1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2013 TangoTec Ltd.
4 * Author: Baruch Siach <baruch@tkos.co.il>
6 * Driver for the Xtensa LX4 GPIO32 Option
8 * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
10 * GPIO32 is a standard optional extension to the Xtensa architecture core that
11 * provides preconfigured output and input ports for intra SoC signaling. The
12 * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
13 * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
14 * driver treats input and output states as two distinct devices.
16 * Access to GPIO32 specific instructions is controlled by the CPENABLE
17 * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
18 * disables access to all coprocessors. This driver sets the CPENABLE bit
19 * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
20 * CPENABLE state after that.
22 * This driver is currently incompatible with SMP. The GPIO32 extension is not
23 * guaranteed to be available in all cores. Moreover, each core controls a
24 * different set of IO wires. A theoretical SMP aware version of this driver
25 * would need to have a per core workqueue to do the actual GPIO manipulation.
28 #include <linux/err.h>
29 #include <linux/module.h>
30 #include <linux/gpio/driver.h>
31 #include <linux/bitops.h>
32 #include <linux/platform_device.h>
34 #include <asm/coprocessor.h> /* CPENABLE read/write macros */
36 #ifndef XCHAL_CP_ID_XTIOP
37 #error GPIO32 option is not enabled for your xtensa core variant
42 static inline unsigned long enable_cp(unsigned long *cpenable)
46 local_irq_save(flags);
47 *cpenable = xtensa_get_sr(cpenable);
48 xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
52 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
54 xtensa_set_sr(cpenable, cpenable);
55 local_irq_restore(flags);
60 static inline unsigned long enable_cp(unsigned long *cpenable)
62 *cpenable = 0; /* avoid uninitialized value warning */
66 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
70 #endif /* XCHAL_HAVE_CP */
72 static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
74 return GPIO_LINE_DIRECTION_IN; /* input only */
77 static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
79 unsigned long flags, saved_cpenable;
82 flags = enable_cp(&saved_cpenable);
83 __asm__ __volatile__("read_impwire %0" : "=a" (impwire));
84 disable_cp(flags, saved_cpenable);
86 return !!(impwire & BIT(offset));
89 static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
92 BUG(); /* output only; should never be called */
95 static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
97 return GPIO_LINE_DIRECTION_OUT; /* output only */
100 static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
102 unsigned long flags, saved_cpenable;
105 flags = enable_cp(&saved_cpenable);
106 __asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
107 disable_cp(flags, saved_cpenable);
109 return !!(expstate & BIT(offset));
112 static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
115 unsigned long flags, saved_cpenable;
116 u32 mask = BIT(offset);
117 u32 val = value ? BIT(offset) : 0;
119 flags = enable_cp(&saved_cpenable);
120 __asm__ __volatile__("wrmsk_expstate %0, %1"
121 :: "a" (val), "a" (mask));
122 disable_cp(flags, saved_cpenable);
125 static struct gpio_chip impwire_chip = {
129 .get_direction = xtensa_impwire_get_direction,
130 .get = xtensa_impwire_get_value,
131 .set = xtensa_impwire_set_value,
134 static struct gpio_chip expstate_chip = {
138 .get_direction = xtensa_expstate_get_direction,
139 .get = xtensa_expstate_get_value,
140 .set = xtensa_expstate_set_value,
143 static int xtensa_gpio_probe(struct platform_device *pdev)
147 ret = gpiochip_add_data(&impwire_chip, NULL);
150 return gpiochip_add_data(&expstate_chip, NULL);
153 static struct platform_driver xtensa_gpio_driver = {
155 .name = "xtensa-gpio",
157 .probe = xtensa_gpio_probe,
160 static int __init xtensa_gpio_init(void)
162 struct platform_device *pdev;
164 pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
166 return PTR_ERR(pdev);
168 return platform_driver_register(&xtensa_gpio_driver);
170 device_initcall(xtensa_gpio_init);
172 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
173 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
174 MODULE_LICENSE("GPL");