITE(PCH_DREF_CONTROL, val);
5685                 POSTING_READ(PCH_DREF_CONTROL);
5686                 udelay(200);
5687         }
5688
5689         BUG_ON(val != final);
5690 }
5691
5692 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
5693 {
5694         uint32_t tmp;
5695
5696         tmp = I915_READ(SOUTH_CHICKEN2);
5697         tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
5698         I915_WRITE(SOUTH_CHICKEN2, tmp);
5699
5700         if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
5701                                FDI_MPHY_IOSFSB_RESET_STATUS, 100))
5702                 DRM_ERROR("FDI mPHY reset assert timeout\n");
5703
5704         tmp = I915_READ(SOUTH_CHICKEN2);
5705         tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
5706         I915_WRITE(SOUTH_CHICKEN2, tmp);
5707
5708         if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
5709                                 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
5710                 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
5711 }
5712
5713 /* WaMPhyProgramming:hsw */
5714 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
5715 {
5716         uint32_t tmp;
5717
5718         tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
5719         tmp &= ~(0xFF << 24);
5720         tmp |= (0x12 << 24);
5721         intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
5722
5723         tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
5724         tmp |= (1 << 11);
5725         intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
5726
5727         tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
5728         tmp |= (1 << 11);
5729         intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
5730
5731         tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
5732         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5733         intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
5734
5735         tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
5736         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5737         intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
5738
5739         tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
5740         tmp &= ~(7 << 13);
5741         tmp |= (5 << 13);
5742         intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
5743
5744         tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
5745         tmp &= ~(7 << 13);
5746         tmp |= (5 << 13);
5747         intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
5748
5749         tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
5750         tmp &= ~0xFF;
5751         tmp |= 0x1C;
5752         intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
5753
5754         tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
5755         tmp &= ~0xFF;
5756         tmp |= 0x1C;
5757         intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
5758
5759         tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
5760         tmp &= ~(0xFF << 16);
5761         tmp |= (0x1C << 16);
5762         intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
5763
5764         tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
5765         tmp &= ~(0xFF << 16);
5766         tmp |= (0x1C << 16);
5767         intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
5768
5769         tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
5770         tmp |= (1 << 27);
5771         intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
5772
5773         tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
5774         tmp |= (1 << 27);
5775         intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
5776
5777         tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
5778         tmp &= ~(0xF << 28);
5779         tmp |= (4 << 28);
5780         intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
5781
5782         tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
5783         tmp &= ~(0xF << 28);
5784         tmp |= (4 << 28);
5785         intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
5786 }
5787
5788 /* Implements 3 different sequences from BSpec chapter "Display iCLK
5789  * Programming" based on the parameters passed:
5790  * - Sequence to enable CLKOUT_DP
5791  * - Sequence to enable CLKOUT_DP without spread
5792  * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
5793  */
5794 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
5795                                  bool with_fdi)
5796 {
5797         struct drm_i915_private *dev_priv = dev->dev_private;
5798         uint32_t reg, tmp;
5799
5800         if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
5801                 with_spread = true;
5802         if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
5803                  with_fdi, "LP PCH doesn't have FDI\n"))
5804                 with_fdi = false;
5805
5806         mutex_lock(&dev_priv->dpio_lock);
5807
5808         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5809         tmp &= ~SBI_SSCCTL_DISABLE;
5810         tmp |= SBI_SSCCTL_PATHALT;
5811         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5812
5813         udelay(24);
5814
5815         if (with_spread) {
5816                 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5817                 tmp &= ~SBI_SSCCTL_PATHALT;
5818                 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5819
5820                 if (with_fdi) {
5821                         lpt_reset_fdi_mphy(dev_priv);
5822                         lpt_program_fdi_mphy(dev_priv);
5823                 }
5824         }
5825
5826         reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
5827                SBI_GEN0 : SBI_DBUFF0;
5828         tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
5829         tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
5830         intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
5831
5832         mutex_unlock(&dev_priv->dpio_lock);
5833 }
5834
5835 /* Sequence to disable CLKOUT_DP */
5836 static void lpt_disable_clkout_dp(struct drm_device *dev)
5837 {
5838         struct drm_i915_private *dev_priv = dev->dev_private;
5839         uint32_t reg, tmp;
5840
5841         mutex_lock(&dev_priv->dpio_lock);
5842
5843         reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
5844                SBI_GEN0 : SBI_DBUFF0;
5845         tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
5846         tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
5847         intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
5848
5849         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5850         if (!(tmp & SBI_SSCCTL_DISABLE)) {
5851                 if (!(tmp & SBI_SSCCTL_PATHALT)) {
5852                         tmp |= SBI_SSCCTL_PATHALT;
5853                         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5854                         udelay(32);
5855                 }
5856                 tmp |= SBI_SSCCTL_DISABLE;
5857                 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5858         }
5859
5860         mutex_unlock(&dev_priv->dpio_lock);
5861 }
5862
5863 static void lpt_init_pch_refclk(struct drm_device *dev)
5864 {
5865         struct drm_mode_config *mode_config = &dev->mode_config;
5866         struct intel_encoder *encoder;
5867         bool has_vga = false;
5868
5869         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5870                 switch (encoder->type) {
5871                 case INTEL_OUTPUT_ANALOG:
5872                         has_vga = true;
5873                         break;
5874                 }
5875         }
5876
5877         if (has_vga)
5878                 lpt_enable_clkout_dp(dev, true, true);
5879         else
5880                 lpt_disable_clkout_dp(dev);
5881 }
5882
5883 /*
5884  * Initialize reference clocks when the driver loads
5885  */
5886 void intel_init_pch_refclk(struct drm_device *dev)
5887 {
5888         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5889                 ironlake_init_pch_refclk(dev);
5890         else if (HAS_PCH_LPT(dev))
5891                 lpt_init_pch_refclk(dev);
5892 }
5893
5894 static int ironlake_get_refclk(struct drm_crtc *crtc)
5895 {
5896         struct drm_device *dev = crtc->dev;
5897         struct drm_i915_private *dev_priv = dev->dev_private;
5898         struct intel_encoder *encoder;
5899         int num_connectors = 0;
5900         bool is_lvds = false;
5901
5902         for_each_encoder_on_crtc(dev, crtc, encoder) {
5903                 switch (encoder->type) {
5904                 case INTEL_OUTPUT_LVDS:
5905                         is_lvds = true;
5906                         break;
5907                 }
5908                 num_connectors++;
5909         }
5910
5911         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5912                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5913                               dev_priv->vbt.lvds_ssc_freq);
5914                 return dev_priv->vbt.lvds_ssc_freq * 1000;
5915         }
5916
5917         return 120000;
5918 }
5919
5920 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
5921 {
5922         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5923         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5924         int pipe = intel_crtc->pipe;
5925         uint32_t val;
5926
5927         val = 0;
5928
5929         switch (intel_crtc->config.pipe_bpp) {
5930         case 18:
5931                 val |= PIPECONF_6BPC;
5932                 break;
5933         case 24:
5934                 val |= PIPECONF_8BPC;
5935                 break;
5936         case 30:
5937                 val |= PIPECONF_10BPC;
5938                 break;
5939         case 36:
5940                 val |= PIPECONF_12BPC;
5941                 break;
5942         default:
5943                 /* Case prevented by intel_choose_pipe_bpp_dither. */
5944                 BUG();
5945         }
5946
5947         if (intel_crtc->config.dither)
5948                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5949
5950         if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5951                 val |= PIPECONF_INTERLACED_ILK;
5952         else
5953                 val |= PIPECONF_PROGRESSIVE;
5954
5955         if (intel_crtc->config.limited_color_range)
5956                 val |= PIPECONF_COLOR_RANGE_SELECT;
5957
5958         I915_WRITE(PIPECONF(pipe), val);
5959         POSTING_READ(PIPECONF(pipe));
5960 }
5961
5962 /*
5963  * Set up the pipe CSC unit.
5964  *
5965  * Currently only full range RGB to limited range RGB conversion
5966  * is supported, but eventually this should handle various
5967  * RGB<->YCbCr scenarios as well.
5968  */
5969 static void intel_set_pipe_csc(struct drm_crtc *crtc)
5970 {
5971         struct drm_device *dev = crtc->dev;
5972         struct drm_i915_private *dev_priv = dev->dev_private;
5973         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5974         int pipe = intel_crtc->pipe;
5975         uint16_t coeff = 0x7800; /* 1.0 */
5976
5977         /*
5978          * TODO: Check what kind of values actually come out of the pipe
5979          * with these coeff/postoff values and adjust to get the best
5980          * accuracy. Perhaps we even need to take the bpc value into
5981          * consideration.
5982          */
5983
5984         if (intel_crtc->config.limited_color_range)
5985                 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
5986
5987         /*
5988          * GY/GU and RY/RU should be the other way around according
5989          * to BSpec, but reality doesn't agree. Just set them up in
5990          * a way that results in the correct picture.
5991          */
5992         I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
5993         I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
5994
5995         I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
5996         I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
5997
5998         I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
5999         I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
6000
6001         I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
6002         I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
6003         I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
6004
6005         if (INTEL_INFO(dev)->gen > 6) {
6006                 uint16_t postoff = 0;
6007
6008                 if (intel_crtc->config.limited_color_range)
6009                         postoff = (16 * (1 << 13) / 255) & 0x1fff;
6010
6011                 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
6012                 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
6013                 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
6014
6015                 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
6016         } else {
6017                 uint32_t mode = CSC_MODE_YUV_TO_RGB;
6018
6019                 if (intel_crtc->config.limited_color_range)
6020                         mode |= CSC_BLACK_SCREEN_OFFSET;
6021
6022                 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
6023         }
6024 }
6025
6026 static void haswell_set_pipeconf(struct drm_crtc *crtc)
6027 {
6028         struct drm_device *dev = crtc->dev;
6029         struct drm_i915_private *dev_priv = dev->dev_private;
6030         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6031         enum pipe pipe = intel_crtc->pipe;
6032         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6033         uint32_t val;
6034
6035         val = 0;
6036
6037         if (IS_HASWELL(dev) && intel_crtc->config.dither)
6038                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
6039
6040         if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
6041                 val |= PIPECONF_INTERLACED_ILK;
6042         else
6043                 val |= PIPECONF_PROGRESSIVE;
6044
6045         I915_WRITE(PIPECONF(cpu_transcoder), val);
6046         POSTING_READ(PIPECONF(cpu_transcoder));
6047
6048         I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
6049         POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
6050
6051         if (IS_BROADWELL(dev)) {
6052                 val = 0;
6053
6054                 switch (intel_crtc->config.pipe_bpp) {
6055                 case 18:
6056                         val |= PIPEMISC_DITHER_6_BPC;
6057                         break;
6058                 case 24:
6059                         val |= PIPEMISC_DITHER_8_BPC;
6060                         break;
6061                 case 30:
6062                         val |= PIPEMISC_DITHER_10_BPC;
6063                         break;
6064                 case 36:
6065                         val |= PIPEMISC_DITHER_12_BPC;
6066                         break;
6067                 default:
6068                         /* Case prevented by pipe_config_set_bpp. */
6069                         BUG();
6070                 }
6071
6072                 if (intel_crtc->config.dither)
6073                         val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
6074
6075                 I915_WRITE(PIPEMISC(pipe), val);
6076         }
6077 }
6078
6079 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
6080                                     intel_clock_t *clock,
6081                                     bool *has_reduced_clock,
6082                                     intel_clock_t *reduced_clock)
6083 {
6084         struct drm_device *dev = crtc->dev;
6085         struct drm_i915_private *dev_priv = dev->dev_private;
6086         struct intel_encoder *intel_encoder;
6087         int refclk;
6088         const intel_limit_t *limit;
6089         bool ret, is_lvds = false;
6090
6091         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6092                 switch (intel_encoder->type) {
6093                 case INTEL_OUTPUT_LVDS:
6094                         is_lvds = true;
6095                         break;
6096                 }
6097         }
6098
6099         refclk = ironlake_get_refclk(crtc);
6100
6101         /*
6102          * Returns a set of divisors for the desired target clock with the given
6103          * refclk, or FALSE.  The returned values represent the clock equation:
6104          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
6105          */
6106         limit = intel_limit(crtc, refclk);
6107         ret = dev_priv->display.find_dpll(limit, crtc,
6108                                           to_intel_crtc(crtc)->config.port_clock,
6109                                           refclk, NULL, clock);
6110         if (!ret)
6111                 return false;
6112
6113         if (is_lvds && dev_priv->lvds_downclock_avail) {
6114                 /*
6115                  * Ensure we match the reduced clock's P to the target clock.
6116                  * If the clocks don't match, we can't switch the display clock
6117                  * by using the FP0/FP1. In such case we will disable the LVDS
6118                  * downclock feature.
6119                 */
6120                 *has_reduced_clock =
6121                         dev_priv->display.find_dpll(limit, crtc,
6122                                                     dev_priv->lvds_downclock,
6123                                                     refclk, clock,
6124                                                     reduced_clock);
6125         }
6126
6127         return true;
6128 }
6129
6130 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
6131 {
6132         /*
6133          * Account for spread spectrum to avoid
6134          * oversubscribing the link. Max center spread
6135          * is 2.5%; use 5% for safety's sake.
6136          */
6137         u32 bps = target_clock * bpp * 21 / 20;
6138         return bps / (link_bw * 8) + 1;
6139 }
6140
6141 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
6142 {
6143         return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
6144 }
6145
6146 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
6147                                       u32 *fp,
6148                                       intel_clock_t *reduced_clock, u32 *fp2)
6149 {
6150         struct drm_crtc *crtc = &intel_crtc->base;
6151         struct drm_device *dev = crtc->dev;
6152         struct drm_i915_private *dev_priv = dev->dev_private;
6153         struct intel_encoder *intel_encoder;
6154         uint32_t dpll;
6155         int factor, num_connectors = 0;
6156         bool is_lvds = false, is_sdvo = false;
6157
6158         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6159                 switch (intel_encoder->type) {
6160                 case INTEL_OUTPUT_LVDS:
6161                         is_lvds = true;
6162                         break;
6163                 case INTEL_OUTPUT_SDVO:
6164                 case INTEL_OUTPUT_HDMI:
6165                         is_sdvo = true;
6166                         break;
6167                 }
6168
6169                 num_connectors++;
6170         }
6171
6172         /* Enable autotuning of the PLL clock (if permissible) */
6173         factor = 21;
6174         if (is_lvds) {
6175                 if ((intel_panel_use_ssc(dev_priv) &&
6176                      dev_priv->vbt.lvds_ssc_freq == 100) ||
6177                     (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
6178                         factor = 25;
6179         } else if (intel_crtc->config.sdvo_tv_clock)
6180                 factor = 20;
6181
6182         if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
6183                 *fp |= FP_CB_TUNE;
6184
6185         if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
6186                 *fp2 |= FP_CB_TUNE;
6187
6188         dpll = 0;
6189
6190         if (is_lvds)
6191                 dpll |= DPLLB_MODE_LVDS;
6192         else
6193                 dpll |= DPLLB_MODE_DAC_SERIAL;
6194
6195         dpll |= (intel_crtc->config.pixel_multiplier - 1)
6196                 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
6197
6198         if (is_sdvo)
6199                 dpll |= DPLL_SDVO_HIGH_SPEED;
6200         if (intel_crtc->config.has_dp_encoder)
6201                 dpll |= DPLL_SDVO_HIGH_SPEED;
6202
6203         /* compute bitmask from p1 value */
6204         dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6205         /* also FPA1 */
6206         dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
6207
6208         switch (intel_crtc->config.dpll.p2) {
6209         case 5:
6210                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
6211                 break;
6212         case 7:
6213                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
6214                 break;
6215         case 10:
6216                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
6217                 break;
6218         case 14:
6219                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
6220                 break;
6221         }
6222
6223         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
6224                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6225         else
6226                 dpll |= PLL_REF_INPUT_DREFCLK;
6227
6228         return dpll | DPLL_VCO_ENABLE;
6229 }
6230
6231 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
6232                                   int x, int y,
6233                                   struct drm_framebuffer *fb)
6234 {
6235         struct drm_device *dev = crtc->dev;
6236         struct drm_i915_private *dev_priv = dev->dev_private;
6237         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6238         int pipe = intel_crtc->pipe;
6239         int plane = intel_crtc->plane;
6240         int num_connectors = 0;
6241         intel_clock_t clock, reduced_clock;
6242         u32 dpll = 0, fp = 0, fp2 = 0;
6243         bool ok, has_reduced_clock = false;
6244         bool is_lvds = false;
6245         struct intel_encoder *encoder;
6246         struct intel_shared_dpll *pll;
6247         int ret;
6248
6249         for_each_encoder_on_crtc(dev, crtc, encoder) {
6250                 switch (encoder->type) {
6251                 case INTEL_OUTPUT_LVDS:
6252                         is_lvds = true;
6253                         break;
6254                 }
6255
6256                 num_connectors++;
6257         }
6258
6259         WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
6260              "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
6261
6262         ok = ironlake_compute_clocks(crtc, &clock,
6263                                      &has_reduced_clock, &reduced_clock);
6264         if (!ok && !intel_crtc->config.clock_set) {
6265                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
6266                 return -EINVAL;
6267         }
6268         /* Compat-code for transition, will disappear. */
6269         if (!intel_crtc->config.clock_set) {
6270                 intel_crtc->config.dpll.n = clock.n;
6271                 intel_crtc->config.dpll.m1 = clock.m1;
6272                 intel_crtc->config.dpll.m2 = clock.m2;
6273                 intel_crtc->config.dpll.p1 = clock.p1;
6274                 intel_crtc->config.dpll.p2 = clock.p2;
6275         }
6276
6277         /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
6278         if (intel_crtc->config.has_pch_encoder) {
6279                 fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
6280                 if (has_reduced_clock)
6281                         fp2 = i9xx_dpll_compute_fp(&reduced_clock);
6282
6283                 dpll = ironlake_compute_dpll(intel_crtc,
6284                                              &fp, &reduced_clock,
6285                                              has_reduced_clock ? &fp2 : NULL);
6286
6287                 intel_crtc->config.dpll_hw_state.dpll = dpll;
6288                 intel_crtc->config.dpll_hw_state.fp0 = fp;
6289                 if (has_reduced_clock)
6290                         intel_crtc->config.dpll_hw_state.fp1 = fp2;
6291                 else
6292                         intel_crtc->config.dpll_hw_state.fp1 = fp;
6293
6294                 pll = intel_get_shared_dpll(intel_crtc);
6295                 if (pll == NULL) {
6296                         DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
6297                                          pipe_name(pipe));
6298                         return -EINVAL;
6299                 }
6300         } else
6301                 intel_put_shared_dpll(intel_crtc);
6302
6303         if (intel_crtc->config.has_dp_encoder)
6304                 intel_dp_set_m_n(intel_crtc);
6305
6306         if (is_lvds && has_reduced_clock && i915_powersave)
6307                 intel_crtc->lowfreq_avail = true;
6308         else
6309                 intel_crtc->lowfreq_avail = false;
6310
6311         intel_set_pipe_timings(intel_crtc);
6312
6313         if (intel_crtc->config.has_pch_encoder) {
6314                 intel_cpu_transcoder_set_m_n(intel_crtc,
6315                                              &intel_crtc->config.fdi_m_n);
6316         }
6317
6318         ironlake_set_pipeconf(crtc);
6319
6320         /* Set up the display plane register */
6321         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
6322         POSTING_READ(DSPCNTR(plane));
6323
6324         ret = intel_pipe_set_base(crtc, x, y, fb);
6325
6326         return ret;
6327 }
6328
6329 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
6330                                          struct intel_link_m_n *m_n)
6331 {
6332         struct drm_device *dev = crtc->base.dev;
6333         struct drm_i915_private *dev_priv = dev->dev_private;
6334         enum pipe pipe = crtc->pipe;
6335
6336         m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
6337         m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
6338         m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
6339                 & ~TU_SIZE_MASK;
6340         m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
6341         m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
6342                     & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6343 }
6344
6345 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
6346                                          enum transcoder transcoder,
6347                                          struct intel_link_m_n *m_n)
6348 {
6349         struct drm_device *dev = crtc->base.dev;
6350         struct drm_i915_private *dev_priv = dev->dev_private;
6351         enum pipe pipe = crtc->pipe;
6352
6353         if (INTEL_INFO(dev)->gen >= 5) {
6354                 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
6355                 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
6356                 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
6357                         & ~TU_SIZE_MASK;
6358                 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
6359                 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
6360                             & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6361         } else {
6362                 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
6363                 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
6364                 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
6365                         & ~TU_SIZE_MASK;
6366                 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
6367                 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
6368                             & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6369         }
6370 }
6371
6372 void intel_dp_get_m_n(struct intel_crtc *crtc,
6373                       struct intel_crtc_config *pipe_config)
6374 {
6375         if (crtc->config.has_pch_encoder)
6376                 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
6377         else
6378                 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6379                                              &pipe_config->dp_m_n);
6380 }
6381
6382 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
6383                                         struct intel_crtc_config *pipe_config)
6384 {
6385         intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6386                                      &pipe_config->fdi_m_n);
6387 }
6388
6389 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
6390                                      struct intel_crtc_config *pipe_config)
6391 {
6392         struct drm_device *dev = crtc->base.dev;
6393         struct drm_i915_private *dev_priv = dev->dev_private;
6394         uint32_t tmp;
6395
6396         tmp = I915_READ(PF_CTL(crtc->pipe));
6397
6398         if (tmp & PF_ENABLE) {
6399                 pipe_config->pch_pfit.enabled = true;
6400                 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
6401                 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
6402
6403                 /* We currently do not free assignements of panel fitters on
6404                  * ivb/hsw (since we don't use the higher upscaling modes which
6405                  * differentiates them) so just WARN about this case for now. */
6406                 if (IS_GEN7(dev)) {
6407                         WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
6408                                 PF_PIPE_SEL_IVB(crtc->pipe));
6409                 }
6410         }
6411 }
6412
6413 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
6414                                      struct intel_crtc_config *pipe_config)
6415 {
6416         struct drm_device *dev = crtc->base.dev;
6417         struct drm_i915_private *dev_priv = dev->dev_private;
6418         uint32_t tmp;
6419
6420         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6421         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6422
6423         tmp = I915_READ(PIPECONF(crtc->pipe));
6424         if (!(tmp & PIPECONF_ENABLE))
6425                 return false;
6426
6427         switch (tmp & PIPECONF_BPC_MASK) {
6428         case PIPECONF_6BPC:
6429                 pipe_config->pipe_bpp = 18;
6430                 break;
6431         case PIPECONF_8BPC:
6432                 pipe_config->pipe_bpp = 24;
6433                 break;
6434         case PIPECONF_10BPC:
6435                 pipe_config->pipe_bpp = 30;
6436                 break;
6437         case PIPECONF_12BPC:
6438                 pipe_config->pipe_bpp = 36;
6439                 break;
6440         default:
6441                 break;
6442         }
6443
6444         if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
6445                 struct intel_shared_dpll *pll;
6446
6447                 pipe_config->has_pch_encoder = true;
6448
6449                 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
6450                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
6451                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
6452
6453                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
6454
6455                 if (HAS_PCH_IBX(dev_priv->dev)) {
6456                         pipe_config->shared_dpll =
6457                                 (enum intel_dpll_id) crtc->pipe;
6458                 } else {
6459                         tmp = I915_READ(PCH_DPLL_SEL);
6460                         if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
6461                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
6462                         else
6463                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
6464                 }
6465
6466                 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
6467
6468                 WARN_ON(!pll->get_hw_state(dev_priv, pll,
6469                                            &pipe_config->dpll_hw_state));
6470
6471                 tmp = pipe_config->dpll_hw_state.dpll;
6472                 pipe_config->pixel_multiplier =
6473                         ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
6474                          >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
6475
6476                 ironlake_pch_clock_get(crtc, pipe_config);
6477         } else {
6478                 pipe_config->pixel_multiplier = 1;
6479         }
6480
6481         intel_get_pipe_timings(crtc, pipe_config);
6482
6483         ironlake_get_pfit_config(crtc, pipe_config);
6484
6485         return true;
6486 }
6487
6488 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
6489 {
6490         struct drm_device *dev = dev_priv->dev;
6491         struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
6492         struct intel_crtc *crtc;
6493         unsigned long irqflags;
6494         uint32_t val;
6495
6496         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
6497                 WARN(crtc->active, "CRTC for pipe %c enabled\n",
6498                      pipe_name(crtc->pipe));
6499
6500         WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
6501         WARN(plls->spll_refcount, "SPLL enabled\n");
6502         WARN(plls->wrpll1_refcount, "WRPLL1 enabled\n");
6503         WARN(plls->wrpll2_refcount, "WRPLL2 enabled\n");
6504         WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
6505         WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
6506              "CPU PWM1 enabled\n");
6507         WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
6508              "CPU PWM2 enabled\n");
6509         WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
6510              "PCH PWM1 enabled\n");
6511         WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
6512              "Utility pin enabled\n");
6513         WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
6514
6515         spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
6516         val = I915_READ(DEIMR);
6517         WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff,
6518              "Unexpected DEIMR bits enabled: 0x%x\n", val);
6519         val = I915_READ(SDEIMR);
6520         WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff,
6521              "Unexpected SDEIMR bits enabled: 0x%x\n", val);
6522         spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
6523 }
6524
6525 /*
6526  * This function implements pieces of two sequences from BSpec:
6527  * - Sequence for display software to disable LCPLL
6528  * - Sequence for display software to allow package C8+
6529  * The steps implemented here are just the steps that actually touch the LCPLL
6530  * register. Callers should take care of disabling all the display engine
6531  * functions, doing the mode unset, fixing interrupts, etc.
