drivers/gpu/drm/exynos/exynos_drm_fimd.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /* exynos_drm_fimd.c
   3  *
   4  * Copyright (C) 2011 Samsung Electronics Co.Ltd
   5  * Authors:
   6  *      Joonyoung Shim <jy0922.shim@samsung.com>
   7  *      Inki Dae <inki.dae@samsung.com>
   8  */
   9
  10 #include <linux/clk.h>
  11 #include <linux/component.h>
  12 #include <linux/kernel.h>
  13 #include <linux/mfd/syscon.h>
  14 #include <linux/of.h>
  15 #include <linux/of_device.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/pm_runtime.h>
  18 #include <linux/regmap.h>
  19
  20 #include <video/of_display_timing.h>
  21 #include <video/of_videomode.h>
  22 #include <video/samsung_fimd.h>
  23
  24 #include <drm/drm_fourcc.h>
  25 #include <drm/drm_vblank.h>
  26 #include <drm/exynos_drm.h>
  27
  28 #include "exynos_drm_crtc.h"
  29 #include "exynos_drm_drv.h"
  30 #include "exynos_drm_fb.h"
  31 #include "exynos_drm_plane.h"
  32
  33 /*
  34  * FIMD stands for Fully Interactive Mobile Display and
  35  * as a display controller, it transfers contents drawn on memory
  36  * to a LCD Panel through Display Interfaces such as RGB or
  37  * CPU Interface.
  38  */
  39
  40 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
  41
  42 /* position control register for hardware window 0, 2 ~ 4.*/
  43 #define VIDOSD_A(win)           (VIDOSD_BASE + 0x00 + (win) * 16)
  44 #define VIDOSD_B(win)           (VIDOSD_BASE + 0x04 + (win) * 16)
  45 /*
  46  * size control register for hardware windows 0 and alpha control register
  47  * for hardware windows 1 ~ 4
  48  */
  49 #define VIDOSD_C(win)           (VIDOSD_BASE + 0x08 + (win) * 16)
  50 /* size control register for hardware windows 1 ~ 2. */
  51 #define VIDOSD_D(win)           (VIDOSD_BASE + 0x0C + (win) * 16)
  52
  53 #define VIDWnALPHA0(win)        (VIDW_ALPHA + 0x00 + (win) * 8)
  54 #define VIDWnALPHA1(win)        (VIDW_ALPHA + 0x04 + (win) * 8)
  55
  56 #define VIDWx_BUF_START(win, buf)       (VIDW_BUF_START(buf) + (win) * 8)
  57 #define VIDWx_BUF_START_S(win, buf)     (VIDW_BUF_START_S(buf) + (win) * 8)
  58 #define VIDWx_BUF_END(win, buf)         (VIDW_BUF_END(buf) + (win) * 8)
  59 #define VIDWx_BUF_SIZE(win, buf)        (VIDW_BUF_SIZE(buf) + (win) * 4)
  60
  61 /* color key control register for hardware window 1 ~ 4. */
  62 #define WKEYCON0_BASE(x)                ((WKEYCON0 + 0x140) + ((x - 1) * 8))
  63 /* color key value register for hardware window 1 ~ 4. */
  64 #define WKEYCON1_BASE(x)                ((WKEYCON1 + 0x140) + ((x - 1) * 8))
  65
  66 /* I80 trigger control register */
  67 #define TRIGCON                         0x1A4
  68 #define TRGMODE_ENABLE                  (1 << 0)
  69 #define SWTRGCMD_ENABLE                 (1 << 1)
  70 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */
  71 #define HWTRGEN_ENABLE                  (1 << 3)
  72 #define HWTRGMASK_ENABLE                (1 << 4)
  73 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */
  74 #define HWTRIGEN_PER_ENABLE             (1 << 31)
  75
  76 /* display mode change control register except exynos4 */
  77 #define VIDOUT_CON                      0x000
  78 #define VIDOUT_CON_F_I80_LDI0           (0x2 << 8)
  79
  80 /* I80 interface control for main LDI register */
  81 #define I80IFCONFAx(x)                  (0x1B0 + (x) * 4)
  82 #define I80IFCONFBx(x)                  (0x1B8 + (x) * 4)
  83 #define LCD_CS_SETUP(x)                 ((x) << 16)
  84 #define LCD_WR_SETUP(x)                 ((x) << 12)
  85 #define LCD_WR_ACTIVE(x)                ((x) << 8)
  86 #define LCD_WR_HOLD(x)                  ((x) << 4)
  87 #define I80IFEN_ENABLE                  (1 << 0)
  88
  89 /* FIMD has totally five hardware windows. */
  90 #define WINDOWS_NR      5
  91
  92 /* HW trigger flag on i80 panel. */
  93 #define I80_HW_TRG     (1 << 1)
  94
  95 struct fimd_driver_data {
  96         unsigned int timing_base;
  97         unsigned int lcdblk_offset;
  98         unsigned int lcdblk_vt_shift;
  99         unsigned int lcdblk_bypass_shift;
 100         unsigned int lcdblk_mic_bypass_shift;
 101         unsigned int trg_type;
 102
 103         unsigned int has_shadowcon:1;
 104         unsigned int has_clksel:1;
 105         unsigned int has_limited_fmt:1;
 106         unsigned int has_vidoutcon:1;
 107         unsigned int has_vtsel:1;
 108         unsigned int has_mic_bypass:1;
 109         unsigned int has_dp_clk:1;
 110         unsigned int has_hw_trigger:1;
 111         unsigned int has_trigger_per_te:1;
 112 };
 113
 114 static struct fimd_driver_data s3c64xx_fimd_driver_data = {
 115         .timing_base = 0x0,
 116         .has_clksel = 1,
 117         .has_limited_fmt = 1,
 118 };
 119
 120 static struct fimd_driver_data s5pv210_fimd_driver_data = {
 121         .timing_base = 0x0,
 122         .has_shadowcon = 1,
 123         .has_clksel = 1,
 124 };
 125
 126 static struct fimd_driver_data exynos3_fimd_driver_data = {
 127         .timing_base = 0x20000,
 128         .lcdblk_offset = 0x210,
 129         .lcdblk_bypass_shift = 1,
 130         .has_shadowcon = 1,
 131         .has_vidoutcon = 1,
 132 };
 133
 134 static struct fimd_driver_data exynos4_fimd_driver_data = {
 135         .timing_base = 0x0,
 136         .lcdblk_offset = 0x210,
 137         .lcdblk_vt_shift = 10,
 138         .lcdblk_bypass_shift = 1,
 139         .has_shadowcon = 1,
 140         .has_vtsel = 1,
 141 };
 142
 143 static struct fimd_driver_data exynos5_fimd_driver_data = {
 144         .timing_base = 0x20000,
 145         .lcdblk_offset = 0x214,
 146         .lcdblk_vt_shift = 24,
 147         .lcdblk_bypass_shift = 15,
 148         .has_shadowcon = 1,
 149         .has_vidoutcon = 1,
 150         .has_vtsel = 1,
 151         .has_dp_clk = 1,
 152 };
 153
 154 static struct fimd_driver_data exynos5420_fimd_driver_data = {
 155         .timing_base = 0x20000,
 156         .lcdblk_offset = 0x214,
