1 # SPDX-License-Identifier: GPL-2.0-only
3 # Drm device configuration
5 # This driver provides support for the
6 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
9 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
10 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
11 select DRM_PANEL_ORIENTATION_QUIRKS
16 select DMA_SHARED_BUFFER
19 Kernel-level support for the Direct Rendering Infrastructure (DRI)
20 introduced in XFree86 4.0. If you say Y here, you need to select
21 the module that's right for your graphics card from the list below.
22 These modules provide support for synchronization, security, and
23 DMA transfers. Please see <http://dri.sourceforge.net/> for more
24 details. You should also select and configure AGP
25 (/dev/agpgart) support if it is available for your platform.
35 config DRM_DP_AUX_CHARDEV
36 bool "DRM DP AUX Interface"
39 Choose this option to enable a /dev/drm_dp_auxN node that allows to
40 read and write values to arbitrary DPCD registers on the DP aux
44 bool "Insert extra checks and debug info into the DRM range managers"
47 depends on STACKTRACE_SUPPORT
50 Enable allocation tracking of memory manager and leak detection on
53 Recommended for driver developers only.
57 config DRM_DEBUG_SELFTEST
58 tristate "kselftests for DRM"
60 depends on DEBUG_KERNEL
64 select DRM_EXPORT_FOR_TESTS if m
67 This option provides kernel modules that can be used to run
68 various selftests on parts of the DRM api. This option is not
69 useful for distributions or general kernels, but only for kernel
70 developers working on DRM and associated drivers.
78 CRTC helpers for KMS drivers.
80 config DRM_KMS_FB_HELPER
82 depends on DRM_KMS_HELPER
84 select FRAMEBUFFER_CONSOLE if !EXPERT
85 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
87 select FB_SYS_FILLRECT
88 select FB_SYS_COPYAREA
89 select FB_SYS_IMAGEBLIT
90 select FB_CFB_FILLRECT
91 select FB_CFB_COPYAREA
92 select FB_CFB_IMAGEBLIT
95 FBDEV helpers for KMS drivers.
97 config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
98 bool "Enable refcount backtrace history in the DP MST helpers"
99 depends on STACKTRACE_SUPPORT
101 depends on DRM_KMS_HELPER
102 depends on DEBUG_KERNEL
105 Enables debug tracing for topology refs in DRM's DP MST helpers. A
106 history of each topology reference/dereference will be printed to the
107 kernel log once a port or branch device's topology refcount reaches 0.
109 This has the potential to use a lot of memory and print some very
110 large kernel messages. If in doubt, say "N".
112 config DRM_FBDEV_EMULATION
113 bool "Enable legacy fbdev support for your modesetting driver"
115 select DRM_KMS_HELPER
116 select DRM_KMS_FB_HELPER
119 Choose this option if you have a need for the legacy fbdev
120 support. Note that this support also provides the linux console
121 support on top of your modesetting driver.
123 If in doubt, say "Y".
125 config DRM_FBDEV_OVERALLOC
126 int "Overallocation of the fbdev buffer"
127 depends on DRM_FBDEV_EMULATION
130 Defines the fbdev buffer overallocation in percent. Default
131 is 100. Typical values for double buffering will be 200,
132 triple buffering 300.
134 config DRM_FBDEV_LEAK_PHYS_SMEM
135 bool "Shamelessly allow leaking of fbdev physical address (DANGEROUS)"
136 depends on DRM_FBDEV_EMULATION && EXPERT
139 In order to keep user-space compatibility, we want in certain
140 use-cases to keep leaking the fbdev physical address to the
141 user-space program handling the fbdev buffer.
142 This affects, not only, Amlogic, Allwinner or Rockchip devices
143 with ARM Mali GPUs using an userspace Blob.
144 This option is not supported by upstream developers and should be
145 removed as soon as possible and be considered as a broken and
146 legacy behaviour from a modern fbdev device driver.
148 Please send any bug reports when using this to your proprietary
149 software vendor that requires this.