6532  */
6533 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
6534                               bool switch_to_fclk, bool allow_power_down)
6535 {
6536         uint32_t val;
6537
6538         assert_can_disable_lcpll(dev_priv);
6539
6540         val = I915_READ(LCPLL_CTL);
6541
6542         if (switch_to_fclk) {
6543                 val |= LCPLL_CD_SOURCE_FCLK;
6544                 I915_WRITE(LCPLL_CTL, val);
6545
6546                 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
6547                                        LCPLL_CD_SOURCE_FCLK_DONE, 1))
6548                         DRM_ERROR("Switching to FCLK failed\n");
6549
6550                 val = I915_READ(LCPLL_CTL);
6551         }
6552
6553         val |= LCPLL_PLL_DISABLE;
6554         I915_WRITE(LCPLL_CTL, val);
6555         POSTING_READ(LCPLL_CTL);
6556
6557         if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
6558                 DRM_ERROR("LCPLL still locked\n");
6559
6560         val = I915_READ(D_COMP);
6561         val |= D_COMP_COMP_DISABLE;
6562         mutex_lock(&dev_priv->rps.hw_lock);
6563         if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
6564                 DRM_ERROR("Failed to disable D_COMP\n");
6565         mutex_unlock(&dev_priv->rps.hw_lock);
6566         POSTING_READ(D_COMP);
6567         ndelay(100);
6568
6569         if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1))
6570                 DRM_ERROR("D_COMP RCOMP still in progress\n");
6571
6572         if (allow_power_down) {
6573                 val = I915_READ(LCPLL_CTL);
6574                 val |= LCPLL_POWER_DOWN_ALLOW;
6575                 I915_WRITE(LCPLL_CTL, val);
6576                 POSTING_READ(LCPLL_CTL);
6577         }
6578 }
6579
6580 /*
6581  * Fully restores LCPLL, disallowing power down and switching back to LCPLL
6582  * source.
6583  */
6584 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
6585 {
6586         uint32_t val;
6587
6588         val = I915_READ(LCPLL_CTL);
6589
6590         if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
6591                     LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
6592                 return;
6593
6594         /* Make sure we're not on PC8 state before disabling PC8, otherwise
6595          * we'll hang the machine! */
6596         dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL);
6597
6598         if (val & LCPLL_POWER_DOWN_ALLOW) {
6599                 val &= ~LCPLL_POWER_DOWN_ALLOW;
6600                 I915_WRITE(LCPLL_CTL, val);
6601                 POSTING_READ(LCPLL_CTL);
6602         }
6603
6604         val = I915_READ(D_COMP);
6605         val |= D_COMP_COMP_FORCE;
6606         val &= ~D_COMP_COMP_DISABLE;
6607         mutex_lock(&dev_priv->rps.hw_lock);
6608         if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
6609                 DRM_ERROR("Failed to enable D_COMP\n");
6610         mutex_unlock(&dev_priv->rps.hw_lock);
6611         POSTING_READ(D_COMP);
6612
6613         val = I915_READ(LCPLL_CTL);
6614         val &= ~LCPLL_PLL_DISABLE;
6615         I915_WRITE(LCPLL_CTL, val);
6616
6617         if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
6618                 DRM_ERROR("LCPLL not locked yet\n");
6619
6620         if (val & LCPLL_CD_SOURCE_FCLK) {
6621                 val = I915_READ(LCPLL_CTL);
6622                 val &= ~LCPLL_CD_SOURCE_FCLK;
6623                 I915_WRITE(LCPLL_CTL, val);
6624
6625                 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
6626                                         LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
6627                         DRM_ERROR("Switching back to LCPLL failed\n");
6628         }
6629
6630         dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
6631 }
6632
6633 void hsw_enable_pc8_work(struct work_struct *__work)
6634 {
6635         struct drm_i915_private *dev_priv =
6636                 container_of(to_delayed_work(__work), struct drm_i915_private,
6637                              pc8.enable_work);
6638         struct drm_device *dev = dev_priv->dev;
6639         uint32_t val;
6640
6641         WARN_ON(!HAS_PC8(dev));
6642
6643         if (dev_priv->pc8.enabled)
6644                 return;
6645
6646         DRM_DEBUG_KMS("Enabling package C8+\n");
6647
6648         dev_priv->pc8.enabled = true;
6649
6650         if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
6651                 val = I915_READ(SOUTH_DSPCLK_GATE_D);
6652                 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
6653                 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
6654         }
6655
6656         lpt_disable_clkout_dp(dev);
6657         hsw_pc8_disable_interrupts(dev);
6658         hsw_disable_lcpll(dev_priv, true, true);
6659
6660         intel_runtime_pm_put(dev_priv);
6661 }
6662
6663 static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
6664 {
6665         WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
6666         WARN(dev_priv->pc8.disable_count < 1,
6667              "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
6668
6669         dev_priv->pc8.disable_count--;
6670         if (dev_priv->pc8.disable_count != 0)
6671                 return;
6672
6673         schedule_delayed_work(&dev_priv->pc8.enable_work,
6674                               msecs_to_jiffies(i915_pc8_timeout));
6675 }
6676
6677 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
6678 {
6679         struct drm_device *dev = dev_priv->dev;
6680         uint32_t val;
6681
6682         WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
6683         WARN(dev_priv->pc8.disable_count < 0,
6684              "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
6685
6686         dev_priv->pc8.disable_count++;
6687         if (dev_priv->pc8.disable_count != 1)
6688                 return;
6689
6690         WARN_ON(!HAS_PC8(dev));
6691
6692         cancel_delayed_work_sync(&dev_priv->pc8.enable_work);
6693         if (!dev_priv->pc8.enabled)
6694                 return;
6695
6696         DRM_DEBUG_KMS("Disabling package C8+\n");
6697
6698         intel_runtime_pm_get(dev_priv);
6699
6700         hsw_restore_lcpll(dev_priv);
6701         hsw_pc8_restore_interrupts(dev);
6702         lpt_init_pch_refclk(dev);
6703
6704         if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
6705                 val = I915_READ(SOUTH_DSPCLK_GATE_D);
6706                 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
6707                 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
6708         }
6709
6710         intel_prepare_ddi(dev);
6711         i915_gem_init_swizzling(dev);
6712         mutex_lock(&dev_priv->rps.hw_lock);
6713         gen6_update_ring_freq(dev);
6714         mutex_unlock(&dev_priv->rps.hw_lock);
6715         dev_priv->pc8.enabled = false;
6716 }
6717
6718 void hsw_enable_package_c8(struct drm_i915_private *dev_priv)
6719 {
6720         if (!HAS_PC8(dev_priv->dev))
6721                 return;
6722
6723         mutex_lock(&dev_priv->pc8.lock);
6724         __hsw_enable_package_c8(dev_priv);
6725         mutex_unlock(&dev_priv->pc8.lock);
6726 }
6727
6728 void hsw_disable_package_c8(struct drm_i915_private *dev_priv)
6729 {
6730         if (!HAS_PC8(dev_priv->dev))
6731                 return;
6732
6733         mutex_lock(&dev_priv->pc8.lock);
6734         __hsw_disable_package_c8(dev_priv);
6735         mutex_unlock(&dev_priv->pc8.lock);
6736 }
6737
6738 static bool hsw_can_enable_package_c8(struct drm_i915_private *dev_priv)
6739 {
6740         struct drm_device *dev = dev_priv->dev;
6741         struct intel_crtc *crtc;
6742         uint32_t val;
6743
6744         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
6745                 if (crtc->base.enabled)
6746                         return false;
6747
6748         /* This case is still possible since we have the i915.disable_power_well
6749          * parameter and also the KVMr or something else might be requesting the
6750          * power well. */
6751         val = I915_READ(HSW_PWR_WELL_DRIVER);
6752         if (val != 0) {
6753                 DRM_DEBUG_KMS("Not enabling PC8: power well on\n");
6754                 return false;
6755         }
6756
6757         return true;
6758 }
6759
6760 /* Since we're called from modeset_global_resources there's no way to
6761  * symmetrically increase and decrease the refcount, so we use
6762  * dev_priv->pc8.requirements_met to track whether we already have the refcount
6763  * or not.
6764  */
6765 static void hsw_update_package_c8(struct drm_device *dev)
6766 {
6767         struct drm_i915_private *dev_priv = dev->dev_private;
6768         bool allow;
6769
6770         if (!HAS_PC8(dev_priv->dev))
6771                 return;
6772
6773         if (!i915_enable_pc8)
6774                 return;
6775
6776         mutex_lock(&dev_priv->pc8.lock);
6777
6778         allow = hsw_can_enable_package_c8(dev_priv);
6779
6780         if (allow == dev_priv->pc8.requirements_met)
6781                 goto done;
6782
6783         dev_priv->pc8.requirements_met = allow;
6784
6785         if (allow)
6786                 __hsw_enable_package_c8(dev_priv);
6787         else
6788                 __hsw_disable_package_c8(dev_priv);
6789
6790 done:
6791         mutex_unlock(&dev_priv->pc8.lock);
6792 }
6793
6794 static void hsw_package_c8_gpu_idle(struct drm_i915_private *dev_priv)
6795 {
6796         if (!HAS_PC8(dev_priv->dev))
6797                 return;
6798
6799         mutex_lock(&dev_priv->pc8.lock);
6800         if (!dev_priv->pc8.gpu_idle) {
6801                 dev_priv->pc8.gpu_idle = true;
6802                 __hsw_enable_package_c8(dev_priv);
6803         }
6804         mutex_unlock(&dev_priv->pc8.lock);
6805 }
6806
6807 static void hsw_package_c8_gpu_busy(struct drm_i915_private *dev_priv)
6808 {
6809         if (!HAS_PC8(dev_priv->dev))
6810                 return;
6811
6812         mutex_lock(&dev_priv->pc8.lock);
6813         if (dev_priv->pc8.gpu_idle) {
6814                 dev_priv->pc8.gpu_idle = false;
6815                 __hsw_disable_package_c8(dev_priv);
6816         }
6817         mutex_unlock(&dev_priv->pc8.lock);
6818 }
6819
6820 #define for_each_power_domain(domain, mask)                             \
6821         for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++)     \
6822                 if ((1 << (domain)) & (mask))
6823
6824 static unsigned long get_pipe_power_domains(struct drm_device *dev,
6825                                             enum pipe pipe, bool pfit_enabled)
6826 {
6827         unsigned long mask;
6828         enum transcoder transcoder;
6829
6830         transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
6831
6832         mask = BIT(POWER_DOMAIN_PIPE(pipe));
6833         mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
6834         if (pfit_enabled)
6835                 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
6836
6837         return mask;
6838 }
6839
6840 void intel_display_set_init_power(struct drm_device *dev, bool enable)
6841 {
6842         struct drm_i915_private *dev_priv = dev->dev_private;
6843
6844         if (dev_priv->power_domains.init_power_on == enable)
6845                 return;
6846
6847         if (enable)
6848                 intel_display_power_get(dev, POWER_DOMAIN_INIT);
6849         else
6850                 intel_display_power_put(dev, POWER_DOMAIN_INIT);
6851
6852         dev_priv->power_domains.init_power_on = enable;
6853 }
6854
6855 static void modeset_update_power_wells(struct drm_device *dev)
6856 {
6857         unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
6858         struct intel_crtc *crtc;
6859
6860         /*
6861          * First get all needed power domains, then put all unneeded, to avoid
6862          * any unnecessary toggling of the power wells.
6863          */
6864         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
6865                 enum intel_display_power_domain domain;
6866
6867                 if (!crtc->base.enabled)
6868                         continue;
6869
6870                 pipe_domains[crtc->pipe] = get_pipe_power_domains(dev,
6871                                                 crtc->pipe,
6872                                                 crtc->config.pch_pfit.enabled);
6873
6874                 for_each_power_domain(domain, pipe_domains[crtc->pipe])
6875                         intel_display_power_get(dev, domain);
6876         }
6877
6878         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
6879                 enum intel_display_power_domain domain;
6880
6881                 for_each_power_domain(domain, crtc->enabled_power_domains)
6882                         intel_display_power_put(dev, domain);
6883
6884                 crtc->enabled_power_domains = pipe_domains[crtc->pipe];
6885         }
6886
6887         intel_display_set_init_power(dev, false);
6888 }
6889
6890 static void haswell_modeset_global_resources(struct drm_device *dev)
6891 {
6892         modeset_update_power_wells(dev);
6893         hsw_update_package_c8(dev);
6894 }
6895
6896 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
6897                                  int x, int y,
6898                                  struct drm_framebuffer *fb)
6899 {
6900         struct drm_device *dev = crtc->dev;
6901         struct drm_i915_private *dev_priv = dev->dev_private;
6902         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6903         int plane = intel_crtc->plane;
6904         int ret;
6905
6906         if (!intel_ddi_pll_mode_set(crtc))
6907                 return -EINVAL;
6908
6909         if (intel_crtc->config.has_dp_encoder)
6910                 intel_dp_set_m_n(intel_crtc);
6911
6912         intel_crtc->lowfreq_avail = false;
6913
6914         intel_set_pipe_timings(intel_crtc);
6915
6916         if (intel_crtc->config.has_pch_encoder) {
6917                 intel_cpu_transcoder_set_m_n(intel_crtc,
6918                                              &intel_crtc->config.fdi_m_n);
6919         }
6920
6921         haswell_set_pipeconf(crtc);
6922
6923         intel_set_pipe_csc(crtc);
6924
6925         /* Set up the display plane register */
6926         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
6927         POSTING_READ(DSPCNTR(plane));
6928
6929         ret = intel_pipe_set_base(crtc, x, y, fb);
6930
6931         return ret;
6932 }
6933
6934 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
6935                                     struct intel_crtc_config *pipe_config)
6936 {
6937         struct drm_device *dev = crtc->base.dev;
6938         struct drm_i915_private *dev_priv = dev->dev_private;
6939         enum intel_display_power_domain pfit_domain;
6940         uint32_t tmp;
6941
6942         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6943         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6944
6945         tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
6946         if (tmp & TRANS_DDI_FUNC_ENABLE) {
6947                 enum pipe trans_edp_pipe;
6948                 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
6949                 default:
6950                         WARN(1, "unknown pipe linked to edp transcoder\n");
6951                 case TRANS_DDI_EDP_INPUT_A_ONOFF:
6952                 case TRANS_DDI_EDP_INPUT_A_ON:
6953                         trans_edp_pipe = PIPE_A;
6954                         break;
6955                 case TRANS_DDI_EDP_INPUT_B_ONOFF:
6956                         trans_edp_pipe = PIPE_B;
6957                         break;
6958                 case TRANS_DDI_EDP_INPUT_C_ONOFF:
6959                         trans_edp_pipe = PIPE_C;
6960                         break;
6961                 }
6962
6963                 if (trans_edp_pipe == crtc->pipe)
6964                         pipe_config->cpu_transcoder = TRANSCODER_EDP;
6965         }
6966
6967         if (!intel_display_power_enabled(dev,
6968                         POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
6969                 return false;
6970
6971         tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
6972         if (!(tmp & PIPECONF_ENABLE))
6973                 return false;
6974
6975         /*
6976          * Haswell has only FDI/PCH transcoder A. It is which is connected to
6977          * DDI E. So just check whether this pipe is wired to DDI E and whether
6978          * the PCH transcoder is on.
6979          */
6980         tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
6981         if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
6982             I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
6983                 pipe_config->has_pch_encoder = true;
6984
6985                 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
6986                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
6987                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
6988
6989                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
6990         }
6991
6992         intel_get_pipe_timings(crtc, pipe_config);
6993
6994         pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
6995         if (intel_display_power_enabled(dev, pfit_domain))
6996                 ironlake_get_pfit_config(crtc, pipe_config);
6997
6998         pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
6999                                    (I915_READ(IPS_CTL) & IPS_ENABLE);
7000
7001         pipe_config->pixel_multiplier = 1;
7002
7003         return true;
7004 }
7005
7006 static int intel_crtc_mode_set(struct drm_crtc *crtc,
7007                                int x, int y,
7008                                struct drm_framebuffer *fb)
7009 {
7010         struct drm_device *dev = crtc->dev;
7011         struct drm_i915_private *dev_priv = dev->dev_private;
7012         struct intel_encoder *encoder;
7013         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7014         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
7015         int pipe = intel_crtc->pipe;
7016         int ret;
7017
7018         drm_vblank_pre_modeset(dev, pipe);
7019
7020         ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
7021
7022         drm_vblank_post_modeset(dev, pipe);
7023
7024         if (ret != 0)
7025                 return ret;
7026
7027         for_each_encoder_on_crtc(dev, crtc, encoder) {
7028                 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
7029                         encoder->base.base.id,
7030                         drm_get_encoder_name(&encoder->base),
7031                         mode->base.id, mode->name);
7032                 encoder->mode_set(encoder);
7033         }
7034
7035         return 0;
7036 }
7037
7038 static struct {
7039         int clock;
7040         u32 config;
7041 } hdmi_audio_clock[] = {
7042         { DIV_ROUND_UP(25200 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 },
7043         { 25200, AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 }, /* default per bspec */
7044         { 27000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 },
7045         { 27000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 },
7046         { 54000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 },
7047         { 54000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 },
7048         { DIV_ROUND_UP(74250 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 },
7049         { 74250, AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 },
7050         { DIV_ROUND_UP(148500 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 },
7051         { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
7052 };
7053
7054 /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
7055 static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
7056 {
7057         int i;
7058
7059         for (i = 0; i < ARRAY_SIZE(hdmi_audio_clock); i++) {
7060                 if (mode->clock == hdmi_audio_clock[i].clock)
7061                         break;
7062         }
7063
7064         if (i == ARRAY_SIZE(hdmi_audio_clock)) {
7065                 DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n", mode->clock);
7066                 i = 1;
7067         }
7068
7069         DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n",
7070                       hdmi_audio_clock[i].clock,
7071                       hdmi_audio_clock[i].config);
7072
7073         return hdmi_audio_clock[i].config;
7074 }
7075
7076 static bool intel_eld_uptodate(struct drm_connector *connector,
7077                                int reg_eldv, uint32_t bits_eldv,
7078                                int reg_elda, uint32_t bits_elda,
7079                                int reg_edid)
7080 {
7081         struct drm_i915_private *dev_priv = connector->dev->dev_private;
7082         uint8_t *eld = connector->eld;
7083         uint32_t i;
7084
7085         i = I915_READ(reg_eldv);
7086         i &= bits_eldv;
7087
7088         if (!eld[0])
7089                 return !i;
7090
7091         if (!i)
7092                 return false;
7093
7094         i = I915_READ(reg_elda);
7095         i &= ~bits_elda;
7096         I915_WRITE(reg_elda, i);
7097
7098         for (i = 0; i < eld[2]; i++)
7099                 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
7100                         return false;
7101
7102         return true;
7103 }
7104
7105 static void g4x_write_eld(struct drm_connector *connector,
7106                           struct drm_crtc *crtc,
7107                           struct drm_display_mode *mode)
7108 {
7109         struct drm_i915_private *dev_priv = connector->dev->dev_private;
7110         uint8_t *eld = connector->eld;
7111         uint32_t eldv;
7112         uint32_t len;
7113         uint32_t i;
7114
7115         i = I915_READ(G4X_AUD_VID_DID);
7116
7117         if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
7118                 eldv = G4X_ELDV_DEVCL_DEVBLC;
7119         else
7120                 eldv = G4X_ELDV_DEVCTG;
7121
7122         if (intel_eld_uptodate(connector,
7123                                G4X_AUD_CNTL_ST, eldv,
7124                                G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
7125                                G4X_HDMIW_HDMIEDID))
7126                 return;
7127
7128         i = I915_READ(G4X_AUD_CNTL_ST);
7129         i &= ~(eldv | G4X_ELD_ADDR);
7130         len = (i >> 9) & 0x1f;          /* ELD buffer size */
7131         I915_WRITE(G4X_AUD_CNTL_ST, i);
7132
7133         if (!eld[0])
7134                 return;
7135
7136         len = min_t(uint8_t, eld[2], len);
7137         DRM_DEBUG_DRIVER("ELD size %d\n", len);
7138         for (i = 0; i < len; i++)
7139                 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
7140
7141         i = I915_READ(G4X_AUD_CNTL_ST);
7142         i |= eldv;
7143         I915_WRITE(G4X_AUD_CNTL_ST, i);
7144 }
7145
7146 static void haswell_write_eld(struct drm_connector *connector,
7147                               struct drm_crtc *crtc,
7148                               struct drm_display_mode *mode)
7149 {
7150         struct drm_i915_private *dev_priv = connector->dev->dev_private;
7151         uint8_t *eld = connector->eld;
7152         struct drm_device *dev = crtc->dev;
7153         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7154         uint32_t eldv;
7155         uint32_t i;
7156         int len;
7157         int pipe = to_intel_crtc(crtc)->pipe;
7158         int tmp;
7159
7160         int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
7161         int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
7162         int aud_config = HSW_AUD_CFG(pipe);
7163         int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
7164
7165
7166         DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
7167
7168         /* Audio output enable */
7169         DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
7170         tmp = I915_READ(aud_cntrl_st2);
7171         tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
7172         I915_WRITE(aud_cntrl_st2, tmp);
7173
7174         /* Wait for 1 vertical blank */
7175         intel_wait_for_vblank(dev, pipe);
7176
7177         /* Set ELD valid state */
7178         tmp = I915_READ(aud_cntrl_st2);
7179         DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
7180         tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
7181         I915_WRITE(aud_cntrl_st2, tmp);
7182         tmp = I915_READ(aud_cntrl_st2);
7183         DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
7184
7185         /* Enable HDMI mode */
7186         tmp = I915_READ(aud_config);
7187         DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
7188         /* clear N_programing_enable and N_value_index */
7189         tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
7190         I915_WRITE(aud_config, tmp);
7191
7192         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7193
7194         eldv = AUDIO_ELD_VALID_A << (pipe * 4);
7195         intel_crtc->eld_vld = true;
7196
7197         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7198                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7199                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
7200                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7201         } else {
7202                 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7203         }
7204
7205         if (intel_eld_uptodate(connector,
7206                                aud_cntrl_st2, eldv,
7207                                aud_cntl_st, IBX_ELD_ADDRESS,
7208                                hdmiw_hdmiedid))
7209                 return;
7210
7211         i = I915_READ(aud_cntrl_st2);
7212         i &= ~eldv;
7213         I915_WRITE(aud_cntrl_st2, i);
7214
7215         if (!eld[0])
7216                 return;
7217
7218         i = I915_READ(aud_cntl_st);
7219         i &= ~IBX_ELD_ADDRESS;
7220         I915_WRITE(aud_cntl_st, i);
7221         i = (i >> 29) & DIP_PORT_SEL_MASK;              /* DIP_Port_Select, 0x1 = PortB */
7222         DRM_DEBUG_DRIVER("port num:%d\n", i);
7223
7224         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
7225         DRM_DEBUG_DRIVER("ELD size %d\n", len);
7226         for (i = 0; i < len; i++)
7227                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7228
7229         i = I915_READ(aud_cntrl_st2);
7230         i |= eldv;
7231         I915_WRITE(aud_cntrl_st2, i);
7232
7233 }
7234
7235 static void ironlake_write_eld(struct drm_connector *connector,
7236                                struct drm_crtc *crtc,
7237                                struct drm_display_mode *mode)
7238 {
7239         struct drm_i915_private *dev_priv = connector->dev->dev_private;
7240         uint8_t *eld = connector->eld;
7241         uint32_t eldv;
7242         uint32_t i;
7243         int len;
7244         int hdmiw_hdmiedid;
7245         int aud_config;
7246         int aud_cntl_st;
7247         int aud_cntrl_st2;
7248         int pipe = to_intel_crtc(crtc)->pipe;
7249
7250         if (HAS_PCH_IBX(connector->dev)) {
7251                 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
7252                 aud_config = IBX_AUD_CFG(pipe);
7253                 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
7254                 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
7255         } else if (IS_VALLEYVIEW(connector->dev)) {
7256                 hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe);
7257                 aud_config = VLV_AUD_CFG(pipe);
7258                 aud_cntl_st = VLV_AUD_CNTL_ST(pipe);
7259                 aud_cntrl_st2 = VLV_AUD_CNTL_ST2;
7260         } else {
7261                 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
7262                 aud_config = CPT_AUD_CFG(pipe);
7263                 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
7264                 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
7265         }
7266
7267         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7268
7269         if (IS_VALLEYVIEW(connector->dev))  {
7270                 struct intel_encoder *intel_encoder;
7271                 struct intel_digital_port *intel_dig_port;
7272
7273                 intel_encoder = intel_attached_encoder(connector);
7274                 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
7275                 i = intel_dig_port->port;
7276         } else {
7277                 i = I915_READ(aud_cntl_st);
7278                 i = (i >> 29) & DIP_PORT_SEL_MASK;
7279                 /* DIP_Port_Select, 0x1 = PortB */
7280         }
7281
7282         if (!i) {
7283                 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
7284                 /* operate blindly on all ports */
7285                 eldv = IBX_ELD_VALIDB;
7286                 eldv |= IBX_ELD_VALIDB << 4;
7287                 eldv |= IBX_ELD_VALIDB << 8;
7288         } else {
7289                 DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i));
7290                 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
7291         }
7292
7293         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7294                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7295                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
7296                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7297         } else {
7298                 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7299         }
7300
7301         if (intel_eld_uptodate(connector,
7302                                aud_cntrl_st2, eldv,
7303                                aud_cntl_st, IBX_ELD_ADDRESS,
7304                                hdmiw_hdmiedid))
7305                 return;
7306
7307         i = I915_READ(aud_cntrl_st2);
7308         i &= ~eldv;
7309         I915_WRITE(aud_cntrl_st2, i);
7310
7311         if (!eld[0])
7312                 return;
7313
7314         i = I915_READ(aud_cntl_st);
7315         i &= ~IBX_ELD_ADDRESS;
7316         I915_WRITE(aud_cntl_st, i);
7317
7318         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
7319         DRM_DEBUG_DRIVER("ELD size %d\n", len);
7320         for (i = 0; i < len; i++)
7321                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7322
7323         i = I915_READ(aud_cntrl_st2);
7324         i |= eldv;
7325         I915_WRITE(aud_cntrl_st2, i);
7326 }
7327
7328 void intel_write_eld(struct drm_encoder *encoder,
7329                      struct drm_display_mode *mode)
7330 {
7331         struct drm_crtc *crtc = encoder->crtc;
7332         struct drm_connector *connector;
7333         struct drm_device *dev = encoder->dev;
7334         struct drm_i915_private *dev_priv = dev->dev_private;
7335
7336         connector = drm_select_eld(encoder, mode);
7337         if (!connector)
7338                 return;
7339
7340         DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7341                          connector->base.id,
7342                          drm_get_connector_name(connector),
7343                          connector->encoder->base.id,
7344                          drm_get_encoder_name(connector->encoder));
7345
7346         connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
7347
7348         if (dev_priv->display.write_eld)
7349                 dev_priv->display.write_eld(connector, crtc, mode);
7350 }
7351
7352 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
7353 {
7354         struct drm_device *dev = crtc->dev;
7355         struct drm_i915_private *dev_priv = dev->dev_private;
7356         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7357         bool visible = base != 0;
7358         u32 cntl;
7359
7360         if (intel_crtc->cursor_visible == visible)
7361                 return;
7362
7363         cntl = I915_READ(_CURACNTR);
7364         if (visible) {
7365                 /* On these chipsets we can only modify the base whilst
7366                  * the cursor is disabled.