 157         .lcdblk_vt_shift = 24,
 158         .lcdblk_bypass_shift = 15,
 159         .lcdblk_mic_bypass_shift = 11,
 160         .has_shadowcon = 1,
 161         .has_vidoutcon = 1,
 162         .has_vtsel = 1,
 163         .has_mic_bypass = 1,
 164         .has_dp_clk = 1,
 165 };
 166
 167 struct fimd_context {
 168         struct device                   *dev;
 169         struct drm_device               *drm_dev;
 170         void                            *dma_priv;
 171         struct exynos_drm_crtc          *crtc;
 172         struct exynos_drm_plane         planes[WINDOWS_NR];
 173         struct exynos_drm_plane_config  configs[WINDOWS_NR];
 174         struct clk                      *bus_clk;
 175         struct clk                      *lcd_clk;
 176         void __iomem                    *regs;
 177         struct regmap                   *sysreg;
 178         unsigned long                   irq_flags;
 179         u32                             vidcon0;
 180         u32                             vidcon1;
 181         u32                             vidout_con;
 182         u32                             i80ifcon;
 183         bool                            i80_if;
 184         bool                            suspended;
 185         wait_queue_head_t               wait_vsync_queue;
 186         atomic_t                        wait_vsync_event;
 187         atomic_t                        win_updated;
 188         atomic_t                        triggering;
 189         u32                             clkdiv;
 190
 191         const struct fimd_driver_data *driver_data;
 192         struct drm_encoder *encoder;
 193         struct exynos_drm_clk           dp_clk;
 194 };
 195
 196 static const struct of_device_id fimd_driver_dt_match[] = {
 197         { .compatible = "samsung,s3c6400-fimd",
 198           .data = &s3c64xx_fimd_driver_data },
 199         { .compatible = "samsung,s5pv210-fimd",
 200           .data = &s5pv210_fimd_driver_data },
 201         { .compatible = "samsung,exynos3250-fimd",
 202           .data = &exynos3_fimd_driver_data },
 203         { .compatible = "samsung,exynos4210-fimd",
 204           .data = &exynos4_fimd_driver_data },
 205         { .compatible = "samsung,exynos5250-fimd",
 206           .data = &exynos5_fimd_driver_data },
 207         { .compatible = "samsung,exynos5420-fimd",
 208           .data = &exynos5420_fimd_driver_data },
 209         {},
 210 };
 211 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
 212
 213 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = {
 214         DRM_PLANE_TYPE_PRIMARY,
 215         DRM_PLANE_TYPE_OVERLAY,
 216         DRM_PLANE_TYPE_OVERLAY,
 217         DRM_PLANE_TYPE_OVERLAY,
 218         DRM_PLANE_TYPE_CURSOR,
 219 };
 220
 221 static const uint32_t fimd_formats[] = {
 222         DRM_FORMAT_C8,
 223         DRM_FORMAT_XRGB1555,
 224         DRM_FORMAT_RGB565,
 225         DRM_FORMAT_XRGB8888,
 226         DRM_FORMAT_ARGB8888,
 227 };
 228
 229 static const unsigned int capabilities[WINDOWS_NR] = {
 230         0,
 231         EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
 232         EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
 233         EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
 234         EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
 235 };
 236
 237 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask,
 238                                  u32 val)
 239 {
 240         val = (val & mask) | (readl(ctx->regs + reg) & ~mask);
 241         writel(val, ctx->regs + reg);
 242 }
 243
 244 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
 245 {
 246         struct fimd_context *ctx = crtc->ctx;
 247         u32 val;
 248
 249         if (ctx->suspended)
 250                 return -EPERM;
 251
 252         if (!test_and_set_bit(0, &ctx->irq_flags)) {
 253                 val = readl(ctx->regs + VIDINTCON0);
 254
 255                 val |= VIDINTCON0_INT_ENABLE;
 256
 257                 if (ctx->i80_if) {
 258                         val |= VIDINTCON0_INT_I80IFDONE;
 259                         val |= VIDINTCON0_INT_SYSMAINCON;
 260                         val &= ~VIDINTCON0_INT_SYSSUBCON;
 261                 } else {
 262                         val |= VIDINTCON0_INT_FRAME;
 263
 264                         val &= ~VIDINTCON0_FRAMESEL0_MASK;
 265                         val |= VIDINTCON0_FRAMESEL0_FRONTPORCH;
 266                         val &= ~VIDINTCON0_FRAMESEL1_MASK;
 267                         val |= VIDINTCON0_FRAMESEL1_NONE;
 268                 }
 269
 270                 writel(val, ctx->regs + VIDINTCON0);
 271         }
 272
 273         return 0;
 274 }
 275
 276 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
 277 {
 278         struct fimd_context *ctx = crtc->ctx;
 279         u32 val;
 280
 281         if (ctx->suspended)
 282                 return;
 283
 284         if (test_and_clear_bit(0, &ctx->irq_flags)) {
 285                 val = readl(ctx->regs + VIDINTCON0);
 286
 287                 val &= ~VIDINTCON0_INT_ENABLE;
 288
 289                 if (ctx->i80_if) {
 290                         val &= ~VIDINTCON0_INT_I80IFDONE;
 291                         val &= ~VIDINTCON0_INT_SYSMAINCON;
 292                         val &= ~VIDINTCON0_INT_SYSSUBCON;
 293                 } else
 294                         val &= ~VIDINTCON0_INT_FRAME;
 295
 296                 writel(val, ctx->regs + VIDINTCON0);
 297         }
 298 }
 299
 300 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
 301 {
 302         struct fimd_context *ctx = crtc->ctx;
 303
 304         if (ctx->suspended)
 305                 return;
 306
 307         atomic_set(&ctx->wait_vsync_event, 1);
 308
 309         /*
 310          * wait for FIMD to signal VSYNC interrupt or return after
 311          * timeout which is set to 50ms (refresh rate of 20).
