2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Eric Anholt <eric@anholt.net>
28 #include <linux/string.h>
29 #include <linux/bitops.h>
31 #include <drm/i915_drm.h>
34 /** @file i915_gem_tiling.c
36 * Support for managing tiling state of buffer objects.
38 * The idea behind tiling is to increase cache hit rates by rearranging
39 * pixel data so that a group of pixel accesses are in the same cacheline.
40 * Performance improvement from doing this on the back/depth buffer are on
43 * Intel architectures make this somewhat more complicated, though, by
44 * adjustments made to addressing of data when the memory is in interleaved
45 * mode (matched pairs of DIMMS) to improve memory bandwidth.
46 * For interleaved memory, the CPU sends every sequential 64 bytes
47 * to an alternate memory channel so it can get the bandwidth from both.
49 * The GPU also rearranges its accesses for increased bandwidth to interleaved
50 * memory, and it matches what the CPU does for non-tiled. However, when tiled
51 * it does it a little differently, since one walks addresses not just in the
52 * X direction but also Y. So, along with alternating channels when bit
53 * 6 of the address flips, it also alternates when other bits flip -- Bits 9
54 * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
55 * are common to both the 915 and 965-class hardware.
57 * The CPU also sometimes XORs in higher bits as well, to improve
58 * bandwidth doing strided access like we do so frequently in graphics. This
59 * is called "Channel XOR Randomization" in the MCH documentation. The result
60 * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
63 * All of this bit 6 XORing has an effect on our memory management,
64 * as we need to make sure that the 3d driver can correctly address object
67 * If we don't have interleaved memory, all tiling is safe and no swizzling is
70 * When bit 17 is XORed in, we simply refuse to tile at all. Bit
71 * 17 is not just a page offset, so as we page an objet out and back in,
72 * individual pages in it will have different bit 17 addresses, resulting in
73 * each 64 bytes being swapped with its neighbor!
75 * Otherwise, if interleaved, we have to tell the 3d driver what the address
76 * swizzling it needs to do is, since it's writing with the CPU to the pages
77 * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
78 * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
79 * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
80 * to match what the GPU expects.
84 * Detects bit 6 swizzling of address lookup between IGD access and CPU
85 * access through main memory.
88 i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
90 drm_i915_private_t *dev_priv = dev->dev_private;
91 uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
92 uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
94 if (IS_VALLEYVIEW(dev)) {
95 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
96 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
97 } else if (INTEL_INFO(dev)->gen >= 6) {
98 uint32_t dimm_c0, dimm_c1;
99 dimm_c0 = I915_READ(MAD_DIMM_C0);
100 dimm_c1 = I915_READ(MAD_DIMM_C1);
101 dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
102 dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
103 /* Enable swizzling when the channels are populated with
104 * identically sized dimms. We don't need to check the 3rd
105 * channel because no cpu with gpu attached ships in that
106 * configuration. Also, swizzling only makes sense for 2
107 * channels anyway. */
108 if (dimm_c0 == dimm_c1) {
109 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
110 swizzle_y = I915_BIT_6_SWIZZLE_9;
112 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
113 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
115 } else if (IS_GEN5(dev)) {
116 /* On Ironlake whatever DRAM config, GPU always do
117 * same swizzling setup.
119 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
120 swizzle_y = I915_BIT_6_SWIZZLE_9;
121 } else if (IS_GEN2(dev)) {
122 /* As far as we know, the 865 doesn't have these bit 6
125 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
126 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
127 } else if (IS_MOBILE(dev) || (IS_GEN3(dev) && !IS_G33(dev))) {
130 /* On 9xx chipsets, channel interleave by the CPU is
131 * determined by DCC. For single-channel, neither the CPU
132 * nor the GPU do swizzling. For dual channel interleaved,
133 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
134 * 9 for Y tiled. The CPU's interleave is independent, and
135 * can be based on either bit 11 (haven't seen this yet) or
138 dcc = I915_READ(DCC);
139 switch (dcc & DCC_ADDRESSING_MODE_MASK) {
140 case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
141 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
142 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
143 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
145 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
146 if (dcc & DCC_CHANNEL_XOR_DISABLE) {
147 /* This is the base swizzling by the GPU for
150 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
151 swizzle_y = I915_BIT_6_SWIZZLE_9;
152 } else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
153 /* Bit 11 swizzling by the CPU in addition. */
154 swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
155 swizzle_y = I915_BIT_6_SWIZZLE_9_11;
157 /* Bit 17 swizzling by the CPU in addition. */
158 swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
159 swizzle_y = I915_BIT_6_SWIZZLE_9_17;
163 if (dcc == 0xffffffff) {
164 DRM_ERROR("Couldn't read from MCHBAR. "
165 "Disabling tiling.\n");
166 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
167 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
170 /* The 965, G33, and newer, have a very flexible memory
171 * configuration. It will enable dual-channel mode
172 * (interleaving) on as much memory as it can, and the GPU
173 * will additionally sometimes enable different bit 6
174 * swizzling for tiled objects from the CPU.