7367                  */
7368                 I915_WRITE(_CURABASE, base);
7369
7370                 cntl &= ~(CURSOR_FORMAT_MASK);
7371                 /* XXX width must be 64, stride 256 => 0x00 << 28 */
7372                 cntl |= CURSOR_ENABLE |
7373                         CURSOR_GAMMA_ENABLE |
7374                         CURSOR_FORMAT_ARGB;
7375         } else
7376                 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
7377         I915_WRITE(_CURACNTR, cntl);
7378
7379         intel_crtc->cursor_visible = visible;
7380 }
7381
7382 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
7383 {
7384         struct drm_device *dev = crtc->dev;
7385         struct drm_i915_private *dev_priv = dev->dev_private;
7386         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7387         int pipe = intel_crtc->pipe;
7388         bool visible = base != 0;
7389
7390         if (intel_crtc->cursor_visible != visible) {
7391                 uint32_t cntl = I915_READ(CURCNTR(pipe));
7392                 if (base) {
7393                         cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
7394                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
7395                         cntl |= pipe << 28; /* Connect to correct pipe */
7396                 } else {
7397                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7398                         cntl |= CURSOR_MODE_DISABLE;
7399                 }
7400                 I915_WRITE(CURCNTR(pipe), cntl);
7401
7402                 intel_crtc->cursor_visible = visible;
7403         }
7404         /* and commit changes on next vblank */
7405         POSTING_READ(CURCNTR(pipe));
7406         I915_WRITE(CURBASE(pipe), base);
7407         POSTING_READ(CURBASE(pipe));
7408 }
7409
7410 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
7411 {
7412         struct drm_device *dev = crtc->dev;
7413         struct drm_i915_private *dev_priv = dev->dev_private;
7414         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7415         int pipe = intel_crtc->pipe;
7416         bool visible = base != 0;
7417
7418         if (intel_crtc->cursor_visible != visible) {
7419                 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
7420                 if (base) {
7421                         cntl &= ~CURSOR_MODE;
7422                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
7423                 } else {
7424                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7425                         cntl |= CURSOR_MODE_DISABLE;
7426                 }
7427                 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7428                         cntl |= CURSOR_PIPE_CSC_ENABLE;
7429                         cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
7430                 }
7431                 I915_WRITE(CURCNTR_IVB(pipe), cntl);
7432
7433                 intel_crtc->cursor_visible = visible;
7434         }
7435         /* and commit changes on next vblank */
7436         POSTING_READ(CURCNTR_IVB(pipe));
7437         I915_WRITE(CURBASE_IVB(pipe), base);
7438         POSTING_READ(CURBASE_IVB(pipe));
7439 }
7440
7441 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
7442 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
7443                                      bool on)
7444 {
7445         struct drm_device *dev = crtc->dev;
7446         struct drm_i915_private *dev_priv = dev->dev_private;
7447         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7448         int pipe = intel_crtc->pipe;
7449         int x = intel_crtc->cursor_x;
7450         int y = intel_crtc->cursor_y;
7451         u32 base = 0, pos = 0;
7452         bool visible;
7453
7454         if (on)
7455                 base = intel_crtc->cursor_addr;
7456
7457         if (x >= intel_crtc->config.pipe_src_w)
7458                 base = 0;
7459
7460         if (y >= intel_crtc->config.pipe_src_h)
7461                 base = 0;
7462
7463         if (x < 0) {
7464                 if (x + intel_crtc->cursor_width <= 0)
7465                         base = 0;
7466
7467                 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
7468                 x = -x;
7469         }
7470         pos |= x << CURSOR_X_SHIFT;
7471
7472         if (y < 0) {
7473                 if (y + intel_crtc->cursor_height <= 0)
7474                         base = 0;
7475
7476                 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
7477                 y = -y;
7478         }
7479         pos |= y << CURSOR_Y_SHIFT;
7480
7481         visible = base != 0;
7482         if (!visible && !intel_crtc->cursor_visible)
7483                 return;
7484
7485         if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7486                 I915_WRITE(CURPOS_IVB(pipe), pos);
7487                 ivb_update_cursor(crtc, base);
7488         } else {
7489                 I915_WRITE(CURPOS(pipe), pos);
7490                 if (IS_845G(dev) || IS_I865G(dev))
7491                         i845_update_cursor(crtc, base);
7492                 else
7493                         i9xx_update_cursor(crtc, base);
7494         }
7495 }
7496
7497 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
7498                                  struct drm_file *file,
7499                                  uint32_t handle,
7500                                  uint32_t width, uint32_t height)
7501 {
7502         struct drm_device *dev = crtc->dev;
7503         struct drm_i915_private *dev_priv = dev->dev_private;
7504         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7505         struct drm_i915_gem_object *obj;
7506         uint32_t addr;
7507         int ret;
7508
7509         /* if we want to turn off the cursor ignore width and height */
7510         if (!handle) {
7511                 DRM_DEBUG_KMS("cursor off\n");
7512                 addr = 0;
7513                 obj = NULL;
7514                 mutex_lock(&dev->struct_mutex);
7515                 goto finish;
7516         }
7517
7518         /* Currently we only support 64x64 cursors */
7519         if (width != 64 || height != 64) {
7520                 DRM_ERROR("we currently only support 64x64 cursors\n");
7521                 return -EINVAL;
7522         }
7523
7524         obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
7525         if (&obj->base == NULL)
7526                 return -ENOENT;
7527
7528         if (obj->base.size < width * height * 4) {
7529                 DRM_ERROR("buffer is to small\n");
7530                 ret = -ENOMEM;
7531                 goto fail;
7532         }
7533
7534         /* we only need to pin inside GTT if cursor is non-phy */
7535         mutex_lock(&dev->struct_mutex);
7536         if (!dev_priv->info->cursor_needs_physical) {
7537                 unsigned alignment;
7538
7539                 if (obj->tiling_mode) {
7540                         DRM_ERROR("cursor cannot be tiled\n");
7541                         ret = -EINVAL;
7542                         goto fail_locked;
7543                 }
7544
7545                 /* Note that the w/a also requires 2 PTE of padding following
7546                  * the bo. We currently fill all unused PTE with the shadow
7547                  * page and so we should always have valid PTE following the
7548                  * cursor preventing the VT-d warning.
7549                  */
7550                 alignment = 0;
7551                 if (need_vtd_wa(dev))
7552                         alignment = 64*1024;
7553
7554                 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
7555                 if (ret) {
7556                         DRM_ERROR("failed to move cursor bo into the GTT\n");
7557                         goto fail_locked;
7558                 }
7559
7560                 ret = i915_gem_object_put_fence(obj);
7561                 if (ret) {
7562                         DRM_ERROR("failed to release fence for cursor");
7563                         goto fail_unpin;
7564                 }
7565
7566                 addr = i915_gem_obj_ggtt_offset(obj);
7567         } else {
7568                 int align = IS_I830(dev) ? 16 * 1024 : 256;
7569                 ret = i915_gem_attach_phys_object(dev, obj,
7570                                                   (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
7571                                                   align);
7572                 if (ret) {
7573                         DRM_ERROR("failed to attach phys object\n");
7574                         goto fail_locked;
7575                 }
7576                 addr = obj->phys_obj->handle->busaddr;
7577         }
7578
7579         if (IS_GEN2(dev))
7580                 I915_WRITE(CURSIZE, (height << 12) | width);
7581
7582  finish:
7583         if (intel_crtc->cursor_bo) {
7584                 if (dev_priv->info->cursor_needs_physical) {
7585                         if (intel_crtc->cursor_bo != obj)
7586                                 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
7587                 } else
7588                         i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
7589                 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
7590         }
7591
7592         mutex_unlock(&dev->struct_mutex);
7593
7594         intel_crtc->cursor_addr = addr;
7595         intel_crtc->cursor_bo = obj;
7596         intel_crtc->cursor_width = width;
7597         intel_crtc->cursor_height = height;
7598
7599         if (intel_crtc->active)
7600                 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7601
7602         return 0;
7603 fail_unpin:
7604         i915_gem_object_unpin_from_display_plane(obj);
7605 fail_locked:
7606         mutex_unlock(&dev->struct_mutex);
7607 fail:
7608         drm_gem_object_unreference_unlocked(&obj->base);
7609         return ret;
7610 }
7611
7612 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
7613 {
7614         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7615
7616         intel_crtc->cursor_x = clamp_t(int, x, SHRT_MIN, SHRT_MAX);
7617         intel_crtc->cursor_y = clamp_t(int, y, SHRT_MIN, SHRT_MAX);
7618
7619         if (intel_crtc->active)
7620                 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7621
7622         return 0;
7623 }
7624
7625 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
7626                                  u16 *blue, uint32_t start, uint32_t size)
7627 {
7628         int end = (start + size > 256) ? 256 : start + size, i;
7629         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7630
7631         for (i = start; i < end; i++) {
7632                 intel_crtc->lut_r[i] = red[i] >> 8;
7633                 intel_crtc->lut_g[i] = green[i] >> 8;
7634                 intel_crtc->lut_b[i] = blue[i] >> 8;
7635         }
7636
7637         intel_crtc_load_lut(crtc);
7638 }
7639
7640 /* VESA 640x480x72Hz mode to set on the pipe */
7641 static struct drm_display_mode load_detect_mode = {
7642         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
7643                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
7644 };
7645
7646 static struct drm_framebuffer *
7647 intel_framebuffer_create(struct drm_device *dev,
7648                          struct drm_mode_fb_cmd2 *mode_cmd,
7649                          struct drm_i915_gem_object *obj)
7650 {
7651         struct intel_framebuffer *intel_fb;
7652         int ret;
7653
7654         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
7655         if (!intel_fb) {
7656                 drm_gem_object_unreference_unlocked(&obj->base);
7657                 return ERR_PTR(-ENOMEM);
7658         }
7659
7660         ret = i915_mutex_lock_interruptible(dev);
7661         if (ret)
7662                 goto err;
7663
7664         ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
7665         mutex_unlock(&dev->struct_mutex);
7666         if (ret)
7667                 goto err;
7668
7669         return &intel_fb->base;
7670 err:
7671         drm_gem_object_unreference_unlocked(&obj->base);
7672         kfree(intel_fb);
7673
7674         return ERR_PTR(ret);
7675 }
7676
7677 static u32
7678 intel_framebuffer_pitch_for_width(int width, int bpp)
7679 {
7680         u32 pitch = DIV_ROUND_UP(width * bpp, 8);
7681         return ALIGN(pitch, 64);
7682 }
7683
7684 static u32
7685 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
7686 {
7687         u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
7688         return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
7689 }
7690
7691 static struct drm_framebuffer *
7692 intel_framebuffer_create_for_mode(struct drm_device *dev,
7693                                   struct drm_display_mode *mode,
7694                                   int depth, int bpp)
7695 {
7696         struct drm_i915_gem_object *obj;
7697         struct drm_mode_fb_cmd2 mode_cmd = { 0 };
7698
7699         obj = i915_gem_alloc_object(dev,
7700                                     intel_framebuffer_size_for_mode(mode, bpp));
7701         if (obj == NULL)
7702                 return ERR_PTR(-ENOMEM);
7703
7704         mode_cmd.width = mode->hdisplay;
7705         mode_cmd.height = mode->vdisplay;
7706         mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
7707                                                                 bpp);
7708         mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
7709
7710         return intel_framebuffer_create(dev, &mode_cmd, obj);
7711 }
7712
7713 static struct drm_framebuffer *
7714 mode_fits_in_fbdev(struct drm_device *dev,
7715                    struct drm_display_mode *mode)
7716 {
7717 #ifdef CONFIG_DRM_I915_FBDEV
7718         struct drm_i915_private *dev_priv = dev->dev_private;
7719         struct drm_i915_gem_object *obj;
7720         struct drm_framebuffer *fb;
7721
7722         if (dev_priv->fbdev == NULL)
7723                 return NULL;
7724
7725         obj = dev_priv->fbdev->ifb.obj;
7726         if (obj == NULL)
7727                 return NULL;
7728
7729         fb = &dev_priv->fbdev->ifb.base;
7730         if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
7731                                                                fb->bits_per_pixel))
7732                 return NULL;
7733
7734         if (obj->base.size < mode->vdisplay * fb->pitches[0])
7735                 return NULL;
7736
7737         return fb;
7738 #else
7739         return NULL;
7740 #endif
7741 }
7742
7743 bool intel_get_load_detect_pipe(struct drm_connector *connector,
7744                                 struct drm_display_mode *mode,
7745                                 struct intel_load_detect_pipe *old)
7746 {
7747         struct intel_crtc *intel_crtc;
7748         struct intel_encoder *intel_encoder =
7749                 intel_attached_encoder(connector);
7750         struct drm_crtc *possible_crtc;
7751         struct drm_encoder *encoder = &intel_encoder->base;
7752         struct drm_crtc *crtc = NULL;
7753         struct drm_device *dev = encoder->dev;
7754         struct drm_framebuffer *fb;
7755         int i = -1;
7756
7757         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7758                       connector->base.id, drm_get_connector_name(connector),
7759                       encoder->base.id, drm_get_encoder_name(encoder));
7760
7761         /*
7762          * Algorithm gets a little messy:
7763          *
7764          *   - if the connector already has an assigned crtc, use it (but make
7765          *     sure it's on first)
7766          *
7767          *   - try to find the first unused crtc that can drive this connector,
7768          *     and use that if we find one
7769          */
7770
7771         /* See if we already have a CRTC for this connector */
7772         if (encoder->crtc) {
7773                 crtc = encoder->crtc;
7774
7775                 mutex_lock(&crtc->mutex);
7776
7777                 old->dpms_mode = connector->dpms;
7778                 old->load_detect_temp = false;
7779
7780                 /* Make sure the crtc and connector are running */
7781                 if (connector->dpms != DRM_MODE_DPMS_ON)
7782                         connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
7783
7784                 return true;
7785         }
7786
7787         /* Find an unused one (if possible) */
7788         list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
7789                 i++;
7790                 if (!(encoder->possible_crtcs & (1 << i)))
7791                         continue;
7792                 if (!possible_crtc->enabled) {
7793                         crtc = possible_crtc;
7794                         break;
7795                 }
7796         }
7797
7798         /*
7799          * If we didn't find an unused CRTC, don't use any.
7800          */
7801         if (!crtc) {
7802                 DRM_DEBUG_KMS("no pipe available for load-detect\n");
7803                 return false;
7804         }
7805
7806         mutex_lock(&crtc->mutex);
7807         intel_encoder->new_crtc = to_intel_crtc(crtc);
7808         to_intel_connector(connector)->new_encoder = intel_encoder;
7809
7810         intel_crtc = to_intel_crtc(crtc);
7811         old->dpms_mode = connector->dpms;
7812         old->load_detect_temp = true;
7813         old->release_fb = NULL;
7814
7815         if (!mode)
7816                 mode = &load_detect_mode;
7817
7818         /* We need a framebuffer large enough to accommodate all accesses
7819          * that the plane may generate whilst we perform load detection.
7820          * We can not rely on the fbcon either being present (we get called
7821          * during its initialisation to detect all boot displays, or it may
7822          * not even exist) or that it is large enough to satisfy the
7823          * requested mode.
7824          */
7825         fb = mode_fits_in_fbdev(dev, mode);
7826         if (fb == NULL) {
7827                 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
7828                 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
7829                 old->release_fb = fb;
7830         } else
7831                 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
7832         if (IS_ERR(fb)) {
7833                 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
7834                 mutex_unlock(&crtc->mutex);
7835                 return false;
7836         }
7837
7838         if (intel_set_mode(crtc, mode, 0, 0, fb)) {
7839                 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
7840                 if (old->release_fb)
7841                         old->release_fb->funcs->destroy(old->release_fb);
7842                 mutex_unlock(&crtc->mutex);
7843                 return false;
7844         }
7845
7846         /* let the connector get through one full cycle before testing */
7847         intel_wait_for_vblank(dev, intel_crtc->pipe);
7848         return true;
7849 }
7850
7851 void intel_release_load_detect_pipe(struct drm_connector *connector,
7852                                     struct intel_load_detect_pipe *old)
7853 {
7854         struct intel_encoder *intel_encoder =
7855                 intel_attached_encoder(connector);
7856         struct drm_encoder *encoder = &intel_encoder->base;
7857         struct drm_crtc *crtc = encoder->crtc;
7858
7859         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7860                       connector->base.id, drm_get_connector_name(connector),
7861                       encoder->base.id, drm_get_encoder_name(encoder));
7862
7863         if (old->load_detect_temp) {
7864                 to_intel_connector(connector)->new_encoder = NULL;
7865                 intel_encoder->new_crtc = NULL;
7866                 intel_set_mode(crtc, NULL, 0, 0, NULL);
7867
7868                 if (old->release_fb) {
7869                         drm_framebuffer_unregister_private(old->release_fb);
7870                         drm_framebuffer_unreference(old->release_fb);
7871                 }
7872
7873                 mutex_unlock(&crtc->mutex);
7874                 return;
7875         }
7876
7877         /* Switch crtc and encoder back off if necessary */
7878         if (old->dpms_mode != DRM_MODE_DPMS_ON)
7879                 connector->funcs->dpms(connector, old->dpms_mode);
7880
7881         mutex_unlock(&crtc->mutex);
7882 }
7883
7884 static int i9xx_pll_refclk(struct drm_device *dev,
7885                            const struct intel_crtc_config *pipe_config)
7886 {
7887         struct drm_i915_private *dev_priv = dev->dev_private;
7888         u32 dpll = pipe_config->dpll_hw_state.dpll;
7889
7890         if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
7891                 return dev_priv->vbt.lvds_ssc_freq * 1000;
7892         else if (HAS_PCH_SPLIT(dev))
7893                 return 120000;
7894         else if (!IS_GEN2(dev))
7895                 return 96000;
7896         else
7897                 return 48000;
7898 }
7899
7900 /* Returns the clock of the currently programmed mode of the given pipe. */
7901 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
7902                                 struct intel_crtc_config *pipe_config)
7903 {
7904         struct drm_device *dev = crtc->base.dev;
7905         struct drm_i915_private *dev_priv = dev->dev_private;
7906         int pipe = pipe_config->cpu_transcoder;
7907         u32 dpll = pipe_config->dpll_hw_state.dpll;
7908         u32 fp;
7909         intel_clock_t clock;
7910         int refclk = i9xx_pll_refclk(dev, pipe_config);
7911
7912         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
7913                 fp = pipe_config->dpll_hw_state.fp0;
7914         else
7915                 fp = pipe_config->dpll_hw_state.fp1;
7916
7917         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
7918         if (IS_PINEVIEW(dev)) {
7919                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
7920                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
7921         } else {
7922                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
7923                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
7924         }
7925
7926         if (!IS_GEN2(dev)) {
7927                 if (IS_PINEVIEW(dev))
7928                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
7929                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
7930                 else
7931                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
7932                                DPLL_FPA01_P1_POST_DIV_SHIFT);
7933
7934                 switch (dpll & DPLL_MODE_MASK) {
7935                 case DPLLB_MODE_DAC_SERIAL:
7936                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
7937                                 5 : 10;
7938                         break;
7939                 case DPLLB_MODE_LVDS:
7940                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
7941                                 7 : 14;
7942                         break;
7943                 default:
7944                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
7945                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
7946                         return;
7947                 }
7948
7949                 if (IS_PINEVIEW(dev))
7950                         pineview_clock(refclk, &clock);
7951                 else
7952                         i9xx_clock(refclk, &clock);
7953         } else {
7954                 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
7955
7956                 if (is_lvds) {
7957                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
7958                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
7959                         clock.p2 = 14;
7960                 } else {
7961                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
7962                                 clock.p1 = 2;
7963                         else {
7964                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
7965                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
7966                         }
7967                         if (dpll & PLL_P2_DIVIDE_BY_4)
7968                                 clock.p2 = 4;
7969                         else
7970                                 clock.p2 = 2;
7971                 }
7972
7973                 i9xx_clock(refclk, &clock);
7974         }
7975
7976         /*
7977          * This value includes pixel_multiplier. We will use
7978          * port_clock to compute adjusted_mode.crtc_clock in the
7979          * encoder's get_config() function.