 312          */
 313         if (!wait_event_timeout(ctx->wait_vsync_queue,
 314                                 !atomic_read(&ctx->wait_vsync_event),
 315                                 HZ/20))
 316                 DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
 317 }
 318
 319 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
 320                                         bool enable)
 321 {
 322         u32 val = readl(ctx->regs + WINCON(win));
 323
 324         if (enable)
 325                 val |= WINCONx_ENWIN;
 326         else
 327                 val &= ~WINCONx_ENWIN;
 328
 329         writel(val, ctx->regs + WINCON(win));
 330 }
 331
 332 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
 333                                                 unsigned int win,
 334                                                 bool enable)
 335 {
 336         u32 val = readl(ctx->regs + SHADOWCON);
 337
 338         if (enable)
 339                 val |= SHADOWCON_CHx_ENABLE(win);
 340         else
 341                 val &= ~SHADOWCON_CHx_ENABLE(win);
 342
 343         writel(val, ctx->regs + SHADOWCON);
 344 }
 345
 346 static int fimd_clear_channels(struct exynos_drm_crtc *crtc)
 347 {
 348         struct fimd_context *ctx = crtc->ctx;
 349         unsigned int win, ch_enabled = 0;
 350         int ret;
 351
 352         /* Hardware is in unknown state, so ensure it gets enabled properly */
 353         ret = pm_runtime_resume_and_get(ctx->dev);
 354         if (ret < 0) {
 355                 dev_err(ctx->dev, "failed to enable FIMD device.\n");
 356                 return ret;
 357         }
 358
 359         clk_prepare_enable(ctx->bus_clk);
 360         clk_prepare_enable(ctx->lcd_clk);
 361
 362         /* Check if any channel is enabled. */
 363         for (win = 0; win < WINDOWS_NR; win++) {
 364                 u32 val = readl(ctx->regs + WINCON(win));
 365
 366                 if (val & WINCONx_ENWIN) {
 367                         fimd_enable_video_output(ctx, win, false);
 368
 369                         if (ctx->driver_data->has_shadowcon)
 370                                 fimd_enable_shadow_channel_path(ctx, win,
 371                                                                 false);
 372
 373                         ch_enabled = 1;
 374                 }
 375         }
 376
 377         /* Wait for vsync, as disable channel takes effect at next vsync */
 378         if (ch_enabled) {
 379                 ctx->suspended = false;
 380
 381                 fimd_enable_vblank(ctx->crtc);
 382                 fimd_wait_for_vblank(ctx->crtc);
 383                 fimd_disable_vblank(ctx->crtc);
 384
 385                 ctx->suspended = true;
 386         }
 387
 388         clk_disable_unprepare(ctx->lcd_clk);
 389         clk_disable_unprepare(ctx->bus_clk);
 390
 391         pm_runtime_put(ctx->dev);
 392
 393         return 0;
 394 }
 395
 396
 397 static int fimd_atomic_check(struct exynos_drm_crtc *crtc,
 398                 struct drm_crtc_state *state)
 399 {
 400         struct drm_display_mode *mode = &state->adjusted_mode;
 401         struct fimd_context *ctx = crtc->ctx;
 402         unsigned long ideal_clk, lcd_rate;
 403         u32 clkdiv;
 404
 405         if (mode->clock == 0) {
 406                 DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n");
 407                 return -EINVAL;
 408         }
 409
 410         ideal_clk = mode->clock * 1000;
 411
 412         if (ctx->i80_if) {
 413                 /*
 414                  * The frame done interrupt should be occurred prior to the
 415                  * next TE signal.
