1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
32 #include <drm/i915_drm.h>
34 #include "i915_trace.h"
35 #include "intel_drv.h"
37 #include <linux/console.h>
38 #include <linux/module.h>
39 #include <drm/drm_crtc_helper.h>
41 static int i915_modeset __read_mostly = -1;
42 module_param_named(modeset, i915_modeset, int, 0400);
43 MODULE_PARM_DESC(modeset,
44 "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
45 "1=on, -1=force vga console preference [default])");
47 unsigned int i915_fbpercrtc __always_unused = 0;
48 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
50 int i915_panel_ignore_lid __read_mostly = 1;
51 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
52 MODULE_PARM_DESC(panel_ignore_lid,
53 "Override lid status (0=autodetect, 1=autodetect disabled [default], "
54 "-1=force lid closed, -2=force lid open)");
56 unsigned int i915_powersave __read_mostly = 1;
57 module_param_named(powersave, i915_powersave, int, 0600);
58 MODULE_PARM_DESC(powersave,
59 "Enable powersavings, fbc, downclocking, etc. (default: true)");
61 int i915_semaphores __read_mostly = -1;
62 module_param_named(semaphores, i915_semaphores, int, 0600);
63 MODULE_PARM_DESC(semaphores,
64 "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
66 int i915_enable_rc6 __read_mostly = -1;
67 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
68 MODULE_PARM_DESC(i915_enable_rc6,
69 "Enable power-saving render C-state 6. "
70 "Different stages can be selected via bitmask values "
71 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
72 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
73 "default: -1 (use per-chip default)");
75 int i915_enable_fbc __read_mostly = -1;
76 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
77 MODULE_PARM_DESC(i915_enable_fbc,
78 "Enable frame buffer compression for power savings "
79 "(default: -1 (use per-chip default))");
81 unsigned int i915_lvds_downclock __read_mostly = 0;
82 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
83 MODULE_PARM_DESC(lvds_downclock,
84 "Use panel (LVDS/eDP) downclocking for power savings "
87 int i915_lvds_channel_mode __read_mostly;
88 module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
89 MODULE_PARM_DESC(lvds_channel_mode,
90 "Specify LVDS channel mode "
91 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
93 int i915_panel_use_ssc __read_mostly = -1;
94 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
95 MODULE_PARM_DESC(lvds_use_ssc,
96 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
97 "(default: auto from VBT)");
99 int i915_vbt_sdvo_panel_type __read_mostly = -1;
100 module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
101 MODULE_PARM_DESC(vbt_sdvo_panel_type,
102 "Override/Ignore selection of SDVO panel mode in the VBT "
103 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
105 static bool i915_try_reset __read_mostly = true;
106 module_param_named(reset, i915_try_reset, bool, 0600);
107 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
109 bool i915_enable_hangcheck __read_mostly = true;
110 module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
111 MODULE_PARM_DESC(enable_hangcheck,
112 "Periodically check GPU activity for detecting hangs. "
113 "WARNING: Disabling this can cause system wide hangs. "
116 int i915_enable_ppgtt __read_mostly = -1;
117 module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
118 MODULE_PARM_DESC(i915_enable_ppgtt,
119 "Enable PPGTT (default: true)");
121 int i915_enable_psr __read_mostly = 0;
122 module_param_named(enable_psr, i915_enable_psr, int, 0600);
123 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
125 unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
126 module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
127 MODULE_PARM_DESC(preliminary_hw_support,
128 "Enable preliminary hardware support.");
130 int i915_disable_power_well __read_mostly = 1;
131 module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
132 MODULE_PARM_DESC(disable_power_well,