7980          */
7981         pipe_config->port_clock = clock.dot;
7982 }
7983
7984 int intel_dotclock_calculate(int link_freq,
7985                              const struct intel_link_m_n *m_n)
7986 {
7987         /*
7988          * The calculation for the data clock is:
7989          * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
7990          * But we want to avoid losing precison if possible, so:
7991          * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
7992          *
7993          * and the link clock is simpler:
7994          * link_clock = (m * link_clock) / n
7995          */
7996
7997         if (!m_n->link_n)
7998                 return 0;
7999
8000         return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
8001 }
8002
8003 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
8004                                    struct intel_crtc_config *pipe_config)
8005 {
8006         struct drm_device *dev = crtc->base.dev;
8007
8008         /* read out port_clock from the DPLL */
8009         i9xx_crtc_clock_get(crtc, pipe_config);
8010
8011         /*
8012          * This value does not include pixel_multiplier.
8013          * We will check that port_clock and adjusted_mode.crtc_clock
8014          * agree once we know their relationship in the encoder's
8015          * get_config() function.
8016          */
8017         pipe_config->adjusted_mode.crtc_clock =
8018                 intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
8019                                          &pipe_config->fdi_m_n);
8020 }
8021
8022 /** Returns the currently programmed mode of the given pipe. */
8023 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
8024                                              struct drm_crtc *crtc)
8025 {
8026         struct drm_i915_private *dev_priv = dev->dev_private;
8027         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8028         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
8029         struct drm_display_mode *mode;
8030         struct intel_crtc_config pipe_config;
8031         int htot = I915_READ(HTOTAL(cpu_transcoder));
8032         int hsync = I915_READ(HSYNC(cpu_transcoder));
8033         int vtot = I915_READ(VTOTAL(cpu_transcoder));
8034         int vsync = I915_READ(VSYNC(cpu_transcoder));
8035         enum pipe pipe = intel_crtc->pipe;
8036
8037         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
8038         if (!mode)
8039                 return NULL;
8040
8041         /*
8042          * Construct a pipe_config sufficient for getting the clock info
8043          * back out of crtc_clock_get.
8044          *
8045          * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
8046          * to use a real value here instead.
8047          */
8048         pipe_config.cpu_transcoder = (enum transcoder) pipe;
8049         pipe_config.pixel_multiplier = 1;
8050         pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
8051         pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
8052         pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
8053         i9xx_crtc_clock_get(intel_crtc, &pipe_config);
8054
8055         mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
8056         mode->hdisplay = (htot & 0xffff) + 1;
8057         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
8058         mode->hsync_start = (hsync & 0xffff) + 1;
8059         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
8060         mode->vdisplay = (vtot & 0xffff) + 1;
8061         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
8062         mode->vsync_start = (vsync & 0xffff) + 1;
8063         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
8064
8065         drm_mode_set_name(mode);
8066
8067         return mode;
8068 }
8069
8070 static void intel_increase_pllclock(struct drm_crtc *crtc)
8071 {
8072         struct drm_device *dev = crtc->dev;
8073         drm_i915_private_t *dev_priv = dev->dev_private;
8074         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8075         int pipe = intel_crtc->pipe;
8076         int dpll_reg = DPLL(pipe);
8077         int dpll;
8078
8079         if (HAS_PCH_SPLIT(dev))
8080                 return;
8081
8082         if (!dev_priv->lvds_downclock_avail)
8083                 return;
8084
8085         dpll = I915_READ(dpll_reg);
8086         if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
8087                 DRM_DEBUG_DRIVER("upclocking LVDS\n");
8088
8089                 assert_panel_unlocked(dev_priv, pipe);
8090
8091                 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
8092                 I915_WRITE(dpll_reg, dpll);
8093                 intel_wait_for_vblank(dev, pipe);
8094
8095                 dpll = I915_READ(dpll_reg);
8096                 if (dpll & DISPLAY_RATE_SELECT_FPA1)
8097                         DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
8098         }
8099 }
8100
8101 static void intel_decrease_pllclock(struct drm_crtc *crtc)
8102 {
8103         struct drm_device *dev = crtc->dev;
8104         drm_i915_private_t *dev_priv = dev->dev_private;
8105         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8106
8107         if (HAS_PCH_SPLIT(dev))
8108                 return;
8109
8110         if (!dev_priv->lvds_downclock_avail)
8111                 return;
8112
8113         /*
8114          * Since this is called by a timer, we should never get here in
8115          * the manual case.
8116          */
8117         if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
8118                 int pipe = intel_crtc->pipe;
8119                 int dpll_reg = DPLL(pipe);
8120                 int dpll;
8121
8122                 DRM_DEBUG_DRIVER("downclocking LVDS\n");
8123
8124                 assert_panel_unlocked(dev_priv, pipe);
8125
8126                 dpll = I915_READ(dpll_reg);
8127                 dpll |= DISPLAY_RATE_SELECT_FPA1;
8128                 I915_WRITE(dpll_reg, dpll);
8129                 intel_wait_for_vblank(dev, pipe);
8130                 dpll = I915_READ(dpll_reg);
8131                 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
8132                         DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
8133         }
8134
8135 }
8136
8137 void intel_mark_busy(struct drm_device *dev)
8138 {
8139         struct drm_i915_private *dev_priv = dev->dev_private;
8140
8141         hsw_package_c8_gpu_busy(dev_priv);
8142         i915_update_gfx_val(dev_priv);
8143 }
8144
8145 void intel_mark_idle(struct drm_device *dev)
8146 {
8147         struct drm_i915_private *dev_priv = dev->dev_private;
8148         struct drm_crtc *crtc;
8149
8150         hsw_package_c8_gpu_idle(dev_priv);
8151
8152         if (!i915_powersave)
8153                 return;
8154
8155         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8156                 if (!crtc->fb)
8157                         continue;
8158
8159                 intel_decrease_pllclock(crtc);
8160         }
8161
8162         if (dev_priv->info->gen >= 6)
8163                 gen6_rps_idle(dev->dev_private);
8164 }
8165
8166 void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
8167                         struct intel_ring_buffer *ring)
8168 {
8169         struct drm_device *dev = obj->base.dev;
8170         struct drm_crtc *crtc;
8171
8172         if (!i915_powersave)
8173                 return;
8174
8175         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8176                 if (!crtc->fb)
8177                         continue;
8178
8179                 if (to_intel_framebuffer(crtc->fb)->obj != obj)
8180                         continue;
8181
8182                 intel_increase_pllclock(crtc);
8183                 if (ring && intel_fbc_enabled(dev))
8184                         ring->fbc_dirty = true;
8185         }
8186 }
8187
8188 static void intel_crtc_destroy(struct drm_crtc *crtc)
8189 {
8190         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8191         struct drm_device *dev = crtc->dev;
8192         struct intel_unpin_work *work;
8193         unsigned long flags;
8194
8195         spin_lock_irqsave(&dev->event_lock, flags);
8196         work = intel_crtc->unpin_work;
8197         intel_crtc->unpin_work = NULL;
8198         spin_unlock_irqrestore(&dev->event_lock, flags);
8199
8200         if (work) {
8201                 cancel_work_sync(&work->work);
8202                 kfree(work);
8203         }
8204
8205         intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
8206
8207         drm_crtc_cleanup(crtc);
8208
8209         kfree(intel_crtc);
8210 }
8211
8212 static void intel_unpin_work_fn(struct work_struct *__work)
8213 {
8214         struct intel_unpin_work *work =
8215                 container_of(__work, struct intel_unpin_work, work);
8216         struct drm_device *dev = work->crtc->dev;
8217
8218         mutex_lock(&dev->struct_mutex);
8219         intel_unpin_fb_obj(work->old_fb_obj);
8220         drm_gem_object_unreference(&work->pending_flip_obj->base);
8221         drm_gem_object_unreference(&work->old_fb_obj->base);
8222
8223         intel_update_fbc(dev);
8224         mutex_unlock(&dev->struct_mutex);
8225
8226         BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
8227         atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
8228
8229         kfree(work);
8230 }
8231
8232 static void do_intel_finish_page_flip(struct drm_device *dev,
8233                                       struct drm_crtc *crtc)
8234 {
8235         drm_i915_private_t *dev_priv = dev->dev_private;
8236         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8237         struct intel_unpin_work *work;
8238         unsigned long flags;
8239
8240         /* Ignore early vblank irqs */
8241         if (intel_crtc == NULL)
8242                 return;
8243
8244         spin_lock_irqsave(&dev->event_lock, flags);
8245         work = intel_crtc->unpin_work;
8246
8247         /* Ensure we don't miss a work->pending update ... */
8248         smp_rmb();
8249
8250         if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
8251                 spin_unlock_irqrestore(&dev->event_lock, flags);
8252                 return;
8253         }
8254
8255         /* and that the unpin work is consistent wrt ->pending. */
8256         smp_rmb();
8257
8258         intel_crtc->unpin_work = NULL;
8259
8260         if (work->event)
8261                 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
8262
8263         drm_vblank_put(dev, intel_crtc->pipe);
8264
8265         spin_unlock_irqrestore(&dev->event_lock, flags);
8266
8267         wake_up_all(&dev_priv->pending_flip_queue);
8268
8269         queue_work(dev_priv->wq, &work->work);
8270
8271         trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
8272 }
8273
8274 void intel_finish_page_flip(struct drm_device *dev, int pipe)
8275 {
8276         drm_i915_private_t *dev_priv = dev->dev_private;
8277         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
8278
8279         do_intel_finish_page_flip(dev, crtc);
8280 }
8281
8282 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
8283 {
8284         drm_i915_private_t *dev_priv = dev->dev_private;
8285         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
8286
8287         do_intel_finish_page_flip(dev, crtc);
8288 }
8289
8290 void intel_prepare_page_flip(struct drm_device *dev, int plane)
8291 {
8292         drm_i915_private_t *dev_priv = dev->dev_private;
8293         struct intel_crtc *intel_crtc =
8294                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
8295         unsigned long flags;
8296
8297         /* NB: An MMIO update of the plane base pointer will also
8298          * generate a page-flip completion irq, i.e. every modeset
8299          * is also accompanied by a spurious intel_prepare_page_flip().
8300          */
8301         spin_lock_irqsave(&dev->event_lock, flags);
8302         if (intel_crtc->unpin_work)
8303                 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
8304         spin_unlock_irqrestore(&dev->event_lock, flags);
8305 }
8306
8307 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
8308 {
8309         /* Ensure that the work item is consistent when activating it ... */
8310         smp_wmb();
8311         atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
8312         /* and that it is marked active as soon as the irq could fire. */
8313         smp_wmb();
8314 }
8315
8316 static int intel_gen2_queue_flip(struct drm_device *dev,
8317                                  struct drm_crtc *crtc,
8318                                  struct drm_framebuffer *fb,
8319                                  struct drm_i915_gem_object *obj,
8320                                  uint32_t flags)
8321 {
8322         struct drm_i915_private *dev_priv = dev->dev_private;
8323         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8324         u32 flip_mask;
8325         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8326         int ret;
8327
8328         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8329         if (ret)
8330                 goto err;
8331
8332         ret = intel_ring_begin(ring, 6);
8333         if (ret)
8334                 goto err_unpin;
8335
8336         /* Can't queue multiple flips, so wait for the previous
8337          * one to finish before executing the next.
8338          */
8339         if (intel_crtc->plane)
8340                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8341         else
8342                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8343         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8344         intel_ring_emit(ring, MI_NOOP);
8345         intel_ring_emit(ring, MI_DISPLAY_FLIP |
8346                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8347         intel_ring_emit(ring, fb->pitches[0]);
8348         intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8349         intel_ring_emit(ring, 0); /* aux display base address, unused */
8350
8351         intel_mark_page_flip_active(intel_crtc);
8352         __intel_ring_advance(ring);
8353         return 0;
8354
8355 err_unpin:
8356         intel_unpin_fb_obj(obj);
8357 err:
8358         return ret;
8359 }
8360
8361 static int intel_gen3_queue_flip(struct drm_device *dev,
8362                                  struct drm_crtc *crtc,
8363                                  struct drm_framebuffer *fb,
8364                                  struct drm_i915_gem_object *obj,
8365                                  uint32_t flags)
8366 {
8367         struct drm_i915_private *dev_priv = dev->dev_private;
8368         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8369         u32 flip_mask;
8370         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8371         int ret;
8372
8373         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8374         if (ret)
8375                 goto err;
8376
8377         ret = intel_ring_begin(ring, 6);
8378         if (ret)
8379                 goto err_unpin;
8380
8381         if (intel_crtc->plane)
8382                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8383         else
8384                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8385         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8386         intel_ring_emit(ring, MI_NOOP);
8387         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
8388                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8389         intel_ring_emit(ring, fb->pitches[0]);
8390         intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8391         intel_ring_emit(ring, MI_NOOP);
8392
8393         intel_mark_page_flip_active(intel_crtc);
8394         __intel_ring_advance(ring);
8395         return 0;
8396
8397 err_unpin:
8398         intel_unpin_fb_obj(obj);
8399 err:
8400         return ret;
8401 }
8402
8403 static int intel_gen4_queue_flip(struct drm_device *dev,
8404                                  struct drm_crtc *crtc,
8405                                  struct drm_framebuffer *fb,
8406                                  struct drm_i915_gem_object *obj,
8407                                  uint32_t flags)
8408 {
8409         struct drm_i915_private *dev_priv = dev->dev_private;
8410         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8411         uint32_t pf, pipesrc;
8412         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8413         int ret;
8414
8415         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8416         if (ret)
8417                 goto err;
8418
8419         ret = intel_ring_begin(ring, 4);
8420         if (ret)
8421                 goto err_unpin;
8422
8423         /* i965+ uses the linear or tiled offsets from the
8424          * Display Registers (which do not change across a page-flip)
8425          * so we need only reprogram the base address.
8426          */
8427         intel_ring_emit(ring, MI_DISPLAY_FLIP |
8428                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8429         intel_ring_emit(ring, fb->pitches[0]);
8430         intel_ring_emit(ring,
8431                         (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) |
8432                         obj->tiling_mode);
8433
8434         /* XXX Enabling the panel-fitter across page-flip is so far
8435          * untested on non-native modes, so ignore it for now.
8436          * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
8437          */
8438         pf = 0;
8439         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8440         intel_ring_emit(ring, pf | pipesrc);
8441
8442         intel_mark_page_flip_active(intel_crtc);
8443         __intel_ring_advance(ring);
8444         return 0;
8445
8446 err_unpin:
8447         intel_unpin_fb_obj(obj);
8448 err:
8449         return ret;
8450 }
8451
8452 static int intel_gen6_queue_flip(struct drm_device *dev,
8453                                  struct drm_crtc *crtc,
8454                                  struct drm_framebuffer *fb,
8455                                  struct drm_i915_gem_object *obj,
8456                                  uint32_t flags)
8457 {
8458         struct drm_i915_private *dev_priv = dev->dev_private;
8459         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8460         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8461         uint32_t pf, pipesrc;
8462         int ret;
8463
8464         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8465         if (ret)
8466                 goto err;
8467
8468         ret = intel_ring_begin(ring, 4);
8469         if (ret)
8470                 goto err_unpin;
8471
8472         intel_ring_emit(ring, MI_DISPLAY_FLIP |
8473                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8474         intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
8475         intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8476
8477         /* Contrary to the suggestions in the documentation,
8478          * "Enable Panel Fitter" does not seem to be required when page
8479          * flipping with a non-native mode, and worse causes a normal
8480          * modeset to fail.
8481          * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
8482          */
8483         pf = 0;
8484         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8485         intel_ring_emit(ring, pf | pipesrc);
8486
8487         intel_mark_page_flip_active(intel_crtc);
8488         __intel_ring_advance(ring);
8489         return 0;
8490
8491 err_unpin:
8492         intel_unpin_fb_obj(obj);
8493 err:
8494         return ret;
8495 }
8496
8497 static int intel_gen7_queue_flip(struct drm_device *dev,
8498                                  struct drm_crtc *crtc,
8499                                  struct drm_framebuffer *fb,
8500                                  struct drm_i915_gem_object *obj,
8501                                  uint32_t flags)
8502 {
8503         struct drm_i915_private *dev_priv = dev->dev_private;
8504         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8505         struct intel_ring_buffer *ring;
8506         uint32_t plane_bit = 0;
8507         int len, ret;
8508
8509         ring = obj->ring;
8510         if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS)
8511                 ring = &dev_priv->ring[BCS];
8512
8513         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8514         if (ret)
8515                 goto err;
8516
8517         switch(intel_crtc->plane) {
8518         case PLANE_A:
8519                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
8520                 break;
8521         case PLANE_B:
8522                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
8523                 break;
8524         case PLANE_C:
8525                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
8526                 break;
8527         default:
8528                 WARN_ONCE(1, "unknown plane in flip command\n");
8529                 ret = -ENODEV;
8530                 goto err_unpin;
8531         }
8532
8533         len = 4;
8534         if (ring->id == RCS)
8535                 len += 6;
8536
8537         ret = intel_ring_begin(ring, len);
8538         if (ret)
8539                 goto err_unpin;
8540
8541         /* Unmask the flip-done completion message. Note that the bspec says that
8542          * we should do this for both the BCS and RCS, and that we must not unmask
8543          * more than one flip event at any time (or ensure that one flip message
8544          * can be sent by waiting for flip-done prior to queueing new flips).
8545          * Experimentation says that BCS works despite DERRMR masking all
8546          * flip-done completion events and that unmasking all planes at once
8547          * for the RCS also doesn't appear to drop events. Setting the DERRMR
8548          * to zero does lead to lockups within MI_DISPLAY_FLIP.
8549          */
8550         if (ring->id == RCS) {
8551                 intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
8552                 intel_ring_emit(ring, DERRMR);
8553                 intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
8554                                         DERRMR_PIPEB_PRI_FLIP_DONE |
8555                                         DERRMR_PIPEC_PRI_FLIP_DONE));
8556                 intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1));
8557                 intel_ring_emit(ring, DERRMR);
8558                 intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
8559         }
8560
8561         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
8562         intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
8563         intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8564         intel_ring_emit(ring, (MI_NOOP));
8565
8566         intel_mark_page_flip_active(intel_crtc);
8567         __intel_ring_advance(ring);
8568         return 0;
8569
8570 err_unpin:
8571         intel_unpin_fb_obj(obj);
8572 err:
8573         return ret;
8574 }
8575
8576 static int intel_default_queue_flip(struct drm_device *dev,
8577                                     struct drm_crtc *crtc,
8578                                     struct drm_framebuffer *fb,
8579                                     struct drm_i915_gem_object *obj,
8580                                     uint32_t flags)
8581 {
8582         return -ENODEV;
8583 }
8584
8585 static int intel_crtc_page_flip(struct drm_crtc *crtc,
8586                                 struct drm_framebuffer *fb,
8587                                 struct drm_pending_vblank_event *event,
8588                                 uint32_t page_flip_flags)
8589 {
8590         struct drm_device *dev = crtc->dev;
8591         struct drm_i915_private *dev_priv = dev->dev_private;
8592         struct drm_framebuffer *old_fb = crtc->fb;
8593         struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
8594         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8595         struct intel_unpin_work *work;
8596         unsigned long flags;
8597         int ret;
8598
8599         /* Can't change pixel format via MI display flips. */
8600         if (fb->pixel_format != crtc->fb->pixel_format)
8601                 return -EINVAL;
8602
8603         /*
8604          * TILEOFF/LINOFF registers can't be changed via MI display flips.
8605          * Note that pitch changes could also affect these register.
8606          */
8607         if (INTEL_INFO(dev)->gen > 3 &&
8608             (fb->offsets[0] != crtc->fb->offsets[0] ||
8609              fb->pitches[0] != crtc->fb->pitches[0]))
8610                 return -EINVAL;
8611
8612         work = kzalloc(sizeof(*work), GFP_KERNEL);
8613         if (work == NULL)
8614                 return -ENOMEM;
8615
8616         work->event = event;
8617         work->crtc = crtc;
8618         work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
8619         INIT_WORK(&work->work, intel_unpin_work_fn);
8620
8621         ret = drm_vblank_get(dev, intel_crtc->pipe);
8622         if (ret)
8623                 goto free_work;
8624
8625         /* We borrow the event spin lock for protecting unpin_work */
8626         spin_lock_irqsave(&dev->event_lock, flags);
8627         if (intel_crtc->unpin_work) {
8628                 spin_unlock_irqrestore(&dev->event_lock, flags);
8629                 kfree(work);
8630                 drm_vblank_put(dev, intel_crtc->pipe);
8631
8632                 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
8633                 return -EBUSY;
8634         }
8635         intel_crtc->unpin_work = work;
8636         spin_unlock_irqrestore(&dev->event_lock, flags);
8637
8638         if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
8639                 flush_workqueue(dev_priv->wq);
8640
8641         ret = i915_mutex_lock_interruptible(dev);
8642         if (ret)
8643                 goto cleanup;
8644
8645         /* Reference the objects for the scheduled work. */
8646         drm_gem_object_reference(&work->old_fb_obj->base);
8647         drm_gem_object_reference(&obj->base);
8648
8649         crtc->fb = fb;
8650
8651         work->pending_flip_obj = obj;
8652
8653         work->enable_stall_check = true;
8654
8655         atomic_inc(&intel_crtc->unpin_work_count);
8656         intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
8657
8658         ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags);
8659         if (ret)
8660                 goto cleanup_pending;
8661
8662         intel_disable_fbc(dev);
8663         intel_mark_fb_busy(obj, NULL);
8664         mutex_unlock(&dev->struct_mutex);
8665
8666         trace_i915_flip_request(intel_crtc->plane, obj);
8667
8668         return 0;
8669
8670 cleanup_pending:
8671         atomic_dec(&intel_crtc->unpin_work_count);
8672         crtc->fb = old_fb;
8673         drm_gem_object_unreference(&work->old_fb_obj->base);
8674         drm_gem_object_unreference(&obj->base);
8675         mutex_unlock(&dev->struct_mutex);
8676
8677 cleanup:
8678         spin_lock_irqsave(&dev->event_lock, flags);
8679         intel_crtc->unpin_work = NULL;
8680         spin_unlock_irqrestore(&dev->event_lock, flags);
8681
8682         drm_vblank_put(dev, intel_crtc->pipe);
8683 free_work:
8684         kfree(work);
8685
8686         return ret;
8687 }
8688
8689 static struct drm_crtc_helper_funcs intel_helper_funcs = {
8690         .mode_set_base_atomic = intel_pipe_set_base_atomic,
8691         .load_lut = intel_crtc_load_lut,
8692 };
8693
8694 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
8695                                   struct drm_crtc *crtc)
8696 {
8697         struct drm_device *dev;
8698         struct drm_crtc *tmp;
8699         int crtc_mask = 1;
8700
8701         WARN(!crtc, "checking null crtc?\n");
8702
8703         dev = crtc->dev;
8704
8705         list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
8706                 if (tmp == crtc)
8707                         break;
8708                 crtc_mask <<= 1;
8709         }
8710
8711         if (encoder->possible_crtcs & crtc_mask)
8712                 return true;
8713         return false;
8714 }
8715
8716 /**
8717  * intel_modeset_update_staged_output_state
8718  *
8719  * Updates the staged output configuration state, e.g. after we've read out the
8720  * current hw state.