 416                  */
 417                 ideal_clk *= 2;
 418         }
 419
 420         lcd_rate = clk_get_rate(ctx->lcd_clk);
 421         if (2 * lcd_rate < ideal_clk) {
 422                 DRM_DEV_ERROR(ctx->dev,
 423                               "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n",
 424                               lcd_rate, ideal_clk);
 425                 return -EINVAL;
 426         }
 427
 428         /* Find the clock divider value that gets us closest to ideal_clk */
 429         clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk);
 430         if (clkdiv >= 0x200) {
 431                 DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n",
 432                               ideal_clk);
 433                 return -EINVAL;
 434         }
 435
 436         ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff;
 437
 438         return 0;
 439 }
 440
 441 static void fimd_setup_trigger(struct fimd_context *ctx)
 442 {
 443         void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base;
 444         u32 trg_type = ctx->driver_data->trg_type;
 445         u32 val = readl(timing_base + TRIGCON);
 446
 447         val &= ~(TRGMODE_ENABLE);
 448
 449         if (trg_type == I80_HW_TRG) {
 450                 if (ctx->driver_data->has_hw_trigger)
 451                         val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE;
 452                 if (ctx->driver_data->has_trigger_per_te)
 453                         val |= HWTRIGEN_PER_ENABLE;
 454         } else {
 455                 val |= TRGMODE_ENABLE;
 456         }
 457
 458         writel(val, timing_base + TRIGCON);
 459 }
 460
 461 static void fimd_commit(struct exynos_drm_crtc *crtc)
 462 {
 463         struct fimd_context *ctx = crtc->ctx;
 464         struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
 465         const struct fimd_driver_data *driver_data = ctx->driver_data;
 466         void *timing_base = ctx->regs + driver_data->timing_base;
 467         u32 val;
 468
 469         if (ctx->suspended)
 470                 return;
 471
 472         /* nothing to do if we haven't set the mode yet */
 473         if (mode->htotal == 0 || mode->vtotal == 0)
 474                 return;
 475
 476         if (ctx->i80_if) {
 477                 val = ctx->i80ifcon | I80IFEN_ENABLE;
 478                 writel(val, timing_base + I80IFCONFAx(0));
 479
 480                 /* disable auto frame rate */
 481                 writel(0, timing_base + I80IFCONFBx(0));
 482
 483                 /* set video type selection to I80 interface */
 484                 if (driver_data->has_vtsel && ctx->sysreg &&
 485                                 regmap_update_bits(ctx->sysreg,
 486                                         driver_data->lcdblk_offset,
 487                                         0x3 << driver_data->lcdblk_vt_shift,
 488                                         0x1 << driver_data->lcdblk_vt_shift)) {
 489                         DRM_DEV_ERROR(ctx->dev,
 490                                       "Failed to update sysreg for I80 i/f.\n");
 491                         return;
 492                 }
 493         } else {
 494                 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
 495                 u32 vidcon1;
 496
 497                 /* setup polarity values */
 498                 vidcon1 = ctx->vidcon1;
 499                 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 500                         vidcon1 |= VIDCON1_INV_VSYNC;
 501                 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 502                         vidcon1 |= VIDCON1_INV_HSYNC;
 503                 writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
 504
 505                 /* setup vertical timing values. */
 506                 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
 507                 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
 508                 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
 509
 510                 val = VIDTCON0_VBPD(vbpd - 1) |
 511                         VIDTCON0_VFPD(vfpd - 1) |
 512                         VIDTCON0_VSPW(vsync_len - 1);
 513                 writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
 514
 515                 /* setup horizontal timing values.  */
 516                 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
 517                 hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
 518                 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
 519
 520                 val = VIDTCON1_HBPD(hbpd - 1) |
 521                         VIDTCON1_HFPD(hfpd - 1) |
 522                         VIDTCON1_HSPW(hsync_len - 1);
 523                 writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
 524         }
 525
 526         if (driver_data->has_vidoutcon)
 527                 writel(ctx->vidout_con, timing_base + VIDOUT_CON);
 528
 529         /* set bypass selection */
 530         if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
 531                                 driver_data->lcdblk_offset,
 532                                 0x1 << driver_data->lcdblk_bypass_shift,
 533                                 0x1 << driver_data->lcdblk_bypass_shift)) {
 534                 DRM_DEV_ERROR(ctx->dev,
 535                               "Failed to update sysreg for bypass setting.\n");
 536                 return;
 537         }
 538
 539         /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
 540          * bit should be cleared.
 541          */
 542         if (driver_data->has_mic_bypass && ctx->sysreg &&
 543             regmap_update_bits(ctx->sysreg,
 544                                 driver_data->lcdblk_offset,
 545                                 0x1 << driver_data->lcdblk_mic_bypass_shift,
 546                                 0x1 << driver_data->lcdblk_mic_bypass_shift)) {
 547                 DRM_DEV_ERROR(ctx->dev,
 548                               "Failed to update sysreg for bypass mic.\n");
 549                 return;
 550         }
 551
 552         /* setup horizontal and vertical display size. */
 553         val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
 554                VIDTCON2_HOZVAL(mode->hdisplay - 1) |
 555                VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
 556                VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
 557         writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
 558
 559         fimd_setup_trigger(ctx);
 560
 561         /*
 562          * fields of register with prefix '_F' would be updated
 563          * at vsync(same as dma start)
 564          */
 565         val = ctx->vidcon0;
 566         val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
 567
 568         if (ctx->driver_data->has_clksel)
 569                 val |= VIDCON0_CLKSEL_LCD;
 570
 571         if (ctx->clkdiv > 1)
 572                 val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
 573
 574         writel(val, ctx->regs + VIDCON0);
 575 }
 576
 577 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win,
 578                                unsigned int alpha, unsigned int pixel_alpha)
 579 {
 580         u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf);
 581         u32 val = 0;
 582
 583         switch (pixel_alpha) {
 584         case DRM_MODE_BLEND_PIXEL_NONE:
 585         case DRM_MODE_BLEND_COVERAGE:
 586                 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A);
 587                 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
 588                 break;
 589         case DRM_MODE_BLEND_PREMULTI:
 590         default:
 591                 if (alpha != DRM_BLEND_ALPHA_OPAQUE) {
 592                         val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0);
 593                         val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
 594                 } else {
 595                         val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE);
 596                         val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
 597                 }
 598                 break;
 599         }
 600         fimd_set_bits(ctx, BLENDEQx(win), mask, val);
 601 }
 602
 603 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win,
 604                                 unsigned int alpha, unsigned int pixel_alpha)
 605 {
 606         u32 win_alpha_l = (alpha >> 8) & 0xf;
 607         u32 win_alpha_h = alpha >> 12;
 608         u32 val = 0;
 609
 610         switch (pixel_alpha) {
 611         case DRM_MODE_BLEND_PIXEL_NONE:
 612                 break;
 613         case DRM_MODE_BLEND_COVERAGE:
 614         case DRM_MODE_BLEND_PREMULTI:
 615         default:
 616                 val |= WINCON1_ALPHA_SEL;
 617                 val |= WINCON1_BLD_PIX;
 618                 val |= WINCON1_ALPHA_MUL;
 619                 break;
 620         }
 621         fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val);
 622
 623         /* OSD alpha */
 624         val = VIDISD14C_ALPHA0_R(win_alpha_h) |
 625                 VIDISD14C_ALPHA0_G(win_alpha_h) |
 626                 VIDISD14C_ALPHA0_B(win_alpha_h) |
 627                 VIDISD14C_ALPHA1_R(0x0) |
 628                 VIDISD14C_ALPHA1_G(0x0) |
 629                 VIDISD14C_ALPHA1_B(0x0);
 630         writel(val, ctx->regs + VIDOSD_C(win));
 631
 632         val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) |
 633                 VIDW_ALPHA_B(win_alpha_l);
 634         writel(val, ctx->regs + VIDWnALPHA0(win));
 635
 636         val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) |
 637                 VIDW_ALPHA_B(0x0);
 638         writel(val, ctx->regs + VIDWnALPHA1(win));
 639
 640         fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK,
 641                         BLENDCON_NEW_8BIT_ALPHA_VALUE);
 642 }
 643
 644 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
 645                                 struct drm_framebuffer *fb, int width)
 646 {
 647         struct exynos_drm_plane plane = ctx->planes[win];
 648         struct exynos_drm_plane_state *state =
 649                 to_exynos_plane_state(plane.base.state);
 650         uint32_t pixel_format = fb->format->format;
 651         unsigned int alpha = state->base.alpha;
 652         u32 val = WINCONx_ENWIN;
 653         unsigned int pixel_alpha;
 654
 655         if (fb->format->has_alpha)
 656                 pixel_alpha = state->base.pixel_blend_mode;
 657         else
 658                 pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE;
 659
 660         /*
 661          * In case of s3c64xx, window 0 doesn't support alpha channel.