133 "Disable the power well when possible (default: true)");
135 int i915_enable_ips __read_mostly = 1;
136 module_param_named(enable_ips, i915_enable_ips, int, 0600);
137 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
139 bool i915_fastboot __read_mostly = 0;
140 module_param_named(fastboot, i915_fastboot, bool, 0600);
141 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
144 int i915_enable_pc8 __read_mostly = 1;
145 module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
146 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
148 int i915_pc8_timeout __read_mostly = 5000;
149 module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
150 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
152 bool i915_prefault_disable __read_mostly;
153 module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
154 MODULE_PARM_DESC(prefault_disable,
155 "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
157 static struct drm_driver driver;
158 extern int intel_agp_enabled;
160 static const struct intel_device_info intel_i830_info = {
161 .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
162 .has_overlay = 1, .overlay_needs_physical = 1,
163 .ring_mask = RENDER_RING,
166 static const struct intel_device_info intel_845g_info = {
167 .gen = 2, .num_pipes = 1,
168 .has_overlay = 1, .overlay_needs_physical = 1,
169 .ring_mask = RENDER_RING,
172 static const struct intel_device_info intel_i85x_info = {
173 .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
174 .cursor_needs_physical = 1,
175 .has_overlay = 1, .overlay_needs_physical = 1,
176 .ring_mask = RENDER_RING,
179 static const struct intel_device_info intel_i865g_info = {
180 .gen = 2, .num_pipes = 1,
181 .has_overlay = 1, .overlay_needs_physical = 1,
182 .ring_mask = RENDER_RING,
185 static const struct intel_device_info intel_i915g_info = {
186 .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
187 .has_overlay = 1, .overlay_needs_physical = 1,
188 .ring_mask = RENDER_RING,
190 static const struct intel_device_info intel_i915gm_info = {
191 .gen = 3, .is_mobile = 1, .num_pipes = 2,
192 .cursor_needs_physical = 1,
193 .has_overlay = 1, .overlay_needs_physical = 1,
195 .ring_mask = RENDER_RING,
197 static const struct intel_device_info intel_i945g_info = {
198 .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
199 .has_overlay = 1, .overlay_needs_physical = 1,
200 .ring_mask = RENDER_RING,
202 static const struct intel_device_info intel_i945gm_info = {
203 .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
204 .has_hotplug = 1, .cursor_needs_physical = 1,
205 .has_overlay = 1, .overlay_needs_physical = 1,
207 .ring_mask = RENDER_RING,
210 static const struct intel_device_info intel_i965g_info = {
211 .gen = 4, .is_broadwater = 1, .num_pipes = 2,
214 .ring_mask = RENDER_RING,
217 static const struct intel_device_info intel_i965gm_info = {
218 .gen = 4, .is_crestline = 1, .num_pipes = 2,
219 .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
222 .ring_mask = RENDER_RING,
225 static const struct intel_device_info intel_g33_info = {
226 .gen = 3, .is_g33 = 1, .num_pipes = 2,
227 .need_gfx_hws = 1, .has_hotplug = 1,
229 .ring_mask = RENDER_RING,
232 static const struct intel_device_info intel_g45_info = {
233 .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
234 .has_pipe_cxsr = 1, .has_hotplug = 1,
235 .ring_mask = RENDER_RING | BSD_RING,
238 static const struct intel_device_info intel_gm45_info = {
239 .gen = 4, .is_g4x = 1, .num_pipes = 2,
240 .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
241 .has_pipe_cxsr = 1, .has_hotplug = 1,
243 .ring_mask = RENDER_RING | BSD_RING,
246 static const struct intel_device_info intel_pineview_info = {
247 .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
248 .need_gfx_hws = 1, .has_hotplug = 1,
252 static const struct intel_device_info intel_ironlake_d_info = {
253 .gen = 5, .num_pipes = 2,
254 .need_gfx_hws = 1, .has_hotplug = 1,
255 .ring_mask = RENDER_RING | BSD_RING,
258 static const struct intel_device_info intel_ironlake_m_info = {