8721  */
8722 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
8723 {
8724         struct intel_encoder *encoder;
8725         struct intel_connector *connector;
8726
8727         list_for_each_entry(connector, &dev->mode_config.connector_list,
8728                             base.head) {
8729                 connector->new_encoder =
8730                         to_intel_encoder(connector->base.encoder);
8731         }
8732
8733         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8734                             base.head) {
8735                 encoder->new_crtc =
8736                         to_intel_crtc(encoder->base.crtc);
8737         }
8738 }
8739
8740 /**
8741  * intel_modeset_commit_output_state
8742  *
8743  * This function copies the stage display pipe configuration to the real one.
8744  */
8745 static void intel_modeset_commit_output_state(struct drm_device *dev)
8746 {
8747         struct intel_encoder *encoder;
8748         struct intel_connector *connector;
8749
8750         list_for_each_entry(connector, &dev->mode_config.connector_list,
8751                             base.head) {
8752                 connector->base.encoder = &connector->new_encoder->base;
8753         }
8754
8755         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8756                             base.head) {
8757                 encoder->base.crtc = &encoder->new_crtc->base;
8758         }
8759 }
8760
8761 static void
8762 connected_sink_compute_bpp(struct intel_connector * connector,
8763                            struct intel_crtc_config *pipe_config)
8764 {
8765         int bpp = pipe_config->pipe_bpp;
8766
8767         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
8768                 connector->base.base.id,
8769                 drm_get_connector_name(&connector->base));
8770
8771         /* Don't use an invalid EDID bpc value */
8772         if (connector->base.display_info.bpc &&
8773             connector->base.display_info.bpc * 3 < bpp) {
8774                 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
8775                               bpp, connector->base.display_info.bpc*3);
8776                 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
8777         }
8778
8779         /* Clamp bpp to 8 on screens without EDID 1.4 */
8780         if (connector->base.display_info.bpc == 0 && bpp > 24) {
8781                 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
8782                               bpp);
8783                 pipe_config->pipe_bpp = 24;
8784         }
8785 }
8786
8787 static int
8788 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
8789                           struct drm_framebuffer *fb,
8790                           struct intel_crtc_config *pipe_config)
8791 {
8792         struct drm_device *dev = crtc->base.dev;
8793         struct intel_connector *connector;
8794         int bpp;
8795
8796         switch (fb->pixel_format) {
8797         case DRM_FORMAT_C8:
8798                 bpp = 8*3; /* since we go through a colormap */
8799                 break;
8800         case DRM_FORMAT_XRGB1555:
8801         case DRM_FORMAT_ARGB1555:
8802                 /* checked in intel_framebuffer_init already */
8803                 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
8804                         return -EINVAL;
8805         case DRM_FORMAT_RGB565:
8806                 bpp = 6*3; /* min is 18bpp */
8807                 break;
8808         case DRM_FORMAT_XBGR8888:
8809         case DRM_FORMAT_ABGR8888:
8810                 /* checked in intel_framebuffer_init already */
8811                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
8812                         return -EINVAL;
8813         case DRM_FORMAT_XRGB8888:
8814         case DRM_FORMAT_ARGB8888:
8815                 bpp = 8*3;
8816                 break;
8817         case DRM_FORMAT_XRGB2101010:
8818         case DRM_FORMAT_ARGB2101010:
8819         case DRM_FORMAT_XBGR2101010:
8820         case DRM_FORMAT_ABGR2101010:
8821                 /* checked in intel_framebuffer_init already */
8822                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
8823                         return -EINVAL;
8824                 bpp = 10*3;
8825                 break;
8826         /* TODO: gen4+ supports 16 bpc floating point, too. */
8827         default:
8828                 DRM_DEBUG_KMS("unsupported depth\n");
8829                 return -EINVAL;
8830         }
8831
8832         pipe_config->pipe_bpp = bpp;
8833
8834         /* Clamp display bpp to EDID value */
8835         list_for_each_entry(connector, &dev->mode_config.connector_list,
8836                             base.head) {
8837                 if (!connector->new_encoder ||
8838                     connector->new_encoder->new_crtc != crtc)
8839                         continue;
8840
8841                 connected_sink_compute_bpp(connector, pipe_config);
8842         }
8843
8844         return bpp;
8845 }
8846
8847 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
8848 {
8849         DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
8850                         "type: 0x%x flags: 0x%x\n",
8851                 mode->crtc_clock,
8852                 mode->crtc_hdisplay, mode->crtc_hsync_start,
8853                 mode->crtc_hsync_end, mode->crtc_htotal,
8854                 mode->crtc_vdisplay, mode->crtc_vsync_start,
8855                 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
8856 }
8857
8858 static void intel_dump_pipe_config(struct intel_crtc *crtc,
8859                                    struct intel_crtc_config *pipe_config,
8860                                    const char *context)
8861 {
8862         DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
8863                       context, pipe_name(crtc->pipe));
8864
8865         DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
8866         DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
8867                       pipe_config->pipe_bpp, pipe_config->dither);
8868         DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
8869                       pipe_config->has_pch_encoder,
8870                       pipe_config->fdi_lanes,
8871                       pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
8872                       pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
8873                       pipe_config->fdi_m_n.tu);
8874         DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
8875                       pipe_config->has_dp_encoder,
8876                       pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
8877                       pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
8878                       pipe_config->dp_m_n.tu);
8879         DRM_DEBUG_KMS("requested mode:\n");
8880         drm_mode_debug_printmodeline(&pipe_config->requested_mode);
8881         DRM_DEBUG_KMS("adjusted mode:\n");
8882         drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
8883         intel_dump_crtc_timings(&pipe_config->adjusted_mode);
8884         DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
8885         DRM_DEBUG_KMS("pipe src size: %dx%d\n",
8886                       pipe_config->pipe_src_w, pipe_config->pipe_src_h);
8887         DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
8888                       pipe_config->gmch_pfit.control,
8889                       pipe_config->gmch_pfit.pgm_ratios,
8890                       pipe_config->gmch_pfit.lvds_border_bits);
8891         DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
8892                       pipe_config->pch_pfit.pos,
8893                       pipe_config->pch_pfit.size,
8894                       pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
8895         DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
8896         DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
8897 }
8898
8899 static bool check_encoder_cloning(struct drm_crtc *crtc)
8900 {
8901         int num_encoders = 0;
8902         bool uncloneable_encoders = false;
8903         struct intel_encoder *encoder;
8904
8905         list_for_each_entry(encoder, &crtc->dev->mode_config.encoder_list,
8906                             base.head) {
8907                 if (&encoder->new_crtc->base != crtc)
8908                         continue;
8909
8910                 num_encoders++;
8911                 if (!encoder->cloneable)
8912                         uncloneable_encoders = true;
8913         }
8914
8915         return !(num_encoders > 1 && uncloneable_encoders);
8916 }
8917
8918 static struct intel_crtc_config *
8919 intel_modeset_pipe_config(struct drm_crtc *crtc,
8920                           struct drm_framebuffer *fb,
8921                           struct drm_display_mode *mode)
8922 {
8923         struct drm_device *dev = crtc->dev;
8924         struct intel_encoder *encoder;
8925         struct intel_crtc_config *pipe_config;
8926         int plane_bpp, ret = -EINVAL;
8927         bool retry = true;
8928
8929         if (!check_encoder_cloning(crtc)) {
8930                 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
8931                 return ERR_PTR(-EINVAL);
8932         }
8933
8934         pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
8935         if (!pipe_config)
8936                 return ERR_PTR(-ENOMEM);
8937
8938         drm_mode_copy(&pipe_config->adjusted_mode, mode);
8939         drm_mode_copy(&pipe_config->requested_mode, mode);
8940
8941         pipe_config->cpu_transcoder =
8942                 (enum transcoder) to_intel_crtc(crtc)->pipe;
8943         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
8944
8945         /*
8946          * Sanitize sync polarity flags based on requested ones. If neither
8947          * positive or negative polarity is requested, treat this as meaning
8948          * negative polarity.
8949          */
8950         if (!(pipe_config->adjusted_mode.flags &
8951               (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
8952                 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
8953
8954         if (!(pipe_config->adjusted_mode.flags &
8955               (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
8956                 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
8957
8958         /* Compute a starting value for pipe_config->pipe_bpp taking the source
8959          * plane pixel format and any sink constraints into account. Returns the
8960          * source plane bpp so that dithering can be selected on mismatches
8961          * after encoders and crtc also have had their say. */
8962         plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
8963                                               fb, pipe_config);
8964         if (plane_bpp < 0)
8965                 goto fail;
8966
8967         /*
8968          * Determine the real pipe dimensions. Note that stereo modes can
8969          * increase the actual pipe size due to the frame doubling and
8970          * insertion of additional space for blanks between the frame. This
8971          * is stored in the crtc timings. We use the requested mode to do this
8972          * computation to clearly distinguish it from the adjusted mode, which
8973          * can be changed by the connectors in the below retry loop.
8974          */
8975         drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
8976         pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
8977         pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
8978
8979 encoder_retry:
8980         /* Ensure the port clock defaults are reset when retrying. */
8981         pipe_config->port_clock = 0;
8982         pipe_config->pixel_multiplier = 1;
8983
8984         /* Fill in default crtc timings, allow encoders to overwrite them. */
8985         drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, CRTC_STEREO_DOUBLE);
8986
8987         /* Pass our mode to the connectors and the CRTC to give them a chance to
8988          * adjust it according to limitations or connector properties, and also
8989          * a chance to reject the mode entirely.
8990          */
8991         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8992                             base.head) {
8993
8994                 if (&encoder->new_crtc->base != crtc)
8995                         continue;
8996
8997                 if (!(encoder->compute_config(encoder, pipe_config))) {
8998                         DRM_DEBUG_KMS("Encoder config failure\n");
8999                         goto fail;
9000                 }
9001         }
9002
9003         /* Set default port clock if not overwritten by the encoder. Needs to be
9004          * done afterwards in case the encoder adjusts the mode. */
9005         if (!pipe_config->port_clock)
9006                 pipe_config->port_clock = pipe_config->adjusted_mode.crtc_clock
9007                         * pipe_config->pixel_multiplier;
9008
9009         ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
9010         if (ret < 0) {
9011                 DRM_DEBUG_KMS("CRTC fixup failed\n");
9012                 goto fail;
9013         }
9014
9015         if (ret == RETRY) {
9016                 if (WARN(!retry, "loop in pipe configuration computation\n")) {
9017                         ret = -EINVAL;
9018                         goto fail;
9019                 }
9020
9021                 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
9022                 retry = false;
9023                 goto encoder_retry;
9024         }
9025
9026         pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
9027         DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
9028                       plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
9029
9030         return pipe_config;
9031 fail:
9032         kfree(pipe_config);
9033         return ERR_PTR(ret);
9034 }
9035
9036 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
9037  * simplicity we use the crtc's pipe number (because it's easier to obtain). */
9038 static void
9039 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
9040                              unsigned *prepare_pipes, unsigned *disable_pipes)
9041 {
9042         struct intel_crtc *intel_crtc;
9043         struct drm_device *dev = crtc->dev;
9044         struct intel_encoder *encoder;
9045         struct intel_connector *connector;
9046         struct drm_crtc *tmp_crtc;
9047
9048         *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
9049
9050         /* Check which crtcs have changed outputs connected to them, these need
9051          * to be part of the prepare_pipes mask. We don't (yet) support global
9052          * modeset across multiple crtcs, so modeset_pipes will only have one
9053          * bit set at most. */
9054         list_for_each_entry(connector, &dev->mode_config.connector_list,
9055                             base.head) {
9056                 if (connector->base.encoder == &connector->new_encoder->base)
9057                         continue;
9058
9059                 if (connector->base.encoder) {
9060                         tmp_crtc = connector->base.encoder->crtc;
9061
9062                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9063                 }
9064
9065                 if (connector->new_encoder)
9066                         *prepare_pipes |=
9067                                 1 << connector->new_encoder->new_crtc->pipe;
9068         }
9069
9070         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9071                             base.head) {
9072                 if (encoder->base.crtc == &encoder->new_crtc->base)
9073                         continue;
9074
9075                 if (encoder->base.crtc) {
9076                         tmp_crtc = encoder->base.crtc;
9077
9078                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9079                 }
9080
9081                 if (encoder->new_crtc)
9082                         *prepare_pipes |= 1 << encoder->new_crtc->pipe;
9083         }
9084
9085         /* Check for any pipes that will be fully disabled ... */
9086         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9087                             base.head) {
9088                 bool used = false;
9089
9090                 /* Don't try to disable disabled crtcs. */
9091                 if (!intel_crtc->base.enabled)
9092                         continue;
9093
9094                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9095                                     base.head) {
9096                         if (encoder->new_crtc == intel_crtc)
9097                                 used = true;
9098                 }
9099
9100                 if (!used)
9101                         *disable_pipes |= 1 << intel_crtc->pipe;
9102         }
9103
9104
9105         /* set_mode is also used to update properties on life display pipes. */
9106         intel_crtc = to_intel_crtc(crtc);
9107         if (crtc->enabled)
9108                 *prepare_pipes |= 1 << intel_crtc->pipe;
9109
9110         /*
9111          * For simplicity do a full modeset on any pipe where the output routing
9112          * changed. We could be more clever, but that would require us to be
9113          * more careful with calling the relevant encoder->mode_set functions.
9114          */
9115         if (*prepare_pipes)
9116                 *modeset_pipes = *prepare_pipes;
9117
9118         /* ... and mask these out. */
9119         *modeset_pipes &= ~(*disable_pipes);
9120         *prepare_pipes &= ~(*disable_pipes);
9121
9122         /*
9123          * HACK: We don't (yet) fully support global modesets. intel_set_config
9124          * obies this rule, but the modeset restore mode of
9125          * intel_modeset_setup_hw_state does not.
9126          */
9127         *modeset_pipes &= 1 << intel_crtc->pipe;
9128         *prepare_pipes &= 1 << intel_crtc->pipe;
9129
9130         DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
9131                       *modeset_pipes, *prepare_pipes, *disable_pipes);
9132 }
9133
9134 static bool intel_crtc_in_use(struct drm_crtc *crtc)
9135 {
9136         struct drm_encoder *encoder;
9137         struct drm_device *dev = crtc->dev;
9138
9139         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
9140                 if (encoder->crtc == crtc)
9141                         return true;
9142
9143         return false;
9144 }
9145
9146 static void
9147 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
9148 {
9149         struct intel_encoder *intel_encoder;
9150         struct intel_crtc *intel_crtc;
9151         struct drm_connector *connector;
9152
9153         list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
9154                             base.head) {
9155                 if (!intel_encoder->base.crtc)
9156                         continue;
9157
9158                 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
9159
9160                 if (prepare_pipes & (1 << intel_crtc->pipe))
9161                         intel_encoder->connectors_active = false;
9162         }
9163
9164         intel_modeset_commit_output_state(dev);
9165
9166         /* Update computed state. */
9167         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9168                             base.head) {
9169                 intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
9170         }
9171
9172         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
9173                 if (!connector->encoder || !connector->encoder->crtc)
9174                         continue;
9175
9176                 intel_crtc = to_intel_crtc(connector->encoder->crtc);
9177
9178                 if (prepare_pipes & (1 << intel_crtc->pipe)) {
9179                         struct drm_property *dpms_property =
9180                                 dev->mode_config.dpms_property;
9181
9182                         connector->dpms = DRM_MODE_DPMS_ON;
9183                         drm_object_property_set_value(&connector->base,
9184                                                          dpms_property,
9185                                                          DRM_MODE_DPMS_ON);
9186
9187                         intel_encoder = to_intel_encoder(connector->encoder);
9188                         intel_encoder->connectors_active = true;
9189                 }
9190         }
9191
9192 }
9193
9194 static bool intel_fuzzy_clock_check(int clock1, int clock2)
9195 {
9196         int diff;
9197
9198         if (clock1 == clock2)
9199                 return true;
9200
9201         if (!clock1 || !clock2)
9202                 return false;
9203
9204         diff = abs(clock1 - clock2);
9205
9206         if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
9207                 return true;
9208
9209         return false;
9210 }
9211
9212 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
9213         list_for_each_entry((intel_crtc), \
9214                             &(dev)->mode_config.crtc_list, \
9215                             base.head) \
9216                 if (mask & (1 <<(intel_crtc)->pipe))
9217
9218 static bool
9219 intel_pipe_config_compare(struct drm_device *dev,
9220                           struct intel_crtc_config *current_config,
9221                           struct intel_crtc_config *pipe_config)
9222 {
9223 #define PIPE_CONF_CHECK_X(name) \
9224         if (current_config->name != pipe_config->name) { \
9225                 DRM_ERROR("mismatch in " #name " " \
9226                           "(expected 0x%08x, found 0x%08x)\n", \
9227                           current_config->name, \
9228                           pipe_config->name); \
9229                 return false; \
9230         }
9231
9232 #define PIPE_CONF_CHECK_I(name) \
9233         if (current_config->name != pipe_config->name) { \
9234                 DRM_ERROR("mismatch in " #name " " \
9235                           "(expected %i, found %i)\n", \
9236                           current_config->name, \
9237                           pipe_config->name); \
9238                 return false; \
9239         }
9240
9241 #define PIPE_CONF_CHECK_FLAGS(name, mask)       \
9242         if ((current_config->name ^ pipe_config->name) & (mask)) { \
9243                 DRM_ERROR("mismatch in " #name "(" #mask ") "      \
9244                           "(expected %i, found %i)\n", \
9245                           current_config->name & (mask), \
9246                           pipe_config->name & (mask)); \
9247                 return false; \
9248         }
9249
9250 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
9251         if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
9252                 DRM_ERROR("mismatch in " #name " " \
9253                           "(expected %i, found %i)\n", \
9254                           current_config->name, \
9255                           pipe_config->name); \
9256                 return false; \
9257         }
9258
9259 #define PIPE_CONF_QUIRK(quirk)  \
9260         ((current_config->quirks | pipe_config->quirks) & (quirk))
9261
9262         PIPE_CONF_CHECK_I(cpu_transcoder);
9263
9264         PIPE_CONF_CHECK_I(has_pch_encoder);
9265         PIPE_CONF_CHECK_I(fdi_lanes);
9266         PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
9267         PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
9268         PIPE_CONF_CHECK_I(fdi_m_n.link_m);
9269         PIPE_CONF_CHECK_I(fdi_m_n.link_n);
9270         PIPE_CONF_CHECK_I(fdi_m_n.tu);
9271
9272         PIPE_CONF_CHECK_I(has_dp_encoder);
9273         PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
9274         PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
9275         PIPE_CONF_CHECK_I(dp_m_n.link_m);
9276         PIPE_CONF_CHECK_I(dp_m_n.link_n);
9277         PIPE_CONF_CHECK_I(dp_m_n.tu);
9278
9279         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
9280         PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
9281         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
9282         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
9283         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
9284         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
9285
9286         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
9287         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
9288         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
9289         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
9290         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
9291         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
9292
9293         PIPE_CONF_CHECK_I(pixel_multiplier);
9294
9295         PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9296                               DRM_MODE_FLAG_INTERLACE);
9297
9298         if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
9299                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9300                                       DRM_MODE_FLAG_PHSYNC);
9301                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9302                                       DRM_MODE_FLAG_NHSYNC);
9303                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9304                                       DRM_MODE_FLAG_PVSYNC);
9305                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9306                                       DRM_MODE_FLAG_NVSYNC);
9307         }
9308
9309         PIPE_CONF_CHECK_I(pipe_src_w);
9310         PIPE_CONF_CHECK_I(pipe_src_h);
9311
9312         PIPE_CONF_CHECK_I(gmch_pfit.control);
9313         /* pfit ratios are autocomputed by the hw on gen4+ */
9314         if (INTEL_INFO(dev)->gen < 4)
9315                 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
9316         PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
9317         PIPE_CONF_CHECK_I(pch_pfit.enabled);
9318         if (current_config->pch_pfit.enabled) {
9319                 PIPE_CONF_CHECK_I(pch_pfit.pos);
9320                 PIPE_CONF_CHECK_I(pch_pfit.size);
9321         }
9322
9323         PIPE_CONF_CHECK_I(ips_enabled);
9324
9325         PIPE_CONF_CHECK_I(double_wide);
9326
9327         PIPE_CONF_CHECK_I(shared_dpll);
9328         PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
9329         PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
9330         PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
9331         PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
9332
9333         if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
9334                 PIPE_CONF_CHECK_I(pipe_bpp);
9335
9336         if (!IS_HASWELL(dev)) {
9337                 PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock);
9338                 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
9339         }
9340
9341 #undef PIPE_CONF_CHECK_X
9342 #undef PIPE_CONF_CHECK_I
9343 #undef PIPE_CONF_CHECK_FLAGS
9344 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
9345 #undef PIPE_CONF_QUIRK
9346
9347         return true;
9348 }
9349
9350 static void
9351 check_connector_state(struct drm_device *dev)
9352 {
9353         struct intel_connector *connector;
9354
9355         list_for_each_entry(connector, &dev->mode_config.connector_list,
9356                             base.head) {
9357                 /* This also checks the encoder/connector hw state with the
9358                  * ->get_hw_state callbacks. */
9359                 intel_connector_check_state(connector);
9360
9361                 WARN(&connector->new_encoder->base != connector->base.encoder,
9362                      "connector's staged encoder doesn't match current encoder\n");
9363         }
9364 }
9365
9366 static void
9367 check_encoder_state(struct drm_device *dev)
9368 {
9369         struct intel_encoder *encoder;
9370         struct intel_connector *connector;
9371
9372         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9373                             base.head) {
9374                 bool enabled = false;
9375                 bool active = false;
9376                 enum pipe pipe, tracked_pipe;
9377
9378                 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
9379                               encoder->base.base.id,
9380                               drm_get_encoder_name(&encoder->base));
9381
9382                 WARN(&encoder->new_crtc->base != encoder->base.crtc,
9383                      "encoder's stage crtc doesn't match current crtc\n");
9384                 WARN(encoder->connectors_active && !encoder->base.crtc,
9385                      "encoder's active_connectors set, but no crtc\n");
9386
9387                 list_for_each_entry(connector, &dev->mode_config.connector_list,
9388                                     base.head) {
9389                         if (connector->base.encoder != &encoder->base)
9390                                 continue;
9391                         enabled = true;
9392                         if (connector->base.dpms != DRM_MODE_DPMS_OFF)
9393                                 active = true;
9394                 }
9395                 WARN(!!encoder->base.crtc != enabled,
9396                      "encoder's enabled state mismatch "
9397                      "(expected %i, found %i)\n",
9398                      !!encoder->base.crtc, enabled);
9399                 WARN(active && !encoder->base.crtc,
9400                      "active encoder with no crtc\n");
9401
9402                 WARN(encoder->connectors_active != active,
9403                      "encoder's computed active state doesn't match tracked active state "
9404                      "(expected %i, found %i)\n", active, encoder->connectors_active);
9405
9406                 active = encoder->get_hw_state(encoder, &pipe);
9407                 WARN(active != encoder->connectors_active,
9408                      "encoder's hw state doesn't match sw tracking "
9409                      "(expected %i, found %i)\n",
9410                      encoder->connectors_active, active);
9411
9412                 if (!encoder->base.crtc)
9413                         continue;
9414
9415                 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
9416                 WARN(active && pipe != tracked_pipe,
9417                      "active encoder's pipe doesn't match"
9418                      "(expected %i, found %i)\n",
9419                      tracked_pipe, pipe);
9420
9421         }
9422 }
9423
9424 static void
9425 check_crtc_state(struct drm_device *dev)
9426 {
9427         drm_i915_private_t *dev_priv = dev->dev_private;
9428         struct intel_crtc *crtc;
9429         struct intel_encoder *encoder;
9430         struct intel_crtc_config pipe_config;
9431
9432         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9433                             base.head) {
9434                 bool enabled = false;
9435                 bool active = false;
9436
9437                 memset(&pipe_config, 0, sizeof(pipe_config));
9438
9439                 DRM_DEBUG_KMS("[CRTC:%d]\n",
9440                               crtc->base.base.id);
9441
9442                 WARN(crtc->active && !crtc->base.enabled,
9443                      "active crtc, but not enabled in sw tracking\n");
9444
9445                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9446                                     base.head) {
9447                         if (encoder->base.crtc != &crtc->base)
9448                                 continue;
9449                         enabled = true;
9450                         if (encoder->connectors_active)
9451                                 active = true;
9452                 }
9453
9454                 WARN(active != crtc->active,
9455                      "crtc's computed active state doesn't match tracked active state "
9456                      "(expected %i, found %i)\n", active, crtc->active);
9457                 WARN(enabled != crtc->base.enabled,
9458                      "crtc's computed enabled state doesn't match tracked enabled state "
9459                      "(expected %i, found %i)\n", enabled, crtc->base.enabled);
9460
9461                 active = dev_priv->display.get_pipe_config(crtc,
9462                                                            &pipe_config);
9463
9464                 /* hw state is inconsistent with the pipe A quirk */
9465                 if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
9466                         active = crtc->active;
9467
9468                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9469                                     base.head) {
9470                         enum pipe pipe;
9471                         if (encoder->base.crtc != &crtc->base)
9472                                 continue;
9473                         if (encoder->get_hw_state(encoder, &pipe))
9474                                 encoder->get_config(encoder, &pipe_config);
9475                 }
9476
9477                 WARN(crtc->active != active,
9478                      "crtc active state doesn't match with hw state "
9479                      "(expected %i, found %i)\n", crtc->active, active);
9480
9481                 if (active &&
9482                     !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
9483                         WARN(1, "pipe state doesn't match!\n");
9484                         intel_dump_pipe_config(crtc, &pipe_config,
9485                                                "[hw state]");
9486                         intel_dump_pipe_config(crtc, &crtc->config,
9487                                                "[sw state]");
9488                 }
9489         }
9490 }
9491
9492 static void
9493 check_shared_dpll_state(struct drm_device *dev)
9494 {
9495         drm_i915_private_t *dev_priv = dev->dev_private;
9496         struct intel_crtc *crtc;
9497         struct intel_dpll_hw_state dpll_hw_state;
9498         int i;
9499
9500         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
9501                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
9502                 int enabled_crtcs = 0, active_crtcs = 0;
9503                 bool active;
9504
9505                 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
9506
9507                 DRM_DEBUG_KMS("%s\n", pll->name);
9508
9509                 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
9510
9511                 WARN(pll->active > pll->refcount,
9512                      "more active pll users than references: %i vs %i\n",
9513                      pll->active, pll->refcount);
9514                 WARN(pll->active && !pll->on,
9515                      "pll in active use but not on in sw tracking\n");
9516                 WARN(pll->on && !pll->active,
9517                      "pll in on but not on in use in sw tracking\n");
9518                 WARN(pll->on != active,
9519                      "pll on state mismatch (expected %i, found %i)\n",
9520                      pll->on, active);
9521
9522                 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9523                                     base.head) {
9524                         if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
9525                                 enabled_crtcs++;
9526                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
9527                                 active_crtcs++;
9528                 }
9529                 WARN(pll->active != active_crtcs,
9530                      "pll active crtcs mismatch (expected %i, found %i)\n",
9531                      pll->active, active_crtcs);
9532                 WARN(pll->refcount != enabled_crtcs,
9533                      "pll enabled crtcs mismatch (expected %i, found %i)\n",
9534                      pll->refcount, enabled_crtcs);
9535
9536                 WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
9537                                        sizeof(dpll_hw_state)),
9538                      "pll hw state mismatch\n");
9539         }
9540 }
9541
9542 void
9543 intel_modeset_check_state(struct drm_device *dev)
9544 {
9545         check_connector_state(dev);
9546         check_encoder_state(dev);
9547         check_crtc_state(dev);
9548         check_shared_dpll_state(dev);
9549 }
9550
9551 void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
9552                                      int dotclock)
9553 {
9554         /*
9555          * FDI already provided one idea for the dotclock.