 662          * So the request format is ARGB8888 then change it to XRGB8888.
 663          */
 664         if (ctx->driver_data->has_limited_fmt && !win) {
 665                 if (pixel_format == DRM_FORMAT_ARGB8888)
 666                         pixel_format = DRM_FORMAT_XRGB8888;
 667         }
 668
 669         switch (pixel_format) {
 670         case DRM_FORMAT_C8:
 671                 val |= WINCON0_BPPMODE_8BPP_PALETTE;
 672                 val |= WINCONx_BURSTLEN_8WORD;
 673                 val |= WINCONx_BYTSWP;
 674                 break;
 675         case DRM_FORMAT_XRGB1555:
 676                 val |= WINCON0_BPPMODE_16BPP_1555;
 677                 val |= WINCONx_HAWSWP;
 678                 val |= WINCONx_BURSTLEN_16WORD;
 679                 break;
 680         case DRM_FORMAT_RGB565:
 681                 val |= WINCON0_BPPMODE_16BPP_565;
 682                 val |= WINCONx_HAWSWP;
 683                 val |= WINCONx_BURSTLEN_16WORD;
 684                 break;
 685         case DRM_FORMAT_XRGB8888:
 686                 val |= WINCON0_BPPMODE_24BPP_888;
 687                 val |= WINCONx_WSWP;
 688                 val |= WINCONx_BURSTLEN_16WORD;
 689                 break;
 690         case DRM_FORMAT_ARGB8888:
 691         default:
 692                 val |= WINCON1_BPPMODE_25BPP_A1888;
 693                 val |= WINCONx_WSWP;
 694                 val |= WINCONx_BURSTLEN_16WORD;
 695                 break;
 696         }
 697
 698         /*
 699          * Setting dma-burst to 16Word causes permanent tearing for very small
 700          * buffers, e.g. cursor buffer. Burst Mode switching which based on
 701          * plane size is not recommended as plane size varies alot towards the
 702          * end of the screen and rapid movement causes unstable DMA, but it is
 703          * still better to change dma-burst than displaying garbage.
 704          */
 705
 706         if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
 707                 val &= ~WINCONx_BURSTLEN_MASK;
 708                 val |= WINCONx_BURSTLEN_4WORD;
 709         }
 710         fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val);
 711
 712         /* hardware window 0 doesn't support alpha channel. */
 713         if (win != 0) {
 714                 fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha);
 715                 fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha);
 716         }
 717 }
 718
 719 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
 720 {
 721         unsigned int keycon0 = 0, keycon1 = 0;
 722
 723         keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
 724                         WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
 725
 726         keycon1 = WxKEYCON1_COLVAL(0xffffffff);
 727
 728         writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
 729         writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
 730 }
 731
 732 /**
 733  * fimd_shadow_protect_win() - disable updating values from shadow registers at vsync
 734  *
 735  * @ctx: local driver data
 736  * @win: window to protect registers for
 737  * @protect: 1 to protect (disable updates)
 738  */
 739 static void fimd_shadow_protect_win(struct fimd_context *ctx,
 740                                     unsigned int win, bool protect)
 741 {
 742         u32 reg, bits, val;
 743
 744         /*
 745          * SHADOWCON/PRTCON register is used for enabling timing.
 746          *
 747          * for example, once only width value of a register is set,
 748          * if the dma is started then fimd hardware could malfunction so
 749          * with protect window setting, the register fields with prefix '_F'
 750          * wouldn't be updated at vsync also but updated once unprotect window
 751          * is set.