259 .gen = 5, .is_mobile = 1, .num_pipes = 2,
260 .need_gfx_hws = 1, .has_hotplug = 1,
262 .ring_mask = RENDER_RING | BSD_RING,
265 static const struct intel_device_info intel_sandybridge_d_info = {
266 .gen = 6, .num_pipes = 2,
267 .need_gfx_hws = 1, .has_hotplug = 1,
268 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
272 static const struct intel_device_info intel_sandybridge_m_info = {
273 .gen = 6, .is_mobile = 1, .num_pipes = 2,
274 .need_gfx_hws = 1, .has_hotplug = 1,
276 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
280 #define GEN7_FEATURES \
281 .gen = 7, .num_pipes = 3, \
282 .need_gfx_hws = 1, .has_hotplug = 1, \
283 .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
286 static const struct intel_device_info intel_ivybridge_d_info = {
291 static const struct intel_device_info intel_ivybridge_m_info = {
298 static const struct intel_device_info intel_ivybridge_q_info = {
301 .num_pipes = 0, /* legal, last one wins */
304 static const struct intel_device_info intel_valleyview_m_info = {
309 .display_mmio_offset = VLV_DISPLAY_BASE,
310 .has_llc = 0, /* legal, last one wins */
313 static const struct intel_device_info intel_valleyview_d_info = {
317 .display_mmio_offset = VLV_DISPLAY_BASE,
318 .has_llc = 0, /* legal, last one wins */
321 static const struct intel_device_info intel_haswell_d_info = {
326 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
329 static const struct intel_device_info intel_haswell_m_info = {
336 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
340 * Make sure any device matches here are from most specific to most
341 * general. For example, since the Quanta match is based on the subsystem
342 * and subvendor IDs, we need it to come before the more general IVB
343 * PCI ID matches, otherwise we'll use the wrong info struct above.
345 #define INTEL_PCI_IDS \
346 INTEL_I830_IDS(&intel_i830_info), \
347 INTEL_I845G_IDS(&intel_845g_info), \
348 INTEL_I85X_IDS(&intel_i85x_info), \
349 INTEL_I865G_IDS(&intel_i865g_info), \
350 INTEL_I915G_IDS(&intel_i915g_info), \
351 INTEL_I915GM_IDS(&intel_i915gm_info), \
352 INTEL_I945G_IDS(&intel_i945g_info), \
353 INTEL_I945GM_IDS(&intel_i945gm_info), \
354 INTEL_I965G_IDS(&intel_i965g_info), \
355 INTEL_G33_IDS(&intel_g33_info), \
356 INTEL_I965GM_IDS(&intel_i965gm_info), \
357 INTEL_GM45_IDS(&intel_gm45_info), \
358 INTEL_G45_IDS(&intel_g45_info), \
359 INTEL_PINEVIEW_IDS(&intel_pineview_info), \
360 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
361 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
362 INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
363 INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
364 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
365 INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
366 INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
367 INTEL_HSW_D_IDS(&intel_haswell_d_info), \
368 INTEL_HSW_M_IDS(&intel_haswell_m_info), \
369 INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
370 INTEL_VLV_D_IDS(&intel_valleyview_d_info)
372 static const struct pci_device_id pciidlist[] = { /* aka */
377 #if defined(CONFIG_DRM_I915_KMS)
378 MODULE_DEVICE_TABLE(pci, pciidlist);
381 void intel_detect_pch(struct drm_device *dev)
383 struct drm_i915_private *dev_priv = dev->dev_private;
386 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
387 * (which really amounts to a PCH but no South Display).
389 if (INTEL_INFO(dev)->num_pipes == 0) {
390 dev_priv->pch_type = PCH_NOP;
395 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
396 * make graphics device passthrough work easy for VMM, that only
397 * need to expose ISA bridge to let driver know the real hardware
398 * underneath. This is a requirement from virtualization team.
400 * In some virtualized environments (e.g. XEN), there is irrelevant
401 * ISA bridge in the system. To work reliably, we should scan trhough
402 * all the ISA bridge devices and check for the first match, instead
403 * of only checking the first one.