9556          * Yell if the encoder disagrees.
9557          */
9558         WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.crtc_clock, dotclock),
9559              "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
9560              pipe_config->adjusted_mode.crtc_clock, dotclock);
9561 }
9562
9563 static int __intel_set_mode(struct drm_crtc *crtc,
9564                             struct drm_display_mode *mode,
9565                             int x, int y, struct drm_framebuffer *fb)
9566 {
9567         struct drm_device *dev = crtc->dev;
9568         drm_i915_private_t *dev_priv = dev->dev_private;
9569         struct drm_display_mode *saved_mode, *saved_hwmode;
9570         struct intel_crtc_config *pipe_config = NULL;
9571         struct intel_crtc *intel_crtc;
9572         unsigned disable_pipes, prepare_pipes, modeset_pipes;
9573         int ret = 0;
9574
9575         saved_mode = kcalloc(2, sizeof(*saved_mode), GFP_KERNEL);
9576         if (!saved_mode)
9577                 return -ENOMEM;
9578         saved_hwmode = saved_mode + 1;
9579
9580         intel_modeset_affected_pipes(crtc, &modeset_pipes,
9581                                      &prepare_pipes, &disable_pipes);
9582
9583         *saved_hwmode = crtc->hwmode;
9584         *saved_mode = crtc->mode;
9585
9586         /* Hack: Because we don't (yet) support global modeset on multiple
9587          * crtcs, we don't keep track of the new mode for more than one crtc.
9588          * Hence simply check whether any bit is set in modeset_pipes in all the
9589          * pieces of code that are not yet converted to deal with mutliple crtcs
9590          * changing their mode at the same time. */
9591         if (modeset_pipes) {
9592                 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
9593                 if (IS_ERR(pipe_config)) {
9594                         ret = PTR_ERR(pipe_config);
9595                         pipe_config = NULL;
9596
9597                         goto out;
9598                 }
9599                 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
9600                                        "[modeset]");
9601         }
9602
9603         /*
9604          * See if the config requires any additional preparation, e.g.
9605          * to adjust global state with pipes off.  We need to do this
9606          * here so we can get the modeset_pipe updated config for the new
9607          * mode set on this crtc.  For other crtcs we need to use the
9608          * adjusted_mode bits in the crtc directly.
9609          */
9610         if (IS_VALLEYVIEW(dev)) {
9611                 valleyview_modeset_global_pipes(dev, &prepare_pipes,
9612                                                 modeset_pipes, pipe_config);
9613
9614                 /* may have added more to prepare_pipes than we should */
9615                 prepare_pipes &= ~disable_pipes;
9616         }
9617
9618         for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
9619                 intel_crtc_disable(&intel_crtc->base);
9620
9621         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
9622                 if (intel_crtc->base.enabled)
9623                         dev_priv->display.crtc_disable(&intel_crtc->base);
9624         }
9625
9626         /* crtc->mode is already used by the ->mode_set callbacks, hence we need
9627          * to set it here already despite that we pass it down the callchain.
9628          */
9629         if (modeset_pipes) {
9630                 crtc->mode = *mode;
9631                 /* mode_set/enable/disable functions rely on a correct pipe
9632                  * config. */
9633                 to_intel_crtc(crtc)->config = *pipe_config;
9634         }
9635
9636         /* Only after disabling all output pipelines that will be changed can we
9637          * update the the output configuration. */
9638         intel_modeset_update_state(dev, prepare_pipes);
9639
9640         if (dev_priv->display.modeset_global_resources)
9641                 dev_priv->display.modeset_global_resources(dev);
9642
9643         /* Set up the DPLL and any encoders state that needs to adjust or depend
9644          * on the DPLL.
9645          */
9646         for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
9647                 ret = intel_crtc_mode_set(&intel_crtc->base,
9648                                           x, y, fb);
9649                 if (ret)
9650                         goto done;
9651         }
9652
9653         /* Now enable the clocks, plane, pipe, and connectors that we set up. */
9654         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
9655                 dev_priv->display.crtc_enable(&intel_crtc->base);
9656
9657         if (modeset_pipes) {
9658                 /* Store real post-adjustment hardware mode. */
9659                 crtc->hwmode = pipe_config->adjusted_mode;
9660
9661                 /* Calculate and store various constants which
9662                  * are later needed by vblank and swap-completion
9663                  * timestamping. They are derived from true hwmode.
9664                  */
9665                 drm_calc_timestamping_constants(crtc);
9666         }
9667
9668         /* FIXME: add subpixel order */
9669 done:
9670         if (ret && crtc->enabled) {
9671                 crtc->hwmode = *saved_hwmode;
9672                 crtc->mode = *saved_mode;
9673         }
9674
9675 out:
9676         kfree(pipe_config);
9677         kfree(saved_mode);
9678         return ret;
9679 }
9680
9681 static int intel_set_mode(struct drm_crtc *crtc,
9682                           struct drm_display_mode *mode,
9683                           int x, int y, struct drm_framebuffer *fb)
9684 {
9685         int ret;
9686
9687         ret = __intel_set_mode(crtc, mode, x, y, fb);
9688
9689         if (ret == 0)
9690                 intel_modeset_check_state(crtc->dev);
9691
9692         return ret;
9693 }
9694
9695 void intel_crtc_restore_mode(struct drm_crtc *crtc)
9696 {
9697         intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
9698 }
9699
9700 #undef for_each_intel_crtc_masked
9701
9702 static void intel_set_config_free(struct intel_set_config *config)
9703 {
9704         if (!config)
9705                 return;
9706
9707         kfree(config->save_connector_encoders);
9708         kfree(config->save_encoder_crtcs);
9709         kfree(config);
9710 }
9711
9712 static int intel_set_config_save_state(struct drm_device *dev,
9713                                        struct intel_set_config *config)
9714 {
9715         struct drm_encoder *encoder;
9716         struct drm_connector *connector;
9717         int count;
9718
9719         config->save_encoder_crtcs =
9720                 kcalloc(dev->mode_config.num_encoder,
9721                         sizeof(struct drm_crtc *), GFP_KERNEL);
9722         if (!config->save_encoder_crtcs)
9723                 return -ENOMEM;
9724
9725         config->save_connector_encoders =
9726                 kcalloc(dev->mode_config.num_connector,
9727                         sizeof(struct drm_encoder *), GFP_KERNEL);
9728         if (!config->save_connector_encoders)
9729                 return -ENOMEM;
9730
9731         /* Copy data. Note that driver private data is not affected.
9732          * Should anything bad happen only the expected state is
9733          * restored, not the drivers personal bookkeeping.
9734          */
9735         count = 0;
9736         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
9737                 config->save_encoder_crtcs[count++] = encoder->crtc;
9738         }
9739
9740         count = 0;
9741         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
9742                 config->save_connector_encoders[count++] = connector->encoder;
9743         }
9744
9745         return 0;
9746 }
9747
9748 static void intel_set_config_restore_state(struct drm_device *dev,
9749                                            struct intel_set_config *config)
9750 {
9751         struct intel_encoder *encoder;
9752         struct intel_connector *connector;
9753         int count;
9754
9755         count = 0;
9756         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
9757                 encoder->new_crtc =
9758                         to_intel_crtc(config->save_encoder_crtcs[count++]);
9759         }
9760
9761         count = 0;
9762         list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
9763                 connector->new_encoder =
9764                         to_intel_encoder(config->save_connector_encoders[count++]);
9765         }
9766 }
9767
9768 static bool
9769 is_crtc_connector_off(struct drm_mode_set *set)
9770 {
9771         int i;
9772
9773         if (set->num_connectors == 0)
9774                 return false;
9775
9776         if (WARN_ON(set->connectors == NULL))
9777                 return false;
9778
9779         for (i = 0; i < set->num_connectors; i++)
9780                 if (set->connectors[i]->encoder &&
9781                     set->connectors[i]->encoder->crtc == set->crtc &&
9782                     set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
9783                         return true;
9784
9785         return false;
9786 }
9787
9788 static void
9789 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
9790                                       struct intel_set_config *config)
9791 {
9792
9793         /* We should be able to check here if the fb has the same properties
9794          * and then just flip_or_move it */
9795         if (is_crtc_connector_off(set)) {
9796                 config->mode_changed = true;
9797         } else if (set->crtc->fb != set->fb) {
9798                 /* If we have no fb then treat it as a full mode set */
9799                 if (set->crtc->fb == NULL) {
9800                         struct intel_crtc *intel_crtc =
9801                                 to_intel_crtc(set->crtc);
9802
9803                         if (intel_crtc->active && i915_fastboot) {
9804                                 DRM_DEBUG_KMS("crtc has no fb, will flip\n");
9805                                 config->fb_changed = true;
9806                         } else {
9807                                 DRM_DEBUG_KMS("inactive crtc, full mode set\n");
9808                                 config->mode_changed = true;
9809                         }
9810                 } else if (set->fb == NULL) {
9811                         config->mode_changed = true;
9812                 } else if (set->fb->pixel_format !=
9813                            set->crtc->fb->pixel_format) {
9814                         config->mode_changed = true;
9815                 } else {
9816                         config->fb_changed = true;
9817                 }
9818         }
9819
9820         if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
9821                 config->fb_changed = true;
9822
9823         if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
9824                 DRM_DEBUG_KMS("modes are different, full mode set\n");
9825                 drm_mode_debug_printmodeline(&set->crtc->mode);
9826                 drm_mode_debug_printmodeline(set->mode);
9827                 config->mode_changed = true;
9828         }
9829
9830         DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
9831                         set->crtc->base.id, config->mode_changed, config->fb_changed);
9832 }
9833
9834 static int
9835 intel_modeset_stage_output_state(struct drm_device *dev,
9836                                  struct drm_mode_set *set,
9837                                  struct intel_set_config *config)
9838 {
9839         struct drm_crtc *new_crtc;
9840         struct intel_connector *connector;
9841         struct intel_encoder *encoder;
9842         int ro;
9843
9844         /* The upper layers ensure that we either disable a crtc or have a list
9845          * of connectors. For paranoia, double-check this. */
9846         WARN_ON(!set->fb && (set->num_connectors != 0));
9847         WARN_ON(set->fb && (set->num_connectors == 0));
9848
9849         list_for_each_entry(connector, &dev->mode_config.connector_list,
9850                             base.head) {
9851                 /* Otherwise traverse passed in connector list and get encoders
9852                  * for them. */
9853                 for (ro = 0; ro < set->num_connectors; ro++) {
9854                         if (set->connectors[ro] == &connector->base) {
9855                                 connector->new_encoder = connector->encoder;
9856                                 break;
9857                         }
9858                 }
9859
9860                 /* If we disable the crtc, disable all its connectors. Also, if
9861                  * the connector is on the changing crtc but not on the new
9862                  * connector list, disable it. */
9863                 if ((!set->fb || ro == set->num_connectors) &&
9864                     connector->base.encoder &&
9865                     connector->base.encoder->crtc == set->crtc) {
9866                         connector->new_encoder = NULL;
9867
9868                         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
9869                                 connector->base.base.id,
9870                                 drm_get_connector_name(&connector->base));
9871                 }
9872
9873
9874                 if (&connector->new_encoder->base != connector->base.encoder) {
9875                         DRM_DEBUG_KMS("encoder changed, full mode switch\n");
9876                         config->mode_changed = true;
9877                 }
9878         }
9879         /* connector->new_encoder is now updated for all connectors. */
9880
9881         /* Update crtc of enabled connectors. */
9882         list_for_each_entry(connector, &dev->mode_config.connector_list,
9883                             base.head) {
9884                 if (!connector->new_encoder)
9885                         continue;
9886
9887                 new_crtc = connector->new_encoder->base.crtc;
9888
9889                 for (ro = 0; ro < set->num_connectors; ro++) {
9890                         if (set->connectors[ro] == &connector->base)
9891                                 new_crtc = set->crtc;
9892                 }
9893
9894                 /* Make sure the new CRTC will work with the encoder */
9895                 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
9896                                            new_crtc)) {
9897                         return -EINVAL;
9898                 }
9899                 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
9900
9901                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
9902                         connector->base.base.id,
9903                         drm_get_connector_name(&connector->base),
9904                         new_crtc->base.id);
9905         }
9906
9907         /* Check for any encoders that needs to be disabled. */
9908         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9909                             base.head) {
9910                 list_for_each_entry(connector,
9911                                     &dev->mode_config.connector_list,
9912                                     base.head) {
9913                         if (connector->new_encoder == encoder) {
9914                                 WARN_ON(!connector->new_encoder->new_crtc);
9915
9916                                 goto next_encoder;
9917                         }
9918                 }
9919                 encoder->new_crtc = NULL;
9920 next_encoder:
9921                 /* Only now check for crtc changes so we don't miss encoders
9922                  * that will be disabled. */
9923                 if (&encoder->new_crtc->base != encoder->base.crtc) {
9924                         DRM_DEBUG_KMS("crtc changed, full mode switch\n");
9925                         config->mode_changed = true;
9926                 }
9927         }
9928         /* Now we've also updated encoder->new_crtc for all encoders. */
9929
9930         return 0;
9931 }
9932
9933 static int intel_crtc_set_config(struct drm_mode_set *set)
9934 {
9935         struct drm_device *dev;
9936         struct drm_mode_set save_set;
9937         struct intel_set_config *config;
9938         int ret;
9939
9940         BUG_ON(!set);
9941         BUG_ON(!set->crtc);
9942         BUG_ON(!set->crtc->helper_private);
9943
9944         /* Enforce sane interface api - has been abused by the fb helper. */
9945         BUG_ON(!set->mode && set->fb);
9946         BUG_ON(set->fb && set->num_connectors == 0);
9947
9948         if (set->fb) {
9949                 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
9950                                 set->crtc->base.id, set->fb->base.id,
9951                                 (int)set->num_connectors, set->x, set->y);
9952         } else {
9953                 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
9954         }
9955
9956         dev = set->crtc->dev;
9957
9958         ret = -ENOMEM;
9959         config = kzalloc(sizeof(*config), GFP_KERNEL);
9960         if (!config)
9961                 goto out_config;
9962
9963         ret = intel_set_config_save_state(dev, config);
9964         if (ret)
9965                 goto out_config;
9966
9967         save_set.crtc = set->crtc;
9968         save_set.mode = &set->crtc->mode;
9969         save_set.x = set->crtc->x;
9970         save_set.y = set->crtc->y;
9971         save_set.fb = set->crtc->fb;
9972
9973         /* Compute whether we need a full modeset, only an fb base update or no
9974          * change at all. In the future we might also check whether only the
9975          * mode changed, e.g. for LVDS where we only change the panel fitter in
9976          * such cases. */
9977         intel_set_config_compute_mode_changes(set, config);
9978
9979         ret = intel_modeset_stage_output_state(dev, set, config);
9980         if (ret)
9981                 goto fail;
9982
9983         if (config->mode_changed) {
9984                 ret = intel_set_mode(set->crtc, set->mode,
9985                                      set->x, set->y, set->fb);
9986         } else if (config->fb_changed) {
9987                 intel_crtc_wait_for_pending_flips(set->crtc);
9988
9989                 ret = intel_pipe_set_base(set->crtc,
9990                                           set->x, set->y, set->fb);
9991         }
9992
9993         if (ret) {
9994                 DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
9995                               set->crtc->base.id, ret);
9996 fail:
9997                 intel_set_config_restore_state(dev, config);
9998
9999                 /* Try to restore the config */
10000                 if (config->mode_changed &&
10001                     intel_set_mode(save_set.crtc, save_set.mode,
10002                                    save_set.x, save_set.y, save_set.fb))
10003                         DRM_ERROR("failed to restore config after modeset failure\n");
10004         }
10005
10006 out_config:
10007         intel_set_config_free(config);
10008         return ret;
10009 }
10010
10011 static const struct drm_crtc_funcs intel_crtc_funcs = {
10012         .cursor_set = intel_crtc_cursor_set,
10013         .cursor_move = intel_crtc_cursor_move,
10014         .gamma_set = intel_crtc_gamma_set,
10015         .set_config = intel_crtc_set_config,
10016         .destroy = intel_crtc_destroy,
10017         .page_flip = intel_crtc_page_flip,
10018 };
10019
10020 static void intel_cpu_pll_init(struct drm_device *dev)
10021 {
10022         if (HAS_DDI(dev))
10023                 intel_ddi_pll_init(dev);
10024 }
10025
10026 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
10027                                       struct intel_shared_dpll *pll,
10028                                       struct intel_dpll_hw_state *hw_state)
10029 {
10030         uint32_t val;
10031
10032         val = I915_READ(PCH_DPLL(pll->id));
10033         hw_state->dpll = val;
10034         hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
10035         hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
10036
10037         return val & DPLL_VCO_ENABLE;
10038 }
10039
10040 static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
10041                                   struct intel_shared_dpll *pll)
10042 {
10043         I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0);
10044         I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1);
10045 }
10046
10047 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
10048                                 struct intel_shared_dpll *pll)
10049 {
10050         /* PCH refclock must be enabled first */
10051         assert_pch_refclk_enabled(dev_priv);
10052
10053         I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10054
10055         /* Wait for the clocks to stabilize. */
10056         POSTING_READ(PCH_DPLL(pll->id));
10057         udelay(150);
10058
10059         /* The pixel multiplier can only be updated once the
10060          * DPLL is enabled and the clocks are stable.
10061          *
10062          * So write it again.
10063          */
10064         I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10065         POSTING_READ(PCH_DPLL(pll->id));
10066         udelay(200);
10067 }
10068
10069 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
10070                                  struct intel_shared_dpll *pll)
10071 {
10072         struct drm_device *dev = dev_priv->dev;
10073         struct intel_crtc *crtc;
10074
10075         /* Make sure no transcoder isn't still depending on us. */
10076         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
10077                 if (intel_crtc_to_shared_dpll(crtc) == pll)
10078                         assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
10079         }
10080
10081         I915_WRITE(PCH_DPLL(pll->id), 0);
10082         POSTING_READ(PCH_DPLL(pll->id));
10083         udelay(200);
10084 }
10085
10086 static char *ibx_pch_dpll_names[] = {
10087         "PCH DPLL A",
10088         "PCH DPLL B",
10089 };
10090
10091 static void ibx_pch_dpll_init(struct drm_device *dev)
10092 {
10093         struct drm_i915_private *dev_priv = dev->dev_private;
10094         int i;
10095
10096         dev_priv->num_shared_dpll = 2;
10097
10098         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
10099                 dev_priv->shared_dplls[i].id = i;
10100                 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
10101                 dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
10102                 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
10103                 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
10104                 dev_priv->shared_dplls[i].get_hw_state =
10105                         ibx_pch_dpll_get_hw_state;
10106         }
10107 }
10108
10109 static void intel_shared_dpll_init(struct drm_device *dev)
10110 {
10111         struct drm_i915_private *dev_priv = dev->dev_private;
10112
10113         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
10114                 ibx_pch_dpll_init(dev);
10115         else
10116                 dev_priv->num_shared_dpll = 0;
10117
10118         BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
10119         DRM_DEBUG_KMS("%i shared PLLs initialized\n",
10120                       dev_priv->num_shared_dpll);
10121 }
10122
10123 static void intel_crtc_init(struct drm_device *dev, int pipe)
10124 {
10125         drm_i915_private_t *dev_priv = dev->dev_private;
10126         struct intel_crtc *intel_crtc;
10127         int i;
10128
10129         intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
10130         if (intel_crtc == NULL)
10131                 return;
10132
10133         drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
10134
10135         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
10136         for (i = 0; i < 256; i++) {
10137                 intel_crtc->lut_r[i] = i;
10138                 intel_crtc->lut_g[i] = i;
10139                 intel_crtc->lut_b[i] = i;
10140         }
10141
10142         /*
10143          * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
10144          * is hooked to plane B. Hence we want plane A feeding pipe B.