 752          */
 753
 754         if (ctx->driver_data->has_shadowcon) {
 755                 reg = SHADOWCON;
 756                 bits = SHADOWCON_WINx_PROTECT(win);
 757         } else {
 758                 reg = PRTCON;
 759                 bits = PRTCON_PROTECT;
 760         }
 761
 762         val = readl(ctx->regs + reg);
 763         if (protect)
 764                 val |= bits;
 765         else
 766                 val &= ~bits;
 767         writel(val, ctx->regs + reg);
 768 }
 769
 770 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc)
 771 {
 772         struct fimd_context *ctx = crtc->ctx;
 773         int i;
 774
 775         if (ctx->suspended)
 776                 return;
 777
 778         for (i = 0; i < WINDOWS_NR; i++)
 779                 fimd_shadow_protect_win(ctx, i, true);
 780 }
 781
 782 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc)
 783 {
 784         struct fimd_context *ctx = crtc->ctx;
 785         int i;
 786
 787         if (ctx->suspended)
 788                 return;
 789
 790         for (i = 0; i < WINDOWS_NR; i++)
 791                 fimd_shadow_protect_win(ctx, i, false);
 792
 793         exynos_crtc_handle_event(crtc);
 794 }
 795
 796 static void fimd_update_plane(struct exynos_drm_crtc *crtc,
 797                               struct exynos_drm_plane *plane)
 798 {
 799         struct exynos_drm_plane_state *state =
 800                                 to_exynos_plane_state(plane->base.state);
 801         struct fimd_context *ctx = crtc->ctx;
 802         struct drm_framebuffer *fb = state->base.fb;
 803         dma_addr_t dma_addr;
 804         unsigned long val, size, offset;
 805         unsigned int last_x, last_y, buf_offsize, line_size;
 806         unsigned int win = plane->index;
 807         unsigned int cpp = fb->format->cpp[0];
 808         unsigned int pitch = fb->pitches[0];
 809
 810         if (ctx->suspended)
 811                 return;
 812
 813         offset = state->src.x * cpp;
 814         offset += state->src.y * pitch;
 815
 816         /* buffer start address */
 817         dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset;
 818         val = (unsigned long)dma_addr;
 819         writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
 820
 821         /* buffer end address */
 822         size = pitch * state->crtc.h;
 823         val = (unsigned long)(dma_addr + size);
 824         writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
 825
 826         DRM_DEV_DEBUG_KMS(ctx->dev,
 827                           "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
 828                           (unsigned long)dma_addr, val, size);
 829         DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
 830                           state->crtc.w, state->crtc.h);
 831
 832         /* buffer size */
 833         buf_offsize = pitch - (state->crtc.w * cpp);
 834         line_size = state->crtc.w * cpp;
 835         val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
 836                 VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
 837                 VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
 838                 VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
 839         writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
 840
 841         /* OSD position */
 842         val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
 843                 VIDOSDxA_TOPLEFT_Y(state->crtc.y) |
 844                 VIDOSDxA_TOPLEFT_X_E(state->crtc.x) |
 845                 VIDOSDxA_TOPLEFT_Y_E(state->crtc.y);
 846         writel(val, ctx->regs + VIDOSD_A(win));
 847
 848         last_x = state->crtc.x + state->crtc.w;
 849         if (last_x)
 850                 last_x--;
 851         last_y = state->crtc.y + state->crtc.h;
 852         if (last_y)
 853                 last_y--;
 854
 855         val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
 856                 VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
 857
 858         writel(val, ctx->regs + VIDOSD_B(win));
 859
 860         DRM_DEV_DEBUG_KMS(ctx->dev,
 861                           "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
 862                           state->crtc.x, state->crtc.y, last_x, last_y);
 863
 864         /* OSD size */
 865         if (win != 3 && win != 4) {
 866                 u32 offset = VIDOSD_D(win);
 867                 if (win == 0)
 868                         offset = VIDOSD_C(win);
 869                 val = state->crtc.w * state->crtc.h;
 870                 writel(val, ctx->regs + offset);
 871
 872                 DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n",
 873                                   (unsigned int)val);
 874         }
 875
 876         fimd_win_set_pixfmt(ctx, win, fb, state->src.w);
 877
 878         /* hardware window 0 doesn't support color key. */
 879         if (win != 0)
 880                 fimd_win_set_colkey(ctx, win);
 881
 882         fimd_enable_video_output(ctx, win, true);
 883
 884         if (ctx->driver_data->has_shadowcon)
 885                 fimd_enable_shadow_channel_path(ctx, win, true);
 886
 887         if (ctx->i80_if)
 888                 atomic_set(&ctx->win_updated, 1);
 889 }
 890
 891 static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
 892                                struct exynos_drm_plane *plane)
 893 {
 894         struct fimd_context *ctx = crtc->ctx;
 895         unsigned int win = plane->index;
 896
 897         if (ctx->suspended)
 898                 return;
 899
 900         fimd_enable_video_output(ctx, win, false);
 901
 902         if (ctx->driver_data->has_shadowcon)
 903                 fimd_enable_shadow_channel_path(ctx, win, false);
 904 }
 905
 906 static void fimd_atomic_enable(struct exynos_drm_crtc *crtc)
 907 {
 908         struct fimd_context *ctx = crtc->ctx;
 909
 910         if (!ctx->suspended)
 911                 return;
 912
 913         ctx->suspended = false;
 914
 915         if (pm_runtime_resume_and_get(ctx->dev) < 0) {
 916                 dev_warn(ctx->dev, "failed to enable FIMD device.\n");
 917                 return;
 918         }
 919
 920         /* if vblank was enabled status, enable it again. */
 921         if (test_and_clear_bit(0, &ctx->irq_flags))
 922                 fimd_enable_vblank(ctx->crtc);
 923
 924         fimd_commit(ctx->crtc);
 925 }
 926
 927 static void fimd_atomic_disable(struct exynos_drm_crtc *crtc)
 928 {
 929         struct fimd_context *ctx = crtc->ctx;
 930         int i;
 931
 932         if (ctx->suspended)
 933                 return;
 934
 935         /*
 936          * We need to make sure that all windows are disabled before we
 937          * suspend that connector. Otherwise we might try to scan from
 938          * a destroyed buffer later.
 939          */
 940         for (i = 0; i < WINDOWS_NR; i++)
 941                 fimd_disable_plane(crtc, &ctx->planes[i]);
 942
 943         fimd_enable_vblank(crtc);
 944         fimd_wait_for_vblank(crtc);
 945         fimd_disable_vblank(crtc);
 946
 947         writel(0, ctx->regs + VIDCON0);
 948
 949         pm_runtime_put_sync(ctx->dev);
 950         ctx->suspended = true;
 951 }
 952
 953 static void fimd_trigger(struct device *dev)
 954 {
 955         struct fimd_context *ctx = dev_get_drvdata(dev);
 956         const struct fimd_driver_data *driver_data = ctx->driver_data;
 957         void *timing_base = ctx->regs + driver_data->timing_base;
 958         u32 reg;
 959
 960          /*
 961           * Skips triggering if in triggering state, because multiple triggering
 962           * requests can cause panel reset.