405 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
407 struct pci_dev *curr = pch;
408 if (pch->vendor == PCI_VENDOR_ID_INTEL) {
410 id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
411 dev_priv->pch_id = id;
413 if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
414 dev_priv->pch_type = PCH_IBX;
415 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
416 WARN_ON(!IS_GEN5(dev));
417 } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
418 dev_priv->pch_type = PCH_CPT;
419 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
420 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
421 } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
422 /* PantherPoint is CPT compatible */
423 dev_priv->pch_type = PCH_CPT;
424 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
425 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
426 } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
427 dev_priv->pch_type = PCH_LPT;
428 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
429 WARN_ON(!IS_HASWELL(dev));
430 WARN_ON(IS_ULT(dev));
431 } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
432 dev_priv->pch_type = PCH_LPT;
433 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
434 WARN_ON(!IS_HASWELL(dev));
435 WARN_ON(!IS_ULT(dev));
443 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
447 DRM_DEBUG_KMS("No PCH found?\n");
450 bool i915_semaphore_is_enabled(struct drm_device *dev)
452 if (INTEL_INFO(dev)->gen < 6)
455 if (i915_semaphores >= 0)
456 return i915_semaphores;
458 #ifdef CONFIG_INTEL_IOMMU
459 /* Enable semaphores on SNB when IO remapping is off */
460 if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
467 static int i915_drm_freeze(struct drm_device *dev)
469 struct drm_i915_private *dev_priv = dev->dev_private;
470 struct drm_crtc *crtc;
472 /* ignore lid events during suspend */
473 mutex_lock(&dev_priv->modeset_restore_lock);
474 dev_priv->modeset_restore = MODESET_SUSPENDED;
475 mutex_unlock(&dev_priv->modeset_restore_lock);
477 /* We do a lot of poking in a lot of registers, make sure they work
479 hsw_disable_package_c8(dev_priv);
480 intel_display_set_init_power(dev, true);
482 drm_kms_helper_poll_disable(dev);
484 pci_save_state(dev->pdev);
486 /* If KMS is active, we do the leavevt stuff here */
487 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
490 error = i915_gem_suspend(dev);
492 dev_err(&dev->pdev->dev,
493 "GEM idle failed, resume might fail\n");
497 cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
499 drm_irq_uninstall(dev);
500 dev_priv->enable_hotplug_processing = false;
502 * Disable CRTCs directly since we want to preserve sw state
505 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
506 dev_priv->display.crtc_disable(crtc);
508 intel_modeset_suspend_hw(dev);
511 i915_gem_suspend_gtt_mappings(dev);
513 i915_save_state(dev);
515 intel_opregion_fini(dev);
518 intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
524 int i915_suspend(struct drm_device *dev, pm_message_t state)
528 if (!dev || !dev->dev_private) {
529 DRM_ERROR("dev: %p\n", dev);
530 DRM_ERROR("DRM not initialized, aborting suspend.\n");
534 if (state.event == PM_EVENT_PRETHAW)
538 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
541 error = i915_drm_freeze(dev);
545 if (state.event == PM_EVENT_SUSPEND) {
546 /* Shut down the device */
547 pci_disable_device(dev->pdev);
548 pci_set_power_state(dev->pdev, PCI_D3hot);
554 void intel_console_resume(struct work_struct *work)
556 struct drm_i915_private *dev_priv =
557 container_of(work, struct drm_i915_private,
558 console_resume_work);
559 struct drm_device *dev = dev_priv->dev;
562 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
566 static void intel_resume_hotplug(struct drm_device *dev)
568 struct drm_mode_config *mode_config = &dev->mode_config;
569 struct intel_encoder *encoder;
571 mutex_lock(&mode_config->mutex);
572 DRM_DEBUG_KMS("running encoder hotplug functions\n");