10145          */
10146         intel_crtc->pipe = pipe;
10147         intel_crtc->plane = pipe;
10148         if (IS_MOBILE(dev) && INTEL_INFO(dev)->gen < 4) {
10149                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
10150                 intel_crtc->plane = !pipe;
10151         }
10152
10153         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
10154                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
10155         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
10156         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
10157
10158         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
10159 }
10160
10161 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
10162 {
10163         struct drm_encoder *encoder = connector->base.encoder;
10164
10165         WARN_ON(!mutex_is_locked(&connector->base.dev->mode_config.mutex));
10166
10167         if (!encoder)
10168                 return INVALID_PIPE;
10169
10170         return to_intel_crtc(encoder->crtc)->pipe;
10171 }
10172
10173 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
10174                                 struct drm_file *file)
10175 {
10176         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
10177         struct drm_mode_object *drmmode_obj;
10178         struct intel_crtc *crtc;
10179
10180         if (!drm_core_check_feature(dev, DRIVER_MODESET))
10181                 return -ENODEV;
10182
10183         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
10184                         DRM_MODE_OBJECT_CRTC);
10185
10186         if (!drmmode_obj) {
10187                 DRM_ERROR("no such CRTC id\n");
10188                 return -ENOENT;
10189         }
10190
10191         crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
10192         pipe_from_crtc_id->pipe = crtc->pipe;
10193
10194         return 0;
10195 }
10196
10197 static int intel_encoder_clones(struct intel_encoder *encoder)
10198 {
10199         struct drm_device *dev = encoder->base.dev;
10200         struct intel_encoder *source_encoder;
10201         int index_mask = 0;
10202         int entry = 0;
10203
10204         list_for_each_entry(source_encoder,
10205                             &dev->mode_config.encoder_list, base.head) {
10206
10207                 if (encoder == source_encoder)
10208                         index_mask |= (1 << entry);
10209
10210                 /* Intel hw has only one MUX where enocoders could be cloned. */
10211                 if (encoder->cloneable && source_encoder->cloneable)
10212                         index_mask |= (1 << entry);
10213
10214                 entry++;
10215         }
10216
10217         return index_mask;
10218 }
10219
10220 static bool has_edp_a(struct drm_device *dev)
10221 {
10222         struct drm_i915_private *dev_priv = dev->dev_private;
10223
10224         if (!IS_MOBILE(dev))
10225                 return false;
10226
10227         if ((I915_READ(DP_A) & DP_DETECTED) == 0)
10228                 return false;
10229
10230         if (IS_GEN5(dev) &&
10231             (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
10232                 return false;
10233
10234         return true;
10235 }
10236
10237 static void intel_setup_outputs(struct drm_device *dev)
10238 {
10239         struct drm_i915_private *dev_priv = dev->dev_private;
10240         struct intel_encoder *encoder;
10241         bool dpd_is_edp = false;
10242
10243         intel_lvds_init(dev);
10244
10245         if (!IS_ULT(dev))
10246                 intel_crt_init(dev);
10247
10248         if (HAS_DDI(dev)) {
10249                 int found;
10250
10251                 /* Haswell uses DDI functions to detect digital outputs */
10252                 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
10253                 /* DDI A only supports eDP */
10254                 if (found)
10255                         intel_ddi_init(dev, PORT_A);
10256
10257                 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
10258                  * register */
10259                 found = I915_READ(SFUSE_STRAP);
10260
10261                 if (found & SFUSE_STRAP_DDIB_DETECTED)
10262                         intel_ddi_init(dev, PORT_B);
10263                 if (found & SFUSE_STRAP_DDIC_DETECTED)
10264                         intel_ddi_init(dev, PORT_C);
10265                 if (found & SFUSE_STRAP_DDID_DETECTED)
10266                         intel_ddi_init(dev, PORT_D);
10267         } else if (HAS_PCH_SPLIT(dev)) {
10268                 int found;
10269                 dpd_is_edp = intel_dpd_is_edp(dev);
10270
10271                 if (has_edp_a(dev))
10272                         intel_dp_init(dev, DP_A, PORT_A);
10273
10274                 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
10275                         /* PCH SDVOB multiplex with HDMIB */
10276                         found = intel_sdvo_init(dev, PCH_SDVOB, true);
10277                         if (!found)
10278                                 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
10279                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
10280                                 intel_dp_init(dev, PCH_DP_B, PORT_B);
10281                 }
10282
10283                 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
10284                         intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
10285
10286                 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
10287                         intel_hdmi_init(dev, PCH_HDMID, PORT_D);
10288
10289                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
10290                         intel_dp_init(dev, PCH_DP_C, PORT_C);
10291
10292                 if (I915_READ(PCH_DP_D) & DP_DETECTED)
10293                         intel_dp_init(dev, PCH_DP_D, PORT_D);
10294         } else if (IS_VALLEYVIEW(dev)) {
10295                 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
10296                         intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
10297                                         PORT_B);
10298                         if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
10299                                 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
10300                 }
10301
10302                 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
10303                         intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
10304                                         PORT_C);
10305                         if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
10306                                 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C,
10307                                               PORT_C);
10308                 }
10309
10310                 intel_dsi_init(dev);
10311         } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
10312                 bool found = false;
10313
10314                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10315                         DRM_DEBUG_KMS("probing SDVOB\n");
10316                         found = intel_sdvo_init(dev, GEN3_SDVOB, true);
10317                         if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
10318                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
10319                                 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
10320                         }
10321
10322                         if (!found && SUPPORTS_INTEGRATED_DP(dev))
10323                                 intel_dp_init(dev, DP_B, PORT_B);
10324                 }
10325
10326                 /* Before G4X SDVOC doesn't have its own detect register */
10327
10328                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10329                         DRM_DEBUG_KMS("probing SDVOC\n");
10330                         found = intel_sdvo_init(dev, GEN3_SDVOC, false);
10331                 }
10332
10333                 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
10334
10335                         if (SUPPORTS_INTEGRATED_HDMI(dev)) {
10336                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
10337                                 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
10338                         }
10339                         if (SUPPORTS_INTEGRATED_DP(dev))
10340                                 intel_dp_init(dev, DP_C, PORT_C);
10341                 }
10342
10343                 if (SUPPORTS_INTEGRATED_DP(dev) &&
10344                     (I915_READ(DP_D) & DP_DETECTED))
10345                         intel_dp_init(dev, DP_D, PORT_D);
10346         } else if (IS_GEN2(dev))
10347                 intel_dvo_init(dev);
10348
10349         if (SUPPORTS_TV(dev))
10350                 intel_tv_init(dev);
10351
10352         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10353                 encoder->base.possible_crtcs = encoder->crtc_mask;
10354                 encoder->base.possible_clones =
10355                         intel_encoder_clones(encoder);
10356         }
10357
10358         intel_init_pch_refclk(dev);
10359
10360         drm_helper_move_panel_connectors_to_head(dev);
10361 }
10362
10363 void intel_framebuffer_fini(struct intel_framebuffer *fb)
10364 {
10365         drm_framebuffer_cleanup(&fb->base);
10366         WARN_ON(!fb->obj->framebuffer_references--);
10367         drm_gem_object_unreference_unlocked(&fb->obj->base);
10368 }
10369
10370 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
10371 {
10372         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10373
10374         intel_framebuffer_fini(intel_fb);
10375         kfree(intel_fb);
10376 }
10377
10378 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
10379                                                 struct drm_file *file,
10380                                                 unsigned int *handle)
10381 {
10382         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10383         struct drm_i915_gem_object *obj = intel_fb->obj;
10384
10385         return drm_gem_handle_create(file, &obj->base, handle);
10386 }
10387
10388 static const struct drm_framebuffer_funcs intel_fb_funcs = {
10389         .destroy = intel_user_framebuffer_destroy,
10390         .create_handle = intel_user_framebuffer_create_handle,
10391 };
10392
10393 int intel_framebuffer_init(struct drm_device *dev,
10394                            struct intel_framebuffer *intel_fb,
10395                            struct drm_mode_fb_cmd2 *mode_cmd,
10396                            struct drm_i915_gem_object *obj)
10397 {
10398         int aligned_height, tile_height;
10399         int pitch_limit;
10400         int ret;
10401
10402         WARN_ON(!mutex_is_locked(&dev->struct_mutex));
10403
10404         if (obj->tiling_mode == I915_TILING_Y) {
10405                 DRM_DEBUG("hardware does not support tiling Y\n");
10406                 return -EINVAL;
10407         }
10408
10409         if (mode_cmd->pitches[0] & 63) {
10410                 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
10411                           mode_cmd->pitches[0]);
10412                 return -EINVAL;
10413         }
10414
10415         if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
10416                 pitch_limit = 32*1024;
10417         } else if (INTEL_INFO(dev)->gen >= 4) {
10418                 if (obj->tiling_mode)
10419                         pitch_limit = 16*1024;
10420                 else
10421                         pitch_limit = 32*1024;
10422         } else if (INTEL_INFO(dev)->gen >= 3) {
10423                 if (obj->tiling_mode)
10424                         pitch_limit = 8*1024;
10425                 else
10426                         pitch_limit = 16*1024;
10427         } else
10428                 /* XXX DSPC is limited to 4k tiled */
10429                 pitch_limit = 8*1024;
10430
10431         if (mode_cmd->pitches[0] > pitch_limit) {
10432                 DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
10433                           obj->tiling_mode ? "tiled" : "linear",
10434                           mode_cmd->pitches[0], pitch_limit);
10435                 return -EINVAL;
10436         }
10437
10438         if (obj->tiling_mode != I915_TILING_NONE &&
10439             mode_cmd->pitches[0] != obj->stride) {
10440                 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
10441                           mode_cmd->pitches[0], obj->stride);
10442                 return -EINVAL;
10443         }
10444
10445         /* Reject formats not supported by any plane early. */
10446         switch (mode_cmd->pixel_format) {
10447         case DRM_FORMAT_C8:
10448         case DRM_FORMAT_RGB565:
10449         case DRM_FORMAT_XRGB8888:
10450         case DRM_FORMAT_ARGB8888:
10451                 break;
10452         case DRM_FORMAT_XRGB1555:
10453         case DRM_FORMAT_ARGB1555:
10454                 if (INTEL_INFO(dev)->gen > 3) {
10455                         DRM_DEBUG("unsupported pixel format: %s\n",
10456                                   drm_get_format_name(mode_cmd->pixel_format));
10457                         return -EINVAL;
10458                 }
10459                 break;
10460         case DRM_FORMAT_XBGR8888:
10461         case DRM_FORMAT_ABGR8888:
10462         case DRM_FORMAT_XRGB2101010:
10463         case DRM_FORMAT_ARGB2101010:
10464         case DRM_FORMAT_XBGR2101010:
10465         case DRM_FORMAT_ABGR2101010:
10466                 if (INTEL_INFO(dev)->gen < 4) {
10467                         DRM_DEBUG("unsupported pixel format: %s\n",
10468                                   drm_get_format_name(mode_cmd->pixel_format));
10469                         return -EINVAL;
10470                 }
10471                 break;
10472         case DRM_FORMAT_YUYV:
10473         case DRM_FORMAT_UYVY:
10474         case DRM_FORMAT_YVYU:
10475         case DRM_FORMAT_VYUY:
10476                 if (INTEL_INFO(dev)->gen < 5) {
10477                         DRM_DEBUG("unsupported pixel format: %s\n",
10478                                   drm_get_format_name(mode_cmd->pixel_format));
10479                         return -EINVAL;
10480                 }
10481                 break;
10482         default:
10483                 DRM_DEBUG("unsupported pixel format: %s\n",
10484                           drm_get_format_name(mode_cmd->pixel_format));
10485                 return -EINVAL;
10486         }
10487
10488         /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
10489         if (mode_cmd->offsets[0] != 0)
10490                 return -EINVAL;
10491
10492         tile_height = IS_GEN2(dev) ? 16 : 8;
10493         aligned_height = ALIGN(mode_cmd->height,
10494                                obj->tiling_mode ? tile_height : 1);
10495         /* FIXME drm helper for size checks (especially planar formats)? */
10496         if (obj->base.size < aligned_height * mode_cmd->pitches[0])
10497                 return -EINVAL;
10498
10499         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
10500         intel_fb->obj = obj;
10501         intel_fb->obj->framebuffer_references++;
10502
10503         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
10504         if (ret) {
10505                 DRM_ERROR("framebuffer init failed %d\n", ret);
10506                 return ret;
10507         }
10508
10509         return 0;
10510 }
10511
10512 static struct drm_framebuffer *
10513 intel_user_framebuffer_create(struct drm_device *dev,
10514                               struct drm_file *filp,
10515                               struct drm_mode_fb_cmd2 *mode_cmd)
10516 {
10517         struct drm_i915_gem_object *obj;
10518
10519         obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
10520                                                 mode_cmd->handles[0]));
10521         if (&obj->base == NULL)
10522                 return ERR_PTR(-ENOENT);
10523
10524         return intel_framebuffer_create(dev, mode_cmd, obj);
10525 }
10526
10527 #ifndef CONFIG_DRM_I915_FBDEV
10528 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
10529 {
10530 }
10531 #endif
10532
10533 static const struct drm_mode_config_funcs intel_mode_funcs = {
10534         .fb_create = intel_user_framebuffer_create,
10535         .output_poll_changed = intel_fbdev_output_poll_changed,
10536 };
10537
10538 /* Set up chip specific display functions */
10539 static void intel_init_display(struct drm_device *dev)
10540 {
10541         struct drm_i915_private *dev_priv = dev->dev_private;
10542
10543         if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
10544                 dev_priv->display.find_dpll = g4x_find_best_dpll;
10545         else if (IS_VALLEYVIEW(dev))
10546                 dev_priv->display.find_dpll = vlv_find_best_dpll;
10547         else if (IS_PINEVIEW(dev))
10548                 dev_priv->display.find_dpll = pnv_find_best_dpll;
10549         else
10550                 dev_priv->display.find_dpll = i9xx_find_best_dpll;
10551
10552         if (HAS_DDI(dev)) {
10553                 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
10554                 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
10555                 dev_priv->display.crtc_enable = haswell_crtc_enable;
10556                 dev_priv->display.crtc_disable = haswell_crtc_disable;
10557                 dev_priv->display.off = haswell_crtc_off;
10558                 dev_priv->display.update_plane = ironlake_update_plane;
10559         } else if (HAS_PCH_SPLIT(dev)) {
10560                 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
10561                 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
10562                 dev_priv->display.crtc_enable = ironlake_crtc_enable;
10563                 dev_priv->display.crtc_disable = ironlake_crtc_disable;
10564                 dev_priv->display.off = ironlake_crtc_off;
10565                 dev_priv->display.update_plane = ironlake_update_plane;
10566         } else if (IS_VALLEYVIEW(dev)) {
10567                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
10568                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
10569                 dev_priv->display.crtc_enable = valleyview_crtc_enable;
10570                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
10571                 dev_priv->display.off = i9xx_crtc_off;
10572                 dev_priv->display.update_plane = i9xx_update_plane;
10573         } else {
10574                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
10575                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
10576                 dev_priv->display.crtc_enable = i9xx_crtc_enable;
10577                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
10578                 dev_priv->display.off = i9xx_crtc_off;
10579                 dev_priv->display.update_plane = i9xx_update_plane;
10580         }
10581
10582         /* Returns the core display clock speed */
10583         if (IS_VALLEYVIEW(dev))
10584                 dev_priv->display.get_display_clock_speed =
10585                         valleyview_get_display_clock_speed;
10586         else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
10587                 dev_priv->display.get_display_clock_speed =
10588                         i945_get_display_clock_speed;
10589         else if (IS_I915G(dev))
10590                 dev_priv->display.get_display_clock_speed =
10591                         i915_get_display_clock_speed;
10592         else if (IS_I945GM(dev) || IS_845G(dev))
10593                 dev_priv->display.get_display_clock_speed =
10594                         i9xx_misc_get_display_clock_speed;
10595         else if (IS_PINEVIEW(dev))
10596                 dev_priv->display.get_display_clock_speed =
10597                         pnv_get_display_clock_speed;
10598         else if (IS_I915GM(dev))
10599                 dev_priv->display.get_display_clock_speed =
10600                         i915gm_get_display_clock_speed;
10601         else if (IS_I865G(dev))
10602                 dev_priv->display.get_display_clock_speed =
10603                         i865_get_display_clock_speed;
10604         else if (IS_I85X(dev))
10605                 dev_priv->display.get_display_clock_speed =
10606                         i855_get_display_clock_speed;
10607         else /* 852, 830 */
10608                 dev_priv->display.get_display_clock_speed =
10609                         i830_get_display_clock_speed;
10610
10611         if (HAS_PCH_SPLIT(dev)) {
10612                 if (IS_GEN5(dev)) {
10613                         dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
10614                         dev_priv->display.write_eld = ironlake_write_eld;
10615                 } else if (IS_GEN6(dev)) {
10616                         dev_priv->display.fdi_link_train = gen6_fdi_link_train;
10617                         dev_priv->display.write_eld = ironlake_write_eld;
10618                 } else if (IS_IVYBRIDGE(dev)) {
10619                         /* FIXME: detect B0+ stepping and use auto training */
10620                         dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
10621                         dev_priv->display.write_eld = ironlake_write_eld;
10622                         dev_priv->display.modeset_global_resources =
10623                                 ivb_modeset_global_resources;
10624                 } else if (IS_HASWELL(dev) || IS_GEN8(dev)) {
10625                         dev_priv->display.fdi_link_train = hsw_fdi_link_train;
10626                         dev_priv->display.write_eld = haswell_write_eld;
10627                         dev_priv->display.modeset_global_resources =
10628                                 haswell_modeset_global_resources;
10629                 }
10630         } else if (IS_G4X(dev)) {
10631                 dev_priv->display.write_eld = g4x_write_eld;
10632         } else if (IS_VALLEYVIEW(dev)) {
10633                 dev_priv->display.modeset_global_resources =
10634                         valleyview_modeset_global_resources;
10635                 dev_priv->display.write_eld = ironlake_write_eld;
10636         }
10637
10638         /* Default just returns -ENODEV to indicate unsupported */
10639         dev_priv->display.queue_flip = intel_default_queue_flip;
10640
10641         switch (INTEL_INFO(dev)->gen) {
10642         case 2:
10643                 dev_priv->display.queue_flip = intel_gen2_queue_flip;
10644                 break;
10645
10646         case 3:
10647                 dev_priv->display.queue_flip = intel_gen3_queue_flip;
10648                 break;
10649
10650         case 4:
10651         case 5:
10652                 dev_priv->display.queue_flip = intel_gen4_queue_flip;
10653                 break;
10654
10655         case 6:
10656                 dev_priv->display.queue_flip = intel_gen6_queue_flip;
10657                 break;
10658         case 7:
10659         case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
10660                 dev_priv->display.queue_flip = intel_gen7_queue_flip;
10661                 break;
10662         }
10663
10664         intel_panel_init_backlight_funcs(dev);
10665 }
10666
10667 /*
10668  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
10669  * resume, or other times.  This quirk makes sure that's the case for
10670  * affected systems.
10671  */
10672 static void quirk_pipea_force(struct drm_device *dev)
10673 {
10674         struct drm_i915_private *dev_priv = dev->dev_private;
10675
10676         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
10677         DRM_INFO("applying pipe a force quirk\n");
10678 }
10679
10680 /*
10681  * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
10682  */
10683 static void quirk_ssc_force_disable(struct drm_device *dev)
10684 {
10685         struct drm_i915_private *dev_priv = dev->dev_private;
10686         dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
10687         DRM_INFO("applying lvds SSC disable quirk\n");
10688 }
10689
10690 /*
10691  * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
10692  * brightness value
10693  */
10694 static void quirk_invert_brightness(struct drm_device *dev)
10695 {
10696         struct drm_i915_private *dev_priv = dev->dev_private;
10697         dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
10698         DRM_INFO("applying inverted panel brightness quirk\n");
10699 }
10700
10701 struct intel_quirk {
10702         int device;
10703         int subsystem_vendor;
10704         int subsystem_device;
10705         void (*hook)(struct drm_device *dev);
10706 };
10707
10708 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
10709 struct intel_dmi_quirk {
10710         void (*hook)(struct drm_device *dev);
10711         const struct dmi_system_id (*dmi_id_list)[];
10712 };
10713
10714 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
10715 {
10716         DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
10717         return 1;
10718 }
10719
10720 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
10721         {
10722                 .dmi_id_list = &(const struct dmi_system_id[]) {
10723                         {
10724                                 .callback = intel_dmi_reverse_brightness,
10725                                 .ident = "NCR Corporation",
10726                                 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
10727                                             DMI_MATCH(DMI_PRODUCT_NAME, ""),
10728                                 },
10729                         },
10730                         { }  /* terminating entry */
10731                 },
10732                 .hook = quirk_invert_brightness,
10733         },
10734 };
10735
10736 static struct intel_quirk intel_quirks[] = {
10737         /* HP Mini needs pipe A force quirk (LP: #322104) */
10738         { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
10739
10740         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
10741         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
10742
10743         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
10744         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
10745
10746         /* 830 needs to leave pipe A & dpll A up */
10747         { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
10748
10749         /* Lenovo U160 cannot use SSC on LVDS */
10750         { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
10751
10752         /* Sony Vaio Y cannot use SSC on LVDS */
10753         { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
10754
10755         /*
10756          * All GM45 Acer (and its brands eMachines and Packard Bell) laptops
10757          * seem to use inverted backlight PWM.