151 If in doubt, say "N" or spread the word to your closed source
154 config DRM_LOAD_EDID_FIRMWARE
155 bool "Allow to specify an EDID data set instead of probing for it"
158 Say Y here, if you want to use EDID data to be loaded from the
159 /lib/firmware directory or one of the provided built-in
160 data sets. This may be necessary, if the graphics adapter or
161 monitor are unable to provide appropriate EDID data. Since this
162 feature is provided as a workaround for broken hardware, the
163 default case is N. Details and instructions how to build your own
164 EDID data are given in Documentation/admin-guide/edid.rst.
167 bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
171 Choose this option if you want to enable HDMI CEC support for
172 DisplayPort/USB-C to HDMI adapters.
174 Note: not all adapters support this feature, and even for those
175 that do support this they often do not hook up the CEC pin.
179 depends on DRM && MMU
181 GPU memory management subsystem for devices with multiple
182 GPU memory types. Will be enabled automatically if a device driver
185 config DRM_VRAM_HELPER
189 Helpers for VRAM memory management
191 config DRM_TTM_HELPER
196 Helpers for ttm-based gem objects
198 config DRM_GEM_CMA_HELPER
202 Choose this if you need the GEM CMA helper functions
204 config DRM_KMS_CMA_HELPER
207 select DRM_GEM_CMA_HELPER
209 Choose this if you need the KMS CMA helper functions
211 config DRM_GEM_SHMEM_HELPER
215 Choose this if you need the GEM shmem helper functions
219 depends on DRM && MMU
225 source "drivers/gpu/drm/i2c/Kconfig"
227 source "drivers/gpu/drm/arm/Kconfig"
230 tristate "ATI Radeon"
231 depends on DRM && PCI && MMU
233 select DRM_KMS_HELPER
237 select BACKLIGHT_CLASS_DEVICE
240 Choose this option if you have an ATI Radeon graphics card. There
241 are both PCI and AGP versions. You don't need to choose this to
242 run the Radeon in plain VGA mode.
244 If M is selected, the module will be called radeon.
246 source "drivers/gpu/drm/radeon/Kconfig"
250 depends on DRM && PCI && MMU
252 select DRM_KMS_HELPER
257 select BACKLIGHT_CLASS_DEVICE
261 Choose this option if you have a recent AMD Radeon graphics card.
263 If M is selected, the module will be called amdgpu.
265 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
267 source "drivers/gpu/drm/nouveau/Kconfig"
269 source "drivers/gpu/drm/i915/Kconfig"
271 source "drivers/gpu/drm/kmb/Kconfig"
274 tristate "Virtual GEM provider"
277 Choose this option to get a virtual graphics memory manager,
278 as used by Mesa's software renderer for enhanced performance.
279 If M is selected the module will be called vgem.
282 tristate "Virtual KMS (EXPERIMENTAL)"