574 list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
575 if (encoder->hot_plug)
576 encoder->hot_plug(encoder);
578 mutex_unlock(&mode_config->mutex);
580 /* Just fire off a uevent and let userspace tell us what to do */
581 drm_helper_hpd_irq_event(dev);
584 static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
586 struct drm_i915_private *dev_priv = dev->dev_private;
589 intel_uncore_early_sanitize(dev);
591 intel_uncore_sanitize(dev);
593 if (drm_core_check_feature(dev, DRIVER_MODESET) &&
594 restore_gtt_mappings) {
595 mutex_lock(&dev->struct_mutex);
596 i915_gem_restore_gtt_mappings(dev);
597 mutex_unlock(&dev->struct_mutex);
600 intel_power_domains_init_hw(dev);
602 i915_restore_state(dev);
603 intel_opregion_setup(dev);
605 /* KMS EnterVT equivalent */
606 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
607 intel_init_pch_refclk(dev);
609 mutex_lock(&dev->struct_mutex);
611 error = i915_gem_init_hw(dev);
612 mutex_unlock(&dev->struct_mutex);
614 /* We need working interrupts for modeset enabling ... */
615 drm_irq_install(dev);
617 intel_modeset_init_hw(dev);
619 drm_modeset_lock_all(dev);
620 intel_modeset_setup_hw_state(dev, true);
621 drm_modeset_unlock_all(dev);
624 * ... but also need to make sure that hotplug processing
625 * doesn't cause havoc. Like in the driver load code we don't
626 * bother with the tiny race here where we might loose hotplug
630 dev_priv->enable_hotplug_processing = true;
631 /* Config may have changed between suspend and resume */
632 intel_resume_hotplug(dev);
635 intel_opregion_init(dev);
638 * The console lock can be pretty contented on resume due
639 * to all the printk activity. Try to keep it out of the hot
640 * path of resume if possible.
642 if (console_trylock()) {
643 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
646 schedule_work(&dev_priv->console_resume_work);
649 /* Undo what we did at i915_drm_freeze so the refcount goes back to the
651 hsw_enable_package_c8(dev_priv);
653 mutex_lock(&dev_priv->modeset_restore_lock);
654 dev_priv->modeset_restore = MODESET_DONE;
655 mutex_unlock(&dev_priv->modeset_restore_lock);
659 static int i915_drm_thaw(struct drm_device *dev)
661 if (drm_core_check_feature(dev, DRIVER_MODESET))
662 i915_check_and_clear_faults(dev);
664 return __i915_drm_thaw(dev, true);
667 int i915_resume(struct drm_device *dev)
669 struct drm_i915_private *dev_priv = dev->dev_private;
672 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
675 if (pci_enable_device(dev->pdev))
678 pci_set_master(dev->pdev);
681 * Platforms with opregion should have sane BIOS, older ones (gen3 and
682 * earlier) need to restore the GTT mappings since the BIOS might clear
683 * all our scratch PTEs.
685 ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
689 drm_kms_helper_poll_enable(dev);
694 * i915_reset - reset chip after a hang
695 * @dev: drm device to reset
697 * Reset the chip. Useful if a hang is detected. Returns zero on successful
698 * reset or otherwise an error code.
700 * Procedure is fairly simple:
701 * - reset the chip using the reset reg
702 * - re-init context state
703 * - re-init hardware status page
704 * - re-init ring buffer
705 * - re-init interrupt state
708 int i915_reset(struct drm_device *dev)
710 drm_i915_private_t *dev_priv = dev->dev_private;
717 mutex_lock(&dev->struct_mutex);
721 simulated = dev_priv->gpu_error.stop_rings != 0;
723 ret = intel_gpu_reset(dev);
725 /* Also reset the gpu hangman. */
727 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
728 dev_priv->gpu_error.stop_rings = 0;
729 if (ret == -ENODEV) {
730 DRM_ERROR("Reset not implemented, but ignoring "
731 "error for simulated gpu hangs\n");
737 DRM_ERROR("Failed to reset chip.\n");
738 mutex_unlock(&dev->struct_mutex);
742 /* Ok, now get things going again... */
745 * Everything depends on having the GTT running, so we need to start
746 * there. Fortunately we don't need to do this unless we reset the
747 * chip at a PCI level.