10758          */
10759         { 0x2a42, 0x1025, PCI_ANY_ID, quirk_invert_brightness },
10760 };
10761
10762 static void intel_init_quirks(struct drm_device *dev)
10763 {
10764         struct pci_dev *d = dev->pdev;
10765         int i;
10766
10767         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
10768                 struct intel_quirk *q = &intel_quirks[i];
10769
10770                 if (d->device == q->device &&
10771                     (d->subsystem_vendor == q->subsystem_vendor ||
10772                      q->subsystem_vendor == PCI_ANY_ID) &&
10773                     (d->subsystem_device == q->subsystem_device ||
10774                      q->subsystem_device == PCI_ANY_ID))
10775                         q->hook(dev);
10776         }
10777         for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
10778                 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
10779                         intel_dmi_quirks[i].hook(dev);
10780         }
10781 }
10782
10783 /* Disable the VGA plane that we never use */
10784 static void i915_disable_vga(struct drm_device *dev)
10785 {
10786         struct drm_i915_private *dev_priv = dev->dev_private;
10787         u8 sr1;
10788         u32 vga_reg = i915_vgacntrl_reg(dev);
10789
10790         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
10791         outb(SR01, VGA_SR_INDEX);
10792         sr1 = inb(VGA_SR_DATA);
10793         outb(sr1 | 1<<5, VGA_SR_DATA);
10794         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
10795         udelay(300);
10796
10797         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
10798         POSTING_READ(vga_reg);
10799 }
10800
10801 void intel_modeset_init_hw(struct drm_device *dev)
10802 {
10803         intel_prepare_ddi(dev);
10804
10805         intel_init_clock_gating(dev);
10806
10807         intel_init_dpio(dev);
10808
10809         mutex_lock(&dev->struct_mutex);
10810         intel_enable_gt_powersave(dev);
10811         mutex_unlock(&dev->struct_mutex);
10812 }
10813
10814 void intel_modeset_suspend_hw(struct drm_device *dev)
10815 {
10816         intel_suspend_hw(dev);
10817 }
10818
10819 void intel_modeset_init(struct drm_device *dev)
10820 {
10821         struct drm_i915_private *dev_priv = dev->dev_private;
10822         int i, j, ret;
10823
10824         drm_mode_config_init(dev);
10825
10826         dev->mode_config.min_width = 0;
10827         dev->mode_config.min_height = 0;
10828
10829         dev->mode_config.preferred_depth = 24;
10830         dev->mode_config.prefer_shadow = 1;
10831
10832         dev->mode_config.funcs = &intel_mode_funcs;
10833
10834         intel_init_quirks(dev);
10835
10836         intel_init_pm(dev);
10837
10838         if (INTEL_INFO(dev)->num_pipes == 0)
10839                 return;
10840
10841         intel_init_display(dev);
10842
10843         if (IS_GEN2(dev)) {
10844                 dev->mode_config.max_width = 2048;
10845                 dev->mode_config.max_height = 2048;
10846         } else if (IS_GEN3(dev)) {
10847                 dev->mode_config.max_width = 4096;
10848                 dev->mode_config.max_height = 4096;
10849         } else {
10850                 dev->mode_config.max_width = 8192;
10851                 dev->mode_config.max_height = 8192;
10852         }
10853         dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
10854
10855         DRM_DEBUG_KMS("%d display pipe%s available.\n",
10856                       INTEL_INFO(dev)->num_pipes,
10857                       INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
10858
10859         for_each_pipe(i) {
10860                 intel_crtc_init(dev, i);
10861                 for (j = 0; j < dev_priv->num_plane; j++) {
10862                         ret = intel_plane_init(dev, i, j);
10863                         if (ret)
10864                                 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
10865                                               pipe_name(i), sprite_name(i, j), ret);
10866                 }
10867         }
10868
10869         intel_cpu_pll_init(dev);
10870         intel_shared_dpll_init(dev);
10871
10872         /* Just disable it once at startup */
10873         i915_disable_vga(dev);
10874         intel_setup_outputs(dev);
10875
10876         /* Just in case the BIOS is doing something questionable. */
10877         intel_disable_fbc(dev);
10878 }
10879
10880 static void
10881 intel_connector_break_all_links(struct intel_connector *connector)
10882 {
10883         connector->base.dpms = DRM_MODE_DPMS_OFF;
10884         connector->base.encoder = NULL;
10885         connector->encoder->connectors_active = false;
10886         connector->encoder->base.crtc = NULL;
10887 }
10888
10889 static void intel_enable_pipe_a(struct drm_device *dev)
10890 {
10891         struct intel_connector *connector;
10892         struct drm_connector *crt = NULL;
10893         struct intel_load_detect_pipe load_detect_temp;
10894
10895         /* We can't just switch on the pipe A, we need to set things up with a
10896          * proper mode and output configuration. As a gross hack, enable pipe A
10897          * by enabling the load detect pipe once. */
10898         list_for_each_entry(connector,
10899                             &dev->mode_config.connector_list,
10900                             base.head) {
10901                 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
10902                         crt = &connector->base;
10903                         break;
10904                 }
10905         }
10906
10907         if (!crt)
10908                 return;
10909
10910         if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
10911                 intel_release_load_detect_pipe(crt, &load_detect_temp);
10912
10913
10914 }
10915
10916 static bool
10917 intel_check_plane_mapping(struct intel_crtc *crtc)
10918 {
10919         struct drm_device *dev = crtc->base.dev;
10920         struct drm_i915_private *dev_priv = dev->dev_private;
10921         u32 reg, val;
10922
10923         if (INTEL_INFO(dev)->num_pipes == 1)
10924                 return true;
10925
10926         reg = DSPCNTR(!crtc->plane);
10927         val = I915_READ(reg);
10928
10929         if ((val & DISPLAY_PLANE_ENABLE) &&
10930             (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
10931                 return false;
10932
10933         return true;
10934 }
10935
10936 static void intel_sanitize_crtc(struct intel_crtc *crtc)
10937 {
10938         struct drm_device *dev = crtc->base.dev;
10939         struct drm_i915_private *dev_priv = dev->dev_private;
10940         u32 reg;
10941
10942         /* Clear any frame start delays used for debugging left by the BIOS */
10943         reg = PIPECONF(crtc->config.cpu_transcoder);
10944         I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
10945
10946         /* We need to sanitize the plane -> pipe mapping first because this will
10947          * disable the crtc (and hence change the state) if it is wrong. Note
10948          * that gen4+ has a fixed plane -> pipe mapping.  */
10949         if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
10950                 struct intel_connector *connector;
10951                 bool plane;
10952
10953                 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
10954                               crtc->base.base.id);
10955
10956                 /* Pipe has the wrong plane attached and the plane is active.
10957                  * Temporarily change the plane mapping and disable everything
10958                  * ...  */
10959                 plane = crtc->plane;
10960                 crtc->plane = !plane;
10961                 dev_priv->display.crtc_disable(&crtc->base);
10962                 crtc->plane = plane;
10963
10964                 /* ... and break all links. */
10965                 list_for_each_entry(connector, &dev->mode_config.connector_list,
10966                                     base.head) {
10967                         if (connector->encoder->base.crtc != &crtc->base)
10968                                 continue;
10969
10970                         intel_connector_break_all_links(connector);
10971                 }
10972
10973                 WARN_ON(crtc->active);
10974                 crtc->base.enabled = false;
10975         }
10976
10977         if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
10978             crtc->pipe == PIPE_A && !crtc->active) {
10979                 /* BIOS forgot to enable pipe A, this mostly happens after
10980                  * resume. Force-enable the pipe to fix this, the update_dpms
10981                  * call below we restore the pipe to the right state, but leave
10982                  * the required bits on. */
10983                 intel_enable_pipe_a(dev);
10984         }
10985
10986         /* Adjust the state of the output pipe according to whether we
10987          * have active connectors/encoders. */
10988         intel_crtc_update_dpms(&crtc->base);
10989
10990         if (crtc->active != crtc->base.enabled) {
10991                 struct intel_encoder *encoder;
10992
10993                 /* This can happen either due to bugs in the get_hw_state
10994                  * functions or because the pipe is force-enabled due to the
10995                  * pipe A quirk. */
10996                 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
10997                               crtc->base.base.id,
10998                               crtc->base.enabled ? "enabled" : "disabled",
10999                               crtc->active ? "enabled" : "disabled");
11000
11001                 crtc->base.enabled = crtc->active;
11002
11003                 /* Because we only establish the connector -> encoder ->
11004                  * crtc links if something is active, this means the
11005                  * crtc is now deactivated. Break the links. connector
11006                  * -> encoder links are only establish when things are
11007                  *  actually up, hence no need to break them. */
11008                 WARN_ON(crtc->active);
11009
11010                 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
11011                         WARN_ON(encoder->connectors_active);
11012                         encoder->base.crtc = NULL;
11013                 }
11014         }
11015 }
11016
11017 static void intel_sanitize_encoder(struct intel_encoder *encoder)
11018 {
11019         struct intel_connector *connector;
11020         struct drm_device *dev = encoder->base.dev;
11021
11022         /* We need to check both for a crtc link (meaning that the
11023          * encoder is active and trying to read from a pipe) and the
11024          * pipe itself being active. */
11025         bool has_active_crtc = encoder->base.crtc &&
11026                 to_intel_crtc(encoder->base.crtc)->active;
11027
11028         if (encoder->connectors_active && !has_active_crtc) {
11029                 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
11030                               encoder->base.base.id,
11031                               drm_get_encoder_name(&encoder->base));
11032
11033                 /* Connector is active, but has no active pipe. This is
11034                  * fallout from our resume register restoring. Disable
11035                  * the encoder manually again. */
11036                 if (encoder->base.crtc) {
11037                         DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
11038                                       encoder->base.base.id,
11039                                       drm_get_encoder_name(&encoder->base));
11040                         encoder->disable(encoder);
11041                 }
11042
11043                 /* Inconsistent output/port/pipe state happens presumably due to
11044                  * a bug in one of the get_hw_state functions. Or someplace else
11045                  * in our code, like the register restore mess on resume. Clamp
11046                  * things to off as a safer default. */
11047                 list_for_each_entry(connector,
11048                                     &dev->mode_config.connector_list,
11049                                     base.head) {
11050                         if (connector->encoder != encoder)
11051                                 continue;
11052
11053                         intel_connector_break_all_links(connector);
11054                 }
11055         }
11056         /* Enabled encoders without active connectors will be fixed in
11057          * the crtc fixup. */
11058 }
11059
11060 void i915_redisable_vga(struct drm_device *dev)
11061 {
11062         struct drm_i915_private *dev_priv = dev->dev_private;
11063         u32 vga_reg = i915_vgacntrl_reg(dev);
11064
11065         /* This function can be called both from intel_modeset_setup_hw_state or
11066          * at a very early point in our resume sequence, where the power well
11067          * structures are not yet restored. Since this function is at a very
11068          * paranoid "someone might have enabled VGA while we were not looking"
11069          * level, just check if the power well is enabled instead of trying to
11070          * follow the "don't touch the power well if we don't need it" policy
11071          * the rest of the driver uses. */
11072         if ((IS_HASWELL(dev) || IS_BROADWELL(dev)) &&
11073             (I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_STATE_ENABLED) == 0)
11074                 return;
11075
11076         if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
11077                 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
11078                 i915_disable_vga(dev);
11079         }
11080 }
11081
11082 static void intel_modeset_readout_hw_state(struct drm_device *dev)
11083 {
11084         struct drm_i915_private *dev_priv = dev->dev_private;
11085         enum pipe pipe;
11086         struct intel_crtc *crtc;
11087         struct intel_encoder *encoder;
11088         struct intel_connector *connector;
11089         int i;
11090
11091         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11092                             base.head) {
11093                 memset(&crtc->config, 0, sizeof(crtc->config));
11094
11095                 crtc->active = dev_priv->display.get_pipe_config(crtc,
11096                                                                  &crtc->config);
11097
11098                 crtc->base.enabled = crtc->active;
11099                 crtc->primary_enabled = crtc->active;
11100
11101                 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
11102                               crtc->base.base.id,
11103                               crtc->active ? "enabled" : "disabled");
11104         }
11105
11106         /* FIXME: Smash this into the new shared dpll infrastructure. */
11107         if (HAS_DDI(dev))
11108                 intel_ddi_setup_hw_pll_state(dev);
11109
11110         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11111                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11112
11113                 pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state);
11114                 pll->active = 0;
11115                 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11116                                     base.head) {
11117                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
11118                                 pll->active++;
11119                 }
11120                 pll->refcount = pll->active;
11121
11122                 DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
11123                               pll->name, pll->refcount, pll->on);
11124         }
11125
11126         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11127                             base.head) {
11128                 pipe = 0;
11129
11130                 if (encoder->get_hw_state(encoder, &pipe)) {
11131                         crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11132                         encoder->base.crtc = &crtc->base;
11133                         encoder->get_config(encoder, &crtc->config);
11134                 } else {
11135                         encoder->base.crtc = NULL;
11136                 }
11137
11138                 encoder->connectors_active = false;
11139                 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
11140                               encoder->base.base.id,
11141                               drm_get_encoder_name(&encoder->base),
11142                               encoder->base.crtc ? "enabled" : "disabled",
11143                               pipe_name(pipe));
11144         }
11145
11146         list_for_each_entry(connector, &dev->mode_config.connector_list,
11147                             base.head) {
11148                 if (connector->get_hw_state(connector)) {
11149                         connector->base.dpms = DRM_MODE_DPMS_ON;
11150                         connector->encoder->connectors_active = true;
11151                         connector->base.encoder = &connector->encoder->base;
11152                 } else {
11153                         connector->base.dpms = DRM_MODE_DPMS_OFF;
11154                         connector->base.encoder = NULL;
11155                 }
11156                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
11157                               connector->base.base.id,
11158                               drm_get_connector_name(&connector->base),
11159                               connector->base.encoder ? "enabled" : "disabled");
11160         }
11161 }
11162
11163 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
11164  * and i915 state tracking structures. */
11165 void intel_modeset_setup_hw_state(struct drm_device *dev,
11166                                   bool force_restore)
11167 {
11168         struct drm_i915_private *dev_priv = dev->dev_private;
11169         enum pipe pipe;
11170         struct intel_crtc *crtc;
11171         struct intel_encoder *encoder;
11172         int i;
11173
11174         intel_modeset_readout_hw_state(dev);
11175
11176         /*
11177          * Now that we have the config, copy it to each CRTC struct
11178          * Note that this could go away if we move to using crtc_config
11179          * checking everywhere.
11180          */
11181         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11182                             base.head) {
11183                 if (crtc->active && i915_fastboot) {
11184                         intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
11185
11186                         DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
11187                                       crtc->base.base.id);
11188                         drm_mode_debug_printmodeline(&crtc->base.mode);
11189                 }
11190         }
11191
11192         /* HW state is read out, now we need to sanitize this mess. */
11193         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11194                             base.head) {
11195                 intel_sanitize_encoder(encoder);
11196         }
11197
11198         for_each_pipe(pipe) {
11199                 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11200                 intel_sanitize_crtc(crtc);
11201                 intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
11202         }
11203
11204         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11205                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11206
11207                 if (!pll->on || pll->active)
11208                         continue;
11209
11210                 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
11211
11212                 pll->disable(dev_priv, pll);
11213                 pll->on = false;
11214         }
11215
11216         if (IS_HASWELL(dev))
11217                 ilk_wm_get_hw_state(dev);
11218
11219         if (force_restore) {
11220                 i915_redisable_vga(dev);
11221
11222                 /*
11223                  * We need to use raw interfaces for restoring state to avoid
11224                  * checking (bogus) intermediate states.
11225                  */
11226                 for_each_pipe(pipe) {
11227                         struct drm_crtc *crtc =
11228                                 dev_priv->pipe_to_crtc_mapping[pipe];
11229
11230                         __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
11231                                          crtc->fb);
11232                 }
11233         } else {
11234                 intel_modeset_update_staged_output_state(dev);
11235         }
11236
11237         intel_modeset_check_state(dev);
11238
11239         drm_mode_config_reset(dev);
11240 }
11241
11242 void intel_modeset_gem_init(struct drm_device *dev)
11243 {
11244         intel_modeset_init_hw(dev);
11245
11246         intel_setup_overlay(dev);
11247
11248         intel_modeset_setup_hw_state(dev, false);
11249 }
11250
11251 void intel_modeset_cleanup(struct drm_device *dev)
11252 {
11253         struct drm_i915_private *dev_priv = dev->dev_private;
11254         struct drm_crtc *crtc;
11255         struct drm_connector *connector;
11256
11257         /*
11258          * Interrupts and polling as the first thing to avoid creating havoc.
11259          * Too much stuff here (turning of rps, connectors, ...) would
11260          * experience fancy races otherwise.
11261          */
11262         drm_irq_uninstall(dev);
11263         cancel_work_sync(&dev_priv->hotplug_work);
11264         /*
11265          * Due to the hpd irq storm handling the hotplug work can re-arm the
11266          * poll handlers. Hence disable polling after hpd handling is shut down.
11267          */
11268         drm_kms_helper_poll_fini(dev);
11269
11270         mutex_lock(&dev->struct_mutex);
11271
11272         intel_unregister_dsm_handler();
11273
11274         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
11275                 /* Skip inactive CRTCs */
11276                 if (!crtc->fb)
11277                         continue;
11278
11279                 intel_increase_pllclock(crtc);
11280         }
11281
11282         intel_disable_fbc(dev);
11283
11284         intel_disable_gt_powersave(dev);
11285
11286         ironlake_teardown_rc6(dev);
11287
11288         mutex_unlock(&dev->struct_mutex);
11289
11290         /* flush any delayed tasks or pending work */
11291         flush_scheduled_work();
11292
11293         /* destroy the backlight and sysfs files before encoders/connectors */
11294         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
11295                 intel_panel_destroy_backlight(connector);
11296                 drm_sysfs_connector_remove(connector);
11297         }
11298
11299         drm_mode_config_cleanup(dev);
11300
11301         intel_cleanup_overlay(dev);
11302 }
11303
11304 /*
11305  * Return which encoder is currently attached for connector.
11306  */
11307 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
11308 {
11309         return &intel_attached_encoder(connector)->base;
11310 }
11311
11312 void intel_connector_attach_encoder(struct intel_connector *connector,
11313                                     struct intel_encoder *encoder)
11314 {
11315         connector->encoder = encoder;
11316         drm_mode_connector_attach_encoder(&connector->base,
11317                                           &encoder->base);
11318 }
11319
11320 /*
11321  * set vga decode state - true == enable VGA decode
11322  */
11323 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
11324 {
11325         struct drm_i915_private *dev_priv = dev->dev_private;
11326         u16 gmch_ctrl;
11327
11328         pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
11329         if (state)
11330                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
11331         else
11332                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
11333         pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
11334         return 0;
11335 }
11336
11337 struct intel_display_error_state {
11338
11339         u32 power_well_driver;
11340
11341         int num_transcoders;
11342
11343         struct intel_cursor_error_state {
11344                 u32 control;
11345                 u32 position;
11346                 u32 base;
11347                 u32 size;
11348         } cursor[I915_MAX_PIPES];
11349
11350         struct intel_pipe_error_state {
11351                 bool power_domain_on;
11352                 u32 source;
11353         } pipe[I915_MAX_PIPES];
11354
11355         struct intel_plane_error_state {
11356                 u32 control;
11357                 u32 stride;
11358                 u32 size;
11359                 u32 pos;
11360                 u32 addr;
11361                 u32 surface;
11362                 u32 tile_offset;
11363         } plane[I915_MAX_PIPES];
11364
11365         struct intel_transcoder_error_state {
11366                 bool power_domain_on;
11367                 enum transcoder cpu_transcoder;
11368
11369                 u32 conf;
11370
11371                 u32 htotal;
11372                 u32 hblank;
11373                 u32 hsync;
11374                 u32 vtotal;
11375                 u32 vblank;
11376                 u32 vsync;
11377         } transcoder[4];
11378 };
11379
11380 struct intel_display_error_state *
11381 intel_display_capture_error_state(struct drm_device *dev)
11382 {
11383         drm_i915_private_t *dev_priv = dev->dev_private;
11384         struct intel_display_error_state *error;
11385         int transcoders[] = {
11386                 TRANSCODER_A,
11387                 TRANSCODER_B,
11388                 TRANSCODER_C,
11389                 TRANSCODER_EDP,
11390         };
11391         int i;
11392
11393         if (INTEL_INFO(dev)->num_pipes == 0)
11394                 return NULL;
11395
11396         error = kzalloc(sizeof(*error), GFP_ATOMIC);
11397         if (error == NULL)
11398                 return NULL;
11399
11400         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
11401                 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
11402
11403         for_each_pipe(i) {
11404                 error->pipe[i].power_domain_on =
11405                         intel_display_power_enabled_sw(dev, POWER_DOMAIN_PIPE(i));
11406                 if (!error->pipe[i].power_domain_on)
11407                         continue;
11408
11409                 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
11410                         error->cursor[i].control = I915_READ(CURCNTR(i));
11411                         error->cursor[i].position = I915_READ(CURPOS(i));
11412                         error->cursor[i].base = I915_READ(CURBASE(i));
11413                 } else {
11414                         error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
11415                         error->cursor[i].position = I915_READ(CURPOS_IVB(i));
11416                         error->cursor[i].base = I915_READ(CURBASE_IVB(i));
11417                 }
11418
11419                 error->plane[i].control = I915_READ(DSPCNTR(i));
11420                 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
11421                 if (INTEL_INFO(dev)->gen <= 3) {
11422                         error->plane[i].size = I915_READ(DSPSIZE(i));
11423                         error->plane[i].pos = I915_READ(DSPPOS(i));
11424                 }
11425                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
11426                         error->plane[i].addr = I915_READ(DSPADDR(i));
11427                 if (INTEL_INFO(dev)->gen >= 4) {
11428                         error->plane[i].surface = I915_READ(DSPSURF(i));
11429                         error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
11430                 }
11431
11432                 error->pipe[i].source = I915_READ(PIPESRC(i));
11433         }
11434
11435         error->num_transcoders = INTEL_INFO(dev)->num_pipes;
11436         if (HAS_DDI(dev_priv->dev))
11437                 error->num_transcoders++; /* Account for eDP. */
11438
11439         for (i = 0; i < error->num_transcoders; i++) {
11440                 enum transcoder cpu_transcoder = transcoders[i];
11441
11442                 error->transcoder[i].power_domain_on =
11443                         intel_display_power_enabled_sw(dev, POWER_DOMAIN_PIPE(i));
11444                 if (!error->transcoder[i].power_domain_on)
11445                         continue;
11446
11447                 error->transcoder[i].cpu_transcoder = cpu_transcoder;
11448
11449                 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
11450                 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
11451                 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
11452                 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
11453                 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
11454                 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
11455                 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
11456         }
11457
11458         return error;
11459 }
11460
11461 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
11462
11463 void
11464 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
11465                                 struct drm_device *dev,
11466                                 struct intel_display_error_state *error)
11467 {
11468         int i;
11469
11470         if (!error)
11471                 return;
11472
11473         err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
11474         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
11475                 err_printf(m, "PWR_WELL_CTL2: %08x\n",
11476                            error->power_well_driver);
11477         for_each_pipe(i) {
11478                 err_printf(m, "Pipe [%d]:\n", i);
11479                 err_printf(m, "  Power: %s\n",
11480                            error->pipe[i].power_domain_on ? "on" : "off");
11481                 err_printf(m, "  SRC: %08x\n", error->pipe[i].source);
11482
11483                 err_printf(m, "Plane [%d]:\n", i);
11484                 err_printf(m, "  CNTR: %08x\n", error->plane[i].control);
11485                 err_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
11486                 if (INTEL_INFO(dev)->gen <= 3) {
11487                         err_printf(m, "  SIZE: %08x\n", error->plane[i].size);
11488                         err_printf(m, "  POS: %08x\n", error->plane[i].pos);
11489                 }
11490                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
11491                         err_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
11492                 if (INTEL_INFO(dev)->gen >= 4) {
11493                         err_printf(m, "  SURF: %08x\n", error->plane[i].surface);
11494                         err_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
11495                 }
11496
11497                 err_printf(m, "Cursor [%d]:\n", i);
11498                 err_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
11499                 err_printf(m, "  POS: %08x\n", error->cursor[i].position);
11500                 err_printf(m, "  BASE: %08x\n", error->cursor[i].base);
11501         }
11502
11503         for (i = 0; i < error->num_transcoders; i++) {
11504                 err_printf(m, "CPU transcoder: %c\n",
11505                            transcoder_name(error->transcoder[i].cpu_transcoder));
11506                 err_printf(m, "  Power: %s\n",
11507                            error->transcoder[i].power_domain_on ? "on" : "off");
11508                 err_printf(m, "  CONF: %08x\n", error->transcoder[i].conf);
11509                 err_printf(m, "  HTOTAL: %08x\n", error->transcoder[i].htotal);
11510                 err_printf(m, "  HBLANK: %08x\n", error->transcoder[i].hblank);
11511                 err_printf(m, "  HSYNC: %08x\n", error->transcoder[i].hsync);
11512                 err_printf(m, "  VTOTAL: %08x\n", error->transcoder[i].vtotal);
11513                 err_printf(m, "  VBLANK: %08x\n", error->transcoder[i].vblank);
11514                 err_printf(m, "  VSYNC: %08x\n", error->transcoder[i].vsync);
11515         }
11516 }