176 * Here's what I found on the G965:
177 * slot fill memory size swizzling
178 * 0A 0B 1A 1B 1-ch 2-ch
180 * 512 0 512 0 16 1008 X
181 * 512 0 0 512 16 1008 X
182 * 0 512 0 512 16 1008 X
183 * 1024 1024 1024 0 2048 1024 O
185 * We could probably detect this based on either the DRB
186 * matching, which was the case for the swizzling required in
187 * the table above, or from the 1-ch value being less than
188 * the minimum size of a rank.
190 if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
191 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
192 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
194 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
195 swizzle_y = I915_BIT_6_SWIZZLE_9;
199 dev_priv->mm.bit_6_swizzle_x = swizzle_x;
200 dev_priv->mm.bit_6_swizzle_y = swizzle_y;
203 /* Check pitch constriants for all chips & tiling formats */
205 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
209 /* Linear is always fine */
210 if (tiling_mode == I915_TILING_NONE)
214 (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
219 /* check maximum stride & object size */
220 if (INTEL_INFO(dev)->gen >= 4) {
221 /* i965 stores the end address of the gtt mapping in the fence
222 * reg, so dont bother to check the size */
223 if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
230 if (size > I830_FENCE_MAX_SIZE_VAL << 20)
233 if (size > I830_FENCE_MAX_SIZE_VAL << 19)
238 /* 965+ just needs multiples of tile width */
239 if (INTEL_INFO(dev)->gen >= 4) {
240 if (stride & (tile_width - 1))
245 /* Pre-965 needs power of two tile widths */
246 if (stride < tile_width)
249 if (stride & (stride - 1))
255 /* Is the current GTT allocation valid for the change in tiling? */
257 i915_gem_object_fence_ok(struct drm_i915_gem_object *obj, int tiling_mode)
261 if (tiling_mode == I915_TILING_NONE)
264 if (INTEL_INFO(obj->base.dev)->gen >= 4)
267 if (INTEL_INFO(obj->base.dev)->gen == 3) {
268 if (obj->gtt_offset & ~I915_FENCE_START_MASK)
271 if (obj->gtt_offset & ~I830_FENCE_START_MASK)
275 size = i915_gem_get_gtt_size(obj->base.dev, obj->base.size, tiling_mode);
276 if (obj->gtt_space->size != size)
279 if (obj->gtt_offset & (size - 1))
286 * Sets the tiling mode of an object, returning the required swizzling of
287 * bit 6 of addresses in the object.
290 i915_gem_set_tiling(struct drm_device *dev, void *data,
291 struct drm_file *file)
293 struct drm_i915_gem_set_tiling *args = data;
294 drm_i915_private_t *dev_priv = dev->dev_private;
295 struct drm_i915_gem_object *obj;
298 obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
299 if (&obj->base == NULL)
302 if (!i915_tiling_ok(dev,
303 args->stride, obj->base.size, args->tiling_mode)) {
304 drm_gem_object_unreference_unlocked(&obj->base);
308 if (obj->pin_count) {
309 drm_gem_object_unreference_unlocked(&obj->base);
313 if (args->tiling_mode == I915_TILING_NONE) {
314 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
317 if (args->tiling_mode == I915_TILING_X)
318 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
320 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
322 /* Hide bit 17 swizzling from the user. This prevents old Mesa
323 * from aborting the application on sw fallbacks to bit 17,
324 * and we use the pread/pwrite bit17 paths to swizzle for it.
325 * If there was a user that was relying on the swizzle
326 * information for drm_intel_bo_map()ed reads/writes this would
327 * break it, but we don't have any of those.