284 select DRM_KMS_HELPER
285 select DRM_GEM_SHMEM_HELPER
289 Virtual Kernel Mode-Setting (VKMS) is used for testing or for
290 running GPU in a headless machines. Choose this option to get
293 If M is selected the module will be called vkms.
295 source "drivers/gpu/drm/exynos/Kconfig"
297 source "drivers/gpu/drm/rockchip/Kconfig"
299 source "drivers/gpu/drm/vmwgfx/Kconfig"
301 source "drivers/gpu/drm/gma500/Kconfig"
303 source "drivers/gpu/drm/udl/Kconfig"
305 source "drivers/gpu/drm/ast/Kconfig"
307 source "drivers/gpu/drm/mgag200/Kconfig"
309 source "drivers/gpu/drm/armada/Kconfig"
311 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
313 source "drivers/gpu/drm/rcar-du/Kconfig"
315 source "drivers/gpu/drm/shmobile/Kconfig"
317 source "drivers/gpu/drm/sun4i/Kconfig"
319 source "drivers/gpu/drm/omapdrm/Kconfig"
321 source "drivers/gpu/drm/tilcdc/Kconfig"
323 source "drivers/gpu/drm/qxl/Kconfig"
325 source "drivers/gpu/drm/bochs/Kconfig"
327 source "drivers/gpu/drm/virtio/Kconfig"
329 source "drivers/gpu/drm/msm/Kconfig"
331 source "drivers/gpu/drm/fsl-dcu/Kconfig"
333 source "drivers/gpu/drm/tegra/Kconfig"
335 source "drivers/gpu/drm/stm/Kconfig"
337 source "drivers/gpu/drm/panel/Kconfig"
339 source "drivers/gpu/drm/bridge/Kconfig"
341 source "drivers/gpu/drm/sti/Kconfig"
343 source "drivers/gpu/drm/imx/Kconfig"
345 source "drivers/gpu/drm/ingenic/Kconfig"
347 source "drivers/gpu/drm/v3d/Kconfig"
349 source "drivers/gpu/drm/vc4/Kconfig"
351 source "drivers/gpu/drm/etnaviv/Kconfig"
353 source "drivers/gpu/drm/arc/Kconfig"
355 source "drivers/gpu/drm/hisilicon/Kconfig"
357 source "drivers/gpu/drm/mediatek/Kconfig"
359 source "drivers/gpu/drm/zte/Kconfig"
361 source "drivers/gpu/drm/mxsfb/Kconfig"
363 source "drivers/gpu/drm/meson/Kconfig"
365 source "drivers/gpu/drm/tiny/Kconfig"
367 source "drivers/gpu/drm/pl111/Kconfig"
369 source "drivers/gpu/drm/tve200/Kconfig"
371 source "drivers/gpu/drm/xen/Kconfig"
373 source "drivers/gpu/drm/vboxvideo/Kconfig"
375 source "drivers/gpu/drm/lima/Kconfig"
377 source "drivers/gpu/drm/panfrost/Kconfig"
379 source "drivers/gpu/drm/aspeed/Kconfig"
381 source "drivers/gpu/drm/mcde/Kconfig"
383 source "drivers/gpu/drm/tidss/Kconfig"
385 source "drivers/gpu/drm/xlnx/Kconfig"
387 # Keep legacy drivers last
389 menuconfig DRM_LEGACY
390 bool "Enable legacy drivers (DANGEROUS)"
391 depends on DRM && MMU
394 Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
395 APIs to user-space, which can be used to circumvent access
396 restrictions and other security measures. For backwards compatibility
397 those drivers are still available, but their use is highly
398 inadvisable and might harm your system.
400 You are recommended to use the safe modeset-only drivers instead, and
401 perform 3D emulation in user-space.
403 Unless you have strong reasons to go rogue, say "N".
408 tristate "3dfx Banshee/Voodoo3+"
409 depends on DRM && PCI
411 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
412 graphics card. If M is selected, the module will be called tdfx.
415 tristate "ATI Rage 128"
416 depends on DRM && PCI
419 Choose this option if you have an ATI Rage 128 graphics card. If M
420 is selected, the module will be called r128. AGP support for
421 this card is strongly suggested (unless you have a PCI version).
424 tristate "Intel I810"
425 # !PREEMPTION because of missing ioctl locking
426 depends on DRM && AGP && AGP_INTEL && (!PREEMPTION || BROKEN)
428 Choose this option if you have an Intel I810 graphics card. If M is
429 selected, the module will be called i810. AGP support is required
430 for this driver to work.
433 tristate "Matrox g200/g400"
434 depends on DRM && PCI
437 Choose this option if you have a Matrox G200, G400 or G450 graphics
438 card. If M is selected, the module will be called mga. AGP
439 support is required for this driver to work.
442 tristate "SiS video cards"
443 depends on DRM && AGP
444 depends on FB_SIS || FB_SIS=n
446 Choose this option if you have a SiS 630 or compatible video
447 chipset. If M is selected the module will be called sis. AGP
448 support is required for this driver to work.
451 tristate "Via unichrome video cards"
452 depends on DRM && PCI
454 Choose this option if you have a Via unichrome or compatible video
455 chipset. If M is selected the module will be called via.
458 tristate "Savage video cards"
459 depends on DRM && PCI
461 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
462 chipset. If M is selected the module will be called savage.
466 config DRM_EXPORT_FOR_TESTS
469 # Separate option because drm_panel_orientation_quirks.c is shared with fbdev
470 config DRM_PANEL_ORIENTATION_QUIRKS
473 config DRM_LIB_RANDOM