 963           */
 964         if (atomic_read(&ctx->triggering))
 965                 return;
 966
 967         /* Enters triggering mode */
 968         atomic_set(&ctx->triggering, 1);
 969
 970         reg = readl(timing_base + TRIGCON);
 971         reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE);
 972         writel(reg, timing_base + TRIGCON);
 973
 974         /*
 975          * Exits triggering mode if vblank is not enabled yet, because when the
 976          * VIDINTCON0 register is not set, it can not exit from triggering mode.
 977          */
 978         if (!test_bit(0, &ctx->irq_flags))
 979                 atomic_set(&ctx->triggering, 0);
 980 }
 981
 982 static void fimd_te_handler(struct exynos_drm_crtc *crtc)
 983 {
 984         struct fimd_context *ctx = crtc->ctx;
 985         u32 trg_type = ctx->driver_data->trg_type;
 986
 987         /* Checks the crtc is detached already from encoder */
 988         if (!ctx->drm_dev)
 989                 return;
 990
 991         if (trg_type == I80_HW_TRG)
 992                 goto out;
 993
 994         /*
 995          * If there is a page flip request, triggers and handles the page flip
 996          * event so that current fb can be updated into panel GRAM.
 997          */
 998         if (atomic_add_unless(&ctx->win_updated, -1, 0))
 999                 fimd_trigger(ctx->dev);
1000
1001 out:
1002         /* Wakes up vsync event queue */
1003         if (atomic_read(&ctx->wait_vsync_event)) {
1004                 atomic_set(&ctx->wait_vsync_event, 0);
1005                 wake_up(&ctx->wait_vsync_queue);
1006         }
1007
1008         if (test_bit(0, &ctx->irq_flags))
1009                 drm_crtc_handle_vblank(&ctx->crtc->base);
1010 }
1011
1012 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable)
1013 {
1014         struct fimd_context *ctx = container_of(clk, struct fimd_context,
1015                                                 dp_clk);
1016         u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
1017         writel(val, ctx->regs + DP_MIE_CLKCON);
1018 }
1019
1020 static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
1021         .atomic_enable = fimd_atomic_enable,
1022         .atomic_disable = fimd_atomic_disable,
1023         .enable_vblank = fimd_enable_vblank,
1024         .disable_vblank = fimd_disable_vblank,
1025         .atomic_begin = fimd_atomic_begin,
1026         .update_plane = fimd_update_plane,
1027         .disable_plane = fimd_disable_plane,
1028         .atomic_flush = fimd_atomic_flush,
1029         .atomic_check = fimd_atomic_check,
1030         .te_handler = fimd_te_handler,
1031 };
1032
1033 static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
1034 {
1035         struct fimd_context *ctx = (struct fimd_context *)dev_id;
1036         u32 val, clear_bit;
1037
1038         val = readl(ctx->regs + VIDINTCON1);
1039
1040         clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
1041         if (val & clear_bit)
1042                 writel(clear_bit, ctx->regs + VIDINTCON1);
1043
1044         /* check the crtc is detached already from encoder */
1045         if (!ctx->drm_dev)
1046                 goto out;
1047
1048         if (!ctx->i80_if)
1049                 drm_crtc_handle_vblank(&ctx->crtc->base);
1050
1051         if (ctx->i80_if) {
1052                 /* Exits triggering mode */
1053                 atomic_set(&ctx->triggering, 0);
1054         } else {
1055                 /* set wait vsync event to zero and wake up queue. */
1056                 if (atomic_read(&ctx->wait_vsync_event)) {
1057                         atomic_set(&ctx->wait_vsync_event, 0);
1058                         wake_up(&ctx->wait_vsync_queue);
1059                 }
1060         }
1061
1062 out:
1063         return IRQ_HANDLED;
1064 }
1065
1066 static int fimd_bind(struct device *dev, struct device *master, void *data)
1067 {
1068         struct fimd_context *ctx = dev_get_drvdata(dev);
1069         struct drm_device *drm_dev = data;
1070         struct exynos_drm_plane *exynos_plane;
1071         unsigned int i;
1072         int ret;
1073
1074         ctx->drm_dev = drm_dev;
1075
1076         for (i = 0; i < WINDOWS_NR; i++) {
1077                 ctx->configs[i].pixel_formats = fimd_formats;
1078                 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
1079                 ctx->configs[i].zpos = i;
1080                 ctx->configs[i].type = fimd_win_types[i];
1081                 ctx->configs[i].capabilities = capabilities[i];
1082                 ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
1083                                         &ctx->configs[i]);
1084                 if (ret)
1085                         return ret;
1086         }
1087
1088         exynos_plane = &ctx->planes[DEFAULT_WIN];
1089         ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
1090                         EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx);
1091         if (IS_ERR(ctx->crtc))
1092                 return PTR_ERR(ctx->crtc);
1093
1094         if (ctx->driver_data->has_dp_clk) {
1095                 ctx->dp_clk.enable = fimd_dp_clock_enable;
1096                 ctx->crtc->pipe_clk = &ctx->dp_clk;
1097         }
1098
1099         if (ctx->encoder)
1100                 exynos_dpi_bind(drm_dev, ctx->encoder);
1101
1102         if (is_drm_iommu_supported(drm_dev)) {
1103                 int ret;
1104
1105                 ret = fimd_clear_channels(ctx->crtc);
1106                 if (ret < 0)
1107                         return ret;
1108         }
1109
1110         return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv);
1111 }
1112
1113 static void fimd_unbind(struct device *dev, struct device *master,
1114                         void *data)
1115 {
1116         struct fimd_context *ctx = dev_get_drvdata(dev);
1117
1118         fimd_atomic_disable(ctx->crtc);
1119
1120         exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);
1121
1122         if (ctx->encoder)
1123                 exynos_dpi_remove(ctx->encoder);
1124 }
1125
1126 static const struct component_ops fimd_component_ops = {
1127         .bind   = fimd_bind,
1128         .unbind = fimd_unbind,
1129 };
1130
1131 static int fimd_probe(struct platform_device *pdev)
1132 {
1133         struct device *dev = &pdev->dev;
1134         struct fimd_context *ctx;
1135         struct device_node *i80_if_timings;
1136         struct resource *res;
1137         int ret;
1138
1139         if (!dev->of_node)
1140                 return -ENODEV;
1141
1142         ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
1143         if (!ctx)
1144                 return -ENOMEM;
1145
1146         ctx->dev = dev;
1147         ctx->suspended = true;
1148         ctx->driver_data = of_device_get_match_data(dev);
1149
1150         if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
1151                 ctx->vidcon1 |= VIDCON1_INV_VDEN;
1152         if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
1153                 ctx->vidcon1 |= VIDCON1_INV_VCLK;
1154
1155         i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
1156         if (i80_if_timings) {
1157                 u32 val;
1158
1159                 ctx->i80_if = true;
1160
1161                 if (ctx->driver_data->has_vidoutcon)
1162                         ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
1163                 else
1164                         ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
1165                 /*
1166                  * The user manual describes that this "DSI_EN" bit is required
1167                  * to enable I80 24-bit data interface.