749 * Next we need to restore the context, but we don't use those
752 * Ring buffer needs to be re-initialized in the KMS case, or if X
753 * was running at the time of the reset (i.e. we weren't VT
756 if (drm_core_check_feature(dev, DRIVER_MODESET) ||
757 !dev_priv->ums.mm_suspended) {
758 bool hw_contexts_disabled = dev_priv->hw_contexts_disabled;
759 dev_priv->ums.mm_suspended = 0;
761 ret = i915_gem_init_hw(dev);
762 if (!hw_contexts_disabled && dev_priv->hw_contexts_disabled)
763 DRM_ERROR("HW contexts didn't survive reset\n");
764 mutex_unlock(&dev->struct_mutex);
766 DRM_ERROR("Failed hw init on reset %d\n", ret);
770 drm_irq_uninstall(dev);
771 drm_irq_install(dev);
774 mutex_unlock(&dev->struct_mutex);
780 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
782 struct intel_device_info *intel_info =
783 (struct intel_device_info *) ent->driver_data;
785 if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
786 DRM_INFO("This hardware requires preliminary hardware support.\n"
787 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
791 /* Only bind to function 0 of the device. Early generations
792 * used function 1 as a placeholder for multi-head. This causes
793 * us confusion instead, especially on the systems where both
794 * functions have the same PCI-ID!
796 if (PCI_FUNC(pdev->devfn))
799 /* We've managed to ship a kms-enabled ddx that shipped with an XvMC
800 * implementation for gen3 (and only gen3) that used legacy drm maps
801 * (gasp!) to share buffers between X and the client. Hence we need to
802 * keep around the fake agp stuff for gen3, even when kms is enabled. */
803 if (intel_info->gen != 3) {
804 driver.driver_features &=
805 ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
806 } else if (!intel_agp_enabled) {
807 DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
811 return drm_get_pci_dev(pdev, ent, &driver);
815 i915_pci_remove(struct pci_dev *pdev)
817 struct drm_device *dev = pci_get_drvdata(pdev);
822 static int i915_pm_suspend(struct device *dev)
824 struct pci_dev *pdev = to_pci_dev(dev);
825 struct drm_device *drm_dev = pci_get_drvdata(pdev);
828 if (!drm_dev || !drm_dev->dev_private) {
829 dev_err(dev, "DRM not initialized, aborting suspend.\n");
833 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
836 error = i915_drm_freeze(drm_dev);
840 pci_disable_device(pdev);
841 pci_set_power_state(pdev, PCI_D3hot);
846 static int i915_pm_resume(struct device *dev)
848 struct pci_dev *pdev = to_pci_dev(dev);
849 struct drm_device *drm_dev = pci_get_drvdata(pdev);
851 return i915_resume(drm_dev);
854 static int i915_pm_freeze(struct device *dev)
856 struct pci_dev *pdev = to_pci_dev(dev);
857 struct drm_device *drm_dev = pci_get_drvdata(pdev);
859 if (!drm_dev || !drm_dev->dev_private) {
860 dev_err(dev, "DRM not initialized, aborting suspend.\n");
864 return i915_drm_freeze(drm_dev);
867 static int i915_pm_thaw(struct device *dev)
869 struct pci_dev *pdev = to_pci_dev(dev);
870 struct drm_device *drm_dev = pci_get_drvdata(pdev);
872 return i915_drm_thaw(drm_dev);
875 static int i915_pm_poweroff(struct device *dev)
877 struct pci_dev *pdev = to_pci_dev(dev);
878 struct drm_device *drm_dev = pci_get_drvdata(pdev);
880 return i915_drm_freeze(drm_dev);
883 static const struct dev_pm_ops i915_pm_ops = {
884 .suspend = i915_pm_suspend,
885 .resume = i915_pm_resume,
886 .freeze = i915_pm_freeze,
887 .thaw = i915_pm_thaw,
888 .poweroff = i915_pm_poweroff,
889 .restore = i915_pm_resume,
892 static const struct vm_operations_struct i915_gem_vm_ops = {
893 .fault = i915_gem_fault,
894 .open = drm_gem_vm_open,
895 .close = drm_gem_vm_close,
898 static const struct file_operations i915_driver_fops = {
899 .owner = THIS_MODULE,
901 .release = drm_release,
902 .unlocked_ioctl = drm_ioctl,
903 .mmap = drm_gem_mmap,
907 .compat_ioctl = i915_compat_ioctl,
909 .llseek = noop_llseek,
912 static struct drm_driver driver = {
913 /* Don't use MTRRs here; the Xserver or userspace app should
914 * deal with them for Intel hardware.