329 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
330 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
331 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
332 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
334 /* If we can't handle the swizzling, make it untiled. */
335 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
336 args->tiling_mode = I915_TILING_NONE;
337 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
342 mutex_lock(&dev->struct_mutex);
343 if (args->tiling_mode != obj->tiling_mode ||
344 args->stride != obj->stride) {
345 /* We need to rebind the object if its current allocation
346 * no longer meets the alignment restrictions for its new
347 * tiling mode. Otherwise we can just leave it alone, but
348 * need to ensure that any fence register is updated before
349 * the next fenced (either through the GTT or by the BLT unit
350 * on older GPUs) access.
352 * After updating the tiling parameters, we then flag whether
353 * we need to update an associated fence register. Note this
354 * has to also include the unfenced register the GPU uses
355 * whilst executing a fenced command for an untiled object.
358 obj->map_and_fenceable =
359 obj->gtt_space == NULL ||
360 (obj->gtt_offset + obj->base.size <= dev_priv->gtt.mappable_end &&
361 i915_gem_object_fence_ok(obj, args->tiling_mode));
363 /* Rebind if we need a change of alignment */
364 if (!obj->map_and_fenceable) {
365 u32 unfenced_alignment =
366 i915_gem_get_gtt_alignment(dev, obj->base.size,
369 if (obj->gtt_offset & (unfenced_alignment - 1))
370 ret = i915_gem_object_unbind(obj);
375 obj->fenced_gpu_access ||
376 obj->fence_reg != I915_FENCE_REG_NONE;
378 obj->tiling_mode = args->tiling_mode;
379 obj->stride = args->stride;
381 /* Force the fence to be reacquired for GTT access */
382 i915_gem_release_mmap(obj);
385 /* we have to maintain this existing ABI... */
386 args->stride = obj->stride;
387 args->tiling_mode = obj->tiling_mode;
389 /* Try to preallocate memory required to save swizzling on put-pages */
390 if (i915_gem_object_needs_bit17_swizzle(obj)) {
391 if (obj->bit_17 == NULL) {
392 obj->bit_17 = kmalloc(BITS_TO_LONGS(obj->base.size >> PAGE_SHIFT) *
393 sizeof(long), GFP_KERNEL);
400 drm_gem_object_unreference(&obj->base);
401 mutex_unlock(&dev->struct_mutex);
407 * Returns the current tiling mode and required bit 6 swizzling for the object.
410 i915_gem_get_tiling(struct drm_device *dev, void *data,
411 struct drm_file *file)
413 struct drm_i915_gem_get_tiling *args = data;
414 drm_i915_private_t *dev_priv = dev->dev_private;
415 struct drm_i915_gem_object *obj;
417 obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
418 if (&obj->base == NULL)
421 mutex_lock(&dev->struct_mutex);
423 args->tiling_mode = obj->tiling_mode;
424 switch (obj->tiling_mode) {
426 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
429 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
431 case I915_TILING_NONE:
432 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
435 DRM_ERROR("unknown tiling mode\n");
438 /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
439 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
440 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
441 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
442 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
444 drm_gem_object_unreference(&obj->base);
445 mutex_unlock(&dev->struct_mutex);
451 * Swap every 64 bytes of this page around, to account for it having a new
452 * bit 17 of its physical address and therefore being interpreted differently
456 i915_gem_swizzle_page(struct page *page)
464 for (i = 0; i < PAGE_SIZE; i += 128) {
465 memcpy(temp, &vaddr[i], 64);
466 memcpy(&vaddr[i], &vaddr[i + 64], 64);
467 memcpy(&vaddr[i + 64], temp, 64);
474 i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj)
476 struct sg_page_iter sg_iter;
479 if (obj->bit_17 == NULL)
483 for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
484 struct page *page = sg_page_iter_page(&sg_iter);
485 char new_bit_17 = page_to_phys(page) >> 17;
486 if ((new_bit_17 & 0x1) !=
487 (test_bit(i, obj->bit_17) != 0)) {
488 i915_gem_swizzle_page(page);
489 set_page_dirty(page);
496 i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj)
498 struct sg_page_iter sg_iter;
499 int page_count = obj->base.size >> PAGE_SHIFT;
502 if (obj->bit_17 == NULL) {
503 obj->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
504 sizeof(long), GFP_KERNEL);
505 if (obj->bit_17 == NULL) {
506 DRM_ERROR("Failed to allocate memory for bit 17 "
513 for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
514 if (page_to_phys(sg_page_iter_page(&sg_iter)) & (1 << 17))
515 __set_bit(i, obj->bit_17);
517 __clear_bit(i, obj->bit_17);