1168                  */
1169                 ctx->vidcon0 |= VIDCON0_DSI_EN;
1170
1171                 if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
1172                         val = 0;
1173                 ctx->i80ifcon = LCD_CS_SETUP(val);
1174                 if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
1175                         val = 0;
1176                 ctx->i80ifcon |= LCD_WR_SETUP(val);
1177                 if (of_property_read_u32(i80_if_timings, "wr-active", &val))
1178                         val = 1;
1179                 ctx->i80ifcon |= LCD_WR_ACTIVE(val);
1180                 if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
1181                         val = 0;
1182                 ctx->i80ifcon |= LCD_WR_HOLD(val);
1183         }
1184         of_node_put(i80_if_timings);
1185
1186         ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
1187                                                         "samsung,sysreg");
1188         if (IS_ERR(ctx->sysreg)) {
1189                 dev_warn(dev, "failed to get system register.\n");
1190                 ctx->sysreg = NULL;
1191         }
1192
1193         ctx->bus_clk = devm_clk_get(dev, "fimd");
1194         if (IS_ERR(ctx->bus_clk)) {
1195                 dev_err(dev, "failed to get bus clock\n");
1196                 return PTR_ERR(ctx->bus_clk);
1197         }
1198
1199         ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
1200         if (IS_ERR(ctx->lcd_clk)) {
1201                 dev_err(dev, "failed to get lcd clock\n");
1202                 return PTR_ERR(ctx->lcd_clk);
1203         }
1204
1205         ctx->regs = devm_platform_ioremap_resource(pdev, 0);
1206         if (IS_ERR(ctx->regs))
1207                 return PTR_ERR(ctx->regs);
1208
1209         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
1210                                            ctx->i80_if ? "lcd_sys" : "vsync");
1211         if (!res) {
1212                 dev_err(dev, "irq request failed.\n");
1213                 return -ENXIO;
1214         }
1215
1216         ret = devm_request_irq(dev, res->start, fimd_irq_handler,
1217                                                         0, "drm_fimd", ctx);
1218         if (ret) {
1219                 dev_err(dev, "irq request failed.\n");
1220                 return ret;
1221         }
1222
1223         init_waitqueue_head(&ctx->wait_vsync_queue);
1224         atomic_set(&ctx->wait_vsync_event, 0);
1225
1226         platform_set_drvdata(pdev, ctx);
1227
1228         ctx->encoder = exynos_dpi_probe(dev);
1229         if (IS_ERR(ctx->encoder))
1230                 return PTR_ERR(ctx->encoder);
1231
1232         pm_runtime_enable(dev);
1233
1234         ret = component_add(dev, &fimd_component_ops);
1235         if (ret)
1236                 goto err_disable_pm_runtime;
1237
1238         return ret;
1239
1240 err_disable_pm_runtime:
1241         pm_runtime_disable(dev);
1242
1243         return ret;
1244 }
1245
1246 static int fimd_remove(struct platform_device *pdev)
1247 {
1248         pm_runtime_disable(&pdev->dev);
1249
1250         component_del(&pdev->dev, &fimd_component_ops);
1251
1252         return 0;
1253 }
1254
1255 #ifdef CONFIG_PM
1256 static int exynos_fimd_suspend(struct device *dev)
1257 {
1258         struct fimd_context *ctx = dev_get_drvdata(dev);
1259
1260         clk_disable_unprepare(ctx->lcd_clk);
1261         clk_disable_unprepare(ctx->bus_clk);
1262
1263         return 0;
1264 }
1265
1266 static int exynos_fimd_resume(struct device *dev)
1267 {
1268         struct fimd_context *ctx = dev_get_drvdata(dev);
1269         int ret;
1270
1271         ret = clk_prepare_enable(ctx->bus_clk);
1272         if (ret < 0) {
1273                 DRM_DEV_ERROR(dev,
1274                               "Failed to prepare_enable the bus clk [%d]\n",
1275                               ret);
1276                 return ret;
1277         }
1278
1279         ret = clk_prepare_enable(ctx->lcd_clk);
1280         if  (ret < 0) {
1281                 DRM_DEV_ERROR(dev,
1282                               "Failed to prepare_enable the lcd clk [%d]\n",
1283                               ret);
1284                 return ret;
1285         }
1286
1287         return 0;
1288 }
1289 #endif
1290
1291 static const struct dev_pm_ops exynos_fimd_pm_ops = {
1292         SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL)
1293         SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
1294                                 pm_runtime_force_resume)
1295 };
1296
1297 struct platform_driver fimd_driver = {
1298         .probe          = fimd_probe,
1299         .remove         = fimd_remove,
1300         .driver         = {
1301                 .name   = "exynos4-fb",
1302                 .owner  = THIS_MODULE,
1303                 .pm     = &exynos_fimd_pm_ops,
1304                 .of_match_table = fimd_driver_dt_match,
1305         },
1306 };