917 DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
918 DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
920 .load = i915_driver_load,
921 .unload = i915_driver_unload,
922 .open = i915_driver_open,
923 .lastclose = i915_driver_lastclose,
924 .preclose = i915_driver_preclose,
925 .postclose = i915_driver_postclose,
927 /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
928 .suspend = i915_suspend,
929 .resume = i915_resume,
931 .device_is_agp = i915_driver_device_is_agp,
932 .master_create = i915_master_create,
933 .master_destroy = i915_master_destroy,
934 #if defined(CONFIG_DEBUG_FS)
935 .debugfs_init = i915_debugfs_init,
936 .debugfs_cleanup = i915_debugfs_cleanup,
938 .gem_free_object = i915_gem_free_object,
939 .gem_vm_ops = &i915_gem_vm_ops,
941 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
942 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
943 .gem_prime_export = i915_gem_prime_export,
944 .gem_prime_import = i915_gem_prime_import,
946 .dumb_create = i915_gem_dumb_create,
947 .dumb_map_offset = i915_gem_mmap_gtt,
948 .dumb_destroy = drm_gem_dumb_destroy,
949 .ioctls = i915_ioctls,
950 .fops = &i915_driver_fops,
954 .major = DRIVER_MAJOR,
955 .minor = DRIVER_MINOR,
956 .patchlevel = DRIVER_PATCHLEVEL,
959 static struct pci_driver i915_pci_driver = {
961 .id_table = pciidlist,
962 .probe = i915_pci_probe,
963 .remove = i915_pci_remove,
964 .driver.pm = &i915_pm_ops,
967 static int __init i915_init(void)
969 driver.num_ioctls = i915_max_ioctl;
972 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
973 * explicitly disabled with the module pararmeter.
975 * Otherwise, just follow the parameter (defaulting to off).
977 * Allow optional vga_text_mode_force boot option to override
978 * the default behavior.
980 #if defined(CONFIG_DRM_I915_KMS)
981 if (i915_modeset != 0)
982 driver.driver_features |= DRIVER_MODESET;
984 if (i915_modeset == 1)
985 driver.driver_features |= DRIVER_MODESET;
987 #ifdef CONFIG_VGA_CONSOLE
988 if (vgacon_text_force() && i915_modeset == -1)
989 driver.driver_features &= ~DRIVER_MODESET;
992 if (!(driver.driver_features & DRIVER_MODESET))
993 driver.get_vblank_timestamp = NULL;
995 return drm_pci_init(&driver, &i915_pci_driver);
998 static void __exit i915_exit(void)
1000 drm_pci_exit(&driver, &i915_pci_driver);
1003 module_init(i915_init);
1004 module_exit(i915_exit);
1006 MODULE_AUTHOR(DRIVER_AUTHOR);
1007 MODULE_DESCRIPTION(DRIVER_DESC);
1008 MODULE_LICENSE("GPL and additional rights");